1/*- 2 * SPDX-License-Identifier: BSD-2-Clause 3 * 4 * Copyright (c) 2003 Silicon Graphics International Corp. 5 * Copyright (c) 2014-2017 Alexander Motin <mav@FreeBSD.org> 6 * All rights reserved. 7 * 8 * Redistribution and use in source and binary forms, with or without 9 * modification, are permitted provided that the following conditions 10 * are met: 11 * 1. Redistributions of source code must retain the above copyright 12 * notice, this list of conditions, and the following disclaimer, 13 * without modification. 14 * 2. Redistributions in binary form must reproduce at minimum a disclaimer 15 * substantially similar to the "NO WARRANTY" disclaimer below 16 * ("Disclaimer") and any redistribution must be conditioned upon 17 * including a substantially similar Disclaimer requirement for further 18 * binary redistribution. 19 * 20 * NO WARRANTY 21 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 22 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 23 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR 24 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 25 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 26 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 27 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 28 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 29 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING 30 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 31 * POSSIBILITY OF SUCH DAMAGES. 32 * 33 * $Id: //depot/users/kenm/FreeBSD-test2/sys/cam/ctl/ctl_frontend.h#2 $ 34 */ 35/* 36 * CAM Target Layer front end registration hooks 37 * 38 * Author: Ken Merry <ken@FreeBSD.org> 39 */ 40 41#ifndef _CTL_FRONTEND_H_ 42#define _CTL_FRONTEND_H_ 43 44#include <cam/ctl/ctl_ioctl.h> 45#include <sys/nv.h> 46 47typedef enum { 48 CTL_PORT_STATUS_NONE = 0x00, 49 CTL_PORT_STATUS_ONLINE = 0x01, 50 CTL_PORT_STATUS_HA_SHARED = 0x02 51} ctl_port_status; 52 53typedef int (*fe_init_t)(void); 54typedef int (*fe_shutdown_t)(void); 55typedef void (*port_func_t)(void *onoff_arg); 56typedef int (*port_info_func_t)(void *onoff_arg, struct sbuf *sb); 57typedef int (*lun_func_t)(void *arg, int lun_id); 58typedef int (*fe_ioctl_t)(struct cdev *dev, u_long cmd, caddr_t addr, int flag, 59 struct thread *td); 60 61#define CTL_FRONTEND_DECLARE(name, driver) \ 62 static int name ## _modevent(module_t mod, int type, void *data) \ 63 { \ 64 switch (type) { \ 65 case MOD_LOAD: \ 66 return (ctl_frontend_register( \ 67 (struct ctl_frontend *)data)); \ 68 break; \ 69 case MOD_UNLOAD: \ 70 return (ctl_frontend_deregister( \ 71 (struct ctl_frontend *)data)); \ 72 break; \ 73 default: \ 74 return EOPNOTSUPP; \ 75 } \ 76 return 0; \ 77 } \ 78 static moduledata_t name ## _mod = { \ 79 #name, \ 80 name ## _modevent, \ 81 (void *)&driver \ 82 }; \ 83 DECLARE_MODULE(name, name ## _mod, SI_SUB_CONFIGURE, SI_ORDER_FOURTH); \ 84 MODULE_DEPEND(name, ctl, 1, 1, 1); \ 85 MODULE_DEPEND(name, cam, 1, 1, 1) 86 87struct ctl_wwpn_iid { 88 int in_use; 89 time_t last_use; 90 uint64_t wwpn; 91 char *name; 92}; 93 94/* 95 * The ctl_frontend structure is the registration mechanism between a FETD 96 * (Front End Target Driver) and the CTL layer. Here is a description of 97 * the fields: 98 * 99 * port_type: This field tells CTL what kind of front end it is 100 * dealing with. This field serves two purposes. 101 * The first is to let CTL know whether the frontend 102 * in question is inside the main CTL module (i.e. 103 * the ioctl front end), and therefore its module 104 * reference count shouldn't be incremented. The 105 * CTL ioctl front end should continue to use the 106 * CTL_PORT_IOCTL argument as long as it is part of 107 * the main CTL module. The second is to let CTL 108 * know what kind of front end it is dealing with, so 109 * it can return the proper inquiry data for that 110 * particular port. 111 * 112 * num_requested_ctl_io: This is the number of ctl_io structures that the 113 * front end needs for its pool. This should 114 * generally be the maximum number of outstanding 115 * transactions that the FETD can handle. The CTL 116 * layer will add a few to this to account for 117 * ctl_io buffers queued for pending sense data. 118 * (Pending sense only gets queued if the FETD 119 * doesn't support autosense. e.g. non-packetized 120 * parallel SCSI doesn't support autosense.) 121 * 122 * port_name: A string describing the FETD. e.g. "LSI 1030T U320" 123 * or whatever you want to use to describe the driver. 124 * 125 * physical_port: This is the physical port number of this 126 * particular port within the driver/hardware. This 127 * number is hardware/driver specific. 128 * virtual_port: This is the virtual port number of this 129 * particular port. This is for things like NP-IV. 130 * 131 * port_online(): This function is called, with onoff_arg as its 132 * argument, by the CTL layer when it wants the FETD 133 * to start responding to selections on the specified 134 * target ID. 135 * 136 * port_offline(): This function is called, with onoff_arg as its 137 * argument, by the CTL layer when it wants the FETD 138 * to stop responding to selection on the specified 139 * target ID. 140 * 141 * onoff_arg: This is supplied as an argument to port_online() 142 * and port_offline(). This is specified by the 143 * FETD. 144 * 145 * lun_enable(): This function is called, with targ_lun_arg, a target 146 * ID and a LUN ID as its arguments, by CTL when it 147 * wants the FETD to enable a particular LUN. If the 148 * FETD doesn't really know about LUNs, it should 149 * just ignore this call and return 0. If the FETD 150 * cannot enable the requested LUN for some reason, the 151 * FETD should return non-zero status. 152 * 153 * lun_disable(): This function is called, with targ_lun_arg, a target 154 * ID and LUN ID as its arguments, by CTL when it 155 * wants the FETD to disable a particular LUN. If the 156 * FETD doesn't really know about LUNs, it should just 157 * ignore this call and return 0. If the FETD cannot 158 * disable the requested LUN for some reason, the 159 * FETD should return non-zero status. 160 * 161 * targ_lun_arg: This is supplied as an argument to the targ/lun 162 * enable/disable() functions. This is specified by 163 * the FETD. 164 * 165 * fe_datamove(): This function is called one or more times per I/O 166 * by the CTL layer to tell the FETD to initiate a 167 * DMA to or from the data buffer(s) specified by 168 * the passed-in ctl_io structure. 169 * 170 * fe_done(): This function is called by the CTL layer when a 171 * particular SCSI I/O or task management command has 172 * completed. For SCSI I/O requests (CTL_IO_SCSI), 173 * sense data is always supplied if the status is 174 * CTL_SCSI_ERROR and the SCSI status byte is 175 * SCSI_STATUS_CHECK_COND. If the FETD doesn't 176 * support autosense, the sense should be queued 177 * back to the CTL layer via ctl_queue_sense(). 178 * 179 * fe_dump(): This function, if it exists, is called by CTL 180 * to request a dump of any debugging information or 181 * state to the console. 182 * 183 * targ_port: The CTL layer assigns a "port number" to every 184 * FETD. This port number should be passed back in 185 * in the header of every ctl_io that is queued to 186 * the CTL layer. This enables us to determine 187 * which bus the command came in on. 188 * 189 * ctl_pool_ref: Memory pool reference used by the FETD in calls to 190 * ctl_alloc_io(). 191 * 192 * max_initiators: Maximum number of initiators that the FETD is 193 * allowed to have. Initiators should be numbered 194 * from 0 to max_initiators - 1. This value will 195 * typically be 16, and thus not a problem for 196 * parallel SCSI. This may present issues for Fibre 197 * Channel. 198 * 199 * wwnn World Wide Node Name to be used by the FETD. 200 * Note that this is set *after* registration. It 201 * will be set prior to the online function getting 202 * called. 203 * 204 * wwpn World Wide Port Name to be used by the FETD. 205 * Note that this is set *after* registration. It 206 * will be set prior to the online function getting 207 * called. 208 * 209 * status: Used by CTL to keep track of per-FETD state. 210 * 211 * links: Linked list pointers, used by CTL. The FETD 212 * shouldn't touch this field. 213 */ 214struct ctl_port { 215 struct ctl_softc *ctl_softc; 216 struct ctl_frontend *frontend; /* passed to CTL */ 217 ctl_port_type port_type; /* passed to CTL */ 218 int num_requested_ctl_io; /* passed to CTL */ 219 char *port_name; /* passed to CTL */ 220 int physical_port; /* passed to CTL */ 221 int virtual_port; /* passed to CTL */ 222 port_func_t port_online; /* passed to CTL */ 223 port_func_t port_offline; /* passed to CTL */ 224 port_info_func_t port_info; /* passed to CTL */ 225 void *onoff_arg; /* passed to CTL */ 226 lun_func_t lun_enable; /* passed to CTL */ 227 lun_func_t lun_disable; /* passed to CTL */ 228 int lun_map_size; /* passed to CTL */ 229 uint32_t *lun_map; /* passed to CTL */ 230 void *targ_lun_arg; /* passed to CTL */ 231 void (*fe_datamove)(union ctl_io *io); /* passed to CTL */ 232 void (*fe_done)(union ctl_io *io); /* passed to CTL */ 233 int32_t targ_port; /* passed back to FETD */ 234 void *ctl_pool_ref; /* passed back to FETD */ 235 uint32_t max_initiators; /* passed back to FETD */ 236 struct ctl_wwpn_iid *wwpn_iid; /* used by CTL */ 237 uint64_t wwnn; /* set by CTL before online */ 238 uint64_t wwpn; /* set by CTL before online */ 239 ctl_port_status status; /* used by CTL */ 240 nvlist_t *options; /* passed to CTL */ 241 struct ctl_devid *port_devid; /* passed to CTL */ 242 struct ctl_devid *target_devid; /* passed to CTL */ 243 struct ctl_devid *init_devid; /* passed to CTL */ 244 struct ctl_io_stats stats; /* used by CTL */ 245 struct mtx port_lock; /* used by CTL */ 246 STAILQ_ENTRY(ctl_port) fe_links; /* used by CTL */ 247 STAILQ_ENTRY(ctl_port) links; /* used by CTL */ 248}; 249 250struct ctl_frontend { 251 char name[CTL_DRIVER_NAME_LEN]; /* passed to CTL */ 252 fe_init_t init; /* passed to CTL */ 253 fe_ioctl_t ioctl; /* passed to CTL */ 254 void (*fe_dump)(void); /* passed to CTL */ 255 fe_shutdown_t shutdown; /* passed to CTL */ 256 STAILQ_HEAD(, ctl_port) port_list; /* used by CTL */ 257 STAILQ_ENTRY(ctl_frontend) links; /* used by CTL */ 258}; 259 260/* 261 * This may block until resources are allocated. Called at FETD module load 262 * time. Returns 0 for success, non-zero for failure. 263 */ 264int ctl_frontend_register(struct ctl_frontend *fe); 265 266/* 267 * Called at FETD module unload time. 268 * Returns 0 for success, non-zero for failure. 269 */ 270int ctl_frontend_deregister(struct ctl_frontend *fe); 271 272/* 273 * Find the frontend by its name. Returns NULL if not found. 274 */ 275struct ctl_frontend * ctl_frontend_find(char *frontend_name); 276 277/* 278 * This may block until resources are allocated. Called at FETD module load 279 * time. Returns 0 for success, non-zero for failure. 280 */ 281int ctl_port_register(struct ctl_port *port); 282 283/* 284 * Called at FETD module unload time. 285 * Returns 0 for success, non-zero for failure. 286 */ 287int ctl_port_deregister(struct ctl_port *port); 288 289/* 290 * Called to set the WWNN and WWPN for a particular frontend. 291 */ 292void ctl_port_set_wwns(struct ctl_port *port, int wwnn_valid, 293 uint64_t wwnn, int wwpn_valid, uint64_t wwpn); 294 295/* 296 * Called to bring a particular frontend online. 297 */ 298void ctl_port_online(struct ctl_port *fe); 299 300/* 301 * Called to take a particular frontend offline. 302 */ 303void ctl_port_offline(struct ctl_port *fe); 304 305/* 306 * This routine queues I/O and task management requests from the FETD to the 307 * CTL layer. Returns immediately. Returns 0 for success, non-zero for 308 * failure. 309 */ 310int ctl_queue(union ctl_io *io); 311 312/* 313 * This routine starts execution of I/O and task management requests from 314 * the FETD to the CTL layer. May sleep. Returns 0 for success, non-zero 315 * for failure. 316 */ 317int ctl_run(union ctl_io *io); 318 319/* 320 * This routine is used if the front end interface doesn't support 321 * autosense (e.g. non-packetized parallel SCSI). This will queue the 322 * scsiio structure back to a per-lun pending sense queue. This MUST be 323 * called BEFORE any request sense can get queued to the CTL layer -- I 324 * need it in the queue in order to service the request. The scsiio 325 * structure passed in here will be freed by the CTL layer when sense is 326 * retrieved by the initiator. Returns 0 for success, non-zero for failure. 327 */ 328int ctl_queue_sense(union ctl_io *io); 329 330/* 331 * This routine adds an initiator to CTL's port database. 332 * The iid field should be the same as the iid passed in the nexus of each 333 * ctl_io from this initiator. 334 * The WWPN should be the FC WWPN, if available. 335 */ 336int ctl_add_initiator(struct ctl_port *port, int iid, uint64_t wwpn, char *name); 337 338/* 339 * This routine will remove an initiator from CTL's port database. 340 * The iid field should be the same as the iid passed in the nexus of each 341 * ctl_io from this initiator. 342 */ 343int ctl_remove_initiator(struct ctl_port *port, int iid); 344 345#endif /* _CTL_FRONTEND_H_ */ 346