1/*-
2 * Copyright (c) 2000,2001 Jonathan Chen.
3 * All rights reserved.
4 *
5 * Redistribution and use in source and binary forms, with or without
6 * modification, are permitted provided that the following conditions
7 * are met:
8 * 1. Redistributions of source code must retain the above copyright
9 *    notice, this list of conditions, and the following disclaimer,
10 *    without modification, immediately at the beginning of the file.
11 * 2. Redistributions in binary form must reproduce the above copyright
12 *    notice, this list of conditions and the following disclaimer in
13 *    the documentation and/or other materials provided with the
14 *    distribution.
15 *
16 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
17 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
18 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
19 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
20 * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
21 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
22 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
23 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
24 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
25 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
26 * SUCH DAMAGE.
27 */
28
29#include <sys/cdefs.h>
30__FBSDID("$FreeBSD$");
31
32/*
33 * Driver for the TDK 78Q2120 MII
34 *
35 * References:
36 *   Datasheet for the 78Q2120 - http://www.tsc.tdk.com/lan/78q2120.pdf
37 *   Most of this code stolen from ukphy.c
38 */
39
40/*
41 * The TDK 78Q2120 is found on some Xircom X3201 based CardBus cards,
42 * also spotted on some 3C575 cards.  It's just like any other normal
43 * phy, except it does auto negotiation in a different way.
44 */
45
46#include <sys/param.h>
47#include <sys/systm.h>
48#include <sys/kernel.h>
49#include <sys/socket.h>
50#include <sys/errno.h>
51#include <sys/module.h>
52#include <sys/bus.h>
53
54#include <net/if.h>
55#include <net/if_media.h>
56
57#include <dev/mii/mii.h>
58#include <dev/mii/miivar.h>
59#include "miidevs.h"
60
61#include <dev/mii/tdkphyreg.h>
62
63#include "miibus_if.h"
64
65static int tdkphy_probe(device_t);
66static int tdkphy_attach(device_t);
67
68static device_method_t tdkphy_methods[] = {
69	/* device interface */
70	DEVMETHOD(device_probe,		tdkphy_probe),
71	DEVMETHOD(device_attach,	tdkphy_attach),
72	DEVMETHOD(device_detach,	mii_phy_detach),
73	DEVMETHOD(device_shutdown,	bus_generic_shutdown),
74	DEVMETHOD_END
75};
76
77static devclass_t tdkphy_devclass;
78
79static driver_t tdkphy_driver = {
80	"tdkphy",
81	tdkphy_methods,
82	sizeof(struct mii_softc)
83};
84
85DRIVER_MODULE(tdkphy, miibus, tdkphy_driver, tdkphy_devclass, 0, 0);
86
87static int tdkphy_service(struct mii_softc *, struct mii_data *, int);
88static void tdkphy_status(struct mii_softc *);
89
90static const struct mii_phydesc tdkphys[] = {
91	MII_PHY_DESC(xxTSC, 78Q2120),
92	MII_PHY_END
93};
94
95static const struct mii_phy_funcs tdkphy_funcs = {
96	tdkphy_service,
97	tdkphy_status,
98	mii_phy_reset
99};
100
101static int
102tdkphy_probe(device_t dev)
103{
104
105	return (mii_phy_dev_probe(dev, tdkphys, BUS_PROBE_DEFAULT));
106}
107
108static int
109tdkphy_attach(device_t dev)
110{
111
112	mii_phy_dev_attach(dev, MIIF_NOMANPAUSE, &tdkphy_funcs, 1);
113	return (0);
114}
115
116static int
117tdkphy_service(struct mii_softc *sc, struct mii_data *mii, int cmd)
118{
119
120	switch (cmd) {
121	case MII_POLLSTAT:
122		break;
123
124	case MII_MEDIACHG:
125		/*
126		 * If the interface is not up, don't do anything.
127		 */
128		if ((mii->mii_ifp->if_flags & IFF_UP) == 0)
129			break;
130
131		mii_phy_setmedia(sc);
132		break;
133
134	case MII_TICK:
135		if (mii_phy_tick(sc) == EJUSTRETURN)
136			return (0);
137		break;
138	}
139
140	/* Update the media status. */
141	PHY_STATUS(sc);
142	if (sc->mii_pdata->mii_media_active & IFM_FDX)
143		PHY_WRITE(sc, MII_BMCR, PHY_READ(sc, MII_BMCR) | BMCR_FDX);
144	else
145		PHY_WRITE(sc, MII_BMCR, PHY_READ(sc, MII_BMCR) & ~BMCR_FDX);
146
147	/* Callback if something changed. */
148	mii_phy_update(sc, cmd);
149	return (0);
150}
151
152static void
153tdkphy_status(struct mii_softc *phy)
154{
155	struct mii_data *mii = phy->mii_pdata;
156	struct ifmedia_entry *ife = mii->mii_media.ifm_cur;
157	int bmsr, bmcr, anlpar, diag;
158
159	mii->mii_media_status = IFM_AVALID;
160	mii->mii_media_active = IFM_ETHER;
161
162	bmsr = PHY_READ(phy, MII_BMSR) | PHY_READ(phy, MII_BMSR);
163	if (bmsr & BMSR_LINK)
164		mii->mii_media_status |= IFM_ACTIVE;
165
166	bmcr = PHY_READ(phy, MII_BMCR);
167	if (bmcr & BMCR_ISO) {
168		mii->mii_media_active |= IFM_NONE;
169		mii->mii_media_status = 0;
170		return;
171	}
172
173	if (bmcr & BMCR_LOOP)
174		mii->mii_media_active |= IFM_LOOP;
175
176	if (bmcr & BMCR_AUTOEN) {
177		/*
178		 * NWay autonegotiation takes the highest-order common
179		 * bit of the ANAR and ANLPAR (i.e. best media advertised
180		 * both by us and our link partner).
181		 */
182		if ((bmsr & BMSR_ACOMP) == 0) {
183			/* Erg, still trying, I guess... */
184			mii->mii_media_active |= IFM_NONE;
185			return;
186		}
187
188		anlpar = PHY_READ(phy, MII_ANAR) & PHY_READ(phy, MII_ANLPAR);
189		/*
190		 * ANLPAR doesn't get set on my card, but we check it anyway,
191		 * since it is mentioned in the 78Q2120 specs.
192		 */
193		if (anlpar & ANLPAR_TX_FD)
194			mii->mii_media_active |= IFM_100_TX|IFM_FDX;
195		else if (anlpar & ANLPAR_T4)
196			mii->mii_media_active |= IFM_100_T4|IFM_HDX;
197		else if (anlpar & ANLPAR_TX)
198			mii->mii_media_active |= IFM_100_TX|IFM_HDX;
199		else if (anlpar & ANLPAR_10_FD)
200			mii->mii_media_active |= IFM_10_T|IFM_FDX;
201		else if (anlpar & ANLPAR_10)
202			mii->mii_media_active |= IFM_10_T|IFM_HDX;
203		else {
204			/*
205			 * ANLPAR isn't set, which leaves two possibilities:
206			 * 1) Auto negotiation failed
207			 * 2) Auto negotiation completed, but the card forgot
208			 *    to set ANLPAR.
209			 * So we check the MII_DIAG(18) register...
210			 */
211			diag = PHY_READ(phy, MII_DIAG);
212			if (diag & DIAG_NEGFAIL) /* assume 10baseT if no neg */
213				mii->mii_media_active |= IFM_10_T|IFM_HDX;
214			else {
215				if (diag & DIAG_DUPLEX)
216					mii->mii_media_active |= IFM_FDX;
217				else
218					mii->mii_media_active |= IFM_HDX;
219				if (diag & DIAG_RATE_100)
220					mii->mii_media_active |= IFM_100_TX;
221				else
222					mii->mii_media_active |= IFM_10_T;
223			}
224		}
225		if ((mii->mii_media_active & IFM_FDX) != 0)
226			mii->mii_media_active |= mii_phy_flowstatus(phy);
227	} else
228		mii->mii_media_active = ife->ifm_media;
229}
230