1#!/bin/sh 2 3# This is rc.conf - a file full of useful variables that you can set 4# to change the default startup behavior of your system. You should 5# not edit this file! Put any overrides into one of the ${rc_conf_files} 6# instead and you will be able to update these defaults later without 7# spamming your local configuration information. 8# 9# The ${rc_conf_files} files should only contain values which override 10# values set in this file. This eases the upgrade path when defaults 11# are changed and new features are added. 12# 13# All arguments must be in double or single quotes. 14# 15# For a more detailed explanation of all the rc.conf variables, please 16# refer to the rc.conf(5) manual page. 17# 18 19############################################################## 20### Important initial Boot-time options #################### 21############################################################## 22 23# Set default value of _localbase if not previously set 24: ${_localbase:="/usr/local"} 25 26# rc_debug can't be set here without interferring with rc.subr's setting it 27# when the kenv variable rc.debug is set. 28#rc_debug="NO" # Set to YES to enable debugging output from rc.d 29rc_info="NO" # Enables display of informational messages at boot. 30rc_startmsgs="YES" # Show "Starting foo:" messages at boot 31rcshutdown_timeout="90" # Seconds to wait before terminating rc.shutdown 32early_late_divider="FILESYSTEMS" # Script that separates early/late 33 # stages of the boot process. Make sure you know 34 # the ramifications if you change this. 35 # See rc.conf(5) for more details. 36always_force_depends="NO" # Set to check that indicated dependencies are 37 # running during boot (can increase boot time). 38 39apm_enable="NO" # Set to YES to enable APM BIOS functions (or NO). 40apmd_enable="NO" # Run apmd to handle APM event from userland. 41apmd_flags="" # Flags to apmd (if enabled). 42ddb_enable="NO" # Set to YES to load ddb scripts at boot. 43ddb_config="/etc/ddb.conf" # ddb(8) config file. 44devd_enable="YES" # Run devd, to trigger programs on device tree changes. 45devd_flags="" # Additional flags for devd(8). 46devmatch_enable="YES" # Demand load kernel modules based on device ids. 47devmatch_blocklist="" # List of modules (w/o .ko) to exclude from devmatch. 48#kld_list="" # Kernel modules to load after local disks are mounted 49kldxref_enable="YES" # Build linker.hints files with kldxref(8). 50kldxref_clobber="NO" # Overwrite old linker.hints at boot. 51kldxref_module_path="" # Override kern.module_path. A ';'-delimited list. 52powerd_enable="NO" # Run powerd to lower our power usage. 53powerd_flags="" # Flags to powerd (if enabled). 54tmpmfs="AUTO" # Set to YES to always create an mfs /tmp, NO to never 55tmpsize="20m" # Size of mfs /tmp if created 56tmpmfs_flags="-S" # Extra mdmfs options for the mfs /tmp 57utx_enable="YES" # Enable user accounting 58varmfs="AUTO" # Set to YES to always create an mfs /var, NO to never 59varsize="32m" # Size of mfs /var if created 60varmfs_flags="-S" # Extra mount options for the mfs /var 61mfs_type="auto" # "md", "tmpfs", "auto" to prefer tmpfs with md as fallback 62populate_var="AUTO" # Set to YES to always (re)populate /var, NO to never 63cleanvar_enable="YES" # Clean the /var directory 64var_run_enable="YES" # Save/restore /var/run structure at shutdown/reboot 65var_run_autosave="YES" # Only restore /var/run structure at shutdown/reboot 66 # The user is expected to issue service var_run save to 67 # manually save the /var/run mtree 68var_run_mtree="/var/db/mtree/BSD.var-run.mtree" 69 # Where to save /var/run mtree 70local_startup="${_localbase}/etc/rc.d" # startup script dirs. 71script_name_sep=" " # Change if your startup scripts' names contain spaces 72rc_conf_files="/etc/rc.conf /etc/rc.conf.local" 73 74# ZFS support 75zfs_enable="NO" # Set to YES to automatically mount ZFS file systems 76zfskeys_enable="NO" # Set YES to autoload ZFS encryption keys 77zfs_bootonce_activate="NO" # Set YES to make successful bootonce BE permanent 78zpool_reguid="" # Set to zpools for which the GUID should be replaced 79 # upon first boot. 80zpool_upgrade="" # Set to zpools for which the version should be upgraded 81 # upon first boot. 82 83# ZFSD support 84zfsd_enable="NO" # Set to YES to automatically start the ZFS fault 85 # management daemon. 86 87gptboot_enable="YES" # GPT boot success/failure reporting. 88 89# GELI disk encryption configuration. 90geli_devices="" # List of devices to automatically attach in addition to 91 # GELI devices listed in /etc/fstab. 92geli_groups="" # List of groups containing devices to automatically 93 # attach with the same keyfiles and passphrase 94geli_tries="" # Number of times to attempt attaching geli device. 95 # If empty, kern.geom.eli.tries will be used. 96geli_default_flags="" # Default flags for geli(8). 97geli_autodetach="YES" # Automatically detach on last close. 98 # Providers are marked as such when all file systems are 99 # mounted. 100# Example use. 101#geli_devices="da1 mirror/home" 102#geli_da1_flags="-p -k /etc/geli/da1.keys" 103#geli_da1_autodetach="NO" 104#geli_mirror_home_flags="-k /etc/geli/home.keys" 105#geli_groups="storage backup" 106#geli_storage_flags="-k /etc/geli/storage.keys" 107#geli_storage_devices="ada0 ada1" 108#geli_backup_flags="-j /etc/geli/backup.passfile -k /etc/geli/backup.keys" 109#geli_backup_devices="ada2 ada3" 110 111root_rw_mount="YES" # Set to NO to inhibit remounting root read-write. 112root_hold_delay="30" # Time to wait for root mount hold release. 113fsck_flags="-p" # May be changed to -f (or -f -y) to force a full fsck 114fsck_y_enable="NO" # Set to YES to do fsck -y if the initial preen fails. 115fsck_y_flags="-T ffs:-R -T ufs:-R" # Additional flags for fsck -y 116background_fsck="YES" # Attempt to run fsck in the background where possible. 117background_fsck_delay="60" # Time to wait (seconds) before starting the fsck. 118growfs_enable="NO" # Set to YES to attempt to grow the root filesystem on boot 119growfs_swap_size="" # Set to 0 to disable growfs swap, "" to default size, 120 # size in bytes to specify swap size. 121netfs_types="nfs:NFS smbfs:SMB" # Net filesystems. 122extra_netfs_types="NO" # List of network extra filesystem types for delayed 123 # mount at startup (or NO). 124 125############################################################## 126### Network configuration sub-section ###################### 127############################################################## 128 129### Basic network and firewall/security options: ### 130hostname="" # Set this! 131hostid_enable="YES" # Set host UUID. 132hostid_file="/etc/hostid" # File with hostuuid. 133hostid_uuidgen_flags="-r" # Flags to uuidgen. 134machine_id_file="/etc/machine-id" # File with machine-id. 135nisdomainname="NO" # Set to NIS domain if using NIS (or NO). 136dhclient_program="/sbin/dhclient" # Path to dhcp client program. 137dhclient_flags="" # Extra flags to pass to dhcp client. 138#dhclient_flags_em0="" # Extra dhclient flags for em0 only 139background_dhclient="NO" # Start dhcp client in the background. 140#background_dhclient_em0="YES" # Start dhcp client on em0 in the background. 141synchronous_dhclient="NO" # Start dhclient directly on configured 142 # interfaces during startup. 143defaultroute_delay="30" # Time to wait for a default route on a DHCP interface. 144defaultroute_carrier_delay="5" # Time to wait for carrier while waiting for a default route. 145netif_enable="YES" # Set to YES to initialize network interfaces 146netif_ipexpand_max="2048" # Maximum number of IP addrs in a range spec. 147wpa_supplicant_program="/usr/sbin/wpa_supplicant" 148wpa_supplicant_flags="-s" # Extra flags to pass to wpa_supplicant 149wpa_supplicant_conf_file="/etc/wpa_supplicant.conf" 150# 151firewall_enable="NO" # Set to YES to enable firewall functionality 152firewall_script="/etc/rc.firewall" # Which script to run to set up the firewall 153firewall_type="UNKNOWN" # Firewall type (see /etc/rc.firewall) 154firewall_quiet="NO" # Set to YES to suppress rule display 155firewall_logging="NO" # Set to YES to enable events logging 156firewall_logif="NO" # Set to YES to create logging-pseudo interface 157firewall_flags="" # Flags passed to ipfw when type is a file 158firewall_coscripts="" # List of executables/scripts to run after 159 # firewall starts/stops 160firewall_client_net="192.0.2.0/24" # IPv4 Network address for "client" 161 # firewall. 162#firewall_client_net_ipv6="2001:db8:2:1::/64" # IPv6 network prefix for 163 # "client" firewall. 164firewall_simple_iif="em1" # Inside network interface for "simple" 165 # firewall. 166firewall_simple_inet="192.0.2.16/28" # Inside network address for "simple" 167 # firewall. 168firewall_simple_oif="em0" # Outside network interface for "simple" 169 # firewall. 170firewall_simple_onet="192.0.2.0/28" # Outside network address for "simple" 171 # firewall. 172#firewall_simple_iif_ipv6="em1" # Inside IPv6 network interface for "simple" 173 # firewall. 174#firewall_simple_inet_ipv6="2001:db8:2:800::/56" # Inside IPv6 network prefix 175 # for "simple" firewall. 176#firewall_simple_oif_ipv6="em0" # Outside IPv6 network interface for "simple" 177 # firewall. 178#firewall_simple_onet_ipv6="2001:db8:2:0::/56" # Outside IPv6 network prefix 179 # for "simple" firewall. 180firewall_myservices="" # List of ports/protocols on which this host 181 # offers services for "workstation" firewall. 182firewall_allowservices="" # List of IPs which have access to 183 # $firewall_myservices for "workstation" 184 # firewall. 185firewall_trusted="" # List of IPs which have full access to this 186 # host for "workstation" firewall. 187firewall_logdeny="NO" # Set to YES to log default denied incoming 188 # packets for "workstation" firewall. 189firewall_nologports="135-139,445 1026,1027 1433,1434" # List of TCP/UDP ports 190 # for which denied incoming packets are not 191 # logged for "workstation" firewall. 192firewall_nat_enable="NO" # Enable kernel NAT (if firewall_enable == YES) 193firewall_nat_interface="" # Public interface or IPaddress to use 194firewall_nat_flags="" # Additional configuration parameters 195firewall_nat64_enable="NO" # Enable kernel NAT64 module. 196firewall_nptv6_enable="NO" # Enable kernel NPTv6 module. 197firewall_pmod_enable="NO" # Enable kernel protocols modification module. 198dummynet_enable="NO" # Load the dummynet(4) module 199ipfw_netflow_enable="NO" # Enable netflow logging via ng_netflow 200ip_portrange_first="NO" # Set first dynamically allocated port 201ip_portrange_last="NO" # Set last dynamically allocated port 202ike_enable="NO" # Enable IKE daemon (usually racoon or isakmpd) 203ike_program="${_localbase}/sbin/isakmpd" # Path to IKE daemon 204ike_flags="" # Additional flags for IKE daemon 205ipsec_enable="NO" # Set to YES to run setkey on ipsec_file 206ipsec_file="/etc/ipsec.conf" # Name of config file for setkey 207natd_program="/sbin/natd" # path to natd, if you want a different one. 208natd_enable="NO" # Enable natd (if firewall_enable == YES). 209natd_interface="" # Public interface or IPaddress to use. 210natd_flags="" # Additional flags for natd. 211ipfilter_enable="NO" # Set to YES to enable ipfilter functionality 212ipfilter_program="/sbin/ipf" # where the ipfilter program lives 213ipfilter_rules="/etc/ipf.rules" # rules definition file for ipfilter, see 214 # /usr/src/contrib/ipfilter/rules for examples 215ipfilter_flags="" # additional flags for ipfilter 216ippool_enable="NO" # Set to YES to enable ip filter pools 217ippool_program="/sbin/ippool" # where the ippool program lives 218ippool_rules="/etc/ippool.tables" # rules definition file for ippool 219ippool_flags="" # additional flags for ippool 220ipnat_enable="NO" # Set to YES to enable ipnat functionality 221ipnat_program="/sbin/ipnat" # where the ipnat program lives 222ipnat_rules="/etc/ipnat.rules" # rules definition file for ipnat 223ipnat_flags="" # additional flags for ipnat 224ipmon_enable="NO" # Set to YES for ipmon; needs ipfilter or ipnat 225ipmon_program="/sbin/ipmon" # where the ipfilter monitor program lives 226ipmon_flags="-Ds" # typically "-Ds" or "-D /var/log/ipflog" 227ipfs_enable="NO" # Set to YES to enable saving and restoring 228 # of state tables at shutdown and boot 229ipfs_program="/sbin/ipfs" # where the ipfs program lives 230ipfs_flags="" # additional flags for ipfs 231pf_enable="NO" # Set to YES to enable packet filter (pf) 232pf_rules="/etc/pf.conf" # rules definition file for pf (nonexistent 233 # by default) 234pf_program="/sbin/pfctl" # where the pfctl program lives 235pf_flags="" # additional flags for pfctl 236pf_fallback_rules_enable="NO" # fallback if loading ruleset fails 237pf_fallback_rules="block drop log all" # rules to load on pf ruleset failure 238#pf_fallback_rules="block drop log all 239#pass quick on em4" # multi-rule 240pf_fallback_rules_file="/etc/pf-fallback.conf" # rules file on ruleset failure 241pflog_enable="NO" # Set to YES to enable packet filter logging 242pflog_logfile="/var/log/pflog" # where pflogd should store the logfile 243pflog_program="/sbin/pflogd" # where the pflogd program lives 244pflog_flags="" # additional flags for pflogd 245dnctl_enable="NO" 246dnctl_program="/sbin/dnctl" 247dnctl_rules="/etc/dnctl.conf" 248ftpproxy_enable="NO" # Set to YES to enable ftp-proxy(8) for pf 249ftpproxy_flags="" # additional flags for ftp-proxy(8) 250pfsync_enable="NO" # Expose pf state to other hosts for syncing 251pfsync_syncdev="" # Interface for pfsync to work through 252pfsync_syncpeer="" # IP address of pfsync peer host 253pfsync_ifconfig="" # Additional options to ifconfig(8) for pfsync 254tcp_extensions="YES" # Set to NO to turn off RFC1323 extensions. 255log_in_vain="0" # >=1 to log connects to ports w/o listeners. 256tcp_keepalive="YES" # Enable stale TCP connection timeout (or NO). 257tcp_drop_synfin="NO" # Set to YES to drop TCP packets with SYN+FIN 258 # NOTE: this violates the TCP specification 259icmp_drop_redirect="auto" # Set to YES to ignore ICMP REDIRECT packets 260icmp_log_redirect="NO" # Set to YES to log ICMP REDIRECT packets 261network_interfaces="auto" # List of network interfaces (or "auto"). 262cloned_interfaces="" # List of cloned network interfaces to create. 263#cloned_interfaces="gif0 gif1 gif2 gif3" # Pre-cloning GENERIC config. 264#ifconfig_lo0="inet 127.0.0.1" # default loopback device configuration. 265#ifconfig_lo0_alias0="inet 127.0.0.254 netmask 0xffffffff" # Sample alias entry. 266#ifconfig_em0_ipv6="inet6 2001:db8:1::1 prefixlen 64" # Sample IPv6 addr entry 267#ifconfig_em0_alias0="inet6 2001:db8:2::1 prefixlen 64" # Sample IPv6 alias 268#ifconfig_em0_name="net0" # Change interface name from em0 to net0. 269#vlans_em0="101 vlan0" # vlan(4) interfaces for em0 device 270#create_args_vlan0="vlan 102" # vlan tag for vlan0 device 271#wlans_ath0="wlan0" # wlan(4) interfaces for ath0 device 272#wlandebug_wlan0="scan+auth+assoc" # Set debug flags with wlandebug(8) 273#ipv4_addrs_em0="192.168.0.1/24 192.168.1.1-5/28" # example IPv4 address entry. 274# 275#autobridge_interfaces="bridge0" # List of bridges to check 276#autobridge_bridge0="tap* vlan0" # Interface glob to automatically add to the bridge 277 278# User ppp configuration. 279ppp_enable="NO" # Start user-ppp (or NO). 280ppp_program="/usr/sbin/ppp" # Path to user-ppp program. 281ppp_mode="auto" # Choice of "auto", "ddial", "direct" or "dedicated". 282 # For details see man page for ppp(8). Default is auto. 283ppp_nat="YES" # Use PPP's internal network address translation or NO. 284ppp_profile="papchap" # Which profile to use from /etc/ppp/ppp.conf. 285ppp_user="root" # Which user to run ppp as 286 287# Start multiple instances of ppp at boot time 288#ppp_profile="profile1 profile2 profile3" # Which profiles to use 289#ppp_profile1_mode="ddial" # Override ppp mode for profile1 290#ppp_profile2_nat="NO" # Override nat mode for profile2 291# profile3 uses default ppp_mode and ppp_nat 292 293### Network daemon (miscellaneous) ### 294hostapd_program="/usr/sbin/hostapd" 295hostapd_enable="NO" # Run hostap daemon. 296syslogd_enable="YES" # Run syslog daemon (or NO). 297syslogd_program="/usr/sbin/syslogd" # path to syslogd, if you want a different one. 298syslogd_flags="-s" # Flags to syslogd (if enabled). 299syslogd_oomprotect="YES" # Don't kill syslogd when swap space is exhausted. 300altlog_proglist="" # List of chrooted applicatioins in /var 301inetd_enable="NO" # Run the network daemon dispatcher (YES/NO). 302inetd_program="/usr/sbin/inetd" # path to inetd, if you want a different one. 303inetd_flags="-wW -C 60" # Optional flags to inetd 304iscsid_enable="NO" # iSCSI initiator daemon. 305iscsictl_enable="NO" # iSCSI initiator autostart. 306iscsictl_flags="-Aa" # Optional flags to iscsictl. 307hastd_enable="NO" # Run the HAST daemon (YES/NO). 308hastd_program="/sbin/hastd" # path to hastd, if you want a different one. 309hastd_flags="" # Optional flags to hastd. 310ggated_enable="NO" # Run the ggate daemon (YES/NO). 311ggated_config="/etc/gg.exports" # ggated(8) exports file. 312ggated_flags="" # Extra parameters like which port to bind to. 313ctld_enable="NO" # CAM Target Layer / iSCSI target daemon. 314local_unbound_enable="NO" # Local caching DNS resolver 315local_unbound_oomprotect="YES" # Don't kill local_unbound when swap space is exhausted. 316local_unbound_tls="NO" # Use DNS over TLS 317blacklistd_enable="NO" # Run blacklistd daemon (YES/NO). 318blacklistd_flags="" # Optional flags for blacklistd(8). 319resolv_enable="YES" # Enable resolv / resolvconf 320 321# 322# kerberos. Do not run the admin daemons on slave servers 323# 324kdc_enable="NO" # Run a kerberos 5 KDC (or NO). 325kdc_program="/usr/libexec/kdc" # path to kerberos 5 KDC 326kdc_flags="" # Additional flags to the kerberos 5 KDC 327kdc_restart="NO" # Auto restart kdc on abnormal termination 328kdc_restart_delay="" # Auto restart delay seconds 329kadmind_enable="NO" # Run kadmind (or NO) 330kadmind_program="/usr/libexec/kadmind" # path to kadmind 331kpasswdd_enable="NO" # Run kpasswdd (or NO) 332kpasswdd_program="/usr/libexec/kpasswdd" # path to kpasswdd 333kfd_enable="NO" # Run kfd (or NO) 334kfd_program="/usr/libexec/kfd" # path to kerberos 5 kfd daemon 335kfd_flags="" 336ipropd_master_enable="NO" # Run Heimdal incremental propagation daemon 337 # (master daemon). 338ipropd_master_program="/usr/libexec/ipropd-master" 339ipropd_master_flags="" # Flags to ipropd-master. 340ipropd_master_keytab="/etc/krb5.keytab" # keytab for ipropd-master. 341ipropd_master_slaves="" # slave node names used for /var/heimdal/slaves. 342ipropd_slave_enable="NO" # Run Heimdal incremental propagation daemon 343 # (slave daemon). 344ipropd_slave_program="/usr/libexec/ipropd-slave" 345ipropd_slave_flags="" # Flags to ipropd-slave. 346ipropd_slave_keytab="/etc/krb5.keytab" # keytab for ipropd-slave. 347ipropd_slave_master="" # master node name. 348 349gssd_enable="NO" # Run the gssd daemon (or NO). 350gssd_program="/usr/sbin/gssd" # Path to gssd. 351gssd_flags="" # Flags for gssd. 352 353rwhod_enable="NO" # Run the rwho daemon (or NO). 354rwhod_flags="" # Flags for rwhod 355rarpd_enable="NO" # Run rarpd (or NO). 356rarpd_flags="-a" # Flags to rarpd. 357bootparamd_enable="NO" # Run bootparamd (or NO). 358bootparamd_flags="" # Flags to bootparamd 359pppoed_enable="NO" # Run the PPP over Ethernet daemon. 360pppoed_provider="*" # Provider and ppp(8) config file entry. 361pppoed_flags="-P /var/run/pppoed.pid" # Flags to pppoed (if enabled). 362pppoed_interface="em0" # The interface that pppoed runs on. 363sshd_enable="NO" # Enable sshd 364sshd_oomprotect="YES" # Don't kill sshd when swap space is exhausted. 365sshd_program="/usr/sbin/sshd" # path to sshd, if you want a different one. 366sshd_flags="" # Additional flags for sshd. 367ftpd_enable="NO" # Enable stand-alone ftpd. 368ftpd_program="/usr/libexec/ftpd" # Path to ftpd, if you want a different one. 369ftpd_flags="" # Additional flags to stand-alone ftpd. 370 371### Network daemon (NFS): All need rpcbind_enable="YES" ### 372autofs_enable="NO" # Run autofs daemons. 373automount_flags="" # Flags to automount(8) (if autofs enabled). 374automountd_flags="" # Flags to automountd(8) (if autofs enabled). 375autounmountd_flags="" # Flags to autounmountd(8) (if autofs enabled). 376nfs_client_enable="NO" # This host is an NFS client (or NO). 377nfs_access_cache="60" # Client cache timeout in seconds 378nfs_server_enable="NO" # This host is an NFS server (or NO). 379nfs_server_flags="-u -t" # Flags to nfsd (if enabled). 380nfs_server_managegids="NO" # The NFS server maps gids for AUTH_SYS (or NO). 381nfs_server_maxio="131072" # Maximum I/O size for the nfsd. 382mountd_enable="NO" # Run mountd (or NO). 383mountd_flags="-r -S" # Flags to mountd (if NFS server enabled). 384weak_mountd_authentication="NO" # Allow non-root mount requests to be served. 385nfs_reserved_port_only="YES" # Provide NFS only on secure port (or NO). 386nfs_bufpackets="" # bufspace (in packets) for client 387rpc_lockd_enable="NO" # Run NFS rpc.lockd needed for client/server. 388rpc_lockd_flags="" # Flags to rpc.lockd (if enabled). 389rpc_statd_enable="NO" # Run NFS rpc.statd needed for client/server. 390rpc_statd_flags="" # Flags to rpc.statd (if enabled). 391rpcbind_enable="NO" # Run the portmapper service (YES/NO). 392rpcbind_program="/usr/sbin/rpcbind" # path to rpcbind, if you want a different one. 393rpcbind_flags="" # Flags to rpcbind (if enabled). 394rpc_ypupdated_enable="NO" # Run if NIS master and SecureRPC (or NO). 395keyserv_enable="NO" # Run the SecureRPC keyserver (or NO). 396keyserv_flags="" # Flags to keyserv (if enabled). 397nfsv4_server_enable="NO" # Enable support for NFSv4 398nfsv4_server_only="NO" # Set NFS server to NFSv4 only 399nfscbd_enable="NO" # NFSv4 client side callback daemon 400nfscbd_flags="" # Flags for nfscbd 401nfsuserd_enable="NO" # NFSv4 user/group name mapping daemon 402nfsuserd_flags="" # Flags for nfsuserd 403tlsclntd_enable="NO" # Run rpc.tlsclntd needed for NFS-over-TLS mount 404tlsclntd_flags="" # Flags for rpc.tlsclntd 405tlsservd_enable="NO" # Run rpc.tlsservd needed for NFS-over-TLS nfsd 406tlsservd_flags="" # Flags for rpc.tlsservd 407 408### Network Time Services options: ### 409ntpdate_enable="NO" # Run ntpdate to sync time on boot (or NO). 410ntpdate_program="/usr/sbin/ntpdate" # path to ntpdate, if you want a different one. 411ntpdate_flags="-b" # Flags to ntpdate (if enabled). 412ntpdate_config="/etc/ntp.conf" # ntpdate(8) configuration file 413ntpdate_hosts="" # Whitespace-separated list of ntpdate(8) servers. 414ntpd_enable="NO" # Run ntpd Network Time Protocol (or NO). 415ntpd_program="/usr/sbin/ntpd" # path to ntpd, if you want a different one. 416ntpd_config="/etc/ntp.conf" # ntpd(8) configuration file 417ntpd_sync_on_start="NO" # Sync time on ntpd startup, even if offset is high 418ntpd_flags="" # Additional flags to ntpd 419ntp_src_leapfile="/etc/ntp/leap-seconds" 420 # Initial source for ntpd leapfile 421ntp_db_leapfile="/var/db/ntpd.leap-seconds.list" 422 # Canonical place to get the leap seconds from 423ntp_leapfile_sources="https://hpiers.obspm.fr/iers/bul/bulc/ntp/leap-seconds.list" 424 # Source from which to fetch leapfile 425ntp_leapfile_fetch_opts="-mq" # Options to use for ntp leapfile fetch, 426 # e.g. --no-verify-peer 427ntp_leapfile_expiry_days=30 # Check for new leapfile 30 days prior to 428 # expiry. 429ntp_leapfile_fetch_verbose="NO" # Be verbose during NTP leapfile fetch 430 431# Network Information Services (NIS) options: All need rpcbind_enable="YES" ### 432nis_client_enable="NO" # We're an NIS client (or NO). 433nis_client_flags="" # Flags to ypbind (if enabled). 434nis_ypset_enable="NO" # Run ypset at boot time (or NO). 435nis_ypset_flags="" # Flags to ypset (if enabled). 436nis_server_enable="NO" # We're an NIS server (or NO). 437nis_server_flags="" # Flags to ypserv (if enabled). 438nis_ypxfrd_enable="NO" # Run rpc.ypxfrd at boot time (or NO). 439nis_ypxfrd_flags="" # Flags to rpc.ypxfrd (if enabled). 440nis_yppasswdd_enable="NO" # Run rpc.yppasswdd at boot time (or NO). 441nis_yppasswdd_flags="" # Flags to rpc.yppasswdd (if enabled). 442nis_ypldap_enable="NO" # Run ypldap at boot time (or NO). 443nis_ypldap_flags="" # Flags to ypldap (if enabled). 444 445### SNMP daemon ### 446# Be sure to understand the security implications of running SNMP v1/v2 447# in your network. 448bsnmpd_enable="NO" # Run the SNMP daemon (or NO). 449bsnmpd_flags="" # Flags for bsnmpd. 450 451### Network routing options: ### 452defaultrouter="NO" # Set to default gateway (or NO). 453#defaultrouter_fibN="192.0.2.1" # Use this form to set a gateway for FIB N 454static_arp_pairs="" # Set to static ARP list (or leave empty). 455static_ndp_pairs="" # Set to static NDP list (or leave empty). 456static_routes="" # Set to static route list (or leave empty). 457gateway_enable="NO" # Set to YES if this host will be a gateway. 458routed_enable="NO" # Set to YES to enable a routing daemon. 459routed_program="/sbin/routed" # Name of routing daemon to use if enabled. 460routed_flags="-q" # Flags for routing daemon. 461arpproxy_all="NO" # replaces obsolete kernel option ARP_PROXYALL. 462forward_sourceroute="NO" # do source routing (only if gateway_enable is set to "YES") 463accept_sourceroute="NO" # accept source routed packets to us 464 465### Bluetooth ### 466hcsecd_enable="NO" # Enable hcsecd(8) (or NO) 467hcsecd_config="/etc/bluetooth/hcsecd.conf" # hcsecd(8) configuration file 468 469sdpd_enable="NO" # Enable sdpd(8) (or NO) 470sdpd_control="/var/run/sdp" # sdpd(8) control socket 471sdpd_groupname="nobody" # set spdp(8) user/group to run as after 472sdpd_username="nobody" # it initializes 473 474bthidd_enable="NO" # Enable bthidd(8) (or NO) 475bthidd_config="/etc/bluetooth/bthidd.conf" # bthidd(8) configuration file 476bthidd_hids="/var/db/bthidd.hids" # bthidd(8) known HID devices file 477bthidd_evdev_support="AUTO" # AUTO depends on EVDEV_SUPPORT kernel option 478 479rfcomm_pppd_server_enable="NO" # Enable rfcomm_pppd(8) in server mode (or NO) 480rfcomm_pppd_server_profile="one two" # Profile to use from /etc/ppp/ppp.conf 481# 482#rfcomm_pppd_server_one_bdaddr="" # Override local bdaddr for 'one' 483rfcomm_pppd_server_one_channel="1" # Override local channel for 'one' 484#rfcomm_pppd_server_one_register_sp="NO" # Override SP and DUN register 485#rfcomm_pppd_server_one_register_dun="NO" # for 'one' 486# 487#rfcomm_pppd_server_two_bdaddr="" # Override local bdaddr for 'two' 488rfcomm_pppd_server_two_channel="3" # Override local channel for 'two' 489#rfcomm_pppd_server_two_register_sp="NO" # Override SP and DUN register 490#rfcomm_pppd_server_two_register_dun="NO" # for 'two' 491 492ubthidhci_enable="NO" # Switch an USB BT controller present on 493#ubthidhci_busnum="3" # bus 3 and addr 2 from HID mode to HCI mode. 494#ubthidhci_addr="2" # Check usbconfig list to find the correct 495 # numbers for your system. 496 497### Network link/usability verification options 498netwait_enable="NO" # Enable rc.d/netwait (or NO) 499#netwait_ip="" # Wait for ping response from any IP in this list. 500netwait_timeout="60" # Total number of seconds to perform pings. 501#netwait_if="" # Wait for active link on each intf in this list. 502netwait_if_timeout="30" # Total number of seconds to monitor link state. 503 504### Miscellaneous network options: ### 505icmp_bmcastecho="NO" # respond to broadcast ping packets 506 507### IPv6 options: ### 508ipv6_network_interfaces="auto" # List of IPv6 network interfaces 509 # (or "auto" or "none"). 510ipv6_activate_all_interfaces="NO" # If NO, interfaces which have no 511 # corresponding $ifconfig_IF_ipv6 is 512 # marked as IFDISABLED for security 513 # reason. 514ipv6_defaultrouter="NO" # Set to IPv6 default gateway (or NO). 515#ipv6_defaultrouter="2002:c058:6301::" # Use this for 6to4 (RFC 3068) 516#ipv6_defaultrouter_fibN="2001:db8::" # Use this form to set a gateway for FIB N 517ipv6_static_routes="" # Set to static route list (or leave empty). 518#ipv6_static_routes="xxx" # An example to set fec0:0000:0000:0006::/64 519 # route toward loopback interface. 520#ipv6_route_xxx="fec0:0000:0000:0006:: -prefixlen 64 ::1" 521ipv6_gateway_enable="NO" # Set to YES if this host will be a gateway. 522ipv6_cpe_wanif="NO" # Set to the upstream interface name if this 523 # node will work as a router to forward IPv6 524 # packets not explicitly addressed to itself. 525ipv6_privacy="NO" # Use privacy address on RA-receiving IFs 526 # (RFC 4941) 527 528route6d_enable="NO" # Set to YES to enable an IPv6 routing daemon. 529route6d_program="/usr/sbin/route6d" # Name of IPv6 routing daemon. 530route6d_flags="" # Flags to IPv6 routing daemon. 531#route6d_flags="-l" # Example for route6d with only IPv6 site local 532 # addrs. 533#route6d_flags="-q" # If you want to run a routing daemon on an end 534 # node, you should stop advertisement. 535#ipv6_network_interfaces="em0 em1" # Examples for router 536 # or static configuration for end node. 537 # Choose correct prefix value. 538#ipv6_prefix_em0="fec0:0000:0000:0001 fec0:0000:0000:0002" # Examples for rtr. 539#ipv6_prefix_em1="fec0:0000:0000:0003 fec0:0000:0000:0004" # Examples for rtr. 540ipv6_default_interface="NO" # Default output interface for scoped addrs. 541 # This works only with 542 # ipv6_gateway_enable="NO". 543rtsol_flags="-i" # Flags to IPv6 router solicitation. 544rtsold_enable="NO" # Set to YES to enable an IPv6 router 545 # solicitation daemon. 546rtsold_flags="-a -i" # Flags to an IPv6 router solicitation 547 # daemon. 548rtadvd_enable="NO" # Set to YES to enable an IPv6 router 549 # advertisement daemon. If set to YES, 550 # this router becomes a possible candidate 551 # IPv6 default router for local subnets. 552rtadvd_interfaces="" # Interfaces rtadvd sends RA packets. 553stf_interface_ipv4addr="" # Local IPv4 addr for 6to4 IPv6 over IPv4 554 # tunneling interface. Specify this entry 555 # to enable 6to4 interface. 556stf_interface_ipv4plen="0" # Prefix length for 6to4 IPv4 addr, 557 # to limit peer addr range. Effective value 558 # is 0-31. 559stf_interface_ipv6_ifid="0:0:0:1" # IPv6 interface id for stf0. 560 # If you like, you can set "AUTO" for this. 561stf_interface_ipv6_slaid="0000" # IPv6 Site Level Aggregator for stf0 562ipv6_ipv4mapping="NO" # Set to "YES" to enable IPv4 mapped IPv6 addr 563 # communication. (like ::ffff:a.b.c.d) 564ip6addrctl_enable="YES" # Set to YES to enable default address selection 565ip6addrctl_verbose="NO" # Set to YES to enable verbose configuration messages 566ip6addrctl_policy="AUTO" # A pre-defined address selection policy 567 # (ipv4_prefer, ipv6_prefer, or AUTO) 568 569############################################################## 570### System console options ################################# 571############################################################## 572 573keyboard="" # keyboard device to use (default /dev/kbd0). 574keymap="NO" # keymap in /usr/share/{syscons,vt}/keymaps/* (or NO). 575keyrate="NO" # keyboard rate to: slow, normal, fast (or NO). 576keybell="NO" # See kbdcontrol(1) for options. Use "off" to disable. 577keychange="NO" # function keys default values (or NO). 578cursor="NO" # cursor type {normal|blink|destructive} (or NO). 579scrnmap="NO" # screen map in /usr/share/syscons/scrnmaps/* (or NO). 580font8x16="NO" # font 8x16 from /usr/share/{syscons,vt}/fonts/* (or NO). 581font8x14="NO" # font 8x14 from /usr/share/{syscons,vt}/fonts/* (or NO). 582font8x8="NO" # font 8x8 from /usr/share/{syscons,vt}/fonts/* (or NO). 583blanktime="300" # blank time (in seconds) or "NO" to turn it off. 584saver="NO" # screen saver: Uses /boot/kernel/${saver}_saver.ko 585moused_nondefault_enable="YES" # Treat non-default mice as enabled unless 586 # specifically overridden in rc.conf(5). 587moused_enable="NO" # Run the mouse daemon. 588moused_type="auto" # See man page for rc.conf(5) for available settings. 589moused_port="/dev/psm0" # Set to your mouse port. 590moused_flags="" # Any additional flags to moused. 591mousechar_start="NO" # if 0xd0-0xd3 default range is occupied in your 592 # language code table, specify alternative range 593 # start like mousechar_start=3, see vidcontrol(1) 594allscreens_flags="" # Set this vidcontrol mode for all virtual screens 595allscreens_kbdflags="" # Set this kbdcontrol mode for all virtual screens 596 597############################################################## 598### Mail Transfer Agent (MTA) options ###################### 599############################################################## 600 601# Settings for /etc/rc.d/sendmail: 602sendmail_enable="NONE" # Run the sendmail inbound daemon (YES/NO/NONE). 603 # If NONE, don't start any sendmail processes. 604sendmail_pidfile="/var/run/sendmail.pid" # sendmail pid file 605sendmail_procname="/usr/sbin/sendmail" # sendmail process name 606sendmail_flags="-L sm-mta -bd -q30m" # Flags to sendmail (as a server) 607sendmail_cert_create="YES" # Create a server certificate if none (YES/NO) 608#sendmail_cert_cn="CN" # CN of the generate certificate 609sendmail_submit_enable="YES" # Start a localhost-only MTA for mail submission 610sendmail_submit_flags="-L sm-mta -bd -q30m -ODaemonPortOptions=Addr=localhost" 611 # Flags for localhost-only MTA 612sendmail_outbound_enable="YES" # Dequeue stuck mail (YES/NO). 613sendmail_outbound_flags="-L sm-queue -q30m" # Flags to sendmail (outbound only) 614sendmail_msp_queue_enable="YES" # Dequeue stuck clientmqueue mail (YES/NO). 615sendmail_msp_queue_flags="-L sm-msp-queue -Ac -q30m" 616 # Flags for sendmail_msp_queue daemon. 617sendmail_rebuild_aliases="NO" # Run newaliases if necessary (YES/NO). 618 619 620############################################################## 621### Miscellaneous administrative options ################### 622############################################################## 623 624auditd_enable="NO" # Run the audit daemon. 625auditd_program="/usr/sbin/auditd" # Path to the audit daemon. 626auditd_flags="" # Which options to pass to the audit daemon. 627auditdistd_enable="NO" # Run the audit daemon. 628auditdistd_program="/usr/sbin/auditdistd" # Path to the auditdistd daemon. 629auditdistd_flags="" # Which options to pass to the auditdistd daemon. 630cron_enable="YES" # Run the periodic job daemon. 631cron_program="/usr/sbin/cron" # Which cron executable to run (if enabled). 632cron_dst="YES" # Handle DST transitions intelligently (YES/NO) 633cron_flags="" # Which options to pass to the cron daemon. 634cfumass_enable="NO" # Create default LUN for cfumass(4). 635cfumass_dir="/var/cfumass" # File to LUN's contents. 636cfumass_image="/var/tmp/cfumass.img" # LUN's backing file path. 637lpd_enable="NO" # Run the line printer daemon. 638lpd_program="/usr/sbin/lpd" # path to lpd, if you want a different one. 639lpd_flags="" # Flags to lpd (if enabled). 640nscd_enable="NO" # Run the nsswitch caching daemon. 641chkprintcap_enable="NO" # Run chkprintcap(8) before running lpd. 642chkprintcap_flags="-d" # Create missing directories by default. 643dumpdev="AUTO" # Device to crashdump to (device name, AUTO, or NO); 644 # this should be commented out here 645 # for stable branches to respect kenv. 646dumpon_flags="" # Options to pass to dumpon(8), followed by dumpdev. 647dumpdir="/var/crash" # Directory where crash dumps are to be stored 648savecore_enable="YES" # Extract core from dump devices if any 649savecore_flags="-m 10" # Used if dumpdev is enabled above, and present. 650 # By default, only the 10 most recent kernel dumps 651 # are saved. 652service_delete_empty="NO" # Have 'service delete' remove empty rc.conf.d files. 653crashinfo_enable="YES" # Automatically generate crash dump summary. 654crashinfo_program="/usr/sbin/crashinfo" # Script to generate crash dump summary. 655quota_enable="NO" # turn on quotas on startup (or NO). 656check_quotas="YES" # Check quotas on startup (or NO). 657quotaon_flags="-a" # Turn quotas on for all file systems (if enabled) 658quotaoff_flags="-a" # Turn quotas off for all file systems at shutdown 659quotacheck_flags="-a" # Check all file system quotas (if enabled) 660accounting_enable="NO" # Turn on process accounting (or NO). 661firstboot_sentinel="/firstboot" # Scripts with "firstboot" keyword are run if 662 # this file exists. Should be on a R/W filesystem so 663 # the file can be deleted after the boot completes. 664sysvipc_enable="NO" # Load System V IPC primitives at startup (or NO). 665linux_enable="NO" # Linux binary compatibility loaded at startup (or NO). 666linux_mounts_enable="YES" # If linux_enable is set to YES, mount Linux-specific 667 # filesystems at startup. 668clear_tmp_enable="NO" # Clear /tmp at startup. 669clear_tmp_X="YES" # Clear and recreate X11-related directories in /tmp 670ldconfig_insecure="NO" # Set to YES to disable ldconfig security checks 671ldconfig_paths="/usr/lib/compat ${_localbase}/lib ${_localbase}/lib/compat/pkg" 672 # shared library search paths 673ldconfig32_paths="/usr/lib32/compat" 674 # 32-bit compatibility shared library search paths 675ldconfig_local_dirs="${_localbase}/libdata/ldconfig" 676 # Local directories with ldconfig configuration files. 677ldconfig_local32_dirs="${_localbase}/libdata/ldconfig32" 678 # Local directories with 32-bit compatibility ldconfig 679 # configuration files. 680kern_securelevel_enable="NO" # kernel security level (see security(7)) 681kern_securelevel="-1" # range: -1..3 ; `-1' is the most insecure 682 # Note that setting securelevel to 0 will result 683 # in the system booting with securelevel set to 1, as 684 # init(8) will raise the level when rc(8) completes. 685update_motd="YES" # update version info in /var/run/motd (or NO) 686entropy_boot_file="/boot/entropy" # Set to NO to disable very early 687 # (used at early boot time) entropy caching through reboots. 688entropy_file="/entropy" # Set to NO to disable late (used when going multi-user) 689 # entropy through reboots. 690 # /var/db/entropy-file is preferred if / is not avail. 691entropy_dir="/var/db/entropy" # Set to NO to disable caching entropy via cron. 692entropy_save_sz="4096" # Size of the entropy cache files. 693entropy_save_num="8" # Number of entropy cache files to save. 694harvest_mask="511" # Entropy device harvests all but the very invasive sources. 695 # (See 'sysctl kern.random.harvest' and random(4)) 696osrelease_enable="YES" # Update /var/run/os-release on boot (or NO). 697osrelease_file="/var/run/os-release" # File to update for os-release. 698osrelease_perms="444" # Default permission for os-release file. 699dmesg_enable="YES" # Save dmesg(8) to /var/run/dmesg.boot 700watchdogd_enable="NO" # Start the software watchdog daemon 701watchdogd_flags="" # Flags to watchdogd (if enabled) 702watchdogd_timeout="" # watchdogd timeout, overrides -t in watchdogd_flags 703watchdogd_shutdown_timeout="" # Timeout to use after watchdogd is stopped. 704 # Has effect only for system shutdown. 705 # Overrides -x in watchdogd_flags. 706devfs_rulesets="/etc/defaults/devfs.rules /etc/devfs.rules" # Files containing 707 # devfs(8) rules. 708devfs_system_ruleset="" # The name (NOT number) of a ruleset to apply to /dev 709devfs_set_rulesets="" # A list of /mount/dev=ruleset_name settings to 710 # apply (must be mounted already, i.e. fstab(5)) 711devfs_load_rulesets="YES" # Enable to always load the default rulesets 712performance_cx_lowest="NONE" # Online CPU idle state 713performance_cpu_freq="NONE" # Online CPU frequency 714economy_cx_lowest="Cmax" # Offline CPU idle state 715economy_cpu_freq="NONE" # Offline CPU frequency 716virecover_enable="YES" # Perform housekeeping for the vi(1) editor 717ugidfw_enable="NO" # Load mac_bsdextended(4) rules on boot 718bsdextended_script="/etc/rc.bsdextended" # Default mac_bsdextended(4) 719 # ruleset file. 720newsyslog_enable="YES" # Run newsyslog at startup. 721newsyslog_flags="-CN" # Newsyslog flags to create marked files 722mixer_enable="YES" # Run the sound mixer. 723opensm_enable="NO" # Opensm(8) for infiniband devices defaults to off 724nuageinit_enable="NO" # Run nuageinit at startup 725 726# rctl(8) requires kernel options RACCT and RCTL 727rctl_enable="YES" # Load rctl(8) rules on boot 728rctl_rules="/etc/rctl.conf" # rctl(8) ruleset. See rctl.conf(5). 729 730iovctl_files="" # Config files for iovctl(8) 731 732############################################################## 733### Jail Configuration (see rc.conf(5) manual page) ########## 734############################################################## 735jail_enable="NO" # Set to NO to disable starting of any jails 736jail_conf="/etc/jail.conf" # Configuration file for jail(8) 737jail_confwarn="YES" # Prevent warning about obsolete per-jail configuration 738jail_parallel_start="NO" # Start jails in the background 739jail_list="" # Space separated list of names of jails 740jail_reverse_stop="NO" # Stop jails in reverse order 741 742############################################################## 743### Define source_rc_confs, the mechanism used by /etc/rc.* ## 744### scripts to source rc_conf_files overrides safely. ## 745############################################################## 746 747if [ -z "${source_rc_confs_defined}" ]; then 748 source_rc_confs_defined=yes 749 source_rc_confs() { 750 local i sourced_files 751 for i in ${rc_conf_files}; do 752 case ${sourced_files} in 753 *:$i:*) 754 ;; 755 *) 756 sourced_files="${sourced_files}:$i:" 757 if [ -r $i ]; then 758 . $i 759 fi 760 ;; 761 esac 762 done 763 # Re-do process to pick up [possibly] redefined $rc_conf_files 764 for i in ${rc_conf_files}; do 765 case ${sourced_files} in 766 *:$i:*) 767 ;; 768 *) 769 sourced_files="${sourced_files}:$i:" 770 if [ -r $i ]; then 771 . $i 772 fi 773 ;; 774 esac 775 done 776 } 777fi 778 779# Allow vendors to override FreeBSD defaults in /etc/default/rc.conf 780# without the need to carefully manage /etc/rc.conf. 781if [ -r /etc/defaults/vendor.conf ]; then 782 . /etc/defaults/vendor.conf 783fi 784