1/* 2 * Copyright (c) 2002-2009 Sam Leffler, Errno Consulting 3 * Copyright (c) 2002-2008 Atheros Communications, Inc. 4 * 5 * Permission to use, copy, modify, and/or distribute this software for any 6 * purpose with or without fee is hereby granted, provided that the above 7 * copyright notice and this permission notice appear in all copies. 8 * 9 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES 10 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF 11 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR 12 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES 13 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN 14 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF 15 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. 16 * 17 * $FreeBSD$ 18 */ 19#include "opt_ah.h" 20 21#include "ah.h" 22#include "ah_internal.h" 23#include "ah_devid.h" 24 25#include "ar5212/ar5212.h" 26#include "ar5212/ar5212reg.h" 27#include "ar5212/ar5212phy.h" 28 29#define AH_5212_COMMON 30#include "ar5212/ar5212.ini" 31 32static void ar5212ConfigPCIE(struct ath_hal *ah, HAL_BOOL restore, 33 HAL_BOOL power_off); 34static void ar5212DisablePCIE(struct ath_hal *ah); 35 36static const struct ath_hal_private ar5212hal = {{ 37 .ah_magic = AR5212_MAGIC, 38 39 .ah_getRateTable = ar5212GetRateTable, 40 .ah_detach = ar5212Detach, 41 42 /* Reset Functions */ 43 .ah_reset = ar5212Reset, 44 .ah_phyDisable = ar5212PhyDisable, 45 .ah_disable = ar5212Disable, 46 .ah_configPCIE = ar5212ConfigPCIE, 47 .ah_disablePCIE = ar5212DisablePCIE, 48 .ah_setPCUConfig = ar5212SetPCUConfig, 49 .ah_perCalibration = ar5212PerCalibration, 50 .ah_perCalibrationN = ar5212PerCalibrationN, 51 .ah_resetCalValid = ar5212ResetCalValid, 52 .ah_setTxPowerLimit = ar5212SetTxPowerLimit, 53 .ah_getChanNoise = ath_hal_getChanNoise, 54 55 /* Transmit functions */ 56 .ah_updateTxTrigLevel = ar5212UpdateTxTrigLevel, 57 .ah_setupTxQueue = ar5212SetupTxQueue, 58 .ah_setTxQueueProps = ar5212SetTxQueueProps, 59 .ah_getTxQueueProps = ar5212GetTxQueueProps, 60 .ah_releaseTxQueue = ar5212ReleaseTxQueue, 61 .ah_resetTxQueue = ar5212ResetTxQueue, 62 .ah_getTxDP = ar5212GetTxDP, 63 .ah_setTxDP = ar5212SetTxDP, 64 .ah_numTxPending = ar5212NumTxPending, 65 .ah_startTxDma = ar5212StartTxDma, 66 .ah_stopTxDma = ar5212StopTxDma, 67 .ah_setupTxDesc = ar5212SetupTxDesc, 68 .ah_setupXTxDesc = ar5212SetupXTxDesc, 69 .ah_fillTxDesc = ar5212FillTxDesc, 70 .ah_procTxDesc = ar5212ProcTxDesc, 71 .ah_getTxIntrQueue = ar5212GetTxIntrQueue, 72 .ah_reqTxIntrDesc = ar5212IntrReqTxDesc, 73 .ah_getTxCompletionRates = ar5212GetTxCompletionRates, 74 .ah_setTxDescLink = ar5212SetTxDescLink, 75 .ah_getTxDescLink = ar5212GetTxDescLink, 76 .ah_getTxDescLinkPtr = ar5212GetTxDescLinkPtr, 77 78 /* RX Functions */ 79 .ah_getRxDP = ar5212GetRxDP, 80 .ah_setRxDP = ar5212SetRxDP, 81 .ah_enableReceive = ar5212EnableReceive, 82 .ah_stopDmaReceive = ar5212StopDmaReceive, 83 .ah_startPcuReceive = ar5212StartPcuReceive, 84 .ah_stopPcuReceive = ar5212StopPcuReceive, 85 .ah_setMulticastFilter = ar5212SetMulticastFilter, 86 .ah_setMulticastFilterIndex = ar5212SetMulticastFilterIndex, 87 .ah_clrMulticastFilterIndex = ar5212ClrMulticastFilterIndex, 88 .ah_getRxFilter = ar5212GetRxFilter, 89 .ah_setRxFilter = ar5212SetRxFilter, 90 .ah_setupRxDesc = ar5212SetupRxDesc, 91 .ah_procRxDesc = ar5212ProcRxDesc, 92 .ah_rxMonitor = ar5212RxMonitor, 93 .ah_aniPoll = ar5212AniPoll, 94 .ah_procMibEvent = ar5212ProcessMibIntr, 95 96 /* Misc Functions */ 97 .ah_getCapability = ar5212GetCapability, 98 .ah_setCapability = ar5212SetCapability, 99 .ah_getDiagState = ar5212GetDiagState, 100 .ah_getMacAddress = ar5212GetMacAddress, 101 .ah_setMacAddress = ar5212SetMacAddress, 102 .ah_getBssIdMask = ar5212GetBssIdMask, 103 .ah_setBssIdMask = ar5212SetBssIdMask, 104 .ah_setRegulatoryDomain = ar5212SetRegulatoryDomain, 105 .ah_setLedState = ar5212SetLedState, 106 .ah_writeAssocid = ar5212WriteAssocid, 107 .ah_gpioCfgInput = ar5212GpioCfgInput, 108 .ah_gpioCfgOutput = ar5212GpioCfgOutput, 109 .ah_gpioGet = ar5212GpioGet, 110 .ah_gpioSet = ar5212GpioSet, 111 .ah_gpioSetIntr = ar5212GpioSetIntr, 112 .ah_getTsf32 = ar5212GetTsf32, 113 .ah_getTsf64 = ar5212GetTsf64, 114 .ah_setTsf64 = ar5212SetTsf64, 115 .ah_resetTsf = ar5212ResetTsf, 116 .ah_detectCardPresent = ar5212DetectCardPresent, 117 .ah_updateMibCounters = ar5212UpdateMibCounters, 118 .ah_getRfGain = ar5212GetRfgain, 119 .ah_getDefAntenna = ar5212GetDefAntenna, 120 .ah_setDefAntenna = ar5212SetDefAntenna, 121 .ah_getAntennaSwitch = ar5212GetAntennaSwitch, 122 .ah_setAntennaSwitch = ar5212SetAntennaSwitch, 123 .ah_setSifsTime = ar5212SetSifsTime, 124 .ah_getSifsTime = ar5212GetSifsTime, 125 .ah_setSlotTime = ar5212SetSlotTime, 126 .ah_getSlotTime = ar5212GetSlotTime, 127 .ah_setAckTimeout = ar5212SetAckTimeout, 128 .ah_getAckTimeout = ar5212GetAckTimeout, 129 .ah_setAckCTSRate = ar5212SetAckCTSRate, 130 .ah_getAckCTSRate = ar5212GetAckCTSRate, 131 .ah_setCTSTimeout = ar5212SetCTSTimeout, 132 .ah_getCTSTimeout = ar5212GetCTSTimeout, 133 .ah_setDecompMask = ar5212SetDecompMask, 134 .ah_setCoverageClass = ar5212SetCoverageClass, 135 .ah_setQuiet = ar5212SetQuiet, 136 .ah_getMibCycleCounts = ar5212GetMibCycleCounts, 137 .ah_setChainMasks = ar5212SetChainMasks, 138 139 /* DFS Functions */ 140 .ah_enableDfs = ar5212EnableDfs, 141 .ah_getDfsThresh = ar5212GetDfsThresh, 142 .ah_getDfsDefaultThresh = ar5212GetDfsDefaultThresh, 143 .ah_procRadarEvent = ar5212ProcessRadarEvent, 144 .ah_isFastClockEnabled = ar5212IsFastClockEnabled, 145 .ah_get11nExtBusy = ar5212Get11nExtBusy, 146 147 /* Key Cache Functions */ 148 .ah_getKeyCacheSize = ar5212GetKeyCacheSize, 149 .ah_resetKeyCacheEntry = ar5212ResetKeyCacheEntry, 150 .ah_isKeyCacheEntryValid = ar5212IsKeyCacheEntryValid, 151 .ah_setKeyCacheEntry = ar5212SetKeyCacheEntry, 152 .ah_setKeyCacheEntryMac = ar5212SetKeyCacheEntryMac, 153 154 /* Power Management Functions */ 155 .ah_setPowerMode = ar5212SetPowerMode, 156 .ah_getPowerMode = ar5212GetPowerMode, 157 158 /* Beacon Functions */ 159 .ah_setBeaconTimers = ar5212SetBeaconTimers, 160 .ah_beaconInit = ar5212BeaconInit, 161 .ah_setStationBeaconTimers = ar5212SetStaBeaconTimers, 162 .ah_resetStationBeaconTimers = ar5212ResetStaBeaconTimers, 163 .ah_getNextTBTT = ar5212GetNextTBTT, 164 165 /* Interrupt Functions */ 166 .ah_isInterruptPending = ar5212IsInterruptPending, 167 .ah_getPendingInterrupts = ar5212GetPendingInterrupts, 168 .ah_getInterrupts = ar5212GetInterrupts, 169 .ah_setInterrupts = ar5212SetInterrupts }, 170 171 .ah_getChannelEdges = ar5212GetChannelEdges, 172 .ah_getWirelessModes = ar5212GetWirelessModes, 173 .ah_eepromRead = ar5212EepromRead, 174#ifdef AH_SUPPORT_WRITE_EEPROM 175 .ah_eepromWrite = ar5212EepromWrite, 176#endif 177 .ah_getChipPowerLimits = ar5212GetChipPowerLimits, 178}; 179 180uint32_t 181ar5212GetRadioRev(struct ath_hal *ah) 182{ 183 uint32_t val; 184 int i; 185 186 /* Read Radio Chip Rev Extract */ 187 OS_REG_WRITE(ah, AR_PHY(0x34), 0x00001c16); 188 for (i = 0; i < 8; i++) 189 OS_REG_WRITE(ah, AR_PHY(0x20), 0x00010000); 190 val = (OS_REG_READ(ah, AR_PHY(256)) >> 24) & 0xff; 191 val = ((val & 0xf0) >> 4) | ((val & 0x0f) << 4); 192 return ath_hal_reverseBits(val, 8); 193} 194 195static void 196ar5212AniSetup(struct ath_hal *ah) 197{ 198 static const struct ar5212AniParams aniparams = { 199 .maxNoiseImmunityLevel = 4, /* levels 0..4 */ 200 .totalSizeDesired = { -55, -55, -55, -55, -62 }, 201 .coarseHigh = { -14, -14, -14, -14, -12 }, 202 .coarseLow = { -64, -64, -64, -64, -70 }, 203 .firpwr = { -78, -78, -78, -78, -80 }, 204 .maxSpurImmunityLevel = 2, /* NB: depends on chip rev */ 205 .cycPwrThr1 = { 2, 4, 6, 8, 10, 12, 14, 16 }, 206 .maxFirstepLevel = 2, /* levels 0..2 */ 207 .firstep = { 0, 4, 8 }, 208 .ofdmTrigHigh = 500, 209 .ofdmTrigLow = 200, 210 .cckTrigHigh = 200, 211 .cckTrigLow = 100, 212 .rssiThrHigh = 40, 213 .rssiThrLow = 7, 214 .period = 100, 215 }; 216 if (AH_PRIVATE(ah)->ah_macVersion < AR_SREV_VERSION_GRIFFIN) { 217 struct ar5212AniParams tmp; 218 OS_MEMCPY(&tmp, &aniparams, sizeof(struct ar5212AniParams)); 219 tmp.maxSpurImmunityLevel = 7; /* Venice and earlier */ 220 ar5212AniAttach(ah, &tmp, &tmp, AH_TRUE); 221 } else 222 ar5212AniAttach(ah, &aniparams, &aniparams, AH_TRUE); 223 224 /* Set overridable ANI methods */ 225 AH5212(ah)->ah_aniControl = ar5212AniControl; 226} 227 228/* 229 * Attach for an AR5212 part. 230 */ 231void 232ar5212InitState(struct ath_hal_5212 *ahp, uint16_t devid, HAL_SOFTC sc, 233 HAL_BUS_TAG st, HAL_BUS_HANDLE sh, HAL_STATUS *status) 234{ 235#define N(a) (sizeof(a)/sizeof(a[0])) 236 static const uint8_t defbssidmask[IEEE80211_ADDR_LEN] = 237 { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff }; 238 struct ath_hal *ah; 239 240 ah = &ahp->ah_priv.h; 241 /* set initial values */ 242 OS_MEMCPY(&ahp->ah_priv, &ar5212hal, sizeof(struct ath_hal_private)); 243 ah->ah_sc = sc; 244 ah->ah_st = st; 245 ah->ah_sh = sh; 246 247 ah->ah_devid = devid; /* NB: for alq */ 248 AH_PRIVATE(ah)->ah_devid = devid; 249 AH_PRIVATE(ah)->ah_subvendorid = 0; /* XXX */ 250 251 AH_PRIVATE(ah)->ah_powerLimit = MAX_RATE_POWER; 252 AH_PRIVATE(ah)->ah_tpScale = HAL_TP_SCALE_MAX; /* no scaling */ 253 254 ahp->ah_antControl = HAL_ANT_VARIABLE; 255 ahp->ah_diversity = AH_TRUE; 256 ahp->ah_bIQCalibration = AH_FALSE; 257 /* 258 * Enable MIC handling. 259 */ 260 ahp->ah_staId1Defaults = AR_STA_ID1_CRPT_MIC_ENABLE; 261 ahp->ah_rssiThr = INIT_RSSI_THR; 262 ahp->ah_tpcEnabled = AH_FALSE; /* disabled by default */ 263 ahp->ah_phyPowerOn = AH_FALSE; 264 ahp->ah_macTPC = SM(MAX_RATE_POWER, AR_TPC_ACK) 265 | SM(MAX_RATE_POWER, AR_TPC_CTS) 266 | SM(MAX_RATE_POWER, AR_TPC_CHIRP); 267 ahp->ah_beaconInterval = 100; /* XXX [20..1000] */ 268 ahp->ah_enable32kHzClock = DONT_USE_32KHZ;/* XXX */ 269 ahp->ah_slottime = (u_int) -1; 270 ahp->ah_acktimeout = (u_int) -1; 271 ahp->ah_ctstimeout = (u_int) -1; 272 ahp->ah_sifstime = (u_int) -1; 273 ahp->ah_txTrigLev = INIT_TX_FIFO_THRESHOLD, 274 ahp->ah_maxTxTrigLev = MAX_TX_FIFO_THRESHOLD, 275 276 OS_MEMCPY(&ahp->ah_bssidmask, defbssidmask, IEEE80211_ADDR_LEN); 277#undef N 278} 279 280/* 281 * Validate MAC version and revision. 282 */ 283static HAL_BOOL 284ar5212IsMacSupported(uint8_t macVersion, uint8_t macRev) 285{ 286#define N(a) (sizeof(a)/sizeof(a[0])) 287 static const struct { 288 uint8_t version; 289 uint8_t revMin, revMax; 290 } macs[] = { 291 { AR_SREV_VERSION_VENICE, 292 AR_SREV_D2PLUS, AR_SREV_REVISION_MAX }, 293 { AR_SREV_VERSION_GRIFFIN, 294 AR_SREV_D2PLUS, AR_SREV_REVISION_MAX }, 295 { AR_SREV_5413, 296 AR_SREV_REVISION_MIN, AR_SREV_REVISION_MAX }, 297 { AR_SREV_5424, 298 AR_SREV_REVISION_MIN, AR_SREV_REVISION_MAX }, 299 { AR_SREV_2425, 300 AR_SREV_REVISION_MIN, AR_SREV_REVISION_MAX }, 301 { AR_SREV_2417, 302 AR_SREV_REVISION_MIN, AR_SREV_REVISION_MAX }, 303 }; 304 int i; 305 306 for (i = 0; i < N(macs); i++) 307 if (macs[i].version == macVersion && 308 macs[i].revMin <= macRev && macRev <= macs[i].revMax) 309 return AH_TRUE; 310 return AH_FALSE; 311#undef N 312} 313 314/* 315 * Attach for an AR5212 part. 316 */ 317static struct ath_hal * 318ar5212Attach(uint16_t devid, HAL_SOFTC sc, 319 HAL_BUS_TAG st, HAL_BUS_HANDLE sh, uint16_t *eepromdata, 320 HAL_STATUS *status) 321{ 322#define AH_EEPROM_PROTECT(ah) \ 323 (AH_PRIVATE(ah)->ah_ispcie)? AR_EEPROM_PROTECT_PCIE : AR_EEPROM_PROTECT) 324 struct ath_hal_5212 *ahp; 325 struct ath_hal *ah; 326 struct ath_hal_rf *rf; 327 uint32_t val; 328 uint16_t eeval; 329 HAL_STATUS ecode; 330 331 HALDEBUG(AH_NULL, HAL_DEBUG_ATTACH, "%s: sc %p st %p sh %p\n", 332 __func__, sc, (void*) st, (void*) sh); 333 334 /* NB: memory is returned zero'd */ 335 ahp = ath_hal_malloc(sizeof (struct ath_hal_5212)); 336 if (ahp == AH_NULL) { 337 HALDEBUG(AH_NULL, HAL_DEBUG_ANY, 338 "%s: cannot allocate memory for state block\n", __func__); 339 *status = HAL_ENOMEM; 340 return AH_NULL; 341 } 342 ar5212InitState(ahp, devid, sc, st, sh, status); 343 ah = &ahp->ah_priv.h; 344 345 if (!ar5212SetPowerMode(ah, HAL_PM_AWAKE, AH_TRUE)) { 346 HALDEBUG(ah, HAL_DEBUG_ANY, "%s: couldn't wakeup chip\n", 347 __func__); 348 ecode = HAL_EIO; 349 goto bad; 350 } 351 /* Read Revisions from Chips before taking out of reset */ 352 val = OS_REG_READ(ah, AR_SREV) & AR_SREV_ID; 353 AH_PRIVATE(ah)->ah_macVersion = val >> AR_SREV_ID_S; 354 AH_PRIVATE(ah)->ah_macRev = val & AR_SREV_REVISION; 355 AH_PRIVATE(ah)->ah_ispcie = IS_5424(ah) || IS_2425(ah); 356 357 if (!ar5212IsMacSupported(AH_PRIVATE(ah)->ah_macVersion, AH_PRIVATE(ah)->ah_macRev)) { 358 HALDEBUG(ah, HAL_DEBUG_ANY, 359 "%s: Mac Chip Rev 0x%02x.%x not supported\n" , 360 __func__, AH_PRIVATE(ah)->ah_macVersion, 361 AH_PRIVATE(ah)->ah_macRev); 362 ecode = HAL_ENOTSUPP; 363 goto bad; 364 } 365 366 /* setup common ini data; rf backends handle remainder */ 367 HAL_INI_INIT(&ahp->ah_ini_modes, ar5212Modes, 6); 368 HAL_INI_INIT(&ahp->ah_ini_common, ar5212Common, 2); 369 370 if (!ar5212ChipReset(ah, AH_NULL)) { /* reset chip */ 371 HALDEBUG(ah, HAL_DEBUG_ANY, "%s: chip reset failed\n", __func__); 372 ecode = HAL_EIO; 373 goto bad; 374 } 375 376 AH_PRIVATE(ah)->ah_phyRev = OS_REG_READ(ah, AR_PHY_CHIP_ID); 377 378 if (AH_PRIVATE(ah)->ah_ispcie) { 379 /* XXX: build flag to disable this? */ 380 ath_hal_configPCIE(ah, AH_FALSE, AH_FALSE); 381 } 382 383 if (!ar5212ChipTest(ah)) { 384 HALDEBUG(ah, HAL_DEBUG_ANY, "%s: hardware self-test failed\n", 385 __func__); 386 ecode = HAL_ESELFTEST; 387 goto bad; 388 } 389 390 /* Enable PCI core retry fix in software for Hainan and up */ 391 if (AH_PRIVATE(ah)->ah_macVersion >= AR_SREV_VERSION_VENICE) 392 OS_REG_SET_BIT(ah, AR_PCICFG, AR_PCICFG_RETRYFIXEN); 393 394 /* 395 * Set correct Baseband to analog shift 396 * setting to access analog chips. 397 */ 398 OS_REG_WRITE(ah, AR_PHY(0), 0x00000007); 399 400 /* Read Radio Chip Rev Extract */ 401 AH_PRIVATE(ah)->ah_analog5GhzRev = ar5212GetRadioRev(ah); 402 403 rf = ath_hal_rfprobe(ah, &ecode); 404 if (rf == AH_NULL) 405 goto bad; 406 407 /* NB: silently accept anything in release code per Atheros */ 408 switch (AH_PRIVATE(ah)->ah_analog5GhzRev & AR_RADIO_SREV_MAJOR) { 409 case AR_RAD5111_SREV_MAJOR: 410 case AR_RAD5112_SREV_MAJOR: 411 case AR_RAD2112_SREV_MAJOR: 412 case AR_RAD2111_SREV_MAJOR: 413 case AR_RAD2413_SREV_MAJOR: 414 case AR_RAD5413_SREV_MAJOR: 415 case AR_RAD5424_SREV_MAJOR: 416 break; 417 default: 418 if (AH_PRIVATE(ah)->ah_analog5GhzRev == 0) { 419 /* 420 * When RF_Silent is used, the 421 * analog chip is reset. So when the system boots 422 * up with the radio switch off we cannot determine 423 * the RF chip rev. To workaround this check the 424 * mac+phy revs and if Hainan, set the radio rev 425 * to Derby. 426 */ 427 if (AH_PRIVATE(ah)->ah_macVersion == AR_SREV_VERSION_VENICE && 428 AH_PRIVATE(ah)->ah_macRev == AR_SREV_HAINAN && 429 AH_PRIVATE(ah)->ah_phyRev == AR_PHYREV_HAINAN) { 430 AH_PRIVATE(ah)->ah_analog5GhzRev = AR_ANALOG5REV_HAINAN; 431 break; 432 } 433 if (IS_2413(ah)) { /* Griffin */ 434 AH_PRIVATE(ah)->ah_analog5GhzRev = 435 AR_RAD2413_SREV_MAJOR | 0x1; 436 break; 437 } 438 if (IS_5413(ah)) { /* Eagle */ 439 AH_PRIVATE(ah)->ah_analog5GhzRev = 440 AR_RAD5413_SREV_MAJOR | 0x2; 441 break; 442 } 443 if (IS_2425(ah) || IS_2417(ah)) {/* Swan or Nala */ 444 AH_PRIVATE(ah)->ah_analog5GhzRev = 445 AR_RAD5424_SREV_MAJOR | 0x2; 446 break; 447 } 448 } 449#ifdef AH_DEBUG 450 HALDEBUG(ah, HAL_DEBUG_ANY, 451 "%s: 5G Radio Chip Rev 0x%02X is not supported by " 452 "this driver\n", 453 __func__, AH_PRIVATE(ah)->ah_analog5GhzRev); 454 ecode = HAL_ENOTSUPP; 455 goto bad; 456#endif 457 } 458 if (IS_RAD5112_REV1(ah)) { 459 HALDEBUG(ah, HAL_DEBUG_ANY, 460 "%s: 5112 Rev 1 is not supported by this " 461 "driver (analog5GhzRev 0x%x)\n", __func__, 462 AH_PRIVATE(ah)->ah_analog5GhzRev); 463 ecode = HAL_ENOTSUPP; 464 goto bad; 465 } 466 467 val = OS_REG_READ(ah, AR_PCICFG); 468 val = MS(val, AR_PCICFG_EEPROM_SIZE); 469 if (val == 0) { 470 if (!AH_PRIVATE(ah)->ah_ispcie) { 471 HALDEBUG(ah, HAL_DEBUG_ANY, 472 "%s: unsupported EEPROM size %u (0x%x) found\n", 473 __func__, val, val); 474 ecode = HAL_EESIZE; 475 goto bad; 476 } 477 /* XXX AH_PRIVATE(ah)->ah_isPciExpress = AH_TRUE; */ 478 } else if (val != AR_PCICFG_EEPROM_SIZE_16K) { 479 if (AR_PCICFG_EEPROM_SIZE_FAILED == val) { 480 HALDEBUG(ah, HAL_DEBUG_ANY, 481 "%s: unsupported EEPROM size %u (0x%x) found\n", 482 __func__, val, val); 483 ecode = HAL_EESIZE; 484 goto bad; 485 } 486 HALDEBUG(ah, HAL_DEBUG_ANY, 487 "%s: EEPROM size = %d. Must be %d (16k).\n", 488 __func__, val, AR_PCICFG_EEPROM_SIZE_16K); 489 ecode = HAL_EESIZE; 490 goto bad; 491 } 492 ecode = ath_hal_legacyEepromAttach(ah); 493 if (ecode != HAL_OK) { 494 goto bad; 495 } 496 ahp->ah_isHb63 = IS_2425(ah) && ath_hal_eepromGetFlag(ah, AR_EEP_ISTALON); 497 498 /* 499 * If Bmode and AR5212, verify 2.4 analog exists 500 */ 501 if (ath_hal_eepromGetFlag(ah, AR_EEP_BMODE) && 502 (AH_PRIVATE(ah)->ah_analog5GhzRev & 0xF0) == AR_RAD5111_SREV_MAJOR) { 503 /* 504 * Set correct Baseband to analog shift 505 * setting to access analog chips. 506 */ 507 OS_REG_WRITE(ah, AR_PHY(0), 0x00004007); 508 OS_DELAY(2000); 509 AH_PRIVATE(ah)->ah_analog2GhzRev = ar5212GetRadioRev(ah); 510 511 /* Set baseband for 5GHz chip */ 512 OS_REG_WRITE(ah, AR_PHY(0), 0x00000007); 513 OS_DELAY(2000); 514 if ((AH_PRIVATE(ah)->ah_analog2GhzRev & 0xF0) != AR_RAD2111_SREV_MAJOR) { 515 HALDEBUG(ah, HAL_DEBUG_ANY, 516 "%s: 2G Radio Chip Rev 0x%02X is not " 517 "supported by this driver\n", __func__, 518 AH_PRIVATE(ah)->ah_analog2GhzRev); 519 ecode = HAL_ENOTSUPP; 520 goto bad; 521 } 522 } 523 524 ecode = ath_hal_eepromGet(ah, AR_EEP_REGDMN_0, &eeval); 525 if (ecode != HAL_OK) { 526 HALDEBUG(ah, HAL_DEBUG_ANY, 527 "%s: cannot read regulatory domain from EEPROM\n", 528 __func__); 529 goto bad; 530 } 531 AH_PRIVATE(ah)->ah_currentRD = eeval; 532 /* XXX record serial number */ 533 534 /* 535 * Got everything we need now to setup the capabilities. 536 */ 537 if (!ar5212FillCapabilityInfo(ah)) { 538 HALDEBUG(ah, HAL_DEBUG_ANY, 539 "%s: failed ar5212FillCapabilityInfo\n", __func__); 540 ecode = HAL_EEREAD; 541 goto bad; 542 } 543 544 if (!rf->attach(ah, &ecode)) { 545 HALDEBUG(ah, HAL_DEBUG_ANY, "%s: RF setup failed, status %u\n", 546 __func__, ecode); 547 goto bad; 548 } 549 /* 550 * Set noise floor adjust method; we arrange a 551 * direct call instead of thunking. 552 */ 553 AH_PRIVATE(ah)->ah_getNfAdjust = ahp->ah_rfHal->getNfAdjust; 554 555 /* Initialize gain ladder thermal calibration structure */ 556 ar5212InitializeGainValues(ah); 557 558 ecode = ath_hal_eepromGet(ah, AR_EEP_MACADDR, ahp->ah_macaddr); 559 if (ecode != HAL_OK) { 560 HALDEBUG(ah, HAL_DEBUG_ANY, 561 "%s: error getting mac address from EEPROM\n", __func__); 562 goto bad; 563 } 564 565 ar5212AniSetup(ah); 566 /* Setup of Radar/AR structures happens in ath_hal_initchannels*/ 567 ar5212InitNfCalHistBuffer(ah); 568 569 /* XXX EAR stuff goes here */ 570 571 HALDEBUG(ah, HAL_DEBUG_ATTACH, "%s: return\n", __func__); 572 573 return ah; 574 575bad: 576 if (ahp) 577 ar5212Detach((struct ath_hal *) ahp); 578 if (status) 579 *status = ecode; 580 return AH_NULL; 581#undef AH_EEPROM_PROTECT 582} 583 584void 585ar5212Detach(struct ath_hal *ah) 586{ 587 HALDEBUG(ah, HAL_DEBUG_ATTACH, "%s:\n", __func__); 588 589 HALASSERT(ah != AH_NULL); 590 HALASSERT(ah->ah_magic == AR5212_MAGIC); 591 592 ar5212AniDetach(ah); 593 ar5212RfDetach(ah); 594 ar5212Disable(ah); 595 ar5212SetPowerMode(ah, HAL_PM_FULL_SLEEP, AH_TRUE); 596 597 ath_hal_eepromDetach(ah); 598 ath_hal_free(ah); 599} 600 601HAL_BOOL 602ar5212ChipTest(struct ath_hal *ah) 603{ 604 uint32_t regAddr[2] = { AR_STA_ID0, AR_PHY_BASE+(8 << 2) }; 605 uint32_t regHold[2]; 606 uint32_t patternData[4] = 607 { 0x55555555, 0xaaaaaaaa, 0x66666666, 0x99999999 }; 608 int i, j; 609 610 /* Test PHY & MAC registers */ 611 for (i = 0; i < 2; i++) { 612 uint32_t addr = regAddr[i]; 613 uint32_t wrData, rdData; 614 615 regHold[i] = OS_REG_READ(ah, addr); 616 for (j = 0; j < 0x100; j++) { 617 wrData = (j << 16) | j; 618 OS_REG_WRITE(ah, addr, wrData); 619 rdData = OS_REG_READ(ah, addr); 620 if (rdData != wrData) { 621 HALDEBUG(ah, HAL_DEBUG_ANY, 622"%s: address test failed addr: 0x%08x - wr:0x%08x != rd:0x%08x\n", 623 __func__, addr, wrData, rdData); 624 return AH_FALSE; 625 } 626 } 627 for (j = 0; j < 4; j++) { 628 wrData = patternData[j]; 629 OS_REG_WRITE(ah, addr, wrData); 630 rdData = OS_REG_READ(ah, addr); 631 if (wrData != rdData) { 632 HALDEBUG(ah, HAL_DEBUG_ANY, 633"%s: address test failed addr: 0x%08x - wr:0x%08x != rd:0x%08x\n", 634 __func__, addr, wrData, rdData); 635 return AH_FALSE; 636 } 637 } 638 OS_REG_WRITE(ah, regAddr[i], regHold[i]); 639 } 640 OS_DELAY(100); 641 return AH_TRUE; 642} 643 644/* 645 * Store the channel edges for the requested operational mode 646 */ 647HAL_BOOL 648ar5212GetChannelEdges(struct ath_hal *ah, 649 uint16_t flags, uint16_t *low, uint16_t *high) 650{ 651 if (flags & IEEE80211_CHAN_5GHZ) { 652 *low = 4915; 653 *high = 6100; 654 return AH_TRUE; 655 } 656 if ((flags & IEEE80211_CHAN_2GHZ) && 657 (ath_hal_eepromGetFlag(ah, AR_EEP_BMODE) || 658 ath_hal_eepromGetFlag(ah, AR_EEP_GMODE))) { 659 *low = 2312; 660 *high = 2732; 661 return AH_TRUE; 662 } 663 return AH_FALSE; 664} 665 666/* 667 * Disable PLL when in L0s as well as receiver clock when in L1. 668 * This power saving option must be enabled through the Serdes. 669 * 670 * Programming the Serdes must go through the same 288 bit serial shift 671 * register as the other analog registers. Hence the 9 writes. 672 * 673 * XXX Clean up the magic numbers. 674 */ 675static void 676ar5212ConfigPCIE(struct ath_hal *ah, HAL_BOOL restore, HAL_BOOL power_off) 677{ 678 OS_REG_WRITE(ah, AR_PCIE_SERDES, 0x9248fc00); 679 OS_REG_WRITE(ah, AR_PCIE_SERDES, 0x24924924); 680 681 /* RX shut off when elecidle is asserted */ 682 OS_REG_WRITE(ah, AR_PCIE_SERDES, 0x28000039); 683 OS_REG_WRITE(ah, AR_PCIE_SERDES, 0x53160824); 684 OS_REG_WRITE(ah, AR_PCIE_SERDES, 0xe5980579); 685 686 /* Shut off PLL and CLKREQ active in L1 */ 687 OS_REG_WRITE(ah, AR_PCIE_SERDES, 0x001defff); 688 OS_REG_WRITE(ah, AR_PCIE_SERDES, 0x1aaabe40); 689 OS_REG_WRITE(ah, AR_PCIE_SERDES, 0xbe105554); 690 OS_REG_WRITE(ah, AR_PCIE_SERDES, 0x000e3007); 691 692 /* Load the new settings */ 693 OS_REG_WRITE(ah, AR_PCIE_SERDES2, 0x00000000); 694} 695 696static void 697ar5212DisablePCIE(struct ath_hal *ah) 698{ 699 /* NB: fill in for 9100 */ 700} 701 702/* 703 * Fill all software cached or static hardware state information. 704 * Return failure if capabilities are to come from EEPROM and 705 * cannot be read. 706 */ 707HAL_BOOL 708ar5212FillCapabilityInfo(struct ath_hal *ah) 709{ 710#define AR_KEYTABLE_SIZE 128 711#define IS_GRIFFIN_LITE(ah) \ 712 (AH_PRIVATE(ah)->ah_macVersion == AR_SREV_VERSION_GRIFFIN && \ 713 AH_PRIVATE(ah)->ah_macRev == AR_SREV_GRIFFIN_LITE) 714#define IS_COBRA(ah) \ 715 (AH_PRIVATE(ah)->ah_macVersion == AR_SREV_VERSION_COBRA) 716#define IS_2112(ah) \ 717 ((AH_PRIVATE(ah)->ah_analog5GhzRev & 0xF0) == AR_RAD2112_SREV_MAJOR) 718 719 struct ath_hal_private *ahpriv = AH_PRIVATE(ah); 720 HAL_CAPABILITIES *pCap = &ahpriv->ah_caps; 721 uint16_t capField, val; 722 723 /* Read the capability EEPROM location */ 724 if (ath_hal_eepromGet(ah, AR_EEP_OPCAP, &capField) != HAL_OK) { 725 HALDEBUG(ah, HAL_DEBUG_ANY, 726 "%s: unable to read caps from eeprom\n", __func__); 727 return AH_FALSE; 728 } 729 if (IS_2112(ah)) 730 ath_hal_eepromSet(ah, AR_EEP_AMODE, AH_FALSE); 731 if (capField == 0 && IS_GRIFFIN_LITE(ah)) { 732 /* 733 * For griffin-lite cards with unprogrammed capabilities. 734 */ 735 ath_hal_eepromSet(ah, AR_EEP_COMPRESS, AH_FALSE); 736 ath_hal_eepromSet(ah, AR_EEP_FASTFRAME, AH_FALSE); 737 ath_hal_eepromSet(ah, AR_EEP_TURBO5DISABLE, AH_TRUE); 738 ath_hal_eepromSet(ah, AR_EEP_TURBO2DISABLE, AH_TRUE); 739 HALDEBUG(ah, HAL_DEBUG_ATTACH, 740 "%s: override caps for griffin-lite, now 0x%x (+!turbo)\n", 741 __func__, capField); 742 } 743 744 /* Modify reg domain on newer cards that need to work with older sw */ 745 if (ahpriv->ah_opmode != HAL_M_HOSTAP && 746 ahpriv->ah_subvendorid == AR_SUBVENDOR_ID_NEW_A) { 747 if (ahpriv->ah_currentRD == 0x64 || 748 ahpriv->ah_currentRD == 0x65) 749 ahpriv->ah_currentRD += 5; 750 else if (ahpriv->ah_currentRD == 0x41) 751 ahpriv->ah_currentRD = 0x43; 752 HALDEBUG(ah, HAL_DEBUG_ATTACH, "%s: regdomain mapped to 0x%x\n", 753 __func__, ahpriv->ah_currentRD); 754 } 755 756 if (AH_PRIVATE(ah)->ah_macVersion == AR_SREV_2417 || 757 AH_PRIVATE(ah)->ah_macVersion == AR_SREV_2425) { 758 HALDEBUG(ah, HAL_DEBUG_ATTACH, 759 "%s: enable Bmode and disable turbo for Swan/Nala\n", 760 __func__); 761 ath_hal_eepromSet(ah, AR_EEP_BMODE, AH_TRUE); 762 ath_hal_eepromSet(ah, AR_EEP_COMPRESS, AH_FALSE); 763 ath_hal_eepromSet(ah, AR_EEP_FASTFRAME, AH_FALSE); 764 ath_hal_eepromSet(ah, AR_EEP_TURBO5DISABLE, AH_TRUE); 765 ath_hal_eepromSet(ah, AR_EEP_TURBO2DISABLE, AH_TRUE); 766 } 767 768 /* Construct wireless mode from EEPROM */ 769 pCap->halWirelessModes = 0; 770 if (ath_hal_eepromGetFlag(ah, AR_EEP_AMODE)) { 771 pCap->halWirelessModes |= HAL_MODE_11A; 772 if (!ath_hal_eepromGetFlag(ah, AR_EEP_TURBO5DISABLE)) 773 pCap->halWirelessModes |= HAL_MODE_TURBO; 774 } 775 if (ath_hal_eepromGetFlag(ah, AR_EEP_BMODE)) 776 pCap->halWirelessModes |= HAL_MODE_11B; 777 if (ath_hal_eepromGetFlag(ah, AR_EEP_GMODE) && 778 ahpriv->ah_subvendorid != AR_SUBVENDOR_ID_NOG) { 779 pCap->halWirelessModes |= HAL_MODE_11G; 780 if (!ath_hal_eepromGetFlag(ah, AR_EEP_TURBO2DISABLE)) 781 pCap->halWirelessModes |= HAL_MODE_108G; 782 } 783 784 pCap->halLow2GhzChan = 2312; 785 /* XXX 2417 too? */ 786 if (IS_RAD5112_ANY(ah) || IS_5413(ah) || IS_2425(ah) || IS_2417(ah)) 787 pCap->halHigh2GhzChan = 2500; 788 else 789 pCap->halHigh2GhzChan = 2732; 790 791 /* 792 * For AR5111 version < 4, the lowest centre frequency supported is 793 * 5130MHz. For AR5111 version 4, the 4.9GHz channels are supported 794 * but only in 10MHz increments. 795 * 796 * In addition, the programming method is wrong - it uses the IEEE 797 * channel number to calculate the frequency, rather than the 798 * channel centre. Since half/quarter rates re-use some of the 799 * 5GHz channel IEEE numbers, this will result in a badly programmed 800 * synth. 801 * 802 * Until the relevant support is written, just limit lower frequency 803 * support for AR5111 so things aren't incorrectly programmed. 804 * 805 * XXX It's also possible this code doesn't correctly limit the 806 * centre frequencies of potential channels; this is very important 807 * for half/quarter rate! 808 */ 809 if (AH_RADIO_MAJOR(ah) == AR_RAD5111_SREV_MAJOR) { 810 pCap->halLow5GhzChan = 5120; /* XXX lowest centre = 5130MHz */ 811 } else { 812 pCap->halLow5GhzChan = 4915; 813 } 814 pCap->halHigh5GhzChan = 6100; 815 816 pCap->halCipherCkipSupport = AH_FALSE; 817 pCap->halCipherTkipSupport = AH_TRUE; 818 pCap->halCipherAesCcmSupport = 819 (ath_hal_eepromGetFlag(ah, AR_EEP_AES) && 820 ((AH_PRIVATE(ah)->ah_macVersion > AR_SREV_VERSION_VENICE) || 821 ((AH_PRIVATE(ah)->ah_macVersion == AR_SREV_VERSION_VENICE) && 822 (AH_PRIVATE(ah)->ah_macRev >= AR_SREV_VERSION_OAHU)))); 823 824 pCap->halMicCkipSupport = AH_FALSE; 825 pCap->halMicTkipSupport = AH_TRUE; 826 pCap->halMicAesCcmSupport = ath_hal_eepromGetFlag(ah, AR_EEP_AES); 827 /* 828 * Starting with Griffin TX+RX mic keys can be combined 829 * in one key cache slot. 830 */ 831 if (AH_PRIVATE(ah)->ah_macVersion >= AR_SREV_VERSION_GRIFFIN) 832 pCap->halTkipMicTxRxKeySupport = AH_TRUE; 833 else 834 pCap->halTkipMicTxRxKeySupport = AH_FALSE; 835 pCap->halChanSpreadSupport = AH_TRUE; 836 pCap->halSleepAfterBeaconBroken = AH_TRUE; 837 838 if (ahpriv->ah_macRev > 1 || IS_COBRA(ah)) { 839 pCap->halCompressSupport = 840 ath_hal_eepromGetFlag(ah, AR_EEP_COMPRESS) && 841 (pCap->halWirelessModes & (HAL_MODE_11A|HAL_MODE_11G)) != 0; 842 pCap->halBurstSupport = ath_hal_eepromGetFlag(ah, AR_EEP_BURST); 843 pCap->halFastFramesSupport = 844 ath_hal_eepromGetFlag(ah, AR_EEP_FASTFRAME) && 845 (pCap->halWirelessModes & (HAL_MODE_11A|HAL_MODE_11G)) != 0; 846 pCap->halChapTuningSupport = AH_TRUE; 847 pCap->halTurboPrimeSupport = AH_TRUE; 848 } 849 pCap->halTurboGSupport = pCap->halWirelessModes & HAL_MODE_108G; 850 851 pCap->halPSPollBroken = AH_TRUE; /* XXX fixed in later revs? */ 852 pCap->halNumMRRetries = 4; /* Hardware supports 4 MRR */ 853 pCap->halNumTxMaps = 1; /* Single TX ptr per descr */ 854 pCap->halVEOLSupport = AH_TRUE; 855 pCap->halBssIdMaskSupport = AH_TRUE; 856 pCap->halMcastKeySrchSupport = AH_TRUE; 857 if ((ahpriv->ah_macVersion == AR_SREV_VERSION_VENICE && 858 ahpriv->ah_macRev == 8) || 859 ahpriv->ah_macVersion > AR_SREV_VERSION_VENICE) 860 pCap->halTsfAddSupport = AH_TRUE; 861 862 if (ath_hal_eepromGet(ah, AR_EEP_MAXQCU, &val) == HAL_OK) 863 pCap->halTotalQueues = val; 864 else 865 pCap->halTotalQueues = HAL_NUM_TX_QUEUES; 866 867 if (ath_hal_eepromGet(ah, AR_EEP_KCENTRIES, &val) == HAL_OK) 868 pCap->halKeyCacheSize = val; 869 else 870 pCap->halKeyCacheSize = AR_KEYTABLE_SIZE; 871 872 pCap->halChanHalfRate = AH_TRUE; 873 pCap->halChanQuarterRate = AH_TRUE; 874 875 /* 876 * RSSI uses the combined field; some 11n NICs may use 877 * the control chain RSSI. 878 */ 879 pCap->halUseCombinedRadarRssi = AH_TRUE; 880 881 if (ath_hal_eepromGetFlag(ah, AR_EEP_RFKILL) && 882 ath_hal_eepromGet(ah, AR_EEP_RFSILENT, &ahpriv->ah_rfsilent) == HAL_OK) { 883 /* NB: enabled by default */ 884 ahpriv->ah_rfkillEnabled = AH_TRUE; 885 pCap->halRfSilentSupport = AH_TRUE; 886 } 887 888 /* NB: this is a guess, noone seems to know the answer */ 889 ahpriv->ah_rxornIsFatal = 890 (AH_PRIVATE(ah)->ah_macVersion < AR_SREV_VERSION_VENICE); 891 892 /* enable features that first appeared in Hainan */ 893 if ((AH_PRIVATE(ah)->ah_macVersion == AR_SREV_VERSION_VENICE && 894 AH_PRIVATE(ah)->ah_macRev == AR_SREV_HAINAN) || 895 AH_PRIVATE(ah)->ah_macVersion > AR_SREV_VERSION_VENICE) { 896 /* h/w phy counters */ 897 pCap->halHwPhyCounterSupport = AH_TRUE; 898 /* bssid match disable */ 899 pCap->halBssidMatchSupport = AH_TRUE; 900 } 901 902 pCap->halTstampPrecision = 15; 903 pCap->halIntrMask = HAL_INT_COMMON 904 | HAL_INT_RX 905 | HAL_INT_TX 906 | HAL_INT_FATAL 907 | HAL_INT_BNR 908 | HAL_INT_BMISC 909 ; 910 if (AH_PRIVATE(ah)->ah_macVersion < AR_SREV_VERSION_GRIFFIN) 911 pCap->halIntrMask &= ~HAL_INT_TBTT; 912 913 pCap->hal4kbSplitTransSupport = AH_TRUE; 914 pCap->halHasRxSelfLinkedTail = AH_TRUE; 915 916 return AH_TRUE; 917#undef IS_COBRA 918#undef IS_GRIFFIN_LITE 919#undef AR_KEYTABLE_SIZE 920} 921 922static const char* 923ar5212Probe(uint16_t vendorid, uint16_t devid) 924{ 925 if (vendorid == ATHEROS_VENDOR_ID || 926 vendorid == ATHEROS_3COM_VENDOR_ID || 927 vendorid == ATHEROS_3COM2_VENDOR_ID) { 928 switch (devid) { 929 case AR5212_FPGA: 930 return "Atheros 5212 (FPGA)"; 931 case AR5212_DEVID: 932 case AR5212_DEVID_IBM: 933 case AR5212_DEFAULT: 934 return "Atheros 5212"; 935 case AR5212_AR2413: 936 return "Atheros 2413"; 937 case AR5212_AR2417: 938 return "Atheros 2417"; 939 case AR5212_AR5413: 940 return "Atheros 5413"; 941 case AR5212_AR5424: 942 return "Atheros 5424/2424"; 943 } 944 } 945 return AH_NULL; 946} 947AH_CHIP(AR5212, ar5212Probe, ar5212Attach); 948