#
535af610 |
|
10-Aug-2023 |
Ed Maste <emaste@FreeBSD.org> |
ssh: Update to OpenSSH 9.4p1 Excerpts from the release notes: * ssh-agent(1): PKCS#11 modules must now be specified by their full paths. Previously dlopen(3) could search for them in system library directories. * ssh(1): allow forwarding Unix Domain sockets via ssh -W. * ssh(1): add support for configuration tags to ssh(1). This adds a ssh_config(5) "Tag" directive and corresponding "Match tag" predicate that may be used to select blocks of configuration similar to the pf.conf(5) keywords of the same name. * ssh(1): add a "match localnetwork" predicate. This allows matching on the addresses of available network interfaces and may be used to vary the effective client configuration based on network location. * ssh-agent(1): improve isolation between loaded PKCS#11 modules by running separate ssh-pkcs11-helpers for each loaded provider. * ssh-agent(1), ssh(1): improve defences against invalid PKCS#11 modules being loaded by checking that the requested module contains the required symbol before loading it. * ssh(1): don't incorrectly disable hostname canonicalization when CanonicalizeHostname=yes and ProxyJump was expicitly set to "none". bz3567 Full release notes at https://www.openssh.com/txt/release-9.4 Relnotes: Yes Sponsored by: The FreeBSD Foundation
|
#
4d3fc8b0 |
|
16-Mar-2023 |
Ed Maste <emaste@FreeBSD.org> |
ssh: Update to OpenSSH 9.3p1 This release fixes a number of security bugs and has minor new features and bug fixes. Security fixes, from the release notes (https://www.openssh.com/txt/release-9.3): This release contains fixes for a security problem and a memory safety problem. The memory safety problem is not believed to be exploitable, but we report most network-reachable memory faults as security bugs. * ssh-add(1): when adding smartcard keys to ssh-agent(1) with the per-hop destination constraints (ssh-add -h ...) added in OpenSSH 8.9, a logic error prevented the constraints from being communicated to the agent. This resulted in the keys being added without constraints. The common cases of non-smartcard keys and keys without destination constraints are unaffected. This problem was reported by Luci Stanescu. * ssh(1): Portable OpenSSH provides an implementation of the getrrsetbyname(3) function if the standard library does not provide it, for use by the VerifyHostKeyDNS feature. A specifically crafted DNS response could cause this function to perform an out-of-bounds read of adjacent stack data, but this condition does not appear to be exploitable beyond denial-of- service to the ssh(1) client. The getrrsetbyname(3) replacement is only included if the system's standard library lacks this function and portable OpenSSH was not compiled with the ldns library (--with-ldns). getrrsetbyname(3) is only invoked if using VerifyHostKeyDNS to fetch SSHFP records. This problem was found by the Coverity static analyzer. Sponsored by: The FreeBSD Foundation
|
#
1323ec57 |
|
13-Apr-2022 |
Ed Maste <emaste@FreeBSD.org> |
ssh: update to OpenSSH v8.9p1 Release notes are available at https://www.openssh.com/txt/release-8.9 Some highlights: * ssh(1), sshd(8), ssh-add(1), ssh-agent(1): add a system for restricting forwarding and use of keys added to ssh-agent(1) * ssh(1), sshd(8): add the sntrup761x25519-sha512@openssh.com hybrid ECDH/x25519 + Streamlined NTRU Prime post-quantum KEX to the default KEXAlgorithms list (after the ECDH methods but before the prime-group DH ones). The next release of OpenSSH is likely to make this key exchange the default method. * sshd(8), portable OpenSSH only: this release removes in-built support for MD5-hashed passwords. If you require these on your system then we recommend linking against libxcrypt or similar. Future deprecation notice ========================= A near-future release of OpenSSH will switch scp(1) from using the legacy scp/rcp protocol to using SFTP by default. Legacy scp/rcp performs wildcard expansion of remote filenames (e.g. "scp host:* .") through the remote shell. This has the side effect of requiring double quoting of shell meta-characters in file names included on scp(1) command-lines, otherwise they could be interpreted as shell commands on the remote side. MFC after: 1 month Relnotes: Yes Sponsored by: The FreeBSD Foundation
|
#
19261079 |
|
07-Sep-2021 |
Ed Maste <emaste@FreeBSD.org> |
openssh: update to OpenSSH v8.7p1 Some notable changes, from upstream's release notes: - sshd(8): Remove support for obsolete "host/port" syntax. - ssh(1): When prompting whether to record a new host key, accept the key fingerprint as a synonym for "yes". - ssh-keygen(1): when acting as a CA and signing certificates with an RSA key, default to using the rsa-sha2-512 signature algorithm. - ssh(1), sshd(8), ssh-keygen(1): this release removes the "ssh-rsa" (RSA/SHA1) algorithm from those accepted for certificate signatures. - ssh-sk-helper(8): this is a new binary. It is used by the FIDO/U2F support to provide address-space isolation for token middleware libraries (including the internal one). - ssh(1): this release enables UpdateHostkeys by default subject to some conservative preconditions. - scp(1): this release changes the behaviour of remote to remote copies (e.g. "scp host-a:/path host-b:") to transfer through the local host by default. - scp(1): experimental support for transfers using the SFTP protocol as a replacement for the venerable SCP/RCP protocol that it has traditionally used. Additional integration work is needed to support FIDO/U2F in the base system. Deprecation Notice ------------------ OpenSSH will disable the ssh-rsa signature scheme by default in the next release. Reviewed by: imp MFC after: 1 month Relnotes: Yes Sponsored by: The FreeBSD Foundation Differential Revision: https://reviews.freebsd.org/D29985
|
#
2f513db7 |
|
14-Feb-2020 |
Ed Maste <emaste@FreeBSD.org> |
Upgrade to OpenSSH 7.9p1. MFC after: 2 months Sponsored by: The FreeBSD Foundation
|
#
2a01feab |
|
06-Oct-2018 |
Ed Maste <emaste@FreeBSD.org> |
openssh: cherry-pick OpenSSL 1.1.1 compatibility Compatibility with existing OpenSSL versions is maintained. Upstream commits: 482d23bcac upstream: hold our collective noses and use the openssl-1.1.x 48f54b9d12 adapt -portable to OpenSSL 1.1x API 86e0a9f3d2 upstream: use only openssl-1.1.x API here too a3fd8074e2 upstream: missed a bit of openssl-1.0.x API in this unittest cce8cbe0ed Fix openssl-1.1 fallout for --without-openssl. Trivial conflicts in sshkey.c and test_sshkey.c were resolved. Connect libressl-api-compat.c to the build, and regenerate config.h Reviewed by: des Approved by: re (rgrimes) MFC after: 2 seeks Sponsored by: The FreeBSD Foundation Differential Revision: https://reviews.freebsd.org/D17444
|
#
190cef3d |
|
10-Sep-2018 |
Dag-Erling Smørgrav <des@FreeBSD.org> |
Upgrade to OpenSSH 7.8p1. Approved by: re (kib@)
|
#
47dd1d1b |
|
11-May-2018 |
Dag-Erling Smørgrav <des@FreeBSD.org> |
Upgrade to OpenSSH 7.7p1.
|
#
4f52dfbb |
|
08-May-2018 |
Dag-Erling Smørgrav <des@FreeBSD.org> |
Upgrade to OpenSSH 7.6p1. This will be followed shortly by 7.7p1. This completely removes client-side support for the SSH 1 protocol, which was already disabled in 12 but is still enabled in 11. For that reason, we will not be able to merge 7.6p1 or newer back to 11.
|
#
ca86bcf2 |
|
05-Mar-2017 |
Dag-Erling Smørgrav <des@FreeBSD.org> |
Upgrade to OpenSSH 7.4p1.
|
#
076ad2f8 |
|
01-Mar-2017 |
Dag-Erling Smørgrav <des@FreeBSD.org> |
Upgrade to OpenSSH 7.3p1.
|
#
acc1a9ef |
|
10-Mar-2016 |
Dag-Erling Smørgrav <des@FreeBSD.org> |
Upgrade to OpenSSH 7.2p2.
|
#
557f75e5 |
|
19-Jan-2016 |
Dag-Erling Smørgrav <des@FreeBSD.org> |
Upgrade to OpenSSH 6.9p1.
|
#
bc5531de |
|
19-Jan-2016 |
Dag-Erling Smørgrav <des@FreeBSD.org> |
Upgrade to OpenSSH 6.8p1.
|
#
b83788ff |
|
25-Mar-2014 |
Dag-Erling Smørgrav <des@FreeBSD.org> |
Upgrade to OpenSSH 6.6p1.
|
#
f7167e0e |
|
31-Jan-2014 |
Dag-Erling Smørgrav <des@FreeBSD.org> |
Upgrade to OpenSSH 6.5p1.
|
#
e4a9863f |
|
21-Sep-2013 |
Dag-Erling Smørgrav <des@FreeBSD.org> |
Upgrade to 6.3p1. Approved by: re (gjb)
|
#
4a421b63 |
|
04-May-2011 |
Dag-Erling Smørgrav <des@FreeBSD.org> |
Upgrade to OpenSSH 5.8p2.
|
#
b15c8340 |
|
09-Mar-2010 |
Dag-Erling Smørgrav <des@FreeBSD.org> |
Upgrade to OpenSSH 5.4p1. MFC after: 1 month
|
#
7aee6ffe |
|
01-Oct-2009 |
Dag-Erling Smørgrav <des@FreeBSD.org> |
Upgrade to OpenSSH 5.3p1.
|
#
cce7d346 |
|
22-May-2009 |
Dag-Erling Smørgrav <des@FreeBSD.org> |
Upgrade to OpenSSH 5.2p1. MFC after: 3 months
|
#
e3ae3b09 |
|
22-Jul-2008 |
Dag-Erling Smørgrav <des@FreeBSD.org> |
Properly flatten openssh/dist. |
#
92eb0aa1 |
|
10-Nov-2006 |
Dag-Erling Smørgrav <des@FreeBSD.org> |
Vendor import of OpenSSH 4.5p1. |
#
761efaa7 |
|
30-Sep-2006 |
Dag-Erling Smørgrav <des@FreeBSD.org> |
Vendor import of OpenSSH 4.4p1. |
#
021d409f |
|
22-Mar-2006 |
Dag-Erling Smørgrav <des@FreeBSD.org> |
Vendor import of OpenSSH 4.3p1. |
#
d0c8c0bc |
|
23-Apr-2003 |
Dag-Erling Smørgrav <des@FreeBSD.org> |
Vendor import of OpenSSH-portable 3.6.1p1. |
#
4d3fc8b0 |
|
16-Mar-2023 |
Ed Maste <emaste@FreeBSD.org> |
ssh: Update to OpenSSH 9.3p1 This release fixes a number of security bugs and has minor new features and bug fixes. Security fixes, from the release notes (https://www.openssh.com/txt/release-9.3): This release contains fixes for a security problem and a memory safety problem. The memory safety problem is not believed to be exploitable, but we report most network-reachable memory faults as security bugs. * ssh-add(1): when adding smartcard keys to ssh-agent(1) with the per-hop destination constraints (ssh-add -h ...) added in OpenSSH 8.9, a logic error prevented the constraints from being communicated to the agent. This resulted in the keys being added without constraints. The common cases of non-smartcard keys and keys without destination constraints are unaffected. This problem was reported by Luci Stanescu. * ssh(1): Portable OpenSSH provides an implementation of the getrrsetbyname(3) function if the standard library does not provide it, for use by the VerifyHostKeyDNS feature. A specifically crafted DNS response could cause this function to perform an out-of-bounds read of adjacent stack data, but this condition does not appear to be exploitable beyond denial-of- service to the ssh(1) client. The getrrsetbyname(3) replacement is only included if the system's standard library lacks this function and portable OpenSSH was not compiled with the ldns library (--with-ldns). getrrsetbyname(3) is only invoked if using VerifyHostKeyDNS to fetch SSHFP records. This problem was found by the Coverity static analyzer. Sponsored by: The FreeBSD Foundation
|
#
1323ec57 |
|
13-Apr-2022 |
Ed Maste <emaste@FreeBSD.org> |
ssh: update to OpenSSH v8.9p1 Release notes are available at https://www.openssh.com/txt/release-8.9 Some highlights: * ssh(1), sshd(8), ssh-add(1), ssh-agent(1): add a system for restricting forwarding and use of keys added to ssh-agent(1) * ssh(1), sshd(8): add the sntrup761x25519-sha512@openssh.com hybrid ECDH/x25519 + Streamlined NTRU Prime post-quantum KEX to the default KEXAlgorithms list (after the ECDH methods but before the prime-group DH ones). The next release of OpenSSH is likely to make this key exchange the default method. * sshd(8), portable OpenSSH only: this release removes in-built support for MD5-hashed passwords. If you require these on your system then we recommend linking against libxcrypt or similar. Future deprecation notice ========================= A near-future release of OpenSSH will switch scp(1) from using the legacy scp/rcp protocol to using SFTP by default. Legacy scp/rcp performs wildcard expansion of remote filenames (e.g. "scp host:* .") through the remote shell. This has the side effect of requiring double quoting of shell meta-characters in file names included on scp(1) command-lines, otherwise they could be interpreted as shell commands on the remote side. MFC after: 1 month Relnotes: Yes Sponsored by: The FreeBSD Foundation
|
#
19261079 |
|
07-Sep-2021 |
Ed Maste <emaste@FreeBSD.org> |
openssh: update to OpenSSH v8.7p1 Some notable changes, from upstream's release notes: - sshd(8): Remove support for obsolete "host/port" syntax. - ssh(1): When prompting whether to record a new host key, accept the key fingerprint as a synonym for "yes". - ssh-keygen(1): when acting as a CA and signing certificates with an RSA key, default to using the rsa-sha2-512 signature algorithm. - ssh(1), sshd(8), ssh-keygen(1): this release removes the "ssh-rsa" (RSA/SHA1) algorithm from those accepted for certificate signatures. - ssh-sk-helper(8): this is a new binary. It is used by the FIDO/U2F support to provide address-space isolation for token middleware libraries (including the internal one). - ssh(1): this release enables UpdateHostkeys by default subject to some conservative preconditions. - scp(1): this release changes the behaviour of remote to remote copies (e.g. "scp host-a:/path host-b:") to transfer through the local host by default. - scp(1): experimental support for transfers using the SFTP protocol as a replacement for the venerable SCP/RCP protocol that it has traditionally used. Additional integration work is needed to support FIDO/U2F in the base system. Deprecation Notice ------------------ OpenSSH will disable the ssh-rsa signature scheme by default in the next release. Reviewed by: imp MFC after: 1 month Relnotes: Yes Sponsored by: The FreeBSD Foundation Differential Revision: https://reviews.freebsd.org/D29985
|
#
2f513db7 |
|
14-Feb-2020 |
Ed Maste <emaste@FreeBSD.org> |
Upgrade to OpenSSH 7.9p1. MFC after: 2 months Sponsored by: The FreeBSD Foundation
|
#
2a01feab |
|
06-Oct-2018 |
Ed Maste <emaste@FreeBSD.org> |
openssh: cherry-pick OpenSSL 1.1.1 compatibility Compatibility with existing OpenSSL versions is maintained. Upstream commits: 482d23bcac upstream: hold our collective noses and use the openssl-1.1.x 48f54b9d12 adapt -portable to OpenSSL 1.1x API 86e0a9f3d2 upstream: use only openssl-1.1.x API here too a3fd8074e2 upstream: missed a bit of openssl-1.0.x API in this unittest cce8cbe0ed Fix openssl-1.1 fallout for --without-openssl. Trivial conflicts in sshkey.c and test_sshkey.c were resolved. Connect libressl-api-compat.c to the build, and regenerate config.h Reviewed by: des Approved by: re (rgrimes) MFC after: 2 seeks Sponsored by: The FreeBSD Foundation Differential Revision: https://reviews.freebsd.org/D17444
|
#
190cef3d |
|
10-Sep-2018 |
Dag-Erling Smørgrav <des@FreeBSD.org> |
Upgrade to OpenSSH 7.8p1. Approved by: re (kib@)
|
#
47dd1d1b |
|
11-May-2018 |
Dag-Erling Smørgrav <des@FreeBSD.org> |
Upgrade to OpenSSH 7.7p1.
|
#
4f52dfbb |
|
08-May-2018 |
Dag-Erling Smørgrav <des@FreeBSD.org> |
Upgrade to OpenSSH 7.6p1. This will be followed shortly by 7.7p1. This completely removes client-side support for the SSH 1 protocol, which was already disabled in 12 but is still enabled in 11. For that reason, we will not be able to merge 7.6p1 or newer back to 11.
|
#
ca86bcf2 |
|
05-Mar-2017 |
Dag-Erling Smørgrav <des@FreeBSD.org> |
Upgrade to OpenSSH 7.4p1.
|
#
076ad2f8 |
|
01-Mar-2017 |
Dag-Erling Smørgrav <des@FreeBSD.org> |
Upgrade to OpenSSH 7.3p1.
|
#
acc1a9ef |
|
10-Mar-2016 |
Dag-Erling Smørgrav <des@FreeBSD.org> |
Upgrade to OpenSSH 7.2p2.
|
#
557f75e5 |
|
19-Jan-2016 |
Dag-Erling Smørgrav <des@FreeBSD.org> |
Upgrade to OpenSSH 6.9p1.
|
#
bc5531de |
|
19-Jan-2016 |
Dag-Erling Smørgrav <des@FreeBSD.org> |
Upgrade to OpenSSH 6.8p1.
|
#
b83788ff |
|
25-Mar-2014 |
Dag-Erling Smørgrav <des@FreeBSD.org> |
Upgrade to OpenSSH 6.6p1.
|
#
f7167e0e |
|
31-Jan-2014 |
Dag-Erling Smørgrav <des@FreeBSD.org> |
Upgrade to OpenSSH 6.5p1.
|
#
e4a9863f |
|
21-Sep-2013 |
Dag-Erling Smørgrav <des@FreeBSD.org> |
Upgrade to 6.3p1. Approved by: re (gjb)
|
#
4a421b63 |
|
04-May-2011 |
Dag-Erling Smørgrav <des@FreeBSD.org> |
Upgrade to OpenSSH 5.8p2.
|
#
b15c8340 |
|
09-Mar-2010 |
Dag-Erling Smørgrav <des@FreeBSD.org> |
Upgrade to OpenSSH 5.4p1. MFC after: 1 month
|
#
7aee6ffe |
|
01-Oct-2009 |
Dag-Erling Smørgrav <des@FreeBSD.org> |
Upgrade to OpenSSH 5.3p1.
|
#
cce7d346 |
|
22-May-2009 |
Dag-Erling Smørgrav <des@FreeBSD.org> |
Upgrade to OpenSSH 5.2p1. MFC after: 3 months
|
#
e3ae3b09 |
|
22-Jul-2008 |
Dag-Erling Smørgrav <des@FreeBSD.org> |
Properly flatten openssh/dist. |
#
92eb0aa1 |
|
10-Nov-2006 |
Dag-Erling Smørgrav <des@FreeBSD.org> |
Vendor import of OpenSSH 4.5p1. |
#
761efaa7 |
|
30-Sep-2006 |
Dag-Erling Smørgrav <des@FreeBSD.org> |
Vendor import of OpenSSH 4.4p1. |
#
021d409f |
|
22-Mar-2006 |
Dag-Erling Smørgrav <des@FreeBSD.org> |
Vendor import of OpenSSH 4.3p1. |
#
d0c8c0bc |
|
23-Apr-2003 |
Dag-Erling Smørgrav <des@FreeBSD.org> |
Vendor import of OpenSSH-portable 3.6.1p1. |
#
1323ec57 |
|
13-Apr-2022 |
Ed Maste <emaste@FreeBSD.org> |
ssh: update to OpenSSH v8.9p1 Release notes are available at https://www.openssh.com/txt/release-8.9 Some highlights: * ssh(1), sshd(8), ssh-add(1), ssh-agent(1): add a system for restricting forwarding and use of keys added to ssh-agent(1) * ssh(1), sshd(8): add the sntrup761x25519-sha512@openssh.com hybrid ECDH/x25519 + Streamlined NTRU Prime post-quantum KEX to the default KEXAlgorithms list (after the ECDH methods but before the prime-group DH ones). The next release of OpenSSH is likely to make this key exchange the default method. * sshd(8), portable OpenSSH only: this release removes in-built support for MD5-hashed passwords. If you require these on your system then we recommend linking against libxcrypt or similar. Future deprecation notice ========================= A near-future release of OpenSSH will switch scp(1) from using the legacy scp/rcp protocol to using SFTP by default. Legacy scp/rcp performs wildcard expansion of remote filenames (e.g. "scp host:* .") through the remote shell. This has the side effect of requiring double quoting of shell meta-characters in file names included on scp(1) command-lines, otherwise they could be interpreted as shell commands on the remote side. MFC after: 1 month Relnotes: Yes Sponsored by: The FreeBSD Foundation
|
#
19261079 |
|
07-Sep-2021 |
Ed Maste <emaste@FreeBSD.org> |
openssh: update to OpenSSH v8.7p1 Some notable changes, from upstream's release notes: - sshd(8): Remove support for obsolete "host/port" syntax. - ssh(1): When prompting whether to record a new host key, accept the key fingerprint as a synonym for "yes". - ssh-keygen(1): when acting as a CA and signing certificates with an RSA key, default to using the rsa-sha2-512 signature algorithm. - ssh(1), sshd(8), ssh-keygen(1): this release removes the "ssh-rsa" (RSA/SHA1) algorithm from those accepted for certificate signatures. - ssh-sk-helper(8): this is a new binary. It is used by the FIDO/U2F support to provide address-space isolation for token middleware libraries (including the internal one). - ssh(1): this release enables UpdateHostkeys by default subject to some conservative preconditions. - scp(1): this release changes the behaviour of remote to remote copies (e.g. "scp host-a:/path host-b:") to transfer through the local host by default. - scp(1): experimental support for transfers using the SFTP protocol as a replacement for the venerable SCP/RCP protocol that it has traditionally used. Additional integration work is needed to support FIDO/U2F in the base system. Deprecation Notice ------------------ OpenSSH will disable the ssh-rsa signature scheme by default in the next release. Reviewed by: imp MFC after: 1 month Relnotes: Yes Sponsored by: The FreeBSD Foundation Differential Revision: https://reviews.freebsd.org/D29985
|
#
2f513db7 |
|
14-Feb-2020 |
Ed Maste <emaste@FreeBSD.org> |
Upgrade to OpenSSH 7.9p1. MFC after: 2 months Sponsored by: The FreeBSD Foundation
|
#
2a01feab |
|
06-Oct-2018 |
Ed Maste <emaste@FreeBSD.org> |
openssh: cherry-pick OpenSSL 1.1.1 compatibility Compatibility with existing OpenSSL versions is maintained. Upstream commits: 482d23bcac upstream: hold our collective noses and use the openssl-1.1.x 48f54b9d12 adapt -portable to OpenSSL 1.1x API 86e0a9f3d2 upstream: use only openssl-1.1.x API here too a3fd8074e2 upstream: missed a bit of openssl-1.0.x API in this unittest cce8cbe0ed Fix openssl-1.1 fallout for --without-openssl. Trivial conflicts in sshkey.c and test_sshkey.c were resolved. Connect libressl-api-compat.c to the build, and regenerate config.h Reviewed by: des Approved by: re (rgrimes) MFC after: 2 seeks Sponsored by: The FreeBSD Foundation Differential Revision: https://reviews.freebsd.org/D17444
|
#
190cef3d |
|
10-Sep-2018 |
Dag-Erling Smørgrav <des@FreeBSD.org> |
Upgrade to OpenSSH 7.8p1. Approved by: re (kib@)
|
#
47dd1d1b |
|
11-May-2018 |
Dag-Erling Smørgrav <des@FreeBSD.org> |
Upgrade to OpenSSH 7.7p1.
|
#
4f52dfbb |
|
08-May-2018 |
Dag-Erling Smørgrav <des@FreeBSD.org> |
Upgrade to OpenSSH 7.6p1. This will be followed shortly by 7.7p1. This completely removes client-side support for the SSH 1 protocol, which was already disabled in 12 but is still enabled in 11. For that reason, we will not be able to merge 7.6p1 or newer back to 11.
|
#
ca86bcf2 |
|
05-Mar-2017 |
Dag-Erling Smørgrav <des@FreeBSD.org> |
Upgrade to OpenSSH 7.4p1.
|
#
076ad2f8 |
|
01-Mar-2017 |
Dag-Erling Smørgrav <des@FreeBSD.org> |
Upgrade to OpenSSH 7.3p1.
|
#
acc1a9ef |
|
10-Mar-2016 |
Dag-Erling Smørgrav <des@FreeBSD.org> |
Upgrade to OpenSSH 7.2p2.
|
#
557f75e5 |
|
19-Jan-2016 |
Dag-Erling Smørgrav <des@FreeBSD.org> |
Upgrade to OpenSSH 6.9p1.
|
#
bc5531de |
|
19-Jan-2016 |
Dag-Erling Smørgrav <des@FreeBSD.org> |
Upgrade to OpenSSH 6.8p1.
|
#
b83788ff |
|
25-Mar-2014 |
Dag-Erling Smørgrav <des@FreeBSD.org> |
Upgrade to OpenSSH 6.6p1.
|
#
f7167e0e |
|
31-Jan-2014 |
Dag-Erling Smørgrav <des@FreeBSD.org> |
Upgrade to OpenSSH 6.5p1.
|
#
e4a9863f |
|
21-Sep-2013 |
Dag-Erling Smørgrav <des@FreeBSD.org> |
Upgrade to 6.3p1. Approved by: re (gjb)
|
#
4a421b63 |
|
04-May-2011 |
Dag-Erling Smørgrav <des@FreeBSD.org> |
Upgrade to OpenSSH 5.8p2.
|
#
b15c8340 |
|
09-Mar-2010 |
Dag-Erling Smørgrav <des@FreeBSD.org> |
Upgrade to OpenSSH 5.4p1. MFC after: 1 month
|
#
7aee6ffe |
|
01-Oct-2009 |
Dag-Erling Smørgrav <des@FreeBSD.org> |
Upgrade to OpenSSH 5.3p1.
|
#
cce7d346 |
|
22-May-2009 |
Dag-Erling Smørgrav <des@FreeBSD.org> |
Upgrade to OpenSSH 5.2p1. MFC after: 3 months
|
#
e3ae3b09 |
|
22-Jul-2008 |
Dag-Erling Smørgrav <des@FreeBSD.org> |
Properly flatten openssh/dist. |
#
92eb0aa1 |
|
10-Nov-2006 |
Dag-Erling Smørgrav <des@FreeBSD.org> |
Vendor import of OpenSSH 4.5p1. |
#
761efaa7 |
|
30-Sep-2006 |
Dag-Erling Smørgrav <des@FreeBSD.org> |
Vendor import of OpenSSH 4.4p1. |
#
021d409f |
|
22-Mar-2006 |
Dag-Erling Smørgrav <des@FreeBSD.org> |
Vendor import of OpenSSH 4.3p1. |
#
d0c8c0bc |
|
23-Apr-2003 |
Dag-Erling Smørgrav <des@FreeBSD.org> |
Vendor import of OpenSSH-portable 3.6.1p1. |
#
19261079 |
|
07-Sep-2021 |
Ed Maste <emaste@FreeBSD.org> |
openssh: update to OpenSSH v8.7p1 Some notable changes, from upstream's release notes: - sshd(8): Remove support for obsolete "host/port" syntax. - ssh(1): When prompting whether to record a new host key, accept the key fingerprint as a synonym for "yes". - ssh-keygen(1): when acting as a CA and signing certificates with an RSA key, default to using the rsa-sha2-512 signature algorithm. - ssh(1), sshd(8), ssh-keygen(1): this release removes the "ssh-rsa" (RSA/SHA1) algorithm from those accepted for certificate signatures. - ssh-sk-helper(8): this is a new binary. It is used by the FIDO/U2F support to provide address-space isolation for token middleware libraries (including the internal one). - ssh(1): this release enables UpdateHostkeys by default subject to some conservative preconditions. - scp(1): this release changes the behaviour of remote to remote copies (e.g. "scp host-a:/path host-b:") to transfer through the local host by default. - scp(1): experimental support for transfers using the SFTP protocol as a replacement for the venerable SCP/RCP protocol that it has traditionally used. Additional integration work is needed to support FIDO/U2F in the base system. Deprecation Notice ------------------ OpenSSH will disable the ssh-rsa signature scheme by default in the next release. Reviewed by: imp MFC after: 1 month Relnotes: Yes Sponsored by: The FreeBSD Foundation Differential Revision: https://reviews.freebsd.org/D29985
|
#
2f513db7 |
|
14-Feb-2020 |
Ed Maste <emaste@FreeBSD.org> |
Upgrade to OpenSSH 7.9p1. MFC after: 2 months Sponsored by: The FreeBSD Foundation
|
#
2a01feab |
|
06-Oct-2018 |
Ed Maste <emaste@FreeBSD.org> |
openssh: cherry-pick OpenSSL 1.1.1 compatibility Compatibility with existing OpenSSL versions is maintained. Upstream commits: 482d23bcac upstream: hold our collective noses and use the openssl-1.1.x 48f54b9d12 adapt -portable to OpenSSL 1.1x API 86e0a9f3d2 upstream: use only openssl-1.1.x API here too a3fd8074e2 upstream: missed a bit of openssl-1.0.x API in this unittest cce8cbe0ed Fix openssl-1.1 fallout for --without-openssl. Trivial conflicts in sshkey.c and test_sshkey.c were resolved. Connect libressl-api-compat.c to the build, and regenerate config.h Reviewed by: des Approved by: re (rgrimes) MFC after: 2 seeks Sponsored by: The FreeBSD Foundation Differential Revision: https://reviews.freebsd.org/D17444
|
#
190cef3d |
|
10-Sep-2018 |
Dag-Erling Smørgrav <des@FreeBSD.org> |
Upgrade to OpenSSH 7.8p1. Approved by: re (kib@)
|
#
47dd1d1b |
|
11-May-2018 |
Dag-Erling Smørgrav <des@FreeBSD.org> |
Upgrade to OpenSSH 7.7p1.
|
#
4f52dfbb |
|
08-May-2018 |
Dag-Erling Smørgrav <des@FreeBSD.org> |
Upgrade to OpenSSH 7.6p1. This will be followed shortly by 7.7p1. This completely removes client-side support for the SSH 1 protocol, which was already disabled in 12 but is still enabled in 11. For that reason, we will not be able to merge 7.6p1 or newer back to 11.
|
#
ca86bcf2 |
|
05-Mar-2017 |
Dag-Erling Smørgrav <des@FreeBSD.org> |
Upgrade to OpenSSH 7.4p1.
|
#
076ad2f8 |
|
01-Mar-2017 |
Dag-Erling Smørgrav <des@FreeBSD.org> |
Upgrade to OpenSSH 7.3p1.
|
#
acc1a9ef |
|
10-Mar-2016 |
Dag-Erling Smørgrav <des@FreeBSD.org> |
Upgrade to OpenSSH 7.2p2.
|
#
557f75e5 |
|
19-Jan-2016 |
Dag-Erling Smørgrav <des@FreeBSD.org> |
Upgrade to OpenSSH 6.9p1.
|
#
bc5531de |
|
19-Jan-2016 |
Dag-Erling Smørgrav <des@FreeBSD.org> |
Upgrade to OpenSSH 6.8p1.
|
#
b83788ff |
|
25-Mar-2014 |
Dag-Erling Smørgrav <des@FreeBSD.org> |
Upgrade to OpenSSH 6.6p1.
|
#
f7167e0e |
|
31-Jan-2014 |
Dag-Erling Smørgrav <des@FreeBSD.org> |
Upgrade to OpenSSH 6.5p1.
|
#
e4a9863f |
|
21-Sep-2013 |
Dag-Erling Smørgrav <des@FreeBSD.org> |
Upgrade to 6.3p1. Approved by: re (gjb)
|
#
4a421b63 |
|
04-May-2011 |
Dag-Erling Smørgrav <des@FreeBSD.org> |
Upgrade to OpenSSH 5.8p2.
|
#
b15c8340 |
|
09-Mar-2010 |
Dag-Erling Smørgrav <des@FreeBSD.org> |
Upgrade to OpenSSH 5.4p1. MFC after: 1 month
|
#
7aee6ffe |
|
01-Oct-2009 |
Dag-Erling Smørgrav <des@FreeBSD.org> |
Upgrade to OpenSSH 5.3p1.
|
#
cce7d346 |
|
22-May-2009 |
Dag-Erling Smørgrav <des@FreeBSD.org> |
Upgrade to OpenSSH 5.2p1. MFC after: 3 months
|
#
e3ae3b09 |
|
22-Jul-2008 |
Dag-Erling Smørgrav <des@FreeBSD.org> |
Properly flatten openssh/dist. |
#
92eb0aa1 |
|
10-Nov-2006 |
Dag-Erling Smørgrav <des@FreeBSD.org> |
Vendor import of OpenSSH 4.5p1. |
#
761efaa7 |
|
30-Sep-2006 |
Dag-Erling Smørgrav <des@FreeBSD.org> |
Vendor import of OpenSSH 4.4p1. |
#
021d409f |
|
22-Mar-2006 |
Dag-Erling Smørgrav <des@FreeBSD.org> |
Vendor import of OpenSSH 4.3p1. |
#
d0c8c0bc |
|
23-Apr-2003 |
Dag-Erling Smørgrav <des@FreeBSD.org> |
Vendor import of OpenSSH-portable 3.6.1p1. |
#
3e058dbd |
|
19-Sep-2018 |
Ed Maste <emaste@FreeBSD.org> |
openssh: cherry-pick OpenSSL 1.1.1 compatibility Upstream commits: 482d23bcac upstream: hold our collective noses and use the openssl-1.1.x 48f54b9d12 adapt -portable to OpenSSL 1.1x API 86e0a9f3d2 upstream: use only openssl-1.1.x API here too a3fd8074e2 upstream: missed a bit of openssl-1.0.x API in this unittest cce8cbe0ed Fix openssl-1.1 fallout for --without-openssl. Trivial conflicts in sshkey.c and test_sshkey.c were resolved. Sponsored by: The FreeBSD Foundation
|
#
a7d5f7eb |
|
19-Oct-2010 |
Jamie Gritton <jamie@FreeBSD.org> |
A new jail(8) with a configuration file, to replace the work currently done by /etc/rc.d/jail.
|
#
124981e1 |
|
21-Apr-2010 |
Dag-Erling Smørgrav <des@FreeBSD.org> |
MFH OpenSSH 5.4p1
|
#
fe0506d7 |
|
09-Mar-2010 |
Marcel Moolenaar <marcel@FreeBSD.org> |
Create the altix project branch. The altix project will add support for the SGI Altix 350 to FreeBSD/ia64. The hardware used for porting is a two-module system, consisting of a base compute module and a CPU expansion module. SGI's NUMAFlex architecture can be an excellent platform to test CPU affinity and NUMA-aware features in FreeBSD.
|
#
d7f03759 |
|
19-Oct-2008 |
Ulf Lilleengen <lulf@FreeBSD.org> |
- Import the HEAD csup code which is the basis for the cvsmode work.
|
#
92eb0aa1 |
|
10-Nov-2006 |
Dag-Erling Smørgrav <des@FreeBSD.org> |
Vendor import of OpenSSH 4.5p1.
|
#
761efaa7 |
|
30-Sep-2006 |
Dag-Erling Smørgrav <des@FreeBSD.org> |
Vendor import of OpenSSH 4.4p1.
|
#
021d409f |
|
22-Mar-2006 |
Dag-Erling Smørgrav <des@FreeBSD.org> |
Vendor import of OpenSSH 4.3p1.
|
#
d0c8c0bc |
|
23-Apr-2003 |
Dag-Erling Smørgrav <des@FreeBSD.org> |
Vendor import of OpenSSH-portable 3.6.1p1.
|