1/*-
2 * SPDX-License-Identifier: BSD-2-Clause
3 *
4 * Copyright (c) 2002-2009 Luigi Rizzo, Universita` di Pisa
5 *
6 * Redistribution and use in source and binary forms, with or without
7 * modification, are permitted provided that the following conditions
8 * are met:
9 * 1. Redistributions of source code must retain the above copyright
10 *    notice, this list of conditions and the following disclaimer.
11 * 2. Redistributions in binary form must reproduce the above copyright
12 *    notice, this list of conditions and the following disclaimer in the
13 *    documentation and/or other materials provided with the distribution.
14 *
15 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
16 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
17 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
18 * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
19 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
20 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
21 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
22 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
23 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
24 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
25 * SUCH DAMAGE.
26 */
27
28#ifndef _IPFW2_H
29#define _IPFW2_H
30
31/*
32 * The default rule number.  By the design of ip_fw, the default rule
33 * is the last one, so its number can also serve as the highest number
34 * allowed for a rule.  The ip_fw code relies on both meanings of this
35 * constant.
36 */
37#define	IPFW_DEFAULT_RULE	65535
38
39#define	RESVD_SET		31	/*set for default and persistent rules*/
40#define	IPFW_MAX_SETS		32	/* Number of sets supported by ipfw*/
41
42/*
43 * Compat values for old clients
44 */
45#ifndef	_KERNEL
46#define	IPFW_TABLES_MAX		65535
47#define	IPFW_TABLES_DEFAULT	128
48#endif
49
50/*
51 * Most commands (queue, pipe, tag, untag, limit...) can have a 16-bit
52 * argument between 1 and 65534. The value 0 (IP_FW_TARG) is used
53 * to represent 'tablearg' value, e.g.  indicate the use of a 'tablearg'
54 * result of the most recent table() lookup.
55 * Note that 16bit is only a historical limit, resulting from
56 * the use of a 16-bit fields for that value. In reality, we can have
57 * 2^32 pipes, queues, tag values and so on.
58 */
59#define	IPFW_ARG_MIN		1
60#define	IPFW_ARG_MAX		65534
61#define IP_FW_TABLEARG		65535	/* Compat value for old clients */
62#define	IP_FW_TARG		0	/* Current tablearg value */
63#define	IP_FW_NAT44_GLOBAL	65535	/* arg1 value for "nat global" */
64
65/*
66 * Number of entries in the call stack of the call/return commands.
67 * Call stack currently is an uint16_t array with rule numbers.
68 */
69#define	IPFW_CALLSTACK_SIZE	16
70
71/* IP_FW3 header/opcodes */
72typedef struct _ip_fw3_opheader {
73	uint16_t opcode;	/* Operation opcode */
74	uint16_t version;	/* Opcode version */
75	uint16_t reserved[2];	/* Align to 64-bit boundary */
76} ip_fw3_opheader;
77
78/* IP_FW3 opcodes */
79#define	IP_FW_TABLE_XADD	86	/* add entry */
80#define	IP_FW_TABLE_XDEL	87	/* delete entry */
81#define	IP_FW_TABLE_XGETSIZE	88	/* get table size (deprecated) */
82#define	IP_FW_TABLE_XLIST	89	/* list table contents */
83#define	IP_FW_TABLE_XDESTROY	90	/* destroy table */
84#define	IP_FW_TABLES_XLIST	92	/* list all tables  */
85#define	IP_FW_TABLE_XINFO	93	/* request info for one table */
86#define	IP_FW_TABLE_XFLUSH	94	/* flush table data */
87#define	IP_FW_TABLE_XCREATE	95	/* create new table  */
88#define	IP_FW_TABLE_XMODIFY	96	/* modify existing table */
89#define	IP_FW_XGET		97	/* Retrieve configuration */
90#define	IP_FW_XADD		98	/* add rule */
91#define	IP_FW_XDEL		99	/* del rule */
92#define	IP_FW_XMOVE		100	/* move rules to different set  */
93#define	IP_FW_XZERO		101	/* clear accounting */
94#define	IP_FW_XRESETLOG		102	/* zero rules logs */
95#define	IP_FW_SET_SWAP		103	/* Swap between 2 sets */
96#define	IP_FW_SET_MOVE		104	/* Move one set to another one */
97#define	IP_FW_SET_ENABLE	105	/* Enable/disable sets */
98#define	IP_FW_TABLE_XFIND	106	/* finds an entry */
99#define	IP_FW_XIFLIST		107	/* list tracked interfaces */
100#define	IP_FW_TABLES_ALIST	108	/* list table algorithms */
101#define	IP_FW_TABLE_XSWAP	109	/* swap two tables */
102#define	IP_FW_TABLE_VLIST	110	/* dump table value hash */
103
104#define	IP_FW_NAT44_XCONFIG	111	/* Create/modify NAT44 instance */
105#define	IP_FW_NAT44_DESTROY	112	/* Destroys NAT44 instance */
106#define	IP_FW_NAT44_XGETCONFIG	113	/* Get NAT44 instance config */
107#define	IP_FW_NAT44_LIST_NAT	114	/* List all NAT44 instances */
108#define	IP_FW_NAT44_XGETLOG	115	/* Get log from NAT44 instance */
109
110#define	IP_FW_DUMP_SOPTCODES	116	/* Dump available sopts/versions */
111#define	IP_FW_DUMP_SRVOBJECTS	117	/* Dump existing named objects */
112
113#define	IP_FW_NAT64STL_CREATE	130	/* Create stateless NAT64 instance */
114#define	IP_FW_NAT64STL_DESTROY	131	/* Destroy stateless NAT64 instance */
115#define	IP_FW_NAT64STL_CONFIG	132	/* Modify stateless NAT64 instance */
116#define	IP_FW_NAT64STL_LIST	133	/* List stateless NAT64 instances */
117#define	IP_FW_NAT64STL_STATS	134	/* Get NAT64STL instance statistics */
118#define	IP_FW_NAT64STL_RESET_STATS 135	/* Reset NAT64STL instance statistics */
119
120#define	IP_FW_NAT64LSN_CREATE	140	/* Create stateful NAT64 instance */
121#define	IP_FW_NAT64LSN_DESTROY	141	/* Destroy stateful NAT64 instance */
122#define	IP_FW_NAT64LSN_CONFIG	142	/* Modify stateful NAT64 instance */
123#define	IP_FW_NAT64LSN_LIST	143	/* List stateful NAT64 instances */
124#define	IP_FW_NAT64LSN_STATS	144	/* Get NAT64LSN instance statistics */
125#define	IP_FW_NAT64LSN_LIST_STATES 145	/* Get stateful NAT64 states */
126#define	IP_FW_NAT64LSN_RESET_STATS 146	/* Reset NAT64LSN instance statistics */
127
128#define	IP_FW_NPTV6_CREATE	150	/* Create NPTv6 instance */
129#define	IP_FW_NPTV6_DESTROY	151	/* Destroy NPTv6 instance */
130#define	IP_FW_NPTV6_CONFIG	152	/* Modify NPTv6 instance */
131#define	IP_FW_NPTV6_LIST	153	/* List NPTv6 instances */
132#define	IP_FW_NPTV6_STATS	154	/* Get NPTv6 instance statistics */
133#define	IP_FW_NPTV6_RESET_STATS	155	/* Reset NPTv6 instance statistics */
134
135#define	IP_FW_NAT64CLAT_CREATE	160	/* Create clat NAT64 instance */
136#define	IP_FW_NAT64CLAT_DESTROY	161	/* Destroy clat NAT64 instance */
137#define	IP_FW_NAT64CLAT_CONFIG	162	/* Modify clat NAT64 instance */
138#define	IP_FW_NAT64CLAT_LIST	163	/* List clat NAT64 instances */
139#define	IP_FW_NAT64CLAT_STATS	164	/* Get NAT64CLAT instance statistics */
140#define	IP_FW_NAT64CLAT_RESET_STATS 165	/* Reset NAT64CLAT instance statistics */
141
142/*
143 * The kernel representation of ipfw rules is made of a list of
144 * 'instructions' (for all practical purposes equivalent to BPF
145 * instructions), which specify which fields of the packet
146 * (or its metadata) should be analysed.
147 *
148 * Each instruction is stored in a structure which begins with
149 * "ipfw_insn", and can contain extra fields depending on the
150 * instruction type (listed below).
151 * Note that the code is written so that individual instructions
152 * have a size which is a multiple of 32 bits. This means that, if
153 * such structures contain pointers or other 64-bit entities,
154 * (there is just one instance now) they may end up unaligned on
155 * 64-bit architectures, so the must be handled with care.
156 *
157 * "enum ipfw_opcodes" are the opcodes supported. We can have up
158 * to 256 different opcodes. When adding new opcodes, they should
159 * be appended to the end of the opcode list before O_LAST_OPCODE,
160 * this will prevent the ABI from being broken, otherwise users
161 * will have to recompile ipfw(8) when they update the kernel.
162 */
163
164enum ipfw_opcodes {		/* arguments (4 byte each)	*/
165	O_NOP,
166
167	O_IP_SRC,		/* u32 = IP			*/
168	O_IP_SRC_MASK,		/* ip = IP/mask			*/
169	O_IP_SRC_ME,		/* none				*/
170	O_IP_SRC_SET,		/* u32=base, arg1=len, bitmap	*/
171
172	O_IP_DST,		/* u32 = IP			*/
173	O_IP_DST_MASK,		/* ip = IP/mask			*/
174	O_IP_DST_ME,		/* none				*/
175	O_IP_DST_SET,		/* u32=base, arg1=len, bitmap	*/
176
177	O_IP_SRCPORT,		/* (n)port list:mask 4 byte ea	*/
178	O_IP_DSTPORT,		/* (n)port list:mask 4 byte ea	*/
179	O_PROTO,		/* arg1=protocol		*/
180
181	O_MACADDR2,		/* 2 mac addr:mask		*/
182	O_MAC_TYPE,		/* same as srcport		*/
183
184	O_LAYER2,		/* none				*/
185	O_IN,			/* none				*/
186	O_FRAG,			/* none				*/
187
188	O_RECV,			/* none				*/
189	O_XMIT,			/* none				*/
190	O_VIA,			/* none				*/
191
192	O_IPOPT,		/* arg1 = 2*u8 bitmap		*/
193	O_IPLEN,		/* arg1 = len			*/
194	O_IPID,			/* arg1 = id			*/
195
196	O_IPTOS,		/* arg1 = id			*/
197	O_IPPRECEDENCE,		/* arg1 = precedence << 5	*/
198	O_IPTTL,		/* arg1 = TTL			*/
199
200	O_IPVER,		/* arg1 = version		*/
201	O_UID,			/* u32 = id			*/
202	O_GID,			/* u32 = id			*/
203	O_ESTAB,		/* none (tcp established)	*/
204	O_TCPFLAGS,		/* arg1 = 2*u8 bitmap		*/
205	O_TCPWIN,		/* arg1 = desired win		*/
206	O_TCPSEQ,		/* u32 = desired seq.		*/
207	O_TCPACK,		/* u32 = desired seq.		*/
208	O_ICMPTYPE,		/* u32 = icmp bitmap		*/
209	O_TCPOPTS,		/* arg1 = 2*u8 bitmap		*/
210
211	O_VERREVPATH,		/* none				*/
212	O_VERSRCREACH,		/* none				*/
213
214	O_PROBE_STATE,		/* none				*/
215	O_KEEP_STATE,		/* none				*/
216	O_LIMIT,		/* ipfw_insn_limit		*/
217	O_LIMIT_PARENT,		/* dyn_type, not an opcode.	*/
218
219	/*
220	 * These are really 'actions'.
221	 */
222
223	O_LOG,			/* ipfw_insn_log		*/
224	O_PROB,			/* u32 = match probability	*/
225
226	O_CHECK_STATE,		/* none				*/
227	O_ACCEPT,		/* none				*/
228	O_DENY,			/* none 			*/
229	O_REJECT,		/* arg1=icmp arg (same as deny)	*/
230	O_COUNT,		/* none				*/
231	O_SKIPTO,		/* arg1=next rule number	*/
232	O_PIPE,			/* arg1=pipe number		*/
233	O_QUEUE,		/* arg1=queue number		*/
234	O_DIVERT,		/* arg1=port number		*/
235	O_TEE,			/* arg1=port number		*/
236	O_FORWARD_IP,		/* fwd sockaddr			*/
237	O_FORWARD_MAC,		/* fwd mac			*/
238	O_NAT,                  /* nope                         */
239	O_REASS,                /* none                         */
240
241	/*
242	 * More opcodes.
243	 */
244	O_IPSEC,		/* has ipsec history 		*/
245	O_IP_SRC_LOOKUP,	/* arg1=table number, u32=value	*/
246	O_IP_DST_LOOKUP,	/* arg1=table number, u32=value	*/
247	O_ANTISPOOF,		/* none				*/
248	O_JAIL,			/* u32 = id			*/
249	O_ALTQ,			/* u32 = altq classif. qid	*/
250	O_DIVERTED,		/* arg1=bitmap (1:loop, 2:out)	*/
251	O_TCPDATALEN,		/* arg1 = tcp data len		*/
252	O_IP6_SRC,		/* address without mask		*/
253	O_IP6_SRC_ME,		/* my addresses			*/
254	O_IP6_SRC_MASK,		/* address with the mask	*/
255	O_IP6_DST,
256	O_IP6_DST_ME,
257	O_IP6_DST_MASK,
258	O_FLOW6ID,		/* for flow id tag in the ipv6 pkt */
259	O_ICMP6TYPE,		/* icmp6 packet type filtering	*/
260	O_EXT_HDR,		/* filtering for ipv6 extension header */
261	O_IP6,
262
263	/*
264	 * actions for ng_ipfw
265	 */
266	O_NETGRAPH,		/* send to ng_ipfw		*/
267	O_NGTEE,		/* copy to ng_ipfw		*/
268
269	O_IP4,
270
271	O_UNREACH6,		/* arg1=icmpv6 code arg (deny)  */
272
273	O_TAG,   		/* arg1=tag number */
274	O_TAGGED,		/* arg1=tag number */
275
276	O_SETFIB,		/* arg1=FIB number */
277	O_FIB,			/* arg1=FIB desired fib number */
278
279	O_SOCKARG,		/* socket argument */
280
281	O_CALLRETURN,		/* arg1=called rule number */
282
283	O_FORWARD_IP6,		/* fwd sockaddr_in6             */
284
285	O_DSCP,			/* 2 u32 = DSCP mask */
286	O_SETDSCP,		/* arg1=DSCP value */
287	O_IP_FLOW_LOOKUP,	/* arg1=table number, u32=value	*/
288
289	O_EXTERNAL_ACTION,	/* arg1=id of external action handler */
290	O_EXTERNAL_INSTANCE,	/* arg1=id of eaction handler instance */
291	O_EXTERNAL_DATA,	/* variable length data */
292
293	O_SKIP_ACTION,		/* none				*/
294	O_TCPMSS,		/* arg1=MSS value */
295
296	O_MAC_SRC_LOOKUP,	/* arg1=table number, u32=value */
297	O_MAC_DST_LOOKUP,	/* arg1=table number, u32=value */
298
299	O_SETMARK,		/* u32 = value */
300	O_MARK,			/* 2 u32 = value, bitmask */
301
302	O_LAST_OPCODE		/* not an opcode!		*/
303};
304
305/*
306 * Defines key types used by lookup instruction
307 */
308enum ipfw_table_lookup_type {
309	LOOKUP_DST_IP,
310	LOOKUP_SRC_IP,
311	LOOKUP_DST_PORT,
312	LOOKUP_SRC_PORT,
313	LOOKUP_UID,
314	LOOKUP_JAIL,
315	LOOKUP_DSCP,
316	LOOKUP_DST_MAC,
317	LOOKUP_SRC_MAC,
318	LOOKUP_MARK,
319};
320
321/*
322 * The extension header are filtered only for presence using a bit
323 * vector with a flag for each header.
324 */
325#define EXT_FRAGMENT	0x1
326#define EXT_HOPOPTS	0x2
327#define EXT_ROUTING	0x4
328#define EXT_AH		0x8
329#define EXT_ESP		0x10
330#define EXT_DSTOPTS	0x20
331#define EXT_RTHDR0		0x40
332#define EXT_RTHDR2		0x80
333
334/*
335 * Template for instructions.
336 *
337 * ipfw_insn is used for all instructions which require no operands,
338 * a single 16-bit value (arg1), or a couple of 8-bit values.
339 *
340 * For other instructions which require different/larger arguments
341 * we have derived structures, ipfw_insn_*.
342 *
343 * The size of the instruction (in 32-bit words) is in the low
344 * 6 bits of "len". The 2 remaining bits are used to implement
345 * NOT and OR on individual instructions. Given a type, you can
346 * compute the length to be put in "len" using F_INSN_SIZE(t)
347 *
348 * F_NOT	negates the match result of the instruction.
349 *
350 * F_OR		is used to build or blocks. By default, instructions
351 *		are evaluated as part of a logical AND. An "or" block
352 *		{ X or Y or Z } contains F_OR set in all but the last
353 *		instruction of the block. A match will cause the code
354 *		to skip past the last instruction of the block.
355 *
356 * NOTA BENE: in a couple of places we assume that
357 *	sizeof(ipfw_insn) == sizeof(u_int32_t)
358 * this needs to be fixed.
359 *
360 */
361typedef struct	_ipfw_insn {	/* template for instructions */
362	_Alignas(_Alignof(u_int32_t)) u_int8_t 	opcode;
363	u_int8_t	len;	/* number of 32-bit words */
364#define	F_NOT		0x80
365#define	F_OR		0x40
366#define	F_LEN_MASK	0x3f
367#define	F_LEN(cmd)	((cmd)->len & F_LEN_MASK)
368
369	u_int16_t	arg1;
370} ipfw_insn;
371
372/*
373 * The F_INSN_SIZE(type) computes the size, in 4-byte words, of
374 * a given type.
375 */
376#define	F_INSN_SIZE(t)	((sizeof (t))/sizeof(u_int32_t))
377
378/*
379 * This is used to store an array of 16-bit entries (ports etc.)
380 */
381typedef struct	_ipfw_insn_u16 {
382	ipfw_insn o;
383	u_int16_t ports[2];	/* there may be more */
384} ipfw_insn_u16;
385
386/*
387 * This is used to store an array of 32-bit entries
388 * (uid, single IPv4 addresses etc.)
389 */
390typedef struct	_ipfw_insn_u32 {
391	ipfw_insn o;
392	u_int32_t d[1];	/* one or more */
393} ipfw_insn_u32;
394
395/*
396 * This is used to store IP addr-mask pairs.
397 */
398typedef struct	_ipfw_insn_ip {
399	ipfw_insn o;
400	struct in_addr	addr;
401	struct in_addr	mask;
402} ipfw_insn_ip;
403
404/*
405 * This is used to forward to a given address (ip).
406 */
407typedef struct  _ipfw_insn_sa {
408	ipfw_insn o;
409	struct sockaddr_in sa;
410} ipfw_insn_sa;
411
412/*
413 * This is used to forward to a given address (ipv6).
414 */
415typedef struct _ipfw_insn_sa6 {
416	ipfw_insn o;
417	struct sockaddr_in6 sa;
418} ipfw_insn_sa6;
419
420/*
421 * This is used for MAC addr-mask pairs.
422 */
423typedef struct	_ipfw_insn_mac {
424	ipfw_insn o;
425	u_char addr[12];	/* dst[6] + src[6] */
426	u_char mask[12];	/* dst[6] + src[6] */
427} ipfw_insn_mac;
428
429/*
430 * This is used for interface match rules (recv xx, xmit xx).
431 */
432typedef struct	_ipfw_insn_if {
433	ipfw_insn o;
434	union {
435		struct in_addr ip;
436		int glob;
437		uint16_t kidx;
438	} p;
439	char name[IFNAMSIZ];
440} ipfw_insn_if;
441
442/*
443 * This is used for storing an altq queue id number.
444 */
445typedef struct _ipfw_insn_altq {
446	ipfw_insn	o;
447	u_int32_t	qid;
448} ipfw_insn_altq;
449
450/*
451 * This is used for limit rules.
452 */
453typedef struct	_ipfw_insn_limit {
454	ipfw_insn o;
455	u_int8_t _pad;
456	u_int8_t limit_mask;	/* combination of DYN_* below	*/
457#define	DYN_SRC_ADDR	0x1
458#define	DYN_SRC_PORT	0x2
459#define	DYN_DST_ADDR	0x4
460#define	DYN_DST_PORT	0x8
461
462	u_int16_t conn_limit;
463} ipfw_insn_limit;
464
465/*
466 * This is used for log instructions.
467 */
468typedef struct  _ipfw_insn_log {
469        ipfw_insn o;
470	u_int32_t max_log;	/* how many do we log -- 0 = all */
471	u_int32_t log_left;	/* how many left to log 	*/
472} ipfw_insn_log;
473
474/* Legacy NAT structures, compat only */
475#ifndef	_KERNEL
476/*
477 * Data structures required by both ipfw(8) and ipfw(4) but not part of the
478 * management API are protected by IPFW_INTERNAL.
479 */
480#ifdef IPFW_INTERNAL
481/* Server pool support (LSNAT). */
482struct cfg_spool {
483	LIST_ENTRY(cfg_spool)   _next;          /* chain of spool instances */
484	struct in_addr          addr;
485	u_short                 port;
486};
487#endif
488
489/* Redirect modes id. */
490#define REDIR_ADDR      0x01
491#define REDIR_PORT      0x02
492#define REDIR_PROTO     0x04
493
494#ifdef IPFW_INTERNAL
495/* Nat redirect configuration. */
496struct cfg_redir {
497	LIST_ENTRY(cfg_redir)   _next;          /* chain of redir instances */
498	u_int16_t               mode;           /* type of redirect mode */
499	struct in_addr	        laddr;          /* local ip address */
500	struct in_addr	        paddr;          /* public ip address */
501	struct in_addr	        raddr;          /* remote ip address */
502	u_short                 lport;          /* local port */
503	u_short                 pport;          /* public port */
504	u_short                 rport;          /* remote port  */
505	u_short                 pport_cnt;      /* number of public ports */
506	u_short                 rport_cnt;      /* number of remote ports */
507	int                     proto;          /* protocol: tcp/udp */
508	struct alias_link       **alink;
509	/* num of entry in spool chain */
510	u_int16_t               spool_cnt;
511	/* chain of spool instances */
512	LIST_HEAD(spool_chain, cfg_spool) spool_chain;
513};
514#endif
515
516#ifdef IPFW_INTERNAL
517/* Nat configuration data struct. */
518struct cfg_nat {
519	/* chain of nat instances */
520	LIST_ENTRY(cfg_nat)     _next;
521	int                     id;                     /* nat id */
522	struct in_addr          ip;                     /* nat ip address */
523	char                    if_name[IF_NAMESIZE];   /* interface name */
524	int                     mode;                   /* aliasing mode */
525	struct libalias	        *lib;                   /* libalias instance */
526	/* number of entry in spool chain */
527	int                     redir_cnt;
528	/* chain of redir instances */
529	LIST_HEAD(redir_chain, cfg_redir) redir_chain;
530};
531#endif
532
533#define SOF_NAT         sizeof(struct cfg_nat)
534#define SOF_REDIR       sizeof(struct cfg_redir)
535#define SOF_SPOOL       sizeof(struct cfg_spool)
536
537#endif	/* ifndef _KERNEL */
538
539struct nat44_cfg_spool {
540	struct in_addr	addr;
541	uint16_t	port;
542	uint16_t	spare;
543};
544#define NAT44_REDIR_ADDR	0x01
545#define NAT44_REDIR_PORT	0x02
546#define NAT44_REDIR_PROTO	0x04
547
548/* Nat redirect configuration. */
549struct nat44_cfg_redir {
550	struct in_addr	laddr;		/* local ip address */
551	struct in_addr	paddr;		/* public ip address */
552	struct in_addr	raddr;		/* remote ip address */
553	uint16_t	lport;		/* local port */
554	uint16_t	pport;		/* public port */
555	uint16_t	rport;		/* remote port  */
556	uint16_t	pport_cnt;	/* number of public ports */
557	uint16_t	rport_cnt;	/* number of remote ports */
558	uint16_t	mode;		/* type of redirect mode */
559	uint16_t	spool_cnt;	/* num of entry in spool chain */
560	uint16_t	spare;
561	uint32_t	proto;		/* protocol: tcp/udp */
562};
563
564/* Nat configuration data struct. */
565struct nat44_cfg_nat {
566	char		name[64];	/* nat name */
567	char		if_name[64];	/* interface name */
568	uint32_t	size;		/* structure size incl. redirs */
569	struct in_addr	ip;		/* nat IPv4 address */
570	uint32_t	mode;		/* aliasing mode */
571	uint32_t	redir_cnt;	/* number of entry in spool chain */
572	u_short		alias_port_lo;	/* low range for port aliasing */
573	u_short		alias_port_hi;	/* high range for port aliasing */
574};
575
576/* Nat command. */
577typedef struct	_ipfw_insn_nat {
578 	ipfw_insn	o;
579 	struct cfg_nat *nat;
580} ipfw_insn_nat;
581
582/* Apply ipv6 mask on ipv6 addr */
583#define APPLY_MASK(addr,mask)	do {					\
584    (addr)->__u6_addr.__u6_addr32[0] &= (mask)->__u6_addr.__u6_addr32[0]; \
585    (addr)->__u6_addr.__u6_addr32[1] &= (mask)->__u6_addr.__u6_addr32[1]; \
586    (addr)->__u6_addr.__u6_addr32[2] &= (mask)->__u6_addr.__u6_addr32[2]; \
587    (addr)->__u6_addr.__u6_addr32[3] &= (mask)->__u6_addr.__u6_addr32[3]; \
588} while (0)
589
590/* Structure for ipv6 */
591typedef struct _ipfw_insn_ip6 {
592       ipfw_insn o;
593       struct in6_addr addr6;
594       struct in6_addr mask6;
595} ipfw_insn_ip6;
596
597/* Used to support icmp6 types */
598typedef struct _ipfw_insn_icmp6 {
599       ipfw_insn o;
600       uint32_t d[7]; /* XXX This number si related to the netinet/icmp6.h
601                       *     define ICMP6_MAXTYPE
602                       *     as follows: n = ICMP6_MAXTYPE/32 + 1
603                        *     Actually is 203
604                       */
605} ipfw_insn_icmp6;
606
607/*
608 * Here we have the structure representing an ipfw rule.
609 *
610 * Layout:
611 * struct ip_fw_rule
612 * [ counter block, size = rule->cntr_len ]
613 * [ one or more instructions, size = rule->cmd_len * 4 ]
614 *
615 * It starts with a general area (with link fields).
616 * Counter block may be next (if rule->cntr_len > 0),
617 * followed by an array of one or more instructions, which the code
618 * accesses as an array of 32-bit values. rule->cmd_len represents
619 * the total instructions legth in u32 worrd, while act_ofs represents
620 * rule action offset in u32 words.
621 *
622 * When assembling instruction, remember the following:
623 *
624 *  + if a rule has a "keep-state" (or "limit") option, then the
625 *	first instruction (at r->cmd) MUST BE an O_PROBE_STATE
626 *  + if a rule has a "log" option, then the first action
627 *	(at ACTION_PTR(r)) MUST be O_LOG
628 *  + if a rule has an "altq" option, it comes after "log"
629 *  + if a rule has an O_TAG option, it comes after "log" and "altq"
630 *
631 *
632 * All structures (excluding instructions) are u64-aligned.
633 * Please keep this.
634 */
635
636struct ip_fw_rule {
637	uint16_t	act_ofs;	/* offset of action in 32-bit units */
638	uint16_t	cmd_len;	/* # of 32-bit words in cmd	*/
639	uint16_t	spare;
640	uint8_t		set;		/* rule set (0..31)		*/
641	uint8_t		flags;		/* rule flags			*/
642	uint32_t	rulenum;	/* rule number			*/
643	uint32_t	id;		/* rule id			*/
644
645	ipfw_insn	cmd[1];		/* storage for commands		*/
646};
647#define	IPFW_RULE_NOOPT		0x01	/* Has no options in body	*/
648#define	IPFW_RULE_JUSTOPTS	0x02	/* new format of rule body	*/
649
650/* Unaligned version */
651
652/* Base ipfw rule counter block. */
653struct ip_fw_bcounter {
654	uint16_t	size;		/* Size of counter block, bytes	*/
655	uint8_t		flags;		/* flags for given block	*/
656	uint8_t		spare;
657	uint32_t	timestamp;	/* tv_sec of last match		*/
658	uint64_t	pcnt;		/* Packet counter		*/
659	uint64_t	bcnt;		/* Byte counter			*/
660};
661
662#ifndef	_KERNEL
663/*
664 * Legacy rule format
665 */
666struct ip_fw {
667	struct ip_fw	*x_next;	/* linked list of rules		*/
668	struct ip_fw	*next_rule;	/* ptr to next [skipto] rule	*/
669	/* 'next_rule' is used to pass up 'set_disable' status		*/
670
671	uint16_t	act_ofs;	/* offset of action in 32-bit units */
672	uint16_t	cmd_len;	/* # of 32-bit words in cmd	*/
673	uint16_t	rulenum;	/* rule number			*/
674	uint8_t		set;		/* rule set (0..31)		*/
675	uint8_t		_pad;		/* padding			*/
676	uint32_t	id;		/* rule id */
677
678	/* These fields are present in all rules.			*/
679	uint64_t	pcnt;		/* Packet counter		*/
680	uint64_t	bcnt;		/* Byte counter			*/
681	uint32_t	timestamp;	/* tv_sec of last match		*/
682
683	ipfw_insn	cmd[1];		/* storage for commands		*/
684};
685#endif
686
687#define ACTION_PTR(rule)				\
688	(ipfw_insn *)( (u_int32_t *)((rule)->cmd) + ((rule)->act_ofs) )
689
690#define RULESIZE(rule)  (sizeof(*(rule)) + (rule)->cmd_len * 4 - 4)
691
692#if 1 // should be moved to in.h
693/*
694 * This structure is used as a flow mask and a flow id for various
695 * parts of the code.
696 * addr_type is used in userland and kernel to mark the address type.
697 * fib is used in the kernel to record the fib in use.
698 * _flags is used in the kernel to store tcp flags for dynamic rules.
699 */
700struct ipfw_flow_id {
701	uint32_t	dst_ip;
702	uint32_t	src_ip;
703	uint16_t	dst_port;
704	uint16_t	src_port;
705	uint8_t		fib;	/* XXX: must be uint16_t */
706	uint8_t		proto;
707	uint8_t		_flags;	/* protocol-specific flags */
708	uint8_t		addr_type; /* 4=ip4, 6=ip6, 1=ether ? */
709	struct in6_addr dst_ip6;
710	struct in6_addr src_ip6;
711	uint32_t	flow_id6;
712	uint32_t	extra; /* queue/pipe or frag_id */
713};
714#endif
715
716#define	IS_IP4_FLOW_ID(id)	((id)->addr_type == 4)
717#define IS_IP6_FLOW_ID(id)	((id)->addr_type == 6)
718
719/*
720 * Dynamic ipfw rule.
721 */
722typedef struct _ipfw_dyn_rule ipfw_dyn_rule;
723
724struct _ipfw_dyn_rule {
725	ipfw_dyn_rule	*next;		/* linked list of rules.	*/
726	struct ip_fw *rule;		/* pointer to rule		*/
727	/* 'rule' is used to pass up the rule number (from the parent)	*/
728
729	ipfw_dyn_rule *parent;		/* pointer to parent rule	*/
730	u_int64_t	pcnt;		/* packet match counter		*/
731	u_int64_t	bcnt;		/* byte match counter		*/
732	struct ipfw_flow_id id;		/* (masked) flow id		*/
733	u_int32_t	expire;		/* expire time			*/
734	u_int32_t	bucket;		/* which bucket in hash table	*/
735	u_int32_t	state;		/* state of this rule (typically a
736					 * combination of TCP flags)
737					 */
738#define	IPFW_DYN_ORPHANED	0x40000	/* state's parent rule was deleted */
739	u_int32_t	ack_fwd;	/* most recent ACKs in forward	*/
740	u_int32_t	ack_rev;	/* and reverse directions (used	*/
741					/* to generate keepalives)	*/
742	u_int16_t	dyn_type;	/* rule type			*/
743	u_int16_t	count;		/* refcount			*/
744	u_int16_t	kidx;		/* index of named object */
745} __packed __aligned(8);
746
747/*
748 * Definitions for IP option names.
749 */
750#define	IP_FW_IPOPT_LSRR	0x01
751#define	IP_FW_IPOPT_SSRR	0x02
752#define	IP_FW_IPOPT_RR		0x04
753#define	IP_FW_IPOPT_TS		0x08
754
755/*
756 * Definitions for TCP option names.
757 */
758#define	IP_FW_TCPOPT_MSS	0x01
759#define	IP_FW_TCPOPT_WINDOW	0x02
760#define	IP_FW_TCPOPT_SACK	0x04
761#define	IP_FW_TCPOPT_TS		0x08
762#define	IP_FW_TCPOPT_CC		0x10
763
764#define	ICMP_REJECT_RST		0x100	/* fake ICMP code (send a TCP RST) */
765#define	ICMP6_UNREACH_RST	0x100	/* fake ICMPv6 code (send a TCP RST) */
766#define	ICMP_REJECT_ABORT	0x101	/* fake ICMP code (send an SCTP ABORT) */
767#define	ICMP6_UNREACH_ABORT	0x101	/* fake ICMPv6 code (send an SCTP ABORT) */
768
769/*
770 * These are used for lookup tables.
771 */
772
773#define	IPFW_TABLE_ADDR		1	/* Table for holding IPv4/IPv6 prefixes */
774#define	IPFW_TABLE_INTERFACE	2	/* Table for holding interface names */
775#define	IPFW_TABLE_NUMBER	3	/* Table for holding ports/uid/gid/etc */
776#define	IPFW_TABLE_FLOW		4	/* Table for holding flow data */
777#define	IPFW_TABLE_MAC		5	/* Table for holding mac address prefixes */
778#define	IPFW_TABLE_MAXTYPE	5	/* Maximum valid number */
779
780#define	IPFW_TABLE_CIDR	IPFW_TABLE_ADDR	/* compat */
781
782/* Value types */
783#define	IPFW_VTYPE_LEGACY	0xFFFFFFFF	/* All data is filled in */
784#define	IPFW_VTYPE_SKIPTO	0x00000001	/* skipto/call/callreturn */
785#define	IPFW_VTYPE_PIPE		0x00000002	/* pipe/queue */
786#define	IPFW_VTYPE_FIB		0x00000004	/* setfib */
787#define	IPFW_VTYPE_NAT		0x00000008	/* nat */
788#define	IPFW_VTYPE_DSCP		0x00000010	/* dscp */
789#define	IPFW_VTYPE_TAG		0x00000020	/* tag/untag */
790#define	IPFW_VTYPE_DIVERT	0x00000040	/* divert/tee */
791#define	IPFW_VTYPE_NETGRAPH	0x00000080	/* netgraph/ngtee */
792#define	IPFW_VTYPE_LIMIT	0x00000100	/* limit */
793#define	IPFW_VTYPE_NH4		0x00000200	/* IPv4 nexthop */
794#define	IPFW_VTYPE_NH6		0x00000400	/* IPv6 nexthop */
795#define	IPFW_VTYPE_MARK		0x00000800	/* [fw]mark */
796
797/* MAC/InfiniBand/etc address length */
798#define	IPFW_MAX_L2_ADDR_LEN	20
799
800typedef struct	_ipfw_table_entry {
801	in_addr_t	addr;		/* network address		*/
802	u_int32_t	value;		/* value			*/
803	u_int16_t	tbl;		/* table number			*/
804	u_int8_t	masklen;	/* mask length			*/
805} ipfw_table_entry;
806
807typedef struct	_ipfw_table_xentry {
808	uint16_t	len;		/* Total entry length		*/
809	uint8_t		type;		/* entry type			*/
810	uint8_t		masklen;	/* mask length			*/
811	uint16_t	tbl;		/* table number			*/
812	uint16_t	flags;		/* record flags			*/
813	uint32_t	value;		/* value			*/
814	union {
815		/* Longest field needs to be aligned by 4-byte boundary	*/
816		struct in6_addr	addr6;	/* IPv6 address 		*/
817		char	iface[IF_NAMESIZE];	/* interface name	*/
818	} k;
819} ipfw_table_xentry;
820#define	IPFW_TCF_INET	0x01		/* CIDR flags: IPv4 record	*/
821
822typedef struct	_ipfw_table {
823	u_int32_t	size;		/* size of entries in bytes	*/
824	u_int32_t	cnt;		/* # of entries			*/
825	u_int16_t	tbl;		/* table number			*/
826	ipfw_table_entry ent[0];	/* entries			*/
827} ipfw_table;
828
829typedef struct	_ipfw_xtable {
830	ip_fw3_opheader	opheader;	/* IP_FW3 opcode */
831	uint32_t	size;		/* size of entries in bytes	*/
832	uint32_t	cnt;		/* # of entries			*/
833	uint16_t	tbl;		/* table number			*/
834	uint8_t		type;		/* table type			*/
835	ipfw_table_xentry xent[0];	/* entries			*/
836} ipfw_xtable;
837
838typedef struct  _ipfw_obj_tlv {
839	uint16_t        type;		/* TLV type */
840	uint16_t	flags;		/* TLV-specific flags		*/
841	uint32_t        length;		/* Total length, aligned to u64	*/
842} ipfw_obj_tlv;
843#define	IPFW_TLV_TBL_NAME	1
844#define	IPFW_TLV_TBLNAME_LIST	2
845#define	IPFW_TLV_RULE_LIST	3
846#define	IPFW_TLV_DYNSTATE_LIST	4
847#define	IPFW_TLV_TBL_ENT	5
848#define	IPFW_TLV_DYN_ENT	6
849#define	IPFW_TLV_RULE_ENT	7
850#define	IPFW_TLV_TBLENT_LIST	8
851#define	IPFW_TLV_RANGE		9
852#define	IPFW_TLV_EACTION	10
853#define	IPFW_TLV_COUNTERS	11
854#define	IPFW_TLV_OBJDATA	12
855#define	IPFW_TLV_STATE_NAME	14
856
857#define	IPFW_TLV_EACTION_BASE	1000
858#define	IPFW_TLV_EACTION_NAME(arg)	(IPFW_TLV_EACTION_BASE + (arg))
859
860typedef struct _ipfw_obj_data {
861	ipfw_obj_tlv	head;
862	void		*data[0];
863} ipfw_obj_data;
864
865/* Object name TLV */
866typedef struct _ipfw_obj_ntlv {
867	ipfw_obj_tlv	head;		/* TLV header			*/
868	uint16_t	idx;		/* Name index			*/
869	uint8_t		set;		/* set, if applicable		*/
870	uint8_t		type;		/* object type, if applicable	*/
871	uint32_t	spare;		/* unused			*/
872	char		name[64];	/* Null-terminated name		*/
873} ipfw_obj_ntlv;
874
875/* IPv4/IPv6 L4 flow description */
876struct tflow_entry {
877	uint8_t		af;
878	uint8_t		proto;
879	uint16_t	spare;
880	uint16_t	sport;
881	uint16_t	dport;
882	union {
883		struct {
884			struct in_addr	sip;
885			struct in_addr	dip;
886		} a4;
887		struct {
888			struct in6_addr	sip6;
889			struct in6_addr	dip6;
890		} a6;
891	} a;
892};
893
894/* 64-byte structure representing multi-field table value */
895typedef struct _ipfw_table_value {
896	uint32_t	tag;		/* O_TAG/O_TAGGED */
897	uint32_t	pipe;		/* O_PIPE/O_QUEUE */
898	uint16_t	divert;		/* O_DIVERT/O_TEE */
899	uint16_t	skipto;		/* skipto, CALLRET */
900	uint32_t	netgraph;	/* O_NETGRAPH/O_NGTEE */
901	uint32_t	fib;		/* O_SETFIB */
902	uint32_t	nat;		/* O_NAT */
903	uint32_t	nh4;
904	uint8_t		dscp;
905	uint8_t		spare0;
906	uint16_t	kidx;		/* value kernel index */
907	struct in6_addr	nh6;
908	uint32_t	limit;		/* O_LIMIT */
909	uint32_t	zoneid;		/* scope zone id for nh6 */
910	uint32_t	mark;		/* O_SETMARK/O_MARK */
911	uint32_t	refcnt;		/* XXX 64-bit in kernel */
912} ipfw_table_value;
913
914/* Table entry TLV */
915typedef struct	_ipfw_obj_tentry {
916	ipfw_obj_tlv	head;		/* TLV header			*/
917	uint8_t		subtype;	/* subtype (IPv4,IPv6)		*/
918	uint8_t		masklen;	/* mask length			*/
919	uint8_t		result;		/* request result		*/
920	uint8_t		spare0;
921	uint16_t	idx;		/* Table name index		*/
922	uint16_t	spare1;
923	union {
924		/* Longest field needs to be aligned by 8-byte boundary	*/
925		struct in_addr		addr;		/* IPv4 address		*/
926		uint32_t		key;		/* uid/gid/port		*/
927		struct in6_addr		addr6;		/* IPv6 address 	*/
928		char	iface[IF_NAMESIZE];		/* interface name	*/
929		u_char	mac[IPFW_MAX_L2_ADDR_LEN];	/* MAC address		*/
930		struct tflow_entry	flow;
931	} k;
932	union {
933		ipfw_table_value	value;	/* value data */
934		uint32_t		kidx;	/* value kernel index */
935	} v;
936} ipfw_obj_tentry;
937#define	IPFW_TF_UPDATE	0x01		/* Update record if exists	*/
938/* Container TLV */
939#define	IPFW_CTF_ATOMIC	0x01		/* Perform atomic operation	*/
940/* Operation results */
941#define	IPFW_TR_IGNORED		0	/* Entry was ignored (rollback)	*/
942#define	IPFW_TR_ADDED		1	/* Entry was successfully added	*/
943#define	IPFW_TR_UPDATED		2	/* Entry was successfully updated*/
944#define	IPFW_TR_DELETED		3	/* Entry was successfully deleted*/
945#define	IPFW_TR_LIMIT		4	/* Entry was ignored (limit)	*/
946#define	IPFW_TR_NOTFOUND	5	/* Entry was not found		*/
947#define	IPFW_TR_EXISTS		6	/* Entry already exists		*/
948#define	IPFW_TR_ERROR		7	/* Request has failed (unknown)	*/
949
950typedef struct _ipfw_obj_dyntlv {
951	ipfw_obj_tlv	head;
952	ipfw_dyn_rule	state;
953} ipfw_obj_dyntlv;
954#define	IPFW_DF_LAST	0x01		/* Last state in chain		*/
955
956/* Containter TLVs */
957typedef struct _ipfw_obj_ctlv {
958	ipfw_obj_tlv	head;		/* TLV header			*/
959	uint32_t	count;		/* Number of sub-TLVs		*/
960	uint16_t	objsize;	/* Single object size		*/
961	uint8_t		version;	/* TLV version			*/
962	uint8_t		flags;		/* TLV-specific flags		*/
963} ipfw_obj_ctlv;
964
965/* Range TLV */
966typedef struct _ipfw_range_tlv {
967	ipfw_obj_tlv	head;		/* TLV header			*/
968	uint32_t	flags;		/* Range flags			*/
969	uint16_t	start_rule;	/* Range start			*/
970	uint16_t	end_rule;	/* Range end			*/
971	uint32_t	set;		/* Range set to match		 */
972	uint32_t	new_set;	/* New set to move/swap to	*/
973} ipfw_range_tlv;
974#define	IPFW_RCFLAG_RANGE	0x01	/* rule range is set		*/
975#define	IPFW_RCFLAG_ALL		0x02	/* match ALL rules		*/
976#define	IPFW_RCFLAG_SET		0x04	/* match rules in given set	*/
977#define	IPFW_RCFLAG_DYNAMIC	0x08	/* match only dynamic states	*/
978/* User-settable flags */
979#define	IPFW_RCFLAG_USER	(IPFW_RCFLAG_RANGE | IPFW_RCFLAG_ALL | \
980	IPFW_RCFLAG_SET | IPFW_RCFLAG_DYNAMIC)
981/* Internally used flags */
982#define	IPFW_RCFLAG_DEFAULT	0x0100	/* Do not skip default rule	*/
983
984typedef struct _ipfw_ta_tinfo {
985	uint32_t	flags;		/* Format flags			*/
986	uint32_t	spare;
987	uint8_t		taclass4;	/* algorithm class		*/
988	uint8_t		spare4;
989	uint16_t	itemsize4;	/* item size in runtime		*/
990	uint32_t	size4;		/* runtime structure size	*/
991	uint32_t	count4;		/* number of items in runtime	*/
992	uint8_t		taclass6;	/* algorithm class		*/
993	uint8_t		spare6;
994	uint16_t	itemsize6;	/* item size in runtime		*/
995	uint32_t	size6;		/* runtime structure size	*/
996	uint32_t	count6;		/* number of items in runtime	*/
997} ipfw_ta_tinfo;
998#define	IPFW_TACLASS_HASH	1	/* algo is based on hash	*/
999#define	IPFW_TACLASS_ARRAY	2	/* algo is based on array	*/
1000#define	IPFW_TACLASS_RADIX	3	/* algo is based on radix tree	*/
1001
1002#define	IPFW_TATFLAGS_DATA	0x0001		/* Has data filled in	*/
1003#define	IPFW_TATFLAGS_AFDATA	0x0002		/* Separate data per AF	*/
1004#define	IPFW_TATFLAGS_AFITEM	0x0004		/* diff. items per AF	*/
1005
1006typedef struct _ipfw_xtable_info {
1007	uint8_t		type;		/* table type (addr,iface,..)	*/
1008	uint8_t		tflags;		/* type flags			*/
1009	uint16_t	mflags;		/* modification flags		*/
1010	uint16_t	flags;		/* generic table flags		*/
1011	uint16_t	spare[3];
1012	uint32_t	vmask;		/* bitmask with value types 	*/
1013	uint32_t	set;		/* set table is in		*/
1014	uint32_t	kidx;		/* kernel index			*/
1015	uint32_t	refcnt;		/* number of references		*/
1016	uint32_t	count;		/* Number of records		*/
1017	uint32_t	size;		/* Total size of records(export)*/
1018	uint32_t	limit;		/* Max number of records	*/
1019	char		tablename[64];	/* table name */
1020	char		algoname[64];	/* algorithm name		*/
1021	ipfw_ta_tinfo	ta_info;	/* additional algo stats	*/
1022} ipfw_xtable_info;
1023/* Generic table flags */
1024#define	IPFW_TGFLAGS_LOCKED	0x01	/* Tables is locked from changes*/
1025/* Table type-specific flags */
1026#define	IPFW_TFFLAG_SRCIP	0x01
1027#define	IPFW_TFFLAG_DSTIP	0x02
1028#define	IPFW_TFFLAG_SRCPORT	0x04
1029#define	IPFW_TFFLAG_DSTPORT	0x08
1030#define	IPFW_TFFLAG_PROTO	0x10
1031/* Table modification flags */
1032#define	IPFW_TMFLAGS_LIMIT	0x0002	/* Change limit value		*/
1033#define	IPFW_TMFLAGS_LOCK	0x0004	/* Change table lock state	*/
1034
1035typedef struct _ipfw_iface_info {
1036	char		ifname[64];	/* interface name		*/
1037	uint32_t	ifindex;	/* interface index		*/
1038	uint32_t	flags;		/* flags			*/
1039	uint32_t	refcnt;		/* number of references		*/
1040	uint32_t	gencnt;		/* number of changes		*/
1041	uint64_t	spare;
1042} ipfw_iface_info;
1043#define	IPFW_IFFLAG_RESOLVED	0x01	/* Interface exists		*/
1044
1045typedef struct _ipfw_ta_info {
1046	char		algoname[64];	/* algorithm name		*/
1047	uint32_t	type;		/* lookup type			*/
1048	uint32_t	flags;
1049	uint32_t	refcnt;
1050	uint32_t	spare0;
1051	uint64_t	spare1;
1052} ipfw_ta_info;
1053
1054typedef struct _ipfw_obj_header {
1055	ip_fw3_opheader	opheader;	/* IP_FW3 opcode		*/
1056	uint32_t	spare;
1057	uint16_t	idx;		/* object name index		*/
1058	uint8_t		objtype;	/* object type			*/
1059	uint8_t		objsubtype;	/* object subtype		*/
1060	ipfw_obj_ntlv	ntlv;		/* object name tlv		*/
1061} ipfw_obj_header;
1062
1063typedef struct _ipfw_obj_lheader {
1064	ip_fw3_opheader	opheader;	/* IP_FW3 opcode		*/
1065	uint32_t	set_mask;	/* disabled set mask		*/
1066	uint32_t	count;		/* Total objects count		*/
1067	uint32_t	size;		/* Total size (incl. header)	*/
1068	uint32_t	objsize;	/* Size of one object		*/
1069} ipfw_obj_lheader;
1070
1071#define	IPFW_CFG_GET_STATIC	0x01
1072#define	IPFW_CFG_GET_STATES	0x02
1073#define	IPFW_CFG_GET_COUNTERS	0x04
1074typedef struct _ipfw_cfg_lheader {
1075	ip_fw3_opheader	opheader;	/* IP_FW3 opcode		*/
1076	uint32_t	set_mask;	/* enabled set mask		*/
1077	uint32_t	spare;
1078	uint32_t	flags;		/* Request flags		*/
1079	uint32_t	size;		/* neded buffer size		*/
1080	uint32_t	start_rule;
1081	uint32_t	end_rule;
1082} ipfw_cfg_lheader;
1083
1084typedef struct _ipfw_range_header {
1085	ip_fw3_opheader	opheader;	/* IP_FW3 opcode		*/
1086	ipfw_range_tlv	range;
1087} ipfw_range_header;
1088
1089typedef struct _ipfw_sopt_info {
1090	uint16_t	opcode;
1091	uint8_t		version;
1092	uint8_t		dir;
1093	uint8_t		spare;
1094	uint64_t	refcnt;
1095} ipfw_sopt_info;
1096
1097#endif /* _IPFW2_H */
1098