HL201 revision 266328
1# Kernel configuration for the AT91SAM9G20 based Hot-e configuration file 2# 3# For more information on this file, please read the handbook section on 4# Kernel Configuration Files: 5# 6# http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html 7# 8# The handbook is also available locally in /usr/share/doc/handbook 9# if you've installed the doc distribution, otherwise always see the 10# FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the 11# latest information. 12# 13# An exhaustive list of options and more detailed explanations of the 14# device lines is also present in the ../../conf/NOTES and NOTES files. 15# If you are in doubt as to the purpose or necessity of a line, check first 16# in NOTES. 17# 18# $FreeBSD: stable/10/sys/arm/conf/HL201 266328 2014-05-17 16:46:15Z ian $ 19 20ident HL201 21 22include "../at91/std.hl201" 23 24#To statically compile in device wiring instead of /boot/device.hints 25hints "HL201.hints" 26makeoptions MODULES_OVERRIDE="" 27 28makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols 29options DDB 30options KDB 31 32options SCHED_4BSD # 4BSD scheduler 33options INET # InterNETworking 34#options INET6 # IPv6 communications protocols 35options FFS # Berkeley Fast Filesystem 36#options SOFTUPDATES # Enable FFS soft updates support 37#options UFS_ACL # Support for access control lists 38#options UFS_DIRHASH # Improve performance on big directories 39#options MD_ROOT # MD is a potential root device 40#options MD_ROOT_SIZE=4096 # 4MB ram disk 41options NANDFS # NAND file system 42options ROOTDEVNAME=\"ufs:/dev/mmcsd0s1a\" 43options NFSCL # New Network Filesystem Client 44#options NFSD # New Network Filesystem Server 45#options NFSLOCKD # Network Lock Manager 46options NFS_ROOT # NFS usable as /, requires NFSCL 47#options BOOTP_NFSROOT 48#options BOOTP 49#options BOOTP_NFSV3 50#options BOOTP_WIRED_TO=ate0 51#options BOOTP_COMPAT 52 53options ALT_BREAK_TO_DEBUGGER 54 55options GEOM_PART_BSD # BSD partition scheme 56options GEOM_PART_MBR # MBR partition scheme 57options TMPFS # Efficient memory filesystem 58#options MSDOSFS # MSDOS Filesystem 59#options CD9660 # ISO 9660 Filesystem 60#options PROCFS # Process filesystem (requires PSEUDOFS) 61options PSEUDOFS # Pseudo-filesystem framework 62#options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI 63#options KTRACE # ktrace(1) support 64options SYSVSHM # SYSV-style shared memory 65options SYSVMSG # SYSV-style message queues 66options SYSVSEM # SYSV-style semaphores 67options _KPOSIX_PRIORITY_SCHEDULING # Posix P1003_1B real-time extensions 68options MUTEX_NOINLINE 69options RWLOCK_NOINLINE 70options NO_FFS_SNAPSHOT 71options NO_SWAPPING 72device random 73device loop 74device ether 75device uart 76device ate 77device mii 78#device lxtphy 79 80# Debugging for use in -current 81#options INVARIANTS # Enable calls of extra sanity checking 82#options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS 83#options WITNESS # Enable checks to detect deadlocks and cycles 84#options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed 85#options DIAGNOSTIC 86 87device md 88device bpf 89 90# USB support 91device ohci # OHCI localbus->USB interface 92device usb # USB Bus (required) 93#device udbp # USB Double Bulk Pipe devices 94device uhid # "Human Interface Devices" 95#device ulpt # Printer 96device umass # Disks/Mass storage - Requires scbus and da 97 98# USB Ethernet, requires miibus 99device miibus 100#device aue # ADMtek USB Ethernet 101#device axe # ASIX Electronics USB Ethernet 102#device cdce # Generic USB over Ethernet 103#device cue # CATC USB Ethernet 104#device kue # Kawasaki LSI USB Ethernet 105#device rue # RealTek RTL8150 USB Ethernet 106device udav # Davicom DM9601E USB 107# USB Wireless 108#device rum # Ralink Technology RT2501USB wireless NICs 109#device uath # Atheros AR5523 wireless NICs 110#device ural # Ralink Technology RT2500USB wireless NICs 111#device zyd # ZyDAS zd1211/zd1211b wireless NICs 112# SCSI peripherals 113device scbus # SCSI bus (required for SCSI) 114device da # Direct Access (disks) 115device cd # CD 116device pass # Passthrough device (direct SCSI access) 117# Wireless NIC cards 118#device wlan # 802.11 support 119#device wlan_wep # 802.11 WEP support 120#device wlan_ccmp # 802.11 CCMP support 121#device wlan_tkip # 802.11 TKIP support 122#device wlan_amrr # AMRR transmit rate control algorithm 123options ROOTDEVNAME=\"ufs:da0s1a\" 124 125# NAND Flash - my board as 128MB Samsung part, YMMV. 126device nand # NAND interface on CS3 127 128# Coming soon, but not yet 129#options FDT 130#options FDT_DTB_STATIC 131#makeoptions FDT_DTS_FILE=hl201.dts 132 133options EARLY_PRINTF 134options SOCDEV_PA=0xfc000000 135options SOCDEV_VA=0xdc000000 136