1#!/bin/sh 2 3# This is rc.conf - a file full of useful variables that you can set 4# to change the default startup behavior of your system. You should 5# not edit this file! Put any overrides into one of the ${rc_conf_files} 6# instead and you will be able to update these defaults later without 7# spamming your local configuration information. 8# 9# The ${rc_conf_files} files should only contain values which override 10# values set in this file. This eases the upgrade path when defaults 11# are changed and new features are added. 12# 13# All arguments must be in double or single quotes. 14# 15# For a more detailed explanation of all the rc.conf variables, please 16# refer to the rc.conf(5) manual page. 17# 18# $FreeBSD$ 19 20############################################################## 21### Important initial Boot-time options #################### 22############################################################## 23 24# rc_debug can't be set here without interferring with rc.subr's setting it 25# when the kenv variable rc.debug is set. 26#rc_debug="NO" # Set to YES to enable debugging output from rc.d 27rc_info="NO" # Enables display of informational messages at boot. 28rc_startmsgs="YES" # Show "Starting foo:" messages at boot 29rcshutdown_timeout="90" # Seconds to wait before terminating rc.shutdown 30early_late_divider="FILESYSTEMS" # Script that separates early/late 31 # stages of the boot process. Make sure you know 32 # the ramifications if you change this. 33 # See rc.conf(5) for more details. 34always_force_depends="NO" # Set to check that indicated dependencies are 35 # running during boot (can increase boot time). 36 37apm_enable="NO" # Set to YES to enable APM BIOS functions (or NO). 38apmd_enable="NO" # Run apmd to handle APM event from userland. 39apmd_flags="" # Flags to apmd (if enabled). 40ddb_enable="NO" # Set to YES to load ddb scripts at boot. 41ddb_config="/etc/ddb.conf" # ddb(8) config file. 42devd_enable="YES" # Run devd, to trigger programs on device tree changes. 43devd_flags="" # Additional flags for devd(8). 44devmatch_enable="YES" # Demand load kernel modules based on device ids. 45devmatch_blacklist="" # List of modules (w/o .ko) to exclude from devmatch. 46#kld_list="" # Kernel modules to load after local disks are mounted 47kldxref_enable="YES" # Build linker.hints files with kldxref(8). 48kldxref_clobber="NO" # Overwrite old linker.hints at boot. 49kldxref_module_path="" # Override kern.module_path. A ';'-delimited list. 50powerd_enable="NO" # Run powerd to lower our power usage. 51powerd_flags="" # Flags to powerd (if enabled). 52tmpmfs="AUTO" # Set to YES to always create an mfs /tmp, NO to never 53tmpsize="20m" # Size of mfs /tmp if created 54tmpmfs_flags="-S" # Extra mdmfs options for the mfs /tmp 55varmfs="AUTO" # Set to YES to always create an mfs /var, NO to never 56varsize="32m" # Size of mfs /var if created 57varmfs_flags="-S" # Extra mount options for the mfs /var 58mfs_type="auto" # "md", "tmpfs", "auto" to prefer tmpfs with md as fallback 59populate_var="AUTO" # Set to YES to always (re)populate /var, NO to never 60cleanvar_enable="YES" # Clean the /var directory 61local_startup="/usr/local/etc/rc.d" # startup script dirs. 62script_name_sep=" " # Change if your startup scripts' names contain spaces 63rc_conf_files="/etc/rc.conf /etc/rc.conf.local" 64 65# ZFS support 66zfs_enable="NO" # Set to YES to automatically mount ZFS file systems 67 68# ZFSD support 69zfsd_enable="NO" # Set to YES to automatically start the ZFS fault 70 # management daemon. 71 72gptboot_enable="YES" # GPT boot success/failure reporting. 73 74# Experimental - test before enabling 75gbde_autoattach_all="NO" # YES automatically mounts gbde devices from fstab 76gbde_devices="NO" # Devices to automatically attach (list, or AUTO) 77gbde_attach_attempts="3" # Number of times to attempt attaching gbde devices 78gbde_lockdir="/etc" # Where to look for gbde lockfiles 79 80# GELI disk encryption configuration. 81geli_devices="" # List of devices to automatically attach in addition to 82 # GELI devices listed in /etc/fstab. 83geli_groups="" # List of groups containing devices to automatically 84 # attach with the same keyfiles and passphrase 85geli_tries="" # Number of times to attempt attaching geli device. 86 # If empty, kern.geom.eli.tries will be used. 87geli_default_flags="" # Default flags for geli(8). 88geli_autodetach="YES" # Automatically detach on last close. 89 # Providers are marked as such when all file systems are 90 # mounted. 91# Example use. 92#geli_devices="da1 mirror/home" 93#geli_da1_flags="-p -k /etc/geli/da1.keys" 94#geli_da1_autodetach="NO" 95#geli_mirror_home_flags="-k /etc/geli/home.keys" 96#geli_groups="storage backup" 97#geli_storage_flags="-k /etc/geli/storage.keys" 98#geli_storage_devices="ada0 ada1" 99#geli_backup_flags="-j /etc/geli/backup.passfile -k /etc/geli/backup.keys" 100#geli_backup_devices="ada2 ada3" 101 102root_rw_mount="YES" # Set to NO to inhibit remounting root read-write. 103root_hold_delay="30" # Time to wait for root mount hold release. 104fsck_y_enable="NO" # Set to YES to do fsck -y if the initial preen fails. 105fsck_y_flags="-T ffs:-R -T ufs:-R" # Additional flags for fsck -y 106background_fsck="YES" # Attempt to run fsck in the background where possible. 107background_fsck_delay="60" # Time to wait (seconds) before starting the fsck. 108growfs_enable="NO" # Set to YES to attempt to grow the root filesystem on boot 109netfs_types="nfs:NFS smbfs:SMB" # Net filesystems. 110extra_netfs_types="NO" # List of network extra filesystem types for delayed 111 # mount at startup (or NO). 112 113############################################################## 114### Network configuration sub-section ###################### 115############################################################## 116 117### Basic network and firewall/security options: ### 118hostname="" # Set this! 119hostid_enable="YES" # Set host UUID. 120hostid_file="/etc/hostid" # File with hostuuid. 121nisdomainname="NO" # Set to NIS domain if using NIS (or NO). 122dhclient_program="/sbin/dhclient" # Path to dhcp client program. 123dhclient_flags="" # Extra flags to pass to dhcp client. 124#dhclient_flags_fxp0="" # Extra dhclient flags for fxp0 only 125background_dhclient="NO" # Start dhcp client in the background. 126#background_dhclient_fxp0="YES" # Start dhcp client on fxp0 in the background. 127synchronous_dhclient="NO" # Start dhclient directly on configured 128 # interfaces during startup. 129defaultroute_delay="30" # Time to wait for a default route on a DHCP interface. 130defaultroute_carrier_delay="5" # Time to wait for carrier while waiting for a default route. 131netif_enable="YES" # Set to YES to initialize network interfaces 132netif_ipexpand_max="2048" # Maximum number of IP addrs in a range spec. 133wpa_supplicant_program="/usr/sbin/wpa_supplicant" 134wpa_supplicant_flags="-s" # Extra flags to pass to wpa_supplicant 135wpa_supplicant_conf_file="/etc/wpa_supplicant.conf" 136# 137firewall_enable="NO" # Set to YES to enable firewall functionality 138firewall_script="/etc/rc.firewall" # Which script to run to set up the firewall 139firewall_type="UNKNOWN" # Firewall type (see /etc/rc.firewall) 140firewall_quiet="NO" # Set to YES to suppress rule display 141firewall_logging="NO" # Set to YES to enable events logging 142firewall_logif="NO" # Set to YES to create logging-pseudo interface 143firewall_flags="" # Flags passed to ipfw when type is a file 144firewall_coscripts="" # List of executables/scripts to run after 145 # firewall starts/stops 146firewall_client_net="192.0.2.0/24" # IPv4 Network address for "client" 147 # firewall. 148#firewall_client_net_ipv6="2001:db8:2:1::/64" # IPv6 network prefix for 149 # "client" firewall. 150firewall_simple_iif="ed1" # Inside network interface for "simple" 151 # firewall. 152firewall_simple_inet="192.0.2.16/28" # Inside network address for "simple" 153 # firewall. 154firewall_simple_oif="ed0" # Outside network interface for "simple" 155 # firewall. 156firewall_simple_onet="192.0.2.0/28" # Outside network address for "simple" 157 # firewall. 158#firewall_simple_iif_ipv6="ed1" # Inside IPv6 network interface for "simple" 159 # firewall. 160#firewall_simple_inet_ipv6="2001:db8:2:800::/56" # Inside IPv6 network prefix 161 # for "simple" firewall. 162#firewall_simple_oif_ipv6="ed0" # Outside IPv6 network interface for "simple" 163 # firewall. 164#firewall_simple_onet_ipv6="2001:db8:2:0::/56" # Outside IPv6 network prefix 165 # for "simple" firewall. 166firewall_myservices="" # List of ports/protocols on which this host 167 # offers services for "workstation" firewall. 168firewall_allowservices="" # List of IPs which have access to 169 # $firewall_myservices for "workstation" 170 # firewall. 171firewall_trusted="" # List of IPs which have full access to this 172 # host for "workstation" firewall. 173firewall_logdeny="NO" # Set to YES to log default denied incoming 174 # packets for "workstation" firewall. 175firewall_nologports="135-139,445 1026,1027 1433,1434" # List of TCP/UDP ports 176 # for which denied incoming packets are not 177 # logged for "workstation" firewall. 178firewall_nat_enable="NO" # Enable kernel NAT (if firewall_enable == YES) 179firewall_nat_interface="" # Public interface or IPaddress to use 180firewall_nat_flags="" # Additional configuration parameters 181firewall_nat64_enable="NO" # Enable kernel NAT64 module. 182firewall_nptv6_enable="NO" # Enable kernel NPTv6 module. 183firewall_pmod_enable="NO" # Enable kernel protocols modification module. 184dummynet_enable="NO" # Load the dummynet(4) module 185ipfw_netflow_enable="NO" # Enable netflow logging via ng_netflow 186ip_portrange_first="NO" # Set first dynamically allocated port 187ip_portrange_last="NO" # Set last dynamically allocated port 188ike_enable="NO" # Enable IKE daemon (usually racoon or isakmpd) 189ike_program="/usr/local/sbin/isakmpd" # Path to IKE daemon 190ike_flags="" # Additional flags for IKE daemon 191ipsec_enable="NO" # Set to YES to run setkey on ipsec_file 192ipsec_file="/etc/ipsec.conf" # Name of config file for setkey 193natd_program="/sbin/natd" # path to natd, if you want a different one. 194natd_enable="NO" # Enable natd (if firewall_enable == YES). 195natd_interface="" # Public interface or IPaddress to use. 196natd_flags="" # Additional flags for natd. 197ipfilter_enable="NO" # Set to YES to enable ipfilter functionality 198ipfilter_program="/sbin/ipf" # where the ipfilter program lives 199ipfilter_rules="/etc/ipf.rules" # rules definition file for ipfilter, see 200 # /usr/src/contrib/ipfilter/rules for examples 201ipfilter_flags="" # additional flags for ipfilter 202ippool_enable="NO" # Set to YES to enable ip filter pools 203ippool_program="/sbin/ippool" # where the ippool program lives 204ippool_rules="/etc/ippool.tables" # rules definition file for ippool 205ippool_flags="" # additional flags for ippool 206ipnat_enable="NO" # Set to YES to enable ipnat functionality 207ipnat_program="/sbin/ipnat" # where the ipnat program lives 208ipnat_rules="/etc/ipnat.rules" # rules definition file for ipnat 209ipnat_flags="" # additional flags for ipnat 210ipmon_enable="NO" # Set to YES for ipmon; needs ipfilter or ipnat 211ipmon_program="/sbin/ipmon" # where the ipfilter monitor program lives 212ipmon_flags="-Ds" # typically "-Ds" or "-D /var/log/ipflog" 213ipfs_enable="NO" # Set to YES to enable saving and restoring 214 # of state tables at shutdown and boot 215ipfs_program="/sbin/ipfs" # where the ipfs program lives 216ipfs_flags="" # additional flags for ipfs 217pf_enable="NO" # Set to YES to enable packet filter (pf) 218pf_rules="/etc/pf.conf" # rules definition file for pf (nonexistent 219 # by default) 220pf_program="/sbin/pfctl" # where the pfctl program lives 221pf_flags="" # additional flags for pfctl 222pflog_enable="NO" # Set to YES to enable packet filter logging 223pflog_logfile="/var/log/pflog" # where pflogd should store the logfile 224pflog_program="/sbin/pflogd" # where the pflogd program lives 225pflog_flags="" # additional flags for pflogd 226ftpproxy_enable="NO" # Set to YES to enable ftp-proxy(8) for pf 227ftpproxy_flags="" # additional flags for ftp-proxy(8) 228pfsync_enable="NO" # Expose pf state to other hosts for syncing 229pfsync_syncdev="" # Interface for pfsync to work through 230pfsync_syncpeer="" # IP address of pfsync peer host 231pfsync_ifconfig="" # Additional options to ifconfig(8) for pfsync 232tcp_extensions="YES" # Set to NO to turn off RFC1323 extensions. 233log_in_vain="0" # >=1 to log connects to ports w/o listeners. 234tcp_keepalive="YES" # Enable stale TCP connection timeout (or NO). 235tcp_drop_synfin="NO" # Set to YES to drop TCP packets with SYN+FIN 236 # NOTE: this violates the TCP specification 237icmp_drop_redirect="NO" # Set to YES to ignore ICMP REDIRECT packets 238icmp_log_redirect="NO" # Set to YES to log ICMP REDIRECT packets 239network_interfaces="auto" # List of network interfaces (or "auto"). 240cloned_interfaces="" # List of cloned network interfaces to create. 241#cloned_interfaces="gif0 gif1 gif2 gif3" # Pre-cloning GENERIC config. 242#ifconfig_lo0="inet 127.0.0.1" # default loopback device configuration. 243#ifconfig_lo0_alias0="inet 127.0.0.254 netmask 0xffffffff" # Sample alias entry. 244#ifconfig_ed0_ipv6="inet6 2001:db8:1::1 prefixlen 64" # Sample IPv6 addr entry 245#ifconfig_ed0_alias0="inet6 2001:db8:2::1 prefixlen 64" # Sample IPv6 alias 246#ifconfig_fxp0_name="net0" # Change interface name from fxp0 to net0. 247#vlans_fxp0="101 vlan0" # vlan(4) interfaces for fxp0 device 248#create_args_vlan0="vlan 102" # vlan tag for vlan0 device 249#wlans_ath0="wlan0" # wlan(4) interfaces for ath0 device 250#wlandebug_wlan0="scan+auth+assoc" # Set debug flags with wlandebug(8) 251#ipv4_addrs_fxp0="192.168.0.1/24 192.168.1.1-5/28" # example IPv4 address entry. 252# 253#autobridge_interfaces="bridge0" # List of bridges to check 254#autobridge_bridge0="tap* vlan0" # Interface glob to automatically add to the bridge 255# 256# If you have any sppp(4) interfaces above, you might also want to set 257# the following parameters. Refer to spppcontrol(8) for their meaning. 258sppp_interfaces="" # List of sppp interfaces. 259#sppp_interfaces="...0" # example: sppp over ... 260#spppconfig_...0="authproto=chap myauthname=foo myauthsecret='top secret' hisauthname=some-gw hisauthsecret='another secret'" 261 262# User ppp configuration. 263ppp_enable="NO" # Start user-ppp (or NO). 264ppp_program="/usr/sbin/ppp" # Path to user-ppp program. 265ppp_mode="auto" # Choice of "auto", "ddial", "direct" or "dedicated". 266 # For details see man page for ppp(8). Default is auto. 267ppp_nat="YES" # Use PPP's internal network address translation or NO. 268ppp_profile="papchap" # Which profile to use from /etc/ppp/ppp.conf. 269ppp_user="root" # Which user to run ppp as 270 271# Start multiple instances of ppp at boot time 272#ppp_profile="profile1 profile2 profile3" # Which profiles to use 273#ppp_profile1_mode="ddial" # Override ppp mode for profile1 274#ppp_profile2_nat="NO" # Override nat mode for profile2 275# profile3 uses default ppp_mode and ppp_nat 276 277### Network daemon (miscellaneous) ### 278hostapd_program="/usr/sbin/hostapd" 279hostapd_enable="NO" # Run hostap daemon. 280syslogd_enable="YES" # Run syslog daemon (or NO). 281syslogd_program="/usr/sbin/syslogd" # path to syslogd, if you want a different one. 282syslogd_flags="-s" # Flags to syslogd (if enabled). 283syslogd_oomprotect="YES" # Don't kill syslogd when swap space is exhausted. 284altlog_proglist="" # List of chrooted applicatioins in /var 285inetd_enable="NO" # Run the network daemon dispatcher (YES/NO). 286inetd_program="/usr/sbin/inetd" # path to inetd, if you want a different one. 287inetd_flags="-wW -C 60" # Optional flags to inetd 288iscsid_enable="NO" # iSCSI initiator daemon. 289iscsictl_enable="NO" # iSCSI initiator autostart. 290iscsictl_flags="-Aa" # Optional flags to iscsictl. 291hastd_enable="NO" # Run the HAST daemon (YES/NO). 292hastd_program="/sbin/hastd" # path to hastd, if you want a different one. 293hastd_flags="" # Optional flags to hastd. 294ctld_enable="NO" # CAM Target Layer / iSCSI target daemon. 295local_unbound_enable="NO" # Local caching resolver 296local_unbound_tls="NO" # Use DNS over TLS 297blacklistd_enable="NO" # Run blacklistd daemon (YES/NO). 298blacklistd_flags="" # Optional flags for blacklistd(8). 299resolv_enable="YES" # Enable resolv / resolvconf 300 301# 302# kerberos. Do not run the admin daemons on slave servers 303# 304kdc_enable="NO" # Run a kerberos 5 KDC (or NO). 305kdc_program="/usr/libexec/kdc" # path to kerberos 5 KDC 306kdc_flags="" # Additional flags to the kerberos 5 KDC 307kadmind_enable="NO" # Run kadmind (or NO) 308kadmind_program="/usr/libexec/kadmind" # path to kadmind 309kpasswdd_enable="NO" # Run kpasswdd (or NO) 310kpasswdd_program="/usr/libexec/kpasswdd" # path to kpasswdd 311kfd_enable="NO" # Run kfd (or NO) 312kfd_program="/usr/libexec/kfd" # path to kerberos 5 kfd daemon 313kfd_flags="" 314ipropd_master_enable="NO" # Run Heimdal incremental propagation daemon 315 # (master daemon). 316ipropd_master_program="/usr/libexec/ipropd-master" 317ipropd_master_flags="" # Flags to ipropd-master. 318ipropd_master_keytab="/etc/krb5.keytab" # keytab for ipropd-master. 319ipropd_master_slaves="" # slave node names used for /var/heimdal/slaves. 320ipropd_slave_enable="NO" # Run Heimdal incremental propagation daemon 321 # (slave daemon). 322ipropd_slave_program="/usr/libexec/ipropd-slave" 323ipropd_slave_flags="" # Flags to ipropd-slave. 324ipropd_slave_keytab="/etc/krb5.keytab" # keytab for ipropd-slave. 325ipropd_slave_master="" # master node name. 326 327gssd_enable="NO" # Run the gssd daemon (or NO). 328gssd_program="/usr/sbin/gssd" # Path to gssd. 329gssd_flags="" # Flags for gssd. 330 331rwhod_enable="NO" # Run the rwho daemon (or NO). 332rwhod_flags="" # Flags for rwhod 333rarpd_enable="NO" # Run rarpd (or NO). 334rarpd_flags="-a" # Flags to rarpd. 335bootparamd_enable="NO" # Run bootparamd (or NO). 336bootparamd_flags="" # Flags to bootparamd 337pppoed_enable="NO" # Run the PPP over Ethernet daemon. 338pppoed_provider="*" # Provider and ppp(8) config file entry. 339pppoed_flags="-P /var/run/pppoed.pid" # Flags to pppoed (if enabled). 340pppoed_interface="fxp0" # The interface that pppoed runs on. 341sshd_enable="NO" # Enable sshd 342sshd_program="/usr/sbin/sshd" # path to sshd, if you want a different one. 343sshd_flags="" # Additional flags for sshd. 344ftpd_enable="NO" # Enable stand-alone ftpd. 345ftpd_program="/usr/libexec/ftpd" # Path to ftpd, if you want a different one. 346ftpd_flags="" # Additional flags to stand-alone ftpd. 347 348### Network daemon (NFS): All need rpcbind_enable="YES" ### 349amd_enable="NO" # Run amd service with $amd_flags (or NO). 350amd_program="/usr/sbin/amd" # path to amd, if you want a different one. 351amd_flags="-a /.amd_mnt -l syslog /host /etc/amd.map /net /etc/amd.map" 352amd_map_program="NO" # Can be set to "ypcat -k amd.master" 353autofs_enable="NO" # Run autofs daemons. 354automount_flags="" # Flags to automount(8) (if autofs enabled). 355automountd_flags="" # Flags to automountd(8) (if autofs enabled). 356autounmountd_flags="" # Flags to autounmountd(8) (if autofs enabled). 357nfs_client_enable="NO" # This host is an NFS client (or NO). 358nfs_access_cache="60" # Client cache timeout in seconds 359nfs_server_enable="NO" # This host is an NFS server (or NO). 360nfs_server_flags="-u -t" # Flags to nfsd (if enabled). 361nfs_server_managegids="NO" # The NFS server maps gids for AUTH_SYS (or NO). 362mountd_enable="NO" # Run mountd (or NO). 363mountd_flags="-r -S" # Flags to mountd (if NFS server enabled). 364weak_mountd_authentication="NO" # Allow non-root mount requests to be served. 365nfs_reserved_port_only="NO" # Provide NFS only on secure port (or NO). 366nfs_bufpackets="" # bufspace (in packets) for client 367rpc_lockd_enable="NO" # Run NFS rpc.lockd needed for client/server. 368rpc_lockd_flags="" # Flags to rpc.lockd (if enabled). 369rpc_statd_enable="NO" # Run NFS rpc.statd needed for client/server. 370rpc_statd_flags="" # Flags to rpc.statd (if enabled). 371rpcbind_enable="NO" # Run the portmapper service (YES/NO). 372rpcbind_program="/usr/sbin/rpcbind" # path to rpcbind, if you want a different one. 373rpcbind_flags="" # Flags to rpcbind (if enabled). 374rpc_ypupdated_enable="NO" # Run if NIS master and SecureRPC (or NO). 375keyserv_enable="NO" # Run the SecureRPC keyserver (or NO). 376keyserv_flags="" # Flags to keyserv (if enabled). 377nfsv4_server_enable="NO" # Enable support for NFSv4 378nfsv4_server_only="NO" # Set NFS server to NFSv4 only 379nfscbd_enable="NO" # NFSv4 client side callback daemon 380nfscbd_flags="" # Flags for nfscbd 381nfsuserd_enable="NO" # NFSv4 user/group name mapping daemon 382nfsuserd_flags="" # Flags for nfsuserd 383 384### Network Time Services options: ### 385timed_enable="NO" # Run the time daemon (or NO). 386timed_flags="" # Flags to timed (if enabled). 387ntpdate_enable="NO" # Run ntpdate to sync time on boot (or NO). 388ntpdate_program="/usr/sbin/ntpdate" # path to ntpdate, if you want a different one. 389ntpdate_flags="-b" # Flags to ntpdate (if enabled). 390ntpdate_config="/etc/ntp.conf" # ntpdate(8) configuration file 391ntpdate_hosts="" # Whitespace-separated list of ntpdate(8) servers. 392ntpd_enable="NO" # Run ntpd Network Time Protocol (or NO). 393ntpd_program="/usr/sbin/ntpd" # path to ntpd, if you want a different one. 394ntpd_config="/etc/ntp.conf" # ntpd(8) configuration file 395ntpd_sync_on_start="NO" # Sync time on ntpd startup, even if offset is high 396ntpd_flags="" # Additional flags to ntpd 397ntp_src_leapfile="/etc/ntp/leap-seconds" 398 # Initial source for ntpd leapfile 399ntp_db_leapfile="/var/db/ntpd.leap-seconds.list" 400 # Working copy (updated weekly) leapfile 401ntp_leapfile_sources="https://www.ietf.org/timezones/data/leap-seconds.list" 402 # Source from which to fetch leapfile 403ntp_leapfile_fetch_opts="-mq" # Options to use for ntp leapfile fetch, 404 # e.g. --no-verify-peer 405ntp_leapfile_expiry_days=30 # Check for new leapfile 30 days prior to 406 # expiry. 407ntp_leapfile_fetch_verbose="NO" # Be verbose during NTP leapfile fetch 408 409# Network Information Services (NIS) options: All need rpcbind_enable="YES" ### 410nis_client_enable="NO" # We're an NIS client (or NO). 411nis_client_flags="" # Flags to ypbind (if enabled). 412nis_ypset_enable="NO" # Run ypset at boot time (or NO). 413nis_ypset_flags="" # Flags to ypset (if enabled). 414nis_server_enable="NO" # We're an NIS server (or NO). 415nis_server_flags="" # Flags to ypserv (if enabled). 416nis_ypxfrd_enable="NO" # Run rpc.ypxfrd at boot time (or NO). 417nis_ypxfrd_flags="" # Flags to rpc.ypxfrd (if enabled). 418nis_yppasswdd_enable="NO" # Run rpc.yppasswdd at boot time (or NO). 419nis_yppasswdd_flags="" # Flags to rpc.yppasswdd (if enabled). 420nis_ypldap_enable="NO" # Run ypldap at boot time (or NO). 421nis_ypldap_flags="" # Flags to ypldap (if enabled). 422 423### SNMP daemon ### 424# Be sure to understand the security implications of running SNMP v1/v2 425# in your network. 426bsnmpd_enable="NO" # Run the SNMP daemon (or NO). 427bsnmpd_flags="" # Flags for bsnmpd. 428 429### Network routing options: ### 430defaultrouter="NO" # Set to default gateway (or NO). 431static_arp_pairs="" # Set to static ARP list (or leave empty). 432static_ndp_pairs="" # Set to static NDP list (or leave empty). 433static_routes="" # Set to static route list (or leave empty). 434gateway_enable="NO" # Set to YES if this host will be a gateway. 435routed_enable="NO" # Set to YES to enable a routing daemon. 436routed_program="/sbin/routed" # Name of routing daemon to use if enabled. 437routed_flags="-q" # Flags for routing daemon. 438arpproxy_all="NO" # replaces obsolete kernel option ARP_PROXYALL. 439forward_sourceroute="NO" # do source routing (only if gateway_enable is set to "YES") 440accept_sourceroute="NO" # accept source routed packets to us 441 442### Bluetooth ### 443hcsecd_enable="NO" # Enable hcsecd(8) (or NO) 444hcsecd_config="/etc/bluetooth/hcsecd.conf" # hcsecd(8) configuration file 445 446sdpd_enable="NO" # Enable sdpd(8) (or NO) 447sdpd_control="/var/run/sdp" # sdpd(8) control socket 448sdpd_groupname="nobody" # set spdp(8) user/group to run as after 449sdpd_username="nobody" # it initializes 450 451bthidd_enable="NO" # Enable bthidd(8) (or NO) 452bthidd_config="/etc/bluetooth/bthidd.conf" # bthidd(8) configuration file 453bthidd_hids="/var/db/bthidd.hids" # bthidd(8) known HID devices file 454bthidd_evdev_support="AUTO" # AUTO depends on EVDEV_SUPPORT kernel option 455 456rfcomm_pppd_server_enable="NO" # Enable rfcomm_pppd(8) in server mode (or NO) 457rfcomm_pppd_server_profile="one two" # Profile to use from /etc/ppp/ppp.conf 458# 459#rfcomm_pppd_server_one_bdaddr="" # Override local bdaddr for 'one' 460rfcomm_pppd_server_one_channel="1" # Override local channel for 'one' 461#rfcomm_pppd_server_one_register_sp="NO" # Override SP and DUN register 462#rfcomm_pppd_server_one_register_dun="NO" # for 'one' 463# 464#rfcomm_pppd_server_two_bdaddr="" # Override local bdaddr for 'two' 465rfcomm_pppd_server_two_channel="3" # Override local channel for 'two' 466#rfcomm_pppd_server_two_register_sp="NO" # Override SP and DUN register 467#rfcomm_pppd_server_two_register_dun="NO" # for 'two' 468 469ubthidhci_enable="NO" # Switch an USB BT controller present on 470#ubthidhci_busnum="3" # bus 3 and addr 2 from HID mode to HCI mode. 471#ubthidhci_addr="2" # Check usbconfig list to find the correct 472 # numbers for your system. 473 474### Network link/usability verification options 475netwait_enable="NO" # Enable rc.d/netwait (or NO) 476#netwait_ip="" # Wait for ping response from any IP in this list. 477netwait_timeout="60" # Total number of seconds to perform pings. 478#netwait_if="" # Wait for active link on each intf in this list. 479netwait_if_timeout="30" # Total number of seconds to monitor link state. 480 481### Miscellaneous network options: ### 482icmp_bmcastecho="NO" # respond to broadcast ping packets 483 484### IPv6 options: ### 485ipv6_network_interfaces="auto" # List of IPv6 network interfaces 486 # (or "auto" or "none"). 487ipv6_activate_all_interfaces="NO" # If NO, interfaces which have no 488 # corresponding $ifconfig_IF_ipv6 is 489 # marked as IFDISABLED for security 490 # reason. 491ipv6_defaultrouter="NO" # Set to IPv6 default gateway (or NO). 492#ipv6_defaultrouter="2002:c058:6301::" # Use this for 6to4 (RFC 3068) 493ipv6_static_routes="" # Set to static route list (or leave empty). 494#ipv6_static_routes="xxx" # An example to set fec0:0000:0000:0006::/64 495 # route toward loopback interface. 496#ipv6_route_xxx="fec0:0000:0000:0006:: -prefixlen 64 ::1" 497ipv6_gateway_enable="NO" # Set to YES if this host will be a gateway. 498ipv6_cpe_wanif="NO" # Set to the upstream interface name if this 499 # node will work as a router to forward IPv6 500 # packets not explicitly addressed to itself. 501ipv6_privacy="NO" # Use privacy address on RA-receiving IFs 502 # (RFC 4941) 503 504route6d_enable="NO" # Set to YES to enable an IPv6 routing daemon. 505route6d_program="/usr/sbin/route6d" # Name of IPv6 routing daemon. 506route6d_flags="" # Flags to IPv6 routing daemon. 507#route6d_flags="-l" # Example for route6d with only IPv6 site local 508 # addrs. 509#route6d_flags="-q" # If you want to run a routing daemon on an end 510 # node, you should stop advertisement. 511#ipv6_network_interfaces="ed0 ep0" # Examples for router 512 # or static configuration for end node. 513 # Choose correct prefix value. 514#ipv6_prefix_ed0="fec0:0000:0000:0001 fec0:0000:0000:0002" # Examples for rtr. 515#ipv6_prefix_ep0="fec0:0000:0000:0003 fec0:0000:0000:0004" # Examples for rtr. 516ipv6_default_interface="NO" # Default output interface for scoped addrs. 517 # This works only with 518 # ipv6_gateway_enable="NO". 519rtsol_flags="" # Flags to IPv6 router solicitation. 520rtsold_enable="NO" # Set to YES to enable an IPv6 router 521 # solicitation daemon. 522rtsold_flags="-a" # Flags to an IPv6 router solicitation 523 # daemon. 524rtadvd_enable="NO" # Set to YES to enable an IPv6 router 525 # advertisement daemon. If set to YES, 526 # this router becomes a possible candidate 527 # IPv6 default router for local subnets. 528rtadvd_interfaces="" # Interfaces rtadvd sends RA packets. 529stf_interface_ipv4addr="" # Local IPv4 addr for 6to4 IPv6 over IPv4 530 # tunneling interface. Specify this entry 531 # to enable 6to4 interface. 532stf_interface_ipv4plen="0" # Prefix length for 6to4 IPv4 addr, 533 # to limit peer addr range. Effective value 534 # is 0-31. 535stf_interface_ipv6_ifid="0:0:0:1" # IPv6 interface id for stf0. 536 # If you like, you can set "AUTO" for this. 537stf_interface_ipv6_slaid="0000" # IPv6 Site Level Aggregator for stf0 538ipv6_ipv4mapping="NO" # Set to "YES" to enable IPv4 mapped IPv6 addr 539 # communication. (like ::ffff:a.b.c.d) 540ipv6_ipfilter_rules="/etc/ipf6.rules" # rules definition file for ipfilter, 541 # see /usr/src/contrib/ipfilter/rules 542 # for examples 543ip6addrctl_enable="YES" # Set to YES to enable default address selection 544ip6addrctl_verbose="NO" # Set to YES to enable verbose configuration messages 545ip6addrctl_policy="AUTO" # A pre-defined address selection policy 546 # (ipv4_prefer, ipv6_prefer, or AUTO) 547 548############################################################## 549### System console options ################################# 550############################################################## 551 552keyboard="" # keyboard device to use (default /dev/kbd0). 553keymap="NO" # keymap in /usr/share/{syscons,vt}/keymaps/* (or NO). 554keyrate="NO" # keyboard rate to: slow, normal, fast (or NO). 555keybell="NO" # See kbdcontrol(1) for options. Use "off" to disable. 556keychange="NO" # function keys default values (or NO). 557cursor="NO" # cursor type {normal|blink|destructive} (or NO). 558scrnmap="NO" # screen map in /usr/share/syscons/scrnmaps/* (or NO). 559font8x16="NO" # font 8x16 from /usr/share/{syscons,vt}/fonts/* (or NO). 560font8x14="NO" # font 8x14 from /usr/share/{syscons,vt}/fonts/* (or NO). 561font8x8="NO" # font 8x8 from /usr/share/{syscons,vt}/fonts/* (or NO). 562blanktime="300" # blank time (in seconds) or "NO" to turn it off. 563saver="NO" # screen saver: Uses /boot/kernel/${saver}_saver.ko 564moused_nondefault_enable="YES" # Treat non-default mice as enabled unless 565 # specifically overriden in rc.conf(5). 566moused_enable="NO" # Run the mouse daemon. 567moused_type="auto" # See man page for rc.conf(5) for available settings. 568moused_port="/dev/psm0" # Set to your mouse port. 569moused_flags="" # Any additional flags to moused. 570mousechar_start="NO" # if 0xd0-0xd3 default range is occupied in your 571 # language code table, specify alternative range 572 # start like mousechar_start=3, see vidcontrol(1) 573allscreens_flags="" # Set this vidcontrol mode for all virtual screens 574allscreens_kbdflags="" # Set this kbdcontrol mode for all virtual screens 575 576############################################################## 577### Mail Transfer Agent (MTA) options ###################### 578############################################################## 579 580mta_start_script="/etc/rc.sendmail" 581 # Script to start your chosen MTA, called by /etc/rc. 582# Settings for /etc/rc.sendmail and /etc/rc.d/sendmail: 583sendmail_enable="NO" # Run the sendmail inbound daemon (YES/NO). 584sendmail_pidfile="/var/run/sendmail.pid" # sendmail pid file 585sendmail_procname="/usr/sbin/sendmail" # sendmail process name 586sendmail_flags="-L sm-mta -bd -q30m" # Flags to sendmail (as a server) 587sendmail_cert_create="YES" # Create a server certificate if none (YES/NO) 588#sendmail_cert_cn="CN" # CN of the generate certificate 589sendmail_submit_enable="YES" # Start a localhost-only MTA for mail submission 590sendmail_submit_flags="-L sm-mta -bd -q30m -ODaemonPortOptions=Addr=localhost" 591 # Flags for localhost-only MTA 592sendmail_outbound_enable="YES" # Dequeue stuck mail (YES/NO). 593sendmail_outbound_flags="-L sm-queue -q30m" # Flags to sendmail (outbound only) 594sendmail_msp_queue_enable="YES" # Dequeue stuck clientmqueue mail (YES/NO). 595sendmail_msp_queue_flags="-L sm-msp-queue -Ac -q30m" 596 # Flags for sendmail_msp_queue daemon. 597sendmail_rebuild_aliases="NO" # Run newaliases if necessary (YES/NO). 598 599 600############################################################## 601### Miscellaneous administrative options ################### 602############################################################## 603 604auditd_enable="NO" # Run the audit daemon. 605auditd_program="/usr/sbin/auditd" # Path to the audit daemon. 606auditd_flags="" # Which options to pass to the audit daemon. 607auditdistd_enable="NO" # Run the audit daemon. 608auditdistd_program="/usr/sbin/auditdistd" # Path to the auditdistd daemon. 609auditdistd_flags="" # Which options to pass to the auditdistd daemon. 610cron_enable="YES" # Run the periodic job daemon. 611cron_program="/usr/sbin/cron" # Which cron executable to run (if enabled). 612cron_dst="YES" # Handle DST transitions intelligently (YES/NO) 613cron_flags="" # Which options to pass to the cron daemon. 614cfumass_enable="NO" # Create default LUN for cfumass(4). 615cfumass_dir="/var/cfumass" # File to LUN's contents. 616cfumass_image="/var/tmp/cfumass.img" # LUN's backing file path. 617lpd_enable="NO" # Run the line printer daemon. 618lpd_program="/usr/sbin/lpd" # path to lpd, if you want a different one. 619lpd_flags="" # Flags to lpd (if enabled). 620nscd_enable="NO" # Run the nsswitch caching daemon. 621chkprintcap_enable="NO" # Run chkprintcap(8) before running lpd. 622chkprintcap_flags="-d" # Create missing directories by default. 623dumpdev="NO" # Device to crashdump to (device name, AUTO, or NO). 624dumpon_flags="" # Options to pass to dumpon(8), followed by dumpdev. 625dumpdir="/var/crash" # Directory where crash dumps are to be stored 626savecore_enable="YES" # Extract core from dump devices if any 627savecore_flags="-m 10" # Used if dumpdev is enabled above, and present. 628 # By default, only the 10 most recent kernel dumps 629 # are saved. 630service_delete_empty="NO" # Have 'service delete' remove empty rc.conf.d files. 631crashinfo_enable="YES" # Automatically generate crash dump summary. 632crashinfo_program="/usr/sbin/crashinfo" # Script to generate crash dump summary. 633quota_enable="NO" # turn on quotas on startup (or NO). 634check_quotas="YES" # Check quotas on startup (or NO). 635quotaon_flags="-a" # Turn quotas on for all file systems (if enabled) 636quotaoff_flags="-a" # Turn quotas off for all file systems at shutdown 637quotacheck_flags="-a" # Check all file system quotas (if enabled) 638accounting_enable="NO" # Turn on process accounting (or NO). 639ibcs2_enable="NO" # Ibcs2 (SCO) emulation loaded at startup (or NO). 640ibcs2_loaders="coff" # List of additional Ibcs2 loaders (or NO). 641firstboot_sentinel="/firstboot" # Scripts with "firstboot" keyword are run if 642 # this file exists. Should be on a R/W filesystem so 643 # the file can be deleted after the boot completes. 644sysvipc_enable="NO" # Load System V IPC primitives at startup (or NO). 645linux_enable="NO" # Linux binary compatibility loaded at startup (or NO). 646linux_mounts_enable="YES" # If linux_enable is set to YES, mount Linux-specific 647 # filesystems at startup. 648clear_tmp_enable="NO" # Clear /tmp at startup. 649clear_tmp_X="YES" # Clear and recreate X11-related directories in /tmp 650ldconfig_insecure="NO" # Set to YES to disable ldconfig security checks 651ldconfig_paths="/usr/lib/compat /usr/local/lib /usr/local/lib/compat/pkg" 652 # shared library search paths 653ldconfig32_paths="/usr/lib32 /usr/lib32/compat" 654 # 32-bit compatibility shared library search paths 655ldconfigsoft_paths="/usr/libsoft /usr/libsoft/compat /usr/local/libsoft" 656 # soft float compatibility shared library search paths 657 # Note: temporarily with extra stuff for transition 658ldconfig_paths_aout="/usr/lib/compat/aout /usr/local/lib/aout" 659 # a.out shared library search paths 660ldconfig_local_dirs="/usr/local/libdata/ldconfig" 661 # Local directories with ldconfig configuration files. 662ldconfig_local32_dirs="/usr/local/libdata/ldconfig32" 663 # Local directories with 32-bit compatibility ldconfig 664 # configuration files. 665ldconfig_localsoft_dirs="/usr/local/libdata/ldconfigsoft" 666 # Local directories with soft float compatibility ldconfig 667 # configuration files. 668kern_securelevel_enable="NO" # kernel security level (see security(7)) 669kern_securelevel="-1" # range: -1..3 ; `-1' is the most insecure 670 # Note that setting securelevel to 0 will result 671 # in the system booting with securelevel set to 1, as 672 # init(8) will raise the level when rc(8) completes. 673update_motd="YES" # update version info in /etc/motd (or NO) 674entropy_boot_file="/boot/entropy" # Set to NO to disable very early 675 # (used at early boot time) entropy caching through reboots. 676entropy_file="/entropy" # Set to NO to disable late (used when going multi-user) 677 # entropy through reboots. 678 # /var/db/entropy-file is preferred if / is not avail. 679entropy_dir="/var/db/entropy" # Set to NO to disable caching entropy via cron. 680entropy_save_sz="4096" # Size of the entropy cache files. 681entropy_save_num="8" # Number of entropy cache files to save. 682harvest_mask="511" # Entropy device harvests all but the very invasive sources. 683 # (See 'sysctl kern.random.harvest' and random(4)) 684osrelease_enable="YES" # Update /var/run/os-release on boot (or NO). 685osrelease_file="/var/run/os-release" # File to update for os-release. 686osrelease_perms="444" # Default permission for os-release file. 687dmesg_enable="YES" # Save dmesg(8) to /var/run/dmesg.boot 688watchdogd_enable="NO" # Start the software watchdog daemon 689watchdogd_flags="" # Flags to watchdogd (if enabled) 690watchdogd_timeout="" # watchdogd timeout, overrides -t in watchdogd_flags 691watchdogd_shutdown_timeout="" # Timeout to use after watchdogd is stopped. 692 # Has effect only for system shutdown. 693 # Overrides -x in watchdogd_flags. 694devfs_rulesets="/etc/defaults/devfs.rules /etc/devfs.rules" # Files containing 695 # devfs(8) rules. 696devfs_system_ruleset="" # The name (NOT number) of a ruleset to apply to /dev 697devfs_set_rulesets="" # A list of /mount/dev=ruleset_name settings to 698 # apply (must be mounted already, i.e. fstab(5)) 699devfs_load_rulesets="YES" # Enable to always load the default rulesets 700performance_cx_lowest="NONE" # Online CPU idle state 701performance_cpu_freq="NONE" # Online CPU frequency 702economy_cx_lowest="Cmax" # Offline CPU idle state 703economy_cpu_freq="NONE" # Offline CPU frequency 704virecover_enable="YES" # Perform housekeeping for the vi(1) editor 705ugidfw_enable="NO" # Load mac_bsdextended(4) rules on boot 706bsdextended_script="/etc/rc.bsdextended" # Default mac_bsdextended(4) 707 # ruleset file. 708newsyslog_enable="YES" # Run newsyslog at startup. 709newsyslog_flags="-CN" # Newsyslog flags to create marked files 710mixer_enable="YES" # Run the sound mixer. 711opensm_enable="NO" # Opensm(8) for infiniband devices defaults to off 712 713# rctl(8) requires kernel options RACCT and RCTL 714rctl_enable="YES" # Load rctl(8) rules on boot 715rctl_rules="/etc/rctl.conf" # rctl(8) ruleset. See rctl.conf(5). 716 717iovctl_files="" # Config files for iovctl(8) 718 719############################################################## 720### Jail Configuration (see rc.conf(5) manual page) ########## 721############################################################## 722jail_enable="NO" # Set to NO to disable starting of any jails 723jail_conf="/etc/jail.conf" # Configuration file for jail(8) 724jail_confwarn="YES" # Prevent warning about obsolete per-jail configuration 725jail_parallel_start="NO" # Start jails in the background 726jail_list="" # Space separated list of names of jails 727jail_reverse_stop="NO" # Stop jails in reverse order 728 729############################################################## 730### Define source_rc_confs, the mechanism used by /etc/rc.* ## 731### scripts to source rc_conf_files overrides safely. ## 732############################################################## 733 734if [ -z "${source_rc_confs_defined}" ]; then 735 source_rc_confs_defined=yes 736 source_rc_confs() { 737 local i sourced_files 738 for i in ${rc_conf_files}; do 739 case ${sourced_files} in 740 *:$i:*) 741 ;; 742 *) 743 sourced_files="${sourced_files}:$i:" 744 if [ -r $i ]; then 745 . $i 746 fi 747 ;; 748 esac 749 done 750 # Re-do process to pick up [possibly] redefined $rc_conf_files 751 for i in ${rc_conf_files}; do 752 case ${sourced_files} in 753 *:$i:*) 754 ;; 755 *) 756 sourced_files="${sourced_files}:$i:" 757 if [ -r $i ]; then 758 . $i 759 fi 760 ;; 761 esac 762 done 763 } 764fi 765 766# Allow vendors to override FreeBSD defaults in /etc/default/rc.conf 767# without the need to carefully manage /etc/rc.conf. 768if [ -r /etc/defaults/vendor.conf ]; then 769 . /etc/defaults/vendor.conf 770fi 771