#
295124 |
|
01-Feb-2016 |
grehan |
MFC r284539, r284630, r284688, r284877, r285217, r285218, r286837, r286838, r288470, r288522, r288524, r288826, r289001
Pull in bhyve bug fixes and changes to allow UEFI booting. This provides Windows support.
Tested on Intel and AMD with: - Arch Linux i386+amd64 (kernel 4.3.3) - Ubuntu 15.10 server 64-bit - FreeBSD-CURRENT/amd64 20160127 snap - FreeBSD 10.2 i386+amd64 - OpenBSD 5.8 i386+amd64 - SmartOS latest - Windows 10 build 1511'
Huge thanks to Yamagi Burmeister who submitted the patch and did the majority of the testing.
r284539 - bootrom mem allocation support r284630 - Add SO_REUSEADDR when starting debug port r284688 - Fix a regression in "movs" emulation r284877 - verify_gla() non-zero segment base fix r285217 - Always assert DCD and DSR in the uart r285218 - devmem nodes moved to /dev/vmm.io/ r286837 - Add define for SATA Check-Power-Mode r286838 - Add simple (no-op) SATA cmd emulations r288470 - Increase virtio-blk indirect descs r288522 - Firmware guest query interface r288524 - Fix post-test typo r288826 - Clean up SATA unimplemented cmd msg r289001 - Add -l option to specify userboot path
Submitted by: Yamagi Burmeister Approved by: re (kib)
|
#
284894 |
|
27-Jun-2015 |
neel |
MFC r276428: Replace bhyve's minimal RTC emulation with a fully featured one in vmm.ko.
MFC r276432: Initialize all fields of 'struct vm_exception exception' before passing it to vm_inject_exception().
MFC r276763: Clear blocking due to STI or MOV SS in the hypervisor when an instruction is emulated or when the vcpu incurs an exception.
MFC r277149: Clean up usage of 'struct vm_exception' to only to communicate information from userspace to vmm.ko when injecting an exception.
MFC r277168: Fix typo (missing comma).
MFC r277309: Make the error message explicit instead of just printing the usage if the virtual machine name is not specified.
MFC r277310: Simplify instruction restart logic in bhyve.
MFC r277359: Fix a bug in libvmmapi 'vm_copy_setup()' where it would return success even if the 'gpa' was in the guest MMIO region.
MFC r277360: MOVS instruction emulation.
MFC r277626: Add macro to identify AVIC capability (advanced virtual interrupt controller) in AMD processors.
MFC r279220: Don't close a block context if it couldn't be opened avoiding a null deref.
MFC r279225: Add "-u" option to bhyve(8) to indicate that the RTC should maintain UTC time.
MFC r279227: Emulate MSR 0xC0011024 when running on AMD processors.
MFC r279228: Always emulate MSR_PAT on Intel processors and don't rely on PAT save/restore capability of VT-x. This lets bhyve run nested in older VMware versions that don't support the PAT save/restore capability.
MFC r279540: Fix warnings/errors when building vmm.ko with gcc.
|
#
270159 |
|
18-Aug-2014 |
grehan |
MFC r267921, r267934, r267949, r267959, r267966, r268202, r268276, r268427, r268428, r268521, r268638, r268639, r268701, r268777, r268889, r268922, r269008, r269042, r269043, r269080, r269094, r269108, r269109, r269281, r269317, r269700, r269896, r269962, r269989.
Catch bhyve up to CURRENT.
Lightly tested with FreeBSD i386/amd64, Linux i386/amd64, and OpenBSD/amd64. Still resolving an issue with OpenBSD/i386.
Many thanks to jhb@ for all the hard work on the prior MFCs !
r267921 - support the "mov r/m8, imm8" instruction r267934 - document options r267949 - set DMI vers/date to fixed values r267959 - doc: sort cmd flags r267966 - EPT misconf post-mortem info r268202 - use correct flag for event index r268276 - 64-bit virtio capability api r268427 - invalidate guest TLB when cr3 is updated, needed for TSS r268428 - identify vcpu's operating mode r268521 - use correct offset in guest logical-to-linear translation r268638 - chs value r268639 - chs fake values r268701 - instr emul operand/address size override prefix support r268777 - emulation for legacy x86 task switching r268889 - nested exception support r268922 - fix INVARIANTS build r269008 - emulate instructions found in the OpenBSD/i386 5.5 kernel r269042 - fix fault injection r269043 - Reduce VMEXIT_RESTARTs in task_switch.c r269080 - fix issues in PUSH emulation r269094 - simplify return values from the inout handlers r269108 - don't return -1 from the push emulation handler r269109 - avoid permanent sleep in vm_handle_hlt() r269281 - list VT-x features in base kernel dmesg r269317 - Mark AHCI fatal errors as not completed r269700 - Support PCI extended config space in bhyve r269896 - Minor cleanup r269962 - use max guest memory when creating IOMMU domain r269989 - fix interrupt mode names
|
#
270071 |
|
16-Aug-2014 |
grehan |
MFC r267216 Add ioctl(VM_REINIT) to reinitialize the virtual machine state maintained by vmm.ko. This allows the virtual machine to be restarted without having to destroy it first.
|
#
270070 |
|
16-Aug-2014 |
grehan |
MFC r266933 Activate vcpus from bhyve(8) using the ioctl VM_ACTIVATE_CPU instead of doing it implicitly in vmm.ko.
|
#
268976 |
|
22-Jul-2014 |
jhb |
MFC 266424,266476,266524,266573,266595,266626,266627,266633,266641,266642, 266708,266724,266934,266935,268521: Emulation of the "ins" and "outs" instructions.
Various fixes for translating guest linear addresses to guest physical addresses.
|
#
268972 |
|
22-Jul-2014 |
jhb |
MFC 266125: Implement a PCI interrupt router to route PCI legacy INTx interrupts to the legacy 8259A PICs.
|
#
268935 |
|
21-Jul-2014 |
jhb |
MFC 263780,264516,265062,265101,265203,265364: Add an ioctl to suspend a virtual machine (VM_SUSPEND).
Add logic in the HLT exit handler to detect if the guest has put all vcpus to sleep permanently by executing a HLT with interrupts disabled.
When this condition is detected the guest with be suspended with a reason of VM_SUSPEND_HALT and the bhyve(8) process will exit.
This logic can be disabled via the tunable 'hw.vmm.halt_detection'.
|
#
268891 |
|
19-Jul-2014 |
jhb |
MFC 259942,262274,263035,263054,263211,263744,264179,264324,264468,264631, 264648,264650,264651,266572,267558: Flesh out the AT PIC and 8254 PIT emulations and move them into the kernel.
|
#
267427 |
|
12-Jun-2014 |
jhb |
MFC 261638,262144,262506,266765: Add virtualized XSAVE support to bhyve which permits guests to use XSAVE and XSAVE-enabled features like AVX. - Store a per-cpu guest xcr0 register and handle xsetbv VM exits by emulating the instruction. - Only expose XSAVE to guests if XSAVE is enabled in the host. Only expose a subset of XSAVE features currently supported by the guest and for which the proper emulation of xsetbv is known. Currently this includes X87, SSE, AVX, AVX-512, and Intel MPX. - Add support for injecting hardware exceptions into the guest and use this to trigger exceptions in the guest for invalid xsetbv operations instead of potentially faulting in the host. - Queue pending exceptions in the 'struct vcpu' instead of directly updating the processor-specific VMCS or VMCB. The pending exception will be delivered right before entering the guest. - Rename the unused ioctl VM_INJECT_EVENT to VM_INJECT_EXCEPTION and restrict it to only deliver x86 hardware exceptions. This new ioctl is now used to inject a protection fault when the guest accesses an unimplemented MSR. - Expose a subset of known-safe features from leaf 0 of the structured extended features to guests if they are supported on the host including RDFSBASE/RDGSBASE, BMI1/2, AVX2, AVX-512, HLE, ERMS, and RTM. Aside from AVX-512, these features are all new instructions available for use in ring 3 with no additional hypervisor changes needed.
|
#
267393 |
|
12-Jun-2014 |
jhb |
MFC 260239,261268,265058: Expand the support for PCI INTx interrupts including providing interrupt routing information for INTx interrupts to I/O APIC pins and enabling INTx interrupts in the virtio and AHCI backends.
|
#
262350 |
|
22-Feb-2014 |
jhb |
MFC 258859,259081,259085,259205,259213,259275,259482,259537,259702,259779: Several changes to the local APIC support in bhyve: - Rename 'vm_interrupt_hostcpu()' to 'vcpu_notify_event()'. - If a vcpu disables its local apic and then executes a 'HLT' then spin down the vcpu and destroy its thread context. Also modify the 'HLT' processing to ignore pending interrupts in the IRR if interrupts have been disabled by the guest. The interrupt cannot be injected into the guest in any case so resuming it is futile. - Use callout(9) to drive the vlapic timer instead of clocking it on each VM exit. - When the guest is bringing up the APs in the x2APIC mode a write to the ICR register will now trigger a return to userspace with an exitcode of VM_EXITCODE_SPINUP_AP. - Change the vlapic timer lock to be a spinlock because the vlapic can be accessed from within a critical section (vm run loop) when guest is using x2apic mode. - Fix the vlapic version register. - Add a command to bhyvectl to inject an NMI on a specific vcpu. - Add an API to deliver message signalled interrupts to vcpus. This allows callers to treat the MSI 'addr' and 'data' fields as opaque and also lets bhyve implement multiple destination modes: physical, flat and clustered. - Rename the ambiguously named 'vm_setup_msi()' and 'vm_setup_msix()' to 'vm_setup_pptdev_msi()' and 'vm_setup_pptdev_msix()' respectively. - Consolidate the virtual apic initialization in a single function: vlapic_reset() - Add a generic routine to trigger an LVT interrupt that supports both fixed and NMI delivery modes. - Add an ioctl and bhyvectl command to trigger local interrupts inside a guest. In particular, a global NMI similar to that raised by SERR# or PERR# can be simulated by asserting LINT1 on all vCPUs. - Extend the LVT table in the vCPU local APIC to support CMCI. - Flesh out the local APIC error reporting a bit to cache errors and report them via ESR when ESR is written to. Add support for asserting the error LVT when an error occurs. Raise illegal vector errors when attempting to signal an invalid vector for an interrupt or when sending an IPI. - Export table entries in the MADT and MP Table advertising the stock x86 config of LINT0 set to ExtInt and LINT1 wired to NMI.
|
#
261088 |
|
23-Jan-2014 |
jhb |
MFC 257422,257661,258075,258476,258494,258579,258609,258699: Several enhancements to the I/O APIC support in bhyve including: - Move the I/O APIC device model from userspace into vmm.ko and add ioctls to assert and deassert I/O APIC pins. - Add HPET device emulation including a single timer block with 8 timers. - Remove the 'vdev' abstraction.
Approved by: neel
|
#
259073 |
|
07-Dec-2013 |
peter |
Hoist all the mergeinfo up to the root in preparation for enforcing merges to the root only. All MFC's were rerecorded to the root.
Going forward, if an MFC includes mergeinfo, it will need to be made to the root and committed from the root. Merges with --ignore-ancestry or diff | patch can go anywhere.
The mergeinfo in HEAD is in a bad state from years of neglect and manual tampering and this was branched into 10.x. This confuses the coalescing code and prevents it from doing its job.
Approved by: re (gjb, implicit)
|
#
284894 |
|
27-Jun-2015 |
neel |
MFC r276428: Replace bhyve's minimal RTC emulation with a fully featured one in vmm.ko.
MFC r276432: Initialize all fields of 'struct vm_exception exception' before passing it to vm_inject_exception().
MFC r276763: Clear blocking due to STI or MOV SS in the hypervisor when an instruction is emulated or when the vcpu incurs an exception.
MFC r277149: Clean up usage of 'struct vm_exception' to only to communicate information from userspace to vmm.ko when injecting an exception.
MFC r277168: Fix typo (missing comma).
MFC r277309: Make the error message explicit instead of just printing the usage if the virtual machine name is not specified.
MFC r277310: Simplify instruction restart logic in bhyve.
MFC r277359: Fix a bug in libvmmapi 'vm_copy_setup()' where it would return success even if the 'gpa' was in the guest MMIO region.
MFC r277360: MOVS instruction emulation.
MFC r277626: Add macro to identify AVIC capability (advanced virtual interrupt controller) in AMD processors.
MFC r279220: Don't close a block context if it couldn't be opened avoiding a null deref.
MFC r279225: Add "-u" option to bhyve(8) to indicate that the RTC should maintain UTC time.
MFC r279227: Emulate MSR 0xC0011024 when running on AMD processors.
MFC r279228: Always emulate MSR_PAT on Intel processors and don't rely on PAT save/restore capability of VT-x. This lets bhyve run nested in older VMware versions that don't support the PAT save/restore capability.
MFC r279540: Fix warnings/errors when building vmm.ko with gcc.
|
#
270159 |
|
18-Aug-2014 |
grehan |
MFC r267921, r267934, r267949, r267959, r267966, r268202, r268276, r268427, r268428, r268521, r268638, r268639, r268701, r268777, r268889, r268922, r269008, r269042, r269043, r269080, r269094, r269108, r269109, r269281, r269317, r269700, r269896, r269962, r269989.
Catch bhyve up to CURRENT.
Lightly tested with FreeBSD i386/amd64, Linux i386/amd64, and OpenBSD/amd64. Still resolving an issue with OpenBSD/i386.
Many thanks to jhb@ for all the hard work on the prior MFCs !
r267921 - support the "mov r/m8, imm8" instruction r267934 - document options r267949 - set DMI vers/date to fixed values r267959 - doc: sort cmd flags r267966 - EPT misconf post-mortem info r268202 - use correct flag for event index r268276 - 64-bit virtio capability api r268427 - invalidate guest TLB when cr3 is updated, needed for TSS r268428 - identify vcpu's operating mode r268521 - use correct offset in guest logical-to-linear translation r268638 - chs value r268639 - chs fake values r268701 - instr emul operand/address size override prefix support r268777 - emulation for legacy x86 task switching r268889 - nested exception support r268922 - fix INVARIANTS build r269008 - emulate instructions found in the OpenBSD/i386 5.5 kernel r269042 - fix fault injection r269043 - Reduce VMEXIT_RESTARTs in task_switch.c r269080 - fix issues in PUSH emulation r269094 - simplify return values from the inout handlers r269108 - don't return -1 from the push emulation handler r269109 - avoid permanent sleep in vm_handle_hlt() r269281 - list VT-x features in base kernel dmesg r269317 - Mark AHCI fatal errors as not completed r269700 - Support PCI extended config space in bhyve r269896 - Minor cleanup r269962 - use max guest memory when creating IOMMU domain r269989 - fix interrupt mode names
|
#
270071 |
|
16-Aug-2014 |
grehan |
MFC r267216 Add ioctl(VM_REINIT) to reinitialize the virtual machine state maintained by vmm.ko. This allows the virtual machine to be restarted without having to destroy it first.
|
#
270070 |
|
16-Aug-2014 |
grehan |
MFC r266933 Activate vcpus from bhyve(8) using the ioctl VM_ACTIVATE_CPU instead of doing it implicitly in vmm.ko.
|
#
268976 |
|
22-Jul-2014 |
jhb |
MFC 266424,266476,266524,266573,266595,266626,266627,266633,266641,266642, 266708,266724,266934,266935,268521: Emulation of the "ins" and "outs" instructions.
Various fixes for translating guest linear addresses to guest physical addresses.
|
#
268972 |
|
22-Jul-2014 |
jhb |
MFC 266125: Implement a PCI interrupt router to route PCI legacy INTx interrupts to the legacy 8259A PICs.
|
#
268935 |
|
21-Jul-2014 |
jhb |
MFC 263780,264516,265062,265101,265203,265364: Add an ioctl to suspend a virtual machine (VM_SUSPEND).
Add logic in the HLT exit handler to detect if the guest has put all vcpus to sleep permanently by executing a HLT with interrupts disabled.
When this condition is detected the guest with be suspended with a reason of VM_SUSPEND_HALT and the bhyve(8) process will exit.
This logic can be disabled via the tunable 'hw.vmm.halt_detection'.
|
#
268891 |
|
19-Jul-2014 |
jhb |
MFC 259942,262274,263035,263054,263211,263744,264179,264324,264468,264631, 264648,264650,264651,266572,267558: Flesh out the AT PIC and 8254 PIT emulations and move them into the kernel.
|
#
267427 |
|
12-Jun-2014 |
jhb |
MFC 261638,262144,262506,266765: Add virtualized XSAVE support to bhyve which permits guests to use XSAVE and XSAVE-enabled features like AVX. - Store a per-cpu guest xcr0 register and handle xsetbv VM exits by emulating the instruction. - Only expose XSAVE to guests if XSAVE is enabled in the host. Only expose a subset of XSAVE features currently supported by the guest and for which the proper emulation of xsetbv is known. Currently this includes X87, SSE, AVX, AVX-512, and Intel MPX. - Add support for injecting hardware exceptions into the guest and use this to trigger exceptions in the guest for invalid xsetbv operations instead of potentially faulting in the host. - Queue pending exceptions in the 'struct vcpu' instead of directly updating the processor-specific VMCS or VMCB. The pending exception will be delivered right before entering the guest. - Rename the unused ioctl VM_INJECT_EVENT to VM_INJECT_EXCEPTION and restrict it to only deliver x86 hardware exceptions. This new ioctl is now used to inject a protection fault when the guest accesses an unimplemented MSR. - Expose a subset of known-safe features from leaf 0 of the structured extended features to guests if they are supported on the host including RDFSBASE/RDGSBASE, BMI1/2, AVX2, AVX-512, HLE, ERMS, and RTM. Aside from AVX-512, these features are all new instructions available for use in ring 3 with no additional hypervisor changes needed.
|
#
267393 |
|
12-Jun-2014 |
jhb |
MFC 260239,261268,265058: Expand the support for PCI INTx interrupts including providing interrupt routing information for INTx interrupts to I/O APIC pins and enabling INTx interrupts in the virtio and AHCI backends.
|
#
262350 |
|
22-Feb-2014 |
jhb |
MFC 258859,259081,259085,259205,259213,259275,259482,259537,259702,259779: Several changes to the local APIC support in bhyve: - Rename 'vm_interrupt_hostcpu()' to 'vcpu_notify_event()'. - If a vcpu disables its local apic and then executes a 'HLT' then spin down the vcpu and destroy its thread context. Also modify the 'HLT' processing to ignore pending interrupts in the IRR if interrupts have been disabled by the guest. The interrupt cannot be injected into the guest in any case so resuming it is futile. - Use callout(9) to drive the vlapic timer instead of clocking it on each VM exit. - When the guest is bringing up the APs in the x2APIC mode a write to the ICR register will now trigger a return to userspace with an exitcode of VM_EXITCODE_SPINUP_AP. - Change the vlapic timer lock to be a spinlock because the vlapic can be accessed from within a critical section (vm run loop) when guest is using x2apic mode. - Fix the vlapic version register. - Add a command to bhyvectl to inject an NMI on a specific vcpu. - Add an API to deliver message signalled interrupts to vcpus. This allows callers to treat the MSI 'addr' and 'data' fields as opaque and also lets bhyve implement multiple destination modes: physical, flat and clustered. - Rename the ambiguously named 'vm_setup_msi()' and 'vm_setup_msix()' to 'vm_setup_pptdev_msi()' and 'vm_setup_pptdev_msix()' respectively. - Consolidate the virtual apic initialization in a single function: vlapic_reset() - Add a generic routine to trigger an LVT interrupt that supports both fixed and NMI delivery modes. - Add an ioctl and bhyvectl command to trigger local interrupts inside a guest. In particular, a global NMI similar to that raised by SERR# or PERR# can be simulated by asserting LINT1 on all vCPUs. - Extend the LVT table in the vCPU local APIC to support CMCI. - Flesh out the local APIC error reporting a bit to cache errors and report them via ESR when ESR is written to. Add support for asserting the error LVT when an error occurs. Raise illegal vector errors when attempting to signal an invalid vector for an interrupt or when sending an IPI. - Export table entries in the MADT and MP Table advertising the stock x86 config of LINT0 set to ExtInt and LINT1 wired to NMI.
|
#
261088 |
|
23-Jan-2014 |
jhb |
MFC 257422,257661,258075,258476,258494,258579,258609,258699: Several enhancements to the I/O APIC support in bhyve including: - Move the I/O APIC device model from userspace into vmm.ko and add ioctls to assert and deassert I/O APIC pins. - Add HPET device emulation including a single timer block with 8 timers. - Remove the 'vdev' abstraction.
Approved by: neel
|
#
259073 |
|
07-Dec-2013 |
peter |
Hoist all the mergeinfo up to the root in preparation for enforcing merges to the root only. All MFC's were rerecorded to the root.
Going forward, if an MFC includes mergeinfo, it will need to be made to the root and committed from the root. Merges with --ignore-ancestry or diff | patch can go anywhere.
The mergeinfo in HEAD is in a bad state from years of neglect and manual tampering and this was branched into 10.x. This confuses the coalescing code and prevents it from doing its job.
Approved by: re (gjb, implicit)
|