MFC r274670, r274671, r276168:

Moves all the duplicate code to a single function.

Verify for invalid modes and unwanted flags before pass the new flags to
driver.

Make gpio_default_map_gpios() static. No functional changes.

Improves the GPIO API description a little bit.

gpio_pin_max must return the maximum supported pin number and not the total
number of pins on the system.

MFC r273799:

Make the GPIO children attach to the first unit available and not only to
unit 0.

This fix a bug where a GPIO controller could fail to attach its children
(gpioc and gpiobus) if another GPIO driver attach first.

MFC r277454, r277460, r277465, r277466, r277467, r277469, r277470, r277471,
r277472, r277473, r277474, r277475, r277476, r277477, r277478, r277479,
r277480, r277512, r277516:

Add inline implementations of arm bus_space_read/write_N().

Revise the arm bus_space implementation to avoid dereferencing the tag on
every operation to retrieve the bs_cookie value almost nothing actually uses.

Use the explicit member initializer style to init the bus_space struct.

Use arm/bus_space-v6.c for all armv6 systems

Consolidate many identical implementations of bus_space to a single
common tag and implementation shared by armv4 and armv6.

Micro-optimize the new arm inline bus_space implementation by grouping all
the data the inline functions access together at the start of the bus_space
struct so that they all fit in a single cache line.

MFC r257740, r257739: Switch to using common armv6 bus_space tag.

MFC r276047: Add -march=armv7a to the kernel compile for all v7a ARM systems.

MFC r270945:

Rename OF_xref_phandle() to OF_node_from_xref() and add a new function
that provides the inverse translation, OF_xref_from_node().

MFC r257200, r259121, r261410, r265853:

- Remove #include <machine/frame.h>.
- Add gpio parse routines according to sys/boot/fdt/dts/bindings-gpio.txt.
- Follow r261352 by updating all drivers which are children of simplebus
to check the status property in their probe routines.
- Rename platform_gpio_init to be SoC specific, and make it static as it's
only called from this file.

This is mostly catching up on some old MFCs that were done before this file
existed in the 10 branch.

MFC 265624, 265739: Fix interrupt parent property in dts, add SMP support.

MFC 265207: Use arm_devmap_add_entry() to setup static device mapping.

MFC 263631, 263637, 263664, 263676, 263679, 263698, 263711,

Implement __flt_rounds for ARMv6 hard-float. The fpscr register stores the
current rounding mode used by the VFP unit.

Simplify how we build MACHINE_ARCH. There are 3 options that may be set
however only arm, armeb, armv6, and soon armv6hf will be used.

Add the llvm/clang patch for r263619.

Reorder the pmap macros so "ARM_MMU_V6 + ARM_MMU_V7" is first. As they are
identical this allows us to build for both v6 and v7 together.

Add code for enabling second CPU core for A20 SoC.
Enable SMP on Cubieboard2.

Switch to freebsd.org emal address in copyright.

MFC 262952, 262958, 262966, 262979, 262980, 262986, 262987, 262995, 262997,
263030, 263033, 263034, 263056, 263057,

Remove all the redundant external declarations of exception vectors and
runtime setting of the pointers that's scattered around various places.

Remove all traces of support for ARM chips prior to the arm9 series.

Make the default exception handler vectors point to where I thought they
were already pointing: the default handlers (not a panic that says there
is no default handler).

Eliminate irq_dispatch.S. Move the data items it contained into
arm/intr.c and the functionality it provided into arm/exception.S.

Move the exception vector table (so-called "page0" data) into exception.S
and eliminate vectors.S.

Change the way the asm GET_CURTHREAD_PTR() macro is defined so that code
using it doesn't have to have an "AST_LOCALS" macro somewhere in the file.

Arrange for arm fork_trampoline() to return to userland via the standard
swi_exit code in exception.S instead of having its own inline expansion
of the DO_AST and PULLFRAME macros.

Now that the PUSHFRAME and PULLFRAME macros are used only in the swi
entry/exit code, they don't need to be macros. Except that didn't work
and the whole change was reverted.

Remove some unnecessary indirection and jump right to the handler functions.

Use panic rather than printf to "handle" an arm26 address exception
(should never happen on arm32).

Remove the unreferenced DATA() macro.

Remove #include <machine/asmacros.h> from files that don't need it.

MFC 257774, 256760, 262916, 262905, 262918, 262919, 262920, 262921, 262924,
262925, 262929, 262932, 262935, 262940, 262941, 262942, 262948, 262949,
262950

Strip arm/conf/DEFAULTS down to just items that are mandatory for running
the architecture.

Move all the files named foo/common.c to foo/foo_common.c

Initial cut for DTS on the hl201 board.

Add commented out dts for sam9260ek as well as early printf support.

Make clock optional on uart nodes, then back it out ("I don't know what I
was thinking, but it is lame.")

Set the baud rate if it isn't 0

Make at91_soc_id() public.

Properly round at91 resource on unmapping.

Move AT91 AIC related stuff to own file.

Fix another bug in multicast filtering. i.MX uses 6 bits from MSB in
LE CRC32 for the hash value, not the lowest 6 bits in BE CRC32.

Follow r262916 with one more config file that references a renamed common.c

Remove bogus AT91 define that causes compile errors. Most of the defines
for SAM9X are going away soonish anyway (once FDT works), but until
then...

Remove all dregs of a per-thread undefined-exception-mode stack.

Rework the VFP code that handles demand-based save and restore of state.

Always call vfp_discard() on thread death.

When a thread begins life it doesn't own the VFP hardware state on any cpu.

Make undefined exception entry MP-safe.

MFC r261410

Follow r261352 by updating all drivers which are children of simplebus
to check the status property in their probe routines.

MFC r258546: Add watchdog driver for rk3188.

MFC r261252, r261279, r261304, r261305, r261322, r261336, r261337, r261338,
r261353

Fix the name of the dts file for the HL201...

When mapping an address, the bsh needs the same offset we do for other things.

Add explicit depends on bus_if.h and device_if.h to avoid a
chicken and egg problem in some compilation environments.

Switch to using PAs rather than VAs for the addresses we map for
devices. This is a nop, except for what's reported by atmelbus for the
resources.

Comment cleanups. Move things around for diff reduction against FDT work.

MFC r257669, r257672, r257673, r257676, r257678:

Call initarm_lastaddr() later in the init sequence, after establishing
static device mappings, rather than as the first of the initializations
that a platform can hook into. This allows a platform to allocate KVA
from the top of the address space downwards for things like static device
mapping, and return the final "last usable address" result after that and
other early init work is done.

Because some platforms were doing work in initarm_lastaddr() that needs to
be done early, add a new initarm_early_init() routine and move the early
init code to that routine on those platforms.

Make PTE_DEVICE a synonym for PTE_NOCACHE on armv4, to make it easier to
share the same code on both architectures.

Add new helper routines for arm static device mapping. The new code
allocates kva space from the top down for the device mappings and builds
entries in an internal table which is automatically used later by
arm_devmap_bootstrap(). The platform code just calls the new
arm_devmap_add_entry() function as many times as it needs to (up to 32
entries allowed; most platforms use 2 or 3 at most).

Remove imx local devmap code and use the essentially identical common
code that got moved from imx_machdep.c to arm/devmap.c.

MFC r257648, r257649, r257660:

Begin reducing code duplication in arm pmap.c and pmap-v6.c by factoring
out common code related to mapping device memory into a new devmap.c file.

Remove the growing duplication of code that used pmap_devmap_find_pa() and
then did some math with the returned results to generate a virtual address,
and likewise in reverse to get a physical address. Now there are a pair
of functions, arm_devmap_vtop() and arm_devmap_ptov(), to do that. The
bus_space_map() implementations are rewritten in terms of these.

Move remaining code and data related to static device mapping into the
new devmap.[ch] files. Emphasize the MD nature of these things by using
the prefix arm_devmap_ on the function and type names (already a few of
these things found their way into MI code, hopefully it will be harder to
do by accident in the future).

MFC r257201, r257202

Retire arm_remap_nocache() and the data and constants associated with it.

MFC r257199, r257200, r257217:

Remove all #include <machine/pmap.h> from arm code. It's already
included by vm/pmap.h, which is a prerequisite for arm/machine/pmap.h
so there's no reason to ever include it directly.

Remove #include <machine/frame.h> from all the arm code that doesn't
really need it. That would be almost everywhere it was included. Add
it in a couple files that really do need it and were previously getting
it by accident via another header.

Remove the last dregs of trapframe_t. It turns out only arm was using
this type, so remove it to make arm code more consistant with other
platforms.

MFC r256949: Import basic support for Rockchip RK3188 SoC.

Import basic support for Rockchip RK3188 SoC.

Reviewed by: ray@