1/*- 2 * Core routines and tables shareable across OS platforms. 3 * 4 * Copyright (c) 1994-2002, 2004 Justin T. Gibbs. 5 * Copyright (c) 2000-2003 Adaptec Inc. 6 * All rights reserved. 7 * 8 * Redistribution and use in source and binary forms, with or without 9 * modification, are permitted provided that the following conditions 10 * are met: 11 * 1. Redistributions of source code must retain the above copyright 12 * notice, this list of conditions, and the following disclaimer, 13 * without modification. 14 * 2. Redistributions in binary form must reproduce at minimum a disclaimer 15 * substantially similar to the "NO WARRANTY" disclaimer below 16 * ("Disclaimer") and any redistribution must be conditioned upon 17 * including a substantially similar Disclaimer requirement for further 18 * binary redistribution. 19 * 3. Neither the names of the above-listed copyright holders nor the names 20 * of any contributors may be used to endorse or promote products derived 21 * from this software without specific prior written permission. 22 * 23 * Alternatively, this software may be distributed under the terms of the 24 * GNU General Public License ("GPL") version 2 as published by the Free 25 * Software Foundation. 26 * 27 * NO WARRANTY 28 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 29 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 30 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR 31 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 32 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 33 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 34 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 35 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 36 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING 37 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 38 * POSSIBILITY OF SUCH DAMAGES. 39 * 40 * $Id: //depot/aic7xxx/aic7xxx/aic79xx.c#246 $ 41 */ 42 43#ifdef __linux__ 44#include "aic79xx_osm.h" 45#include "aic79xx_inline.h" 46#include "aicasm/aicasm_insformat.h" 47#else 48#include <sys/cdefs.h> 49__FBSDID("$FreeBSD$"); 50#include <dev/aic7xxx/aic79xx_osm.h> 51#include <dev/aic7xxx/aic79xx_inline.h> 52#include <dev/aic7xxx/aicasm/aicasm_insformat.h> 53#endif 54 55/******************************** Globals *************************************/ 56struct ahd_softc_tailq ahd_tailq = TAILQ_HEAD_INITIALIZER(ahd_tailq); 57uint32_t ahd_attach_to_HostRAID_controllers = 1; 58 59/***************************** Lookup Tables **********************************/ 60char *ahd_chip_names[] = 61{ 62 "NONE", 63 "aic7901", 64 "aic7902", 65 "aic7901A" 66}; 67 68/* 69 * Hardware error codes. 70 */ 71struct ahd_hard_error_entry { 72 uint8_t errno; 73 char *errmesg; 74}; 75 76static struct ahd_hard_error_entry ahd_hard_errors[] = { 77 { DSCTMOUT, "Discard Timer has timed out" }, 78 { ILLOPCODE, "Illegal Opcode in sequencer program" }, 79 { SQPARERR, "Sequencer Parity Error" }, 80 { DPARERR, "Data-path Parity Error" }, 81 { MPARERR, "Scratch or SCB Memory Parity Error" }, 82 { CIOPARERR, "CIOBUS Parity Error" }, 83}; 84static const u_int num_errors = NUM_ELEMENTS(ahd_hard_errors); 85 86static struct ahd_phase_table_entry ahd_phase_table[] = 87{ 88 { P_DATAOUT, MSG_NOOP, "in Data-out phase" }, 89 { P_DATAIN, MSG_INITIATOR_DET_ERR, "in Data-in phase" }, 90 { P_DATAOUT_DT, MSG_NOOP, "in DT Data-out phase" }, 91 { P_DATAIN_DT, MSG_INITIATOR_DET_ERR, "in DT Data-in phase" }, 92 { P_COMMAND, MSG_NOOP, "in Command phase" }, 93 { P_MESGOUT, MSG_NOOP, "in Message-out phase" }, 94 { P_STATUS, MSG_INITIATOR_DET_ERR, "in Status phase" }, 95 { P_MESGIN, MSG_PARITY_ERROR, "in Message-in phase" }, 96 { P_BUSFREE, MSG_NOOP, "while idle" }, 97 { 0, MSG_NOOP, "in unknown phase" } 98}; 99 100/* 101 * In most cases we only wish to itterate over real phases, so 102 * exclude the last element from the count. 103 */ 104static const u_int num_phases = NUM_ELEMENTS(ahd_phase_table) - 1; 105 106/* Our Sequencer Program */ 107#include "aic79xx_seq.h" 108 109/**************************** Function Declarations ***************************/ 110static void ahd_handle_transmission_error(struct ahd_softc *ahd); 111static void ahd_handle_lqiphase_error(struct ahd_softc *ahd, 112 u_int lqistat1); 113static int ahd_handle_pkt_busfree(struct ahd_softc *ahd, 114 u_int busfreetime); 115static int ahd_handle_nonpkt_busfree(struct ahd_softc *ahd); 116static void ahd_handle_proto_violation(struct ahd_softc *ahd); 117static void ahd_force_renegotiation(struct ahd_softc *ahd, 118 struct ahd_devinfo *devinfo); 119 120static struct ahd_tmode_tstate* 121 ahd_alloc_tstate(struct ahd_softc *ahd, 122 u_int scsi_id, char channel); 123#ifdef AHD_TARGET_MODE 124static void ahd_free_tstate(struct ahd_softc *ahd, 125 u_int scsi_id, char channel, int force); 126#endif 127static void ahd_devlimited_syncrate(struct ahd_softc *ahd, 128 struct ahd_initiator_tinfo *, 129 u_int *period, 130 u_int *ppr_options, 131 role_t role); 132static void ahd_update_neg_table(struct ahd_softc *ahd, 133 struct ahd_devinfo *devinfo, 134 struct ahd_transinfo *tinfo); 135static void ahd_update_pending_scbs(struct ahd_softc *ahd); 136static void ahd_fetch_devinfo(struct ahd_softc *ahd, 137 struct ahd_devinfo *devinfo); 138static void ahd_scb_devinfo(struct ahd_softc *ahd, 139 struct ahd_devinfo *devinfo, 140 struct scb *scb); 141static void ahd_setup_initiator_msgout(struct ahd_softc *ahd, 142 struct ahd_devinfo *devinfo, 143 struct scb *scb); 144static void ahd_build_transfer_msg(struct ahd_softc *ahd, 145 struct ahd_devinfo *devinfo); 146static void ahd_construct_sdtr(struct ahd_softc *ahd, 147 struct ahd_devinfo *devinfo, 148 u_int period, u_int offset); 149static void ahd_construct_wdtr(struct ahd_softc *ahd, 150 struct ahd_devinfo *devinfo, 151 u_int bus_width); 152static void ahd_construct_ppr(struct ahd_softc *ahd, 153 struct ahd_devinfo *devinfo, 154 u_int period, u_int offset, 155 u_int bus_width, u_int ppr_options); 156static void ahd_clear_msg_state(struct ahd_softc *ahd); 157static void ahd_handle_message_phase(struct ahd_softc *ahd); 158typedef enum { 159 AHDMSG_1B, 160 AHDMSG_2B, 161 AHDMSG_EXT 162} ahd_msgtype; 163static int ahd_sent_msg(struct ahd_softc *ahd, ahd_msgtype type, 164 u_int msgval, int full); 165static int ahd_parse_msg(struct ahd_softc *ahd, 166 struct ahd_devinfo *devinfo); 167static int ahd_handle_msg_reject(struct ahd_softc *ahd, 168 struct ahd_devinfo *devinfo); 169static void ahd_handle_ign_wide_residue(struct ahd_softc *ahd, 170 struct ahd_devinfo *devinfo); 171static void ahd_reinitialize_dataptrs(struct ahd_softc *ahd); 172static void ahd_handle_devreset(struct ahd_softc *ahd, 173 struct ahd_devinfo *devinfo, 174 u_int lun, cam_status status, 175 char *message, int verbose_level); 176#ifdef AHD_TARGET_MODE 177static void ahd_setup_target_msgin(struct ahd_softc *ahd, 178 struct ahd_devinfo *devinfo, 179 struct scb *scb); 180#endif 181 182static u_int ahd_sglist_size(struct ahd_softc *ahd); 183static u_int ahd_sglist_allocsize(struct ahd_softc *ahd); 184static bus_dmamap_callback_t 185 ahd_dmamap_cb; 186static void ahd_initialize_hscbs(struct ahd_softc *ahd); 187static int ahd_init_scbdata(struct ahd_softc *ahd); 188static void ahd_fini_scbdata(struct ahd_softc *ahd); 189static void ahd_setup_iocell_workaround(struct ahd_softc *ahd); 190static void ahd_iocell_first_selection(struct ahd_softc *ahd); 191static void ahd_add_col_list(struct ahd_softc *ahd, 192 struct scb *scb, u_int col_idx); 193static void ahd_rem_col_list(struct ahd_softc *ahd, 194 struct scb *scb); 195static void ahd_chip_init(struct ahd_softc *ahd); 196static void ahd_qinfifo_requeue(struct ahd_softc *ahd, 197 struct scb *prev_scb, 198 struct scb *scb); 199static int ahd_qinfifo_count(struct ahd_softc *ahd); 200static int ahd_search_scb_list(struct ahd_softc *ahd, int target, 201 char channel, int lun, u_int tag, 202 role_t role, uint32_t status, 203 ahd_search_action action, 204 u_int *list_head, u_int *list_tail, 205 u_int tid); 206static void ahd_stitch_tid_list(struct ahd_softc *ahd, 207 u_int tid_prev, u_int tid_cur, 208 u_int tid_next); 209static void ahd_add_scb_to_free_list(struct ahd_softc *ahd, 210 u_int scbid); 211static u_int ahd_rem_wscb(struct ahd_softc *ahd, u_int scbid, 212 u_int prev, u_int next, u_int tid); 213static void ahd_reset_current_bus(struct ahd_softc *ahd); 214static ahd_callback_t ahd_reset_poll; 215static ahd_callback_t ahd_stat_timer; 216#ifdef AHD_DUMP_SEQ 217static void ahd_dumpseq(struct ahd_softc *ahd); 218#endif 219static void ahd_loadseq(struct ahd_softc *ahd); 220static int ahd_check_patch(struct ahd_softc *ahd, 221 struct patch **start_patch, 222 u_int start_instr, u_int *skip_addr); 223static u_int ahd_resolve_seqaddr(struct ahd_softc *ahd, 224 u_int address); 225static void ahd_download_instr(struct ahd_softc *ahd, 226 u_int instrptr, uint8_t *dconsts); 227static int ahd_probe_stack_size(struct ahd_softc *ahd); 228static int ahd_other_scb_timeout(struct ahd_softc *ahd, 229 struct scb *scb, 230 struct scb *other_scb); 231static int ahd_scb_active_in_fifo(struct ahd_softc *ahd, 232 struct scb *scb); 233static void ahd_run_data_fifo(struct ahd_softc *ahd, 234 struct scb *scb); 235 236#ifdef AHD_TARGET_MODE 237static void ahd_queue_lstate_event(struct ahd_softc *ahd, 238 struct ahd_tmode_lstate *lstate, 239 u_int initiator_id, 240 u_int event_type, 241 u_int event_arg); 242static void ahd_update_scsiid(struct ahd_softc *ahd, 243 u_int targid_mask); 244static int ahd_handle_target_cmd(struct ahd_softc *ahd, 245 struct target_cmd *cmd); 246#endif 247 248/******************************** Private Inlines *****************************/ 249static __inline void ahd_assert_atn(struct ahd_softc *ahd); 250static __inline int ahd_currently_packetized(struct ahd_softc *ahd); 251static __inline int ahd_set_active_fifo(struct ahd_softc *ahd); 252 253static __inline void 254ahd_assert_atn(struct ahd_softc *ahd) 255{ 256 ahd_outb(ahd, SCSISIGO, ATNO); 257} 258 259/* 260 * Determine if the current connection has a packetized 261 * agreement. This does not necessarily mean that we 262 * are currently in a packetized transfer. We could 263 * just as easily be sending or receiving a message. 264 */ 265static __inline int 266ahd_currently_packetized(struct ahd_softc *ahd) 267{ 268 ahd_mode_state saved_modes; 269 int packetized; 270 271 saved_modes = ahd_save_modes(ahd); 272 if ((ahd->bugs & AHD_PKTIZED_STATUS_BUG) != 0) { 273 /* 274 * The packetized bit refers to the last 275 * connection, not the current one. Check 276 * for non-zero LQISTATE instead. 277 */ 278 ahd_set_modes(ahd, AHD_MODE_CFG, AHD_MODE_CFG); 279 packetized = ahd_inb(ahd, LQISTATE) != 0; 280 } else { 281 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 282 packetized = ahd_inb(ahd, LQISTAT2) & PACKETIZED; 283 } 284 ahd_restore_modes(ahd, saved_modes); 285 return (packetized); 286} 287 288static __inline int 289ahd_set_active_fifo(struct ahd_softc *ahd) 290{ 291 u_int active_fifo; 292 293 AHD_ASSERT_MODES(ahd, AHD_MODE_SCSI_MSK, AHD_MODE_SCSI_MSK); 294 active_fifo = ahd_inb(ahd, DFFSTAT) & CURRFIFO; 295 switch (active_fifo) { 296 case 0: 297 case 1: 298 ahd_set_modes(ahd, active_fifo, active_fifo); 299 return (1); 300 default: 301 return (0); 302 } 303} 304 305/************************* Sequencer Execution Control ************************/ 306/* 307 * Restart the sequencer program from address zero 308 */ 309void 310ahd_restart(struct ahd_softc *ahd) 311{ 312 313 ahd_pause(ahd); 314 315 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 316 317 /* No more pending messages */ 318 ahd_clear_msg_state(ahd); 319 ahd_outb(ahd, SCSISIGO, 0); /* De-assert BSY */ 320 ahd_outb(ahd, MSG_OUT, MSG_NOOP); /* No message to send */ 321 ahd_outb(ahd, SXFRCTL1, ahd_inb(ahd, SXFRCTL1) & ~BITBUCKET); 322 ahd_outb(ahd, SEQINTCTL, 0); 323 ahd_outb(ahd, LASTPHASE, P_BUSFREE); 324 ahd_outb(ahd, SEQ_FLAGS, 0); 325 ahd_outb(ahd, SAVED_SCSIID, 0xFF); 326 ahd_outb(ahd, SAVED_LUN, 0xFF); 327 328 /* 329 * Ensure that the sequencer's idea of TQINPOS 330 * matches our own. The sequencer increments TQINPOS 331 * only after it sees a DMA complete and a reset could 332 * occur before the increment leaving the kernel to believe 333 * the command arrived but the sequencer to not. 334 */ 335 ahd_outb(ahd, TQINPOS, ahd->tqinfifonext); 336 337 /* Always allow reselection */ 338 ahd_outb(ahd, SCSISEQ1, 339 ahd_inb(ahd, SCSISEQ_TEMPLATE) & (ENSELI|ENRSELI|ENAUTOATNP)); 340 ahd_set_modes(ahd, AHD_MODE_CCHAN, AHD_MODE_CCHAN); 341 342 /* 343 * Clear any pending sequencer interrupt. It is no 344 * longer relevant since we're resetting the Program 345 * Counter. 346 */ 347 ahd_outb(ahd, CLRINT, CLRSEQINT); 348 349 ahd_outb(ahd, SEQCTL0, FASTMODE|SEQRESET); 350 ahd_unpause(ahd); 351} 352 353void 354ahd_clear_fifo(struct ahd_softc *ahd, u_int fifo) 355{ 356 ahd_mode_state saved_modes; 357 358#ifdef AHD_DEBUG 359 if ((ahd_debug & AHD_SHOW_FIFOS) != 0) 360 printf("%s: Clearing FIFO %d\n", ahd_name(ahd), fifo); 361#endif 362 saved_modes = ahd_save_modes(ahd); 363 ahd_set_modes(ahd, fifo, fifo); 364 ahd_outb(ahd, DFFSXFRCTL, RSTCHN|CLRSHCNT); 365 if ((ahd_inb(ahd, SG_STATE) & FETCH_INPROG) != 0) 366 ahd_outb(ahd, CCSGCTL, CCSGRESET); 367 ahd_outb(ahd, LONGJMP_ADDR + 1, INVALID_ADDR); 368 ahd_outb(ahd, SG_STATE, 0); 369 ahd_restore_modes(ahd, saved_modes); 370} 371 372/************************* Input/Output Queues ********************************/ 373/* 374 * Flush and completed commands that are sitting in the command 375 * complete queues down on the chip but have yet to be dma'ed back up. 376 */ 377void 378ahd_flush_qoutfifo(struct ahd_softc *ahd) 379{ 380 struct scb *scb; 381 ahd_mode_state saved_modes; 382 u_int saved_scbptr; 383 u_int ccscbctl; 384 u_int scbid; 385 u_int next_scbid; 386 387 saved_modes = ahd_save_modes(ahd); 388 389 /* 390 * Flush the good status FIFO for completed packetized commands. 391 */ 392 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 393 saved_scbptr = ahd_get_scbptr(ahd); 394 while ((ahd_inb(ahd, LQISTAT2) & LQIGSAVAIL) != 0) { 395 u_int fifo_mode; 396 u_int i; 397 398 scbid = ahd_inw(ahd, GSFIFO); 399 scb = ahd_lookup_scb(ahd, scbid); 400 if (scb == NULL) { 401 printf("%s: Warning - GSFIFO SCB %d invalid\n", 402 ahd_name(ahd), scbid); 403 AHD_CORRECTABLE_ERROR(ahd); 404 continue; 405 } 406 /* 407 * Determine if this transaction is still active in 408 * any FIFO. If it is, we must flush that FIFO to 409 * the host before completing the command. 410 */ 411 fifo_mode = 0; 412rescan_fifos: 413 for (i = 0; i < 2; i++) { 414 /* Toggle to the other mode. */ 415 fifo_mode ^= 1; 416 ahd_set_modes(ahd, fifo_mode, fifo_mode); 417 418 if (ahd_scb_active_in_fifo(ahd, scb) == 0) 419 continue; 420 421 ahd_run_data_fifo(ahd, scb); 422 423 /* 424 * Running this FIFO may cause a CFG4DATA for 425 * this same transaction to assert in the other 426 * FIFO or a new snapshot SAVEPTRS interrupt 427 * in this FIFO. Even running a FIFO may not 428 * clear the transaction if we are still waiting 429 * for data to drain to the host. We must loop 430 * until the transaction is not active in either 431 * FIFO just to be sure. Reset our loop counter 432 * so we will visit both FIFOs again before 433 * declaring this transaction finished. We 434 * also delay a bit so that status has a chance 435 * to change before we look at this FIFO again. 436 */ 437 aic_delay(200); 438 goto rescan_fifos; 439 } 440 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 441 ahd_set_scbptr(ahd, scbid); 442 if ((ahd_inb_scbram(ahd, SCB_SGPTR) & SG_LIST_NULL) == 0 443 && ((ahd_inb_scbram(ahd, SCB_SGPTR) & SG_FULL_RESID) != 0 444 || (ahd_inb_scbram(ahd, SCB_RESIDUAL_SGPTR) 445 & SG_LIST_NULL) != 0)) { 446 u_int comp_head; 447 448 /* 449 * The transfer completed with a residual. 450 * Place this SCB on the complete DMA list 451 * so that we update our in-core copy of the 452 * SCB before completing the command. 453 */ 454 ahd_outb(ahd, SCB_SCSI_STATUS, 0); 455 ahd_outb(ahd, SCB_SGPTR, 456 ahd_inb_scbram(ahd, SCB_SGPTR) 457 | SG_STATUS_VALID); 458 ahd_outw(ahd, SCB_TAG, scbid); 459 ahd_outw(ahd, SCB_NEXT_COMPLETE, SCB_LIST_NULL); 460 comp_head = ahd_inw(ahd, COMPLETE_DMA_SCB_HEAD); 461 if (SCBID_IS_NULL(comp_head)) { 462 ahd_outw(ahd, COMPLETE_DMA_SCB_HEAD, scbid); 463 ahd_outw(ahd, COMPLETE_DMA_SCB_TAIL, scbid); 464 } else { 465 u_int tail; 466 467 tail = ahd_inw(ahd, COMPLETE_DMA_SCB_TAIL); 468 ahd_set_scbptr(ahd, tail); 469 ahd_outw(ahd, SCB_NEXT_COMPLETE, scbid); 470 ahd_outw(ahd, COMPLETE_DMA_SCB_TAIL, scbid); 471 ahd_set_scbptr(ahd, scbid); 472 } 473 } else 474 ahd_complete_scb(ahd, scb); 475 } 476 ahd_set_scbptr(ahd, saved_scbptr); 477 478 /* 479 * Setup for command channel portion of flush. 480 */ 481 ahd_set_modes(ahd, AHD_MODE_CCHAN, AHD_MODE_CCHAN); 482 483 /* 484 * Wait for any inprogress DMA to complete and clear DMA state 485 * if this if for an SCB in the qinfifo. 486 */ 487 while (((ccscbctl = ahd_inb(ahd, CCSCBCTL)) & (CCARREN|CCSCBEN)) != 0) { 488 489 if ((ccscbctl & (CCSCBDIR|CCARREN)) == (CCSCBDIR|CCARREN)) { 490 if ((ccscbctl & ARRDONE) != 0) 491 break; 492 } else if ((ccscbctl & CCSCBDONE) != 0) 493 break; 494 aic_delay(200); 495 } 496 /* 497 * We leave the sequencer to cleanup in the case of DMA's to 498 * update the qoutfifo. In all other cases (DMA's to the 499 * chip or a push of an SCB from the COMPLETE_DMA_SCB list), 500 * we disable the DMA engine so that the sequencer will not 501 * attempt to handle the DMA completion. 502 */ 503 if ((ccscbctl & CCSCBDIR) != 0 || (ccscbctl & ARRDONE) != 0) 504 ahd_outb(ahd, CCSCBCTL, ccscbctl & ~(CCARREN|CCSCBEN)); 505 506 /* 507 * Complete any SCBs that just finished 508 * being DMA'ed into the qoutfifo. 509 */ 510 ahd_run_qoutfifo(ahd); 511 512 saved_scbptr = ahd_get_scbptr(ahd); 513 /* 514 * Manually update/complete any completed SCBs that are waiting to be 515 * DMA'ed back up to the host. 516 */ 517 scbid = ahd_inw(ahd, COMPLETE_DMA_SCB_HEAD); 518 while (!SCBID_IS_NULL(scbid)) { 519 uint8_t *hscb_ptr; 520 u_int i; 521 522 ahd_set_scbptr(ahd, scbid); 523 next_scbid = ahd_inw_scbram(ahd, SCB_NEXT_COMPLETE); 524 scb = ahd_lookup_scb(ahd, scbid); 525 if (scb == NULL) { 526 printf("%s: Warning - DMA-up and complete " 527 "SCB %d invalid\n", ahd_name(ahd), scbid); 528 AHD_CORRECTABLE_ERROR(ahd); 529 continue; 530 } 531 hscb_ptr = (uint8_t *)scb->hscb; 532 for (i = 0; i < sizeof(struct hardware_scb); i++) 533 *hscb_ptr++ = ahd_inb_scbram(ahd, SCB_BASE + i); 534 535 ahd_complete_scb(ahd, scb); 536 scbid = next_scbid; 537 } 538 ahd_outw(ahd, COMPLETE_DMA_SCB_HEAD, SCB_LIST_NULL); 539 ahd_outw(ahd, COMPLETE_DMA_SCB_TAIL, SCB_LIST_NULL); 540 541 scbid = ahd_inw(ahd, COMPLETE_ON_QFREEZE_HEAD); 542 while (!SCBID_IS_NULL(scbid)) { 543 544 ahd_set_scbptr(ahd, scbid); 545 next_scbid = ahd_inw_scbram(ahd, SCB_NEXT_COMPLETE); 546 scb = ahd_lookup_scb(ahd, scbid); 547 if (scb == NULL) { 548 printf("%s: Warning - Complete Qfrz SCB %d invalid\n", 549 ahd_name(ahd), scbid); 550 AHD_CORRECTABLE_ERROR(ahd); 551 continue; 552 } 553 554 ahd_complete_scb(ahd, scb); 555 scbid = next_scbid; 556 } 557 ahd_outw(ahd, COMPLETE_ON_QFREEZE_HEAD, SCB_LIST_NULL); 558 559 scbid = ahd_inw(ahd, COMPLETE_SCB_HEAD); 560 while (!SCBID_IS_NULL(scbid)) { 561 562 ahd_set_scbptr(ahd, scbid); 563 next_scbid = ahd_inw_scbram(ahd, SCB_NEXT_COMPLETE); 564 scb = ahd_lookup_scb(ahd, scbid); 565 if (scb == NULL) { 566 printf("%s: Warning - Complete SCB %d invalid\n", 567 ahd_name(ahd), scbid); 568 AHD_CORRECTABLE_ERROR(ahd); 569 continue; 570 } 571 572 ahd_complete_scb(ahd, scb); 573 scbid = next_scbid; 574 } 575 ahd_outw(ahd, COMPLETE_SCB_HEAD, SCB_LIST_NULL); 576 577 /* 578 * Restore state. 579 */ 580 ahd_set_scbptr(ahd, saved_scbptr); 581 ahd_restore_modes(ahd, saved_modes); 582 ahd->flags |= AHD_UPDATE_PEND_CMDS; 583} 584 585/* 586 * Determine if an SCB for a packetized transaction 587 * is active in a FIFO. 588 */ 589static int 590ahd_scb_active_in_fifo(struct ahd_softc *ahd, struct scb *scb) 591{ 592 593 /* 594 * The FIFO is only active for our transaction if 595 * the SCBPTR matches the SCB's ID and the firmware 596 * has installed a handler for the FIFO or we have 597 * a pending SAVEPTRS or CFG4DATA interrupt. 598 */ 599 if (ahd_get_scbptr(ahd) != SCB_GET_TAG(scb) 600 || ((ahd_inb(ahd, LONGJMP_ADDR+1) & INVALID_ADDR) != 0 601 && (ahd_inb(ahd, SEQINTSRC) & (CFG4DATA|SAVEPTRS)) == 0)) 602 return (0); 603 604 return (1); 605} 606 607/* 608 * Run a data fifo to completion for a transaction we know 609 * has completed across the SCSI bus (good status has been 610 * received). We are already set to the correct FIFO mode 611 * on entry to this routine. 612 * 613 * This function attempts to operate exactly as the firmware 614 * would when running this FIFO. Care must be taken to update 615 * this routine any time the firmware's FIFO algorithm is 616 * changed. 617 */ 618static void 619ahd_run_data_fifo(struct ahd_softc *ahd, struct scb *scb) 620{ 621 u_int seqintsrc; 622 623 seqintsrc = ahd_inb(ahd, SEQINTSRC); 624 if ((seqintsrc & CFG4DATA) != 0) { 625 uint32_t datacnt; 626 uint32_t sgptr; 627 628 /* 629 * Clear full residual flag. 630 */ 631 sgptr = ahd_inl_scbram(ahd, SCB_SGPTR) & ~SG_FULL_RESID; 632 ahd_outb(ahd, SCB_SGPTR, sgptr); 633 634 /* 635 * Load datacnt and address. 636 */ 637 datacnt = ahd_inl_scbram(ahd, SCB_DATACNT); 638 if ((datacnt & AHD_DMA_LAST_SEG) != 0) { 639 sgptr |= LAST_SEG; 640 ahd_outb(ahd, SG_STATE, 0); 641 } else 642 ahd_outb(ahd, SG_STATE, LOADING_NEEDED); 643 ahd_outq(ahd, HADDR, ahd_inq_scbram(ahd, SCB_DATAPTR)); 644 ahd_outl(ahd, HCNT, datacnt & AHD_SG_LEN_MASK); 645 ahd_outb(ahd, SG_CACHE_PRE, sgptr); 646 ahd_outb(ahd, DFCNTRL, PRELOADEN|SCSIEN|HDMAEN); 647 648 /* 649 * Initialize Residual Fields. 650 */ 651 ahd_outb(ahd, SCB_RESIDUAL_DATACNT+3, datacnt >> 24); 652 ahd_outl(ahd, SCB_RESIDUAL_SGPTR, sgptr & SG_PTR_MASK); 653 654 /* 655 * Mark the SCB as having a FIFO in use. 656 */ 657 ahd_outb(ahd, SCB_FIFO_USE_COUNT, 658 ahd_inb_scbram(ahd, SCB_FIFO_USE_COUNT) + 1); 659 660 /* 661 * Install a "fake" handler for this FIFO. 662 */ 663 ahd_outw(ahd, LONGJMP_ADDR, 0); 664 665 /* 666 * Notify the hardware that we have satisfied 667 * this sequencer interrupt. 668 */ 669 ahd_outb(ahd, CLRSEQINTSRC, CLRCFG4DATA); 670 } else if ((seqintsrc & SAVEPTRS) != 0) { 671 uint32_t sgptr; 672 uint32_t resid; 673 674 if ((ahd_inb(ahd, LONGJMP_ADDR+1)&INVALID_ADDR) != 0) { 675 /* 676 * Snapshot Save Pointers. All that 677 * is necessary to clear the snapshot 678 * is a CLRCHN. 679 */ 680 goto clrchn; 681 } 682 683 /* 684 * Disable S/G fetch so the DMA engine 685 * is available to future users. 686 */ 687 if ((ahd_inb(ahd, SG_STATE) & FETCH_INPROG) != 0) 688 ahd_outb(ahd, CCSGCTL, 0); 689 ahd_outb(ahd, SG_STATE, 0); 690 691 /* 692 * Flush the data FIFO. Strickly only 693 * necessary for Rev A parts. 694 */ 695 ahd_outb(ahd, DFCNTRL, ahd_inb(ahd, DFCNTRL) | FIFOFLUSH); 696 697 /* 698 * Calculate residual. 699 */ 700 sgptr = ahd_inl_scbram(ahd, SCB_RESIDUAL_SGPTR); 701 resid = ahd_inl(ahd, SHCNT); 702 resid |= ahd_inb_scbram(ahd, SCB_RESIDUAL_DATACNT+3) << 24; 703 ahd_outl(ahd, SCB_RESIDUAL_DATACNT, resid); 704 if ((ahd_inb(ahd, SG_CACHE_SHADOW) & LAST_SEG) == 0) { 705 /* 706 * Must back up to the correct S/G element. 707 * Typically this just means resetting our 708 * low byte to the offset in the SG_CACHE, 709 * but if we wrapped, we have to correct 710 * the other bytes of the sgptr too. 711 */ 712 if ((ahd_inb(ahd, SG_CACHE_SHADOW) & 0x80) != 0 713 && (sgptr & 0x80) == 0) 714 sgptr -= 0x100; 715 sgptr &= ~0xFF; 716 sgptr |= ahd_inb(ahd, SG_CACHE_SHADOW) 717 & SG_ADDR_MASK; 718 ahd_outl(ahd, SCB_RESIDUAL_SGPTR, sgptr); 719 ahd_outb(ahd, SCB_RESIDUAL_DATACNT + 3, 0); 720 } else if ((resid & AHD_SG_LEN_MASK) == 0) { 721 ahd_outb(ahd, SCB_RESIDUAL_SGPTR, 722 sgptr | SG_LIST_NULL); 723 } 724 /* 725 * Save Pointers. 726 */ 727 ahd_outq(ahd, SCB_DATAPTR, ahd_inq(ahd, SHADDR)); 728 ahd_outl(ahd, SCB_DATACNT, resid); 729 ahd_outl(ahd, SCB_SGPTR, sgptr); 730 ahd_outb(ahd, CLRSEQINTSRC, CLRSAVEPTRS); 731 ahd_outb(ahd, SEQIMODE, 732 ahd_inb(ahd, SEQIMODE) | ENSAVEPTRS); 733 /* 734 * If the data is to the SCSI bus, we are 735 * done, otherwise wait for FIFOEMP. 736 */ 737 if ((ahd_inb(ahd, DFCNTRL) & DIRECTION) != 0) 738 goto clrchn; 739 } else if ((ahd_inb(ahd, SG_STATE) & LOADING_NEEDED) != 0) { 740 uint32_t sgptr; 741 uint64_t data_addr; 742 uint32_t data_len; 743 u_int dfcntrl; 744 745 /* 746 * Disable S/G fetch so the DMA engine 747 * is available to future users. We won't 748 * be using the DMA engine to load segments. 749 */ 750 if ((ahd_inb(ahd, SG_STATE) & FETCH_INPROG) != 0) { 751 ahd_outb(ahd, CCSGCTL, 0); 752 ahd_outb(ahd, SG_STATE, LOADING_NEEDED); 753 } 754 755 /* 756 * Wait for the DMA engine to notice that the 757 * host transfer is enabled and that there is 758 * space in the S/G FIFO for new segments before 759 * loading more segments. 760 */ 761 if ((ahd_inb(ahd, DFSTATUS) & PRELOAD_AVAIL) != 0 762 && (ahd_inb(ahd, DFCNTRL) & HDMAENACK) != 0) { 763 764 /* 765 * Determine the offset of the next S/G 766 * element to load. 767 */ 768 sgptr = ahd_inl_scbram(ahd, SCB_RESIDUAL_SGPTR); 769 sgptr &= SG_PTR_MASK; 770 if ((ahd->flags & AHD_64BIT_ADDRESSING) != 0) { 771 struct ahd_dma64_seg *sg; 772 773 sg = ahd_sg_bus_to_virt(ahd, scb, sgptr); 774 data_addr = sg->addr; 775 data_len = sg->len; 776 sgptr += sizeof(*sg); 777 } else { 778 struct ahd_dma_seg *sg; 779 780 sg = ahd_sg_bus_to_virt(ahd, scb, sgptr); 781 data_addr = sg->len & AHD_SG_HIGH_ADDR_MASK; 782 data_addr <<= 8; 783 data_addr |= sg->addr; 784 data_len = sg->len; 785 sgptr += sizeof(*sg); 786 } 787 788 /* 789 * Update residual information. 790 */ 791 ahd_outb(ahd, SCB_RESIDUAL_DATACNT+3, data_len >> 24); 792 ahd_outl(ahd, SCB_RESIDUAL_SGPTR, sgptr); 793 794 /* 795 * Load the S/G. 796 */ 797 if (data_len & AHD_DMA_LAST_SEG) { 798 sgptr |= LAST_SEG; 799 ahd_outb(ahd, SG_STATE, 0); 800 } 801 ahd_outq(ahd, HADDR, data_addr); 802 ahd_outl(ahd, HCNT, data_len & AHD_SG_LEN_MASK); 803 ahd_outb(ahd, SG_CACHE_PRE, sgptr & 0xFF); 804 805 /* 806 * Advertise the segment to the hardware. 807 */ 808 dfcntrl = ahd_inb(ahd, DFCNTRL)|PRELOADEN|HDMAEN; 809 if ((ahd->features & AHD_NEW_DFCNTRL_OPTS) != 0) { 810 /* 811 * Use SCSIENWRDIS so that SCSIEN 812 * is never modified by this 813 * operation. 814 */ 815 dfcntrl |= SCSIENWRDIS; 816 } 817 ahd_outb(ahd, DFCNTRL, dfcntrl); 818 } 819 } else if ((ahd_inb(ahd, SG_CACHE_SHADOW) & LAST_SEG_DONE) != 0) { 820 821 /* 822 * Transfer completed to the end of SG list 823 * and has flushed to the host. 824 */ 825 ahd_outb(ahd, SCB_SGPTR, 826 ahd_inb_scbram(ahd, SCB_SGPTR) | SG_LIST_NULL); 827 goto clrchn; 828 } else if ((ahd_inb(ahd, DFSTATUS) & FIFOEMP) != 0) { 829clrchn: 830 /* 831 * Clear any handler for this FIFO, decrement 832 * the FIFO use count for the SCB, and release 833 * the FIFO. 834 */ 835 ahd_outb(ahd, LONGJMP_ADDR + 1, INVALID_ADDR); 836 ahd_outb(ahd, SCB_FIFO_USE_COUNT, 837 ahd_inb_scbram(ahd, SCB_FIFO_USE_COUNT) - 1); 838 ahd_outb(ahd, DFFSXFRCTL, CLRCHN); 839 } 840} 841 842/* 843 * Look for entries in the QoutFIFO that have completed. 844 * The valid_tag completion field indicates the validity 845 * of the entry - the valid value toggles each time through 846 * the queue. We use the sg_status field in the completion 847 * entry to avoid referencing the hscb if the completion 848 * occurred with no errors and no residual. sg_status is 849 * a copy of the first byte (little endian) of the sgptr 850 * hscb field. 851 */ 852void 853ahd_run_qoutfifo(struct ahd_softc *ahd) 854{ 855 struct ahd_completion *completion; 856 struct scb *scb; 857 u_int scb_index; 858 859 if ((ahd->flags & AHD_RUNNING_QOUTFIFO) != 0) 860 panic("ahd_run_qoutfifo recursion"); 861 ahd->flags |= AHD_RUNNING_QOUTFIFO; 862 ahd_sync_qoutfifo(ahd, BUS_DMASYNC_POSTREAD); 863 for (;;) { 864 completion = &ahd->qoutfifo[ahd->qoutfifonext]; 865 866 if (completion->valid_tag != ahd->qoutfifonext_valid_tag) 867 break; 868 869 scb_index = aic_le16toh(completion->tag); 870 scb = ahd_lookup_scb(ahd, scb_index); 871 if (scb == NULL) { 872 printf("%s: WARNING no command for scb %d " 873 "(cmdcmplt)\nQOUTPOS = %d\n", 874 ahd_name(ahd), scb_index, 875 ahd->qoutfifonext); 876 AHD_CORRECTABLE_ERROR(ahd); 877 ahd_dump_card_state(ahd); 878 } else if ((completion->sg_status & SG_STATUS_VALID) != 0) { 879 ahd_handle_scb_status(ahd, scb); 880 } else { 881 ahd_done(ahd, scb); 882 } 883 884 ahd->qoutfifonext = (ahd->qoutfifonext+1) & (AHD_QOUT_SIZE-1); 885 if (ahd->qoutfifonext == 0) 886 ahd->qoutfifonext_valid_tag ^= QOUTFIFO_ENTRY_VALID; 887 } 888 ahd->flags &= ~AHD_RUNNING_QOUTFIFO; 889} 890 891/************************* Interrupt Handling *********************************/ 892void 893ahd_handle_hwerrint(struct ahd_softc *ahd) 894{ 895 /* 896 * Some catastrophic hardware error has occurred. 897 * Print it for the user and disable the controller. 898 */ 899 int i; 900 int error; 901 902 error = ahd_inb(ahd, ERROR); 903 for (i = 0; i < num_errors; i++) { 904 if ((error & ahd_hard_errors[i].errno) != 0) { 905 printf("%s: hwerrint, %s\n", 906 ahd_name(ahd), ahd_hard_errors[i].errmesg); 907 AHD_UNCORRECTABLE_ERROR(ahd); 908 } 909 } 910 911 ahd_dump_card_state(ahd); 912 panic("BRKADRINT"); 913 914 /* Tell everyone that this HBA is no longer available */ 915 ahd_abort_scbs(ahd, CAM_TARGET_WILDCARD, ALL_CHANNELS, 916 CAM_LUN_WILDCARD, SCB_LIST_NULL, ROLE_UNKNOWN, 917 CAM_NO_HBA); 918 919 /* Tell the system that this controller has gone away. */ 920 ahd_free(ahd); 921} 922 923void 924ahd_handle_seqint(struct ahd_softc *ahd, u_int intstat) 925{ 926 u_int seqintcode; 927 928 /* 929 * Save the sequencer interrupt code and clear the SEQINT 930 * bit. We will unpause the sequencer, if appropriate, 931 * after servicing the request. 932 */ 933 seqintcode = ahd_inb(ahd, SEQINTCODE); 934 ahd_outb(ahd, CLRINT, CLRSEQINT); 935 if ((ahd->bugs & AHD_INTCOLLISION_BUG) != 0) { 936 /* 937 * Unpause the sequencer and let it clear 938 * SEQINT by writing NO_SEQINT to it. This 939 * will cause the sequencer to be paused again, 940 * which is the expected state of this routine. 941 */ 942 ahd_unpause(ahd); 943 while (!ahd_is_paused(ahd)) 944 ; 945 ahd_outb(ahd, CLRINT, CLRSEQINT); 946 } 947 ahd_update_modes(ahd); 948#ifdef AHD_DEBUG 949 if ((ahd_debug & AHD_SHOW_MISC) != 0) 950 printf("%s: Handle Seqint Called for code %d\n", 951 ahd_name(ahd), seqintcode); 952#endif 953 switch (seqintcode) { 954 case ENTERING_NONPACK: 955 { 956 struct scb *scb; 957 u_int scbid; 958 959 AHD_ASSERT_MODES(ahd, ~(AHD_MODE_UNKNOWN_MSK|AHD_MODE_CFG_MSK), 960 ~(AHD_MODE_UNKNOWN_MSK|AHD_MODE_CFG_MSK)); 961 scbid = ahd_get_scbptr(ahd); 962 scb = ahd_lookup_scb(ahd, scbid); 963 if (scb == NULL) { 964 /* 965 * Somehow need to know if this 966 * is from a selection or reselection. 967 * From that, we can determine target 968 * ID so we at least have an I_T nexus. 969 */ 970 } else { 971 ahd_outb(ahd, SAVED_SCSIID, scb->hscb->scsiid); 972 ahd_outb(ahd, SAVED_LUN, scb->hscb->lun); 973 ahd_outb(ahd, SEQ_FLAGS, 0x0); 974 } 975 if ((ahd_inb(ahd, LQISTAT2) & LQIPHASE_OUTPKT) != 0 976 && (ahd_inb(ahd, SCSISIGO) & ATNO) != 0) { 977 /* 978 * Phase change after read stream with 979 * CRC error with P0 asserted on last 980 * packet. 981 */ 982#ifdef AHD_DEBUG 983 if ((ahd_debug & AHD_SHOW_RECOVERY) != 0) 984 printf("%s: Assuming LQIPHASE_NLQ with " 985 "P0 assertion\n", ahd_name(ahd)); 986#endif 987 } 988#ifdef AHD_DEBUG 989 if ((ahd_debug & AHD_SHOW_RECOVERY) != 0) 990 printf("%s: Entering NONPACK\n", ahd_name(ahd)); 991#endif 992 break; 993 } 994 case INVALID_SEQINT: 995 printf("%s: Invalid Sequencer interrupt occurred.\n", 996 ahd_name(ahd)); 997 ahd_dump_card_state(ahd); 998 ahd_reset_channel(ahd, 'A', /*Initiate Reset*/TRUE); 999 AHD_UNCORRECTABLE_ERROR(ahd); 1000 break; 1001 case STATUS_OVERRUN: 1002 { 1003 struct scb *scb; 1004 u_int scbid; 1005 1006 scbid = ahd_get_scbptr(ahd); 1007 scb = ahd_lookup_scb(ahd, scbid); 1008 if (scb != NULL) 1009 ahd_print_path(ahd, scb); 1010 else 1011 printf("%s: ", ahd_name(ahd)); 1012 printf("SCB %d Packetized Status Overrun", scbid); 1013 ahd_dump_card_state(ahd); 1014 ahd_reset_channel(ahd, 'A', /*Initiate Reset*/TRUE); 1015 AHD_UNCORRECTABLE_ERROR(ahd); 1016 break; 1017 } 1018 case CFG4ISTAT_INTR: 1019 { 1020 struct scb *scb; 1021 u_int scbid; 1022 1023 scbid = ahd_get_scbptr(ahd); 1024 scb = ahd_lookup_scb(ahd, scbid); 1025 if (scb == NULL) { 1026 ahd_dump_card_state(ahd); 1027 printf("CFG4ISTAT: Free SCB %d referenced", scbid); 1028 AHD_FATAL_ERROR(ahd); 1029 panic("For safety"); 1030 } 1031 ahd_outq(ahd, HADDR, scb->sense_busaddr); 1032 ahd_outw(ahd, HCNT, AHD_SENSE_BUFSIZE); 1033 ahd_outb(ahd, HCNT + 2, 0); 1034 ahd_outb(ahd, SG_CACHE_PRE, SG_LAST_SEG); 1035 ahd_outb(ahd, DFCNTRL, PRELOADEN|SCSIEN|HDMAEN); 1036 break; 1037 } 1038 case ILLEGAL_PHASE: 1039 { 1040 u_int bus_phase; 1041 1042 bus_phase = ahd_inb(ahd, SCSISIGI) & PHASE_MASK; 1043 printf("%s: ILLEGAL_PHASE 0x%x\n", 1044 ahd_name(ahd), bus_phase); 1045 1046 switch (bus_phase) { 1047 case P_DATAOUT: 1048 case P_DATAIN: 1049 case P_DATAOUT_DT: 1050 case P_DATAIN_DT: 1051 case P_MESGOUT: 1052 case P_STATUS: 1053 case P_MESGIN: 1054 ahd_reset_channel(ahd, 'A', /*Initiate Reset*/TRUE); 1055 printf("%s: Issued Bus Reset.\n", ahd_name(ahd)); 1056 AHD_UNCORRECTABLE_ERROR(ahd); 1057 break; 1058 case P_COMMAND: 1059 { 1060 struct ahd_devinfo devinfo; 1061 struct scb *scb; 1062 struct ahd_initiator_tinfo *targ_info; 1063 struct ahd_tmode_tstate *tstate; 1064 struct ahd_transinfo *tinfo; 1065 u_int scbid; 1066 1067 /* 1068 * If a target takes us into the command phase 1069 * assume that it has been externally reset and 1070 * has thus lost our previous packetized negotiation 1071 * agreement. Since we have not sent an identify 1072 * message and may not have fully qualified the 1073 * connection, we change our command to TUR, assert 1074 * ATN and ABORT the task when we go to message in 1075 * phase. The OSM will see the REQUEUE_REQUEST 1076 * status and retry the command. 1077 */ 1078 scbid = ahd_get_scbptr(ahd); 1079 scb = ahd_lookup_scb(ahd, scbid); 1080 if (scb == NULL) { 1081 AHD_CORRECTABLE_ERROR(ahd); 1082 printf("Invalid phase with no valid SCB. " 1083 "Resetting bus.\n"); 1084 ahd_reset_channel(ahd, 'A', 1085 /*Initiate Reset*/TRUE); 1086 break; 1087 } 1088 ahd_compile_devinfo(&devinfo, SCB_GET_OUR_ID(scb), 1089 SCB_GET_TARGET(ahd, scb), 1090 SCB_GET_LUN(scb), 1091 SCB_GET_CHANNEL(ahd, scb), 1092 ROLE_INITIATOR); 1093 targ_info = ahd_fetch_transinfo(ahd, 1094 devinfo.channel, 1095 devinfo.our_scsiid, 1096 devinfo.target, 1097 &tstate); 1098 tinfo = &targ_info->curr; 1099 ahd_set_width(ahd, &devinfo, MSG_EXT_WDTR_BUS_8_BIT, 1100 AHD_TRANS_ACTIVE, /*paused*/TRUE); 1101 ahd_set_syncrate(ahd, &devinfo, /*period*/0, 1102 /*offset*/0, /*ppr_options*/0, 1103 AHD_TRANS_ACTIVE, /*paused*/TRUE); 1104 ahd_outb(ahd, SCB_CDB_STORE, 0); 1105 ahd_outb(ahd, SCB_CDB_STORE+1, 0); 1106 ahd_outb(ahd, SCB_CDB_STORE+2, 0); 1107 ahd_outb(ahd, SCB_CDB_STORE+3, 0); 1108 ahd_outb(ahd, SCB_CDB_STORE+4, 0); 1109 ahd_outb(ahd, SCB_CDB_STORE+5, 0); 1110 ahd_outb(ahd, SCB_CDB_LEN, 6); 1111 scb->hscb->control &= ~(TAG_ENB|SCB_TAG_TYPE); 1112 scb->hscb->control |= MK_MESSAGE; 1113 ahd_outb(ahd, SCB_CONTROL, scb->hscb->control); 1114 ahd_outb(ahd, MSG_OUT, HOST_MSG); 1115 ahd_outb(ahd, SAVED_SCSIID, scb->hscb->scsiid); 1116 /* 1117 * The lun is 0, regardless of the SCB's lun 1118 * as we have not sent an identify message. 1119 */ 1120 ahd_outb(ahd, SAVED_LUN, 0); 1121 ahd_outb(ahd, SEQ_FLAGS, 0); 1122 ahd_assert_atn(ahd); 1123 scb->flags &= ~SCB_PACKETIZED; 1124 scb->flags |= SCB_ABORT|SCB_CMDPHASE_ABORT; 1125 ahd_freeze_devq(ahd, scb); 1126 aic_set_transaction_status(scb, CAM_REQUEUE_REQ); 1127 aic_freeze_scb(scb); 1128 1129 /* 1130 * Allow the sequencer to continue with 1131 * non-pack processing. 1132 */ 1133 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 1134 ahd_outb(ahd, CLRLQOINT1, CLRLQOPHACHGINPKT); 1135 if ((ahd->bugs & AHD_CLRLQO_AUTOCLR_BUG) != 0) { 1136 ahd_outb(ahd, CLRLQOINT1, 0); 1137 } 1138#ifdef AHD_DEBUG 1139 if ((ahd_debug & AHD_SHOW_RECOVERY) != 0) { 1140 ahd_print_path(ahd, scb); 1141 AHD_CORRECTABLE_ERROR(ahd); 1142 printf("Unexpected command phase from " 1143 "packetized target\n"); 1144 } 1145#endif 1146 break; 1147 } 1148 } 1149 break; 1150 } 1151 case CFG4OVERRUN: 1152 { 1153 struct scb *scb; 1154 u_int scb_index; 1155 1156#ifdef AHD_DEBUG 1157 if ((ahd_debug & AHD_SHOW_RECOVERY) != 0) { 1158 printf("%s: CFG4OVERRUN mode = %x\n", ahd_name(ahd), 1159 ahd_inb(ahd, MODE_PTR)); 1160 } 1161#endif 1162 scb_index = ahd_get_scbptr(ahd); 1163 scb = ahd_lookup_scb(ahd, scb_index); 1164 if (scb == NULL) { 1165 /* 1166 * Attempt to transfer to an SCB that is 1167 * not outstanding. 1168 */ 1169 ahd_assert_atn(ahd); 1170 ahd_outb(ahd, MSG_OUT, HOST_MSG); 1171 ahd->msgout_buf[0] = MSG_ABORT_TASK; 1172 ahd->msgout_len = 1; 1173 ahd->msgout_index = 0; 1174 ahd->msg_type = MSG_TYPE_INITIATOR_MSGOUT; 1175 /* 1176 * Clear status received flag to prevent any 1177 * attempt to complete this bogus SCB. 1178 */ 1179 ahd_outb(ahd, SCB_CONTROL, 1180 ahd_inb_scbram(ahd, SCB_CONTROL) 1181 & ~STATUS_RCVD); 1182 } 1183 break; 1184 } 1185 case DUMP_CARD_STATE: 1186 { 1187 ahd_dump_card_state(ahd); 1188 break; 1189 } 1190 case PDATA_REINIT: 1191 { 1192#ifdef AHD_DEBUG 1193 if ((ahd_debug & AHD_SHOW_RECOVERY) != 0) { 1194 printf("%s: PDATA_REINIT - DFCNTRL = 0x%x " 1195 "SG_CACHE_SHADOW = 0x%x\n", 1196 ahd_name(ahd), ahd_inb(ahd, DFCNTRL), 1197 ahd_inb(ahd, SG_CACHE_SHADOW)); 1198 } 1199#endif 1200 ahd_reinitialize_dataptrs(ahd); 1201 break; 1202 } 1203 case HOST_MSG_LOOP: 1204 { 1205 struct ahd_devinfo devinfo; 1206 1207 /* 1208 * The sequencer has encountered a message phase 1209 * that requires host assistance for completion. 1210 * While handling the message phase(s), we will be 1211 * notified by the sequencer after each byte is 1212 * transfered so we can track bus phase changes. 1213 * 1214 * If this is the first time we've seen a HOST_MSG_LOOP 1215 * interrupt, initialize the state of the host message 1216 * loop. 1217 */ 1218 ahd_fetch_devinfo(ahd, &devinfo); 1219 if (ahd->msg_type == MSG_TYPE_NONE) { 1220 struct scb *scb; 1221 u_int scb_index; 1222 u_int bus_phase; 1223 1224 bus_phase = ahd_inb(ahd, SCSISIGI) & PHASE_MASK; 1225 if (bus_phase != P_MESGIN 1226 && bus_phase != P_MESGOUT) { 1227 printf("ahd_intr: HOST_MSG_LOOP bad " 1228 "phase 0x%x\n", bus_phase); 1229 AHD_CORRECTABLE_ERROR(ahd); 1230 /* 1231 * Probably transitioned to bus free before 1232 * we got here. Just punt the message. 1233 */ 1234 ahd_dump_card_state(ahd); 1235 ahd_clear_intstat(ahd); 1236 ahd_restart(ahd); 1237 return; 1238 } 1239 1240 scb_index = ahd_get_scbptr(ahd); 1241 scb = ahd_lookup_scb(ahd, scb_index); 1242 if (devinfo.role == ROLE_INITIATOR) { 1243 if (bus_phase == P_MESGOUT) 1244 ahd_setup_initiator_msgout(ahd, 1245 &devinfo, 1246 scb); 1247 else { 1248 ahd->msg_type = 1249 MSG_TYPE_INITIATOR_MSGIN; 1250 ahd->msgin_index = 0; 1251 } 1252 } 1253#ifdef AHD_TARGET_MODE 1254 else { 1255 if (bus_phase == P_MESGOUT) { 1256 ahd->msg_type = 1257 MSG_TYPE_TARGET_MSGOUT; 1258 ahd->msgin_index = 0; 1259 } 1260 else 1261 ahd_setup_target_msgin(ahd, 1262 &devinfo, 1263 scb); 1264 } 1265#endif 1266 } 1267 1268 ahd_handle_message_phase(ahd); 1269 break; 1270 } 1271 case NO_MATCH: 1272 { 1273 /* Ensure we don't leave the selection hardware on */ 1274 AHD_ASSERT_MODES(ahd, AHD_MODE_SCSI_MSK, AHD_MODE_SCSI_MSK); 1275 ahd_outb(ahd, SCSISEQ0, ahd_inb(ahd, SCSISEQ0) & ~ENSELO); 1276 1277 printf("%s:%c:%d: no active SCB for reconnecting " 1278 "target - issuing BUS DEVICE RESET\n", 1279 ahd_name(ahd), 'A', ahd_inb(ahd, SELID) >> 4); 1280 printf("SAVED_SCSIID == 0x%x, SAVED_LUN == 0x%x, " 1281 "REG0 == 0x%x ACCUM = 0x%x\n", 1282 ahd_inb(ahd, SAVED_SCSIID), ahd_inb(ahd, SAVED_LUN), 1283 ahd_inw(ahd, REG0), ahd_inb(ahd, ACCUM)); 1284 printf("SEQ_FLAGS == 0x%x, SCBPTR == 0x%x, BTT == 0x%x, " 1285 "SINDEX == 0x%x\n", 1286 ahd_inb(ahd, SEQ_FLAGS), ahd_get_scbptr(ahd), 1287 ahd_find_busy_tcl(ahd, 1288 BUILD_TCL(ahd_inb(ahd, SAVED_SCSIID), 1289 ahd_inb(ahd, SAVED_LUN))), 1290 ahd_inw(ahd, SINDEX)); 1291 printf("SELID == 0x%x, SCB_SCSIID == 0x%x, SCB_LUN == 0x%x, " 1292 "SCB_CONTROL == 0x%x\n", 1293 ahd_inb(ahd, SELID), ahd_inb_scbram(ahd, SCB_SCSIID), 1294 ahd_inb_scbram(ahd, SCB_LUN), 1295 ahd_inb_scbram(ahd, SCB_CONTROL)); 1296 printf("SCSIBUS[0] == 0x%x, SCSISIGI == 0x%x\n", 1297 ahd_inb(ahd, SCSIBUS), ahd_inb(ahd, SCSISIGI)); 1298 printf("SXFRCTL0 == 0x%x\n", ahd_inb(ahd, SXFRCTL0)); 1299 printf("SEQCTL0 == 0x%x\n", ahd_inb(ahd, SEQCTL0)); 1300 ahd_dump_card_state(ahd); 1301 ahd->msgout_buf[0] = MSG_BUS_DEV_RESET; 1302 ahd->msgout_len = 1; 1303 ahd->msgout_index = 0; 1304 ahd->msg_type = MSG_TYPE_INITIATOR_MSGOUT; 1305 ahd_outb(ahd, MSG_OUT, HOST_MSG); 1306 ahd_assert_atn(ahd); 1307 break; 1308 } 1309 case PROTO_VIOLATION: 1310 { 1311 ahd_handle_proto_violation(ahd); 1312 break; 1313 } 1314 case IGN_WIDE_RES: 1315 { 1316 struct ahd_devinfo devinfo; 1317 1318 ahd_fetch_devinfo(ahd, &devinfo); 1319 ahd_handle_ign_wide_residue(ahd, &devinfo); 1320 break; 1321 } 1322 case BAD_PHASE: 1323 { 1324 u_int lastphase; 1325 1326 lastphase = ahd_inb(ahd, LASTPHASE); 1327 printf("%s:%c:%d: unknown scsi bus phase %x, " 1328 "lastphase = 0x%x. Attempting to continue\n", 1329 ahd_name(ahd), 'A', 1330 SCSIID_TARGET(ahd, ahd_inb(ahd, SAVED_SCSIID)), 1331 lastphase, ahd_inb(ahd, SCSISIGI)); 1332 AHD_CORRECTABLE_ERROR(ahd); 1333 break; 1334 } 1335 case MISSED_BUSFREE: 1336 { 1337 u_int lastphase; 1338 1339 lastphase = ahd_inb(ahd, LASTPHASE); 1340 printf("%s:%c:%d: Missed busfree. " 1341 "Lastphase = 0x%x, Curphase = 0x%x\n", 1342 ahd_name(ahd), 'A', 1343 SCSIID_TARGET(ahd, ahd_inb(ahd, SAVED_SCSIID)), 1344 lastphase, ahd_inb(ahd, SCSISIGI)); 1345 AHD_CORRECTABLE_ERROR(ahd); 1346 ahd_restart(ahd); 1347 return; 1348 } 1349 case DATA_OVERRUN: 1350 { 1351 /* 1352 * When the sequencer detects an overrun, it 1353 * places the controller in "BITBUCKET" mode 1354 * and allows the target to complete its transfer. 1355 * Unfortunately, none of the counters get updated 1356 * when the controller is in this mode, so we have 1357 * no way of knowing how large the overrun was. 1358 */ 1359 struct scb *scb; 1360 u_int scbindex; 1361#ifdef AHD_DEBUG 1362 u_int lastphase; 1363#endif 1364 1365 scbindex = ahd_get_scbptr(ahd); 1366 scb = ahd_lookup_scb(ahd, scbindex); 1367#ifdef AHD_DEBUG 1368 lastphase = ahd_inb(ahd, LASTPHASE); 1369 if ((ahd_debug & AHD_SHOW_RECOVERY) != 0) { 1370 ahd_print_path(ahd, scb); 1371 printf("data overrun detected %s. Tag == 0x%x.\n", 1372 ahd_lookup_phase_entry(lastphase)->phasemsg, 1373 SCB_GET_TAG(scb)); 1374 ahd_print_path(ahd, scb); 1375 printf("%s seen Data Phase. Length = %ld. " 1376 "NumSGs = %d.\n", 1377 ahd_inb(ahd, SEQ_FLAGS) & DPHASE 1378 ? "Have" : "Haven't", 1379 aic_get_transfer_length(scb), scb->sg_count); 1380 ahd_dump_sglist(scb); 1381 } 1382#endif 1383 1384 /* 1385 * Set this and it will take effect when the 1386 * target does a command complete. 1387 */ 1388 ahd_freeze_devq(ahd, scb); 1389 aic_set_transaction_status(scb, CAM_DATA_RUN_ERR); 1390 aic_freeze_scb(scb); 1391 break; 1392 } 1393 case MKMSG_FAILED: 1394 { 1395 struct ahd_devinfo devinfo; 1396 struct scb *scb; 1397 u_int scbid; 1398 1399 ahd_fetch_devinfo(ahd, &devinfo); 1400 printf("%s:%c:%d:%d: Attempt to issue message failed\n", 1401 ahd_name(ahd), devinfo.channel, devinfo.target, 1402 devinfo.lun); 1403 scbid = ahd_get_scbptr(ahd); 1404 scb = ahd_lookup_scb(ahd, scbid); 1405 AHD_CORRECTABLE_ERROR(ahd); 1406 if (scb != NULL 1407 && (scb->flags & SCB_RECOVERY_SCB) != 0) 1408 /* 1409 * Ensure that we didn't put a second instance of this 1410 * SCB into the QINFIFO. 1411 */ 1412 ahd_search_qinfifo(ahd, SCB_GET_TARGET(ahd, scb), 1413 SCB_GET_CHANNEL(ahd, scb), 1414 SCB_GET_LUN(scb), SCB_GET_TAG(scb), 1415 ROLE_INITIATOR, /*status*/0, 1416 SEARCH_REMOVE); 1417 ahd_outb(ahd, SCB_CONTROL, 1418 ahd_inb_scbram(ahd, SCB_CONTROL) & ~MK_MESSAGE); 1419 break; 1420 } 1421 case TASKMGMT_FUNC_COMPLETE: 1422 { 1423 u_int scbid; 1424 struct scb *scb; 1425 1426 scbid = ahd_get_scbptr(ahd); 1427 scb = ahd_lookup_scb(ahd, scbid); 1428 if (scb != NULL) { 1429 u_int lun; 1430 u_int tag; 1431 cam_status error; 1432 1433 ahd_print_path(ahd, scb); 1434 printf("Task Management Func 0x%x Complete\n", 1435 scb->hscb->task_management); 1436 lun = CAM_LUN_WILDCARD; 1437 tag = SCB_LIST_NULL; 1438 1439 switch (scb->hscb->task_management) { 1440 case SIU_TASKMGMT_ABORT_TASK: 1441 tag = SCB_GET_TAG(scb); 1442 case SIU_TASKMGMT_ABORT_TASK_SET: 1443 case SIU_TASKMGMT_CLEAR_TASK_SET: 1444 lun = scb->hscb->lun; 1445 error = CAM_REQ_ABORTED; 1446 ahd_abort_scbs(ahd, SCB_GET_TARGET(ahd, scb), 1447 'A', lun, tag, ROLE_INITIATOR, 1448 error); 1449 break; 1450 case SIU_TASKMGMT_LUN_RESET: 1451 lun = scb->hscb->lun; 1452 case SIU_TASKMGMT_TARGET_RESET: 1453 { 1454 struct ahd_devinfo devinfo; 1455 1456 ahd_scb_devinfo(ahd, &devinfo, scb); 1457 error = CAM_BDR_SENT; 1458 ahd_handle_devreset(ahd, &devinfo, lun, 1459 CAM_BDR_SENT, 1460 lun != CAM_LUN_WILDCARD 1461 ? "Lun Reset" 1462 : "Target Reset", 1463 /*verbose_level*/0); 1464 break; 1465 } 1466 default: 1467 panic("Unexpected TaskMgmt Func\n"); 1468 break; 1469 } 1470 } 1471 break; 1472 } 1473 case TASKMGMT_CMD_CMPLT_OKAY: 1474 { 1475 u_int scbid; 1476 struct scb *scb; 1477 1478 /* 1479 * An ABORT TASK TMF failed to be delivered before 1480 * the targeted command completed normally. 1481 */ 1482 scbid = ahd_get_scbptr(ahd); 1483 scb = ahd_lookup_scb(ahd, scbid); 1484 if (scb != NULL) { 1485 /* 1486 * Remove the second instance of this SCB from 1487 * the QINFIFO if it is still there. 1488 */ 1489 ahd_print_path(ahd, scb); 1490 printf("SCB completes before TMF\n"); 1491 /* 1492 * Handle losing the race. Wait until any 1493 * current selection completes. We will then 1494 * set the TMF back to zero in this SCB so that 1495 * the sequencer doesn't bother to issue another 1496 * sequencer interrupt for its completion. 1497 */ 1498 while ((ahd_inb(ahd, SCSISEQ0) & ENSELO) != 0 1499 && (ahd_inb(ahd, SSTAT0) & SELDO) == 0 1500 && (ahd_inb(ahd, SSTAT1) & SELTO) == 0) 1501 ; 1502 ahd_outb(ahd, SCB_TASK_MANAGEMENT, 0); 1503 ahd_search_qinfifo(ahd, SCB_GET_TARGET(ahd, scb), 1504 SCB_GET_CHANNEL(ahd, scb), 1505 SCB_GET_LUN(scb), SCB_GET_TAG(scb), 1506 ROLE_INITIATOR, /*status*/0, 1507 SEARCH_REMOVE); 1508 } 1509 break; 1510 } 1511 case TRACEPOINT0: 1512 case TRACEPOINT1: 1513 case TRACEPOINT2: 1514 case TRACEPOINT3: 1515 printf("%s: Tracepoint %d\n", ahd_name(ahd), 1516 seqintcode - TRACEPOINT0); 1517 break; 1518 case NO_SEQINT: 1519 break; 1520 case SAW_HWERR: 1521 ahd_handle_hwerrint(ahd); 1522 break; 1523 default: 1524 printf("%s: Unexpected SEQINTCODE %d\n", ahd_name(ahd), 1525 seqintcode); 1526 break; 1527 } 1528 /* 1529 * The sequencer is paused immediately on 1530 * a SEQINT, so we should restart it when 1531 * we're done. 1532 */ 1533 ahd_unpause(ahd); 1534} 1535 1536void 1537ahd_handle_scsiint(struct ahd_softc *ahd, u_int intstat) 1538{ 1539 struct scb *scb; 1540 u_int status0; 1541 u_int status3; 1542 u_int status; 1543 u_int lqistat1; 1544 u_int lqostat0; 1545 u_int scbid; 1546 u_int busfreetime; 1547 1548 ahd_update_modes(ahd); 1549 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 1550 1551 status3 = ahd_inb(ahd, SSTAT3) & (NTRAMPERR|OSRAMPERR); 1552 status0 = ahd_inb(ahd, SSTAT0) & (IOERR|OVERRUN|SELDI|SELDO); 1553 status = ahd_inb(ahd, SSTAT1) & (SELTO|SCSIRSTI|BUSFREE|SCSIPERR); 1554 lqistat1 = ahd_inb(ahd, LQISTAT1); 1555 lqostat0 = ahd_inb(ahd, LQOSTAT0); 1556 busfreetime = ahd_inb(ahd, SSTAT2) & BUSFREETIME; 1557 if ((status0 & (SELDI|SELDO)) != 0) { 1558 u_int simode0; 1559 1560 ahd_set_modes(ahd, AHD_MODE_CFG, AHD_MODE_CFG); 1561 simode0 = ahd_inb(ahd, SIMODE0); 1562 status0 &= simode0 & (IOERR|OVERRUN|SELDI|SELDO); 1563 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 1564 } 1565 scbid = ahd_get_scbptr(ahd); 1566 scb = ahd_lookup_scb(ahd, scbid); 1567 if (scb != NULL 1568 && (ahd_inb(ahd, SEQ_FLAGS) & NOT_IDENTIFIED) != 0) 1569 scb = NULL; 1570 1571 if ((status0 & IOERR) != 0) { 1572 u_int now_lvd; 1573 1574 now_lvd = ahd_inb(ahd, SBLKCTL) & ENAB40; 1575 printf("%s: Transceiver State Has Changed to %s mode\n", 1576 ahd_name(ahd), now_lvd ? "LVD" : "SE"); 1577 ahd_outb(ahd, CLRSINT0, CLRIOERR); 1578 /* 1579 * A change in I/O mode is equivalent to a bus reset. 1580 */ 1581 ahd_reset_channel(ahd, 'A', /*Initiate Reset*/TRUE); 1582 ahd_pause(ahd); 1583 ahd_setup_iocell_workaround(ahd); 1584 ahd_unpause(ahd); 1585 } else if ((status0 & OVERRUN) != 0) { 1586 1587 printf("%s: SCSI offset overrun detected. Resetting bus.\n", 1588 ahd_name(ahd)); 1589 AHD_CORRECTABLE_ERROR(ahd); 1590 ahd_reset_channel(ahd, 'A', /*Initiate Reset*/TRUE); 1591 } else if ((status & SCSIRSTI) != 0) { 1592 1593 printf("%s: Someone reset channel A\n", ahd_name(ahd)); 1594 ahd_reset_channel(ahd, 'A', /*Initiate Reset*/FALSE); 1595 AHD_UNCORRECTABLE_ERROR(ahd); 1596 } else if ((status & SCSIPERR) != 0) { 1597 1598 /* Make sure the sequencer is in a safe location. */ 1599 ahd_clear_critical_section(ahd); 1600 1601 ahd_handle_transmission_error(ahd); 1602 } else if (lqostat0 != 0) { 1603 1604 printf("%s: lqostat0 == 0x%x!\n", ahd_name(ahd), lqostat0); 1605 ahd_outb(ahd, CLRLQOINT0, lqostat0); 1606 if ((ahd->bugs & AHD_CLRLQO_AUTOCLR_BUG) != 0) 1607 ahd_outb(ahd, CLRLQOINT1, 0); 1608 } else if ((status & SELTO) != 0) { 1609 u_int scbid; 1610 1611 /* Stop the selection */ 1612 ahd_outb(ahd, SCSISEQ0, 0); 1613 1614 /* Make sure the sequencer is in a safe location. */ 1615 ahd_clear_critical_section(ahd); 1616 1617 /* No more pending messages */ 1618 ahd_clear_msg_state(ahd); 1619 1620 /* Clear interrupt state */ 1621 ahd_outb(ahd, CLRSINT1, CLRSELTIMEO|CLRBUSFREE|CLRSCSIPERR); 1622 1623 /* 1624 * Although the driver does not care about the 1625 * 'Selection in Progress' status bit, the busy 1626 * LED does. SELINGO is only cleared by a sucessfull 1627 * selection, so we must manually clear it to insure 1628 * the LED turns off just incase no future successful 1629 * selections occur (e.g. no devices on the bus). 1630 */ 1631 ahd_outb(ahd, CLRSINT0, CLRSELINGO); 1632 1633 scbid = ahd_inw(ahd, WAITING_TID_HEAD); 1634 scb = ahd_lookup_scb(ahd, scbid); 1635 if (scb == NULL) { 1636 printf("%s: ahd_intr - referenced scb not " 1637 "valid during SELTO scb(0x%x)\n", 1638 ahd_name(ahd), scbid); 1639 ahd_dump_card_state(ahd); 1640 AHD_UNCORRECTABLE_ERROR(ahd); 1641 } else { 1642 struct ahd_devinfo devinfo; 1643#ifdef AHD_DEBUG 1644 if ((ahd_debug & AHD_SHOW_SELTO) != 0) { 1645 ahd_print_path(ahd, scb); 1646 printf("Saw Selection Timeout for SCB 0x%x\n", 1647 scbid); 1648 } 1649#endif 1650 ahd_scb_devinfo(ahd, &devinfo, scb); 1651 aic_set_transaction_status(scb, CAM_SEL_TIMEOUT); 1652 ahd_freeze_devq(ahd, scb); 1653 1654 /* 1655 * Cancel any pending transactions on the device 1656 * now that it seems to be missing. This will 1657 * also revert us to async/narrow transfers until 1658 * we can renegotiate with the device. 1659 */ 1660 ahd_handle_devreset(ahd, &devinfo, 1661 CAM_LUN_WILDCARD, 1662 CAM_SEL_TIMEOUT, 1663 "Selection Timeout", 1664 /*verbose_level*/1); 1665 } 1666 ahd_outb(ahd, CLRINT, CLRSCSIINT); 1667 ahd_iocell_first_selection(ahd); 1668 ahd_unpause(ahd); 1669 } else if ((status0 & (SELDI|SELDO)) != 0) { 1670 1671 ahd_iocell_first_selection(ahd); 1672 ahd_unpause(ahd); 1673 } else if (status3 != 0) { 1674 printf("%s: SCSI Cell parity error SSTAT3 == 0x%x\n", 1675 ahd_name(ahd), status3); 1676 AHD_CORRECTABLE_ERROR(ahd); 1677 ahd_outb(ahd, CLRSINT3, status3); 1678 } else if ((lqistat1 & (LQIPHASE_LQ|LQIPHASE_NLQ)) != 0) { 1679 1680 /* Make sure the sequencer is in a safe location. */ 1681 ahd_clear_critical_section(ahd); 1682 1683 ahd_handle_lqiphase_error(ahd, lqistat1); 1684 } else if ((lqistat1 & LQICRCI_NLQ) != 0) { 1685 /* 1686 * This status can be delayed during some 1687 * streaming operations. The SCSIPHASE 1688 * handler has already dealt with this case 1689 * so just clear the error. 1690 */ 1691 ahd_outb(ahd, CLRLQIINT1, CLRLQICRCI_NLQ); 1692 } else if ((status & BUSFREE) != 0 1693 || (lqistat1 & LQOBUSFREE) != 0) { 1694 u_int lqostat1; 1695 int restart; 1696 int clear_fifo; 1697 int packetized; 1698 u_int mode; 1699 1700 /* 1701 * Clear our selection hardware as soon as possible. 1702 * We may have an entry in the waiting Q for this target, 1703 * that is affected by this busfree and we don't want to 1704 * go about selecting the target while we handle the event. 1705 */ 1706 ahd_outb(ahd, SCSISEQ0, 0); 1707 1708 /* Make sure the sequencer is in a safe location. */ 1709 ahd_clear_critical_section(ahd); 1710 1711 /* 1712 * Determine what we were up to at the time of 1713 * the busfree. 1714 */ 1715 mode = AHD_MODE_SCSI; 1716 busfreetime = ahd_inb(ahd, SSTAT2) & BUSFREETIME; 1717 lqostat1 = ahd_inb(ahd, LQOSTAT1); 1718 switch (busfreetime) { 1719 case BUSFREE_DFF0: 1720 case BUSFREE_DFF1: 1721 { 1722 u_int scbid; 1723 struct scb *scb; 1724 1725 mode = busfreetime == BUSFREE_DFF0 1726 ? AHD_MODE_DFF0 : AHD_MODE_DFF1; 1727 ahd_set_modes(ahd, mode, mode); 1728 scbid = ahd_get_scbptr(ahd); 1729 scb = ahd_lookup_scb(ahd, scbid); 1730 if (scb == NULL) { 1731 printf("%s: Invalid SCB %d in DFF%d " 1732 "during unexpected busfree\n", 1733 ahd_name(ahd), scbid, mode); 1734 packetized = 0; 1735 AHD_CORRECTABLE_ERROR(ahd); 1736 } else 1737 packetized = (scb->flags & SCB_PACKETIZED) != 0; 1738 clear_fifo = 1; 1739 break; 1740 } 1741 case BUSFREE_LQO: 1742 clear_fifo = 0; 1743 packetized = 1; 1744 break; 1745 default: 1746 clear_fifo = 0; 1747 packetized = (lqostat1 & LQOBUSFREE) != 0; 1748 if (!packetized 1749 && ahd_inb(ahd, LASTPHASE) == P_BUSFREE 1750 && (ahd_inb(ahd, SSTAT0) & SELDI) == 0 1751 && ((ahd_inb(ahd, SSTAT0) & SELDO) == 0 1752 || (ahd_inb(ahd, SCSISEQ0) & ENSELO) == 0)) 1753 /* 1754 * Assume packetized if we are not 1755 * on the bus in a non-packetized 1756 * capacity and any pending selection 1757 * was a packetized selection. 1758 */ 1759 packetized = 1; 1760 break; 1761 } 1762 1763#ifdef AHD_DEBUG 1764 if ((ahd_debug & AHD_SHOW_MISC) != 0) 1765 printf("Saw Busfree. Busfreetime = 0x%x.\n", 1766 busfreetime); 1767#endif 1768 /* 1769 * Busfrees that occur in non-packetized phases are 1770 * handled by the nonpkt_busfree handler. 1771 */ 1772 if (packetized && ahd_inb(ahd, LASTPHASE) == P_BUSFREE) { 1773 restart = ahd_handle_pkt_busfree(ahd, busfreetime); 1774 } else { 1775 packetized = 0; 1776 restart = ahd_handle_nonpkt_busfree(ahd); 1777 } 1778 /* 1779 * Clear the busfree interrupt status. The setting of 1780 * the interrupt is a pulse, so in a perfect world, we 1781 * would not need to muck with the ENBUSFREE logic. This 1782 * would ensure that if the bus moves on to another 1783 * connection, busfree protection is still in force. If 1784 * BUSFREEREV is broken, however, we must manually clear 1785 * the ENBUSFREE if the busfree occurred during a non-pack 1786 * connection so that we don't get false positives during 1787 * future, packetized, connections. 1788 */ 1789 ahd_outb(ahd, CLRSINT1, CLRBUSFREE); 1790 if (packetized == 0 1791 && (ahd->bugs & AHD_BUSFREEREV_BUG) != 0) 1792 ahd_outb(ahd, SIMODE1, 1793 ahd_inb(ahd, SIMODE1) & ~ENBUSFREE); 1794 1795 if (clear_fifo) 1796 ahd_clear_fifo(ahd, mode); 1797 1798 ahd_clear_msg_state(ahd); 1799 ahd_outb(ahd, CLRINT, CLRSCSIINT); 1800 if (restart) { 1801 ahd_restart(ahd); 1802 } else { 1803 ahd_unpause(ahd); 1804 } 1805 } else { 1806 printf("%s: Missing case in ahd_handle_scsiint. status = %x\n", 1807 ahd_name(ahd), status); 1808 ahd_dump_card_state(ahd); 1809 ahd_clear_intstat(ahd); 1810 ahd_unpause(ahd); 1811 } 1812} 1813 1814static void 1815ahd_handle_transmission_error(struct ahd_softc *ahd) 1816{ 1817 struct scb *scb; 1818 u_int scbid; 1819 u_int lqistat1; 1820 u_int lqistat2; 1821 u_int msg_out; 1822 u_int curphase; 1823 u_int lastphase; 1824 u_int perrdiag; 1825 u_int cur_col; 1826 int silent; 1827 1828 scb = NULL; 1829 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 1830 lqistat1 = ahd_inb(ahd, LQISTAT1) & ~(LQIPHASE_LQ|LQIPHASE_NLQ); 1831 lqistat2 = ahd_inb(ahd, LQISTAT2); 1832 if ((lqistat1 & (LQICRCI_NLQ|LQICRCI_LQ)) == 0 1833 && (ahd->bugs & AHD_NLQICRC_DELAYED_BUG) != 0) { 1834 u_int lqistate; 1835 1836 ahd_set_modes(ahd, AHD_MODE_CFG, AHD_MODE_CFG); 1837 lqistate = ahd_inb(ahd, LQISTATE); 1838 if ((lqistate >= 0x1E && lqistate <= 0x24) 1839 || (lqistate == 0x29)) { 1840#ifdef AHD_DEBUG 1841 if ((ahd_debug & AHD_SHOW_RECOVERY) != 0) { 1842 printf("%s: NLQCRC found via LQISTATE\n", 1843 ahd_name(ahd)); 1844 } 1845#endif 1846 lqistat1 |= LQICRCI_NLQ; 1847 } 1848 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 1849 } 1850 1851 ahd_outb(ahd, CLRLQIINT1, lqistat1); 1852 lastphase = ahd_inb(ahd, LASTPHASE); 1853 curphase = ahd_inb(ahd, SCSISIGI) & PHASE_MASK; 1854 perrdiag = ahd_inb(ahd, PERRDIAG); 1855 msg_out = MSG_INITIATOR_DET_ERR; 1856 ahd_outb(ahd, CLRSINT1, CLRSCSIPERR); 1857 1858 /* 1859 * Try to find the SCB associated with this error. 1860 */ 1861 silent = FALSE; 1862 if (lqistat1 == 0 1863 || (lqistat1 & LQICRCI_NLQ) != 0) { 1864 if ((lqistat1 & (LQICRCI_NLQ|LQIOVERI_NLQ)) != 0) 1865 ahd_set_active_fifo(ahd); 1866 scbid = ahd_get_scbptr(ahd); 1867 scb = ahd_lookup_scb(ahd, scbid); 1868 if (scb != NULL && SCB_IS_SILENT(scb)) 1869 silent = TRUE; 1870 } 1871 1872 cur_col = 0; 1873 if (silent == FALSE) { 1874 printf("%s: Transmission error detected\n", ahd_name(ahd)); 1875 ahd_lqistat1_print(lqistat1, &cur_col, 50); 1876 ahd_lastphase_print(lastphase, &cur_col, 50); 1877 ahd_scsisigi_print(curphase, &cur_col, 50); 1878 ahd_perrdiag_print(perrdiag, &cur_col, 50); 1879 printf("\n"); 1880 AHD_CORRECTABLE_ERROR(ahd); 1881 ahd_dump_card_state(ahd); 1882 } 1883 1884 if ((lqistat1 & (LQIOVERI_LQ|LQIOVERI_NLQ)) != 0) { 1885 if (silent == FALSE) { 1886 printf("%s: Gross protocol error during incoming " 1887 "packet. lqistat1 == 0x%x. Resetting bus.\n", 1888 ahd_name(ahd), lqistat1); 1889 AHD_UNCORRECTABLE_ERROR(ahd); 1890 } 1891 ahd_reset_channel(ahd, 'A', /*Initiate Reset*/TRUE); 1892 return; 1893 } else if ((lqistat1 & LQICRCI_LQ) != 0) { 1894 /* 1895 * A CRC error has been detected on an incoming LQ. 1896 * The bus is currently hung on the last ACK. 1897 * Hit LQIRETRY to release the last ack, and 1898 * wait for the sequencer to determine that ATNO 1899 * is asserted while in message out to take us 1900 * to our host message loop. No NONPACKREQ or 1901 * LQIPHASE type errors will occur in this 1902 * scenario. After this first LQIRETRY, the LQI 1903 * manager will be in ISELO where it will 1904 * happily sit until another packet phase begins. 1905 * Unexpected bus free detection is enabled 1906 * through any phases that occur after we release 1907 * this last ack until the LQI manager sees a 1908 * packet phase. This implies we may have to 1909 * ignore a perfectly valid "unexected busfree" 1910 * after our "initiator detected error" message is 1911 * sent. A busfree is the expected response after 1912 * we tell the target that it's L_Q was corrupted. 1913 * (SPI4R09 10.7.3.3.3) 1914 */ 1915 ahd_outb(ahd, LQCTL2, LQIRETRY); 1916 printf("LQIRetry for LQICRCI_LQ to release ACK\n"); 1917 AHD_CORRECTABLE_ERROR(ahd); 1918 } else if ((lqistat1 & LQICRCI_NLQ) != 0) { 1919 /* 1920 * We detected a CRC error in a NON-LQ packet. 1921 * The hardware has varying behavior in this situation 1922 * depending on whether this packet was part of a 1923 * stream or not. 1924 * 1925 * PKT by PKT mode: 1926 * The hardware has already acked the complete packet. 1927 * If the target honors our outstanding ATN condition, 1928 * we should be (or soon will be) in MSGOUT phase. 1929 * This will trigger the LQIPHASE_LQ status bit as the 1930 * hardware was expecting another LQ. Unexpected 1931 * busfree detection is enabled. Once LQIPHASE_LQ is 1932 * true (first entry into host message loop is much 1933 * the same), we must clear LQIPHASE_LQ and hit 1934 * LQIRETRY so the hardware is ready to handle 1935 * a future LQ. NONPACKREQ will not be asserted again 1936 * once we hit LQIRETRY until another packet is 1937 * processed. The target may either go busfree 1938 * or start another packet in response to our message. 1939 * 1940 * Read Streaming P0 asserted: 1941 * If we raise ATN and the target completes the entire 1942 * stream (P0 asserted during the last packet), the 1943 * hardware will ack all data and return to the ISTART 1944 * state. When the target reponds to our ATN condition, 1945 * LQIPHASE_LQ will be asserted. We should respond to 1946 * this with an LQIRETRY to prepare for any future 1947 * packets. NONPACKREQ will not be asserted again 1948 * once we hit LQIRETRY until another packet is 1949 * processed. The target may either go busfree or 1950 * start another packet in response to our message. 1951 * Busfree detection is enabled. 1952 * 1953 * Read Streaming P0 not asserted: 1954 * If we raise ATN and the target transitions to 1955 * MSGOUT in or after a packet where P0 is not 1956 * asserted, the hardware will assert LQIPHASE_NLQ. 1957 * We should respond to the LQIPHASE_NLQ with an 1958 * LQIRETRY. Should the target stay in a non-pkt 1959 * phase after we send our message, the hardware 1960 * will assert LQIPHASE_LQ. Recovery is then just as 1961 * listed above for the read streaming with P0 asserted. 1962 * Busfree detection is enabled. 1963 */ 1964 if (silent == FALSE) 1965 printf("LQICRC_NLQ\n"); 1966 if (scb == NULL) { 1967 printf("%s: No SCB valid for LQICRC_NLQ. " 1968 "Resetting bus\n", ahd_name(ahd)); 1969 AHD_UNCORRECTABLE_ERROR(ahd); 1970 ahd_reset_channel(ahd, 'A', /*Initiate Reset*/TRUE); 1971 return; 1972 } 1973 } else if ((lqistat1 & LQIBADLQI) != 0) { 1974 printf("Need to handle BADLQI!\n"); 1975 ahd_reset_channel(ahd, 'A', /*Initiate Reset*/TRUE); 1976 return; 1977 } else if ((perrdiag & (PARITYERR|PREVPHASE)) == PARITYERR) { 1978 if ((curphase & ~P_DATAIN_DT) != 0) { 1979 /* Ack the byte. So we can continue. */ 1980 if (silent == FALSE) 1981 printf("Acking %s to clear perror\n", 1982 ahd_lookup_phase_entry(curphase)->phasemsg); 1983 ahd_inb(ahd, SCSIDAT); 1984 } 1985 1986 if (curphase == P_MESGIN) 1987 msg_out = MSG_PARITY_ERROR; 1988 } 1989 1990 /* 1991 * We've set the hardware to assert ATN if we 1992 * get a parity error on "in" phases, so all we 1993 * need to do is stuff the message buffer with 1994 * the appropriate message. "In" phases have set 1995 * mesg_out to something other than MSG_NOP. 1996 */ 1997 ahd->send_msg_perror = msg_out; 1998 if (scb != NULL && msg_out == MSG_INITIATOR_DET_ERR) 1999 scb->flags |= SCB_TRANSMISSION_ERROR; 2000 ahd_outb(ahd, MSG_OUT, HOST_MSG); 2001 ahd_outb(ahd, CLRINT, CLRSCSIINT); 2002 ahd_unpause(ahd); 2003} 2004 2005static void 2006ahd_handle_lqiphase_error(struct ahd_softc *ahd, u_int lqistat1) 2007{ 2008 /* 2009 * Clear the sources of the interrupts. 2010 */ 2011 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 2012 ahd_outb(ahd, CLRLQIINT1, lqistat1); 2013 2014 /* 2015 * If the "illegal" phase changes were in response 2016 * to our ATN to flag a CRC error, AND we ended up 2017 * on packet boundaries, clear the error, restart the 2018 * LQI manager as appropriate, and go on our merry 2019 * way toward sending the message. Otherwise, reset 2020 * the bus to clear the error. 2021 */ 2022 ahd_set_active_fifo(ahd); 2023 if ((ahd_inb(ahd, SCSISIGO) & ATNO) != 0 2024 && (ahd_inb(ahd, MDFFSTAT) & DLZERO) != 0) { 2025 if ((lqistat1 & LQIPHASE_LQ) != 0) { 2026 printf("LQIRETRY for LQIPHASE_LQ\n"); 2027 AHD_CORRECTABLE_ERROR(ahd); 2028 ahd_outb(ahd, LQCTL2, LQIRETRY); 2029 } else if ((lqistat1 & LQIPHASE_NLQ) != 0) { 2030 printf("LQIRETRY for LQIPHASE_NLQ\n"); 2031 AHD_CORRECTABLE_ERROR(ahd); 2032 ahd_outb(ahd, LQCTL2, LQIRETRY); 2033 } else 2034 panic("ahd_handle_lqiphase_error: No phase errors\n"); 2035 ahd_dump_card_state(ahd); 2036 ahd_outb(ahd, CLRINT, CLRSCSIINT); 2037 ahd_unpause(ahd); 2038 } else { 2039 printf("Reseting Channel for LQI Phase error\n"); 2040 AHD_CORRECTABLE_ERROR(ahd); 2041 ahd_dump_card_state(ahd); 2042 ahd_reset_channel(ahd, 'A', /*Initiate Reset*/TRUE); 2043 } 2044} 2045 2046/* 2047 * Packetized unexpected or expected busfree. 2048 * Entered in mode based on busfreetime. 2049 */ 2050static int 2051ahd_handle_pkt_busfree(struct ahd_softc *ahd, u_int busfreetime) 2052{ 2053 u_int lqostat1; 2054 2055 AHD_ASSERT_MODES(ahd, ~(AHD_MODE_UNKNOWN_MSK|AHD_MODE_CFG_MSK), 2056 ~(AHD_MODE_UNKNOWN_MSK|AHD_MODE_CFG_MSK)); 2057 lqostat1 = ahd_inb(ahd, LQOSTAT1); 2058 if ((lqostat1 & LQOBUSFREE) != 0) { 2059 struct scb *scb; 2060 u_int scbid; 2061 u_int saved_scbptr; 2062 u_int waiting_h; 2063 u_int waiting_t; 2064 u_int next; 2065 2066 /* 2067 * The LQO manager detected an unexpected busfree 2068 * either: 2069 * 2070 * 1) During an outgoing LQ. 2071 * 2) After an outgoing LQ but before the first 2072 * REQ of the command packet. 2073 * 3) During an outgoing command packet. 2074 * 2075 * In all cases, CURRSCB is pointing to the 2076 * SCB that encountered the failure. Clean 2077 * up the queue, clear SELDO and LQOBUSFREE, 2078 * and allow the sequencer to restart the select 2079 * out at its lesure. 2080 */ 2081 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 2082 scbid = ahd_inw(ahd, CURRSCB); 2083 scb = ahd_lookup_scb(ahd, scbid); 2084 if (scb == NULL) 2085 panic("SCB not valid during LQOBUSFREE"); 2086 /* 2087 * Clear the status. 2088 */ 2089 ahd_outb(ahd, CLRLQOINT1, CLRLQOBUSFREE); 2090 if ((ahd->bugs & AHD_CLRLQO_AUTOCLR_BUG) != 0) 2091 ahd_outb(ahd, CLRLQOINT1, 0); 2092 ahd_outb(ahd, SCSISEQ0, ahd_inb(ahd, SCSISEQ0) & ~ENSELO); 2093 ahd_flush_device_writes(ahd); 2094 ahd_outb(ahd, CLRSINT0, CLRSELDO); 2095 2096 /* 2097 * Return the LQO manager to its idle loop. It will 2098 * not do this automatically if the busfree occurs 2099 * after the first REQ of either the LQ or command 2100 * packet or between the LQ and command packet. 2101 */ 2102 ahd_outb(ahd, LQCTL2, ahd_inb(ahd, LQCTL2) | LQOTOIDLE); 2103 2104 /* 2105 * Update the waiting for selection queue so 2106 * we restart on the correct SCB. 2107 */ 2108 waiting_h = ahd_inw(ahd, WAITING_TID_HEAD); 2109 saved_scbptr = ahd_get_scbptr(ahd); 2110 if (waiting_h != scbid) { 2111 2112 ahd_outw(ahd, WAITING_TID_HEAD, scbid); 2113 waiting_t = ahd_inw(ahd, WAITING_TID_TAIL); 2114 if (waiting_t == waiting_h) { 2115 ahd_outw(ahd, WAITING_TID_TAIL, scbid); 2116 next = SCB_LIST_NULL; 2117 } else { 2118 ahd_set_scbptr(ahd, waiting_h); 2119 next = ahd_inw_scbram(ahd, SCB_NEXT2); 2120 } 2121 ahd_set_scbptr(ahd, scbid); 2122 ahd_outw(ahd, SCB_NEXT2, next); 2123 } 2124 ahd_set_scbptr(ahd, saved_scbptr); 2125 if (scb->crc_retry_count < AHD_MAX_LQ_CRC_ERRORS) { 2126 if (SCB_IS_SILENT(scb) == FALSE) { 2127 ahd_print_path(ahd, scb); 2128 printf("Probable outgoing LQ CRC error. " 2129 "Retrying command\n"); 2130 AHD_CORRECTABLE_ERROR(ahd); 2131 } 2132 scb->crc_retry_count++; 2133 } else { 2134 aic_set_transaction_status(scb, CAM_UNCOR_PARITY); 2135 aic_freeze_scb(scb); 2136 ahd_freeze_devq(ahd, scb); 2137 } 2138 /* Return unpausing the sequencer. */ 2139 return (0); 2140 } else if ((ahd_inb(ahd, PERRDIAG) & PARITYERR) != 0) { 2141 /* 2142 * Ignore what are really parity errors that 2143 * occur on the last REQ of a free running 2144 * clock prior to going busfree. Some drives 2145 * do not properly active negate just before 2146 * going busfree resulting in a parity glitch. 2147 */ 2148 ahd_outb(ahd, CLRSINT1, CLRSCSIPERR|CLRBUSFREE); 2149#ifdef AHD_DEBUG 2150 if ((ahd_debug & AHD_SHOW_MASKED_ERRORS) != 0) 2151 printf("%s: Parity on last REQ detected " 2152 "during busfree phase.\n", 2153 ahd_name(ahd)); 2154#endif 2155 /* Return unpausing the sequencer. */ 2156 return (0); 2157 } 2158 if (ahd->src_mode != AHD_MODE_SCSI) { 2159 u_int scbid; 2160 struct scb *scb; 2161 2162 scbid = ahd_get_scbptr(ahd); 2163 scb = ahd_lookup_scb(ahd, scbid); 2164 ahd_print_path(ahd, scb); 2165 printf("Unexpected PKT busfree condition\n"); 2166 AHD_UNCORRECTABLE_ERROR(ahd); 2167 ahd_dump_card_state(ahd); 2168 ahd_abort_scbs(ahd, SCB_GET_TARGET(ahd, scb), 'A', 2169 SCB_GET_LUN(scb), SCB_GET_TAG(scb), 2170 ROLE_INITIATOR, CAM_UNEXP_BUSFREE); 2171 2172 /* Return restarting the sequencer. */ 2173 return (1); 2174 } 2175 printf("%s: Unexpected PKT busfree condition\n", ahd_name(ahd)); 2176 AHD_UNCORRECTABLE_ERROR(ahd); 2177 ahd_dump_card_state(ahd); 2178 /* Restart the sequencer. */ 2179 return (1); 2180} 2181 2182/* 2183 * Non-packetized unexpected or expected busfree. 2184 */ 2185static int 2186ahd_handle_nonpkt_busfree(struct ahd_softc *ahd) 2187{ 2188 struct ahd_devinfo devinfo; 2189 struct scb *scb; 2190 u_int lastphase; 2191 u_int saved_scsiid; 2192 u_int saved_lun; 2193 u_int target; 2194 u_int initiator_role_id; 2195 u_int scbid; 2196 u_int ppr_busfree; 2197 int printerror; 2198 2199 /* 2200 * Look at what phase we were last in. If its message out, 2201 * chances are pretty good that the busfree was in response 2202 * to one of our abort requests. 2203 */ 2204 lastphase = ahd_inb(ahd, LASTPHASE); 2205 saved_scsiid = ahd_inb(ahd, SAVED_SCSIID); 2206 saved_lun = ahd_inb(ahd, SAVED_LUN); 2207 target = SCSIID_TARGET(ahd, saved_scsiid); 2208 initiator_role_id = SCSIID_OUR_ID(saved_scsiid); 2209 ahd_compile_devinfo(&devinfo, initiator_role_id, 2210 target, saved_lun, 'A', ROLE_INITIATOR); 2211 printerror = 1; 2212 2213 scbid = ahd_get_scbptr(ahd); 2214 scb = ahd_lookup_scb(ahd, scbid); 2215 if (scb != NULL 2216 && (ahd_inb(ahd, SEQ_FLAGS) & NOT_IDENTIFIED) != 0) 2217 scb = NULL; 2218 2219 ppr_busfree = (ahd->msg_flags & MSG_FLAG_EXPECT_PPR_BUSFREE) != 0; 2220 if (lastphase == P_MESGOUT) { 2221 u_int tag; 2222 2223 tag = SCB_LIST_NULL; 2224 if (ahd_sent_msg(ahd, AHDMSG_1B, MSG_ABORT_TAG, TRUE) 2225 || ahd_sent_msg(ahd, AHDMSG_1B, MSG_ABORT, TRUE)) { 2226 int found; 2227 int sent_msg; 2228 2229 if (scb == NULL) { 2230 ahd_print_devinfo(ahd, &devinfo); 2231 printf("Abort for unidentified " 2232 "connection completed.\n"); 2233 /* restart the sequencer. */ 2234 return (1); 2235 } 2236 sent_msg = ahd->msgout_buf[ahd->msgout_index - 1]; 2237 ahd_print_path(ahd, scb); 2238 printf("SCB %d - Abort%s Completed.\n", 2239 SCB_GET_TAG(scb), 2240 sent_msg == MSG_ABORT_TAG ? "" : " Tag"); 2241 2242 if (sent_msg == MSG_ABORT_TAG) 2243 tag = SCB_GET_TAG(scb); 2244 2245 if ((scb->flags & SCB_CMDPHASE_ABORT) != 0) { 2246 /* 2247 * This abort is in response to an 2248 * unexpected switch to command phase 2249 * for a packetized connection. Since 2250 * the identify message was never sent, 2251 * "saved lun" is 0. We really want to 2252 * abort only the SCB that encountered 2253 * this error, which could have a different 2254 * lun. The SCB will be retried so the OS 2255 * will see the UA after renegotiating to 2256 * packetized. 2257 */ 2258 tag = SCB_GET_TAG(scb); 2259 saved_lun = scb->hscb->lun; 2260 } 2261 found = ahd_abort_scbs(ahd, target, 'A', saved_lun, 2262 tag, ROLE_INITIATOR, 2263 CAM_REQ_ABORTED); 2264 printf("found == 0x%x\n", found); 2265 printerror = 0; 2266 } else if (ahd_sent_msg(ahd, AHDMSG_1B, 2267 MSG_BUS_DEV_RESET, TRUE)) { 2268#ifdef __FreeBSD__ 2269 /* 2270 * Don't mark the user's request for this BDR 2271 * as completing with CAM_BDR_SENT. CAM3 2272 * specifies CAM_REQ_CMP. 2273 */ 2274 if (scb != NULL 2275 && scb->io_ctx->ccb_h.func_code== XPT_RESET_DEV 2276 && ahd_match_scb(ahd, scb, target, 'A', 2277 CAM_LUN_WILDCARD, SCB_LIST_NULL, 2278 ROLE_INITIATOR)) 2279 aic_set_transaction_status(scb, CAM_REQ_CMP); 2280#endif 2281 ahd_handle_devreset(ahd, &devinfo, CAM_LUN_WILDCARD, 2282 CAM_BDR_SENT, "Bus Device Reset", 2283 /*verbose_level*/0); 2284 printerror = 0; 2285 } else if (ahd_sent_msg(ahd, AHDMSG_EXT, MSG_EXT_PPR, FALSE) 2286 && ppr_busfree == 0) { 2287 struct ahd_initiator_tinfo *tinfo; 2288 struct ahd_tmode_tstate *tstate; 2289 2290 /* 2291 * PPR Rejected. 2292 * 2293 * If the previous negotiation was packetized, 2294 * this could be because the device has been 2295 * reset without our knowledge. Force our 2296 * current negotiation to async and retry the 2297 * negotiation. Otherwise retry the command 2298 * with non-ppr negotiation. 2299 */ 2300#ifdef AHD_DEBUG 2301 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0) 2302 printf("PPR negotiation rejected busfree.\n"); 2303#endif 2304 tinfo = ahd_fetch_transinfo(ahd, devinfo.channel, 2305 devinfo.our_scsiid, 2306 devinfo.target, &tstate); 2307 if ((tinfo->curr.ppr_options & MSG_EXT_PPR_IU_REQ)!=0) { 2308 ahd_set_width(ahd, &devinfo, 2309 MSG_EXT_WDTR_BUS_8_BIT, 2310 AHD_TRANS_CUR, 2311 /*paused*/TRUE); 2312 ahd_set_syncrate(ahd, &devinfo, 2313 /*period*/0, /*offset*/0, 2314 /*ppr_options*/0, 2315 AHD_TRANS_CUR, 2316 /*paused*/TRUE); 2317 /* 2318 * The expect PPR busfree handler below 2319 * will effect the retry and necessary 2320 * abort. 2321 */ 2322 } else { 2323 tinfo->curr.transport_version = 2; 2324 tinfo->goal.transport_version = 2; 2325 tinfo->goal.ppr_options = 0; 2326 /* 2327 * Remove any SCBs in the waiting for selection 2328 * queue that may also be for this target so 2329 * that command ordering is preserved. 2330 */ 2331 ahd_freeze_devq(ahd, scb); 2332 ahd_qinfifo_requeue_tail(ahd, scb); 2333 printerror = 0; 2334 } 2335 } else if (ahd_sent_msg(ahd, AHDMSG_EXT, MSG_EXT_WDTR, FALSE) 2336 && ppr_busfree == 0) { 2337 /* 2338 * Negotiation Rejected. Go-narrow and 2339 * retry command. 2340 */ 2341#ifdef AHD_DEBUG 2342 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0) 2343 printf("WDTR negotiation rejected busfree.\n"); 2344#endif 2345 ahd_set_width(ahd, &devinfo, 2346 MSG_EXT_WDTR_BUS_8_BIT, 2347 AHD_TRANS_CUR|AHD_TRANS_GOAL, 2348 /*paused*/TRUE); 2349 /* 2350 * Remove any SCBs in the waiting for selection 2351 * queue that may also be for this target so that 2352 * command ordering is preserved. 2353 */ 2354 ahd_freeze_devq(ahd, scb); 2355 ahd_qinfifo_requeue_tail(ahd, scb); 2356 printerror = 0; 2357 } else if (ahd_sent_msg(ahd, AHDMSG_EXT, MSG_EXT_SDTR, FALSE) 2358 && ppr_busfree == 0) { 2359 /* 2360 * Negotiation Rejected. Go-async and 2361 * retry command. 2362 */ 2363#ifdef AHD_DEBUG 2364 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0) 2365 printf("SDTR negotiation rejected busfree.\n"); 2366#endif 2367 ahd_set_syncrate(ahd, &devinfo, 2368 /*period*/0, /*offset*/0, 2369 /*ppr_options*/0, 2370 AHD_TRANS_CUR|AHD_TRANS_GOAL, 2371 /*paused*/TRUE); 2372 /* 2373 * Remove any SCBs in the waiting for selection 2374 * queue that may also be for this target so that 2375 * command ordering is preserved. 2376 */ 2377 ahd_freeze_devq(ahd, scb); 2378 ahd_qinfifo_requeue_tail(ahd, scb); 2379 printerror = 0; 2380 } else if ((ahd->msg_flags & MSG_FLAG_EXPECT_IDE_BUSFREE) != 0 2381 && ahd_sent_msg(ahd, AHDMSG_1B, 2382 MSG_INITIATOR_DET_ERR, TRUE)) { 2383 2384#ifdef AHD_DEBUG 2385 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0) 2386 printf("Expected IDE Busfree\n"); 2387#endif 2388 printerror = 0; 2389 } else if ((ahd->msg_flags & MSG_FLAG_EXPECT_QASREJ_BUSFREE) 2390 && ahd_sent_msg(ahd, AHDMSG_1B, 2391 MSG_MESSAGE_REJECT, TRUE)) { 2392 2393#ifdef AHD_DEBUG 2394 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0) 2395 printf("Expected QAS Reject Busfree\n"); 2396#endif 2397 printerror = 0; 2398 } 2399 } 2400 2401 /* 2402 * The busfree required flag is honored at the end of 2403 * the message phases. We check it last in case we 2404 * had to send some other message that caused a busfree. 2405 */ 2406 if (printerror != 0 2407 && (lastphase == P_MESGIN || lastphase == P_MESGOUT) 2408 && ((ahd->msg_flags & MSG_FLAG_EXPECT_PPR_BUSFREE) != 0)) { 2409 2410 ahd_freeze_devq(ahd, scb); 2411 aic_set_transaction_status(scb, CAM_REQUEUE_REQ); 2412 aic_freeze_scb(scb); 2413 if ((ahd->msg_flags & MSG_FLAG_IU_REQ_CHANGED) != 0) { 2414 ahd_abort_scbs(ahd, SCB_GET_TARGET(ahd, scb), 2415 SCB_GET_CHANNEL(ahd, scb), 2416 SCB_GET_LUN(scb), SCB_LIST_NULL, 2417 ROLE_INITIATOR, CAM_REQ_ABORTED); 2418 } else { 2419#ifdef AHD_DEBUG 2420 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0) 2421 printf("PPR Negotiation Busfree.\n"); 2422#endif 2423 ahd_done(ahd, scb); 2424 } 2425 printerror = 0; 2426 } 2427 if (printerror != 0) { 2428 int aborted; 2429 2430 aborted = 0; 2431 if (scb != NULL) { 2432 u_int tag; 2433 2434 if ((scb->hscb->control & TAG_ENB) != 0) 2435 tag = SCB_GET_TAG(scb); 2436 else 2437 tag = SCB_LIST_NULL; 2438 ahd_print_path(ahd, scb); 2439 aborted = ahd_abort_scbs(ahd, target, 'A', 2440 SCB_GET_LUN(scb), tag, 2441 ROLE_INITIATOR, 2442 CAM_UNEXP_BUSFREE); 2443 } else { 2444 /* 2445 * We had not fully identified this connection, 2446 * so we cannot abort anything. 2447 */ 2448 printf("%s: ", ahd_name(ahd)); 2449 } 2450 printf("Unexpected busfree %s, %d SCBs aborted, " 2451 "PRGMCNT == 0x%x\n", 2452 ahd_lookup_phase_entry(lastphase)->phasemsg, 2453 aborted, 2454 ahd_inw(ahd, PRGMCNT)); 2455 AHD_UNCORRECTABLE_ERROR(ahd); 2456 ahd_dump_card_state(ahd); 2457 if (lastphase != P_BUSFREE) 2458 ahd_force_renegotiation(ahd, &devinfo); 2459 } 2460 /* Always restart the sequencer. */ 2461 return (1); 2462} 2463 2464static void 2465ahd_handle_proto_violation(struct ahd_softc *ahd) 2466{ 2467 struct ahd_devinfo devinfo; 2468 struct scb *scb; 2469 u_int scbid; 2470 u_int seq_flags; 2471 u_int curphase; 2472 u_int lastphase; 2473 int found; 2474 2475 ahd_fetch_devinfo(ahd, &devinfo); 2476 scbid = ahd_get_scbptr(ahd); 2477 scb = ahd_lookup_scb(ahd, scbid); 2478 seq_flags = ahd_inb(ahd, SEQ_FLAGS); 2479 curphase = ahd_inb(ahd, SCSISIGI) & PHASE_MASK; 2480 lastphase = ahd_inb(ahd, LASTPHASE); 2481 if ((seq_flags & NOT_IDENTIFIED) != 0) { 2482 2483 /* 2484 * The reconnecting target either did not send an 2485 * identify message, or did, but we didn't find an SCB 2486 * to match. 2487 */ 2488 ahd_print_devinfo(ahd, &devinfo); 2489 printf("Target did not send an IDENTIFY message. " 2490 "LASTPHASE = 0x%x.\n", lastphase); 2491 AHD_UNCORRECTABLE_ERROR(ahd); 2492 scb = NULL; 2493 } else if (scb == NULL) { 2494 /* 2495 * We don't seem to have an SCB active for this 2496 * transaction. Print an error and reset the bus. 2497 */ 2498 ahd_print_devinfo(ahd, &devinfo); 2499 printf("No SCB found during protocol violation\n"); 2500 AHD_UNCORRECTABLE_ERROR(ahd); 2501 goto proto_violation_reset; 2502 } else { 2503 aic_set_transaction_status(scb, CAM_SEQUENCE_FAIL); 2504 if ((seq_flags & NO_CDB_SENT) != 0) { 2505 ahd_print_path(ahd, scb); 2506 printf("No or incomplete CDB sent to device.\n"); 2507 AHD_UNCORRECTABLE_ERROR(ahd); 2508 } else if ((ahd_inb_scbram(ahd, SCB_CONTROL) 2509 & STATUS_RCVD) == 0) { 2510 /* 2511 * The target never bothered to provide status to 2512 * us prior to completing the command. Since we don't 2513 * know the disposition of this command, we must attempt 2514 * to abort it. Assert ATN and prepare to send an abort 2515 * message. 2516 */ 2517 ahd_print_path(ahd, scb); 2518 printf("Completed command without status.\n"); 2519 } else { 2520 ahd_print_path(ahd, scb); 2521 printf("Unknown protocol violation.\n"); 2522 AHD_UNCORRECTABLE_ERROR(ahd); 2523 ahd_dump_card_state(ahd); 2524 } 2525 } 2526 if ((lastphase & ~P_DATAIN_DT) == 0 2527 || lastphase == P_COMMAND) { 2528proto_violation_reset: 2529 /* 2530 * Target either went directly to data 2531 * phase or didn't respond to our ATN. 2532 * The only safe thing to do is to blow 2533 * it away with a bus reset. 2534 */ 2535 found = ahd_reset_channel(ahd, 'A', TRUE); 2536 printf("%s: Issued Channel %c Bus Reset. " 2537 "%d SCBs aborted\n", ahd_name(ahd), 'A', found); 2538 AHD_UNCORRECTABLE_ERROR(ahd); 2539 } else { 2540 /* 2541 * Leave the selection hardware off in case 2542 * this abort attempt will affect yet to 2543 * be sent commands. 2544 */ 2545 ahd_outb(ahd, SCSISEQ0, 2546 ahd_inb(ahd, SCSISEQ0) & ~ENSELO); 2547 ahd_assert_atn(ahd); 2548 ahd_outb(ahd, MSG_OUT, HOST_MSG); 2549 if (scb == NULL) { 2550 ahd_print_devinfo(ahd, &devinfo); 2551 ahd->msgout_buf[0] = MSG_ABORT_TASK; 2552 ahd->msgout_len = 1; 2553 ahd->msgout_index = 0; 2554 ahd->msg_type = MSG_TYPE_INITIATOR_MSGOUT; 2555 } else { 2556 ahd_print_path(ahd, scb); 2557 scb->flags |= SCB_ABORT; 2558 } 2559 printf("Protocol violation %s. Attempting to abort.\n", 2560 ahd_lookup_phase_entry(curphase)->phasemsg); 2561 AHD_UNCORRECTABLE_ERROR(ahd); 2562 } 2563} 2564 2565/* 2566 * Force renegotiation to occur the next time we initiate 2567 * a command to the current device. 2568 */ 2569static void 2570ahd_force_renegotiation(struct ahd_softc *ahd, struct ahd_devinfo *devinfo) 2571{ 2572 struct ahd_initiator_tinfo *targ_info; 2573 struct ahd_tmode_tstate *tstate; 2574 2575#ifdef AHD_DEBUG 2576 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0) { 2577 ahd_print_devinfo(ahd, devinfo); 2578 printf("Forcing renegotiation\n"); 2579 } 2580#endif 2581 targ_info = ahd_fetch_transinfo(ahd, 2582 devinfo->channel, 2583 devinfo->our_scsiid, 2584 devinfo->target, 2585 &tstate); 2586 ahd_update_neg_request(ahd, devinfo, tstate, 2587 targ_info, AHD_NEG_IF_NON_ASYNC); 2588} 2589 2590#define AHD_MAX_STEPS 2000 2591void 2592ahd_clear_critical_section(struct ahd_softc *ahd) 2593{ 2594 ahd_mode_state saved_modes; 2595 int stepping; 2596 int steps; 2597 int first_instr; 2598 u_int simode0; 2599 u_int simode1; 2600 u_int simode3; 2601 u_int lqimode0; 2602 u_int lqimode1; 2603 u_int lqomode0; 2604 u_int lqomode1; 2605 2606 if (ahd->num_critical_sections == 0) 2607 return; 2608 2609 stepping = FALSE; 2610 steps = 0; 2611 first_instr = 0; 2612 simode0 = 0; 2613 simode1 = 0; 2614 simode3 = 0; 2615 lqimode0 = 0; 2616 lqimode1 = 0; 2617 lqomode0 = 0; 2618 lqomode1 = 0; 2619 saved_modes = ahd_save_modes(ahd); 2620 for (;;) { 2621 struct cs *cs; 2622 u_int seqaddr; 2623 u_int i; 2624 2625 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 2626 seqaddr = ahd_inw(ahd, CURADDR); 2627 2628 cs = ahd->critical_sections; 2629 for (i = 0; i < ahd->num_critical_sections; i++, cs++) { 2630 2631 if (cs->begin < seqaddr && cs->end >= seqaddr) 2632 break; 2633 } 2634 2635 if (i == ahd->num_critical_sections) 2636 break; 2637 2638 if (steps > AHD_MAX_STEPS) { 2639 printf("%s: Infinite loop in critical section\n" 2640 "%s: First Instruction 0x%x now 0x%x\n", 2641 ahd_name(ahd), ahd_name(ahd), first_instr, 2642 seqaddr); 2643 AHD_FATAL_ERROR(ahd); 2644 ahd_dump_card_state(ahd); 2645 panic("critical section loop"); 2646 } 2647 2648 steps++; 2649#ifdef AHD_DEBUG 2650 if ((ahd_debug & AHD_SHOW_MISC) != 0) 2651 printf("%s: Single stepping at 0x%x\n", ahd_name(ahd), 2652 seqaddr); 2653#endif 2654 if (stepping == FALSE) { 2655 2656 first_instr = seqaddr; 2657 ahd_set_modes(ahd, AHD_MODE_CFG, AHD_MODE_CFG); 2658 simode0 = ahd_inb(ahd, SIMODE0); 2659 simode3 = ahd_inb(ahd, SIMODE3); 2660 lqimode0 = ahd_inb(ahd, LQIMODE0); 2661 lqimode1 = ahd_inb(ahd, LQIMODE1); 2662 lqomode0 = ahd_inb(ahd, LQOMODE0); 2663 lqomode1 = ahd_inb(ahd, LQOMODE1); 2664 ahd_outb(ahd, SIMODE0, 0); 2665 ahd_outb(ahd, SIMODE3, 0); 2666 ahd_outb(ahd, LQIMODE0, 0); 2667 ahd_outb(ahd, LQIMODE1, 0); 2668 ahd_outb(ahd, LQOMODE0, 0); 2669 ahd_outb(ahd, LQOMODE1, 0); 2670 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 2671 simode1 = ahd_inb(ahd, SIMODE1); 2672 /* 2673 * We don't clear ENBUSFREE. Unfortunately 2674 * we cannot re-enable busfree detection within 2675 * the current connection, so we must leave it 2676 * on while single stepping. 2677 */ 2678 ahd_outb(ahd, SIMODE1, simode1 & ENBUSFREE); 2679 ahd_outb(ahd, SEQCTL0, ahd_inb(ahd, SEQCTL0) | STEP); 2680 stepping = TRUE; 2681 } 2682 ahd_outb(ahd, CLRSINT1, CLRBUSFREE); 2683 ahd_outb(ahd, CLRINT, CLRSCSIINT); 2684 ahd_set_modes(ahd, ahd->saved_src_mode, ahd->saved_dst_mode); 2685 ahd_outb(ahd, HCNTRL, ahd->unpause); 2686 while (!ahd_is_paused(ahd)) 2687 aic_delay(200); 2688 ahd_update_modes(ahd); 2689 } 2690 if (stepping) { 2691 ahd_set_modes(ahd, AHD_MODE_CFG, AHD_MODE_CFG); 2692 ahd_outb(ahd, SIMODE0, simode0); 2693 ahd_outb(ahd, SIMODE3, simode3); 2694 ahd_outb(ahd, LQIMODE0, lqimode0); 2695 ahd_outb(ahd, LQIMODE1, lqimode1); 2696 ahd_outb(ahd, LQOMODE0, lqomode0); 2697 ahd_outb(ahd, LQOMODE1, lqomode1); 2698 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 2699 ahd_outb(ahd, SEQCTL0, ahd_inb(ahd, SEQCTL0) & ~STEP); 2700 ahd_outb(ahd, SIMODE1, simode1); 2701 /* 2702 * SCSIINT seems to glitch occassionally when 2703 * the interrupt masks are restored. Clear SCSIINT 2704 * one more time so that only persistent errors 2705 * are seen as a real interrupt. 2706 */ 2707 ahd_outb(ahd, CLRINT, CLRSCSIINT); 2708 } 2709 ahd_restore_modes(ahd, saved_modes); 2710} 2711 2712/* 2713 * Clear any pending interrupt status. 2714 */ 2715void 2716ahd_clear_intstat(struct ahd_softc *ahd) 2717{ 2718 AHD_ASSERT_MODES(ahd, ~(AHD_MODE_UNKNOWN_MSK|AHD_MODE_CFG_MSK), 2719 ~(AHD_MODE_UNKNOWN_MSK|AHD_MODE_CFG_MSK)); 2720 /* Clear any interrupt conditions this may have caused */ 2721 ahd_outb(ahd, CLRLQIINT0, CLRLQIATNQAS|CLRLQICRCT1|CLRLQICRCT2 2722 |CLRLQIBADLQT|CLRLQIATNLQ|CLRLQIATNCMD); 2723 ahd_outb(ahd, CLRLQIINT1, CLRLQIPHASE_LQ|CLRLQIPHASE_NLQ|CLRLIQABORT 2724 |CLRLQICRCI_LQ|CLRLQICRCI_NLQ|CLRLQIBADLQI 2725 |CLRLQIOVERI_LQ|CLRLQIOVERI_NLQ|CLRNONPACKREQ); 2726 ahd_outb(ahd, CLRLQOINT0, CLRLQOTARGSCBPERR|CLRLQOSTOPT2|CLRLQOATNLQ 2727 |CLRLQOATNPKT|CLRLQOTCRC); 2728 ahd_outb(ahd, CLRLQOINT1, CLRLQOINITSCBPERR|CLRLQOSTOPI2|CLRLQOBADQAS 2729 |CLRLQOBUSFREE|CLRLQOPHACHGINPKT); 2730 if ((ahd->bugs & AHD_CLRLQO_AUTOCLR_BUG) != 0) { 2731 ahd_outb(ahd, CLRLQOINT0, 0); 2732 ahd_outb(ahd, CLRLQOINT1, 0); 2733 } 2734 ahd_outb(ahd, CLRSINT3, CLRNTRAMPERR|CLROSRAMPERR); 2735 ahd_outb(ahd, CLRSINT1, CLRSELTIMEO|CLRATNO|CLRSCSIRSTI 2736 |CLRBUSFREE|CLRSCSIPERR|CLRREQINIT); 2737 ahd_outb(ahd, CLRSINT0, CLRSELDO|CLRSELDI|CLRSELINGO 2738 |CLRIOERR|CLROVERRUN); 2739 ahd_outb(ahd, CLRINT, CLRSCSIINT); 2740} 2741 2742/**************************** Debugging Routines ******************************/ 2743#ifdef AHD_DEBUG 2744uint32_t ahd_debug = AHD_DEBUG_OPTS; 2745#endif 2746void 2747ahd_print_scb(struct scb *scb) 2748{ 2749 struct hardware_scb *hscb; 2750 int i; 2751 2752 hscb = scb->hscb; 2753 printf("scb:%p control:0x%x scsiid:0x%x lun:%d cdb_len:%d\n", 2754 (void *)scb, 2755 hscb->control, 2756 hscb->scsiid, 2757 hscb->lun, 2758 hscb->cdb_len); 2759 printf("Shared Data: "); 2760 for (i = 0; i < sizeof(hscb->shared_data.idata.cdb); i++) 2761 printf("%#02x", hscb->shared_data.idata.cdb[i]); 2762 printf(" dataptr:%#x%x datacnt:%#x sgptr:%#x tag:%#x\n", 2763 (uint32_t)((aic_le64toh(hscb->dataptr) >> 32) & 0xFFFFFFFF), 2764 (uint32_t)(aic_le64toh(hscb->dataptr) & 0xFFFFFFFF), 2765 aic_le32toh(hscb->datacnt), 2766 aic_le32toh(hscb->sgptr), 2767 SCB_GET_TAG(scb)); 2768 ahd_dump_sglist(scb); 2769} 2770 2771void 2772ahd_dump_sglist(struct scb *scb) 2773{ 2774 int i; 2775 2776 if (scb->sg_count > 0) { 2777 if ((scb->ahd_softc->flags & AHD_64BIT_ADDRESSING) != 0) { 2778 struct ahd_dma64_seg *sg_list; 2779 2780 sg_list = (struct ahd_dma64_seg*)scb->sg_list; 2781 for (i = 0; i < scb->sg_count; i++) { 2782 uint64_t addr; 2783 uint32_t len; 2784 2785 addr = aic_le64toh(sg_list[i].addr); 2786 len = aic_le32toh(sg_list[i].len); 2787 printf("sg[%d] - Addr 0x%x%x : Length %d%s\n", 2788 i, 2789 (uint32_t)((addr >> 32) & 0xFFFFFFFF), 2790 (uint32_t)(addr & 0xFFFFFFFF), 2791 sg_list[i].len & AHD_SG_LEN_MASK, 2792 (sg_list[i].len & AHD_DMA_LAST_SEG) 2793 ? " Last" : ""); 2794 } 2795 } else { 2796 struct ahd_dma_seg *sg_list; 2797 2798 sg_list = (struct ahd_dma_seg*)scb->sg_list; 2799 for (i = 0; i < scb->sg_count; i++) { 2800 uint32_t len; 2801 2802 len = aic_le32toh(sg_list[i].len); 2803 printf("sg[%d] - Addr 0x%x%x : Length %d%s\n", 2804 i, 2805 (len & AHD_SG_HIGH_ADDR_MASK) >> 24, 2806 aic_le32toh(sg_list[i].addr), 2807 len & AHD_SG_LEN_MASK, 2808 len & AHD_DMA_LAST_SEG ? " Last" : ""); 2809 } 2810 } 2811 } 2812} 2813 2814/************************* Transfer Negotiation *******************************/ 2815/* 2816 * Allocate per target mode instance (ID we respond to as a target) 2817 * transfer negotiation data structures. 2818 */ 2819static struct ahd_tmode_tstate * 2820ahd_alloc_tstate(struct ahd_softc *ahd, u_int scsi_id, char channel) 2821{ 2822 struct ahd_tmode_tstate *master_tstate; 2823 struct ahd_tmode_tstate *tstate; 2824 int i; 2825 2826 master_tstate = ahd->enabled_targets[ahd->our_id]; 2827 if (ahd->enabled_targets[scsi_id] != NULL 2828 && ahd->enabled_targets[scsi_id] != master_tstate) 2829 panic("%s: ahd_alloc_tstate - Target already allocated", 2830 ahd_name(ahd)); 2831 tstate = malloc(sizeof(*tstate), M_DEVBUF, M_NOWAIT); 2832 if (tstate == NULL) 2833 return (NULL); 2834 2835 /* 2836 * If we have allocated a master tstate, copy user settings from 2837 * the master tstate (taken from SRAM or the EEPROM) for this 2838 * channel, but reset our current and goal settings to async/narrow 2839 * until an initiator talks to us. 2840 */ 2841 if (master_tstate != NULL) { 2842 memcpy(tstate, master_tstate, sizeof(*tstate)); 2843 memset(tstate->enabled_luns, 0, sizeof(tstate->enabled_luns)); 2844 for (i = 0; i < 16; i++) { 2845 memset(&tstate->transinfo[i].curr, 0, 2846 sizeof(tstate->transinfo[i].curr)); 2847 memset(&tstate->transinfo[i].goal, 0, 2848 sizeof(tstate->transinfo[i].goal)); 2849 } 2850 } else 2851 memset(tstate, 0, sizeof(*tstate)); 2852 ahd->enabled_targets[scsi_id] = tstate; 2853 return (tstate); 2854} 2855 2856#ifdef AHD_TARGET_MODE 2857/* 2858 * Free per target mode instance (ID we respond to as a target) 2859 * transfer negotiation data structures. 2860 */ 2861static void 2862ahd_free_tstate(struct ahd_softc *ahd, u_int scsi_id, char channel, int force) 2863{ 2864 struct ahd_tmode_tstate *tstate; 2865 2866 /* 2867 * Don't clean up our "master" tstate. 2868 * It has our default user settings. 2869 */ 2870 if (scsi_id == ahd->our_id 2871 && force == FALSE) 2872 return; 2873 2874 tstate = ahd->enabled_targets[scsi_id]; 2875 if (tstate != NULL) 2876 free(tstate, M_DEVBUF); 2877 ahd->enabled_targets[scsi_id] = NULL; 2878} 2879#endif 2880 2881/* 2882 * Called when we have an active connection to a target on the bus, 2883 * this function finds the nearest period to the input period limited 2884 * by the capabilities of the bus connectivity of and sync settings for 2885 * the target. 2886 */ 2887void 2888ahd_devlimited_syncrate(struct ahd_softc *ahd, 2889 struct ahd_initiator_tinfo *tinfo, 2890 u_int *period, u_int *ppr_options, role_t role) 2891{ 2892 struct ahd_transinfo *transinfo; 2893 u_int maxsync; 2894 2895 if ((ahd_inb(ahd, SBLKCTL) & ENAB40) != 0 2896 && (ahd_inb(ahd, SSTAT2) & EXP_ACTIVE) == 0) { 2897 maxsync = AHD_SYNCRATE_PACED; 2898 } else { 2899 maxsync = AHD_SYNCRATE_ULTRA; 2900 /* Can't do DT related options on an SE bus */ 2901 *ppr_options &= MSG_EXT_PPR_QAS_REQ; 2902 } 2903 /* 2904 * Never allow a value higher than our current goal 2905 * period otherwise we may allow a target initiated 2906 * negotiation to go above the limit as set by the 2907 * user. In the case of an initiator initiated 2908 * sync negotiation, we limit based on the user 2909 * setting. This allows the system to still accept 2910 * incoming negotiations even if target initiated 2911 * negotiation is not performed. 2912 */ 2913 if (role == ROLE_TARGET) 2914 transinfo = &tinfo->user; 2915 else 2916 transinfo = &tinfo->goal; 2917 *ppr_options &= (transinfo->ppr_options|MSG_EXT_PPR_PCOMP_EN); 2918 if (transinfo->width == MSG_EXT_WDTR_BUS_8_BIT) { 2919 maxsync = MAX(maxsync, AHD_SYNCRATE_ULTRA2); 2920 *ppr_options &= ~MSG_EXT_PPR_DT_REQ; 2921 } 2922 if (transinfo->period == 0) { 2923 *period = 0; 2924 *ppr_options = 0; 2925 } else { 2926 *period = MAX(*period, transinfo->period); 2927 ahd_find_syncrate(ahd, period, ppr_options, maxsync); 2928 } 2929} 2930 2931/* 2932 * Look up the valid period to SCSIRATE conversion in our table. 2933 * Return the period and offset that should be sent to the target 2934 * if this was the beginning of an SDTR. 2935 */ 2936void 2937ahd_find_syncrate(struct ahd_softc *ahd, u_int *period, 2938 u_int *ppr_options, u_int maxsync) 2939{ 2940 if (*period < maxsync) 2941 *period = maxsync; 2942 2943 if ((*ppr_options & MSG_EXT_PPR_DT_REQ) != 0 2944 && *period > AHD_SYNCRATE_MIN_DT) 2945 *ppr_options &= ~MSG_EXT_PPR_DT_REQ; 2946 2947 if (*period > AHD_SYNCRATE_MIN) 2948 *period = 0; 2949 2950 /* Honor PPR option conformance rules. */ 2951 if (*period > AHD_SYNCRATE_PACED) 2952 *ppr_options &= ~MSG_EXT_PPR_RTI; 2953 2954 if ((*ppr_options & MSG_EXT_PPR_IU_REQ) == 0) 2955 *ppr_options &= (MSG_EXT_PPR_DT_REQ|MSG_EXT_PPR_QAS_REQ); 2956 2957 if ((*ppr_options & MSG_EXT_PPR_DT_REQ) == 0) 2958 *ppr_options &= MSG_EXT_PPR_QAS_REQ; 2959 2960 /* Skip all PACED only entries if IU is not available */ 2961 if ((*ppr_options & MSG_EXT_PPR_IU_REQ) == 0 2962 && *period < AHD_SYNCRATE_DT) 2963 *period = AHD_SYNCRATE_DT; 2964 2965 /* Skip all DT only entries if DT is not available */ 2966 if ((*ppr_options & MSG_EXT_PPR_DT_REQ) == 0 2967 && *period < AHD_SYNCRATE_ULTRA2) 2968 *period = AHD_SYNCRATE_ULTRA2; 2969} 2970 2971/* 2972 * Truncate the given synchronous offset to a value the 2973 * current adapter type and syncrate are capable of. 2974 */ 2975void 2976ahd_validate_offset(struct ahd_softc *ahd, 2977 struct ahd_initiator_tinfo *tinfo, 2978 u_int period, u_int *offset, int wide, 2979 role_t role) 2980{ 2981 u_int maxoffset; 2982 2983 /* Limit offset to what we can do */ 2984 if (period == 0) 2985 maxoffset = 0; 2986 else if (period <= AHD_SYNCRATE_PACED) { 2987 if ((ahd->bugs & AHD_PACED_NEGTABLE_BUG) != 0) 2988 maxoffset = MAX_OFFSET_PACED_BUG; 2989 else 2990 maxoffset = MAX_OFFSET_PACED; 2991 } else 2992 maxoffset = MAX_OFFSET_NON_PACED; 2993 *offset = MIN(*offset, maxoffset); 2994 if (tinfo != NULL) { 2995 if (role == ROLE_TARGET) 2996 *offset = MIN(*offset, tinfo->user.offset); 2997 else 2998 *offset = MIN(*offset, tinfo->goal.offset); 2999 } 3000} 3001 3002/* 3003 * Truncate the given transfer width parameter to a value the 3004 * current adapter type is capable of. 3005 */ 3006void 3007ahd_validate_width(struct ahd_softc *ahd, struct ahd_initiator_tinfo *tinfo, 3008 u_int *bus_width, role_t role) 3009{ 3010 switch (*bus_width) { 3011 default: 3012 if (ahd->features & AHD_WIDE) { 3013 /* Respond Wide */ 3014 *bus_width = MSG_EXT_WDTR_BUS_16_BIT; 3015 break; 3016 } 3017 /* FALLTHROUGH */ 3018 case MSG_EXT_WDTR_BUS_8_BIT: 3019 *bus_width = MSG_EXT_WDTR_BUS_8_BIT; 3020 break; 3021 } 3022 if (tinfo != NULL) { 3023 if (role == ROLE_TARGET) 3024 *bus_width = MIN(tinfo->user.width, *bus_width); 3025 else 3026 *bus_width = MIN(tinfo->goal.width, *bus_width); 3027 } 3028} 3029 3030/* 3031 * Update the bitmask of targets for which the controller should 3032 * negotiate with at the next convenient oportunity. This currently 3033 * means the next time we send the initial identify messages for 3034 * a new transaction. 3035 */ 3036int 3037ahd_update_neg_request(struct ahd_softc *ahd, struct ahd_devinfo *devinfo, 3038 struct ahd_tmode_tstate *tstate, 3039 struct ahd_initiator_tinfo *tinfo, ahd_neg_type neg_type) 3040{ 3041 u_int auto_negotiate_orig; 3042 3043 auto_negotiate_orig = tstate->auto_negotiate; 3044 if (neg_type == AHD_NEG_ALWAYS) { 3045 /* 3046 * Force our "current" settings to be 3047 * unknown so that unless a bus reset 3048 * occurs the need to renegotiate is 3049 * recorded persistently. 3050 */ 3051 if ((ahd->features & AHD_WIDE) != 0) 3052 tinfo->curr.width = AHD_WIDTH_UNKNOWN; 3053 tinfo->curr.period = AHD_PERIOD_UNKNOWN; 3054 tinfo->curr.offset = AHD_OFFSET_UNKNOWN; 3055 } 3056 if (tinfo->curr.period != tinfo->goal.period 3057 || tinfo->curr.width != tinfo->goal.width 3058 || tinfo->curr.offset != tinfo->goal.offset 3059 || tinfo->curr.ppr_options != tinfo->goal.ppr_options 3060 || (neg_type == AHD_NEG_IF_NON_ASYNC 3061 && (tinfo->goal.offset != 0 3062 || tinfo->goal.width != MSG_EXT_WDTR_BUS_8_BIT 3063 || tinfo->goal.ppr_options != 0))) 3064 tstate->auto_negotiate |= devinfo->target_mask; 3065 else 3066 tstate->auto_negotiate &= ~devinfo->target_mask; 3067 3068 return (auto_negotiate_orig != tstate->auto_negotiate); 3069} 3070 3071/* 3072 * Update the user/goal/curr tables of synchronous negotiation 3073 * parameters as well as, in the case of a current or active update, 3074 * any data structures on the host controller. In the case of an 3075 * active update, the specified target is currently talking to us on 3076 * the bus, so the transfer parameter update must take effect 3077 * immediately. 3078 */ 3079void 3080ahd_set_syncrate(struct ahd_softc *ahd, struct ahd_devinfo *devinfo, 3081 u_int period, u_int offset, u_int ppr_options, 3082 u_int type, int paused) 3083{ 3084 struct ahd_initiator_tinfo *tinfo; 3085 struct ahd_tmode_tstate *tstate; 3086 u_int old_period; 3087 u_int old_offset; 3088 u_int old_ppr; 3089 int active; 3090 int update_needed; 3091 3092 active = (type & AHD_TRANS_ACTIVE) == AHD_TRANS_ACTIVE; 3093 update_needed = 0; 3094 3095 if (period == 0 || offset == 0) { 3096 period = 0; 3097 offset = 0; 3098 } 3099 3100 tinfo = ahd_fetch_transinfo(ahd, devinfo->channel, devinfo->our_scsiid, 3101 devinfo->target, &tstate); 3102 3103 if ((type & AHD_TRANS_USER) != 0) { 3104 tinfo->user.period = period; 3105 tinfo->user.offset = offset; 3106 tinfo->user.ppr_options = ppr_options; 3107 } 3108 3109 if ((type & AHD_TRANS_GOAL) != 0) { 3110 tinfo->goal.period = period; 3111 tinfo->goal.offset = offset; 3112 tinfo->goal.ppr_options = ppr_options; 3113 } 3114 3115 old_period = tinfo->curr.period; 3116 old_offset = tinfo->curr.offset; 3117 old_ppr = tinfo->curr.ppr_options; 3118 3119 if ((type & AHD_TRANS_CUR) != 0 3120 && (old_period != period 3121 || old_offset != offset 3122 || old_ppr != ppr_options)) { 3123 3124 update_needed++; 3125 3126 tinfo->curr.period = period; 3127 tinfo->curr.offset = offset; 3128 tinfo->curr.ppr_options = ppr_options; 3129 3130 ahd_send_async(ahd, devinfo->channel, devinfo->target, 3131 CAM_LUN_WILDCARD, AC_TRANSFER_NEG, NULL); 3132 if (bootverbose) { 3133 if (offset != 0) { 3134 int options; 3135 3136 printf("%s: target %d synchronous with " 3137 "period = 0x%x, offset = 0x%x", 3138 ahd_name(ahd), devinfo->target, 3139 period, offset); 3140 options = 0; 3141 if ((ppr_options & MSG_EXT_PPR_RD_STRM) != 0) { 3142 printf("(RDSTRM"); 3143 options++; 3144 } 3145 if ((ppr_options & MSG_EXT_PPR_DT_REQ) != 0) { 3146 printf("%s", options ? "|DT" : "(DT"); 3147 options++; 3148 } 3149 if ((ppr_options & MSG_EXT_PPR_IU_REQ) != 0) { 3150 printf("%s", options ? "|IU" : "(IU"); 3151 options++; 3152 } 3153 if ((ppr_options & MSG_EXT_PPR_RTI) != 0) { 3154 printf("%s", options ? "|RTI" : "(RTI"); 3155 options++; 3156 } 3157 if ((ppr_options & MSG_EXT_PPR_QAS_REQ) != 0) { 3158 printf("%s", options ? "|QAS" : "(QAS"); 3159 options++; 3160 } 3161 if (options != 0) 3162 printf(")\n"); 3163 else 3164 printf("\n"); 3165 } else { 3166 printf("%s: target %d using " 3167 "asynchronous transfers%s\n", 3168 ahd_name(ahd), devinfo->target, 3169 (ppr_options & MSG_EXT_PPR_QAS_REQ) != 0 3170 ? "(QAS)" : ""); 3171 } 3172 } 3173 } 3174 /* 3175 * Always refresh the neg-table to handle the case of the 3176 * sequencer setting the ENATNO bit for a MK_MESSAGE request. 3177 * We will always renegotiate in that case if this is a 3178 * packetized request. Also manage the busfree expected flag 3179 * from this common routine so that we catch changes due to 3180 * WDTR or SDTR messages. 3181 */ 3182 if ((type & AHD_TRANS_CUR) != 0) { 3183 if (!paused) 3184 ahd_pause(ahd); 3185 ahd_update_neg_table(ahd, devinfo, &tinfo->curr); 3186 if (!paused) 3187 ahd_unpause(ahd); 3188 if (ahd->msg_type != MSG_TYPE_NONE) { 3189 if ((old_ppr & MSG_EXT_PPR_IU_REQ) 3190 != (ppr_options & MSG_EXT_PPR_IU_REQ)) { 3191#ifdef AHD_DEBUG 3192 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0) { 3193 ahd_print_devinfo(ahd, devinfo); 3194 printf("Expecting IU Change busfree\n"); 3195 } 3196#endif 3197 ahd->msg_flags |= MSG_FLAG_EXPECT_PPR_BUSFREE 3198 | MSG_FLAG_IU_REQ_CHANGED; 3199 } 3200 if ((old_ppr & MSG_EXT_PPR_IU_REQ) != 0) { 3201#ifdef AHD_DEBUG 3202 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0) 3203 printf("PPR with IU_REQ outstanding\n"); 3204#endif 3205 ahd->msg_flags |= MSG_FLAG_EXPECT_PPR_BUSFREE; 3206 } 3207 } 3208 } 3209 3210 update_needed += ahd_update_neg_request(ahd, devinfo, tstate, 3211 tinfo, AHD_NEG_TO_GOAL); 3212 3213 if (update_needed && active) 3214 ahd_update_pending_scbs(ahd); 3215} 3216 3217/* 3218 * Update the user/goal/curr tables of wide negotiation 3219 * parameters as well as, in the case of a current or active update, 3220 * any data structures on the host controller. In the case of an 3221 * active update, the specified target is currently talking to us on 3222 * the bus, so the transfer parameter update must take effect 3223 * immediately. 3224 */ 3225void 3226ahd_set_width(struct ahd_softc *ahd, struct ahd_devinfo *devinfo, 3227 u_int width, u_int type, int paused) 3228{ 3229 struct ahd_initiator_tinfo *tinfo; 3230 struct ahd_tmode_tstate *tstate; 3231 u_int oldwidth; 3232 int active; 3233 int update_needed; 3234 3235 active = (type & AHD_TRANS_ACTIVE) == AHD_TRANS_ACTIVE; 3236 update_needed = 0; 3237 tinfo = ahd_fetch_transinfo(ahd, devinfo->channel, devinfo->our_scsiid, 3238 devinfo->target, &tstate); 3239 3240 if ((type & AHD_TRANS_USER) != 0) 3241 tinfo->user.width = width; 3242 3243 if ((type & AHD_TRANS_GOAL) != 0) 3244 tinfo->goal.width = width; 3245 3246 oldwidth = tinfo->curr.width; 3247 if ((type & AHD_TRANS_CUR) != 0 && oldwidth != width) { 3248 3249 update_needed++; 3250 3251 tinfo->curr.width = width; 3252 ahd_send_async(ahd, devinfo->channel, devinfo->target, 3253 CAM_LUN_WILDCARD, AC_TRANSFER_NEG, NULL); 3254 if (bootverbose) { 3255 printf("%s: target %d using %dbit transfers\n", 3256 ahd_name(ahd), devinfo->target, 3257 8 * (0x01 << width)); 3258 } 3259 } 3260 3261 if ((type & AHD_TRANS_CUR) != 0) { 3262 if (!paused) 3263 ahd_pause(ahd); 3264 ahd_update_neg_table(ahd, devinfo, &tinfo->curr); 3265 if (!paused) 3266 ahd_unpause(ahd); 3267 } 3268 3269 update_needed += ahd_update_neg_request(ahd, devinfo, tstate, 3270 tinfo, AHD_NEG_TO_GOAL); 3271 if (update_needed && active) 3272 ahd_update_pending_scbs(ahd); 3273 3274} 3275 3276/* 3277 * Update the current state of tagged queuing for a given target. 3278 */ 3279void 3280ahd_set_tags(struct ahd_softc *ahd, struct ahd_devinfo *devinfo, 3281 ahd_queue_alg alg) 3282{ 3283 ahd_platform_set_tags(ahd, devinfo, alg); 3284 ahd_send_async(ahd, devinfo->channel, devinfo->target, 3285 devinfo->lun, AC_TRANSFER_NEG, &alg); 3286} 3287 3288static void 3289ahd_update_neg_table(struct ahd_softc *ahd, struct ahd_devinfo *devinfo, 3290 struct ahd_transinfo *tinfo) 3291{ 3292 ahd_mode_state saved_modes; 3293 u_int period; 3294 u_int ppr_opts; 3295 u_int con_opts; 3296 u_int offset; 3297 u_int saved_negoaddr; 3298 uint8_t iocell_opts[sizeof(ahd->iocell_opts)]; 3299 3300 saved_modes = ahd_save_modes(ahd); 3301 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 3302 3303 saved_negoaddr = ahd_inb(ahd, NEGOADDR); 3304 ahd_outb(ahd, NEGOADDR, devinfo->target); 3305 period = tinfo->period; 3306 offset = tinfo->offset; 3307 memcpy(iocell_opts, ahd->iocell_opts, sizeof(ahd->iocell_opts)); 3308 ppr_opts = tinfo->ppr_options & (MSG_EXT_PPR_QAS_REQ|MSG_EXT_PPR_DT_REQ 3309 |MSG_EXT_PPR_IU_REQ|MSG_EXT_PPR_RTI); 3310 con_opts = 0; 3311 if (period == 0) 3312 period = AHD_SYNCRATE_ASYNC; 3313 if (period == AHD_SYNCRATE_160) { 3314 3315 if ((ahd->bugs & AHD_PACED_NEGTABLE_BUG) != 0) { 3316 /* 3317 * When the SPI4 spec was finalized, PACE transfers 3318 * was not made a configurable option in the PPR 3319 * message. Instead it is assumed to be enabled for 3320 * any syncrate faster than 80MHz. Nevertheless, 3321 * Harpoon2A4 allows this to be configurable. 3322 * 3323 * Harpoon2A4 also assumes at most 2 data bytes per 3324 * negotiated REQ/ACK offset. Paced transfers take 3325 * 4, so we must adjust our offset. 3326 */ 3327 ppr_opts |= PPROPT_PACE; 3328 offset *= 2; 3329 3330 /* 3331 * Harpoon2A assumed that there would be a 3332 * fallback rate between 160MHz and 80Mhz, 3333 * so 7 is used as the period factor rather 3334 * than 8 for 160MHz. 3335 */ 3336 period = AHD_SYNCRATE_REVA_160; 3337 } 3338 if ((tinfo->ppr_options & MSG_EXT_PPR_PCOMP_EN) == 0) 3339 iocell_opts[AHD_PRECOMP_SLEW_INDEX] &= 3340 ~AHD_PRECOMP_MASK; 3341 } else { 3342 /* 3343 * Precomp should be disabled for non-paced transfers. 3344 */ 3345 iocell_opts[AHD_PRECOMP_SLEW_INDEX] &= ~AHD_PRECOMP_MASK; 3346 3347 if ((ahd->features & AHD_NEW_IOCELL_OPTS) != 0 3348 && (ppr_opts & MSG_EXT_PPR_DT_REQ) != 0 3349 && (ppr_opts & MSG_EXT_PPR_IU_REQ) == 0) { 3350 /* 3351 * Slow down our CRC interval to be 3352 * compatible with non-packetized 3353 * U160 devices that can't handle a 3354 * CRC at full speed. 3355 */ 3356 con_opts |= ENSLOWCRC; 3357 } 3358 3359 if ((ahd->bugs & AHD_PACED_NEGTABLE_BUG) != 0) { 3360 /* 3361 * On H2A4, revert to a slower slewrate 3362 * on non-paced transfers. 3363 */ 3364 iocell_opts[AHD_PRECOMP_SLEW_INDEX] &= 3365 ~AHD_SLEWRATE_MASK; 3366 } 3367 } 3368 3369 ahd_outb(ahd, ANNEXCOL, AHD_ANNEXCOL_PRECOMP_SLEW); 3370 ahd_outb(ahd, ANNEXDAT, iocell_opts[AHD_PRECOMP_SLEW_INDEX]); 3371 ahd_outb(ahd, ANNEXCOL, AHD_ANNEXCOL_AMPLITUDE); 3372 ahd_outb(ahd, ANNEXDAT, iocell_opts[AHD_AMPLITUDE_INDEX]); 3373 3374 ahd_outb(ahd, NEGPERIOD, period); 3375 ahd_outb(ahd, NEGPPROPTS, ppr_opts); 3376 ahd_outb(ahd, NEGOFFSET, offset); 3377 3378 if (tinfo->width == MSG_EXT_WDTR_BUS_16_BIT) 3379 con_opts |= WIDEXFER; 3380 3381 /* 3382 * During packetized transfers, the target will 3383 * give us the oportunity to send command packets 3384 * without us asserting attention. 3385 */ 3386 if ((tinfo->ppr_options & MSG_EXT_PPR_IU_REQ) == 0) 3387 con_opts |= ENAUTOATNO; 3388 ahd_outb(ahd, NEGCONOPTS, con_opts); 3389 ahd_outb(ahd, NEGOADDR, saved_negoaddr); 3390 ahd_restore_modes(ahd, saved_modes); 3391} 3392 3393/* 3394 * When the transfer settings for a connection change, setup for 3395 * negotiation in pending SCBs to effect the change as quickly as 3396 * possible. We also cancel any negotiations that are scheduled 3397 * for inflight SCBs that have not been started yet. 3398 */ 3399static void 3400ahd_update_pending_scbs(struct ahd_softc *ahd) 3401{ 3402 struct scb *pending_scb; 3403 int pending_scb_count; 3404 int paused; 3405 u_int saved_scbptr; 3406 ahd_mode_state saved_modes; 3407 3408 /* 3409 * Traverse the pending SCB list and ensure that all of the 3410 * SCBs there have the proper settings. We can only safely 3411 * clear the negotiation required flag (setting requires the 3412 * execution queue to be modified) and this is only possible 3413 * if we are not already attempting to select out for this 3414 * SCB. For this reason, all callers only call this routine 3415 * if we are changing the negotiation settings for the currently 3416 * active transaction on the bus. 3417 */ 3418 pending_scb_count = 0; 3419 LIST_FOREACH(pending_scb, &ahd->pending_scbs, pending_links) { 3420 struct ahd_devinfo devinfo; 3421 struct ahd_initiator_tinfo *tinfo; 3422 struct ahd_tmode_tstate *tstate; 3423 3424 ahd_scb_devinfo(ahd, &devinfo, pending_scb); 3425 tinfo = ahd_fetch_transinfo(ahd, devinfo.channel, 3426 devinfo.our_scsiid, 3427 devinfo.target, &tstate); 3428 if ((tstate->auto_negotiate & devinfo.target_mask) == 0 3429 && (pending_scb->flags & SCB_AUTO_NEGOTIATE) != 0) { 3430 pending_scb->flags &= ~SCB_AUTO_NEGOTIATE; 3431 pending_scb->hscb->control &= ~MK_MESSAGE; 3432 } 3433 ahd_sync_scb(ahd, pending_scb, 3434 BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE); 3435 pending_scb_count++; 3436 } 3437 3438 if (pending_scb_count == 0) 3439 return; 3440 3441 if (ahd_is_paused(ahd)) { 3442 paused = 1; 3443 } else { 3444 paused = 0; 3445 ahd_pause(ahd); 3446 } 3447 3448 /* 3449 * Force the sequencer to reinitialize the selection for 3450 * the command at the head of the execution queue if it 3451 * has already been setup. The negotiation changes may 3452 * effect whether we select-out with ATN. It is only 3453 * safe to clear ENSELO when the bus is not free and no 3454 * selection is in progres or completed. 3455 */ 3456 saved_modes = ahd_save_modes(ahd); 3457 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 3458 if ((ahd_inb(ahd, SCSISIGI) & BSYI) != 0 3459 && (ahd_inb(ahd, SSTAT0) & (SELDO|SELINGO)) == 0) 3460 ahd_outb(ahd, SCSISEQ0, ahd_inb(ahd, SCSISEQ0) & ~ENSELO); 3461 saved_scbptr = ahd_get_scbptr(ahd); 3462 /* Ensure that the hscbs down on the card match the new information */ 3463 LIST_FOREACH(pending_scb, &ahd->pending_scbs, pending_links) { 3464 u_int scb_tag; 3465 u_int control; 3466 3467 scb_tag = SCB_GET_TAG(pending_scb); 3468 ahd_set_scbptr(ahd, scb_tag); 3469 control = ahd_inb_scbram(ahd, SCB_CONTROL); 3470 control &= ~MK_MESSAGE; 3471 control |= pending_scb->hscb->control & MK_MESSAGE; 3472 ahd_outb(ahd, SCB_CONTROL, control); 3473 } 3474 ahd_set_scbptr(ahd, saved_scbptr); 3475 ahd_restore_modes(ahd, saved_modes); 3476 3477 if (paused == 0) 3478 ahd_unpause(ahd); 3479} 3480 3481/**************************** Pathing Information *****************************/ 3482static void 3483ahd_fetch_devinfo(struct ahd_softc *ahd, struct ahd_devinfo *devinfo) 3484{ 3485 ahd_mode_state saved_modes; 3486 u_int saved_scsiid; 3487 role_t role; 3488 int our_id; 3489 3490 saved_modes = ahd_save_modes(ahd); 3491 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 3492 3493 if (ahd_inb(ahd, SSTAT0) & TARGET) 3494 role = ROLE_TARGET; 3495 else 3496 role = ROLE_INITIATOR; 3497 3498 if (role == ROLE_TARGET 3499 && (ahd_inb(ahd, SEQ_FLAGS) & CMDPHASE_PENDING) != 0) { 3500 /* We were selected, so pull our id from TARGIDIN */ 3501 our_id = ahd_inb(ahd, TARGIDIN) & OID; 3502 } else if (role == ROLE_TARGET) 3503 our_id = ahd_inb(ahd, TOWNID); 3504 else 3505 our_id = ahd_inb(ahd, IOWNID); 3506 3507 saved_scsiid = ahd_inb(ahd, SAVED_SCSIID); 3508 ahd_compile_devinfo(devinfo, 3509 our_id, 3510 SCSIID_TARGET(ahd, saved_scsiid), 3511 ahd_inb(ahd, SAVED_LUN), 3512 SCSIID_CHANNEL(ahd, saved_scsiid), 3513 role); 3514 ahd_restore_modes(ahd, saved_modes); 3515} 3516 3517void 3518ahd_print_devinfo(struct ahd_softc *ahd, struct ahd_devinfo *devinfo) 3519{ 3520 printf("%s:%c:%d:%d: ", ahd_name(ahd), 'A', 3521 devinfo->target, devinfo->lun); 3522} 3523 3524struct ahd_phase_table_entry* 3525ahd_lookup_phase_entry(int phase) 3526{ 3527 struct ahd_phase_table_entry *entry; 3528 struct ahd_phase_table_entry *last_entry; 3529 3530 /* 3531 * num_phases doesn't include the default entry which 3532 * will be returned if the phase doesn't match. 3533 */ 3534 last_entry = &ahd_phase_table[num_phases]; 3535 for (entry = ahd_phase_table; entry < last_entry; entry++) { 3536 if (phase == entry->phase) 3537 break; 3538 } 3539 return (entry); 3540} 3541 3542void 3543ahd_compile_devinfo(struct ahd_devinfo *devinfo, u_int our_id, u_int target, 3544 u_int lun, char channel, role_t role) 3545{ 3546 devinfo->our_scsiid = our_id; 3547 devinfo->target = target; 3548 devinfo->lun = lun; 3549 devinfo->target_offset = target; 3550 devinfo->channel = channel; 3551 devinfo->role = role; 3552 if (channel == 'B') 3553 devinfo->target_offset += 8; 3554 devinfo->target_mask = (0x01 << devinfo->target_offset); 3555} 3556 3557static void 3558ahd_scb_devinfo(struct ahd_softc *ahd, struct ahd_devinfo *devinfo, 3559 struct scb *scb) 3560{ 3561 role_t role; 3562 int our_id; 3563 3564 our_id = SCSIID_OUR_ID(scb->hscb->scsiid); 3565 role = ROLE_INITIATOR; 3566 if ((scb->hscb->control & TARGET_SCB) != 0) 3567 role = ROLE_TARGET; 3568 ahd_compile_devinfo(devinfo, our_id, SCB_GET_TARGET(ahd, scb), 3569 SCB_GET_LUN(scb), SCB_GET_CHANNEL(ahd, scb), role); 3570} 3571 3572 3573/************************ Message Phase Processing ****************************/ 3574/* 3575 * When an initiator transaction with the MK_MESSAGE flag either reconnects 3576 * or enters the initial message out phase, we are interrupted. Fill our 3577 * outgoing message buffer with the appropriate message and beging handing 3578 * the message phase(s) manually. 3579 */ 3580static void 3581ahd_setup_initiator_msgout(struct ahd_softc *ahd, struct ahd_devinfo *devinfo, 3582 struct scb *scb) 3583{ 3584 /* 3585 * To facilitate adding multiple messages together, 3586 * each routine should increment the index and len 3587 * variables instead of setting them explicitly. 3588 */ 3589 ahd->msgout_index = 0; 3590 ahd->msgout_len = 0; 3591 3592 if (ahd_currently_packetized(ahd)) 3593 ahd->msg_flags |= MSG_FLAG_PACKETIZED; 3594 3595 if (ahd->send_msg_perror 3596 && ahd_inb(ahd, MSG_OUT) == HOST_MSG) { 3597 ahd->msgout_buf[ahd->msgout_index++] = ahd->send_msg_perror; 3598 ahd->msgout_len++; 3599 ahd->msg_type = MSG_TYPE_INITIATOR_MSGOUT; 3600#ifdef AHD_DEBUG 3601 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0) 3602 printf("Setting up for Parity Error delivery\n"); 3603#endif 3604 return; 3605 } else if (scb == NULL) { 3606 printf("%s: WARNING. No pending message for " 3607 "I_T msgin. Issuing NO-OP\n", ahd_name(ahd)); 3608 AHD_CORRECTABLE_ERROR(ahd); 3609 ahd->msgout_buf[ahd->msgout_index++] = MSG_NOOP; 3610 ahd->msgout_len++; 3611 ahd->msg_type = MSG_TYPE_INITIATOR_MSGOUT; 3612 return; 3613 } 3614 3615 if ((scb->flags & SCB_DEVICE_RESET) == 0 3616 && (scb->flags & SCB_PACKETIZED) == 0 3617 && ahd_inb(ahd, MSG_OUT) == MSG_IDENTIFYFLAG) { 3618 u_int identify_msg; 3619 3620 identify_msg = MSG_IDENTIFYFLAG | SCB_GET_LUN(scb); 3621 if ((scb->hscb->control & DISCENB) != 0) 3622 identify_msg |= MSG_IDENTIFY_DISCFLAG; 3623 ahd->msgout_buf[ahd->msgout_index++] = identify_msg; 3624 ahd->msgout_len++; 3625 3626 if ((scb->hscb->control & TAG_ENB) != 0) { 3627 ahd->msgout_buf[ahd->msgout_index++] = 3628 scb->hscb->control & (TAG_ENB|SCB_TAG_TYPE); 3629 ahd->msgout_buf[ahd->msgout_index++] = SCB_GET_TAG(scb); 3630 ahd->msgout_len += 2; 3631 } 3632 } 3633 3634 if (scb->flags & SCB_DEVICE_RESET) { 3635 ahd->msgout_buf[ahd->msgout_index++] = MSG_BUS_DEV_RESET; 3636 ahd->msgout_len++; 3637 ahd_print_path(ahd, scb); 3638 printf("Bus Device Reset Message Sent\n"); 3639 AHD_CORRECTABLE_ERROR(ahd); 3640 /* 3641 * Clear our selection hardware in advance of 3642 * the busfree. We may have an entry in the waiting 3643 * Q for this target, and we don't want to go about 3644 * selecting while we handle the busfree and blow it 3645 * away. 3646 */ 3647 ahd_outb(ahd, SCSISEQ0, 0); 3648 } else if ((scb->flags & SCB_ABORT) != 0) { 3649 3650 if ((scb->hscb->control & TAG_ENB) != 0) { 3651 ahd->msgout_buf[ahd->msgout_index++] = MSG_ABORT_TAG; 3652 } else { 3653 ahd->msgout_buf[ahd->msgout_index++] = MSG_ABORT; 3654 } 3655 ahd->msgout_len++; 3656 ahd_print_path(ahd, scb); 3657 printf("Abort%s Message Sent\n", 3658 (scb->hscb->control & TAG_ENB) != 0 ? " Tag" : ""); 3659 AHD_CORRECTABLE_ERROR(ahd); 3660 /* 3661 * Clear our selection hardware in advance of 3662 * the busfree. We may have an entry in the waiting 3663 * Q for this target, and we don't want to go about 3664 * selecting while we handle the busfree and blow it 3665 * away. 3666 */ 3667 ahd_outb(ahd, SCSISEQ0, 0); 3668 } else if ((scb->flags & (SCB_AUTO_NEGOTIATE|SCB_NEGOTIATE)) != 0) { 3669 ahd_build_transfer_msg(ahd, devinfo); 3670 /* 3671 * Clear our selection hardware in advance of potential 3672 * PPR IU status change busfree. We may have an entry in 3673 * the waiting Q for this target, and we don't want to go 3674 * about selecting while we handle the busfree and blow 3675 * it away. 3676 */ 3677 ahd_outb(ahd, SCSISEQ0, 0); 3678 } else { 3679 printf("ahd_intr: AWAITING_MSG for an SCB that " 3680 "does not have a waiting message\n"); 3681 printf("SCSIID = %x, target_mask = %x\n", scb->hscb->scsiid, 3682 devinfo->target_mask); 3683 AHD_FATAL_ERROR(ahd); 3684 panic("SCB = %d, SCB Control = %x:%x, MSG_OUT = %x " 3685 "SCB flags = %x", SCB_GET_TAG(scb), scb->hscb->control, 3686 ahd_inb_scbram(ahd, SCB_CONTROL), ahd_inb(ahd, MSG_OUT), 3687 scb->flags); 3688 } 3689 3690 /* 3691 * Clear the MK_MESSAGE flag from the SCB so we aren't 3692 * asked to send this message again. 3693 */ 3694 ahd_outb(ahd, SCB_CONTROL, 3695 ahd_inb_scbram(ahd, SCB_CONTROL) & ~MK_MESSAGE); 3696 scb->hscb->control &= ~MK_MESSAGE; 3697 ahd->msgout_index = 0; 3698 ahd->msg_type = MSG_TYPE_INITIATOR_MSGOUT; 3699} 3700 3701/* 3702 * Build an appropriate transfer negotiation message for the 3703 * currently active target. 3704 */ 3705static void 3706ahd_build_transfer_msg(struct ahd_softc *ahd, struct ahd_devinfo *devinfo) 3707{ 3708 /* 3709 * We need to initiate transfer negotiations. 3710 * If our current and goal settings are identical, 3711 * we want to renegotiate due to a check condition. 3712 */ 3713 struct ahd_initiator_tinfo *tinfo; 3714 struct ahd_tmode_tstate *tstate; 3715 int dowide; 3716 int dosync; 3717 int doppr; 3718 u_int period; 3719 u_int ppr_options; 3720 u_int offset; 3721 3722 tinfo = ahd_fetch_transinfo(ahd, devinfo->channel, devinfo->our_scsiid, 3723 devinfo->target, &tstate); 3724 /* 3725 * Filter our period based on the current connection. 3726 * If we can't perform DT transfers on this segment (not in LVD 3727 * mode for instance), then our decision to issue a PPR message 3728 * may change. 3729 */ 3730 period = tinfo->goal.period; 3731 offset = tinfo->goal.offset; 3732 ppr_options = tinfo->goal.ppr_options; 3733 /* Target initiated PPR is not allowed in the SCSI spec */ 3734 if (devinfo->role == ROLE_TARGET) 3735 ppr_options = 0; 3736 ahd_devlimited_syncrate(ahd, tinfo, &period, 3737 &ppr_options, devinfo->role); 3738 dowide = tinfo->curr.width != tinfo->goal.width; 3739 dosync = tinfo->curr.offset != offset || tinfo->curr.period != period; 3740 /* 3741 * Only use PPR if we have options that need it, even if the device 3742 * claims to support it. There might be an expander in the way 3743 * that doesn't. 3744 */ 3745 doppr = ppr_options != 0; 3746 3747 if (!dowide && !dosync && !doppr) { 3748 dowide = tinfo->goal.width != MSG_EXT_WDTR_BUS_8_BIT; 3749 dosync = tinfo->goal.offset != 0; 3750 } 3751 3752 if (!dowide && !dosync && !doppr) { 3753 /* 3754 * Force async with a WDTR message if we have a wide bus, 3755 * or just issue an SDTR with a 0 offset. 3756 */ 3757 if ((ahd->features & AHD_WIDE) != 0) 3758 dowide = 1; 3759 else 3760 dosync = 1; 3761 3762 if (bootverbose) { 3763 ahd_print_devinfo(ahd, devinfo); 3764 printf("Ensuring async\n"); 3765 } 3766 } 3767 /* Target initiated PPR is not allowed in the SCSI spec */ 3768 if (devinfo->role == ROLE_TARGET) 3769 doppr = 0; 3770 3771 /* 3772 * Both the PPR message and SDTR message require the 3773 * goal syncrate to be limited to what the target device 3774 * is capable of handling (based on whether an LVD->SE 3775 * expander is on the bus), so combine these two cases. 3776 * Regardless, guarantee that if we are using WDTR and SDTR 3777 * messages that WDTR comes first. 3778 */ 3779 if (doppr || (dosync && !dowide)) { 3780 3781 offset = tinfo->goal.offset; 3782 ahd_validate_offset(ahd, tinfo, period, &offset, 3783 doppr ? tinfo->goal.width 3784 : tinfo->curr.width, 3785 devinfo->role); 3786 if (doppr) { 3787 ahd_construct_ppr(ahd, devinfo, period, offset, 3788 tinfo->goal.width, ppr_options); 3789 } else { 3790 ahd_construct_sdtr(ahd, devinfo, period, offset); 3791 } 3792 } else { 3793 ahd_construct_wdtr(ahd, devinfo, tinfo->goal.width); 3794 } 3795} 3796 3797/* 3798 * Build a synchronous negotiation message in our message 3799 * buffer based on the input parameters. 3800 */ 3801static void 3802ahd_construct_sdtr(struct ahd_softc *ahd, struct ahd_devinfo *devinfo, 3803 u_int period, u_int offset) 3804{ 3805 if (offset == 0) 3806 period = AHD_ASYNC_XFER_PERIOD; 3807 ahd->msgout_buf[ahd->msgout_index++] = MSG_EXTENDED; 3808 ahd->msgout_buf[ahd->msgout_index++] = MSG_EXT_SDTR_LEN; 3809 ahd->msgout_buf[ahd->msgout_index++] = MSG_EXT_SDTR; 3810 ahd->msgout_buf[ahd->msgout_index++] = period; 3811 ahd->msgout_buf[ahd->msgout_index++] = offset; 3812 ahd->msgout_len += 5; 3813 if (bootverbose) { 3814 printf("(%s:%c:%d:%d): Sending SDTR period %x, offset %x\n", 3815 ahd_name(ahd), devinfo->channel, devinfo->target, 3816 devinfo->lun, period, offset); 3817 } 3818} 3819 3820/* 3821 * Build a wide negotiateion message in our message 3822 * buffer based on the input parameters. 3823 */ 3824static void 3825ahd_construct_wdtr(struct ahd_softc *ahd, struct ahd_devinfo *devinfo, 3826 u_int bus_width) 3827{ 3828 ahd->msgout_buf[ahd->msgout_index++] = MSG_EXTENDED; 3829 ahd->msgout_buf[ahd->msgout_index++] = MSG_EXT_WDTR_LEN; 3830 ahd->msgout_buf[ahd->msgout_index++] = MSG_EXT_WDTR; 3831 ahd->msgout_buf[ahd->msgout_index++] = bus_width; 3832 ahd->msgout_len += 4; 3833 if (bootverbose) { 3834 printf("(%s:%c:%d:%d): Sending WDTR %x\n", 3835 ahd_name(ahd), devinfo->channel, devinfo->target, 3836 devinfo->lun, bus_width); 3837 } 3838} 3839 3840/* 3841 * Build a parallel protocol request message in our message 3842 * buffer based on the input parameters. 3843 */ 3844static void 3845ahd_construct_ppr(struct ahd_softc *ahd, struct ahd_devinfo *devinfo, 3846 u_int period, u_int offset, u_int bus_width, 3847 u_int ppr_options) 3848{ 3849 /* 3850 * Always request precompensation from 3851 * the other target if we are running 3852 * at paced syncrates. 3853 */ 3854 if (period <= AHD_SYNCRATE_PACED) 3855 ppr_options |= MSG_EXT_PPR_PCOMP_EN; 3856 if (offset == 0) 3857 period = AHD_ASYNC_XFER_PERIOD; 3858 ahd->msgout_buf[ahd->msgout_index++] = MSG_EXTENDED; 3859 ahd->msgout_buf[ahd->msgout_index++] = MSG_EXT_PPR_LEN; 3860 ahd->msgout_buf[ahd->msgout_index++] = MSG_EXT_PPR; 3861 ahd->msgout_buf[ahd->msgout_index++] = period; 3862 ahd->msgout_buf[ahd->msgout_index++] = 0; 3863 ahd->msgout_buf[ahd->msgout_index++] = offset; 3864 ahd->msgout_buf[ahd->msgout_index++] = bus_width; 3865 ahd->msgout_buf[ahd->msgout_index++] = ppr_options; 3866 ahd->msgout_len += 8; 3867 if (bootverbose) { 3868 printf("(%s:%c:%d:%d): Sending PPR bus_width %x, period %x, " 3869 "offset %x, ppr_options %x\n", ahd_name(ahd), 3870 devinfo->channel, devinfo->target, devinfo->lun, 3871 bus_width, period, offset, ppr_options); 3872 } 3873} 3874 3875/* 3876 * Clear any active message state. 3877 */ 3878static void 3879ahd_clear_msg_state(struct ahd_softc *ahd) 3880{ 3881 ahd_mode_state saved_modes; 3882 3883 saved_modes = ahd_save_modes(ahd); 3884 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 3885 ahd->send_msg_perror = 0; 3886 ahd->msg_flags = MSG_FLAG_NONE; 3887 ahd->msgout_len = 0; 3888 ahd->msgin_index = 0; 3889 ahd->msg_type = MSG_TYPE_NONE; 3890 if ((ahd_inb(ahd, SCSISIGO) & ATNO) != 0) { 3891 /* 3892 * The target didn't care to respond to our 3893 * message request, so clear ATN. 3894 */ 3895 ahd_outb(ahd, CLRSINT1, CLRATNO); 3896 } 3897 ahd_outb(ahd, MSG_OUT, MSG_NOOP); 3898 ahd_outb(ahd, SEQ_FLAGS2, 3899 ahd_inb(ahd, SEQ_FLAGS2) & ~TARGET_MSG_PENDING); 3900 ahd_restore_modes(ahd, saved_modes); 3901} 3902 3903/* 3904 * Manual message loop handler. 3905 */ 3906static void 3907ahd_handle_message_phase(struct ahd_softc *ahd) 3908{ 3909 struct ahd_devinfo devinfo; 3910 u_int bus_phase; 3911 int end_session; 3912 3913 ahd_fetch_devinfo(ahd, &devinfo); 3914 end_session = FALSE; 3915 bus_phase = ahd_inb(ahd, LASTPHASE); 3916 3917 if ((ahd_inb(ahd, LQISTAT2) & LQIPHASE_OUTPKT) != 0) { 3918 printf("LQIRETRY for LQIPHASE_OUTPKT\n"); 3919 ahd_outb(ahd, LQCTL2, LQIRETRY); 3920 } 3921reswitch: 3922 switch (ahd->msg_type) { 3923 case MSG_TYPE_INITIATOR_MSGOUT: 3924 { 3925 int lastbyte; 3926 int phasemis; 3927 int msgdone; 3928 3929 if (ahd->msgout_len == 0 && ahd->send_msg_perror == 0) 3930 panic("HOST_MSG_LOOP interrupt with no active message"); 3931 3932#ifdef AHD_DEBUG 3933 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0) { 3934 ahd_print_devinfo(ahd, &devinfo); 3935 printf("INITIATOR_MSG_OUT"); 3936 } 3937#endif 3938 phasemis = bus_phase != P_MESGOUT; 3939 if (phasemis) { 3940#ifdef AHD_DEBUG 3941 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0) { 3942 printf(" PHASEMIS %s\n", 3943 ahd_lookup_phase_entry(bus_phase) 3944 ->phasemsg); 3945 } 3946#endif 3947 if (bus_phase == P_MESGIN) { 3948 /* 3949 * Change gears and see if 3950 * this messages is of interest to 3951 * us or should be passed back to 3952 * the sequencer. 3953 */ 3954 ahd_outb(ahd, CLRSINT1, CLRATNO); 3955 ahd->send_msg_perror = 0; 3956 ahd->msg_type = MSG_TYPE_INITIATOR_MSGIN; 3957 ahd->msgin_index = 0; 3958 goto reswitch; 3959 } 3960 end_session = TRUE; 3961 break; 3962 } 3963 3964 if (ahd->send_msg_perror) { 3965 ahd_outb(ahd, CLRSINT1, CLRATNO); 3966 ahd_outb(ahd, CLRSINT1, CLRREQINIT); 3967#ifdef AHD_DEBUG 3968 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0) 3969 printf(" byte 0x%x\n", ahd->send_msg_perror); 3970#endif 3971 /* 3972 * If we are notifying the target of a CRC error 3973 * during packetized operations, the target is 3974 * within its rights to acknowledge our message 3975 * with a busfree. 3976 */ 3977 if ((ahd->msg_flags & MSG_FLAG_PACKETIZED) != 0 3978 && ahd->send_msg_perror == MSG_INITIATOR_DET_ERR) 3979 ahd->msg_flags |= MSG_FLAG_EXPECT_IDE_BUSFREE; 3980 3981 ahd_outb(ahd, RETURN_2, ahd->send_msg_perror); 3982 ahd_outb(ahd, RETURN_1, CONT_MSG_LOOP_WRITE); 3983 break; 3984 } 3985 3986 msgdone = ahd->msgout_index == ahd->msgout_len; 3987 if (msgdone) { 3988 /* 3989 * The target has requested a retry. 3990 * Re-assert ATN, reset our message index to 3991 * 0, and try again. 3992 */ 3993 ahd->msgout_index = 0; 3994 ahd_assert_atn(ahd); 3995 } 3996 3997 lastbyte = ahd->msgout_index == (ahd->msgout_len - 1); 3998 if (lastbyte) { 3999 /* Last byte is signified by dropping ATN */ 4000 ahd_outb(ahd, CLRSINT1, CLRATNO); 4001 } 4002 4003 /* 4004 * Clear our interrupt status and present 4005 * the next byte on the bus. 4006 */ 4007 ahd_outb(ahd, CLRSINT1, CLRREQINIT); 4008#ifdef AHD_DEBUG 4009 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0) 4010 printf(" byte 0x%x\n", 4011 ahd->msgout_buf[ahd->msgout_index]); 4012#endif 4013 ahd_outb(ahd, RETURN_2, ahd->msgout_buf[ahd->msgout_index++]); 4014 ahd_outb(ahd, RETURN_1, CONT_MSG_LOOP_WRITE); 4015 break; 4016 } 4017 case MSG_TYPE_INITIATOR_MSGIN: 4018 { 4019 int phasemis; 4020 int message_done; 4021 4022#ifdef AHD_DEBUG 4023 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0) { 4024 ahd_print_devinfo(ahd, &devinfo); 4025 printf("INITIATOR_MSG_IN"); 4026 } 4027#endif 4028 phasemis = bus_phase != P_MESGIN; 4029 if (phasemis) { 4030#ifdef AHD_DEBUG 4031 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0) { 4032 printf(" PHASEMIS %s\n", 4033 ahd_lookup_phase_entry(bus_phase) 4034 ->phasemsg); 4035 } 4036#endif 4037 ahd->msgin_index = 0; 4038 if (bus_phase == P_MESGOUT 4039 && (ahd->send_msg_perror != 0 4040 || (ahd->msgout_len != 0 4041 && ahd->msgout_index == 0))) { 4042 ahd->msg_type = MSG_TYPE_INITIATOR_MSGOUT; 4043 goto reswitch; 4044 } 4045 end_session = TRUE; 4046 break; 4047 } 4048 4049 /* Pull the byte in without acking it */ 4050 ahd->msgin_buf[ahd->msgin_index] = ahd_inb(ahd, SCSIBUS); 4051#ifdef AHD_DEBUG 4052 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0) 4053 printf(" byte 0x%x\n", 4054 ahd->msgin_buf[ahd->msgin_index]); 4055#endif 4056 4057 message_done = ahd_parse_msg(ahd, &devinfo); 4058 4059 if (message_done) { 4060 /* 4061 * Clear our incoming message buffer in case there 4062 * is another message following this one. 4063 */ 4064 ahd->msgin_index = 0; 4065 4066 /* 4067 * If this message illicited a response, 4068 * assert ATN so the target takes us to the 4069 * message out phase. 4070 */ 4071 if (ahd->msgout_len != 0) { 4072#ifdef AHD_DEBUG 4073 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0) { 4074 ahd_print_devinfo(ahd, &devinfo); 4075 printf("Asserting ATN for response\n"); 4076 } 4077#endif 4078 ahd_assert_atn(ahd); 4079 } 4080 } else 4081 ahd->msgin_index++; 4082 4083 if (message_done == MSGLOOP_TERMINATED) { 4084 end_session = TRUE; 4085 } else { 4086 /* Ack the byte */ 4087 ahd_outb(ahd, CLRSINT1, CLRREQINIT); 4088 ahd_outb(ahd, RETURN_1, CONT_MSG_LOOP_READ); 4089 } 4090 break; 4091 } 4092 case MSG_TYPE_TARGET_MSGIN: 4093 { 4094 int msgdone; 4095 int msgout_request; 4096 4097 /* 4098 * By default, the message loop will continue. 4099 */ 4100 ahd_outb(ahd, RETURN_1, CONT_MSG_LOOP_TARG); 4101 4102 if (ahd->msgout_len == 0) 4103 panic("Target MSGIN with no active message"); 4104 4105 /* 4106 * If we interrupted a mesgout session, the initiator 4107 * will not know this until our first REQ. So, we 4108 * only honor mesgout requests after we've sent our 4109 * first byte. 4110 */ 4111 if ((ahd_inb(ahd, SCSISIGI) & ATNI) != 0 4112 && ahd->msgout_index > 0) 4113 msgout_request = TRUE; 4114 else 4115 msgout_request = FALSE; 4116 4117 if (msgout_request) { 4118 4119 /* 4120 * Change gears and see if 4121 * this messages is of interest to 4122 * us or should be passed back to 4123 * the sequencer. 4124 */ 4125 ahd->msg_type = MSG_TYPE_TARGET_MSGOUT; 4126 ahd_outb(ahd, SCSISIGO, P_MESGOUT | BSYO); 4127 ahd->msgin_index = 0; 4128 /* Dummy read to REQ for first byte */ 4129 ahd_inb(ahd, SCSIDAT); 4130 ahd_outb(ahd, SXFRCTL0, 4131 ahd_inb(ahd, SXFRCTL0) | SPIOEN); 4132 break; 4133 } 4134 4135 msgdone = ahd->msgout_index == ahd->msgout_len; 4136 if (msgdone) { 4137 ahd_outb(ahd, SXFRCTL0, 4138 ahd_inb(ahd, SXFRCTL0) & ~SPIOEN); 4139 end_session = TRUE; 4140 break; 4141 } 4142 4143 /* 4144 * Present the next byte on the bus. 4145 */ 4146 ahd_outb(ahd, SXFRCTL0, ahd_inb(ahd, SXFRCTL0) | SPIOEN); 4147 ahd_outb(ahd, SCSIDAT, ahd->msgout_buf[ahd->msgout_index++]); 4148 break; 4149 } 4150 case MSG_TYPE_TARGET_MSGOUT: 4151 { 4152 int lastbyte; 4153 int msgdone; 4154 4155 /* 4156 * By default, the message loop will continue. 4157 */ 4158 ahd_outb(ahd, RETURN_1, CONT_MSG_LOOP_TARG); 4159 4160 /* 4161 * The initiator signals that this is 4162 * the last byte by dropping ATN. 4163 */ 4164 lastbyte = (ahd_inb(ahd, SCSISIGI) & ATNI) == 0; 4165 4166 /* 4167 * Read the latched byte, but turn off SPIOEN first 4168 * so that we don't inadvertently cause a REQ for the 4169 * next byte. 4170 */ 4171 ahd_outb(ahd, SXFRCTL0, ahd_inb(ahd, SXFRCTL0) & ~SPIOEN); 4172 ahd->msgin_buf[ahd->msgin_index] = ahd_inb(ahd, SCSIDAT); 4173 msgdone = ahd_parse_msg(ahd, &devinfo); 4174 if (msgdone == MSGLOOP_TERMINATED) { 4175 /* 4176 * The message is *really* done in that it caused 4177 * us to go to bus free. The sequencer has already 4178 * been reset at this point, so pull the ejection 4179 * handle. 4180 */ 4181 return; 4182 } 4183 4184 ahd->msgin_index++; 4185 4186 /* 4187 * XXX Read spec about initiator dropping ATN too soon 4188 * and use msgdone to detect it. 4189 */ 4190 if (msgdone == MSGLOOP_MSGCOMPLETE) { 4191 ahd->msgin_index = 0; 4192 4193 /* 4194 * If this message illicited a response, transition 4195 * to the Message in phase and send it. 4196 */ 4197 if (ahd->msgout_len != 0) { 4198 ahd_outb(ahd, SCSISIGO, P_MESGIN | BSYO); 4199 ahd_outb(ahd, SXFRCTL0, 4200 ahd_inb(ahd, SXFRCTL0) | SPIOEN); 4201 ahd->msg_type = MSG_TYPE_TARGET_MSGIN; 4202 ahd->msgin_index = 0; 4203 break; 4204 } 4205 } 4206 4207 if (lastbyte) 4208 end_session = TRUE; 4209 else { 4210 /* Ask for the next byte. */ 4211 ahd_outb(ahd, SXFRCTL0, 4212 ahd_inb(ahd, SXFRCTL0) | SPIOEN); 4213 } 4214 4215 break; 4216 } 4217 default: 4218 panic("Unknown REQINIT message type"); 4219 } 4220 4221 if (end_session) { 4222 if ((ahd->msg_flags & MSG_FLAG_PACKETIZED) != 0) { 4223 printf("%s: Returning to Idle Loop\n", 4224 ahd_name(ahd)); 4225 ahd_clear_msg_state(ahd); 4226 4227 /* 4228 * Perform the equivalent of a clear_target_state. 4229 */ 4230 ahd_outb(ahd, LASTPHASE, P_BUSFREE); 4231 ahd_outb(ahd, SEQ_FLAGS, NOT_IDENTIFIED|NO_CDB_SENT); 4232 ahd_outb(ahd, SEQCTL0, FASTMODE|SEQRESET); 4233 } else { 4234 ahd_clear_msg_state(ahd); 4235 ahd_outb(ahd, RETURN_1, EXIT_MSG_LOOP); 4236 } 4237 } 4238} 4239 4240/* 4241 * See if we sent a particular extended message to the target. 4242 * If "full" is true, return true only if the target saw the full 4243 * message. If "full" is false, return true if the target saw at 4244 * least the first byte of the message. 4245 */ 4246static int 4247ahd_sent_msg(struct ahd_softc *ahd, ahd_msgtype type, u_int msgval, int full) 4248{ 4249 int found; 4250 u_int index; 4251 4252 found = FALSE; 4253 index = 0; 4254 4255 while (index < ahd->msgout_len) { 4256 if (ahd->msgout_buf[index] == MSG_EXTENDED) { 4257 u_int end_index; 4258 4259 end_index = index + 1 + ahd->msgout_buf[index + 1]; 4260 if (ahd->msgout_buf[index+2] == msgval 4261 && type == AHDMSG_EXT) { 4262 4263 if (full) { 4264 if (ahd->msgout_index > end_index) 4265 found = TRUE; 4266 } else if (ahd->msgout_index > index) 4267 found = TRUE; 4268 } 4269 index = end_index; 4270 } else if (ahd->msgout_buf[index] >= MSG_SIMPLE_TASK 4271 && ahd->msgout_buf[index] <= MSG_IGN_WIDE_RESIDUE) { 4272 4273 /* Skip tag type and tag id or residue param*/ 4274 index += 2; 4275 } else { 4276 /* Single byte message */ 4277 if (type == AHDMSG_1B 4278 && ahd->msgout_index > index 4279 && (ahd->msgout_buf[index] == msgval 4280 || ((ahd->msgout_buf[index] & MSG_IDENTIFYFLAG) != 0 4281 && msgval == MSG_IDENTIFYFLAG))) 4282 found = TRUE; 4283 index++; 4284 } 4285 4286 if (found) 4287 break; 4288 } 4289 return (found); 4290} 4291 4292/* 4293 * Wait for a complete incoming message, parse it, and respond accordingly. 4294 */ 4295static int 4296ahd_parse_msg(struct ahd_softc *ahd, struct ahd_devinfo *devinfo) 4297{ 4298 struct ahd_initiator_tinfo *tinfo; 4299 struct ahd_tmode_tstate *tstate; 4300 int reject; 4301 int done; 4302 int response; 4303 4304 done = MSGLOOP_IN_PROG; 4305 response = FALSE; 4306 reject = FALSE; 4307 tinfo = ahd_fetch_transinfo(ahd, devinfo->channel, devinfo->our_scsiid, 4308 devinfo->target, &tstate); 4309 4310 /* 4311 * Parse as much of the message as is available, 4312 * rejecting it if we don't support it. When 4313 * the entire message is available and has been 4314 * handled, return MSGLOOP_MSGCOMPLETE, indicating 4315 * that we have parsed an entire message. 4316 * 4317 * In the case of extended messages, we accept the length 4318 * byte outright and perform more checking once we know the 4319 * extended message type. 4320 */ 4321 switch (ahd->msgin_buf[0]) { 4322 case MSG_DISCONNECT: 4323 case MSG_SAVEDATAPOINTER: 4324 case MSG_CMDCOMPLETE: 4325 case MSG_RESTOREPOINTERS: 4326 case MSG_IGN_WIDE_RESIDUE: 4327 /* 4328 * End our message loop as these are messages 4329 * the sequencer handles on its own. 4330 */ 4331 done = MSGLOOP_TERMINATED; 4332 break; 4333 case MSG_MESSAGE_REJECT: 4334 response = ahd_handle_msg_reject(ahd, devinfo); 4335 /* FALLTHROUGH */ 4336 case MSG_NOOP: 4337 done = MSGLOOP_MSGCOMPLETE; 4338 break; 4339 case MSG_EXTENDED: 4340 { 4341 /* Wait for enough of the message to begin validation */ 4342 if (ahd->msgin_index < 2) 4343 break; 4344 switch (ahd->msgin_buf[2]) { 4345 case MSG_EXT_SDTR: 4346 { 4347 u_int period; 4348 u_int ppr_options; 4349 u_int offset; 4350 u_int saved_offset; 4351 4352 if (ahd->msgin_buf[1] != MSG_EXT_SDTR_LEN) { 4353 reject = TRUE; 4354 break; 4355 } 4356 4357 /* 4358 * Wait until we have both args before validating 4359 * and acting on this message. 4360 * 4361 * Add one to MSG_EXT_SDTR_LEN to account for 4362 * the extended message preamble. 4363 */ 4364 if (ahd->msgin_index < (MSG_EXT_SDTR_LEN + 1)) 4365 break; 4366 4367 period = ahd->msgin_buf[3]; 4368 ppr_options = 0; 4369 saved_offset = offset = ahd->msgin_buf[4]; 4370 ahd_devlimited_syncrate(ahd, tinfo, &period, 4371 &ppr_options, devinfo->role); 4372 ahd_validate_offset(ahd, tinfo, period, &offset, 4373 tinfo->curr.width, devinfo->role); 4374 if (bootverbose) { 4375 printf("(%s:%c:%d:%d): Received " 4376 "SDTR period %x, offset %x\n\t" 4377 "Filtered to period %x, offset %x\n", 4378 ahd_name(ahd), devinfo->channel, 4379 devinfo->target, devinfo->lun, 4380 ahd->msgin_buf[3], saved_offset, 4381 period, offset); 4382 } 4383 ahd_set_syncrate(ahd, devinfo, period, 4384 offset, ppr_options, 4385 AHD_TRANS_ACTIVE|AHD_TRANS_GOAL, 4386 /*paused*/TRUE); 4387 4388 /* 4389 * See if we initiated Sync Negotiation 4390 * and didn't have to fall down to async 4391 * transfers. 4392 */ 4393 if (ahd_sent_msg(ahd, AHDMSG_EXT, MSG_EXT_SDTR, TRUE)) { 4394 /* We started it */ 4395 if (saved_offset != offset) { 4396 /* Went too low - force async */ 4397 reject = TRUE; 4398 } 4399 } else { 4400 /* 4401 * Send our own SDTR in reply 4402 */ 4403 if (bootverbose 4404 && devinfo->role == ROLE_INITIATOR) { 4405 printf("(%s:%c:%d:%d): Target " 4406 "Initiated SDTR\n", 4407 ahd_name(ahd), devinfo->channel, 4408 devinfo->target, devinfo->lun); 4409 } 4410 ahd->msgout_index = 0; 4411 ahd->msgout_len = 0; 4412 ahd_construct_sdtr(ahd, devinfo, 4413 period, offset); 4414 ahd->msgout_index = 0; 4415 response = TRUE; 4416 } 4417 done = MSGLOOP_MSGCOMPLETE; 4418 break; 4419 } 4420 case MSG_EXT_WDTR: 4421 { 4422 u_int bus_width; 4423 u_int saved_width; 4424 u_int sending_reply; 4425 4426 sending_reply = FALSE; 4427 if (ahd->msgin_buf[1] != MSG_EXT_WDTR_LEN) { 4428 reject = TRUE; 4429 break; 4430 } 4431 4432 /* 4433 * Wait until we have our arg before validating 4434 * and acting on this message. 4435 * 4436 * Add one to MSG_EXT_WDTR_LEN to account for 4437 * the extended message preamble. 4438 */ 4439 if (ahd->msgin_index < (MSG_EXT_WDTR_LEN + 1)) 4440 break; 4441 4442 bus_width = ahd->msgin_buf[3]; 4443 saved_width = bus_width; 4444 ahd_validate_width(ahd, tinfo, &bus_width, 4445 devinfo->role); 4446 if (bootverbose) { 4447 printf("(%s:%c:%d:%d): Received WDTR " 4448 "%x filtered to %x\n", 4449 ahd_name(ahd), devinfo->channel, 4450 devinfo->target, devinfo->lun, 4451 saved_width, bus_width); 4452 } 4453 4454 if (ahd_sent_msg(ahd, AHDMSG_EXT, MSG_EXT_WDTR, TRUE)) { 4455 /* 4456 * Don't send a WDTR back to the 4457 * target, since we asked first. 4458 * If the width went higher than our 4459 * request, reject it. 4460 */ 4461 if (saved_width > bus_width) { 4462 reject = TRUE; 4463 printf("(%s:%c:%d:%d): requested %dBit " 4464 "transfers. Rejecting...\n", 4465 ahd_name(ahd), devinfo->channel, 4466 devinfo->target, devinfo->lun, 4467 8 * (0x01 << bus_width)); 4468 bus_width = 0; 4469 } 4470 } else { 4471 /* 4472 * Send our own WDTR in reply 4473 */ 4474 if (bootverbose 4475 && devinfo->role == ROLE_INITIATOR) { 4476 printf("(%s:%c:%d:%d): Target " 4477 "Initiated WDTR\n", 4478 ahd_name(ahd), devinfo->channel, 4479 devinfo->target, devinfo->lun); 4480 } 4481 ahd->msgout_index = 0; 4482 ahd->msgout_len = 0; 4483 ahd_construct_wdtr(ahd, devinfo, bus_width); 4484 ahd->msgout_index = 0; 4485 response = TRUE; 4486 sending_reply = TRUE; 4487 } 4488 /* 4489 * After a wide message, we are async, but 4490 * some devices don't seem to honor this portion 4491 * of the spec. Force a renegotiation of the 4492 * sync component of our transfer agreement even 4493 * if our goal is async. By updating our width 4494 * after forcing the negotiation, we avoid 4495 * renegotiating for width. 4496 */ 4497 ahd_update_neg_request(ahd, devinfo, tstate, 4498 tinfo, AHD_NEG_ALWAYS); 4499 ahd_set_width(ahd, devinfo, bus_width, 4500 AHD_TRANS_ACTIVE|AHD_TRANS_GOAL, 4501 /*paused*/TRUE); 4502 if (sending_reply == FALSE && reject == FALSE) { 4503 4504 /* 4505 * We will always have an SDTR to send. 4506 */ 4507 ahd->msgout_index = 0; 4508 ahd->msgout_len = 0; 4509 ahd_build_transfer_msg(ahd, devinfo); 4510 ahd->msgout_index = 0; 4511 response = TRUE; 4512 } 4513 done = MSGLOOP_MSGCOMPLETE; 4514 break; 4515 } 4516 case MSG_EXT_PPR: 4517 { 4518 u_int period; 4519 u_int offset; 4520 u_int bus_width; 4521 u_int ppr_options; 4522 u_int saved_width; 4523 u_int saved_offset; 4524 u_int saved_ppr_options; 4525 4526 if (ahd->msgin_buf[1] != MSG_EXT_PPR_LEN) { 4527 reject = TRUE; 4528 break; 4529 } 4530 4531 /* 4532 * Wait until we have all args before validating 4533 * and acting on this message. 4534 * 4535 * Add one to MSG_EXT_PPR_LEN to account for 4536 * the extended message preamble. 4537 */ 4538 if (ahd->msgin_index < (MSG_EXT_PPR_LEN + 1)) 4539 break; 4540 4541 period = ahd->msgin_buf[3]; 4542 offset = ahd->msgin_buf[5]; 4543 bus_width = ahd->msgin_buf[6]; 4544 saved_width = bus_width; 4545 ppr_options = ahd->msgin_buf[7]; 4546 /* 4547 * According to the spec, a DT only 4548 * period factor with no DT option 4549 * set implies async. 4550 */ 4551 if ((ppr_options & MSG_EXT_PPR_DT_REQ) == 0 4552 && period <= 9) 4553 offset = 0; 4554 saved_ppr_options = ppr_options; 4555 saved_offset = offset; 4556 4557 /* 4558 * Transfer options are only available if we 4559 * are negotiating wide. 4560 */ 4561 if (bus_width == 0) 4562 ppr_options &= MSG_EXT_PPR_QAS_REQ; 4563 4564 ahd_validate_width(ahd, tinfo, &bus_width, 4565 devinfo->role); 4566 ahd_devlimited_syncrate(ahd, tinfo, &period, 4567 &ppr_options, devinfo->role); 4568 ahd_validate_offset(ahd, tinfo, period, &offset, 4569 bus_width, devinfo->role); 4570 4571 if (ahd_sent_msg(ahd, AHDMSG_EXT, MSG_EXT_PPR, TRUE)) { 4572 /* 4573 * If we are unable to do any of the 4574 * requested options (we went too low), 4575 * then we'll have to reject the message. 4576 */ 4577 if (saved_width > bus_width 4578 || saved_offset != offset 4579 || saved_ppr_options != ppr_options) { 4580 reject = TRUE; 4581 period = 0; 4582 offset = 0; 4583 bus_width = 0; 4584 ppr_options = 0; 4585 } 4586 } else { 4587 if (devinfo->role != ROLE_TARGET) 4588 printf("(%s:%c:%d:%d): Target " 4589 "Initiated PPR\n", 4590 ahd_name(ahd), devinfo->channel, 4591 devinfo->target, devinfo->lun); 4592 else 4593 printf("(%s:%c:%d:%d): Initiator " 4594 "Initiated PPR\n", 4595 ahd_name(ahd), devinfo->channel, 4596 devinfo->target, devinfo->lun); 4597 ahd->msgout_index = 0; 4598 ahd->msgout_len = 0; 4599 ahd_construct_ppr(ahd, devinfo, period, offset, 4600 bus_width, ppr_options); 4601 ahd->msgout_index = 0; 4602 response = TRUE; 4603 } 4604 if (bootverbose) { 4605 printf("(%s:%c:%d:%d): Received PPR width %x, " 4606 "period %x, offset %x,options %x\n" 4607 "\tFiltered to width %x, period %x, " 4608 "offset %x, options %x\n", 4609 ahd_name(ahd), devinfo->channel, 4610 devinfo->target, devinfo->lun, 4611 saved_width, ahd->msgin_buf[3], 4612 saved_offset, saved_ppr_options, 4613 bus_width, period, offset, ppr_options); 4614 } 4615 ahd_set_width(ahd, devinfo, bus_width, 4616 AHD_TRANS_ACTIVE|AHD_TRANS_GOAL, 4617 /*paused*/TRUE); 4618 ahd_set_syncrate(ahd, devinfo, period, 4619 offset, ppr_options, 4620 AHD_TRANS_ACTIVE|AHD_TRANS_GOAL, 4621 /*paused*/TRUE); 4622 4623 done = MSGLOOP_MSGCOMPLETE; 4624 break; 4625 } 4626 default: 4627 /* Unknown extended message. Reject it. */ 4628 reject = TRUE; 4629 break; 4630 } 4631 break; 4632 } 4633#ifdef AHD_TARGET_MODE 4634 case MSG_BUS_DEV_RESET: 4635 ahd_handle_devreset(ahd, devinfo, CAM_LUN_WILDCARD, 4636 CAM_BDR_SENT, 4637 "Bus Device Reset Received", 4638 /*verbose_level*/0); 4639 ahd_restart(ahd); 4640 done = MSGLOOP_TERMINATED; 4641 break; 4642 case MSG_ABORT_TAG: 4643 case MSG_ABORT: 4644 case MSG_CLEAR_QUEUE: 4645 { 4646 int tag; 4647 4648 /* Target mode messages */ 4649 if (devinfo->role != ROLE_TARGET) { 4650 reject = TRUE; 4651 break; 4652 } 4653 tag = SCB_LIST_NULL; 4654 if (ahd->msgin_buf[0] == MSG_ABORT_TAG) 4655 tag = ahd_inb(ahd, INITIATOR_TAG); 4656 ahd_abort_scbs(ahd, devinfo->target, devinfo->channel, 4657 devinfo->lun, tag, ROLE_TARGET, 4658 CAM_REQ_ABORTED); 4659 4660 tstate = ahd->enabled_targets[devinfo->our_scsiid]; 4661 if (tstate != NULL) { 4662 struct ahd_tmode_lstate* lstate; 4663 4664 lstate = tstate->enabled_luns[devinfo->lun]; 4665 if (lstate != NULL) { 4666 ahd_queue_lstate_event(ahd, lstate, 4667 devinfo->our_scsiid, 4668 ahd->msgin_buf[0], 4669 /*arg*/tag); 4670 ahd_send_lstate_events(ahd, lstate); 4671 } 4672 } 4673 ahd_restart(ahd); 4674 done = MSGLOOP_TERMINATED; 4675 break; 4676 } 4677#endif 4678 case MSG_QAS_REQUEST: 4679#ifdef AHD_DEBUG 4680 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0) 4681 printf("%s: QAS request. SCSISIGI == 0x%x\n", 4682 ahd_name(ahd), ahd_inb(ahd, SCSISIGI)); 4683#endif 4684 ahd->msg_flags |= MSG_FLAG_EXPECT_QASREJ_BUSFREE; 4685 /* FALLTHROUGH */ 4686 case MSG_TERM_IO_PROC: 4687 default: 4688 reject = TRUE; 4689 break; 4690 } 4691 4692 if (reject) { 4693 /* 4694 * Setup to reject the message. 4695 */ 4696 ahd->msgout_index = 0; 4697 ahd->msgout_len = 1; 4698 ahd->msgout_buf[0] = MSG_MESSAGE_REJECT; 4699 done = MSGLOOP_MSGCOMPLETE; 4700 response = TRUE; 4701 } 4702 4703 if (done != MSGLOOP_IN_PROG && !response) 4704 /* Clear the outgoing message buffer */ 4705 ahd->msgout_len = 0; 4706 4707 return (done); 4708} 4709 4710/* 4711 * Process a message reject message. 4712 */ 4713static int 4714ahd_handle_msg_reject(struct ahd_softc *ahd, struct ahd_devinfo *devinfo) 4715{ 4716 /* 4717 * What we care about here is if we had an 4718 * outstanding SDTR or WDTR message for this 4719 * target. If we did, this is a signal that 4720 * the target is refusing negotiation. 4721 */ 4722 struct scb *scb; 4723 struct ahd_initiator_tinfo *tinfo; 4724 struct ahd_tmode_tstate *tstate; 4725 u_int scb_index; 4726 u_int last_msg; 4727 int response = 0; 4728 4729 scb_index = ahd_get_scbptr(ahd); 4730 scb = ahd_lookup_scb(ahd, scb_index); 4731 tinfo = ahd_fetch_transinfo(ahd, devinfo->channel, 4732 devinfo->our_scsiid, 4733 devinfo->target, &tstate); 4734 /* Might be necessary */ 4735 last_msg = ahd_inb(ahd, LAST_MSG); 4736 4737 if (ahd_sent_msg(ahd, AHDMSG_EXT, MSG_EXT_PPR, /*full*/FALSE)) { 4738 if (ahd_sent_msg(ahd, AHDMSG_EXT, MSG_EXT_PPR, /*full*/TRUE) 4739 && tinfo->goal.period <= AHD_SYNCRATE_PACED) { 4740 /* 4741 * Target may not like our SPI-4 PPR Options. 4742 * Attempt to negotiate 80MHz which will turn 4743 * off these options. 4744 */ 4745 if (bootverbose) { 4746 printf("(%s:%c:%d:%d): PPR Rejected. " 4747 "Trying simple U160 PPR\n", 4748 ahd_name(ahd), devinfo->channel, 4749 devinfo->target, devinfo->lun); 4750 } 4751 tinfo->goal.period = AHD_SYNCRATE_DT; 4752 tinfo->goal.ppr_options &= MSG_EXT_PPR_IU_REQ 4753 | MSG_EXT_PPR_QAS_REQ 4754 | MSG_EXT_PPR_DT_REQ; 4755 } else { 4756 /* 4757 * Target does not support the PPR message. 4758 * Attempt to negotiate SPI-2 style. 4759 */ 4760 if (bootverbose) { 4761 printf("(%s:%c:%d:%d): PPR Rejected. " 4762 "Trying WDTR/SDTR\n", 4763 ahd_name(ahd), devinfo->channel, 4764 devinfo->target, devinfo->lun); 4765 } 4766 tinfo->goal.ppr_options = 0; 4767 tinfo->curr.transport_version = 2; 4768 tinfo->goal.transport_version = 2; 4769 } 4770 ahd->msgout_index = 0; 4771 ahd->msgout_len = 0; 4772 ahd_build_transfer_msg(ahd, devinfo); 4773 ahd->msgout_index = 0; 4774 response = 1; 4775 } else if (ahd_sent_msg(ahd, AHDMSG_EXT, MSG_EXT_WDTR, /*full*/FALSE)) { 4776 4777 /* note 8bit xfers */ 4778 printf("(%s:%c:%d:%d): refuses WIDE negotiation. Using " 4779 "8bit transfers\n", ahd_name(ahd), 4780 devinfo->channel, devinfo->target, devinfo->lun); 4781 ahd_set_width(ahd, devinfo, MSG_EXT_WDTR_BUS_8_BIT, 4782 AHD_TRANS_ACTIVE|AHD_TRANS_GOAL, 4783 /*paused*/TRUE); 4784 /* 4785 * No need to clear the sync rate. If the target 4786 * did not accept the command, our syncrate is 4787 * unaffected. If the target started the negotiation, 4788 * but rejected our response, we already cleared the 4789 * sync rate before sending our WDTR. 4790 */ 4791 if (tinfo->goal.offset != tinfo->curr.offset) { 4792 4793 /* Start the sync negotiation */ 4794 ahd->msgout_index = 0; 4795 ahd->msgout_len = 0; 4796 ahd_build_transfer_msg(ahd, devinfo); 4797 ahd->msgout_index = 0; 4798 response = 1; 4799 } 4800 } else if (ahd_sent_msg(ahd, AHDMSG_EXT, MSG_EXT_SDTR, /*full*/FALSE)) { 4801 /* note asynch xfers and clear flag */ 4802 ahd_set_syncrate(ahd, devinfo, /*period*/0, 4803 /*offset*/0, /*ppr_options*/0, 4804 AHD_TRANS_ACTIVE|AHD_TRANS_GOAL, 4805 /*paused*/TRUE); 4806 printf("(%s:%c:%d:%d): refuses synchronous negotiation. " 4807 "Using asynchronous transfers\n", 4808 ahd_name(ahd), devinfo->channel, 4809 devinfo->target, devinfo->lun); 4810 } else if ((scb->hscb->control & MSG_SIMPLE_TASK) != 0) { 4811 int tag_type; 4812 int mask; 4813 4814 tag_type = (scb->hscb->control & MSG_SIMPLE_TASK); 4815 4816 if (tag_type == MSG_SIMPLE_TASK) { 4817 printf("(%s:%c:%d:%d): refuses tagged commands. " 4818 "Performing non-tagged I/O\n", ahd_name(ahd), 4819 devinfo->channel, devinfo->target, devinfo->lun); 4820 ahd_set_tags(ahd, devinfo, AHD_QUEUE_NONE); 4821 mask = ~0x23; 4822 } else { 4823 printf("(%s:%c:%d:%d): refuses %s tagged commands. " 4824 "Performing simple queue tagged I/O only\n", 4825 ahd_name(ahd), devinfo->channel, devinfo->target, 4826 devinfo->lun, tag_type == MSG_ORDERED_TASK 4827 ? "ordered" : "head of queue"); 4828 ahd_set_tags(ahd, devinfo, AHD_QUEUE_BASIC); 4829 mask = ~0x03; 4830 } 4831 4832 /* 4833 * Resend the identify for this CCB as the target 4834 * may believe that the selection is invalid otherwise. 4835 */ 4836 ahd_outb(ahd, SCB_CONTROL, 4837 ahd_inb_scbram(ahd, SCB_CONTROL) & mask); 4838 scb->hscb->control &= mask; 4839 aic_set_transaction_tag(scb, /*enabled*/FALSE, 4840 /*type*/MSG_SIMPLE_TASK); 4841 ahd_outb(ahd, MSG_OUT, MSG_IDENTIFYFLAG); 4842 ahd_assert_atn(ahd); 4843 ahd_busy_tcl(ahd, BUILD_TCL(scb->hscb->scsiid, devinfo->lun), 4844 SCB_GET_TAG(scb)); 4845 4846 /* 4847 * Requeue all tagged commands for this target 4848 * currently in our posession so they can be 4849 * converted to untagged commands. 4850 */ 4851 ahd_search_qinfifo(ahd, SCB_GET_TARGET(ahd, scb), 4852 SCB_GET_CHANNEL(ahd, scb), 4853 SCB_GET_LUN(scb), /*tag*/SCB_LIST_NULL, 4854 ROLE_INITIATOR, CAM_REQUEUE_REQ, 4855 SEARCH_COMPLETE); 4856 } else if (ahd_sent_msg(ahd, AHDMSG_1B, MSG_IDENTIFYFLAG, TRUE)) { 4857 /* 4858 * Most likely the device believes that we had 4859 * previously negotiated packetized. 4860 */ 4861 ahd->msg_flags |= MSG_FLAG_EXPECT_PPR_BUSFREE 4862 | MSG_FLAG_IU_REQ_CHANGED; 4863 4864 ahd_force_renegotiation(ahd, devinfo); 4865 ahd->msgout_index = 0; 4866 ahd->msgout_len = 0; 4867 ahd_build_transfer_msg(ahd, devinfo); 4868 ahd->msgout_index = 0; 4869 response = 1; 4870 } else { 4871 /* 4872 * Otherwise, we ignore it. 4873 */ 4874 printf("%s:%c:%d: Message reject for %x -- ignored\n", 4875 ahd_name(ahd), devinfo->channel, devinfo->target, 4876 last_msg); 4877 } 4878 return (response); 4879} 4880 4881/* 4882 * Process an ingnore wide residue message. 4883 */ 4884static void 4885ahd_handle_ign_wide_residue(struct ahd_softc *ahd, struct ahd_devinfo *devinfo) 4886{ 4887 u_int scb_index; 4888 struct scb *scb; 4889 4890 scb_index = ahd_get_scbptr(ahd); 4891 scb = ahd_lookup_scb(ahd, scb_index); 4892 /* 4893 * XXX Actually check data direction in the sequencer? 4894 * Perhaps add datadir to some spare bits in the hscb? 4895 */ 4896 if ((ahd_inb(ahd, SEQ_FLAGS) & DPHASE) == 0 4897 || aic_get_transfer_dir(scb) != CAM_DIR_IN) { 4898 /* 4899 * Ignore the message if we haven't 4900 * seen an appropriate data phase yet. 4901 */ 4902 } else { 4903 /* 4904 * If the residual occurred on the last 4905 * transfer and the transfer request was 4906 * expected to end on an odd count, do 4907 * nothing. Otherwise, subtract a byte 4908 * and update the residual count accordingly. 4909 */ 4910 uint32_t sgptr; 4911 4912 sgptr = ahd_inb_scbram(ahd, SCB_RESIDUAL_SGPTR); 4913 if ((sgptr & SG_LIST_NULL) != 0 4914 && (ahd_inb_scbram(ahd, SCB_TASK_ATTRIBUTE) 4915 & SCB_XFERLEN_ODD) != 0) { 4916 /* 4917 * If the residual occurred on the last 4918 * transfer and the transfer request was 4919 * expected to end on an odd count, do 4920 * nothing. 4921 */ 4922 } else { 4923 uint32_t data_cnt; 4924 uint64_t data_addr; 4925 uint32_t sglen; 4926 4927 /* Pull in the rest of the sgptr */ 4928 sgptr = ahd_inl_scbram(ahd, SCB_RESIDUAL_SGPTR); 4929 data_cnt = ahd_inl_scbram(ahd, SCB_RESIDUAL_DATACNT); 4930 if ((sgptr & SG_LIST_NULL) != 0) { 4931 /* 4932 * The residual data count is not updated 4933 * for the command run to completion case. 4934 * Explicitly zero the count. 4935 */ 4936 data_cnt &= ~AHD_SG_LEN_MASK; 4937 } 4938 data_addr = ahd_inq(ahd, SHADDR); 4939 data_cnt += 1; 4940 data_addr -= 1; 4941 sgptr &= SG_PTR_MASK; 4942 if ((ahd->flags & AHD_64BIT_ADDRESSING) != 0) { 4943 struct ahd_dma64_seg *sg; 4944 4945 sg = ahd_sg_bus_to_virt(ahd, scb, sgptr); 4946 4947 /* 4948 * The residual sg ptr points to the next S/G 4949 * to load so we must go back one. 4950 */ 4951 sg--; 4952 sglen = aic_le32toh(sg->len) & AHD_SG_LEN_MASK; 4953 if (sg != scb->sg_list 4954 && sglen < (data_cnt & AHD_SG_LEN_MASK)) { 4955 4956 sg--; 4957 sglen = aic_le32toh(sg->len); 4958 /* 4959 * Preserve High Address and SG_LIST 4960 * bits while setting the count to 1. 4961 */ 4962 data_cnt = 1|(sglen&(~AHD_SG_LEN_MASK)); 4963 data_addr = aic_le64toh(sg->addr) 4964 + (sglen & AHD_SG_LEN_MASK) 4965 - 1; 4966 4967 /* 4968 * Increment sg so it points to the 4969 * "next" sg. 4970 */ 4971 sg++; 4972 sgptr = ahd_sg_virt_to_bus(ahd, scb, 4973 sg); 4974 } 4975 } else { 4976 struct ahd_dma_seg *sg; 4977 4978 sg = ahd_sg_bus_to_virt(ahd, scb, sgptr); 4979 4980 /* 4981 * The residual sg ptr points to the next S/G 4982 * to load so we must go back one. 4983 */ 4984 sg--; 4985 sglen = aic_le32toh(sg->len) & AHD_SG_LEN_MASK; 4986 if (sg != scb->sg_list 4987 && sglen < (data_cnt & AHD_SG_LEN_MASK)) { 4988 4989 sg--; 4990 sglen = aic_le32toh(sg->len); 4991 /* 4992 * Preserve High Address and SG_LIST 4993 * bits while setting the count to 1. 4994 */ 4995 data_cnt = 1|(sglen&(~AHD_SG_LEN_MASK)); 4996 data_addr = aic_le32toh(sg->addr) 4997 + (sglen & AHD_SG_LEN_MASK) 4998 - 1; 4999 5000 /* 5001 * Increment sg so it points to the 5002 * "next" sg. 5003 */ 5004 sg++; 5005 sgptr = ahd_sg_virt_to_bus(ahd, scb, 5006 sg); 5007 } 5008 } 5009 /* 5010 * Toggle the "oddness" of the transfer length 5011 * to handle this mid-transfer ignore wide 5012 * residue. This ensures that the oddness is 5013 * correct for subsequent data transfers. 5014 */ 5015 ahd_outb(ahd, SCB_TASK_ATTRIBUTE, 5016 ahd_inb_scbram(ahd, SCB_TASK_ATTRIBUTE) 5017 ^ SCB_XFERLEN_ODD); 5018 5019 ahd_outl(ahd, SCB_RESIDUAL_SGPTR, sgptr); 5020 ahd_outl(ahd, SCB_RESIDUAL_DATACNT, data_cnt); 5021 /* 5022 * The FIFO's pointers will be updated if/when the 5023 * sequencer re-enters a data phase. 5024 */ 5025 } 5026 } 5027} 5028 5029 5030/* 5031 * Reinitialize the data pointers for the active transfer 5032 * based on its current residual. 5033 */ 5034static void 5035ahd_reinitialize_dataptrs(struct ahd_softc *ahd) 5036{ 5037 struct scb *scb; 5038 ahd_mode_state saved_modes; 5039 u_int scb_index; 5040 u_int wait; 5041 uint32_t sgptr; 5042 uint32_t resid; 5043 uint64_t dataptr; 5044 5045 AHD_ASSERT_MODES(ahd, AHD_MODE_DFF0_MSK|AHD_MODE_DFF1_MSK, 5046 AHD_MODE_DFF0_MSK|AHD_MODE_DFF1_MSK); 5047 5048 scb_index = ahd_get_scbptr(ahd); 5049 scb = ahd_lookup_scb(ahd, scb_index); 5050 5051 /* 5052 * Release and reacquire the FIFO so we 5053 * have a clean slate. 5054 */ 5055 ahd_outb(ahd, DFFSXFRCTL, CLRCHN); 5056 wait = 1000; 5057 while (--wait && !(ahd_inb(ahd, MDFFSTAT) & FIFOFREE)) 5058 aic_delay(100); 5059 if (wait == 0) { 5060 ahd_print_path(ahd, scb); 5061 printf("ahd_reinitialize_dataptrs: Forcing FIFO free.\n"); 5062 ahd_outb(ahd, DFFSXFRCTL, RSTCHN|CLRSHCNT); 5063 } 5064 saved_modes = ahd_save_modes(ahd); 5065 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 5066 ahd_outb(ahd, DFFSTAT, 5067 ahd_inb(ahd, DFFSTAT) 5068 | (saved_modes == 0x11 ? CURRFIFO_1 : CURRFIFO_0)); 5069 5070 /* 5071 * Determine initial values for data_addr and data_cnt 5072 * for resuming the data phase. 5073 */ 5074 sgptr = ahd_inl_scbram(ahd, SCB_RESIDUAL_SGPTR); 5075 sgptr &= SG_PTR_MASK; 5076 5077 resid = (ahd_inb_scbram(ahd, SCB_RESIDUAL_DATACNT + 2) << 16) 5078 | (ahd_inb_scbram(ahd, SCB_RESIDUAL_DATACNT + 1) << 8) 5079 | ahd_inb_scbram(ahd, SCB_RESIDUAL_DATACNT); 5080 5081 if ((ahd->flags & AHD_64BIT_ADDRESSING) != 0) { 5082 struct ahd_dma64_seg *sg; 5083 5084 sg = ahd_sg_bus_to_virt(ahd, scb, sgptr); 5085 5086 /* The residual sg_ptr always points to the next sg */ 5087 sg--; 5088 5089 dataptr = aic_le64toh(sg->addr) 5090 + (aic_le32toh(sg->len) & AHD_SG_LEN_MASK) 5091 - resid; 5092 ahd_outl(ahd, HADDR + 4, dataptr >> 32); 5093 } else { 5094 struct ahd_dma_seg *sg; 5095 5096 sg = ahd_sg_bus_to_virt(ahd, scb, sgptr); 5097 5098 /* The residual sg_ptr always points to the next sg */ 5099 sg--; 5100 5101 dataptr = aic_le32toh(sg->addr) 5102 + (aic_le32toh(sg->len) & AHD_SG_LEN_MASK) 5103 - resid; 5104 ahd_outb(ahd, HADDR + 4, 5105 (aic_le32toh(sg->len) & ~AHD_SG_LEN_MASK) >> 24); 5106 } 5107 ahd_outl(ahd, HADDR, dataptr); 5108 ahd_outb(ahd, HCNT + 2, resid >> 16); 5109 ahd_outb(ahd, HCNT + 1, resid >> 8); 5110 ahd_outb(ahd, HCNT, resid); 5111} 5112 5113/* 5114 * Handle the effects of issuing a bus device reset message. 5115 */ 5116static void 5117ahd_handle_devreset(struct ahd_softc *ahd, struct ahd_devinfo *devinfo, 5118 u_int lun, cam_status status, char *message, 5119 int verbose_level) 5120{ 5121#ifdef AHD_TARGET_MODE 5122 struct ahd_tmode_tstate* tstate; 5123#endif 5124 int found; 5125 5126 found = ahd_abort_scbs(ahd, devinfo->target, devinfo->channel, 5127 lun, SCB_LIST_NULL, devinfo->role, 5128 status); 5129 5130#ifdef AHD_TARGET_MODE 5131 /* 5132 * Send an immediate notify ccb to all target mord peripheral 5133 * drivers affected by this action. 5134 */ 5135 tstate = ahd->enabled_targets[devinfo->our_scsiid]; 5136 if (tstate != NULL) { 5137 u_int cur_lun; 5138 u_int max_lun; 5139 5140 if (lun != CAM_LUN_WILDCARD) { 5141 cur_lun = 0; 5142 max_lun = AHD_NUM_LUNS - 1; 5143 } else { 5144 cur_lun = lun; 5145 max_lun = lun; 5146 } 5147 for (cur_lun <= max_lun; cur_lun++) { 5148 struct ahd_tmode_lstate* lstate; 5149 5150 lstate = tstate->enabled_luns[cur_lun]; 5151 if (lstate == NULL) 5152 continue; 5153 5154 ahd_queue_lstate_event(ahd, lstate, devinfo->our_scsiid, 5155 MSG_BUS_DEV_RESET, /*arg*/0); 5156 ahd_send_lstate_events(ahd, lstate); 5157 } 5158 } 5159#endif 5160 5161 /* 5162 * Go back to async/narrow transfers and renegotiate. 5163 */ 5164 ahd_set_width(ahd, devinfo, MSG_EXT_WDTR_BUS_8_BIT, 5165 AHD_TRANS_CUR, /*paused*/TRUE); 5166 ahd_set_syncrate(ahd, devinfo, /*period*/0, /*offset*/0, 5167 /*ppr_options*/0, AHD_TRANS_CUR, 5168 /*paused*/TRUE); 5169 5170 if (status != CAM_SEL_TIMEOUT) 5171 ahd_send_async(ahd, devinfo->channel, devinfo->target, 5172 lun, AC_SENT_BDR, NULL); 5173 5174 if (message != NULL 5175 && (verbose_level <= bootverbose)) { 5176 AHD_CORRECTABLE_ERROR(ahd); 5177 printf("%s: %s on %c:%d. %d SCBs aborted\n", ahd_name(ahd), 5178 message, devinfo->channel, devinfo->target, found); 5179 } 5180} 5181 5182#ifdef AHD_TARGET_MODE 5183static void 5184ahd_setup_target_msgin(struct ahd_softc *ahd, struct ahd_devinfo *devinfo, 5185 struct scb *scb) 5186{ 5187 5188 /* 5189 * To facilitate adding multiple messages together, 5190 * each routine should increment the index and len 5191 * variables instead of setting them explicitly. 5192 */ 5193 ahd->msgout_index = 0; 5194 ahd->msgout_len = 0; 5195 5196 if (scb != NULL && (scb->flags & SCB_AUTO_NEGOTIATE) != 0) 5197 ahd_build_transfer_msg(ahd, devinfo); 5198 else 5199 panic("ahd_intr: AWAITING target message with no message"); 5200 5201 ahd->msgout_index = 0; 5202 ahd->msg_type = MSG_TYPE_TARGET_MSGIN; 5203} 5204#endif 5205/**************************** Initialization **********************************/ 5206static u_int 5207ahd_sglist_size(struct ahd_softc *ahd) 5208{ 5209 bus_size_t list_size; 5210 5211 list_size = sizeof(struct ahd_dma_seg) * AHD_NSEG; 5212 if ((ahd->flags & AHD_64BIT_ADDRESSING) != 0) 5213 list_size = sizeof(struct ahd_dma64_seg) * AHD_NSEG; 5214 return (list_size); 5215} 5216 5217/* 5218 * Calculate the optimum S/G List allocation size. S/G elements used 5219 * for a given transaction must be physically contiguous. Assume the 5220 * OS will allocate full pages to us, so it doesn't make sense to request 5221 * less than a page. 5222 */ 5223static u_int 5224ahd_sglist_allocsize(struct ahd_softc *ahd) 5225{ 5226 bus_size_t sg_list_increment; 5227 bus_size_t sg_list_size; 5228 bus_size_t max_list_size; 5229 bus_size_t best_list_size; 5230 5231 /* Start out with the minimum required for AHD_NSEG. */ 5232 sg_list_increment = ahd_sglist_size(ahd); 5233 sg_list_size = sg_list_increment; 5234 5235 /* Get us as close as possible to a page in size. */ 5236 while ((sg_list_size + sg_list_increment) <= PAGE_SIZE) 5237 sg_list_size += sg_list_increment; 5238 5239 /* 5240 * Try to reduce the amount of wastage by allocating 5241 * multiple pages. 5242 */ 5243 best_list_size = sg_list_size; 5244 max_list_size = roundup(sg_list_increment, PAGE_SIZE); 5245 if (max_list_size < 4 * PAGE_SIZE) 5246 max_list_size = 4 * PAGE_SIZE; 5247 if (max_list_size > (AHD_SCB_MAX_ALLOC * sg_list_increment)) 5248 max_list_size = (AHD_SCB_MAX_ALLOC * sg_list_increment); 5249 while ((sg_list_size + sg_list_increment) <= max_list_size 5250 && (sg_list_size % PAGE_SIZE) != 0) { 5251 bus_size_t new_mod; 5252 bus_size_t best_mod; 5253 5254 sg_list_size += sg_list_increment; 5255 new_mod = sg_list_size % PAGE_SIZE; 5256 best_mod = best_list_size % PAGE_SIZE; 5257 if (new_mod > best_mod || new_mod == 0) { 5258 best_list_size = sg_list_size; 5259 } 5260 } 5261 return (best_list_size); 5262} 5263 5264/* 5265 * Allocate a controller structure for a new device 5266 * and perform initial initializion. 5267 */ 5268struct ahd_softc * 5269ahd_alloc(void *platform_arg, char *name) 5270{ 5271 struct ahd_softc *ahd; 5272 5273#ifndef __FreeBSD__ 5274 ahd = malloc(sizeof(*ahd), M_DEVBUF, M_NOWAIT); 5275 if (!ahd) { 5276 printf("aic7xxx: cannot malloc softc!\n"); 5277 free(name, M_DEVBUF); 5278 return NULL; 5279 } 5280#else 5281 ahd = device_get_softc((device_t)platform_arg); 5282#endif 5283 memset(ahd, 0, sizeof(*ahd)); 5284 ahd->seep_config = malloc(sizeof(*ahd->seep_config), 5285 M_DEVBUF, M_NOWAIT); 5286 if (ahd->seep_config == NULL) { 5287#ifndef __FreeBSD__ 5288 free(ahd, M_DEVBUF); 5289#endif 5290 free(name, M_DEVBUF); 5291 return (NULL); 5292 } 5293 LIST_INIT(&ahd->pending_scbs); 5294 LIST_INIT(&ahd->timedout_scbs); 5295 /* We don't know our unit number until the OSM sets it */ 5296 ahd->name = name; 5297 ahd->unit = -1; 5298 ahd->description = NULL; 5299 ahd->bus_description = NULL; 5300 ahd->channel = 'A'; 5301 ahd->chip = AHD_NONE; 5302 ahd->features = AHD_FENONE; 5303 ahd->bugs = AHD_BUGNONE; 5304 ahd->flags = AHD_SPCHK_ENB_A|AHD_RESET_BUS_A|AHD_TERM_ENB_A 5305 | AHD_EXTENDED_TRANS_A|AHD_STPWLEVEL_A; 5306 aic_timer_init(&ahd->reset_timer); 5307 aic_timer_init(&ahd->stat_timer); 5308 ahd->int_coalescing_timer = AHD_INT_COALESCING_TIMER_DEFAULT; 5309 ahd->int_coalescing_maxcmds = AHD_INT_COALESCING_MAXCMDS_DEFAULT; 5310 ahd->int_coalescing_mincmds = AHD_INT_COALESCING_MINCMDS_DEFAULT; 5311 ahd->int_coalescing_threshold = AHD_INT_COALESCING_THRESHOLD_DEFAULT; 5312 ahd->int_coalescing_stop_threshold = 5313 AHD_INT_COALESCING_STOP_THRESHOLD_DEFAULT; 5314 5315 if (ahd_platform_alloc(ahd, platform_arg) != 0) { 5316 ahd_free(ahd); 5317 ahd = NULL; 5318 } 5319 ahd_lockinit(ahd); 5320#ifdef AHD_DEBUG 5321 if ((ahd_debug & AHD_SHOW_MEMORY) != 0) { 5322 printf("%s: scb size = 0x%x, hscb size = 0x%x\n", 5323 ahd_name(ahd), (u_int)sizeof(struct scb), 5324 (u_int)sizeof(struct hardware_scb)); 5325 } 5326#endif 5327 return (ahd); 5328} 5329 5330int 5331ahd_softc_init(struct ahd_softc *ahd) 5332{ 5333 5334 ahd->unpause = 0; 5335 ahd->pause = PAUSE; 5336 return (0); 5337} 5338 5339void 5340ahd_softc_insert(struct ahd_softc *ahd) 5341{ 5342 struct ahd_softc *list_ahd; 5343 5344#if AIC_PCI_CONFIG > 0 5345 /* 5346 * Second Function PCI devices need to inherit some 5347 * settings from function 0. 5348 */ 5349 if ((ahd->features & AHD_MULTI_FUNC) != 0) { 5350 TAILQ_FOREACH(list_ahd, &ahd_tailq, links) { 5351 aic_dev_softc_t list_pci; 5352 aic_dev_softc_t pci; 5353 5354 list_pci = list_ahd->dev_softc; 5355 pci = ahd->dev_softc; 5356 if (aic_get_pci_slot(list_pci) == aic_get_pci_slot(pci) 5357 && aic_get_pci_bus(list_pci) == aic_get_pci_bus(pci)) { 5358 struct ahd_softc *master; 5359 struct ahd_softc *slave; 5360 5361 if (aic_get_pci_function(list_pci) == 0) { 5362 master = list_ahd; 5363 slave = ahd; 5364 } else { 5365 master = ahd; 5366 slave = list_ahd; 5367 } 5368 slave->flags &= ~AHD_BIOS_ENABLED; 5369 slave->flags |= 5370 master->flags & AHD_BIOS_ENABLED; 5371 break; 5372 } 5373 } 5374 } 5375#endif 5376 5377 /* 5378 * Insertion sort into our list of softcs. 5379 */ 5380 list_ahd = TAILQ_FIRST(&ahd_tailq); 5381 while (list_ahd != NULL 5382 && ahd_softc_comp(ahd, list_ahd) <= 0) 5383 list_ahd = TAILQ_NEXT(list_ahd, links); 5384 if (list_ahd != NULL) 5385 TAILQ_INSERT_BEFORE(list_ahd, ahd, links); 5386 else 5387 TAILQ_INSERT_TAIL(&ahd_tailq, ahd, links); 5388 ahd->init_level++; 5389} 5390 5391void 5392ahd_set_unit(struct ahd_softc *ahd, int unit) 5393{ 5394 ahd->unit = unit; 5395} 5396 5397void 5398ahd_set_name(struct ahd_softc *ahd, char *name) 5399{ 5400 if (ahd->name != NULL) 5401 free(ahd->name, M_DEVBUF); 5402 ahd->name = name; 5403} 5404 5405void 5406ahd_free(struct ahd_softc *ahd) 5407{ 5408 int i; 5409 5410 ahd_terminate_recovery_thread(ahd); 5411 switch (ahd->init_level) { 5412 default: 5413 case 5: 5414 ahd_shutdown(ahd); 5415 /* FALLTHROUGH */ 5416 case 4: 5417 aic_dmamap_unload(ahd, ahd->shared_data_dmat, 5418 ahd->shared_data_map.dmamap); 5419 /* FALLTHROUGH */ 5420 case 3: 5421 aic_dmamem_free(ahd, ahd->shared_data_dmat, ahd->qoutfifo, 5422 ahd->shared_data_map.dmamap); 5423 aic_dmamap_destroy(ahd, ahd->shared_data_dmat, 5424 ahd->shared_data_map.dmamap); 5425 /* FALLTHROUGH */ 5426 case 2: 5427 aic_dma_tag_destroy(ahd, ahd->shared_data_dmat); 5428 case 1: 5429#ifndef __linux__ 5430 aic_dma_tag_destroy(ahd, ahd->buffer_dmat); 5431#endif 5432 break; 5433 case 0: 5434 break; 5435 } 5436 5437#ifndef __linux__ 5438 aic_dma_tag_destroy(ahd, ahd->parent_dmat); 5439#endif 5440 ahd_platform_free(ahd); 5441 ahd_fini_scbdata(ahd); 5442 for (i = 0; i < AHD_NUM_TARGETS; i++) { 5443 struct ahd_tmode_tstate *tstate; 5444 5445 tstate = ahd->enabled_targets[i]; 5446 if (tstate != NULL) { 5447#ifdef AHD_TARGET_MODE 5448 int j; 5449 5450 for (j = 0; j < AHD_NUM_LUNS; j++) { 5451 struct ahd_tmode_lstate *lstate; 5452 5453 lstate = tstate->enabled_luns[j]; 5454 if (lstate != NULL) { 5455 xpt_free_path(lstate->path); 5456 free(lstate, M_DEVBUF); 5457 } 5458 } 5459#endif 5460 free(tstate, M_DEVBUF); 5461 } 5462 } 5463#ifdef AHD_TARGET_MODE 5464 if (ahd->black_hole != NULL) { 5465 xpt_free_path(ahd->black_hole->path); 5466 free(ahd->black_hole, M_DEVBUF); 5467 } 5468#endif 5469 if (ahd->name != NULL) 5470 free(ahd->name, M_DEVBUF); 5471 if (ahd->seep_config != NULL) 5472 free(ahd->seep_config, M_DEVBUF); 5473 if (ahd->saved_stack != NULL) 5474 free(ahd->saved_stack, M_DEVBUF); 5475#ifndef __FreeBSD__ 5476 free(ahd, M_DEVBUF); 5477#endif 5478 return; 5479} 5480 5481void 5482ahd_shutdown(void *arg) 5483{ 5484 struct ahd_softc *ahd; 5485 5486 ahd = (struct ahd_softc *)arg; 5487 5488 /* 5489 * Stop periodic timer callbacks. 5490 */ 5491 aic_timer_stop(&ahd->reset_timer); 5492 aic_timer_stop(&ahd->stat_timer); 5493 5494 /* This will reset most registers to 0, but not all */ 5495 ahd_reset(ahd, /*reinit*/FALSE); 5496} 5497 5498/* 5499 * Reset the controller and record some information about it 5500 * that is only available just after a reset. If "reinit" is 5501 * non-zero, this reset occured after initial configuration 5502 * and the caller requests that the chip be fully reinitialized 5503 * to a runable state. Chip interrupts are *not* enabled after 5504 * a reinitialization. The caller must enable interrupts via 5505 * ahd_intr_enable(). 5506 */ 5507int 5508ahd_reset(struct ahd_softc *ahd, int reinit) 5509{ 5510 u_int sxfrctl1; 5511 int wait; 5512 uint32_t cmd; 5513 5514 /* 5515 * Preserve the value of the SXFRCTL1 register for all channels. 5516 * It contains settings that affect termination and we don't want 5517 * to disturb the integrity of the bus. 5518 */ 5519 ahd_pause(ahd); 5520 ahd_update_modes(ahd); 5521 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 5522 sxfrctl1 = ahd_inb(ahd, SXFRCTL1); 5523 5524 cmd = aic_pci_read_config(ahd->dev_softc, PCIR_COMMAND, /*bytes*/2); 5525 if ((ahd->bugs & AHD_PCIX_CHIPRST_BUG) != 0) { 5526 uint32_t mod_cmd; 5527 5528 /* 5529 * A4 Razor #632 5530 * During the assertion of CHIPRST, the chip 5531 * does not disable its parity logic prior to 5532 * the start of the reset. This may cause a 5533 * parity error to be detected and thus a 5534 * spurious SERR or PERR assertion. Disble 5535 * PERR and SERR responses during the CHIPRST. 5536 */ 5537 mod_cmd = cmd & ~(PCIM_CMD_PERRESPEN|PCIM_CMD_SERRESPEN); 5538 aic_pci_write_config(ahd->dev_softc, PCIR_COMMAND, 5539 mod_cmd, /*bytes*/2); 5540 } 5541 ahd_outb(ahd, HCNTRL, CHIPRST | ahd->pause); 5542 5543 /* 5544 * Ensure that the reset has finished. We delay 1000us 5545 * prior to reading the register to make sure the chip 5546 * has sufficiently completed its reset to handle register 5547 * accesses. 5548 */ 5549 wait = 1000; 5550 do { 5551 aic_delay(1000); 5552 } while (--wait && !(ahd_inb(ahd, HCNTRL) & CHIPRSTACK)); 5553 5554 if (wait == 0) { 5555 printf("%s: WARNING - Failed chip reset! " 5556 "Trying to initialize anyway.\n", ahd_name(ahd)); 5557 AHD_FATAL_ERROR(ahd); 5558 } 5559 ahd_outb(ahd, HCNTRL, ahd->pause); 5560 5561 if ((ahd->bugs & AHD_PCIX_CHIPRST_BUG) != 0) { 5562 /* 5563 * Clear any latched PCI error status and restore 5564 * previous SERR and PERR response enables. 5565 */ 5566 aic_pci_write_config(ahd->dev_softc, PCIR_STATUS + 1, 5567 0xFF, /*bytes*/1); 5568 aic_pci_write_config(ahd->dev_softc, PCIR_COMMAND, 5569 cmd, /*bytes*/2); 5570 } 5571 5572 /* 5573 * Mode should be SCSI after a chip reset, but lets 5574 * set it just to be safe. We touch the MODE_PTR 5575 * register directly so as to bypass the lazy update 5576 * code in ahd_set_modes(). 5577 */ 5578 ahd_known_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 5579 ahd_outb(ahd, MODE_PTR, 5580 ahd_build_mode_state(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI)); 5581 5582 /* 5583 * Restore SXFRCTL1. 5584 * 5585 * We must always initialize STPWEN to 1 before we 5586 * restore the saved values. STPWEN is initialized 5587 * to a tri-state condition which can only be cleared 5588 * by turning it on. 5589 */ 5590 ahd_outb(ahd, SXFRCTL1, sxfrctl1|STPWEN); 5591 ahd_outb(ahd, SXFRCTL1, sxfrctl1); 5592 5593 /* Determine chip configuration */ 5594 ahd->features &= ~AHD_WIDE; 5595 if ((ahd_inb(ahd, SBLKCTL) & SELWIDE) != 0) 5596 ahd->features |= AHD_WIDE; 5597 5598 /* 5599 * If a recovery action has forced a chip reset, 5600 * re-initialize the chip to our liking. 5601 */ 5602 if (reinit != 0) 5603 ahd_chip_init(ahd); 5604 5605 return (0); 5606} 5607 5608/* 5609 * Determine the number of SCBs available on the controller 5610 */ 5611int 5612ahd_probe_scbs(struct ahd_softc *ahd) { 5613 int i; 5614 5615 AHD_ASSERT_MODES(ahd, ~(AHD_MODE_UNKNOWN_MSK|AHD_MODE_CFG_MSK), 5616 ~(AHD_MODE_UNKNOWN_MSK|AHD_MODE_CFG_MSK)); 5617 for (i = 0; i < AHD_SCB_MAX; i++) { 5618 int j; 5619 5620 ahd_set_scbptr(ahd, i); 5621 ahd_outw(ahd, SCB_BASE, i); 5622 for (j = 2; j < 64; j++) 5623 ahd_outb(ahd, SCB_BASE+j, 0); 5624 /* Start out life as unallocated (needing an abort) */ 5625 ahd_outb(ahd, SCB_CONTROL, MK_MESSAGE); 5626 if (ahd_inw_scbram(ahd, SCB_BASE) != i) 5627 break; 5628 ahd_set_scbptr(ahd, 0); 5629 if (ahd_inw_scbram(ahd, SCB_BASE) != 0) 5630 break; 5631 } 5632 return (i); 5633} 5634 5635static void 5636ahd_dmamap_cb(void *arg, bus_dma_segment_t *segs, int nseg, int error) 5637{ 5638 bus_addr_t *baddr; 5639 5640 baddr = (bus_addr_t *)arg; 5641 *baddr = segs->ds_addr; 5642} 5643 5644static void 5645ahd_initialize_hscbs(struct ahd_softc *ahd) 5646{ 5647 int i; 5648 5649 for (i = 0; i < ahd->scb_data.maxhscbs; i++) { 5650 ahd_set_scbptr(ahd, i); 5651 5652 /* Clear the control byte. */ 5653 ahd_outb(ahd, SCB_CONTROL, 0); 5654 5655 /* Set the next pointer */ 5656 ahd_outw(ahd, SCB_NEXT, SCB_LIST_NULL); 5657 } 5658} 5659 5660static int 5661ahd_init_scbdata(struct ahd_softc *ahd) 5662{ 5663 struct scb_data *scb_data; 5664 int i; 5665 5666 scb_data = &ahd->scb_data; 5667 TAILQ_INIT(&scb_data->free_scbs); 5668 for (i = 0; i < AHD_NUM_TARGETS * AHD_NUM_LUNS_NONPKT; i++) 5669 LIST_INIT(&scb_data->free_scb_lists[i]); 5670 LIST_INIT(&scb_data->any_dev_free_scb_list); 5671 SLIST_INIT(&scb_data->hscb_maps); 5672 SLIST_INIT(&scb_data->sg_maps); 5673 SLIST_INIT(&scb_data->sense_maps); 5674 5675 /* Determine the number of hardware SCBs and initialize them */ 5676 scb_data->maxhscbs = ahd_probe_scbs(ahd); 5677 if (scb_data->maxhscbs == 0) { 5678 printf("%s: No SCB space found\n", ahd_name(ahd)); 5679 AHD_FATAL_ERROR(ahd); 5680 return (ENXIO); 5681 } 5682 5683 ahd_initialize_hscbs(ahd); 5684 5685 /* 5686 * Create our DMA tags. These tags define the kinds of device 5687 * accessible memory allocations and memory mappings we will 5688 * need to perform during normal operation. 5689 * 5690 * Unless we need to further restrict the allocation, we rely 5691 * on the restrictions of the parent dmat, hence the common 5692 * use of MAXADDR and MAXSIZE. 5693 */ 5694 5695 /* DMA tag for our hardware scb structures */ 5696 if (aic_dma_tag_create(ahd, ahd->parent_dmat, /*alignment*/1, 5697 /*boundary*/BUS_SPACE_MAXADDR_32BIT + 1, 5698 /*lowaddr*/BUS_SPACE_MAXADDR_32BIT, 5699 /*highaddr*/BUS_SPACE_MAXADDR, 5700 /*filter*/NULL, /*filterarg*/NULL, 5701 PAGE_SIZE, /*nsegments*/1, 5702 /*maxsegsz*/BUS_SPACE_MAXSIZE_32BIT, 5703 /*flags*/0, &scb_data->hscb_dmat) != 0) { 5704 goto error_exit; 5705 } 5706 5707 scb_data->init_level++; 5708 5709 /* DMA tag for our S/G structures. */ 5710 if (aic_dma_tag_create(ahd, ahd->parent_dmat, /*alignment*/8, 5711 /*boundary*/BUS_SPACE_MAXADDR_32BIT + 1, 5712 /*lowaddr*/BUS_SPACE_MAXADDR_32BIT, 5713 /*highaddr*/BUS_SPACE_MAXADDR, 5714 /*filter*/NULL, /*filterarg*/NULL, 5715 ahd_sglist_allocsize(ahd), /*nsegments*/1, 5716 /*maxsegsz*/BUS_SPACE_MAXSIZE_32BIT, 5717 /*flags*/0, &scb_data->sg_dmat) != 0) { 5718 goto error_exit; 5719 } 5720#ifdef AHD_DEBUG 5721 if ((ahd_debug & AHD_SHOW_MEMORY) != 0) 5722 printf("%s: ahd_sglist_allocsize = 0x%x\n", ahd_name(ahd), 5723 ahd_sglist_allocsize(ahd)); 5724#endif 5725 5726 scb_data->init_level++; 5727 5728 /* DMA tag for our sense buffers. We allocate in page sized chunks */ 5729 if (aic_dma_tag_create(ahd, ahd->parent_dmat, /*alignment*/1, 5730 /*boundary*/BUS_SPACE_MAXADDR_32BIT + 1, 5731 /*lowaddr*/BUS_SPACE_MAXADDR_32BIT, 5732 /*highaddr*/BUS_SPACE_MAXADDR, 5733 /*filter*/NULL, /*filterarg*/NULL, 5734 PAGE_SIZE, /*nsegments*/1, 5735 /*maxsegsz*/BUS_SPACE_MAXSIZE_32BIT, 5736 /*flags*/0, &scb_data->sense_dmat) != 0) { 5737 goto error_exit; 5738 } 5739 5740 scb_data->init_level++; 5741 5742 /* Perform initial CCB allocation */ 5743 while (ahd_alloc_scbs(ahd) != 0) 5744 ; 5745 5746 if (scb_data->numscbs == 0) { 5747 printf("%s: ahd_init_scbdata - " 5748 "Unable to allocate initial scbs\n", 5749 ahd_name(ahd)); 5750 goto error_exit; 5751 } 5752 5753 /* 5754 * Note that we were successfull 5755 */ 5756 return (0); 5757 5758error_exit: 5759 5760 return (ENOMEM); 5761} 5762 5763static struct scb * 5764ahd_find_scb_by_tag(struct ahd_softc *ahd, u_int tag) 5765{ 5766 struct scb *scb; 5767 5768 /* 5769 * Look on the pending list. 5770 */ 5771 LIST_FOREACH(scb, &ahd->pending_scbs, pending_links) { 5772 if (SCB_GET_TAG(scb) == tag) 5773 return (scb); 5774 } 5775 5776 /* 5777 * Then on all of the collision free lists. 5778 */ 5779 TAILQ_FOREACH(scb, &ahd->scb_data.free_scbs, links.tqe) { 5780 struct scb *list_scb; 5781 5782 list_scb = scb; 5783 do { 5784 if (SCB_GET_TAG(list_scb) == tag) 5785 return (list_scb); 5786 list_scb = LIST_NEXT(list_scb, collision_links); 5787 } while (list_scb); 5788 } 5789 5790 /* 5791 * And finally on the generic free list. 5792 */ 5793 LIST_FOREACH(scb, &ahd->scb_data.any_dev_free_scb_list, links.le) { 5794 if (SCB_GET_TAG(scb) == tag) 5795 return (scb); 5796 } 5797 5798 return (NULL); 5799} 5800 5801static void 5802ahd_fini_scbdata(struct ahd_softc *ahd) 5803{ 5804 struct scb_data *scb_data; 5805 5806 scb_data = &ahd->scb_data; 5807 if (scb_data == NULL) 5808 return; 5809 5810 switch (scb_data->init_level) { 5811 default: 5812 case 7: 5813 { 5814 struct map_node *sns_map; 5815 5816 while ((sns_map = SLIST_FIRST(&scb_data->sense_maps)) != NULL) { 5817 SLIST_REMOVE_HEAD(&scb_data->sense_maps, links); 5818 aic_dmamap_unload(ahd, scb_data->sense_dmat, 5819 sns_map->dmamap); 5820 aic_dmamem_free(ahd, scb_data->sense_dmat, 5821 sns_map->vaddr, sns_map->dmamap); 5822 free(sns_map, M_DEVBUF); 5823 } 5824 aic_dma_tag_destroy(ahd, scb_data->sense_dmat); 5825 /* FALLTHROUGH */ 5826 } 5827 case 6: 5828 { 5829 struct map_node *sg_map; 5830 5831 while ((sg_map = SLIST_FIRST(&scb_data->sg_maps)) != NULL) { 5832 SLIST_REMOVE_HEAD(&scb_data->sg_maps, links); 5833 aic_dmamap_unload(ahd, scb_data->sg_dmat, 5834 sg_map->dmamap); 5835 aic_dmamem_free(ahd, scb_data->sg_dmat, 5836 sg_map->vaddr, sg_map->dmamap); 5837 free(sg_map, M_DEVBUF); 5838 } 5839 aic_dma_tag_destroy(ahd, scb_data->sg_dmat); 5840 /* FALLTHROUGH */ 5841 } 5842 case 5: 5843 { 5844 struct map_node *hscb_map; 5845 5846 while ((hscb_map = SLIST_FIRST(&scb_data->hscb_maps)) != NULL) { 5847 SLIST_REMOVE_HEAD(&scb_data->hscb_maps, links); 5848 aic_dmamap_unload(ahd, scb_data->hscb_dmat, 5849 hscb_map->dmamap); 5850 aic_dmamem_free(ahd, scb_data->hscb_dmat, 5851 hscb_map->vaddr, hscb_map->dmamap); 5852 free(hscb_map, M_DEVBUF); 5853 } 5854 aic_dma_tag_destroy(ahd, scb_data->hscb_dmat); 5855 /* FALLTHROUGH */ 5856 } 5857 case 4: 5858 case 3: 5859 case 2: 5860 case 1: 5861 case 0: 5862 break; 5863 } 5864} 5865 5866/* 5867 * DSP filter Bypass must be enabled until the first selection 5868 * after a change in bus mode (Razor #491 and #493). 5869 */ 5870static void 5871ahd_setup_iocell_workaround(struct ahd_softc *ahd) 5872{ 5873 ahd_mode_state saved_modes; 5874 5875 saved_modes = ahd_save_modes(ahd); 5876 ahd_set_modes(ahd, AHD_MODE_CFG, AHD_MODE_CFG); 5877 ahd_outb(ahd, DSPDATACTL, ahd_inb(ahd, DSPDATACTL) 5878 | BYPASSENAB | RCVROFFSTDIS | XMITOFFSTDIS); 5879 ahd_outb(ahd, SIMODE0, ahd_inb(ahd, SIMODE0) | (ENSELDO|ENSELDI)); 5880#ifdef AHD_DEBUG 5881 if ((ahd_debug & AHD_SHOW_MISC) != 0) 5882 printf("%s: Setting up iocell workaround\n", ahd_name(ahd)); 5883#endif 5884 ahd_restore_modes(ahd, saved_modes); 5885 ahd->flags &= ~AHD_HAD_FIRST_SEL; 5886} 5887 5888static void 5889ahd_iocell_first_selection(struct ahd_softc *ahd) 5890{ 5891 ahd_mode_state saved_modes; 5892 u_int sblkctl; 5893 5894 if ((ahd->flags & AHD_HAD_FIRST_SEL) != 0) 5895 return; 5896 saved_modes = ahd_save_modes(ahd); 5897 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 5898 sblkctl = ahd_inb(ahd, SBLKCTL); 5899 ahd_set_modes(ahd, AHD_MODE_CFG, AHD_MODE_CFG); 5900#ifdef AHD_DEBUG 5901 if ((ahd_debug & AHD_SHOW_MISC) != 0) 5902 printf("%s: iocell first selection\n", ahd_name(ahd)); 5903#endif 5904 if ((sblkctl & ENAB40) != 0) { 5905 ahd_outb(ahd, DSPDATACTL, 5906 ahd_inb(ahd, DSPDATACTL) & ~BYPASSENAB); 5907#ifdef AHD_DEBUG 5908 if ((ahd_debug & AHD_SHOW_MISC) != 0) 5909 printf("%s: BYPASS now disabled\n", ahd_name(ahd)); 5910#endif 5911 } 5912 ahd_outb(ahd, SIMODE0, ahd_inb(ahd, SIMODE0) & ~(ENSELDO|ENSELDI)); 5913 ahd_outb(ahd, CLRINT, CLRSCSIINT); 5914 ahd_restore_modes(ahd, saved_modes); 5915 ahd->flags |= AHD_HAD_FIRST_SEL; 5916} 5917 5918/*************************** SCB Management ***********************************/ 5919static void 5920ahd_add_col_list(struct ahd_softc *ahd, struct scb *scb, u_int col_idx) 5921{ 5922 struct scb_list *free_list; 5923 struct scb_tailq *free_tailq; 5924 struct scb *first_scb; 5925 5926 scb->flags |= SCB_ON_COL_LIST; 5927 AHD_SET_SCB_COL_IDX(scb, col_idx); 5928 free_list = &ahd->scb_data.free_scb_lists[col_idx]; 5929 free_tailq = &ahd->scb_data.free_scbs; 5930 first_scb = LIST_FIRST(free_list); 5931 if (first_scb != NULL) { 5932 LIST_INSERT_AFTER(first_scb, scb, collision_links); 5933 } else { 5934 LIST_INSERT_HEAD(free_list, scb, collision_links); 5935 TAILQ_INSERT_TAIL(free_tailq, scb, links.tqe); 5936 } 5937} 5938 5939static void 5940ahd_rem_col_list(struct ahd_softc *ahd, struct scb *scb) 5941{ 5942 struct scb_list *free_list; 5943 struct scb_tailq *free_tailq; 5944 struct scb *first_scb; 5945 u_int col_idx; 5946 5947 scb->flags &= ~SCB_ON_COL_LIST; 5948 col_idx = AHD_GET_SCB_COL_IDX(ahd, scb); 5949 free_list = &ahd->scb_data.free_scb_lists[col_idx]; 5950 free_tailq = &ahd->scb_data.free_scbs; 5951 first_scb = LIST_FIRST(free_list); 5952 if (first_scb == scb) { 5953 struct scb *next_scb; 5954 5955 /* 5956 * Maintain order in the collision free 5957 * lists for fairness if this device has 5958 * other colliding tags active. 5959 */ 5960 next_scb = LIST_NEXT(scb, collision_links); 5961 if (next_scb != NULL) { 5962 TAILQ_INSERT_AFTER(free_tailq, scb, 5963 next_scb, links.tqe); 5964 } 5965 TAILQ_REMOVE(free_tailq, scb, links.tqe); 5966 } 5967 LIST_REMOVE(scb, collision_links); 5968} 5969 5970/* 5971 * Get a free scb. If there are none, see if we can allocate a new SCB. 5972 */ 5973struct scb * 5974ahd_get_scb(struct ahd_softc *ahd, u_int col_idx) 5975{ 5976 struct scb *scb; 5977 int tries; 5978 5979 tries = 0; 5980look_again: 5981 TAILQ_FOREACH(scb, &ahd->scb_data.free_scbs, links.tqe) { 5982 if (AHD_GET_SCB_COL_IDX(ahd, scb) != col_idx) { 5983 ahd_rem_col_list(ahd, scb); 5984 goto found; 5985 } 5986 } 5987 if ((scb = LIST_FIRST(&ahd->scb_data.any_dev_free_scb_list)) == NULL) { 5988 5989 if (tries++ != 0) 5990 return (NULL); 5991 if (ahd_alloc_scbs(ahd) == 0) 5992 return (NULL); 5993 goto look_again; 5994 } 5995 LIST_REMOVE(scb, links.le); 5996 if (col_idx != AHD_NEVER_COL_IDX 5997 && (scb->col_scb != NULL) 5998 && (scb->col_scb->flags & SCB_ACTIVE) == 0) { 5999 LIST_REMOVE(scb->col_scb, links.le); 6000 ahd_add_col_list(ahd, scb->col_scb, col_idx); 6001 } 6002found: 6003 scb->flags |= SCB_ACTIVE; 6004 return (scb); 6005} 6006 6007/* 6008 * Return an SCB resource to the free list. 6009 */ 6010void 6011ahd_free_scb(struct ahd_softc *ahd, struct scb *scb) 6012{ 6013 6014 /* Clean up for the next user */ 6015 scb->flags = SCB_FLAG_NONE; 6016 scb->hscb->control = 0; 6017 ahd->scb_data.scbindex[SCB_GET_TAG(scb)] = NULL; 6018 6019 if (scb->col_scb == NULL) { 6020 6021 /* 6022 * No collision possible. Just free normally. 6023 */ 6024 LIST_INSERT_HEAD(&ahd->scb_data.any_dev_free_scb_list, 6025 scb, links.le); 6026 } else if ((scb->col_scb->flags & SCB_ON_COL_LIST) != 0) { 6027 6028 /* 6029 * The SCB we might have collided with is on 6030 * a free collision list. Put both SCBs on 6031 * the generic list. 6032 */ 6033 ahd_rem_col_list(ahd, scb->col_scb); 6034 LIST_INSERT_HEAD(&ahd->scb_data.any_dev_free_scb_list, 6035 scb, links.le); 6036 LIST_INSERT_HEAD(&ahd->scb_data.any_dev_free_scb_list, 6037 scb->col_scb, links.le); 6038 } else if ((scb->col_scb->flags 6039 & (SCB_PACKETIZED|SCB_ACTIVE)) == SCB_ACTIVE 6040 && (scb->col_scb->hscb->control & TAG_ENB) != 0) { 6041 6042 /* 6043 * The SCB we might collide with on the next allocation 6044 * is still active in a non-packetized, tagged, context. 6045 * Put us on the SCB collision list. 6046 */ 6047 ahd_add_col_list(ahd, scb, 6048 AHD_GET_SCB_COL_IDX(ahd, scb->col_scb)); 6049 } else { 6050 /* 6051 * The SCB we might collide with on the next allocation 6052 * is either active in a packetized context, or free. 6053 * Since we can't collide, put this SCB on the generic 6054 * free list. 6055 */ 6056 LIST_INSERT_HEAD(&ahd->scb_data.any_dev_free_scb_list, 6057 scb, links.le); 6058 } 6059 6060 aic_platform_scb_free(ahd, scb); 6061} 6062 6063int 6064ahd_alloc_scbs(struct ahd_softc *ahd) 6065{ 6066 struct scb_data *scb_data; 6067 struct scb *next_scb; 6068 struct hardware_scb *hscb; 6069 struct map_node *hscb_map; 6070 struct map_node *sg_map; 6071 struct map_node *sense_map; 6072 uint8_t *segs; 6073 uint8_t *sense_data; 6074 bus_addr_t hscb_busaddr; 6075 bus_addr_t sg_busaddr; 6076 bus_addr_t sense_busaddr; 6077 int newcount; 6078 int i; 6079 6080 scb_data = &ahd->scb_data; 6081 if (scb_data->numscbs >= AHD_SCB_MAX_ALLOC) 6082 /* Can't allocate any more */ 6083 return (0); 6084 6085 if (scb_data->scbs_left != 0) { 6086 int offset; 6087 6088 offset = (PAGE_SIZE / sizeof(*hscb)) - scb_data->scbs_left; 6089 hscb_map = SLIST_FIRST(&scb_data->hscb_maps); 6090 hscb = &((struct hardware_scb *)hscb_map->vaddr)[offset]; 6091 hscb_busaddr = hscb_map->busaddr + (offset * sizeof(*hscb)); 6092 } else { 6093 hscb_map = malloc(sizeof(*hscb_map), M_DEVBUF, M_NOWAIT); 6094 6095 if (hscb_map == NULL) 6096 return (0); 6097 6098 /* Allocate the next batch of hardware SCBs */ 6099 if (aic_dmamem_alloc(ahd, scb_data->hscb_dmat, 6100 (void **)&hscb_map->vaddr, 6101 BUS_DMA_NOWAIT | BUS_DMA_COHERENT, 6102 &hscb_map->dmamap) != 0) { 6103 free(hscb_map, M_DEVBUF); 6104 return (0); 6105 } 6106 6107 SLIST_INSERT_HEAD(&scb_data->hscb_maps, hscb_map, links); 6108 6109 aic_dmamap_load(ahd, scb_data->hscb_dmat, hscb_map->dmamap, 6110 hscb_map->vaddr, PAGE_SIZE, ahd_dmamap_cb, 6111 &hscb_map->busaddr, /*flags*/0); 6112 6113 hscb = (struct hardware_scb *)hscb_map->vaddr; 6114 hscb_busaddr = hscb_map->busaddr; 6115 scb_data->scbs_left = PAGE_SIZE / sizeof(*hscb); 6116 } 6117 6118 if (scb_data->sgs_left != 0) { 6119 int offset; 6120 6121 offset = ((ahd_sglist_allocsize(ahd) / ahd_sglist_size(ahd)) 6122 - scb_data->sgs_left) * ahd_sglist_size(ahd); 6123 sg_map = SLIST_FIRST(&scb_data->sg_maps); 6124 segs = sg_map->vaddr + offset; 6125 sg_busaddr = sg_map->busaddr + offset; 6126 } else { 6127 sg_map = malloc(sizeof(*sg_map), M_DEVBUF, M_NOWAIT); 6128 6129 if (sg_map == NULL) 6130 return (0); 6131 6132 /* Allocate the next batch of S/G lists */ 6133 if (aic_dmamem_alloc(ahd, scb_data->sg_dmat, 6134 (void **)&sg_map->vaddr, 6135 BUS_DMA_NOWAIT | BUS_DMA_COHERENT, 6136 &sg_map->dmamap) != 0) { 6137 free(sg_map, M_DEVBUF); 6138 return (0); 6139 } 6140 6141 SLIST_INSERT_HEAD(&scb_data->sg_maps, sg_map, links); 6142 6143 aic_dmamap_load(ahd, scb_data->sg_dmat, sg_map->dmamap, 6144 sg_map->vaddr, ahd_sglist_allocsize(ahd), 6145 ahd_dmamap_cb, &sg_map->busaddr, /*flags*/0); 6146 6147 segs = sg_map->vaddr; 6148 sg_busaddr = sg_map->busaddr; 6149 scb_data->sgs_left = 6150 ahd_sglist_allocsize(ahd) / ahd_sglist_size(ahd); 6151#ifdef AHD_DEBUG 6152 if (ahd_debug & AHD_SHOW_MEMORY) 6153 printf("Mapped SG data\n"); 6154#endif 6155 } 6156 6157 if (scb_data->sense_left != 0) { 6158 int offset; 6159 6160 offset = PAGE_SIZE - (AHD_SENSE_BUFSIZE * scb_data->sense_left); 6161 sense_map = SLIST_FIRST(&scb_data->sense_maps); 6162 sense_data = sense_map->vaddr + offset; 6163 sense_busaddr = sense_map->busaddr + offset; 6164 } else { 6165 sense_map = malloc(sizeof(*sense_map), M_DEVBUF, M_NOWAIT); 6166 6167 if (sense_map == NULL) 6168 return (0); 6169 6170 /* Allocate the next batch of sense buffers */ 6171 if (aic_dmamem_alloc(ahd, scb_data->sense_dmat, 6172 (void **)&sense_map->vaddr, 6173 BUS_DMA_NOWAIT, &sense_map->dmamap) != 0) { 6174 free(sense_map, M_DEVBUF); 6175 return (0); 6176 } 6177 6178 SLIST_INSERT_HEAD(&scb_data->sense_maps, sense_map, links); 6179 6180 aic_dmamap_load(ahd, scb_data->sense_dmat, sense_map->dmamap, 6181 sense_map->vaddr, PAGE_SIZE, ahd_dmamap_cb, 6182 &sense_map->busaddr, /*flags*/0); 6183 6184 sense_data = sense_map->vaddr; 6185 sense_busaddr = sense_map->busaddr; 6186 scb_data->sense_left = PAGE_SIZE / AHD_SENSE_BUFSIZE; 6187#ifdef AHD_DEBUG 6188 if (ahd_debug & AHD_SHOW_MEMORY) 6189 printf("Mapped sense data\n"); 6190#endif 6191 } 6192 6193 newcount = MIN(scb_data->sense_left, scb_data->scbs_left); 6194 newcount = MIN(newcount, scb_data->sgs_left); 6195 newcount = MIN(newcount, (AHD_SCB_MAX_ALLOC - scb_data->numscbs)); 6196 scb_data->sense_left -= newcount; 6197 scb_data->scbs_left -= newcount; 6198 scb_data->sgs_left -= newcount; 6199 for (i = 0; i < newcount; i++) { 6200 struct scb_platform_data *pdata; 6201 u_int col_tag; 6202#ifndef __linux__ 6203 int error; 6204#endif 6205 6206 next_scb = (struct scb *)malloc(sizeof(*next_scb), 6207 M_DEVBUF, M_NOWAIT); 6208 if (next_scb == NULL) 6209 break; 6210 6211 pdata = (struct scb_platform_data *)malloc(sizeof(*pdata), 6212 M_DEVBUF, M_NOWAIT); 6213 if (pdata == NULL) { 6214 free(next_scb, M_DEVBUF); 6215 break; 6216 } 6217 next_scb->platform_data = pdata; 6218 next_scb->hscb_map = hscb_map; 6219 next_scb->sg_map = sg_map; 6220 next_scb->sense_map = sense_map; 6221 next_scb->sg_list = segs; 6222 next_scb->sense_data = sense_data; 6223 next_scb->sense_busaddr = sense_busaddr; 6224 memset(hscb, 0, sizeof(*hscb)); 6225 next_scb->hscb = hscb; 6226 hscb->hscb_busaddr = aic_htole32(hscb_busaddr); 6227 6228 /* 6229 * The sequencer always starts with the second entry. 6230 * The first entry is embedded in the scb. 6231 */ 6232 next_scb->sg_list_busaddr = sg_busaddr; 6233 if ((ahd->flags & AHD_64BIT_ADDRESSING) != 0) 6234 next_scb->sg_list_busaddr 6235 += sizeof(struct ahd_dma64_seg); 6236 else 6237 next_scb->sg_list_busaddr += sizeof(struct ahd_dma_seg); 6238 next_scb->ahd_softc = ahd; 6239 next_scb->flags = SCB_FLAG_NONE; 6240#ifndef __linux__ 6241 error = aic_dmamap_create(ahd, ahd->buffer_dmat, /*flags*/0, 6242 &next_scb->dmamap); 6243 if (error != 0) { 6244 free(next_scb, M_DEVBUF); 6245 free(pdata, M_DEVBUF); 6246 break; 6247 } 6248#endif 6249 next_scb->hscb->tag = aic_htole16(scb_data->numscbs); 6250 col_tag = scb_data->numscbs ^ 0x100; 6251 next_scb->col_scb = ahd_find_scb_by_tag(ahd, col_tag); 6252 if (next_scb->col_scb != NULL) 6253 next_scb->col_scb->col_scb = next_scb; 6254 aic_timer_init(&next_scb->io_timer); 6255 ahd_free_scb(ahd, next_scb); 6256 hscb++; 6257 hscb_busaddr += sizeof(*hscb); 6258 segs += ahd_sglist_size(ahd); 6259 sg_busaddr += ahd_sglist_size(ahd); 6260 sense_data += AHD_SENSE_BUFSIZE; 6261 sense_busaddr += AHD_SENSE_BUFSIZE; 6262 scb_data->numscbs++; 6263 } 6264 return (i); 6265} 6266 6267void 6268ahd_controller_info(struct ahd_softc *ahd, char *buf) 6269{ 6270 const char *speed; 6271 const char *type; 6272 int len; 6273 6274 len = sprintf(buf, "%s: ", ahd_chip_names[ahd->chip & AHD_CHIPID_MASK]); 6275 buf += len; 6276 6277 speed = "Ultra320 "; 6278 if ((ahd->features & AHD_WIDE) != 0) { 6279 type = "Wide "; 6280 } else { 6281 type = "Single "; 6282 } 6283 len = sprintf(buf, "%s%sChannel %c, SCSI Id=%d, ", 6284 speed, type, ahd->channel, ahd->our_id); 6285 buf += len; 6286 6287 sprintf(buf, "%s, %d SCBs", ahd->bus_description, 6288 ahd->scb_data.maxhscbs); 6289} 6290 6291static const char *channel_strings[] = { 6292 "Primary Low", 6293 "Primary High", 6294 "Secondary Low", 6295 "Secondary High" 6296}; 6297 6298static const char *termstat_strings[] = { 6299 "Terminated Correctly", 6300 "Over Terminated", 6301 "Under Terminated", 6302 "Not Configured" 6303}; 6304 6305/* 6306 * Start the board, ready for normal operation 6307 */ 6308int 6309ahd_init(struct ahd_softc *ahd) 6310{ 6311 uint8_t *next_vaddr; 6312 bus_addr_t next_baddr; 6313 size_t driver_data_size; 6314 int i; 6315 int error; 6316 u_int warn_user; 6317 uint8_t current_sensing; 6318 uint8_t fstat; 6319 6320 AHD_ASSERT_MODES(ahd, AHD_MODE_SCSI_MSK, AHD_MODE_SCSI_MSK); 6321 6322 ahd->stack_size = ahd_probe_stack_size(ahd); 6323 ahd->saved_stack = malloc(ahd->stack_size * sizeof(uint16_t), 6324 M_DEVBUF, M_NOWAIT); 6325 if (ahd->saved_stack == NULL) 6326 return (ENOMEM); 6327 6328 /* 6329 * Verify that the compiler hasn't over-agressively 6330 * padded important structures. 6331 */ 6332 if (sizeof(struct hardware_scb) != 64) 6333 panic("Hardware SCB size is incorrect"); 6334 6335#ifdef AHD_DEBUG 6336 if ((ahd_debug & AHD_DEBUG_SEQUENCER) != 0) 6337 ahd->flags |= AHD_SEQUENCER_DEBUG; 6338#endif 6339 6340 /* 6341 * Default to allowing initiator operations. 6342 */ 6343 ahd->flags |= AHD_INITIATORROLE; 6344 6345 /* 6346 * Only allow target mode features if this unit has them enabled. 6347 */ 6348 if ((AHD_TMODE_ENABLE & (0x1 << ahd->unit)) == 0) 6349 ahd->features &= ~AHD_TARGETMODE; 6350 6351#ifndef __linux__ 6352 /* DMA tag for mapping buffers into device visible space. */ 6353 if (aic_dma_tag_create(ahd, ahd->parent_dmat, /*alignment*/1, 6354 /*boundary*/BUS_SPACE_MAXADDR_32BIT + 1, 6355 /*lowaddr*/ahd->flags & AHD_39BIT_ADDRESSING 6356 ? (bus_addr_t)0x7FFFFFFFFFULL 6357 : BUS_SPACE_MAXADDR_32BIT, 6358 /*highaddr*/BUS_SPACE_MAXADDR, 6359 /*filter*/NULL, /*filterarg*/NULL, 6360 /*maxsize*/(AHD_NSEG - 1) * PAGE_SIZE, 6361 /*nsegments*/AHD_NSEG, 6362 /*maxsegsz*/AHD_MAXTRANSFER_SIZE, 6363 /*flags*/BUS_DMA_ALLOCNOW, 6364 &ahd->buffer_dmat) != 0) { 6365 return (ENOMEM); 6366 } 6367#endif 6368 6369 ahd->init_level++; 6370 6371 /* 6372 * DMA tag for our command fifos and other data in system memory 6373 * the card's sequencer must be able to access. For initiator 6374 * roles, we need to allocate space for the qoutfifo. When providing 6375 * for the target mode role, we must additionally provide space for 6376 * the incoming target command fifo. 6377 */ 6378 driver_data_size = AHD_SCB_MAX * sizeof(*ahd->qoutfifo) 6379 + sizeof(struct hardware_scb); 6380 if ((ahd->features & AHD_TARGETMODE) != 0) 6381 driver_data_size += AHD_TMODE_CMDS * sizeof(struct target_cmd); 6382 if ((ahd->bugs & AHD_PKT_BITBUCKET_BUG) != 0) 6383 driver_data_size += PKT_OVERRUN_BUFSIZE; 6384 if (aic_dma_tag_create(ahd, ahd->parent_dmat, /*alignment*/1, 6385 /*boundary*/BUS_SPACE_MAXADDR_32BIT + 1, 6386 /*lowaddr*/BUS_SPACE_MAXADDR_32BIT, 6387 /*highaddr*/BUS_SPACE_MAXADDR, 6388 /*filter*/NULL, /*filterarg*/NULL, 6389 driver_data_size, 6390 /*nsegments*/1, 6391 /*maxsegsz*/BUS_SPACE_MAXSIZE_32BIT, 6392 /*flags*/0, &ahd->shared_data_dmat) != 0) { 6393 return (ENOMEM); 6394 } 6395 6396 ahd->init_level++; 6397 6398 /* Allocation of driver data */ 6399 if (aic_dmamem_alloc(ahd, ahd->shared_data_dmat, 6400 (void **)&ahd->shared_data_map.vaddr, 6401 BUS_DMA_NOWAIT | BUS_DMA_COHERENT, 6402 &ahd->shared_data_map.dmamap) != 0) { 6403 return (ENOMEM); 6404 } 6405 6406 ahd->init_level++; 6407 6408 /* And permanently map it in */ 6409 aic_dmamap_load(ahd, ahd->shared_data_dmat, ahd->shared_data_map.dmamap, 6410 ahd->shared_data_map.vaddr, driver_data_size, 6411 ahd_dmamap_cb, &ahd->shared_data_map.busaddr, 6412 /*flags*/0); 6413 ahd->qoutfifo = (struct ahd_completion *)ahd->shared_data_map.vaddr; 6414 next_vaddr = (uint8_t *)&ahd->qoutfifo[AHD_QOUT_SIZE]; 6415 next_baddr = ahd->shared_data_map.busaddr 6416 + AHD_QOUT_SIZE*sizeof(struct ahd_completion); 6417 if ((ahd->features & AHD_TARGETMODE) != 0) { 6418 ahd->targetcmds = (struct target_cmd *)next_vaddr; 6419 next_vaddr += AHD_TMODE_CMDS * sizeof(struct target_cmd); 6420 next_baddr += AHD_TMODE_CMDS * sizeof(struct target_cmd); 6421 } 6422 6423 if ((ahd->bugs & AHD_PKT_BITBUCKET_BUG) != 0) { 6424 ahd->overrun_buf = next_vaddr; 6425 next_vaddr += PKT_OVERRUN_BUFSIZE; 6426 next_baddr += PKT_OVERRUN_BUFSIZE; 6427 } 6428 6429 /* 6430 * We need one SCB to serve as the "next SCB". Since the 6431 * tag identifier in this SCB will never be used, there is 6432 * no point in using a valid HSCB tag from an SCB pulled from 6433 * the standard free pool. So, we allocate this "sentinel" 6434 * specially from the DMA safe memory chunk used for the QOUTFIFO. 6435 */ 6436 ahd->next_queued_hscb = (struct hardware_scb *)next_vaddr; 6437 ahd->next_queued_hscb_map = &ahd->shared_data_map; 6438 ahd->next_queued_hscb->hscb_busaddr = aic_htole32(next_baddr); 6439 6440 ahd->init_level++; 6441 6442 /* Allocate SCB data now that buffer_dmat is initialized */ 6443 if (ahd_init_scbdata(ahd) != 0) 6444 return (ENOMEM); 6445 6446 if ((ahd->flags & AHD_INITIATORROLE) == 0) 6447 ahd->flags &= ~AHD_RESET_BUS_A; 6448 6449 /* 6450 * Before committing these settings to the chip, give 6451 * the OSM one last chance to modify our configuration. 6452 */ 6453 ahd_platform_init(ahd); 6454 6455 /* Bring up the chip. */ 6456 ahd_chip_init(ahd); 6457 6458 AHD_ASSERT_MODES(ahd, AHD_MODE_SCSI_MSK, AHD_MODE_SCSI_MSK); 6459 6460 if ((ahd->flags & AHD_CURRENT_SENSING) == 0) 6461 goto init_done; 6462 6463 /* 6464 * Verify termination based on current draw and 6465 * warn user if the bus is over/under terminated. 6466 */ 6467 error = ahd_write_flexport(ahd, FLXADDR_ROMSTAT_CURSENSECTL, 6468 CURSENSE_ENB); 6469 if (error != 0) { 6470 printf("%s: current sensing timeout 1\n", ahd_name(ahd)); 6471 goto init_done; 6472 } 6473 for (i = 20, fstat = FLX_FSTAT_BUSY; 6474 (fstat & FLX_FSTAT_BUSY) != 0 && i; i--) { 6475 error = ahd_read_flexport(ahd, FLXADDR_FLEXSTAT, &fstat); 6476 if (error != 0) { 6477 printf("%s: current sensing timeout 2\n", 6478 ahd_name(ahd)); 6479 goto init_done; 6480 } 6481 } 6482 if (i == 0) { 6483 printf("%s: Timedout during current-sensing test\n", 6484 ahd_name(ahd)); 6485 goto init_done; 6486 } 6487 6488 /* Latch Current Sensing status. */ 6489 error = ahd_read_flexport(ahd, FLXADDR_CURRENT_STAT, ¤t_sensing); 6490 if (error != 0) { 6491 printf("%s: current sensing timeout 3\n", ahd_name(ahd)); 6492 goto init_done; 6493 } 6494 6495 /* Diable current sensing. */ 6496 ahd_write_flexport(ahd, FLXADDR_ROMSTAT_CURSENSECTL, 0); 6497 6498#ifdef AHD_DEBUG 6499 if ((ahd_debug & AHD_SHOW_TERMCTL) != 0) { 6500 printf("%s: current_sensing == 0x%x\n", 6501 ahd_name(ahd), current_sensing); 6502 } 6503#endif 6504 warn_user = 0; 6505 for (i = 0; i < 4; i++, current_sensing >>= FLX_CSTAT_SHIFT) { 6506 u_int term_stat; 6507 6508 term_stat = (current_sensing & FLX_CSTAT_MASK); 6509 switch (term_stat) { 6510 case FLX_CSTAT_OVER: 6511 case FLX_CSTAT_UNDER: 6512 warn_user++; 6513 case FLX_CSTAT_INVALID: 6514 case FLX_CSTAT_OKAY: 6515 if (warn_user == 0 && bootverbose == 0) 6516 break; 6517 printf("%s: %s Channel %s\n", ahd_name(ahd), 6518 channel_strings[i], termstat_strings[term_stat]); 6519 break; 6520 } 6521 } 6522 if (warn_user) { 6523 printf("%s: WARNING. Termination is not configured correctly.\n" 6524 "%s: WARNING. SCSI bus operations may FAIL.\n", 6525 ahd_name(ahd), ahd_name(ahd)); 6526 AHD_CORRECTABLE_ERROR(ahd); 6527 } 6528init_done: 6529 ahd_restart(ahd); 6530 aic_timer_reset(&ahd->stat_timer, AHD_STAT_UPDATE_MS, 6531 ahd_stat_timer, ahd); 6532 return (0); 6533} 6534 6535/* 6536 * (Re)initialize chip state after a chip reset. 6537 */ 6538static void 6539ahd_chip_init(struct ahd_softc *ahd) 6540{ 6541 uint32_t busaddr; 6542 u_int sxfrctl1; 6543 u_int scsiseq_template; 6544 u_int wait; 6545 u_int i; 6546 u_int target; 6547 6548 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 6549 /* 6550 * Take the LED out of diagnostic mode 6551 */ 6552 ahd_outb(ahd, SBLKCTL, ahd_inb(ahd, SBLKCTL) & ~(DIAGLEDEN|DIAGLEDON)); 6553 6554 /* 6555 * Return HS_MAILBOX to its default value. 6556 */ 6557 ahd->hs_mailbox = 0; 6558 ahd_outb(ahd, HS_MAILBOX, 0); 6559 6560 /* Set the SCSI Id, SXFRCTL0, SXFRCTL1, and SIMODE1. */ 6561 ahd_outb(ahd, IOWNID, ahd->our_id); 6562 ahd_outb(ahd, TOWNID, ahd->our_id); 6563 sxfrctl1 = (ahd->flags & AHD_TERM_ENB_A) != 0 ? STPWEN : 0; 6564 sxfrctl1 |= (ahd->flags & AHD_SPCHK_ENB_A) != 0 ? ENSPCHK : 0; 6565 if ((ahd->bugs & AHD_LONG_SETIMO_BUG) 6566 && (ahd->seltime != STIMESEL_MIN)) { 6567 /* 6568 * The selection timer duration is twice as long 6569 * as it should be. Halve it by adding "1" to 6570 * the user specified setting. 6571 */ 6572 sxfrctl1 |= ahd->seltime + STIMESEL_BUG_ADJ; 6573 } else { 6574 sxfrctl1 |= ahd->seltime; 6575 } 6576 6577 ahd_outb(ahd, SXFRCTL0, DFON); 6578 ahd_outb(ahd, SXFRCTL1, sxfrctl1|ahd->seltime|ENSTIMER|ACTNEGEN); 6579 ahd_outb(ahd, SIMODE1, ENSELTIMO|ENSCSIRST|ENSCSIPERR); 6580 6581 /* 6582 * Now that termination is set, wait for up 6583 * to 500ms for our transceivers to settle. If 6584 * the adapter does not have a cable attached, 6585 * the transceivers may never settle, so don't 6586 * complain if we fail here. 6587 */ 6588 for (wait = 10000; 6589 (ahd_inb(ahd, SBLKCTL) & (ENAB40|ENAB20)) == 0 && wait; 6590 wait--) 6591 aic_delay(100); 6592 6593 /* Clear any false bus resets due to the transceivers settling */ 6594 ahd_outb(ahd, CLRSINT1, CLRSCSIRSTI); 6595 ahd_outb(ahd, CLRINT, CLRSCSIINT); 6596 6597 /* Initialize mode specific S/G state. */ 6598 for (i = 0; i < 2; i++) { 6599 ahd_set_modes(ahd, AHD_MODE_DFF0 + i, AHD_MODE_DFF0 + i); 6600 ahd_outb(ahd, LONGJMP_ADDR + 1, INVALID_ADDR); 6601 ahd_outb(ahd, SG_STATE, 0); 6602 ahd_outb(ahd, CLRSEQINTSRC, 0xFF); 6603 ahd_outb(ahd, SEQIMODE, 6604 ENSAVEPTRS|ENCFG4DATA|ENCFG4ISTAT 6605 |ENCFG4TSTAT|ENCFG4ICMD|ENCFG4TCMD); 6606 } 6607 6608 ahd_set_modes(ahd, AHD_MODE_CFG, AHD_MODE_CFG); 6609 ahd_outb(ahd, DSCOMMAND0, ahd_inb(ahd, DSCOMMAND0)|MPARCKEN|CACHETHEN); 6610 ahd_outb(ahd, DFF_THRSH, RD_DFTHRSH_75|WR_DFTHRSH_75); 6611 ahd_outb(ahd, SIMODE0, ENIOERR|ENOVERRUN); 6612 ahd_outb(ahd, SIMODE3, ENNTRAMPERR|ENOSRAMPERR); 6613 if ((ahd->bugs & AHD_BUSFREEREV_BUG) != 0) { 6614 ahd_outb(ahd, OPTIONMODE, AUTOACKEN|AUTO_MSGOUT_DE); 6615 } else { 6616 ahd_outb(ahd, OPTIONMODE, AUTOACKEN|BUSFREEREV|AUTO_MSGOUT_DE); 6617 } 6618 ahd_outb(ahd, SCSCHKN, CURRFIFODEF|WIDERESEN|SHVALIDSTDIS); 6619 if ((ahd->chip & AHD_BUS_MASK) == AHD_PCIX) 6620 /* 6621 * Do not issue a target abort when a split completion 6622 * error occurs. Let our PCIX interrupt handler deal 6623 * with it instead. H2A4 Razor #625 6624 */ 6625 ahd_outb(ahd, PCIXCTL, ahd_inb(ahd, PCIXCTL) | SPLTSTADIS); 6626 6627 if ((ahd->bugs & AHD_LQOOVERRUN_BUG) != 0) 6628 ahd_outb(ahd, LQOSCSCTL, LQONOCHKOVER); 6629 6630 /* 6631 * Tweak IOCELL settings. 6632 */ 6633 if ((ahd->flags & AHD_HP_BOARD) != 0) { 6634 for (i = 0; i < NUMDSPS; i++) { 6635 ahd_outb(ahd, DSPSELECT, i); 6636 ahd_outb(ahd, WRTBIASCTL, WRTBIASCTL_HP_DEFAULT); 6637 } 6638#ifdef AHD_DEBUG 6639 if ((ahd_debug & AHD_SHOW_MISC) != 0) 6640 printf("%s: WRTBIASCTL now 0x%x\n", ahd_name(ahd), 6641 WRTBIASCTL_HP_DEFAULT); 6642#endif 6643 } 6644 ahd_setup_iocell_workaround(ahd); 6645 6646 /* 6647 * Enable LQI Manager interrupts. 6648 */ 6649 ahd_outb(ahd, LQIMODE1, ENLQIPHASE_LQ|ENLQIPHASE_NLQ|ENLIQABORT 6650 | ENLQICRCI_LQ|ENLQICRCI_NLQ|ENLQIBADLQI 6651 | ENLQIOVERI_LQ|ENLQIOVERI_NLQ); 6652 ahd_outb(ahd, LQOMODE0, ENLQOATNLQ|ENLQOATNPKT|ENLQOTCRC); 6653 /* 6654 * We choose to have the sequencer catch LQOPHCHGINPKT errors 6655 * manually for the command phase at the start of a packetized 6656 * selection case. ENLQOBUSFREE should be made redundant by 6657 * the BUSFREE interrupt, but it seems that some LQOBUSFREE 6658 * events fail to assert the BUSFREE interrupt so we must 6659 * also enable LQOBUSFREE interrupts. 6660 */ 6661 ahd_outb(ahd, LQOMODE1, ENLQOBUSFREE); 6662 6663 /* 6664 * Setup sequencer interrupt handlers. 6665 */ 6666 ahd_outw(ahd, INTVEC1_ADDR, ahd_resolve_seqaddr(ahd, LABEL_seq_isr)); 6667 ahd_outw(ahd, INTVEC2_ADDR, ahd_resolve_seqaddr(ahd, LABEL_timer_isr)); 6668 6669 /* 6670 * Setup SCB Offset registers. 6671 */ 6672 if ((ahd->bugs & AHD_PKT_LUN_BUG) != 0) { 6673 ahd_outb(ahd, LUNPTR, offsetof(struct hardware_scb, 6674 pkt_long_lun)); 6675 } else { 6676 ahd_outb(ahd, LUNPTR, offsetof(struct hardware_scb, lun)); 6677 } 6678 ahd_outb(ahd, CMDLENPTR, offsetof(struct hardware_scb, cdb_len)); 6679 ahd_outb(ahd, ATTRPTR, offsetof(struct hardware_scb, task_attribute)); 6680 ahd_outb(ahd, FLAGPTR, offsetof(struct hardware_scb, task_management)); 6681 ahd_outb(ahd, CMDPTR, offsetof(struct hardware_scb, 6682 shared_data.idata.cdb)); 6683 ahd_outb(ahd, QNEXTPTR, 6684 offsetof(struct hardware_scb, next_hscb_busaddr)); 6685 ahd_outb(ahd, ABRTBITPTR, MK_MESSAGE_BIT_OFFSET); 6686 ahd_outb(ahd, ABRTBYTEPTR, offsetof(struct hardware_scb, control)); 6687 if ((ahd->bugs & AHD_PKT_LUN_BUG) != 0) { 6688 ahd_outb(ahd, LUNLEN, 6689 sizeof(ahd->next_queued_hscb->pkt_long_lun) - 1); 6690 } else { 6691 ahd_outb(ahd, LUNLEN, LUNLEN_SINGLE_LEVEL_LUN); 6692 } 6693 ahd_outb(ahd, CDBLIMIT, SCB_CDB_LEN_PTR - 1); 6694 ahd_outb(ahd, MAXCMD, 0xFF); 6695 ahd_outb(ahd, SCBAUTOPTR, 6696 AUSCBPTR_EN | offsetof(struct hardware_scb, tag)); 6697 6698 /* We haven't been enabled for target mode yet. */ 6699 ahd_outb(ahd, MULTARGID, 0); 6700 ahd_outb(ahd, MULTARGID + 1, 0); 6701 6702 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 6703 /* Initialize the negotiation table. */ 6704 if ((ahd->features & AHD_NEW_IOCELL_OPTS) == 0) { 6705 /* 6706 * Clear the spare bytes in the neg table to avoid 6707 * spurious parity errors. 6708 */ 6709 for (target = 0; target < AHD_NUM_TARGETS; target++) { 6710 ahd_outb(ahd, NEGOADDR, target); 6711 ahd_outb(ahd, ANNEXCOL, AHD_ANNEXCOL_PER_DEV0); 6712 for (i = 0; i < AHD_NUM_PER_DEV_ANNEXCOLS; i++) 6713 ahd_outb(ahd, ANNEXDAT, 0); 6714 } 6715 } 6716 for (target = 0; target < AHD_NUM_TARGETS; target++) { 6717 struct ahd_devinfo devinfo; 6718 struct ahd_initiator_tinfo *tinfo; 6719 struct ahd_tmode_tstate *tstate; 6720 6721 tinfo = ahd_fetch_transinfo(ahd, 'A', ahd->our_id, 6722 target, &tstate); 6723 ahd_compile_devinfo(&devinfo, ahd->our_id, 6724 target, CAM_LUN_WILDCARD, 6725 'A', ROLE_INITIATOR); 6726 ahd_update_neg_table(ahd, &devinfo, &tinfo->curr); 6727 } 6728 6729 ahd_outb(ahd, CLRSINT3, NTRAMPERR|OSRAMPERR); 6730 ahd_outb(ahd, CLRINT, CLRSCSIINT); 6731 6732#ifdef NEEDS_MORE_TESTING 6733 /* 6734 * Always enable abort on incoming L_Qs if this feature is 6735 * supported. We use this to catch invalid SCB references. 6736 */ 6737 if ((ahd->bugs & AHD_ABORT_LQI_BUG) == 0) 6738 ahd_outb(ahd, LQCTL1, ABORTPENDING); 6739 else 6740#endif 6741 ahd_outb(ahd, LQCTL1, 0); 6742 6743 /* All of our queues are empty */ 6744 ahd->qoutfifonext = 0; 6745 ahd->qoutfifonext_valid_tag = QOUTFIFO_ENTRY_VALID; 6746 ahd_outb(ahd, QOUTFIFO_ENTRY_VALID_TAG, QOUTFIFO_ENTRY_VALID); 6747 for (i = 0; i < AHD_QOUT_SIZE; i++) 6748 ahd->qoutfifo[i].valid_tag = 0; 6749 ahd_sync_qoutfifo(ahd, BUS_DMASYNC_PREREAD); 6750 6751 ahd->qinfifonext = 0; 6752 for (i = 0; i < AHD_QIN_SIZE; i++) 6753 ahd->qinfifo[i] = SCB_LIST_NULL; 6754 6755 if ((ahd->features & AHD_TARGETMODE) != 0) { 6756 /* All target command blocks start out invalid. */ 6757 for (i = 0; i < AHD_TMODE_CMDS; i++) 6758 ahd->targetcmds[i].cmd_valid = 0; 6759 ahd_sync_tqinfifo(ahd, BUS_DMASYNC_PREREAD); 6760 ahd->tqinfifonext = 1; 6761 ahd_outb(ahd, KERNEL_TQINPOS, ahd->tqinfifonext - 1); 6762 ahd_outb(ahd, TQINPOS, ahd->tqinfifonext); 6763 } 6764 6765 /* Initialize Scratch Ram. */ 6766 ahd_outb(ahd, SEQ_FLAGS, 0); 6767 ahd_outb(ahd, SEQ_FLAGS2, 0); 6768 6769 /* We don't have any waiting selections */ 6770 ahd_outw(ahd, WAITING_TID_HEAD, SCB_LIST_NULL); 6771 ahd_outw(ahd, WAITING_TID_TAIL, SCB_LIST_NULL); 6772 ahd_outw(ahd, MK_MESSAGE_SCB, SCB_LIST_NULL); 6773 ahd_outw(ahd, MK_MESSAGE_SCSIID, 0xFF); 6774 for (i = 0; i < AHD_NUM_TARGETS; i++) 6775 ahd_outw(ahd, WAITING_SCB_TAILS + (2 * i), SCB_LIST_NULL); 6776 6777 /* 6778 * Nobody is waiting to be DMAed into the QOUTFIFO. 6779 */ 6780 ahd_outw(ahd, COMPLETE_SCB_HEAD, SCB_LIST_NULL); 6781 ahd_outw(ahd, COMPLETE_SCB_DMAINPROG_HEAD, SCB_LIST_NULL); 6782 ahd_outw(ahd, COMPLETE_DMA_SCB_HEAD, SCB_LIST_NULL); 6783 ahd_outw(ahd, COMPLETE_DMA_SCB_TAIL, SCB_LIST_NULL); 6784 ahd_outw(ahd, COMPLETE_ON_QFREEZE_HEAD, SCB_LIST_NULL); 6785 6786 /* 6787 * The Freeze Count is 0. 6788 */ 6789 ahd->qfreeze_cnt = 0; 6790 ahd_outw(ahd, QFREEZE_COUNT, 0); 6791 ahd_outw(ahd, KERNEL_QFREEZE_COUNT, 0); 6792 6793 /* 6794 * Tell the sequencer where it can find our arrays in memory. 6795 */ 6796 busaddr = ahd->shared_data_map.busaddr; 6797 ahd_outl(ahd, SHARED_DATA_ADDR, busaddr); 6798 ahd_outl(ahd, QOUTFIFO_NEXT_ADDR, busaddr); 6799 6800 /* 6801 * Setup the allowed SCSI Sequences based on operational mode. 6802 * If we are a target, we'll enable select in operations once 6803 * we've had a lun enabled. 6804 */ 6805 scsiseq_template = ENAUTOATNP; 6806 if ((ahd->flags & AHD_INITIATORROLE) != 0) 6807 scsiseq_template |= ENRSELI; 6808 ahd_outb(ahd, SCSISEQ_TEMPLATE, scsiseq_template); 6809 6810 /* There are no busy SCBs yet. */ 6811 for (target = 0; target < AHD_NUM_TARGETS; target++) { 6812 int lun; 6813 6814 for (lun = 0; lun < AHD_NUM_LUNS_NONPKT; lun++) 6815 ahd_unbusy_tcl(ahd, BUILD_TCL_RAW(target, 'A', lun)); 6816 } 6817 6818 /* 6819 * Initialize the group code to command length table. 6820 * Vendor Unique codes are set to 0 so we only capture 6821 * the first byte of the cdb. These can be overridden 6822 * when target mode is enabled. 6823 */ 6824 ahd_outb(ahd, CMDSIZE_TABLE, 5); 6825 ahd_outb(ahd, CMDSIZE_TABLE + 1, 9); 6826 ahd_outb(ahd, CMDSIZE_TABLE + 2, 9); 6827 ahd_outb(ahd, CMDSIZE_TABLE + 3, 0); 6828 ahd_outb(ahd, CMDSIZE_TABLE + 4, 15); 6829 ahd_outb(ahd, CMDSIZE_TABLE + 5, 11); 6830 ahd_outb(ahd, CMDSIZE_TABLE + 6, 0); 6831 ahd_outb(ahd, CMDSIZE_TABLE + 7, 0); 6832 6833 /* Tell the sequencer of our initial queue positions */ 6834 ahd_set_modes(ahd, AHD_MODE_CCHAN, AHD_MODE_CCHAN); 6835 ahd_outb(ahd, QOFF_CTLSTA, SCB_QSIZE_512); 6836 ahd->qinfifonext = 0; 6837 ahd_set_hnscb_qoff(ahd, ahd->qinfifonext); 6838 ahd_set_hescb_qoff(ahd, 0); 6839 ahd_set_snscb_qoff(ahd, 0); 6840 ahd_set_sescb_qoff(ahd, 0); 6841 ahd_set_sdscb_qoff(ahd, 0); 6842 6843 /* 6844 * Tell the sequencer which SCB will be the next one it receives. 6845 */ 6846 busaddr = aic_le32toh(ahd->next_queued_hscb->hscb_busaddr); 6847 ahd_outl(ahd, NEXT_QUEUED_SCB_ADDR, busaddr); 6848 6849 /* 6850 * Default to coalescing disabled. 6851 */ 6852 ahd_outw(ahd, INT_COALESCING_CMDCOUNT, 0); 6853 ahd_outw(ahd, CMDS_PENDING, 0); 6854 ahd_update_coalescing_values(ahd, ahd->int_coalescing_timer, 6855 ahd->int_coalescing_maxcmds, 6856 ahd->int_coalescing_mincmds); 6857 ahd_enable_coalescing(ahd, FALSE); 6858 6859 ahd_loadseq(ahd); 6860 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 6861} 6862 6863/* 6864 * Setup default device and controller settings. 6865 * This should only be called if our probe has 6866 * determined that no configuration data is available. 6867 */ 6868int 6869ahd_default_config(struct ahd_softc *ahd) 6870{ 6871 int targ; 6872 6873 ahd->our_id = 7; 6874 6875 /* 6876 * Allocate a tstate to house information for our 6877 * initiator presence on the bus as well as the user 6878 * data for any target mode initiator. 6879 */ 6880 if (ahd_alloc_tstate(ahd, ahd->our_id, 'A') == NULL) { 6881 printf("%s: unable to allocate ahd_tmode_tstate. " 6882 "Failing attach\n", ahd_name(ahd)); 6883 AHD_FATAL_ERROR(ahd); 6884 return (ENOMEM); 6885 } 6886 6887 for (targ = 0; targ < AHD_NUM_TARGETS; targ++) { 6888 struct ahd_devinfo devinfo; 6889 struct ahd_initiator_tinfo *tinfo; 6890 struct ahd_tmode_tstate *tstate; 6891 uint16_t target_mask; 6892 6893 tinfo = ahd_fetch_transinfo(ahd, 'A', ahd->our_id, 6894 targ, &tstate); 6895 /* 6896 * We support SPC2 and SPI4. 6897 */ 6898 tinfo->user.protocol_version = 4; 6899 tinfo->user.transport_version = 4; 6900 6901 target_mask = 0x01 << targ; 6902 ahd->user_discenable |= target_mask; 6903 tstate->discenable |= target_mask; 6904 ahd->user_tagenable |= target_mask; 6905#ifdef AHD_FORCE_160 6906 tinfo->user.period = AHD_SYNCRATE_DT; 6907#else 6908 tinfo->user.period = AHD_SYNCRATE_160; 6909#endif 6910 tinfo->user.offset = MAX_OFFSET; 6911 tinfo->user.ppr_options = MSG_EXT_PPR_RD_STRM 6912 | MSG_EXT_PPR_WR_FLOW 6913 | MSG_EXT_PPR_HOLD_MCS 6914 | MSG_EXT_PPR_IU_REQ 6915 | MSG_EXT_PPR_QAS_REQ 6916 | MSG_EXT_PPR_DT_REQ; 6917 if ((ahd->features & AHD_RTI) != 0) 6918 tinfo->user.ppr_options |= MSG_EXT_PPR_RTI; 6919 6920 tinfo->user.width = MSG_EXT_WDTR_BUS_16_BIT; 6921 6922 /* 6923 * Start out Async/Narrow/Untagged and with 6924 * conservative protocol support. 6925 */ 6926 tinfo->goal.protocol_version = 2; 6927 tinfo->goal.transport_version = 2; 6928 tinfo->curr.protocol_version = 2; 6929 tinfo->curr.transport_version = 2; 6930 ahd_compile_devinfo(&devinfo, ahd->our_id, 6931 targ, CAM_LUN_WILDCARD, 6932 'A', ROLE_INITIATOR); 6933 tstate->tagenable &= ~target_mask; 6934 ahd_set_width(ahd, &devinfo, MSG_EXT_WDTR_BUS_8_BIT, 6935 AHD_TRANS_CUR|AHD_TRANS_GOAL, /*paused*/TRUE); 6936 ahd_set_syncrate(ahd, &devinfo, /*period*/0, /*offset*/0, 6937 /*ppr_options*/0, AHD_TRANS_CUR|AHD_TRANS_GOAL, 6938 /*paused*/TRUE); 6939 } 6940 return (0); 6941} 6942 6943/* 6944 * Parse device configuration information. 6945 */ 6946int 6947ahd_parse_cfgdata(struct ahd_softc *ahd, struct seeprom_config *sc) 6948{ 6949 int targ; 6950 int max_targ; 6951 6952 max_targ = sc->max_targets & CFMAXTARG; 6953 ahd->our_id = sc->brtime_id & CFSCSIID; 6954 6955 /* 6956 * Allocate a tstate to house information for our 6957 * initiator presence on the bus as well as the user 6958 * data for any target mode initiator. 6959 */ 6960 if (ahd_alloc_tstate(ahd, ahd->our_id, 'A') == NULL) { 6961 printf("%s: unable to allocate ahd_tmode_tstate. " 6962 "Failing attach\n", ahd_name(ahd)); 6963 AHD_FATAL_ERROR(ahd); 6964 return (ENOMEM); 6965 } 6966 6967 for (targ = 0; targ < max_targ; targ++) { 6968 struct ahd_devinfo devinfo; 6969 struct ahd_initiator_tinfo *tinfo; 6970 struct ahd_transinfo *user_tinfo; 6971 struct ahd_tmode_tstate *tstate; 6972 uint16_t target_mask; 6973 6974 tinfo = ahd_fetch_transinfo(ahd, 'A', ahd->our_id, 6975 targ, &tstate); 6976 user_tinfo = &tinfo->user; 6977 6978 /* 6979 * We support SPC2 and SPI4. 6980 */ 6981 tinfo->user.protocol_version = 4; 6982 tinfo->user.transport_version = 4; 6983 6984 target_mask = 0x01 << targ; 6985 ahd->user_discenable &= ~target_mask; 6986 tstate->discenable &= ~target_mask; 6987 ahd->user_tagenable &= ~target_mask; 6988 if (sc->device_flags[targ] & CFDISC) { 6989 tstate->discenable |= target_mask; 6990 ahd->user_discenable |= target_mask; 6991 ahd->user_tagenable |= target_mask; 6992 } else { 6993 /* 6994 * Cannot be packetized without disconnection. 6995 */ 6996 sc->device_flags[targ] &= ~CFPACKETIZED; 6997 } 6998 6999 user_tinfo->ppr_options = 0; 7000 user_tinfo->period = (sc->device_flags[targ] & CFXFER); 7001 if (user_tinfo->period < CFXFER_ASYNC) { 7002 if (user_tinfo->period <= AHD_PERIOD_10MHz) 7003 user_tinfo->ppr_options |= MSG_EXT_PPR_DT_REQ; 7004 user_tinfo->offset = MAX_OFFSET; 7005 } else { 7006 user_tinfo->offset = 0; 7007 user_tinfo->period = AHD_ASYNC_XFER_PERIOD; 7008 } 7009#ifdef AHD_FORCE_160 7010 if (user_tinfo->period <= AHD_SYNCRATE_160) 7011 user_tinfo->period = AHD_SYNCRATE_DT; 7012#endif 7013 7014 if ((sc->device_flags[targ] & CFPACKETIZED) != 0) { 7015 user_tinfo->ppr_options |= MSG_EXT_PPR_RD_STRM 7016 | MSG_EXT_PPR_WR_FLOW 7017 | MSG_EXT_PPR_HOLD_MCS 7018 | MSG_EXT_PPR_IU_REQ; 7019 if ((ahd->features & AHD_RTI) != 0) 7020 user_tinfo->ppr_options |= MSG_EXT_PPR_RTI; 7021 } 7022 7023 if ((sc->device_flags[targ] & CFQAS) != 0) 7024 user_tinfo->ppr_options |= MSG_EXT_PPR_QAS_REQ; 7025 7026 if ((sc->device_flags[targ] & CFWIDEB) != 0) 7027 user_tinfo->width = MSG_EXT_WDTR_BUS_16_BIT; 7028 else 7029 user_tinfo->width = MSG_EXT_WDTR_BUS_8_BIT; 7030#ifdef AHD_DEBUG 7031 if ((ahd_debug & AHD_SHOW_MISC) != 0) 7032 printf("(%d): %x:%x:%x:%x\n", targ, user_tinfo->width, 7033 user_tinfo->period, user_tinfo->offset, 7034 user_tinfo->ppr_options); 7035#endif 7036 /* 7037 * Start out Async/Narrow/Untagged and with 7038 * conservative protocol support. 7039 */ 7040 tstate->tagenable &= ~target_mask; 7041 tinfo->goal.protocol_version = 2; 7042 tinfo->goal.transport_version = 2; 7043 tinfo->curr.protocol_version = 2; 7044 tinfo->curr.transport_version = 2; 7045 ahd_compile_devinfo(&devinfo, ahd->our_id, 7046 targ, CAM_LUN_WILDCARD, 7047 'A', ROLE_INITIATOR); 7048 ahd_set_width(ahd, &devinfo, MSG_EXT_WDTR_BUS_8_BIT, 7049 AHD_TRANS_CUR|AHD_TRANS_GOAL, /*paused*/TRUE); 7050 ahd_set_syncrate(ahd, &devinfo, /*period*/0, /*offset*/0, 7051 /*ppr_options*/0, AHD_TRANS_CUR|AHD_TRANS_GOAL, 7052 /*paused*/TRUE); 7053 } 7054 7055 ahd->flags &= ~AHD_SPCHK_ENB_A; 7056 if (sc->bios_control & CFSPARITY) 7057 ahd->flags |= AHD_SPCHK_ENB_A; 7058 7059 ahd->flags &= ~AHD_RESET_BUS_A; 7060 if (sc->bios_control & CFRESETB) 7061 ahd->flags |= AHD_RESET_BUS_A; 7062 7063 ahd->flags &= ~AHD_EXTENDED_TRANS_A; 7064 if (sc->bios_control & CFEXTEND) 7065 ahd->flags |= AHD_EXTENDED_TRANS_A; 7066 7067 ahd->flags &= ~AHD_BIOS_ENABLED; 7068 if ((sc->bios_control & CFBIOSSTATE) == CFBS_ENABLED) 7069 ahd->flags |= AHD_BIOS_ENABLED; 7070 7071 ahd->flags &= ~AHD_STPWLEVEL_A; 7072 if ((sc->adapter_control & CFSTPWLEVEL) != 0) 7073 ahd->flags |= AHD_STPWLEVEL_A; 7074 7075 return (0); 7076} 7077 7078/* 7079 * Parse device configuration information. 7080 */ 7081int 7082ahd_parse_vpddata(struct ahd_softc *ahd, struct vpd_config *vpd) 7083{ 7084 int error; 7085 7086 error = ahd_verify_vpd_cksum(vpd); 7087 if (error == 0) 7088 return (EINVAL); 7089 if ((vpd->bios_flags & VPDBOOTHOST) != 0) 7090 ahd->flags |= AHD_BOOT_CHANNEL; 7091 return (0); 7092} 7093 7094void 7095ahd_intr_enable(struct ahd_softc *ahd, int enable) 7096{ 7097 u_int hcntrl; 7098 7099 hcntrl = ahd_inb(ahd, HCNTRL); 7100 hcntrl &= ~INTEN; 7101 ahd->pause &= ~INTEN; 7102 ahd->unpause &= ~INTEN; 7103 if (enable) { 7104 hcntrl |= INTEN; 7105 ahd->pause |= INTEN; 7106 ahd->unpause |= INTEN; 7107 } 7108 ahd_outb(ahd, HCNTRL, hcntrl); 7109} 7110 7111void 7112ahd_update_coalescing_values(struct ahd_softc *ahd, u_int timer, u_int maxcmds, 7113 u_int mincmds) 7114{ 7115 if (timer > AHD_TIMER_MAX_US) 7116 timer = AHD_TIMER_MAX_US; 7117 ahd->int_coalescing_timer = timer; 7118 7119 if (maxcmds > AHD_INT_COALESCING_MAXCMDS_MAX) 7120 maxcmds = AHD_INT_COALESCING_MAXCMDS_MAX; 7121 if (mincmds > AHD_INT_COALESCING_MINCMDS_MAX) 7122 mincmds = AHD_INT_COALESCING_MINCMDS_MAX; 7123 ahd->int_coalescing_maxcmds = maxcmds; 7124 ahd_outw(ahd, INT_COALESCING_TIMER, timer / AHD_TIMER_US_PER_TICK); 7125 ahd_outb(ahd, INT_COALESCING_MAXCMDS, -maxcmds); 7126 ahd_outb(ahd, INT_COALESCING_MINCMDS, -mincmds); 7127} 7128 7129void 7130ahd_enable_coalescing(struct ahd_softc *ahd, int enable) 7131{ 7132 7133 ahd->hs_mailbox &= ~ENINT_COALESCE; 7134 if (enable) 7135 ahd->hs_mailbox |= ENINT_COALESCE; 7136 ahd_outb(ahd, HS_MAILBOX, ahd->hs_mailbox); 7137 ahd_flush_device_writes(ahd); 7138 ahd_run_qoutfifo(ahd); 7139} 7140 7141/* 7142 * Ensure that the card is paused in a location 7143 * outside of all critical sections and that all 7144 * pending work is completed prior to returning. 7145 * This routine should only be called from outside 7146 * an interrupt context. 7147 */ 7148void 7149ahd_pause_and_flushwork(struct ahd_softc *ahd) 7150{ 7151 u_int intstat; 7152 u_int maxloops; 7153 7154 maxloops = 1000; 7155 ahd->flags |= AHD_ALL_INTERRUPTS; 7156 ahd_pause(ahd); 7157 /* 7158 * Freeze the outgoing selections. We do this only 7159 * until we are safely paused without further selections 7160 * pending. 7161 */ 7162 ahd->qfreeze_cnt--; 7163 ahd_outw(ahd, KERNEL_QFREEZE_COUNT, ahd->qfreeze_cnt); 7164 ahd_outb(ahd, SEQ_FLAGS2, ahd_inb(ahd, SEQ_FLAGS2) | SELECTOUT_QFROZEN); 7165 do { 7166 7167 ahd_unpause(ahd); 7168 /* 7169 * Give the sequencer some time to service 7170 * any active selections. 7171 */ 7172 aic_delay(500); 7173 7174 ahd_intr(ahd); 7175 ahd_pause(ahd); 7176 intstat = ahd_inb(ahd, INTSTAT); 7177 if ((intstat & INT_PEND) == 0) { 7178 ahd_clear_critical_section(ahd); 7179 intstat = ahd_inb(ahd, INTSTAT); 7180 } 7181 } while (--maxloops 7182 && (intstat != 0xFF || (ahd->features & AHD_REMOVABLE) == 0) 7183 && ((intstat & INT_PEND) != 0 7184 || (ahd_inb(ahd, SCSISEQ0) & ENSELO) != 0 7185 || (ahd_inb(ahd, SSTAT0) & (SELDO|SELINGO)) != 0)); 7186 7187 if (maxloops == 0) { 7188 printf("Infinite interrupt loop, INTSTAT = %x", 7189 ahd_inb(ahd, INTSTAT)); 7190 AHD_FATAL_ERROR(ahd); 7191 } 7192 ahd->qfreeze_cnt++; 7193 ahd_outw(ahd, KERNEL_QFREEZE_COUNT, ahd->qfreeze_cnt); 7194 7195 ahd_flush_qoutfifo(ahd); 7196 7197 ahd_platform_flushwork(ahd); 7198 ahd->flags &= ~AHD_ALL_INTERRUPTS; 7199} 7200 7201int 7202ahd_suspend(struct ahd_softc *ahd) 7203{ 7204 7205 ahd_pause_and_flushwork(ahd); 7206 7207 if (LIST_FIRST(&ahd->pending_scbs) != NULL) { 7208 ahd_unpause(ahd); 7209 return (EBUSY); 7210 } 7211 ahd_shutdown(ahd); 7212 return (0); 7213} 7214 7215int 7216ahd_resume(struct ahd_softc *ahd) 7217{ 7218 7219 ahd_reset(ahd, /*reinit*/TRUE); 7220 ahd_intr_enable(ahd, TRUE); 7221 ahd_restart(ahd); 7222 return (0); 7223} 7224 7225/************************** Busy Target Table *********************************/ 7226/* 7227 * Set SCBPTR to the SCB that contains the busy 7228 * table entry for TCL. Return the offset into 7229 * the SCB that contains the entry for TCL. 7230 * saved_scbid is dereferenced and set to the 7231 * scbid that should be restored once manipualtion 7232 * of the TCL entry is complete. 7233 */ 7234static __inline u_int 7235ahd_index_busy_tcl(struct ahd_softc *ahd, u_int *saved_scbid, u_int tcl) 7236{ 7237 /* 7238 * Index to the SCB that contains the busy entry. 7239 */ 7240 AHD_ASSERT_MODES(ahd, AHD_MODE_SCSI_MSK, AHD_MODE_SCSI_MSK); 7241 *saved_scbid = ahd_get_scbptr(ahd); 7242 ahd_set_scbptr(ahd, TCL_LUN(tcl) 7243 | ((TCL_TARGET_OFFSET(tcl) & 0xC) << 4)); 7244 7245 /* 7246 * And now calculate the SCB offset to the entry. 7247 * Each entry is 2 bytes wide, hence the 7248 * multiplication by 2. 7249 */ 7250 return (((TCL_TARGET_OFFSET(tcl) & 0x3) << 1) + SCB_DISCONNECTED_LISTS); 7251} 7252 7253/* 7254 * Return the untagged transaction id for a given target/channel lun. 7255 */ 7256u_int 7257ahd_find_busy_tcl(struct ahd_softc *ahd, u_int tcl) 7258{ 7259 u_int scbid; 7260 u_int scb_offset; 7261 u_int saved_scbptr; 7262 7263 scb_offset = ahd_index_busy_tcl(ahd, &saved_scbptr, tcl); 7264 scbid = ahd_inw_scbram(ahd, scb_offset); 7265 ahd_set_scbptr(ahd, saved_scbptr); 7266 return (scbid); 7267} 7268 7269void 7270ahd_busy_tcl(struct ahd_softc *ahd, u_int tcl, u_int scbid) 7271{ 7272 u_int scb_offset; 7273 u_int saved_scbptr; 7274 7275 scb_offset = ahd_index_busy_tcl(ahd, &saved_scbptr, tcl); 7276 ahd_outw(ahd, scb_offset, scbid); 7277 ahd_set_scbptr(ahd, saved_scbptr); 7278} 7279 7280/************************** SCB and SCB queue management **********************/ 7281int 7282ahd_match_scb(struct ahd_softc *ahd, struct scb *scb, int target, 7283 char channel, int lun, u_int tag, role_t role) 7284{ 7285 int targ = SCB_GET_TARGET(ahd, scb); 7286 char chan = SCB_GET_CHANNEL(ahd, scb); 7287 int slun = SCB_GET_LUN(scb); 7288 int match; 7289 7290 match = ((chan == channel) || (channel == ALL_CHANNELS)); 7291 if (match != 0) 7292 match = ((targ == target) || (target == CAM_TARGET_WILDCARD)); 7293 if (match != 0) 7294 match = ((lun == slun) || (lun == CAM_LUN_WILDCARD)); 7295 if (match != 0) { 7296#ifdef AHD_TARGET_MODE 7297 int group; 7298 7299 group = XPT_FC_GROUP(scb->io_ctx->ccb_h.func_code); 7300 if (role == ROLE_INITIATOR) { 7301 match = (group != XPT_FC_GROUP_TMODE) 7302 && ((tag == SCB_GET_TAG(scb)) 7303 || (tag == SCB_LIST_NULL)); 7304 } else if (role == ROLE_TARGET) { 7305 match = (group == XPT_FC_GROUP_TMODE) 7306 && ((tag == scb->io_ctx->csio.tag_id) 7307 || (tag == SCB_LIST_NULL)); 7308 } 7309#else /* !AHD_TARGET_MODE */ 7310 match = ((tag == SCB_GET_TAG(scb)) || (tag == SCB_LIST_NULL)); 7311#endif /* AHD_TARGET_MODE */ 7312 } 7313 7314 return match; 7315} 7316 7317void 7318ahd_freeze_devq(struct ahd_softc *ahd, struct scb *scb) 7319{ 7320 int target; 7321 char channel; 7322 int lun; 7323 7324 target = SCB_GET_TARGET(ahd, scb); 7325 lun = SCB_GET_LUN(scb); 7326 channel = SCB_GET_CHANNEL(ahd, scb); 7327 7328 ahd_search_qinfifo(ahd, target, channel, lun, 7329 /*tag*/SCB_LIST_NULL, ROLE_UNKNOWN, 7330 CAM_REQUEUE_REQ, SEARCH_COMPLETE); 7331 7332 ahd_platform_freeze_devq(ahd, scb); 7333} 7334 7335void 7336ahd_qinfifo_requeue_tail(struct ahd_softc *ahd, struct scb *scb) 7337{ 7338 struct scb *prev_scb; 7339 ahd_mode_state saved_modes; 7340 7341 saved_modes = ahd_save_modes(ahd); 7342 ahd_set_modes(ahd, AHD_MODE_CCHAN, AHD_MODE_CCHAN); 7343 prev_scb = NULL; 7344 if (ahd_qinfifo_count(ahd) != 0) { 7345 u_int prev_tag; 7346 u_int prev_pos; 7347 7348 prev_pos = AHD_QIN_WRAP(ahd->qinfifonext - 1); 7349 prev_tag = ahd->qinfifo[prev_pos]; 7350 prev_scb = ahd_lookup_scb(ahd, prev_tag); 7351 } 7352 ahd_qinfifo_requeue(ahd, prev_scb, scb); 7353 ahd_set_hnscb_qoff(ahd, ahd->qinfifonext); 7354 ahd_restore_modes(ahd, saved_modes); 7355} 7356 7357static void 7358ahd_qinfifo_requeue(struct ahd_softc *ahd, struct scb *prev_scb, 7359 struct scb *scb) 7360{ 7361 if (prev_scb == NULL) { 7362 uint32_t busaddr; 7363 7364 busaddr = aic_le32toh(scb->hscb->hscb_busaddr); 7365 ahd_outl(ahd, NEXT_QUEUED_SCB_ADDR, busaddr); 7366 } else { 7367 prev_scb->hscb->next_hscb_busaddr = scb->hscb->hscb_busaddr; 7368 ahd_sync_scb(ahd, prev_scb, 7369 BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE); 7370 } 7371 ahd->qinfifo[AHD_QIN_WRAP(ahd->qinfifonext)] = SCB_GET_TAG(scb); 7372 ahd->qinfifonext++; 7373 scb->hscb->next_hscb_busaddr = ahd->next_queued_hscb->hscb_busaddr; 7374 ahd_sync_scb(ahd, scb, BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE); 7375} 7376 7377static int 7378ahd_qinfifo_count(struct ahd_softc *ahd) 7379{ 7380 u_int qinpos; 7381 u_int wrap_qinpos; 7382 u_int wrap_qinfifonext; 7383 7384 AHD_ASSERT_MODES(ahd, AHD_MODE_CCHAN_MSK, AHD_MODE_CCHAN_MSK); 7385 qinpos = ahd_get_snscb_qoff(ahd); 7386 wrap_qinpos = AHD_QIN_WRAP(qinpos); 7387 wrap_qinfifonext = AHD_QIN_WRAP(ahd->qinfifonext); 7388 if (wrap_qinfifonext >= wrap_qinpos) 7389 return (wrap_qinfifonext - wrap_qinpos); 7390 else 7391 return (wrap_qinfifonext 7392 + NUM_ELEMENTS(ahd->qinfifo) - wrap_qinpos); 7393} 7394 7395void 7396ahd_reset_cmds_pending(struct ahd_softc *ahd) 7397{ 7398 struct scb *scb; 7399 ahd_mode_state saved_modes; 7400 u_int pending_cmds; 7401 7402 saved_modes = ahd_save_modes(ahd); 7403 ahd_set_modes(ahd, AHD_MODE_CCHAN, AHD_MODE_CCHAN); 7404 7405 /* 7406 * Don't count any commands as outstanding that the 7407 * sequencer has already marked for completion. 7408 */ 7409 ahd_flush_qoutfifo(ahd); 7410 7411 pending_cmds = 0; 7412 LIST_FOREACH(scb, &ahd->pending_scbs, pending_links) { 7413 pending_cmds++; 7414 } 7415 ahd_outw(ahd, CMDS_PENDING, pending_cmds - ahd_qinfifo_count(ahd)); 7416 ahd_restore_modes(ahd, saved_modes); 7417 ahd->flags &= ~AHD_UPDATE_PEND_CMDS; 7418} 7419 7420void 7421ahd_done_with_status(struct ahd_softc *ahd, struct scb *scb, uint32_t status) 7422{ 7423 cam_status ostat; 7424 cam_status cstat; 7425 7426 ostat = aic_get_transaction_status(scb); 7427 if (ostat == CAM_REQ_INPROG) 7428 aic_set_transaction_status(scb, status); 7429 cstat = aic_get_transaction_status(scb); 7430 if (cstat != CAM_REQ_CMP) 7431 aic_freeze_scb(scb); 7432 ahd_done(ahd, scb); 7433} 7434 7435int 7436ahd_search_qinfifo(struct ahd_softc *ahd, int target, char channel, 7437 int lun, u_int tag, role_t role, uint32_t status, 7438 ahd_search_action action) 7439{ 7440 struct scb *scb; 7441 struct scb *mk_msg_scb; 7442 struct scb *prev_scb; 7443 ahd_mode_state saved_modes; 7444 u_int qinstart; 7445 u_int qinpos; 7446 u_int qintail; 7447 u_int tid_next; 7448 u_int tid_prev; 7449 u_int scbid; 7450 u_int seq_flags2; 7451 u_int savedscbptr; 7452 uint32_t busaddr; 7453 int found; 7454 int targets; 7455 7456 /* Must be in CCHAN mode */ 7457 saved_modes = ahd_save_modes(ahd); 7458 ahd_set_modes(ahd, AHD_MODE_CCHAN, AHD_MODE_CCHAN); 7459 7460 /* 7461 * Halt any pending SCB DMA. The sequencer will reinitiate 7462 * this dma if the qinfifo is not empty once we unpause. 7463 */ 7464 if ((ahd_inb(ahd, CCSCBCTL) & (CCARREN|CCSCBEN|CCSCBDIR)) 7465 == (CCARREN|CCSCBEN|CCSCBDIR)) { 7466 ahd_outb(ahd, CCSCBCTL, 7467 ahd_inb(ahd, CCSCBCTL) & ~(CCARREN|CCSCBEN)); 7468 while ((ahd_inb(ahd, CCSCBCTL) & (CCARREN|CCSCBEN)) != 0) 7469 ; 7470 } 7471 /* Determine sequencer's position in the qinfifo. */ 7472 qintail = AHD_QIN_WRAP(ahd->qinfifonext); 7473 qinstart = ahd_get_snscb_qoff(ahd); 7474 qinpos = AHD_QIN_WRAP(qinstart); 7475 found = 0; 7476 prev_scb = NULL; 7477 7478 if (action == SEARCH_PRINT) { 7479 printf("qinstart = %d qinfifonext = %d\nQINFIFO:", 7480 qinstart, ahd->qinfifonext); 7481 } 7482 7483 /* 7484 * Start with an empty queue. Entries that are not chosen 7485 * for removal will be re-added to the queue as we go. 7486 */ 7487 ahd->qinfifonext = qinstart; 7488 busaddr = aic_le32toh(ahd->next_queued_hscb->hscb_busaddr); 7489 ahd_outl(ahd, NEXT_QUEUED_SCB_ADDR, busaddr); 7490 7491 while (qinpos != qintail) { 7492 scb = ahd_lookup_scb(ahd, ahd->qinfifo[qinpos]); 7493 if (scb == NULL) { 7494 printf("qinpos = %d, SCB index = %d\n", 7495 qinpos, ahd->qinfifo[qinpos]); 7496 AHD_FATAL_ERROR(ahd); 7497 panic("Loop 1\n"); 7498 } 7499 7500 if (ahd_match_scb(ahd, scb, target, channel, lun, tag, role)) { 7501 /* 7502 * We found an scb that needs to be acted on. 7503 */ 7504 found++; 7505 switch (action) { 7506 case SEARCH_COMPLETE: 7507 if ((scb->flags & SCB_ACTIVE) == 0) 7508 printf("Inactive SCB in qinfifo\n"); 7509 ahd_done_with_status(ahd, scb, status); 7510 /* FALLTHROUGH */ 7511 case SEARCH_REMOVE: 7512 break; 7513 case SEARCH_PRINT: 7514 printf(" 0x%x", ahd->qinfifo[qinpos]); 7515 /* FALLTHROUGH */ 7516 case SEARCH_COUNT: 7517 ahd_qinfifo_requeue(ahd, prev_scb, scb); 7518 prev_scb = scb; 7519 break; 7520 } 7521 } else { 7522 ahd_qinfifo_requeue(ahd, prev_scb, scb); 7523 prev_scb = scb; 7524 } 7525 qinpos = AHD_QIN_WRAP(qinpos+1); 7526 } 7527 7528 ahd_set_hnscb_qoff(ahd, ahd->qinfifonext); 7529 7530 if (action == SEARCH_PRINT) 7531 printf("\nWAITING_TID_QUEUES:\n"); 7532 7533 /* 7534 * Search waiting for selection lists. We traverse the 7535 * list of "their ids" waiting for selection and, if 7536 * appropriate, traverse the SCBs of each "their id" 7537 * looking for matches. 7538 */ 7539 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 7540 seq_flags2 = ahd_inb(ahd, SEQ_FLAGS2); 7541 if ((seq_flags2 & PENDING_MK_MESSAGE) != 0) { 7542 scbid = ahd_inw(ahd, MK_MESSAGE_SCB); 7543 mk_msg_scb = ahd_lookup_scb(ahd, scbid); 7544 } else 7545 mk_msg_scb = NULL; 7546 savedscbptr = ahd_get_scbptr(ahd); 7547 tid_next = ahd_inw(ahd, WAITING_TID_HEAD); 7548 tid_prev = SCB_LIST_NULL; 7549 targets = 0; 7550 for (scbid = tid_next; !SCBID_IS_NULL(scbid); scbid = tid_next) { 7551 u_int tid_head; 7552 u_int tid_tail; 7553 7554 targets++; 7555 if (targets > AHD_NUM_TARGETS) 7556 panic("TID LIST LOOP"); 7557 7558 if (scbid >= ahd->scb_data.numscbs) { 7559 printf("%s: Waiting TID List inconsistency. " 7560 "SCB index == 0x%x, yet numscbs == 0x%x.", 7561 ahd_name(ahd), scbid, ahd->scb_data.numscbs); 7562 ahd_dump_card_state(ahd); 7563 panic("for safety"); 7564 } 7565 scb = ahd_lookup_scb(ahd, scbid); 7566 if (scb == NULL) { 7567 printf("%s: SCB = 0x%x Not Active!\n", 7568 ahd_name(ahd), scbid); 7569 panic("Waiting TID List traversal\n"); 7570 } 7571 ahd_set_scbptr(ahd, scbid); 7572 tid_next = ahd_inw_scbram(ahd, SCB_NEXT2); 7573 if (ahd_match_scb(ahd, scb, target, channel, CAM_LUN_WILDCARD, 7574 SCB_LIST_NULL, ROLE_UNKNOWN) == 0) { 7575 tid_prev = scbid; 7576 continue; 7577 } 7578 7579 /* 7580 * We found a list of scbs that needs to be searched. 7581 */ 7582 if (action == SEARCH_PRINT) 7583 printf(" %d ( ", SCB_GET_TARGET(ahd, scb)); 7584 tid_head = scbid; 7585 found += ahd_search_scb_list(ahd, target, channel, 7586 lun, tag, role, status, 7587 action, &tid_head, &tid_tail, 7588 SCB_GET_TARGET(ahd, scb)); 7589 /* 7590 * Check any MK_MESSAGE SCB that is still waiting to 7591 * enter this target's waiting for selection queue. 7592 */ 7593 if (mk_msg_scb != NULL 7594 && ahd_match_scb(ahd, mk_msg_scb, target, channel, 7595 lun, tag, role)) { 7596 7597 /* 7598 * We found an scb that needs to be acted on. 7599 */ 7600 found++; 7601 switch (action) { 7602 case SEARCH_COMPLETE: 7603 if ((mk_msg_scb->flags & SCB_ACTIVE) == 0) 7604 printf("Inactive SCB pending MK_MSG\n"); 7605 ahd_done_with_status(ahd, mk_msg_scb, status); 7606 /* FALLTHROUGH */ 7607 case SEARCH_REMOVE: 7608 { 7609 u_int tail_offset; 7610 7611 printf("Removing MK_MSG scb\n"); 7612 7613 /* 7614 * Reset our tail to the tail of the 7615 * main per-target list. 7616 */ 7617 tail_offset = WAITING_SCB_TAILS 7618 + (2 * SCB_GET_TARGET(ahd, mk_msg_scb)); 7619 ahd_outw(ahd, tail_offset, tid_tail); 7620 7621 seq_flags2 &= ~PENDING_MK_MESSAGE; 7622 ahd_outb(ahd, SEQ_FLAGS2, seq_flags2); 7623 ahd_outw(ahd, CMDS_PENDING, 7624 ahd_inw(ahd, CMDS_PENDING)-1); 7625 mk_msg_scb = NULL; 7626 break; 7627 } 7628 case SEARCH_PRINT: 7629 printf(" 0x%x", SCB_GET_TAG(scb)); 7630 /* FALLTHROUGH */ 7631 case SEARCH_COUNT: 7632 break; 7633 } 7634 } 7635 7636 if (mk_msg_scb != NULL 7637 && SCBID_IS_NULL(tid_head) 7638 && ahd_match_scb(ahd, scb, target, channel, CAM_LUN_WILDCARD, 7639 SCB_LIST_NULL, ROLE_UNKNOWN)) { 7640 7641 /* 7642 * When removing the last SCB for a target 7643 * queue with a pending MK_MESSAGE scb, we 7644 * must queue the MK_MESSAGE scb. 7645 */ 7646 printf("Queueing mk_msg_scb\n"); 7647 tid_head = ahd_inw(ahd, MK_MESSAGE_SCB); 7648 seq_flags2 &= ~PENDING_MK_MESSAGE; 7649 ahd_outb(ahd, SEQ_FLAGS2, seq_flags2); 7650 mk_msg_scb = NULL; 7651 } 7652 if (tid_head != scbid) 7653 ahd_stitch_tid_list(ahd, tid_prev, tid_head, tid_next); 7654 if (!SCBID_IS_NULL(tid_head)) 7655 tid_prev = tid_head; 7656 if (action == SEARCH_PRINT) 7657 printf(")\n"); 7658 } 7659 7660 /* Restore saved state. */ 7661 ahd_set_scbptr(ahd, savedscbptr); 7662 ahd_restore_modes(ahd, saved_modes); 7663 return (found); 7664} 7665 7666static int 7667ahd_search_scb_list(struct ahd_softc *ahd, int target, char channel, 7668 int lun, u_int tag, role_t role, uint32_t status, 7669 ahd_search_action action, u_int *list_head, 7670 u_int *list_tail, u_int tid) 7671{ 7672 struct scb *scb; 7673 u_int scbid; 7674 u_int next; 7675 u_int prev; 7676 int found; 7677 7678 AHD_ASSERT_MODES(ahd, AHD_MODE_SCSI_MSK, AHD_MODE_SCSI_MSK); 7679 found = 0; 7680 prev = SCB_LIST_NULL; 7681 next = *list_head; 7682 *list_tail = SCB_LIST_NULL; 7683 for (scbid = next; !SCBID_IS_NULL(scbid); scbid = next) { 7684 if (scbid >= ahd->scb_data.numscbs) { 7685 printf("%s:SCB List inconsistency. " 7686 "SCB == 0x%x, yet numscbs == 0x%x.", 7687 ahd_name(ahd), scbid, ahd->scb_data.numscbs); 7688 ahd_dump_card_state(ahd); 7689 panic("for safety"); 7690 } 7691 scb = ahd_lookup_scb(ahd, scbid); 7692 if (scb == NULL) { 7693 printf("%s: SCB = %d Not Active!\n", 7694 ahd_name(ahd), scbid); 7695 panic("Waiting List traversal\n"); 7696 } 7697 ahd_set_scbptr(ahd, scbid); 7698 *list_tail = scbid; 7699 next = ahd_inw_scbram(ahd, SCB_NEXT); 7700 if (ahd_match_scb(ahd, scb, target, channel, 7701 lun, SCB_LIST_NULL, role) == 0) { 7702 prev = scbid; 7703 continue; 7704 } 7705 found++; 7706 switch (action) { 7707 case SEARCH_COMPLETE: 7708 if ((scb->flags & SCB_ACTIVE) == 0) 7709 printf("Inactive SCB in Waiting List\n"); 7710 ahd_done_with_status(ahd, scb, status); 7711 /* FALLTHROUGH */ 7712 case SEARCH_REMOVE: 7713 ahd_rem_wscb(ahd, scbid, prev, next, tid); 7714 *list_tail = prev; 7715 if (SCBID_IS_NULL(prev)) 7716 *list_head = next; 7717 break; 7718 case SEARCH_PRINT: 7719 printf("0x%x ", scbid); 7720 case SEARCH_COUNT: 7721 prev = scbid; 7722 break; 7723 } 7724 if (found > AHD_SCB_MAX) 7725 panic("SCB LIST LOOP"); 7726 } 7727 if (action == SEARCH_COMPLETE 7728 || action == SEARCH_REMOVE) 7729 ahd_outw(ahd, CMDS_PENDING, ahd_inw(ahd, CMDS_PENDING) - found); 7730 return (found); 7731} 7732 7733static void 7734ahd_stitch_tid_list(struct ahd_softc *ahd, u_int tid_prev, 7735 u_int tid_cur, u_int tid_next) 7736{ 7737 AHD_ASSERT_MODES(ahd, AHD_MODE_SCSI_MSK, AHD_MODE_SCSI_MSK); 7738 7739 if (SCBID_IS_NULL(tid_cur)) { 7740 7741 /* Bypass current TID list */ 7742 if (SCBID_IS_NULL(tid_prev)) { 7743 ahd_outw(ahd, WAITING_TID_HEAD, tid_next); 7744 } else { 7745 ahd_set_scbptr(ahd, tid_prev); 7746 ahd_outw(ahd, SCB_NEXT2, tid_next); 7747 } 7748 if (SCBID_IS_NULL(tid_next)) 7749 ahd_outw(ahd, WAITING_TID_TAIL, tid_prev); 7750 } else { 7751 7752 /* Stitch through tid_cur */ 7753 if (SCBID_IS_NULL(tid_prev)) { 7754 ahd_outw(ahd, WAITING_TID_HEAD, tid_cur); 7755 } else { 7756 ahd_set_scbptr(ahd, tid_prev); 7757 ahd_outw(ahd, SCB_NEXT2, tid_cur); 7758 } 7759 ahd_set_scbptr(ahd, tid_cur); 7760 ahd_outw(ahd, SCB_NEXT2, tid_next); 7761 7762 if (SCBID_IS_NULL(tid_next)) 7763 ahd_outw(ahd, WAITING_TID_TAIL, tid_cur); 7764 } 7765} 7766 7767/* 7768 * Manipulate the waiting for selection list and return the 7769 * scb that follows the one that we remove. 7770 */ 7771static u_int 7772ahd_rem_wscb(struct ahd_softc *ahd, u_int scbid, 7773 u_int prev, u_int next, u_int tid) 7774{ 7775 u_int tail_offset; 7776 7777 AHD_ASSERT_MODES(ahd, AHD_MODE_SCSI_MSK, AHD_MODE_SCSI_MSK); 7778 if (!SCBID_IS_NULL(prev)) { 7779 ahd_set_scbptr(ahd, prev); 7780 ahd_outw(ahd, SCB_NEXT, next); 7781 } 7782 7783 /* 7784 * SCBs that have MK_MESSAGE set in them may 7785 * cause the tail pointer to be updated without 7786 * setting the next pointer of the previous tail. 7787 * Only clear the tail if the removed SCB was 7788 * the tail. 7789 */ 7790 tail_offset = WAITING_SCB_TAILS + (2 * tid); 7791 if (SCBID_IS_NULL(next) 7792 && ahd_inw(ahd, tail_offset) == scbid) 7793 ahd_outw(ahd, tail_offset, prev); 7794 7795 ahd_add_scb_to_free_list(ahd, scbid); 7796 return (next); 7797} 7798 7799/* 7800 * Add the SCB as selected by SCBPTR onto the on chip list of 7801 * free hardware SCBs. This list is empty/unused if we are not 7802 * performing SCB paging. 7803 */ 7804static void 7805ahd_add_scb_to_free_list(struct ahd_softc *ahd, u_int scbid) 7806{ 7807/* XXX Need some other mechanism to designate "free". */ 7808 /* 7809 * Invalidate the tag so that our abort 7810 * routines don't think it's active. 7811 ahd_outb(ahd, SCB_TAG, SCB_LIST_NULL); 7812 */ 7813} 7814 7815/******************************** Error Handling ******************************/ 7816/* 7817 * Abort all SCBs that match the given description (target/channel/lun/tag), 7818 * setting their status to the passed in status if the status has not already 7819 * been modified from CAM_REQ_INPROG. This routine assumes that the sequencer 7820 * is paused before it is called. 7821 */ 7822int 7823ahd_abort_scbs(struct ahd_softc *ahd, int target, char channel, 7824 int lun, u_int tag, role_t role, uint32_t status) 7825{ 7826 struct scb *scbp; 7827 struct scb *scbp_next; 7828 u_int i, j; 7829 u_int maxtarget; 7830 u_int minlun; 7831 u_int maxlun; 7832 int found; 7833 ahd_mode_state saved_modes; 7834 7835 /* restore this when we're done */ 7836 saved_modes = ahd_save_modes(ahd); 7837 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 7838 7839 found = ahd_search_qinfifo(ahd, target, channel, lun, SCB_LIST_NULL, 7840 role, CAM_REQUEUE_REQ, SEARCH_COMPLETE); 7841 7842 /* 7843 * Clean out the busy target table for any untagged commands. 7844 */ 7845 i = 0; 7846 maxtarget = 16; 7847 if (target != CAM_TARGET_WILDCARD) { 7848 i = target; 7849 if (channel == 'B') 7850 i += 8; 7851 maxtarget = i + 1; 7852 } 7853 7854 if (lun == CAM_LUN_WILDCARD) { 7855 minlun = 0; 7856 maxlun = AHD_NUM_LUNS_NONPKT; 7857 } else if (lun >= AHD_NUM_LUNS_NONPKT) { 7858 minlun = maxlun = 0; 7859 } else { 7860 minlun = lun; 7861 maxlun = lun + 1; 7862 } 7863 7864 if (role != ROLE_TARGET) { 7865 for (;i < maxtarget; i++) { 7866 for (j = minlun;j < maxlun; j++) { 7867 u_int scbid; 7868 u_int tcl; 7869 7870 tcl = BUILD_TCL_RAW(i, 'A', j); 7871 scbid = ahd_find_busy_tcl(ahd, tcl); 7872 scbp = ahd_lookup_scb(ahd, scbid); 7873 if (scbp == NULL 7874 || ahd_match_scb(ahd, scbp, target, channel, 7875 lun, tag, role) == 0) 7876 continue; 7877 ahd_unbusy_tcl(ahd, BUILD_TCL_RAW(i, 'A', j)); 7878 } 7879 } 7880 } 7881 7882 /* 7883 * Don't abort commands that have already completed, 7884 * but haven't quite made it up to the host yet. 7885 */ 7886 ahd_flush_qoutfifo(ahd); 7887 7888 /* 7889 * Go through the pending CCB list and look for 7890 * commands for this target that are still active. 7891 * These are other tagged commands that were 7892 * disconnected when the reset occurred. 7893 */ 7894 scbp_next = LIST_FIRST(&ahd->pending_scbs); 7895 while (scbp_next != NULL) { 7896 scbp = scbp_next; 7897 scbp_next = LIST_NEXT(scbp, pending_links); 7898 if (ahd_match_scb(ahd, scbp, target, channel, lun, tag, role)) { 7899 cam_status ostat; 7900 7901 ostat = aic_get_transaction_status(scbp); 7902 if (ostat == CAM_REQ_INPROG) 7903 aic_set_transaction_status(scbp, status); 7904 if (aic_get_transaction_status(scbp) != CAM_REQ_CMP) 7905 aic_freeze_scb(scbp); 7906 if ((scbp->flags & SCB_ACTIVE) == 0) 7907 printf("Inactive SCB on pending list\n"); 7908 ahd_done(ahd, scbp); 7909 found++; 7910 } 7911 } 7912 ahd_restore_modes(ahd, saved_modes); 7913 ahd_platform_abort_scbs(ahd, target, channel, lun, tag, role, status); 7914 ahd->flags |= AHD_UPDATE_PEND_CMDS; 7915 return found; 7916} 7917 7918static void 7919ahd_reset_current_bus(struct ahd_softc *ahd) 7920{ 7921 uint8_t scsiseq; 7922 7923 AHD_ASSERT_MODES(ahd, AHD_MODE_SCSI_MSK, AHD_MODE_SCSI_MSK); 7924 ahd_outb(ahd, SIMODE1, ahd_inb(ahd, SIMODE1) & ~ENSCSIRST); 7925 scsiseq = ahd_inb(ahd, SCSISEQ0) & ~(ENSELO|ENARBO|SCSIRSTO); 7926 ahd_outb(ahd, SCSISEQ0, scsiseq | SCSIRSTO); 7927 ahd_flush_device_writes(ahd); 7928 aic_delay(AHD_BUSRESET_DELAY); 7929 /* Turn off the bus reset */ 7930 ahd_outb(ahd, SCSISEQ0, scsiseq); 7931 ahd_flush_device_writes(ahd); 7932 aic_delay(AHD_BUSRESET_DELAY); 7933 if ((ahd->bugs & AHD_SCSIRST_BUG) != 0) { 7934 /* 7935 * 2A Razor #474 7936 * Certain chip state is not cleared for 7937 * SCSI bus resets that we initiate, so 7938 * we must reset the chip. 7939 */ 7940 ahd_reset(ahd, /*reinit*/TRUE); 7941 ahd_intr_enable(ahd, /*enable*/TRUE); 7942 AHD_ASSERT_MODES(ahd, AHD_MODE_SCSI_MSK, AHD_MODE_SCSI_MSK); 7943 } 7944 7945 ahd_clear_intstat(ahd); 7946} 7947 7948int 7949ahd_reset_channel(struct ahd_softc *ahd, char channel, int initiate_reset) 7950{ 7951 struct ahd_devinfo devinfo; 7952 u_int initiator; 7953 u_int target; 7954 u_int max_scsiid; 7955 int found; 7956 u_int fifo; 7957 u_int next_fifo; 7958 7959 ahd->pending_device = NULL; 7960 7961 ahd_compile_devinfo(&devinfo, 7962 CAM_TARGET_WILDCARD, 7963 CAM_TARGET_WILDCARD, 7964 CAM_LUN_WILDCARD, 7965 channel, ROLE_UNKNOWN); 7966 ahd_pause(ahd); 7967 7968 /* Make sure the sequencer is in a safe location. */ 7969 ahd_clear_critical_section(ahd); 7970 7971#ifdef AHD_TARGET_MODE 7972 if ((ahd->flags & AHD_TARGETROLE) != 0) { 7973 ahd_run_tqinfifo(ahd, /*paused*/TRUE); 7974 } 7975#endif 7976 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 7977 7978 /* 7979 * Disable selections so no automatic hardware 7980 * functions will modify chip state. 7981 */ 7982 ahd_outb(ahd, SCSISEQ0, 0); 7983 ahd_outb(ahd, SCSISEQ1, 0); 7984 7985 /* 7986 * Safely shut down our DMA engines. Always start with 7987 * the FIFO that is not currently active (if any are 7988 * actively connected). 7989 */ 7990 next_fifo = fifo = ahd_inb(ahd, DFFSTAT) & CURRFIFO; 7991 if (next_fifo > CURRFIFO_1) 7992 /* If disconneced, arbitrarily start with FIFO1. */ 7993 next_fifo = fifo = 0; 7994 do { 7995 next_fifo ^= CURRFIFO_1; 7996 ahd_set_modes(ahd, next_fifo, next_fifo); 7997 ahd_outb(ahd, DFCNTRL, 7998 ahd_inb(ahd, DFCNTRL) & ~(SCSIEN|HDMAEN)); 7999 while ((ahd_inb(ahd, DFCNTRL) & HDMAENACK) != 0) 8000 aic_delay(10); 8001 /* 8002 * Set CURRFIFO to the now inactive channel. 8003 */ 8004 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 8005 ahd_outb(ahd, DFFSTAT, next_fifo); 8006 } while (next_fifo != fifo); 8007 8008 /* 8009 * Reset the bus if we are initiating this reset 8010 */ 8011 ahd_clear_msg_state(ahd); 8012 ahd_outb(ahd, SIMODE1, 8013 ahd_inb(ahd, SIMODE1) & ~(ENBUSFREE|ENSCSIRST)); 8014 8015 if (initiate_reset) 8016 ahd_reset_current_bus(ahd); 8017 8018 ahd_clear_intstat(ahd); 8019 8020 /* 8021 * Clean up all the state information for the 8022 * pending transactions on this bus. 8023 */ 8024 found = ahd_abort_scbs(ahd, CAM_TARGET_WILDCARD, channel, 8025 CAM_LUN_WILDCARD, SCB_LIST_NULL, 8026 ROLE_UNKNOWN, CAM_SCSI_BUS_RESET); 8027 8028 /* 8029 * Cleanup anything left in the FIFOs. 8030 */ 8031 ahd_clear_fifo(ahd, 0); 8032 ahd_clear_fifo(ahd, 1); 8033 8034 /* 8035 * Revert to async/narrow transfers until we renegotiate. 8036 */ 8037 max_scsiid = (ahd->features & AHD_WIDE) ? 15 : 7; 8038 for (target = 0; target <= max_scsiid; target++) { 8039 8040 if (ahd->enabled_targets[target] == NULL) 8041 continue; 8042 for (initiator = 0; initiator <= max_scsiid; initiator++) { 8043 struct ahd_devinfo devinfo; 8044 8045 ahd_compile_devinfo(&devinfo, target, initiator, 8046 CAM_LUN_WILDCARD, 8047 'A', ROLE_UNKNOWN); 8048 ahd_set_width(ahd, &devinfo, MSG_EXT_WDTR_BUS_8_BIT, 8049 AHD_TRANS_CUR, /*paused*/TRUE); 8050 ahd_set_syncrate(ahd, &devinfo, /*period*/0, 8051 /*offset*/0, /*ppr_options*/0, 8052 AHD_TRANS_CUR, /*paused*/TRUE); 8053 } 8054 } 8055 8056#ifdef AHD_TARGET_MODE 8057 max_scsiid = (ahd->features & AHD_WIDE) ? 15 : 7; 8058 8059 /* 8060 * Send an immediate notify ccb to all target more peripheral 8061 * drivers affected by this action. 8062 */ 8063 for (target = 0; target <= max_scsiid; target++) { 8064 struct ahd_tmode_tstate* tstate; 8065 u_int lun; 8066 8067 tstate = ahd->enabled_targets[target]; 8068 if (tstate == NULL) 8069 continue; 8070 for (lun = 0; lun < AHD_NUM_LUNS; lun++) { 8071 struct ahd_tmode_lstate* lstate; 8072 8073 lstate = tstate->enabled_luns[lun]; 8074 if (lstate == NULL) 8075 continue; 8076 8077 ahd_queue_lstate_event(ahd, lstate, CAM_TARGET_WILDCARD, 8078 EVENT_TYPE_BUS_RESET, /*arg*/0); 8079 ahd_send_lstate_events(ahd, lstate); 8080 } 8081 } 8082#endif 8083 /* Notify the XPT that a bus reset occurred */ 8084 ahd_send_async(ahd, devinfo.channel, CAM_TARGET_WILDCARD, 8085 CAM_LUN_WILDCARD, AC_BUS_RESET, NULL); 8086 ahd_restart(ahd); 8087 /* 8088 * Freeze the SIMQ until our poller can determine that 8089 * the bus reset has really gone away. We set the initial 8090 * timer to 0 to have the check performed as soon as possible 8091 * from the timer context. 8092 */ 8093 if ((ahd->flags & AHD_RESET_POLL_ACTIVE) == 0) { 8094 ahd->flags |= AHD_RESET_POLL_ACTIVE; 8095 aic_freeze_simq(ahd); 8096 aic_timer_reset(&ahd->reset_timer, 0, ahd_reset_poll, ahd); 8097 } 8098 return (found); 8099} 8100 8101 8102#define AHD_RESET_POLL_MS 1 8103static void 8104ahd_reset_poll(void *arg) 8105{ 8106 struct ahd_softc *ahd = (struct ahd_softc *)arg; 8107 u_int scsiseq1; 8108 8109 ahd_lock(ahd); 8110 ahd_pause(ahd); 8111 ahd_update_modes(ahd); 8112 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 8113 ahd_outb(ahd, CLRSINT1, CLRSCSIRSTI); 8114 if ((ahd_inb(ahd, SSTAT1) & SCSIRSTI) != 0) { 8115 aic_timer_reset(&ahd->reset_timer, AHD_RESET_POLL_MS, 8116 ahd_reset_poll, ahd); 8117 ahd_unpause(ahd); 8118 ahd_unlock(ahd); 8119 return; 8120 } 8121 8122 /* Reset is now low. Complete chip reinitialization. */ 8123 ahd_outb(ahd, SIMODE1, ahd_inb(ahd, SIMODE1) | ENSCSIRST); 8124 scsiseq1 = ahd_inb(ahd, SCSISEQ_TEMPLATE); 8125 ahd_outb(ahd, SCSISEQ1, scsiseq1 & (ENSELI|ENRSELI|ENAUTOATNP)); 8126 ahd_unpause(ahd); 8127 ahd->flags &= ~AHD_RESET_POLL_ACTIVE; 8128 aic_release_simq(ahd); 8129 ahd_unlock(ahd); 8130} 8131 8132/**************************** Statistics Processing ***************************/ 8133static void 8134ahd_stat_timer(void *arg) 8135{ 8136 struct ahd_softc *ahd = (struct ahd_softc *)arg; 8137 int enint_coal; 8138 8139 ahd_lock(ahd); 8140 enint_coal = ahd->hs_mailbox & ENINT_COALESCE; 8141 if (ahd->cmdcmplt_total > ahd->int_coalescing_threshold) 8142 enint_coal |= ENINT_COALESCE; 8143 else if (ahd->cmdcmplt_total < ahd->int_coalescing_stop_threshold) 8144 enint_coal &= ~ENINT_COALESCE; 8145 8146 if (enint_coal != (ahd->hs_mailbox & ENINT_COALESCE)) { 8147 ahd_enable_coalescing(ahd, enint_coal); 8148#ifdef AHD_DEBUG 8149 if ((ahd_debug & AHD_SHOW_INT_COALESCING) != 0) 8150 printf("%s: Interrupt coalescing " 8151 "now %sabled. Cmds %d\n", 8152 ahd_name(ahd), 8153 (enint_coal & ENINT_COALESCE) ? "en" : "dis", 8154 ahd->cmdcmplt_total); 8155#endif 8156 } 8157 8158 ahd->cmdcmplt_bucket = (ahd->cmdcmplt_bucket+1) & (AHD_STAT_BUCKETS-1); 8159 ahd->cmdcmplt_total -= ahd->cmdcmplt_counts[ahd->cmdcmplt_bucket]; 8160 ahd->cmdcmplt_counts[ahd->cmdcmplt_bucket] = 0; 8161 aic_timer_reset(&ahd->stat_timer, AHD_STAT_UPDATE_MS, 8162 ahd_stat_timer, ahd); 8163 ahd_unlock(ahd); 8164} 8165 8166/****************************** Status Processing *****************************/ 8167void 8168ahd_handle_scb_status(struct ahd_softc *ahd, struct scb *scb) 8169{ 8170 if (scb->hscb->shared_data.istatus.scsi_status != 0) { 8171 ahd_handle_scsi_status(ahd, scb); 8172 } else { 8173 ahd_calc_residual(ahd, scb); 8174 ahd_done(ahd, scb); 8175 } 8176} 8177 8178void 8179ahd_handle_scsi_status(struct ahd_softc *ahd, struct scb *scb) 8180{ 8181 struct hardware_scb *hscb; 8182 int paused; 8183 8184 /* 8185 * The sequencer freezes its select-out queue 8186 * anytime a SCSI status error occurs. We must 8187 * handle the error and increment our qfreeze count 8188 * to allow the sequencer to continue. We don't 8189 * bother clearing critical sections here since all 8190 * operations are on data structures that the sequencer 8191 * is not touching once the queue is frozen. 8192 */ 8193 hscb = scb->hscb; 8194 8195 if (ahd_is_paused(ahd)) { 8196 paused = 1; 8197 } else { 8198 paused = 0; 8199 ahd_pause(ahd); 8200 } 8201 8202 /* Freeze the queue until the client sees the error. */ 8203 ahd_freeze_devq(ahd, scb); 8204 aic_freeze_scb(scb); 8205 ahd->qfreeze_cnt++; 8206 ahd_outw(ahd, KERNEL_QFREEZE_COUNT, ahd->qfreeze_cnt); 8207 8208 if (paused == 0) 8209 ahd_unpause(ahd); 8210 8211 /* Don't want to clobber the original sense code */ 8212 if ((scb->flags & SCB_SENSE) != 0) { 8213 /* 8214 * Clear the SCB_SENSE Flag and perform 8215 * a normal command completion. 8216 */ 8217 scb->flags &= ~SCB_SENSE; 8218 aic_set_transaction_status(scb, CAM_AUTOSENSE_FAIL); 8219 ahd_done(ahd, scb); 8220 return; 8221 } 8222 aic_set_transaction_status(scb, CAM_SCSI_STATUS_ERROR); 8223 aic_set_scsi_status(scb, hscb->shared_data.istatus.scsi_status); 8224 switch (hscb->shared_data.istatus.scsi_status) { 8225 case STATUS_PKT_SENSE: 8226 { 8227 struct scsi_status_iu_header *siu; 8228 8229 ahd_sync_sense(ahd, scb, BUS_DMASYNC_POSTREAD); 8230 siu = (struct scsi_status_iu_header *)scb->sense_data; 8231 aic_set_scsi_status(scb, siu->status); 8232#ifdef AHD_DEBUG 8233 if ((ahd_debug & AHD_SHOW_SENSE) != 0) { 8234 ahd_print_path(ahd, scb); 8235 printf("SCB 0x%x Received PKT Status of 0x%x\n", 8236 SCB_GET_TAG(scb), siu->status); 8237 printf("\tflags = 0x%x, sense len = 0x%x, " 8238 "pktfail = 0x%x\n", 8239 siu->flags, scsi_4btoul(siu->sense_length), 8240 scsi_4btoul(siu->pkt_failures_length)); 8241 } 8242#endif 8243 if ((siu->flags & SIU_RSPVALID) != 0) { 8244 ahd_print_path(ahd, scb); 8245 if (scsi_4btoul(siu->pkt_failures_length) < 4) { 8246 printf("Unable to parse pkt_failures\n"); 8247 } else { 8248 8249 switch (SIU_PKTFAIL_CODE(siu)) { 8250 case SIU_PFC_NONE: 8251 printf("No packet failure found\n"); 8252 AHD_UNCORRECTABLE_ERROR(ahd); 8253 break; 8254 case SIU_PFC_CIU_FIELDS_INVALID: 8255 printf("Invalid Command IU Field\n"); 8256 AHD_UNCORRECTABLE_ERROR(ahd); 8257 break; 8258 case SIU_PFC_TMF_NOT_SUPPORTED: 8259 printf("TMF not supportd\n"); 8260 AHD_UNCORRECTABLE_ERROR(ahd); 8261 break; 8262 case SIU_PFC_TMF_FAILED: 8263 printf("TMF failed\n"); 8264 AHD_UNCORRECTABLE_ERROR(ahd); 8265 break; 8266 case SIU_PFC_INVALID_TYPE_CODE: 8267 printf("Invalid L_Q Type code\n"); 8268 AHD_UNCORRECTABLE_ERROR(ahd); 8269 break; 8270 case SIU_PFC_ILLEGAL_REQUEST: 8271 AHD_UNCORRECTABLE_ERROR(ahd); 8272 printf("Illegal request\n"); 8273 default: 8274 break; 8275 } 8276 } 8277 if (siu->status == SCSI_STATUS_OK) 8278 aic_set_transaction_status(scb, 8279 CAM_REQ_CMP_ERR); 8280 } 8281 if ((siu->flags & SIU_SNSVALID) != 0) { 8282 scb->flags |= SCB_PKT_SENSE; 8283#ifdef AHD_DEBUG 8284 if ((ahd_debug & AHD_SHOW_SENSE) != 0) 8285 printf("Sense data available\n"); 8286#endif 8287 } 8288 ahd_done(ahd, scb); 8289 break; 8290 } 8291 case SCSI_STATUS_CMD_TERMINATED: 8292 case SCSI_STATUS_CHECK_COND: 8293 { 8294 struct ahd_devinfo devinfo; 8295 struct ahd_dma_seg *sg; 8296 struct scsi_sense *sc; 8297 struct ahd_initiator_tinfo *targ_info; 8298 struct ahd_tmode_tstate *tstate; 8299 struct ahd_transinfo *tinfo; 8300#ifdef AHD_DEBUG 8301 if (ahd_debug & AHD_SHOW_SENSE) { 8302 ahd_print_path(ahd, scb); 8303 printf("SCB %d: requests Check Status\n", 8304 SCB_GET_TAG(scb)); 8305 } 8306#endif 8307 8308 if (aic_perform_autosense(scb) == 0) 8309 break; 8310 8311 ahd_compile_devinfo(&devinfo, SCB_GET_OUR_ID(scb), 8312 SCB_GET_TARGET(ahd, scb), 8313 SCB_GET_LUN(scb), 8314 SCB_GET_CHANNEL(ahd, scb), 8315 ROLE_INITIATOR); 8316 targ_info = ahd_fetch_transinfo(ahd, 8317 devinfo.channel, 8318 devinfo.our_scsiid, 8319 devinfo.target, 8320 &tstate); 8321 tinfo = &targ_info->curr; 8322 sg = scb->sg_list; 8323 sc = (struct scsi_sense *)hscb->shared_data.idata.cdb; 8324 /* 8325 * Save off the residual if there is one. 8326 */ 8327 ahd_update_residual(ahd, scb); 8328#ifdef AHD_DEBUG 8329 if (ahd_debug & AHD_SHOW_SENSE) { 8330 ahd_print_path(ahd, scb); 8331 printf("Sending Sense\n"); 8332 } 8333#endif 8334 scb->sg_count = 0; 8335 sg = ahd_sg_setup(ahd, scb, sg, ahd_get_sense_bufaddr(ahd, scb), 8336 aic_get_sense_bufsize(ahd, scb), 8337 /*last*/TRUE); 8338 sc->opcode = REQUEST_SENSE; 8339 sc->byte2 = 0; 8340 if (tinfo->protocol_version <= SCSI_REV_2 8341 && SCB_GET_LUN(scb) < 8) 8342 sc->byte2 = SCB_GET_LUN(scb) << 5; 8343 sc->unused[0] = 0; 8344 sc->unused[1] = 0; 8345 sc->length = aic_get_sense_bufsize(ahd, scb); 8346 sc->control = 0; 8347 8348 /* 8349 * We can't allow the target to disconnect. 8350 * This will be an untagged transaction and 8351 * having the target disconnect will make this 8352 * transaction indestinguishable from outstanding 8353 * tagged transactions. 8354 */ 8355 hscb->control = 0; 8356 8357 /* 8358 * This request sense could be because the 8359 * the device lost power or in some other 8360 * way has lost our transfer negotiations. 8361 * Renegotiate if appropriate. Unit attention 8362 * errors will be reported before any data 8363 * phases occur. 8364 */ 8365 if (aic_get_residual(scb) == aic_get_transfer_length(scb)) { 8366 ahd_update_neg_request(ahd, &devinfo, 8367 tstate, targ_info, 8368 AHD_NEG_IF_NON_ASYNC); 8369 } 8370 if (tstate->auto_negotiate & devinfo.target_mask) { 8371 hscb->control |= MK_MESSAGE; 8372 scb->flags &= 8373 ~(SCB_NEGOTIATE|SCB_ABORT|SCB_DEVICE_RESET); 8374 scb->flags |= SCB_AUTO_NEGOTIATE; 8375 } 8376 hscb->cdb_len = sizeof(*sc); 8377 ahd_setup_data_scb(ahd, scb); 8378 scb->flags |= SCB_SENSE; 8379 ahd_queue_scb(ahd, scb); 8380 /* 8381 * Ensure we have enough time to actually 8382 * retrieve the sense, but only schedule 8383 * the timer if we are not in recovery or 8384 * this is a recovery SCB that is allowed 8385 * to have an active timer. 8386 */ 8387 if (ahd->scb_data.recovery_scbs == 0 8388 || (scb->flags & SCB_RECOVERY_SCB) != 0) 8389 aic_scb_timer_reset(scb, 5 * 1000); 8390 break; 8391 } 8392 case SCSI_STATUS_OK: 8393 printf("%s: Interrupted for staus of 0???\n", 8394 ahd_name(ahd)); 8395 /* FALLTHROUGH */ 8396 default: 8397 ahd_done(ahd, scb); 8398 break; 8399 } 8400} 8401 8402/* 8403 * Calculate the residual for a just completed SCB. 8404 */ 8405void 8406ahd_calc_residual(struct ahd_softc *ahd, struct scb *scb) 8407{ 8408 struct hardware_scb *hscb; 8409 struct initiator_status *spkt; 8410 uint32_t sgptr; 8411 uint32_t resid_sgptr; 8412 uint32_t resid; 8413 8414 /* 8415 * 5 cases. 8416 * 1) No residual. 8417 * SG_STATUS_VALID clear in sgptr. 8418 * 2) Transferless command 8419 * 3) Never performed any transfers. 8420 * sgptr has SG_FULL_RESID set. 8421 * 4) No residual but target did not 8422 * save data pointers after the 8423 * last transfer, so sgptr was 8424 * never updated. 8425 * 5) We have a partial residual. 8426 * Use residual_sgptr to determine 8427 * where we are. 8428 */ 8429 8430 hscb = scb->hscb; 8431 sgptr = aic_le32toh(hscb->sgptr); 8432 if ((sgptr & SG_STATUS_VALID) == 0) 8433 /* Case 1 */ 8434 return; 8435 sgptr &= ~SG_STATUS_VALID; 8436 8437 if ((sgptr & SG_LIST_NULL) != 0) 8438 /* Case 2 */ 8439 return; 8440 8441 /* 8442 * Residual fields are the same in both 8443 * target and initiator status packets, 8444 * so we can always use the initiator fields 8445 * regardless of the role for this SCB. 8446 */ 8447 spkt = &hscb->shared_data.istatus; 8448 resid_sgptr = aic_le32toh(spkt->residual_sgptr); 8449 if ((sgptr & SG_FULL_RESID) != 0) { 8450 /* Case 3 */ 8451 resid = aic_get_transfer_length(scb); 8452 } else if ((resid_sgptr & SG_LIST_NULL) != 0) { 8453 /* Case 4 */ 8454 return; 8455 } else if ((resid_sgptr & SG_OVERRUN_RESID) != 0) { 8456 ahd_print_path(ahd, scb); 8457 printf("data overrun detected Tag == 0x%x.\n", 8458 SCB_GET_TAG(scb)); 8459 ahd_freeze_devq(ahd, scb); 8460 aic_set_transaction_status(scb, CAM_DATA_RUN_ERR); 8461 aic_freeze_scb(scb); 8462 return; 8463 } else if ((resid_sgptr & ~SG_PTR_MASK) != 0) { 8464 panic("Bogus resid sgptr value 0x%x\n", resid_sgptr); 8465 /* NOTREACHED */ 8466 } else { 8467 struct ahd_dma_seg *sg; 8468 8469 /* 8470 * Remainder of the SG where the transfer 8471 * stopped. 8472 */ 8473 resid = aic_le32toh(spkt->residual_datacnt) & AHD_SG_LEN_MASK; 8474 sg = ahd_sg_bus_to_virt(ahd, scb, resid_sgptr & SG_PTR_MASK); 8475 8476 /* The residual sg_ptr always points to the next sg */ 8477 sg--; 8478 8479 /* 8480 * Add up the contents of all residual 8481 * SG segments that are after the SG where 8482 * the transfer stopped. 8483 */ 8484 while ((aic_le32toh(sg->len) & AHD_DMA_LAST_SEG) == 0) { 8485 sg++; 8486 resid += aic_le32toh(sg->len) & AHD_SG_LEN_MASK; 8487 } 8488 } 8489 if ((scb->flags & SCB_SENSE) == 0) 8490 aic_set_residual(scb, resid); 8491 else 8492 aic_set_sense_residual(scb, resid); 8493 8494#ifdef AHD_DEBUG 8495 if ((ahd_debug & AHD_SHOW_MISC) != 0) { 8496 ahd_print_path(ahd, scb); 8497 printf("Handled %sResidual of %d bytes\n", 8498 (scb->flags & SCB_SENSE) ? "Sense " : "", resid); 8499 } 8500#endif 8501} 8502 8503/******************************* Target Mode **********************************/ 8504#ifdef AHD_TARGET_MODE 8505/* 8506 * Add a target mode event to this lun's queue 8507 */ 8508static void 8509ahd_queue_lstate_event(struct ahd_softc *ahd, struct ahd_tmode_lstate *lstate, 8510 u_int initiator_id, u_int event_type, u_int event_arg) 8511{ 8512 struct ahd_tmode_event *event; 8513 int pending; 8514 8515 xpt_freeze_devq(lstate->path, /*count*/1); 8516 if (lstate->event_w_idx >= lstate->event_r_idx) 8517 pending = lstate->event_w_idx - lstate->event_r_idx; 8518 else 8519 pending = AHD_TMODE_EVENT_BUFFER_SIZE + 1 8520 - (lstate->event_r_idx - lstate->event_w_idx); 8521 8522 if (event_type == EVENT_TYPE_BUS_RESET 8523 || event_type == MSG_BUS_DEV_RESET) { 8524 /* 8525 * Any earlier events are irrelevant, so reset our buffer. 8526 * This has the effect of allowing us to deal with reset 8527 * floods (an external device holding down the reset line) 8528 * without losing the event that is really interesting. 8529 */ 8530 lstate->event_r_idx = 0; 8531 lstate->event_w_idx = 0; 8532 xpt_release_devq(lstate->path, pending, /*runqueue*/FALSE); 8533 } 8534 8535 if (pending == AHD_TMODE_EVENT_BUFFER_SIZE) { 8536 xpt_print_path(lstate->path); 8537 printf("immediate event %x:%x lost\n", 8538 lstate->event_buffer[lstate->event_r_idx].event_type, 8539 lstate->event_buffer[lstate->event_r_idx].event_arg); 8540 lstate->event_r_idx++; 8541 if (lstate->event_r_idx == AHD_TMODE_EVENT_BUFFER_SIZE) 8542 lstate->event_r_idx = 0; 8543 xpt_release_devq(lstate->path, /*count*/1, /*runqueue*/FALSE); 8544 } 8545 8546 event = &lstate->event_buffer[lstate->event_w_idx]; 8547 event->initiator_id = initiator_id; 8548 event->event_type = event_type; 8549 event->event_arg = event_arg; 8550 lstate->event_w_idx++; 8551 if (lstate->event_w_idx == AHD_TMODE_EVENT_BUFFER_SIZE) 8552 lstate->event_w_idx = 0; 8553} 8554 8555/* 8556 * Send any target mode events queued up waiting 8557 * for immediate notify resources. 8558 */ 8559void 8560ahd_send_lstate_events(struct ahd_softc *ahd, struct ahd_tmode_lstate *lstate) 8561{ 8562 struct ccb_hdr *ccbh; 8563 struct ccb_immediate_notify *inot; 8564 8565 while (lstate->event_r_idx != lstate->event_w_idx 8566 && (ccbh = SLIST_FIRST(&lstate->immed_notifies)) != NULL) { 8567 struct ahd_tmode_event *event; 8568 8569 event = &lstate->event_buffer[lstate->event_r_idx]; 8570 SLIST_REMOVE_HEAD(&lstate->immed_notifies, sim_links.sle); 8571 inot = (struct ccb_immediate_notify *)ccbh; 8572 switch (event->event_type) { 8573 case EVENT_TYPE_BUS_RESET: 8574 ccbh->status = CAM_SCSI_BUS_RESET|CAM_DEV_QFRZN; 8575 break; 8576 default: 8577 ccbh->status = CAM_MESSAGE_RECV|CAM_DEV_QFRZN; 8578 inot->arg = event->event_type; 8579 inot->seq_id = event->event_arg; 8580 break; 8581 } 8582 inot->initiator_id = event->initiator_id; 8583 xpt_done((union ccb *)inot); 8584 lstate->event_r_idx++; 8585 if (lstate->event_r_idx == AHD_TMODE_EVENT_BUFFER_SIZE) 8586 lstate->event_r_idx = 0; 8587 } 8588} 8589#endif 8590 8591/******************** Sequencer Program Patching/Download *********************/ 8592 8593#ifdef AHD_DUMP_SEQ 8594void 8595ahd_dumpseq(struct ahd_softc* ahd) 8596{ 8597 int i; 8598 int max_prog; 8599 8600 max_prog = 2048; 8601 8602 ahd_outb(ahd, SEQCTL0, PERRORDIS|FAILDIS|FASTMODE|LOADRAM); 8603 ahd_outw(ahd, PRGMCNT, 0); 8604 for (i = 0; i < max_prog; i++) { 8605 uint8_t ins_bytes[4]; 8606 8607 ahd_insb(ahd, SEQRAM, ins_bytes, 4); 8608 printf("0x%08x\n", ins_bytes[0] << 24 8609 | ins_bytes[1] << 16 8610 | ins_bytes[2] << 8 8611 | ins_bytes[3]); 8612 } 8613} 8614#endif 8615 8616static void 8617ahd_loadseq(struct ahd_softc *ahd) 8618{ 8619 struct cs cs_table[num_critical_sections]; 8620 u_int begin_set[num_critical_sections]; 8621 u_int end_set[num_critical_sections]; 8622 struct patch *cur_patch; 8623 u_int cs_count; 8624 u_int cur_cs; 8625 u_int i; 8626 int downloaded; 8627 u_int skip_addr; 8628 u_int sg_prefetch_cnt; 8629 u_int sg_prefetch_cnt_limit; 8630 u_int sg_prefetch_align; 8631 u_int sg_size; 8632 u_int cacheline_mask; 8633 uint8_t download_consts[DOWNLOAD_CONST_COUNT]; 8634 8635 if (bootverbose) 8636 printf("%s: Downloading Sequencer Program...", 8637 ahd_name(ahd)); 8638 8639#if DOWNLOAD_CONST_COUNT != 8 8640#error "Download Const Mismatch" 8641#endif 8642 /* 8643 * Start out with 0 critical sections 8644 * that apply to this firmware load. 8645 */ 8646 cs_count = 0; 8647 cur_cs = 0; 8648 memset(begin_set, 0, sizeof(begin_set)); 8649 memset(end_set, 0, sizeof(end_set)); 8650 8651 /* 8652 * Setup downloadable constant table. 8653 * 8654 * The computation for the S/G prefetch variables is 8655 * a bit complicated. We would like to always fetch 8656 * in terms of cachelined sized increments. However, 8657 * if the cacheline is not an even multiple of the 8658 * SG element size or is larger than our SG RAM, using 8659 * just the cache size might leave us with only a portion 8660 * of an SG element at the tail of a prefetch. If the 8661 * cacheline is larger than our S/G prefetch buffer less 8662 * the size of an SG element, we may round down to a cacheline 8663 * that doesn't contain any or all of the S/G of interest 8664 * within the bounds of our S/G ram. Provide variables to 8665 * the sequencer that will allow it to handle these edge 8666 * cases. 8667 */ 8668 /* Start by aligning to the nearest cacheline. */ 8669 sg_prefetch_align = ahd->pci_cachesize; 8670 if (sg_prefetch_align == 0) 8671 sg_prefetch_align = 8; 8672 /* Round down to the nearest power of 2. */ 8673 while (powerof2(sg_prefetch_align) == 0) 8674 sg_prefetch_align--; 8675 8676 cacheline_mask = sg_prefetch_align - 1; 8677 8678 /* 8679 * If the cacheline boundary is greater than half our prefetch RAM 8680 * we risk not being able to fetch even a single complete S/G 8681 * segment if we align to that boundary. 8682 */ 8683 if (sg_prefetch_align > CCSGADDR_MAX/2) 8684 sg_prefetch_align = CCSGADDR_MAX/2; 8685 /* Start by fetching a single cacheline. */ 8686 sg_prefetch_cnt = sg_prefetch_align; 8687 /* 8688 * Increment the prefetch count by cachelines until 8689 * at least one S/G element will fit. 8690 */ 8691 sg_size = sizeof(struct ahd_dma_seg); 8692 if ((ahd->flags & AHD_64BIT_ADDRESSING) != 0) 8693 sg_size = sizeof(struct ahd_dma64_seg); 8694 while (sg_prefetch_cnt < sg_size) 8695 sg_prefetch_cnt += sg_prefetch_align; 8696 /* 8697 * If the cacheline is not an even multiple of 8698 * the S/G size, we may only get a partial S/G when 8699 * we align. Add a cacheline if this is the case. 8700 */ 8701 if ((sg_prefetch_align % sg_size) != 0 8702 && (sg_prefetch_cnt < CCSGADDR_MAX)) 8703 sg_prefetch_cnt += sg_prefetch_align; 8704 /* 8705 * Lastly, compute a value that the sequencer can use 8706 * to determine if the remainder of the CCSGRAM buffer 8707 * has a full S/G element in it. 8708 */ 8709 sg_prefetch_cnt_limit = -(sg_prefetch_cnt - sg_size + 1); 8710 download_consts[SG_PREFETCH_CNT] = sg_prefetch_cnt; 8711 download_consts[SG_PREFETCH_CNT_LIMIT] = sg_prefetch_cnt_limit; 8712 download_consts[SG_PREFETCH_ALIGN_MASK] = ~(sg_prefetch_align - 1); 8713 download_consts[SG_PREFETCH_ADDR_MASK] = (sg_prefetch_align - 1); 8714 download_consts[SG_SIZEOF] = sg_size; 8715 download_consts[PKT_OVERRUN_BUFOFFSET] = 8716 (ahd->overrun_buf - (uint8_t *)ahd->qoutfifo) / 256; 8717 download_consts[SCB_TRANSFER_SIZE] = SCB_TRANSFER_SIZE_1BYTE_LUN; 8718 download_consts[CACHELINE_MASK] = cacheline_mask; 8719 cur_patch = patches; 8720 downloaded = 0; 8721 skip_addr = 0; 8722 ahd_outb(ahd, SEQCTL0, PERRORDIS|FAILDIS|FASTMODE|LOADRAM); 8723 ahd_outw(ahd, PRGMCNT, 0); 8724 8725 for (i = 0; i < sizeof(seqprog)/4; i++) { 8726 if (ahd_check_patch(ahd, &cur_patch, i, &skip_addr) == 0) { 8727 /* 8728 * Don't download this instruction as it 8729 * is in a patch that was removed. 8730 */ 8731 continue; 8732 } 8733 /* 8734 * Move through the CS table until we find a CS 8735 * that might apply to this instruction. 8736 */ 8737 for (; cur_cs < num_critical_sections; cur_cs++) { 8738 if (critical_sections[cur_cs].end <= i) { 8739 if (begin_set[cs_count] == TRUE 8740 && end_set[cs_count] == FALSE) { 8741 cs_table[cs_count].end = downloaded; 8742 end_set[cs_count] = TRUE; 8743 cs_count++; 8744 } 8745 continue; 8746 } 8747 if (critical_sections[cur_cs].begin <= i 8748 && begin_set[cs_count] == FALSE) { 8749 cs_table[cs_count].begin = downloaded; 8750 begin_set[cs_count] = TRUE; 8751 } 8752 break; 8753 } 8754 ahd_download_instr(ahd, i, download_consts); 8755 downloaded++; 8756 } 8757 8758 ahd->num_critical_sections = cs_count; 8759 if (cs_count != 0) { 8760 8761 cs_count *= sizeof(struct cs); 8762 ahd->critical_sections = malloc(cs_count, M_DEVBUF, M_NOWAIT); 8763 if (ahd->critical_sections == NULL) 8764 panic("ahd_loadseq: Could not malloc"); 8765 memcpy(ahd->critical_sections, cs_table, cs_count); 8766 } 8767 ahd_outb(ahd, SEQCTL0, PERRORDIS|FAILDIS|FASTMODE); 8768 8769 if (bootverbose) { 8770 printf(" %d instructions downloaded\n", downloaded); 8771 printf("%s: Features 0x%x, Bugs 0x%x, Flags 0x%x\n", 8772 ahd_name(ahd), ahd->features, ahd->bugs, ahd->flags); 8773 } 8774} 8775 8776static int 8777ahd_check_patch(struct ahd_softc *ahd, struct patch **start_patch, 8778 u_int start_instr, u_int *skip_addr) 8779{ 8780 struct patch *cur_patch; 8781 struct patch *last_patch; 8782 u_int num_patches; 8783 8784 num_patches = sizeof(patches)/sizeof(struct patch); 8785 last_patch = &patches[num_patches]; 8786 cur_patch = *start_patch; 8787 8788 while (cur_patch < last_patch && start_instr == cur_patch->begin) { 8789 8790 if (cur_patch->patch_func(ahd) == 0) { 8791 8792 /* Start rejecting code */ 8793 *skip_addr = start_instr + cur_patch->skip_instr; 8794 cur_patch += cur_patch->skip_patch; 8795 } else { 8796 /* Accepted this patch. Advance to the next 8797 * one and wait for our intruction pointer to 8798 * hit this point. 8799 */ 8800 cur_patch++; 8801 } 8802 } 8803 8804 *start_patch = cur_patch; 8805 if (start_instr < *skip_addr) 8806 /* Still skipping */ 8807 return (0); 8808 8809 return (1); 8810} 8811 8812static u_int 8813ahd_resolve_seqaddr(struct ahd_softc *ahd, u_int address) 8814{ 8815 struct patch *cur_patch; 8816 int address_offset; 8817 u_int skip_addr; 8818 u_int i; 8819 8820 address_offset = 0; 8821 cur_patch = patches; 8822 skip_addr = 0; 8823 8824 for (i = 0; i < address;) { 8825 8826 ahd_check_patch(ahd, &cur_patch, i, &skip_addr); 8827 8828 if (skip_addr > i) { 8829 int end_addr; 8830 8831 end_addr = MIN(address, skip_addr); 8832 address_offset += end_addr - i; 8833 i = skip_addr; 8834 } else { 8835 i++; 8836 } 8837 } 8838 return (address - address_offset); 8839} 8840 8841static void 8842ahd_download_instr(struct ahd_softc *ahd, u_int instrptr, uint8_t *dconsts) 8843{ 8844 union ins_formats instr; 8845 struct ins_format1 *fmt1_ins; 8846 struct ins_format3 *fmt3_ins; 8847 u_int opcode; 8848 8849 /* 8850 * The firmware is always compiled into a little endian format. 8851 */ 8852 instr.integer = aic_le32toh(*(uint32_t*)&seqprog[instrptr * 4]); 8853 8854 fmt1_ins = &instr.format1; 8855 fmt3_ins = NULL; 8856 8857 /* Pull the opcode */ 8858 opcode = instr.format1.opcode; 8859 switch (opcode) { 8860 case AIC_OP_JMP: 8861 case AIC_OP_JC: 8862 case AIC_OP_JNC: 8863 case AIC_OP_CALL: 8864 case AIC_OP_JNE: 8865 case AIC_OP_JNZ: 8866 case AIC_OP_JE: 8867 case AIC_OP_JZ: 8868 { 8869 fmt3_ins = &instr.format3; 8870 fmt3_ins->address = ahd_resolve_seqaddr(ahd, fmt3_ins->address); 8871 /* FALLTHROUGH */ 8872 } 8873 case AIC_OP_OR: 8874 case AIC_OP_AND: 8875 case AIC_OP_XOR: 8876 case AIC_OP_ADD: 8877 case AIC_OP_ADC: 8878 case AIC_OP_BMOV: 8879 if (fmt1_ins->parity != 0) { 8880 fmt1_ins->immediate = dconsts[fmt1_ins->immediate]; 8881 } 8882 fmt1_ins->parity = 0; 8883 /* FALLTHROUGH */ 8884 case AIC_OP_ROL: 8885 { 8886 int i, count; 8887 8888 /* Calculate odd parity for the instruction */ 8889 for (i = 0, count = 0; i < 31; i++) { 8890 uint32_t mask; 8891 8892 mask = 0x01 << i; 8893 if ((instr.integer & mask) != 0) 8894 count++; 8895 } 8896 if ((count & 0x01) == 0) 8897 instr.format1.parity = 1; 8898 8899 /* The sequencer is a little endian cpu */ 8900 instr.integer = aic_htole32(instr.integer); 8901 ahd_outsb(ahd, SEQRAM, instr.bytes, 4); 8902 break; 8903 } 8904 default: 8905 panic("Unknown opcode encountered in seq program"); 8906 break; 8907 } 8908} 8909 8910static int 8911ahd_probe_stack_size(struct ahd_softc *ahd) 8912{ 8913 int last_probe; 8914 8915 last_probe = 0; 8916 while (1) { 8917 int i; 8918 8919 /* 8920 * We avoid using 0 as a pattern to avoid 8921 * confusion if the stack implementation 8922 * "back-fills" with zeros when "poping' 8923 * entries. 8924 */ 8925 for (i = 1; i <= last_probe+1; i++) { 8926 ahd_outb(ahd, STACK, i & 0xFF); 8927 ahd_outb(ahd, STACK, (i >> 8) & 0xFF); 8928 } 8929 8930 /* Verify */ 8931 for (i = last_probe+1; i > 0; i--) { 8932 u_int stack_entry; 8933 8934 stack_entry = ahd_inb(ahd, STACK) 8935 |(ahd_inb(ahd, STACK) << 8); 8936 if (stack_entry != i) 8937 goto sized; 8938 } 8939 last_probe++; 8940 } 8941sized: 8942 return (last_probe); 8943} 8944 8945void 8946ahd_dump_all_cards_state(void) 8947{ 8948 struct ahd_softc *list_ahd; 8949 8950 TAILQ_FOREACH(list_ahd, &ahd_tailq, links) { 8951 ahd_dump_card_state(list_ahd); 8952 } 8953} 8954 8955int 8956ahd_print_register(ahd_reg_parse_entry_t *table, u_int num_entries, 8957 const char *name, u_int address, u_int value, 8958 u_int *cur_column, u_int wrap_point) 8959{ 8960 int printed; 8961 u_int printed_mask; 8962 u_int dummy_column; 8963 8964 if (cur_column == NULL) { 8965 dummy_column = 0; 8966 cur_column = &dummy_column; 8967 } 8968 8969 if (cur_column != NULL && *cur_column >= wrap_point) { 8970 printf("\n"); 8971 *cur_column = 0; 8972 } 8973 printed = printf("%s[0x%x]", name, value); 8974 if (table == NULL) { 8975 printed += printf(" "); 8976 *cur_column += printed; 8977 return (printed); 8978 } 8979 printed_mask = 0; 8980 while (printed_mask != 0xFF) { 8981 int entry; 8982 8983 for (entry = 0; entry < num_entries; entry++) { 8984 if (((value & table[entry].mask) 8985 != table[entry].value) 8986 || ((printed_mask & table[entry].mask) 8987 == table[entry].mask)) 8988 continue; 8989 8990 printed += printf("%s%s", 8991 printed_mask == 0 ? ":(" : "|", 8992 table[entry].name); 8993 printed_mask |= table[entry].mask; 8994 8995 break; 8996 } 8997 if (entry >= num_entries) 8998 break; 8999 } 9000 if (printed_mask != 0) 9001 printed += printf(") "); 9002 else 9003 printed += printf(" "); 9004 *cur_column += printed; 9005 return (printed); 9006} 9007 9008void 9009ahd_dump_card_state(struct ahd_softc *ahd) 9010{ 9011 struct scb *scb; 9012 ahd_mode_state saved_modes; 9013 u_int dffstat; 9014 int paused; 9015 u_int scb_index; 9016 u_int saved_scb_index; 9017 u_int cur_col; 9018 int i; 9019 9020 if (ahd_is_paused(ahd)) { 9021 paused = 1; 9022 } else { 9023 paused = 0; 9024 ahd_pause(ahd); 9025 } 9026 saved_modes = ahd_save_modes(ahd); 9027 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 9028 printf(">>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<\n" 9029 "%s: Dumping Card State at program address 0x%x Mode 0x%x\n", 9030 ahd_name(ahd), 9031 ahd_inw(ahd, CURADDR), 9032 ahd_build_mode_state(ahd, ahd->saved_src_mode, 9033 ahd->saved_dst_mode)); 9034 if (paused) 9035 printf("Card was paused\n"); 9036 9037 if (ahd_check_cmdcmpltqueues(ahd)) 9038 printf("Completions are pending\n"); 9039 9040 /* 9041 * Mode independent registers. 9042 */ 9043 cur_col = 0; 9044 ahd_intstat_print(ahd_inb(ahd, INTSTAT), &cur_col, 50); 9045 ahd_seloid_print(ahd_inb(ahd, SELOID), &cur_col, 50); 9046 ahd_selid_print(ahd_inb(ahd, SELID), &cur_col, 50); 9047 ahd_hs_mailbox_print(ahd_inb(ahd, LOCAL_HS_MAILBOX), &cur_col, 50); 9048 ahd_intctl_print(ahd_inb(ahd, INTCTL), &cur_col, 50); 9049 ahd_seqintstat_print(ahd_inb(ahd, SEQINTSTAT), &cur_col, 50); 9050 ahd_saved_mode_print(ahd_inb(ahd, SAVED_MODE), &cur_col, 50); 9051 ahd_dffstat_print(ahd_inb(ahd, DFFSTAT), &cur_col, 50); 9052 ahd_scsisigi_print(ahd_inb(ahd, SCSISIGI), &cur_col, 50); 9053 ahd_scsiphase_print(ahd_inb(ahd, SCSIPHASE), &cur_col, 50); 9054 ahd_scsibus_print(ahd_inb(ahd, SCSIBUS), &cur_col, 50); 9055 ahd_lastphase_print(ahd_inb(ahd, LASTPHASE), &cur_col, 50); 9056 ahd_scsiseq0_print(ahd_inb(ahd, SCSISEQ0), &cur_col, 50); 9057 ahd_scsiseq1_print(ahd_inb(ahd, SCSISEQ1), &cur_col, 50); 9058 ahd_seqctl0_print(ahd_inb(ahd, SEQCTL0), &cur_col, 50); 9059 ahd_seqintctl_print(ahd_inb(ahd, SEQINTCTL), &cur_col, 50); 9060 ahd_seq_flags_print(ahd_inb(ahd, SEQ_FLAGS), &cur_col, 50); 9061 ahd_seq_flags2_print(ahd_inb(ahd, SEQ_FLAGS2), &cur_col, 50); 9062 ahd_qfreeze_count_print(ahd_inw(ahd, QFREEZE_COUNT), &cur_col, 50); 9063 ahd_kernel_qfreeze_count_print(ahd_inw(ahd, KERNEL_QFREEZE_COUNT), 9064 &cur_col, 50); 9065 ahd_mk_message_scb_print(ahd_inw(ahd, MK_MESSAGE_SCB), &cur_col, 50); 9066 ahd_mk_message_scsiid_print(ahd_inb(ahd, MK_MESSAGE_SCSIID), 9067 &cur_col, 50); 9068 ahd_sstat0_print(ahd_inb(ahd, SSTAT0), &cur_col, 50); 9069 ahd_sstat1_print(ahd_inb(ahd, SSTAT1), &cur_col, 50); 9070 ahd_sstat2_print(ahd_inb(ahd, SSTAT2), &cur_col, 50); 9071 ahd_sstat3_print(ahd_inb(ahd, SSTAT3), &cur_col, 50); 9072 ahd_perrdiag_print(ahd_inb(ahd, PERRDIAG), &cur_col, 50); 9073 ahd_simode1_print(ahd_inb(ahd, SIMODE1), &cur_col, 50); 9074 ahd_lqistat0_print(ahd_inb(ahd, LQISTAT0), &cur_col, 50); 9075 ahd_lqistat1_print(ahd_inb(ahd, LQISTAT1), &cur_col, 50); 9076 ahd_lqistat2_print(ahd_inb(ahd, LQISTAT2), &cur_col, 50); 9077 ahd_lqostat0_print(ahd_inb(ahd, LQOSTAT0), &cur_col, 50); 9078 ahd_lqostat1_print(ahd_inb(ahd, LQOSTAT1), &cur_col, 50); 9079 ahd_lqostat2_print(ahd_inb(ahd, LQOSTAT2), &cur_col, 50); 9080 printf("\n"); 9081 printf("\nSCB Count = %d CMDS_PENDING = %d LASTSCB 0x%x " 9082 "CURRSCB 0x%x NEXTSCB 0x%x\n", 9083 ahd->scb_data.numscbs, ahd_inw(ahd, CMDS_PENDING), 9084 ahd_inw(ahd, LASTSCB), ahd_inw(ahd, CURRSCB), 9085 ahd_inw(ahd, NEXTSCB)); 9086 cur_col = 0; 9087 /* QINFIFO */ 9088 ahd_search_qinfifo(ahd, CAM_TARGET_WILDCARD, ALL_CHANNELS, 9089 CAM_LUN_WILDCARD, SCB_LIST_NULL, 9090 ROLE_UNKNOWN, /*status*/0, SEARCH_PRINT); 9091 saved_scb_index = ahd_get_scbptr(ahd); 9092 printf("Pending list:"); 9093 i = 0; 9094 LIST_FOREACH(scb, &ahd->pending_scbs, pending_links) { 9095 if (i++ > AHD_SCB_MAX) 9096 break; 9097 cur_col = printf("\n%3d FIFO_USE[0x%x] ", SCB_GET_TAG(scb), 9098 ahd_inb_scbram(ahd, SCB_FIFO_USE_COUNT)); 9099 ahd_set_scbptr(ahd, SCB_GET_TAG(scb)); 9100 ahd_scb_control_print(ahd_inb_scbram(ahd, SCB_CONTROL), 9101 &cur_col, 60); 9102 ahd_scb_scsiid_print(ahd_inb_scbram(ahd, SCB_SCSIID), 9103 &cur_col, 60); 9104 } 9105 printf("\nTotal %d\n", i); 9106 9107 printf("Kernel Free SCB lists: "); 9108 i = 0; 9109 TAILQ_FOREACH(scb, &ahd->scb_data.free_scbs, links.tqe) { 9110 struct scb *list_scb; 9111 9112 printf("\n COLIDX[%d]: ", AHD_GET_SCB_COL_IDX(ahd, scb)); 9113 list_scb = scb; 9114 do { 9115 printf("%d ", SCB_GET_TAG(list_scb)); 9116 list_scb = LIST_NEXT(list_scb, collision_links); 9117 } while (list_scb && i++ < AHD_SCB_MAX); 9118 } 9119 9120 printf("\n Any Device: "); 9121 LIST_FOREACH(scb, &ahd->scb_data.any_dev_free_scb_list, links.le) { 9122 if (i++ > AHD_SCB_MAX) 9123 break; 9124 printf("%d ", SCB_GET_TAG(scb)); 9125 } 9126 printf("\n"); 9127 9128 printf("Sequencer Complete DMA-inprog list: "); 9129 scb_index = ahd_inw(ahd, COMPLETE_SCB_DMAINPROG_HEAD); 9130 i = 0; 9131 while (!SCBID_IS_NULL(scb_index) && i++ < AHD_SCB_MAX) { 9132 ahd_set_scbptr(ahd, scb_index); 9133 printf("%d ", scb_index); 9134 scb_index = ahd_inw_scbram(ahd, SCB_NEXT_COMPLETE); 9135 } 9136 printf("\n"); 9137 9138 printf("Sequencer Complete list: "); 9139 scb_index = ahd_inw(ahd, COMPLETE_SCB_HEAD); 9140 i = 0; 9141 while (!SCBID_IS_NULL(scb_index) && i++ < AHD_SCB_MAX) { 9142 ahd_set_scbptr(ahd, scb_index); 9143 printf("%d ", scb_index); 9144 scb_index = ahd_inw_scbram(ahd, SCB_NEXT_COMPLETE); 9145 } 9146 printf("\n"); 9147 9148 9149 printf("Sequencer DMA-Up and Complete list: "); 9150 scb_index = ahd_inw(ahd, COMPLETE_DMA_SCB_HEAD); 9151 i = 0; 9152 while (!SCBID_IS_NULL(scb_index) && i++ < AHD_SCB_MAX) { 9153 ahd_set_scbptr(ahd, scb_index); 9154 printf("%d ", scb_index); 9155 scb_index = ahd_inw_scbram(ahd, SCB_NEXT_COMPLETE); 9156 } 9157 printf("\n"); 9158 printf("Sequencer On QFreeze and Complete list: "); 9159 scb_index = ahd_inw(ahd, COMPLETE_ON_QFREEZE_HEAD); 9160 i = 0; 9161 while (!SCBID_IS_NULL(scb_index) && i++ < AHD_SCB_MAX) { 9162 ahd_set_scbptr(ahd, scb_index); 9163 printf("%d ", scb_index); 9164 scb_index = ahd_inw_scbram(ahd, SCB_NEXT_COMPLETE); 9165 } 9166 printf("\n"); 9167 ahd_set_scbptr(ahd, saved_scb_index); 9168 dffstat = ahd_inb(ahd, DFFSTAT); 9169 for (i = 0; i < 2; i++) { 9170#ifdef AHD_DEBUG 9171 struct scb *fifo_scb; 9172#endif 9173 u_int fifo_scbptr; 9174 9175 ahd_set_modes(ahd, AHD_MODE_DFF0 + i, AHD_MODE_DFF0 + i); 9176 fifo_scbptr = ahd_get_scbptr(ahd); 9177 printf("\n\n%s: FIFO%d %s, LONGJMP == 0x%x, SCB 0x%x\n", 9178 ahd_name(ahd), i, 9179 (dffstat & (FIFO0FREE << i)) ? "Free" : "Active", 9180 ahd_inw(ahd, LONGJMP_ADDR), fifo_scbptr); 9181 cur_col = 0; 9182 ahd_seqimode_print(ahd_inb(ahd, SEQIMODE), &cur_col, 50); 9183 ahd_seqintsrc_print(ahd_inb(ahd, SEQINTSRC), &cur_col, 50); 9184 ahd_dfcntrl_print(ahd_inb(ahd, DFCNTRL), &cur_col, 50); 9185 ahd_dfstatus_print(ahd_inb(ahd, DFSTATUS), &cur_col, 50); 9186 ahd_sg_cache_shadow_print(ahd_inb(ahd, SG_CACHE_SHADOW), 9187 &cur_col, 50); 9188 ahd_sg_state_print(ahd_inb(ahd, SG_STATE), &cur_col, 50); 9189 ahd_dffsxfrctl_print(ahd_inb(ahd, DFFSXFRCTL), &cur_col, 50); 9190 ahd_soffcnt_print(ahd_inb(ahd, SOFFCNT), &cur_col, 50); 9191 ahd_mdffstat_print(ahd_inb(ahd, MDFFSTAT), &cur_col, 50); 9192 if (cur_col > 50) { 9193 printf("\n"); 9194 cur_col = 0; 9195 } 9196 cur_col += printf("SHADDR = 0x%x%x, SHCNT = 0x%x ", 9197 ahd_inl(ahd, SHADDR+4), 9198 ahd_inl(ahd, SHADDR), 9199 (ahd_inb(ahd, SHCNT) 9200 | (ahd_inb(ahd, SHCNT + 1) << 8) 9201 | (ahd_inb(ahd, SHCNT + 2) << 16))); 9202 if (cur_col > 50) { 9203 printf("\n"); 9204 cur_col = 0; 9205 } 9206 cur_col += printf("HADDR = 0x%x%x, HCNT = 0x%x ", 9207 ahd_inl(ahd, HADDR+4), 9208 ahd_inl(ahd, HADDR), 9209 (ahd_inb(ahd, HCNT) 9210 | (ahd_inb(ahd, HCNT + 1) << 8) 9211 | (ahd_inb(ahd, HCNT + 2) << 16))); 9212 ahd_ccsgctl_print(ahd_inb(ahd, CCSGCTL), &cur_col, 50); 9213#ifdef AHD_DEBUG 9214 if ((ahd_debug & AHD_SHOW_SG) != 0) { 9215 fifo_scb = ahd_lookup_scb(ahd, fifo_scbptr); 9216 if (fifo_scb != NULL) 9217 ahd_dump_sglist(fifo_scb); 9218 } 9219#endif 9220 } 9221 printf("\nLQIN: "); 9222 for (i = 0; i < 20; i++) 9223 printf("0x%x ", ahd_inb(ahd, LQIN + i)); 9224 printf("\n"); 9225 ahd_set_modes(ahd, AHD_MODE_CFG, AHD_MODE_CFG); 9226 printf("%s: LQISTATE = 0x%x, LQOSTATE = 0x%x, OPTIONMODE = 0x%x\n", 9227 ahd_name(ahd), ahd_inb(ahd, LQISTATE), ahd_inb(ahd, LQOSTATE), 9228 ahd_inb(ahd, OPTIONMODE)); 9229 printf("%s: OS_SPACE_CNT = 0x%x MAXCMDCNT = 0x%x\n", 9230 ahd_name(ahd), ahd_inb(ahd, OS_SPACE_CNT), 9231 ahd_inb(ahd, MAXCMDCNT)); 9232 printf("%s: SAVED_SCSIID = 0x%x SAVED_LUN = 0x%x\n", 9233 ahd_name(ahd), ahd_inb(ahd, SAVED_SCSIID), 9234 ahd_inb(ahd, SAVED_LUN)); 9235 ahd_simode0_print(ahd_inb(ahd, SIMODE0), &cur_col, 50); 9236 printf("\n"); 9237 ahd_set_modes(ahd, AHD_MODE_CCHAN, AHD_MODE_CCHAN); 9238 cur_col = 0; 9239 ahd_ccscbctl_print(ahd_inb(ahd, CCSCBCTL), &cur_col, 50); 9240 printf("\n"); 9241 ahd_set_modes(ahd, ahd->saved_src_mode, ahd->saved_dst_mode); 9242 printf("%s: REG0 == 0x%x, SINDEX = 0x%x, DINDEX = 0x%x\n", 9243 ahd_name(ahd), ahd_inw(ahd, REG0), ahd_inw(ahd, SINDEX), 9244 ahd_inw(ahd, DINDEX)); 9245 printf("%s: SCBPTR == 0x%x, SCB_NEXT == 0x%x, SCB_NEXT2 == 0x%x\n", 9246 ahd_name(ahd), ahd_get_scbptr(ahd), 9247 ahd_inw_scbram(ahd, SCB_NEXT), 9248 ahd_inw_scbram(ahd, SCB_NEXT2)); 9249 printf("CDB %x %x %x %x %x %x\n", 9250 ahd_inb_scbram(ahd, SCB_CDB_STORE), 9251 ahd_inb_scbram(ahd, SCB_CDB_STORE+1), 9252 ahd_inb_scbram(ahd, SCB_CDB_STORE+2), 9253 ahd_inb_scbram(ahd, SCB_CDB_STORE+3), 9254 ahd_inb_scbram(ahd, SCB_CDB_STORE+4), 9255 ahd_inb_scbram(ahd, SCB_CDB_STORE+5)); 9256 printf("STACK:"); 9257 for (i = 0; i < ahd->stack_size; i++) { 9258 ahd->saved_stack[i] = 9259 ahd_inb(ahd, STACK)|(ahd_inb(ahd, STACK) << 8); 9260 printf(" 0x%x", ahd->saved_stack[i]); 9261 } 9262 for (i = ahd->stack_size-1; i >= 0; i--) { 9263 ahd_outb(ahd, STACK, ahd->saved_stack[i] & 0xFF); 9264 ahd_outb(ahd, STACK, (ahd->saved_stack[i] >> 8) & 0xFF); 9265 } 9266 printf("\n<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>\n"); 9267 ahd_platform_dump_card_state(ahd); 9268 ahd_restore_modes(ahd, saved_modes); 9269 if (paused == 0) 9270 ahd_unpause(ahd); 9271} 9272 9273void 9274ahd_dump_scbs(struct ahd_softc *ahd) 9275{ 9276 ahd_mode_state saved_modes; 9277 u_int saved_scb_index; 9278 int i; 9279 9280 saved_modes = ahd_save_modes(ahd); 9281 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 9282 saved_scb_index = ahd_get_scbptr(ahd); 9283 for (i = 0; i < AHD_SCB_MAX; i++) { 9284 ahd_set_scbptr(ahd, i); 9285 printf("%3d", i); 9286 printf("(CTRL 0x%x ID 0x%x N 0x%x N2 0x%x SG 0x%x, RSG 0x%x)\n", 9287 ahd_inb_scbram(ahd, SCB_CONTROL), 9288 ahd_inb_scbram(ahd, SCB_SCSIID), 9289 ahd_inw_scbram(ahd, SCB_NEXT), 9290 ahd_inw_scbram(ahd, SCB_NEXT2), 9291 ahd_inl_scbram(ahd, SCB_SGPTR), 9292 ahd_inl_scbram(ahd, SCB_RESIDUAL_SGPTR)); 9293 } 9294 printf("\n"); 9295 ahd_set_scbptr(ahd, saved_scb_index); 9296 ahd_restore_modes(ahd, saved_modes); 9297} 9298 9299 9300/*************************** Timeout Handling *********************************/ 9301void 9302ahd_timeout(struct scb *scb) 9303{ 9304 struct ahd_softc *ahd; 9305 9306 ahd = scb->ahd_softc; 9307 if ((scb->flags & SCB_ACTIVE) != 0) { 9308 if ((scb->flags & SCB_TIMEDOUT) == 0) { 9309 LIST_INSERT_HEAD(&ahd->timedout_scbs, scb, 9310 timedout_links); 9311 scb->flags |= SCB_TIMEDOUT; 9312 } 9313 ahd_wakeup_recovery_thread(ahd); 9314 } 9315} 9316 9317/* 9318 * ahd_recover_commands determines if any of the commands that have currently 9319 * timedout are the root cause for this timeout. Innocent commands are given 9320 * a new timeout while we wait for the command executing on the bus to timeout. 9321 * This routine is invoked from a thread context so we are allowed to sleep. 9322 * Our lock is not held on entry. 9323 */ 9324void 9325ahd_recover_commands(struct ahd_softc *ahd) 9326{ 9327 struct scb *scb; 9328 struct scb *active_scb; 9329 int found; 9330 int was_paused; 9331 u_int active_scbptr; 9332 u_int last_phase; 9333 9334 /* 9335 * Pause the controller and manually flush any 9336 * commands that have just completed but that our 9337 * interrupt handler has yet to see. 9338 */ 9339 was_paused = ahd_is_paused(ahd); 9340 9341 printf("%s: Recovery Initiated - Card was %spaused\n", ahd_name(ahd), 9342 was_paused ? "" : "not "); 9343 AHD_CORRECTABLE_ERROR(ahd); 9344 ahd_dump_card_state(ahd); 9345 9346 ahd_pause_and_flushwork(ahd); 9347 9348 if (LIST_EMPTY(&ahd->timedout_scbs) != 0) { 9349 /* 9350 * The timedout commands have already 9351 * completed. This typically means 9352 * that either the timeout value was on 9353 * the hairy edge of what the device 9354 * requires or - more likely - interrupts 9355 * are not happening. 9356 */ 9357 printf("%s: Timedout SCBs already complete. " 9358 "Interrupts may not be functioning.\n", ahd_name(ahd)); 9359 ahd_unpause(ahd); 9360 return; 9361 } 9362 9363 /* 9364 * Determine identity of SCB acting on the bus. 9365 * This test only catches non-packetized transactions. 9366 * Due to the fleeting nature of packetized operations, 9367 * we can't easily determine that a packetized operation 9368 * is on the bus. 9369 */ 9370 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 9371 last_phase = ahd_inb(ahd, LASTPHASE); 9372 active_scbptr = ahd_get_scbptr(ahd); 9373 active_scb = NULL; 9374 if (last_phase != P_BUSFREE 9375 || (ahd_inb(ahd, SEQ_FLAGS) & NOT_IDENTIFIED) == 0) 9376 active_scb = ahd_lookup_scb(ahd, active_scbptr); 9377 9378 while ((scb = LIST_FIRST(&ahd->timedout_scbs)) != NULL) { 9379 int target; 9380 int lun; 9381 char channel; 9382 9383 target = SCB_GET_TARGET(ahd, scb); 9384 channel = SCB_GET_CHANNEL(ahd, scb); 9385 lun = SCB_GET_LUN(scb); 9386 9387 ahd_print_path(ahd, scb); 9388 printf("SCB %d - timed out\n", SCB_GET_TAG(scb)); 9389 9390 if (scb->flags & (SCB_DEVICE_RESET|SCB_ABORT)) { 9391 /* 9392 * Been down this road before. 9393 * Do a full bus reset. 9394 */ 9395 aic_set_transaction_status(scb, CAM_CMD_TIMEOUT); 9396bus_reset: 9397 found = ahd_reset_channel(ahd, channel, 9398 /*Initiate Reset*/TRUE); 9399 printf("%s: Issued Channel %c Bus Reset. " 9400 "%d SCBs aborted\n", ahd_name(ahd), channel, 9401 found); 9402 continue; 9403 } 9404 9405 /* 9406 * Remove the command from the timedout list in 9407 * preparation for requeing it. 9408 */ 9409 LIST_REMOVE(scb, timedout_links); 9410 scb->flags &= ~SCB_TIMEDOUT; 9411 9412 if (active_scb != NULL) { 9413 9414 if (active_scb != scb) { 9415 9416 /* 9417 * If the active SCB is not us, assume that 9418 * the active SCB has a longer timeout than 9419 * the timedout SCB, and wait for the active 9420 * SCB to timeout. As a safeguard, only 9421 * allow this deferral to continue if some 9422 * untimed-out command is outstanding. 9423 */ 9424 if (ahd_other_scb_timeout(ahd, scb, 9425 active_scb) == 0) 9426 goto bus_reset; 9427 continue; 9428 } 9429 9430 /* 9431 * We're active on the bus, so assert ATN 9432 * and hope that the target responds. 9433 */ 9434 ahd_set_recoveryscb(ahd, active_scb); 9435 active_scb->flags |= SCB_RECOVERY_SCB|SCB_DEVICE_RESET; 9436 ahd_outb(ahd, MSG_OUT, HOST_MSG); 9437 ahd_outb(ahd, SCSISIGO, last_phase|ATNO); 9438 ahd_print_path(ahd, active_scb); 9439 printf("BDR message in message buffer\n"); 9440 aic_scb_timer_reset(scb, 2 * 1000); 9441 break; 9442 } else if (last_phase != P_BUSFREE 9443 && ahd_inb(ahd, SCSIPHASE) == 0) { 9444 /* 9445 * SCB is not identified, there 9446 * is no pending REQ, and the sequencer 9447 * has not seen a busfree. Looks like 9448 * a stuck connection waiting to 9449 * go busfree. Reset the bus. 9450 */ 9451 printf("%s: Connection stuck awaiting busfree or " 9452 "Identify Msg.\n", ahd_name(ahd)); 9453 goto bus_reset; 9454 } else if (ahd_search_qinfifo(ahd, target, channel, lun, 9455 SCB_GET_TAG(scb), 9456 ROLE_INITIATOR, /*status*/0, 9457 SEARCH_COUNT) > 0) { 9458 9459 /* 9460 * We haven't even gone out on the bus 9461 * yet, so the timeout must be due to 9462 * some other command. Reset the timer 9463 * and go on. 9464 */ 9465 if (ahd_other_scb_timeout(ahd, scb, NULL) == 0) 9466 goto bus_reset; 9467 } else { 9468 /* 9469 * This SCB is for a disconnected transaction 9470 * and we haven't found a better candidate on 9471 * the bus to explain this timeout. 9472 */ 9473 ahd_set_recoveryscb(ahd, scb); 9474 9475 /* 9476 * Actually re-queue this SCB in an attempt 9477 * to select the device before it reconnects. 9478 * In either case (selection or reselection), 9479 * we will now issue a target reset to the 9480 * timed-out device. 9481 */ 9482 scb->flags |= SCB_DEVICE_RESET; 9483 scb->hscb->cdb_len = 0; 9484 scb->hscb->task_attribute = 0; 9485 scb->hscb->task_management = SIU_TASKMGMT_ABORT_TASK; 9486 9487 ahd_set_scbptr(ahd, SCB_GET_TAG(scb)); 9488 if ((scb->flags & SCB_PACKETIZED) != 0) { 9489 /* 9490 * Mark the SCB has having an outstanding 9491 * task management function. Should the command 9492 * complete normally before the task management 9493 * function can be sent, the host will be 9494 * notified to abort our requeued SCB. 9495 */ 9496 ahd_outb(ahd, SCB_TASK_MANAGEMENT, 9497 scb->hscb->task_management); 9498 } else { 9499 /* 9500 * If non-packetized, set the MK_MESSAGE control 9501 * bit indicating that we desire to send a 9502 * message. We also set the disconnected flag 9503 * since there is no guarantee that our SCB 9504 * control byte matches the version on the 9505 * card. We don't want the sequencer to abort 9506 * the command thinking an unsolicited 9507 * reselection occurred. 9508 */ 9509 scb->hscb->control |= MK_MESSAGE|DISCONNECTED; 9510 9511 /* 9512 * The sequencer will never re-reference the 9513 * in-core SCB. To make sure we are notified 9514 * during reslection, set the MK_MESSAGE flag in 9515 * the card's copy of the SCB. 9516 */ 9517 ahd_outb(ahd, SCB_CONTROL, 9518 ahd_inb(ahd, SCB_CONTROL)|MK_MESSAGE); 9519 } 9520 9521 /* 9522 * Clear out any entries in the QINFIFO first 9523 * so we are the next SCB for this target 9524 * to run. 9525 */ 9526 ahd_search_qinfifo(ahd, target, channel, lun, 9527 SCB_LIST_NULL, ROLE_INITIATOR, 9528 CAM_REQUEUE_REQ, SEARCH_COMPLETE); 9529 ahd_qinfifo_requeue_tail(ahd, scb); 9530 ahd_set_scbptr(ahd, active_scbptr); 9531 ahd_print_path(ahd, scb); 9532 printf("Queuing a BDR SCB\n"); 9533 aic_scb_timer_reset(scb, 2 * 1000); 9534 break; 9535 } 9536 } 9537 9538 /* 9539 * Any remaining SCBs were not the "culprit", so remove 9540 * them from the timeout list. The timer for these commands 9541 * will be reset once the recovery SCB completes. 9542 */ 9543 while ((scb = LIST_FIRST(&ahd->timedout_scbs)) != NULL) { 9544 9545 LIST_REMOVE(scb, timedout_links); 9546 scb->flags &= ~SCB_TIMEDOUT; 9547 } 9548 9549 ahd_unpause(ahd); 9550} 9551 9552/* 9553 * Re-schedule a timeout for the passed in SCB if we determine that some 9554 * other SCB is in the process of recovery or an SCB with a longer 9555 * timeout is still pending. Limit our search to just "other_scb" 9556 * if it is non-NULL. 9557 */ 9558static int 9559ahd_other_scb_timeout(struct ahd_softc *ahd, struct scb *scb, 9560 struct scb *other_scb) 9561{ 9562 u_int newtimeout; 9563 int found; 9564 9565 ahd_print_path(ahd, scb); 9566 printf("Other SCB Timeout%s", 9567 (scb->flags & SCB_OTHERTCL_TIMEOUT) != 0 9568 ? " again\n" : "\n"); 9569 9570 AHD_UNCORRECTABLE_ERROR(ahd); 9571 newtimeout = aic_get_timeout(scb); 9572 scb->flags |= SCB_OTHERTCL_TIMEOUT; 9573 found = 0; 9574 if (other_scb != NULL) { 9575 if ((other_scb->flags 9576 & (SCB_OTHERTCL_TIMEOUT|SCB_TIMEDOUT)) == 0 9577 || (other_scb->flags & SCB_RECOVERY_SCB) != 0) { 9578 found++; 9579 newtimeout = MAX(aic_get_timeout(other_scb), 9580 newtimeout); 9581 } 9582 } else { 9583 LIST_FOREACH(other_scb, &ahd->pending_scbs, pending_links) { 9584 if ((other_scb->flags 9585 & (SCB_OTHERTCL_TIMEOUT|SCB_TIMEDOUT)) == 0 9586 || (other_scb->flags & SCB_RECOVERY_SCB) != 0) { 9587 found++; 9588 newtimeout = MAX(aic_get_timeout(other_scb), 9589 newtimeout); 9590 } 9591 } 9592 } 9593 9594 if (found != 0) 9595 aic_scb_timer_reset(scb, newtimeout); 9596 else { 9597 ahd_print_path(ahd, scb); 9598 printf("No other SCB worth waiting for...\n"); 9599 } 9600 9601 return (found != 0); 9602} 9603 9604/**************************** Flexport Logic **********************************/ 9605/* 9606 * Read count 16bit words from 16bit word address start_addr from the 9607 * SEEPROM attached to the controller, into buf, using the controller's 9608 * SEEPROM reading state machine. Optionally treat the data as a byte 9609 * stream in terms of byte order. 9610 */ 9611int 9612ahd_read_seeprom(struct ahd_softc *ahd, uint16_t *buf, 9613 u_int start_addr, u_int count, int bytestream) 9614{ 9615 u_int cur_addr; 9616 u_int end_addr; 9617 int error; 9618 9619 /* 9620 * If we never make it through the loop even once, 9621 * we were passed invalid arguments. 9622 */ 9623 error = EINVAL; 9624 AHD_ASSERT_MODES(ahd, AHD_MODE_SCSI_MSK, AHD_MODE_SCSI_MSK); 9625 end_addr = start_addr + count; 9626 for (cur_addr = start_addr; cur_addr < end_addr; cur_addr++) { 9627 9628 ahd_outb(ahd, SEEADR, cur_addr); 9629 ahd_outb(ahd, SEECTL, SEEOP_READ | SEESTART); 9630 9631 error = ahd_wait_seeprom(ahd); 9632 if (error) 9633 break; 9634 if (bytestream != 0) { 9635 uint8_t *bytestream_ptr; 9636 9637 bytestream_ptr = (uint8_t *)buf; 9638 *bytestream_ptr++ = ahd_inb(ahd, SEEDAT); 9639 *bytestream_ptr = ahd_inb(ahd, SEEDAT+1); 9640 } else { 9641 /* 9642 * ahd_inw() already handles machine byte order. 9643 */ 9644 *buf = ahd_inw(ahd, SEEDAT); 9645 } 9646 buf++; 9647 } 9648 return (error); 9649} 9650 9651/* 9652 * Write count 16bit words from buf, into SEEPROM attache to the 9653 * controller starting at 16bit word address start_addr, using the 9654 * controller's SEEPROM writing state machine. 9655 */ 9656int 9657ahd_write_seeprom(struct ahd_softc *ahd, uint16_t *buf, 9658 u_int start_addr, u_int count) 9659{ 9660 u_int cur_addr; 9661 u_int end_addr; 9662 int error; 9663 int retval; 9664 9665 AHD_ASSERT_MODES(ahd, AHD_MODE_SCSI_MSK, AHD_MODE_SCSI_MSK); 9666 error = ENOENT; 9667 9668 /* Place the chip into write-enable mode */ 9669 ahd_outb(ahd, SEEADR, SEEOP_EWEN_ADDR); 9670 ahd_outb(ahd, SEECTL, SEEOP_EWEN | SEESTART); 9671 error = ahd_wait_seeprom(ahd); 9672 if (error) 9673 return (error); 9674 9675 /* 9676 * Write the data. If we don't get throught the loop at 9677 * least once, the arguments were invalid. 9678 */ 9679 retval = EINVAL; 9680 end_addr = start_addr + count; 9681 for (cur_addr = start_addr; cur_addr < end_addr; cur_addr++) { 9682 ahd_outw(ahd, SEEDAT, *buf++); 9683 ahd_outb(ahd, SEEADR, cur_addr); 9684 ahd_outb(ahd, SEECTL, SEEOP_WRITE | SEESTART); 9685 9686 retval = ahd_wait_seeprom(ahd); 9687 if (retval) 9688 break; 9689 } 9690 9691 /* 9692 * Disable writes. 9693 */ 9694 ahd_outb(ahd, SEEADR, SEEOP_EWDS_ADDR); 9695 ahd_outb(ahd, SEECTL, SEEOP_EWDS | SEESTART); 9696 error = ahd_wait_seeprom(ahd); 9697 if (error) 9698 return (error); 9699 return (retval); 9700} 9701 9702/* 9703 * Wait ~100us for the serial eeprom to satisfy our request. 9704 */ 9705int 9706ahd_wait_seeprom(struct ahd_softc *ahd) 9707{ 9708 int cnt; 9709 9710 cnt = 5000; 9711 while ((ahd_inb(ahd, SEESTAT) & (SEEARBACK|SEEBUSY)) != 0 && --cnt) 9712 aic_delay(5); 9713 9714 if (cnt == 0) 9715 return (ETIMEDOUT); 9716 return (0); 9717} 9718 9719/* 9720 * Validate the two checksums in the per_channel 9721 * vital product data struct. 9722 */ 9723int 9724ahd_verify_vpd_cksum(struct vpd_config *vpd) 9725{ 9726 int i; 9727 int maxaddr; 9728 uint32_t checksum; 9729 uint8_t *vpdarray; 9730 9731 vpdarray = (uint8_t *)vpd; 9732 maxaddr = offsetof(struct vpd_config, vpd_checksum); 9733 checksum = 0; 9734 for (i = offsetof(struct vpd_config, resource_type); i < maxaddr; i++) 9735 checksum = checksum + vpdarray[i]; 9736 if (checksum == 0 9737 || (-checksum & 0xFF) != vpd->vpd_checksum) 9738 return (0); 9739 9740 checksum = 0; 9741 maxaddr = offsetof(struct vpd_config, checksum); 9742 for (i = offsetof(struct vpd_config, default_target_flags); 9743 i < maxaddr; i++) 9744 checksum = checksum + vpdarray[i]; 9745 if (checksum == 0 9746 || (-checksum & 0xFF) != vpd->checksum) 9747 return (0); 9748 return (1); 9749} 9750 9751int 9752ahd_verify_cksum(struct seeprom_config *sc) 9753{ 9754 int i; 9755 int maxaddr; 9756 uint32_t checksum; 9757 uint16_t *scarray; 9758 9759 maxaddr = (sizeof(*sc)/2) - 1; 9760 checksum = 0; 9761 scarray = (uint16_t *)sc; 9762 9763 for (i = 0; i < maxaddr; i++) 9764 checksum = checksum + scarray[i]; 9765 if (checksum == 0 9766 || (checksum & 0xFFFF) != sc->checksum) { 9767 return (0); 9768 } else { 9769 return (1); 9770 } 9771} 9772 9773int 9774ahd_acquire_seeprom(struct ahd_softc *ahd) 9775{ 9776 /* 9777 * We should be able to determine the SEEPROM type 9778 * from the flexport logic, but unfortunately not 9779 * all implementations have this logic and there is 9780 * no programatic method for determining if the logic 9781 * is present. 9782 */ 9783 return (1); 9784#if 0 9785 uint8_t seetype; 9786 int error; 9787 9788 error = ahd_read_flexport(ahd, FLXADDR_ROMSTAT_CURSENSECTL, &seetype); 9789 if (error != 0 9790 || ((seetype & FLX_ROMSTAT_SEECFG) == FLX_ROMSTAT_SEE_NONE)) 9791 return (0); 9792 return (1); 9793#endif 9794} 9795 9796void 9797ahd_release_seeprom(struct ahd_softc *ahd) 9798{ 9799 /* Currently a no-op */ 9800} 9801 9802int 9803ahd_write_flexport(struct ahd_softc *ahd, u_int addr, u_int value) 9804{ 9805 int error; 9806 9807 AHD_ASSERT_MODES(ahd, AHD_MODE_SCSI_MSK, AHD_MODE_SCSI_MSK); 9808 if (addr > 7) 9809 panic("ahd_write_flexport: address out of range"); 9810 ahd_outb(ahd, BRDCTL, BRDEN|(addr << 3)); 9811 error = ahd_wait_flexport(ahd); 9812 if (error != 0) 9813 return (error); 9814 ahd_outb(ahd, BRDDAT, value); 9815 ahd_flush_device_writes(ahd); 9816 ahd_outb(ahd, BRDCTL, BRDSTB|BRDEN|(addr << 3)); 9817 ahd_flush_device_writes(ahd); 9818 ahd_outb(ahd, BRDCTL, BRDEN|(addr << 3)); 9819 ahd_flush_device_writes(ahd); 9820 ahd_outb(ahd, BRDCTL, 0); 9821 ahd_flush_device_writes(ahd); 9822 return (0); 9823} 9824 9825int 9826ahd_read_flexport(struct ahd_softc *ahd, u_int addr, uint8_t *value) 9827{ 9828 int error; 9829 9830 AHD_ASSERT_MODES(ahd, AHD_MODE_SCSI_MSK, AHD_MODE_SCSI_MSK); 9831 if (addr > 7) 9832 panic("ahd_read_flexport: address out of range"); 9833 ahd_outb(ahd, BRDCTL, BRDRW|BRDEN|(addr << 3)); 9834 error = ahd_wait_flexport(ahd); 9835 if (error != 0) 9836 return (error); 9837 *value = ahd_inb(ahd, BRDDAT); 9838 ahd_outb(ahd, BRDCTL, 0); 9839 ahd_flush_device_writes(ahd); 9840 return (0); 9841} 9842 9843/* 9844 * Wait at most 2 seconds for flexport arbitration to succeed. 9845 */ 9846int 9847ahd_wait_flexport(struct ahd_softc *ahd) 9848{ 9849 int cnt; 9850 9851 AHD_ASSERT_MODES(ahd, AHD_MODE_SCSI_MSK, AHD_MODE_SCSI_MSK); 9852 cnt = 1000000 * 2 / 5; 9853 while ((ahd_inb(ahd, BRDCTL) & FLXARBACK) == 0 && --cnt) 9854 aic_delay(5); 9855 9856 if (cnt == 0) 9857 return (ETIMEDOUT); 9858 return (0); 9859} 9860 9861/************************* Target Mode ****************************************/ 9862#ifdef AHD_TARGET_MODE 9863cam_status 9864ahd_find_tmode_devs(struct ahd_softc *ahd, struct cam_sim *sim, union ccb *ccb, 9865 struct ahd_tmode_tstate **tstate, 9866 struct ahd_tmode_lstate **lstate, 9867 int notfound_failure) 9868{ 9869 9870 if ((ahd->features & AHD_TARGETMODE) == 0) 9871 return (CAM_REQ_INVALID); 9872 9873 /* 9874 * Handle the 'black hole' device that sucks up 9875 * requests to unattached luns on enabled targets. 9876 */ 9877 if (ccb->ccb_h.target_id == CAM_TARGET_WILDCARD 9878 && ccb->ccb_h.target_lun == CAM_LUN_WILDCARD) { 9879 *tstate = NULL; 9880 *lstate = ahd->black_hole; 9881 } else { 9882 u_int max_id; 9883 9884 max_id = (ahd->features & AHD_WIDE) ? 15 : 7; 9885 if (ccb->ccb_h.target_id > max_id) 9886 return (CAM_TID_INVALID); 9887 9888 if (ccb->ccb_h.target_lun >= AHD_NUM_LUNS) 9889 return (CAM_LUN_INVALID); 9890 9891 *tstate = ahd->enabled_targets[ccb->ccb_h.target_id]; 9892 *lstate = NULL; 9893 if (*tstate != NULL) 9894 *lstate = 9895 (*tstate)->enabled_luns[ccb->ccb_h.target_lun]; 9896 } 9897 9898 if (notfound_failure != 0 && *lstate == NULL) 9899 return (CAM_PATH_INVALID); 9900 9901 return (CAM_REQ_CMP); 9902} 9903 9904void 9905ahd_handle_en_lun(struct ahd_softc *ahd, struct cam_sim *sim, union ccb *ccb) 9906{ 9907#if NOT_YET 9908 struct ahd_tmode_tstate *tstate; 9909 struct ahd_tmode_lstate *lstate; 9910 struct ccb_en_lun *cel; 9911 cam_status status; 9912 u_int target; 9913 u_int lun; 9914 u_int target_mask; 9915 u_long s; 9916 char channel; 9917 9918 status = ahd_find_tmode_devs(ahd, sim, ccb, &tstate, &lstate, 9919 /*notfound_failure*/FALSE); 9920 9921 if (status != CAM_REQ_CMP) { 9922 ccb->ccb_h.status = status; 9923 return; 9924 } 9925 9926 if ((ahd->features & AHD_MULTIROLE) != 0) { 9927 u_int our_id; 9928 9929 our_id = ahd->our_id; 9930 if (ccb->ccb_h.target_id != our_id) { 9931 if ((ahd->features & AHD_MULTI_TID) != 0 9932 && (ahd->flags & AHD_INITIATORROLE) != 0) { 9933 /* 9934 * Only allow additional targets if 9935 * the initiator role is disabled. 9936 * The hardware cannot handle a re-select-in 9937 * on the initiator id during a re-select-out 9938 * on a different target id. 9939 */ 9940 status = CAM_TID_INVALID; 9941 } else if ((ahd->flags & AHD_INITIATORROLE) != 0 9942 || ahd->enabled_luns > 0) { 9943 /* 9944 * Only allow our target id to change 9945 * if the initiator role is not configured 9946 * and there are no enabled luns which 9947 * are attached to the currently registered 9948 * scsi id. 9949 */ 9950 status = CAM_TID_INVALID; 9951 } 9952 } 9953 } 9954 9955 if (status != CAM_REQ_CMP) { 9956 ccb->ccb_h.status = status; 9957 return; 9958 } 9959 9960 /* 9961 * We now have an id that is valid. 9962 * If we aren't in target mode, switch modes. 9963 */ 9964 if ((ahd->flags & AHD_TARGETROLE) == 0 9965 && ccb->ccb_h.target_id != CAM_TARGET_WILDCARD) { 9966 printf("Configuring Target Mode\n"); 9967 if (LIST_FIRST(&ahd->pending_scbs) != NULL) { 9968 ccb->ccb_h.status = CAM_BUSY; 9969 return; 9970 } 9971 ahd->flags |= AHD_TARGETROLE; 9972 if ((ahd->features & AHD_MULTIROLE) == 0) 9973 ahd->flags &= ~AHD_INITIATORROLE; 9974 ahd_pause(ahd); 9975 ahd_loadseq(ahd); 9976 ahd_restart(ahd); 9977 } 9978 cel = &ccb->cel; 9979 target = ccb->ccb_h.target_id; 9980 lun = ccb->ccb_h.target_lun; 9981 channel = SIM_CHANNEL(ahd, sim); 9982 target_mask = 0x01 << target; 9983 if (channel == 'B') 9984 target_mask <<= 8; 9985 9986 if (cel->enable != 0) { 9987 u_int scsiseq1; 9988 9989 /* Are we already enabled?? */ 9990 if (lstate != NULL) { 9991 xpt_print_path(ccb->ccb_h.path); 9992 printf("Lun already enabled\n"); 9993 AHD_CORRECTABLE_ERROR(ahd); 9994 ccb->ccb_h.status = CAM_LUN_ALRDY_ENA; 9995 return; 9996 } 9997 9998 if (cel->grp6_len != 0 9999 || cel->grp7_len != 0) { 10000 /* 10001 * Don't (yet?) support vendor 10002 * specific commands. 10003 */ 10004 ccb->ccb_h.status = CAM_REQ_INVALID; 10005 printf("Non-zero Group Codes\n"); 10006 return; 10007 } 10008 10009 /* 10010 * Seems to be okay. 10011 * Setup our data structures. 10012 */ 10013 if (target != CAM_TARGET_WILDCARD && tstate == NULL) { 10014 tstate = ahd_alloc_tstate(ahd, target, channel); 10015 if (tstate == NULL) { 10016 xpt_print_path(ccb->ccb_h.path); 10017 printf("Couldn't allocate tstate\n"); 10018 ccb->ccb_h.status = CAM_RESRC_UNAVAIL; 10019 return; 10020 } 10021 } 10022 lstate = malloc(sizeof(*lstate), M_DEVBUF, M_NOWAIT); 10023 if (lstate == NULL) { 10024 xpt_print_path(ccb->ccb_h.path); 10025 printf("Couldn't allocate lstate\n"); 10026 ccb->ccb_h.status = CAM_RESRC_UNAVAIL; 10027 return; 10028 } 10029 memset(lstate, 0, sizeof(*lstate)); 10030 status = xpt_create_path(&lstate->path, /*periph*/NULL, 10031 xpt_path_path_id(ccb->ccb_h.path), 10032 xpt_path_target_id(ccb->ccb_h.path), 10033 xpt_path_lun_id(ccb->ccb_h.path)); 10034 if (status != CAM_REQ_CMP) { 10035 free(lstate, M_DEVBUF); 10036 xpt_print_path(ccb->ccb_h.path); 10037 printf("Couldn't allocate path\n"); 10038 ccb->ccb_h.status = CAM_RESRC_UNAVAIL; 10039 return; 10040 } 10041 SLIST_INIT(&lstate->accept_tios); 10042 SLIST_INIT(&lstate->immed_notifies); 10043 ahd_pause(ahd); 10044 if (target != CAM_TARGET_WILDCARD) { 10045 tstate->enabled_luns[lun] = lstate; 10046 ahd->enabled_luns++; 10047 10048 if ((ahd->features & AHD_MULTI_TID) != 0) { 10049 u_int targid_mask; 10050 10051 targid_mask = ahd_inw(ahd, TARGID); 10052 targid_mask |= target_mask; 10053 ahd_outw(ahd, TARGID, targid_mask); 10054 ahd_update_scsiid(ahd, targid_mask); 10055 } else { 10056 u_int our_id; 10057 char channel; 10058 10059 channel = SIM_CHANNEL(ahd, sim); 10060 our_id = SIM_SCSI_ID(ahd, sim); 10061 10062 /* 10063 * This can only happen if selections 10064 * are not enabled 10065 */ 10066 if (target != our_id) { 10067 u_int sblkctl; 10068 char cur_channel; 10069 int swap; 10070 10071 sblkctl = ahd_inb(ahd, SBLKCTL); 10072 cur_channel = (sblkctl & SELBUSB) 10073 ? 'B' : 'A'; 10074 if ((ahd->features & AHD_TWIN) == 0) 10075 cur_channel = 'A'; 10076 swap = cur_channel != channel; 10077 ahd->our_id = target; 10078 10079 if (swap) 10080 ahd_outb(ahd, SBLKCTL, 10081 sblkctl ^ SELBUSB); 10082 10083 ahd_outb(ahd, SCSIID, target); 10084 10085 if (swap) 10086 ahd_outb(ahd, SBLKCTL, sblkctl); 10087 } 10088 } 10089 } else 10090 ahd->black_hole = lstate; 10091 /* Allow select-in operations */ 10092 if (ahd->black_hole != NULL && ahd->enabled_luns > 0) { 10093 scsiseq1 = ahd_inb(ahd, SCSISEQ_TEMPLATE); 10094 scsiseq1 |= ENSELI; 10095 ahd_outb(ahd, SCSISEQ_TEMPLATE, scsiseq1); 10096 scsiseq1 = ahd_inb(ahd, SCSISEQ1); 10097 scsiseq1 |= ENSELI; 10098 ahd_outb(ahd, SCSISEQ1, scsiseq1); 10099 } 10100 ahd_unpause(ahd); 10101 ccb->ccb_h.status = CAM_REQ_CMP; 10102 xpt_print_path(ccb->ccb_h.path); 10103 printf("Lun now enabled for target mode\n"); 10104 } else { 10105 struct scb *scb; 10106 int i, empty; 10107 10108 if (lstate == NULL) { 10109 ccb->ccb_h.status = CAM_LUN_INVALID; 10110 return; 10111 } 10112 10113 ccb->ccb_h.status = CAM_REQ_CMP; 10114 LIST_FOREACH(scb, &ahd->pending_scbs, pending_links) { 10115 struct ccb_hdr *ccbh; 10116 10117 ccbh = &scb->io_ctx->ccb_h; 10118 if (ccbh->func_code == XPT_CONT_TARGET_IO 10119 && !xpt_path_comp(ccbh->path, ccb->ccb_h.path)){ 10120 printf("CTIO pending\n"); 10121 ccb->ccb_h.status = CAM_REQ_INVALID; 10122 return; 10123 } 10124 } 10125 10126 if (SLIST_FIRST(&lstate->accept_tios) != NULL) { 10127 printf("ATIOs pending\n"); 10128 ccb->ccb_h.status = CAM_REQ_INVALID; 10129 } 10130 10131 if (SLIST_FIRST(&lstate->immed_notifies) != NULL) { 10132 printf("INOTs pending\n"); 10133 ccb->ccb_h.status = CAM_REQ_INVALID; 10134 } 10135 10136 if (ccb->ccb_h.status != CAM_REQ_CMP) { 10137 return; 10138 } 10139 10140 xpt_print_path(ccb->ccb_h.path); 10141 printf("Target mode disabled\n"); 10142 xpt_free_path(lstate->path); 10143 free(lstate, M_DEVBUF); 10144 10145 ahd_pause(ahd); 10146 /* Can we clean up the target too? */ 10147 if (target != CAM_TARGET_WILDCARD) { 10148 tstate->enabled_luns[lun] = NULL; 10149 ahd->enabled_luns--; 10150 for (empty = 1, i = 0; i < 8; i++) 10151 if (tstate->enabled_luns[i] != NULL) { 10152 empty = 0; 10153 break; 10154 } 10155 10156 if (empty) { 10157 ahd_free_tstate(ahd, target, channel, 10158 /*force*/FALSE); 10159 if (ahd->features & AHD_MULTI_TID) { 10160 u_int targid_mask; 10161 10162 targid_mask = ahd_inw(ahd, TARGID); 10163 targid_mask &= ~target_mask; 10164 ahd_outw(ahd, TARGID, targid_mask); 10165 ahd_update_scsiid(ahd, targid_mask); 10166 } 10167 } 10168 } else { 10169 10170 ahd->black_hole = NULL; 10171 10172 /* 10173 * We can't allow selections without 10174 * our black hole device. 10175 */ 10176 empty = TRUE; 10177 } 10178 if (ahd->enabled_luns == 0) { 10179 /* Disallow select-in */ 10180 u_int scsiseq1; 10181 10182 scsiseq1 = ahd_inb(ahd, SCSISEQ_TEMPLATE); 10183 scsiseq1 &= ~ENSELI; 10184 ahd_outb(ahd, SCSISEQ_TEMPLATE, scsiseq1); 10185 scsiseq1 = ahd_inb(ahd, SCSISEQ1); 10186 scsiseq1 &= ~ENSELI; 10187 ahd_outb(ahd, SCSISEQ1, scsiseq1); 10188 10189 if ((ahd->features & AHD_MULTIROLE) == 0) { 10190 printf("Configuring Initiator Mode\n"); 10191 ahd->flags &= ~AHD_TARGETROLE; 10192 ahd->flags |= AHD_INITIATORROLE; 10193 ahd_pause(ahd); 10194 ahd_loadseq(ahd); 10195 ahd_restart(ahd); 10196 /* 10197 * Unpaused. The extra unpause 10198 * that follows is harmless. 10199 */ 10200 } 10201 } 10202 ahd_unpause(ahd); 10203 } 10204#endif 10205} 10206 10207static void 10208ahd_update_scsiid(struct ahd_softc *ahd, u_int targid_mask) 10209{ 10210#if NOT_YET 10211 u_int scsiid_mask; 10212 u_int scsiid; 10213 10214 if ((ahd->features & AHD_MULTI_TID) == 0) 10215 panic("ahd_update_scsiid called on non-multitid unit\n"); 10216 10217 /* 10218 * Since we will rely on the TARGID mask 10219 * for selection enables, ensure that OID 10220 * in SCSIID is not set to some other ID 10221 * that we don't want to allow selections on. 10222 */ 10223 if ((ahd->features & AHD_ULTRA2) != 0) 10224 scsiid = ahd_inb(ahd, SCSIID_ULTRA2); 10225 else 10226 scsiid = ahd_inb(ahd, SCSIID); 10227 scsiid_mask = 0x1 << (scsiid & OID); 10228 if ((targid_mask & scsiid_mask) == 0) { 10229 u_int our_id; 10230 10231 /* ffs counts from 1 */ 10232 our_id = ffs(targid_mask); 10233 if (our_id == 0) 10234 our_id = ahd->our_id; 10235 else 10236 our_id--; 10237 scsiid &= TID; 10238 scsiid |= our_id; 10239 } 10240 if ((ahd->features & AHD_ULTRA2) != 0) 10241 ahd_outb(ahd, SCSIID_ULTRA2, scsiid); 10242 else 10243 ahd_outb(ahd, SCSIID, scsiid); 10244#endif 10245} 10246 10247void 10248ahd_run_tqinfifo(struct ahd_softc *ahd, int paused) 10249{ 10250 struct target_cmd *cmd; 10251 10252 ahd_sync_tqinfifo(ahd, BUS_DMASYNC_POSTREAD); 10253 while ((cmd = &ahd->targetcmds[ahd->tqinfifonext])->cmd_valid != 0) { 10254 10255 /* 10256 * Only advance through the queue if we 10257 * have the resources to process the command. 10258 */ 10259 if (ahd_handle_target_cmd(ahd, cmd) != 0) 10260 break; 10261 10262 cmd->cmd_valid = 0; 10263 ahd_dmamap_sync(ahd, ahd->shared_data_dmat, 10264 ahd->shared_data_dmamap, 10265 ahd_targetcmd_offset(ahd, ahd->tqinfifonext), 10266 sizeof(struct target_cmd), 10267 BUS_DMASYNC_PREREAD); 10268 ahd->tqinfifonext++; 10269 10270 /* 10271 * Lazily update our position in the target mode incoming 10272 * command queue as seen by the sequencer. 10273 */ 10274 if ((ahd->tqinfifonext & (HOST_TQINPOS - 1)) == 1) { 10275 u_int hs_mailbox; 10276 10277 hs_mailbox = ahd_inb(ahd, HS_MAILBOX); 10278 hs_mailbox &= ~HOST_TQINPOS; 10279 hs_mailbox |= ahd->tqinfifonext & HOST_TQINPOS; 10280 ahd_outb(ahd, HS_MAILBOX, hs_mailbox); 10281 } 10282 } 10283} 10284 10285static int 10286ahd_handle_target_cmd(struct ahd_softc *ahd, struct target_cmd *cmd) 10287{ 10288 struct ahd_tmode_tstate *tstate; 10289 struct ahd_tmode_lstate *lstate; 10290 struct ccb_accept_tio *atio; 10291 uint8_t *byte; 10292 int initiator; 10293 int target; 10294 int lun; 10295 10296 initiator = SCSIID_TARGET(ahd, cmd->scsiid); 10297 target = SCSIID_OUR_ID(cmd->scsiid); 10298 lun = (cmd->identify & MSG_IDENTIFY_LUNMASK); 10299 10300 byte = cmd->bytes; 10301 tstate = ahd->enabled_targets[target]; 10302 lstate = NULL; 10303 if (tstate != NULL) 10304 lstate = tstate->enabled_luns[lun]; 10305 10306 /* 10307 * Commands for disabled luns go to the black hole driver. 10308 */ 10309 if (lstate == NULL) 10310 lstate = ahd->black_hole; 10311 10312 atio = (struct ccb_accept_tio*)SLIST_FIRST(&lstate->accept_tios); 10313 if (atio == NULL) { 10314 ahd->flags |= AHD_TQINFIFO_BLOCKED; 10315 /* 10316 * Wait for more ATIOs from the peripheral driver for this lun. 10317 */ 10318 return (1); 10319 } else 10320 ahd->flags &= ~AHD_TQINFIFO_BLOCKED; 10321#ifdef AHD_DEBUG 10322 if ((ahd_debug & AHD_SHOW_TQIN) != 0) 10323 printf("Incoming command from %d for %d:%d%s\n", 10324 initiator, target, lun, 10325 lstate == ahd->black_hole ? "(Black Holed)" : ""); 10326#endif 10327 SLIST_REMOVE_HEAD(&lstate->accept_tios, sim_links.sle); 10328 10329 if (lstate == ahd->black_hole) { 10330 /* Fill in the wildcards */ 10331 atio->ccb_h.target_id = target; 10332 atio->ccb_h.target_lun = lun; 10333 } 10334 10335 /* 10336 * Package it up and send it off to 10337 * whomever has this lun enabled. 10338 */ 10339 atio->sense_len = 0; 10340 atio->init_id = initiator; 10341 if (byte[0] != 0xFF) { 10342 /* Tag was included */ 10343 atio->tag_action = *byte++; 10344 atio->tag_id = *byte++; 10345 atio->ccb_h.flags = CAM_TAG_ACTION_VALID; 10346 } else { 10347 atio->ccb_h.flags = 0; 10348 } 10349 byte++; 10350 10351 /* Okay. Now determine the cdb size based on the command code */ 10352 switch (*byte >> CMD_GROUP_CODE_SHIFT) { 10353 case 0: 10354 atio->cdb_len = 6; 10355 break; 10356 case 1: 10357 case 2: 10358 atio->cdb_len = 10; 10359 break; 10360 case 4: 10361 atio->cdb_len = 16; 10362 break; 10363 case 5: 10364 atio->cdb_len = 12; 10365 break; 10366 case 3: 10367 default: 10368 /* Only copy the opcode. */ 10369 atio->cdb_len = 1; 10370 printf("Reserved or VU command code type encountered\n"); 10371 break; 10372 } 10373 10374 memcpy(atio->cdb_io.cdb_bytes, byte, atio->cdb_len); 10375 10376 atio->ccb_h.status |= CAM_CDB_RECVD; 10377 10378 if ((cmd->identify & MSG_IDENTIFY_DISCFLAG) == 0) { 10379 /* 10380 * We weren't allowed to disconnect. 10381 * We're hanging on the bus until a 10382 * continue target I/O comes in response 10383 * to this accept tio. 10384 */ 10385#ifdef AHD_DEBUG 10386 if ((ahd_debug & AHD_SHOW_TQIN) != 0) 10387 printf("Received Immediate Command %d:%d:%d - %p\n", 10388 initiator, target, lun, ahd->pending_device); 10389#endif 10390 ahd->pending_device = lstate; 10391 ahd_freeze_ccb((union ccb *)atio); 10392 atio->ccb_h.flags |= CAM_DIS_DISCONNECT; 10393 } 10394 xpt_done((union ccb*)atio); 10395 return (0); 10396} 10397 10398#endif 10399