1/*
2 * hid.c
3 */
4
5/*-
6 * Copyright (c) 2006 Maksim Yevmenkin <m_evmenkin@yahoo.com>
7 * All rights reserved.
8 *
9 * Redistribution and use in source and binary forms, with or without
10 * modification, are permitted provided that the following conditions
11 * are met:
12 * 1. Redistributions of source code must retain the above copyright
13 *    notice, this list of conditions and the following disclaimer.
14 * 2. Redistributions in binary form must reproduce the above copyright
15 *    notice, this list of conditions and the following disclaimer in the
16 *    documentation and/or other materials provided with the distribution.
17 *
18 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
19 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
20 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
21 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
22 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
23 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
24 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
25 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
26 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
27 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
28 * SUCH DAMAGE.
29 *
30 * $Id: hid.c,v 1.5 2006/09/07 21:06:53 max Exp $
31 * $FreeBSD$
32 */
33
34#include <sys/consio.h>
35#include <sys/mouse.h>
36#include <sys/queue.h>
37#include <assert.h>
38#include <bluetooth.h>
39#include <dev/usb/usb.h>
40#include <dev/usb/usbhid.h>
41#include <errno.h>
42#include <stdio.h>
43#include <string.h>
44#include <syslog.h>
45#include <unistd.h>
46#include <usbhid.h>
47#include "bthid_config.h"
48#include "bthidd.h"
49#include "kbd.h"
50
51#undef	min
52#define	min(x, y)	(((x) < (y))? (x) : (y))
53
54#undef	ASIZE
55#define	ASIZE(a)	(sizeof(a)/sizeof(a[0]))
56
57/*
58 * Process data from control channel
59 */
60
61int32_t
62hid_control(bthid_session_p s, uint8_t *data, int32_t len)
63{
64	assert(s != NULL);
65	assert(data != NULL);
66	assert(len > 0);
67
68	switch (data[0] >> 4) {
69        case 0: /* Handshake (response to command) */
70		if (data[0] & 0xf)
71			syslog(LOG_ERR, "Got handshake message with error " \
72				"response 0x%x from %s",
73				data[0], bt_ntoa(&s->bdaddr, NULL));
74		break;
75
76	case 1: /* HID Control */
77		switch (data[0] & 0xf) {
78		case 0: /* NOP */
79			break;
80
81		case 1: /* Hard reset */
82		case 2: /* Soft reset */
83			syslog(LOG_WARNING, "Device %s requested %s reset",
84				bt_ntoa(&s->bdaddr, NULL),
85				((data[0] & 0xf) == 1)? "hard" : "soft");
86			break;
87
88		case 3: /* Suspend */
89			syslog(LOG_NOTICE, "Device %s requested Suspend",
90				bt_ntoa(&s->bdaddr, NULL));
91			break;
92
93		case 4: /* Exit suspend */
94			syslog(LOG_NOTICE, "Device %s requested Exit Suspend",
95				bt_ntoa(&s->bdaddr, NULL));
96			break;
97
98		case 5: /* Virtual cable unplug */
99			syslog(LOG_NOTICE, "Device %s unplugged virtual cable",
100				bt_ntoa(&s->bdaddr, NULL));
101			session_close(s);
102			break;
103
104		default:
105			syslog(LOG_WARNING, "Device %s sent unknown " \
106                                "HID_Control message 0x%x",
107				bt_ntoa(&s->bdaddr, NULL), data[0]);
108			break;
109		}
110		break;
111
112	default:
113		syslog(LOG_WARNING, "Got unexpected message 0x%x on Control " \
114			"channel from %s", data[0], bt_ntoa(&s->bdaddr, NULL));
115		break;
116	}
117
118	return (0);
119}
120
121/*
122 * Process data from the interrupt channel
123 */
124
125int32_t
126hid_interrupt(bthid_session_p s, uint8_t *data, int32_t len)
127{
128	hid_device_p	hid_device;
129	hid_data_t	d;
130	hid_item_t	h;
131	int32_t		report_id, usage, page, val,
132			mouse_x, mouse_y, mouse_z, mouse_butt,
133			mevents, kevents, i;
134
135	assert(s != NULL);
136	assert(s->srv != NULL);
137	assert(data != NULL);
138
139	if (len < 3) {
140		syslog(LOG_ERR, "Got short message (%d bytes) on Interrupt " \
141			"channel from %s", len, bt_ntoa(&s->bdaddr, NULL));
142		return (-1);
143	}
144
145	if (data[0] != 0xa1) {
146		syslog(LOG_ERR, "Got unexpected message 0x%x on " \
147			"Interrupt channel from %s",
148			data[0], bt_ntoa(&s->bdaddr, NULL));
149		return (-1);
150	}
151
152	report_id = data[1];
153	data ++;
154	len --;
155
156	hid_device = get_hid_device(&s->bdaddr);
157	assert(hid_device != NULL);
158
159	mouse_x = mouse_y = mouse_z = mouse_butt = mevents = kevents = 0;
160
161	for (d = hid_start_parse(hid_device->desc, 1 << hid_input, -1);
162	     hid_get_item(d, &h) > 0; ) {
163		if ((h.flags & HIO_CONST) || (h.report_ID != report_id) ||
164		    (h.kind != hid_input))
165			continue;
166
167		page = HID_PAGE(h.usage);
168		usage = HID_USAGE(h.usage);
169		val = hid_get_data(data, &h);
170
171		switch (page) {
172		case HUP_GENERIC_DESKTOP:
173			switch (usage) {
174			case HUG_X:
175				mouse_x = val;
176				mevents ++;
177				break;
178
179			case HUG_Y:
180				mouse_y = val;
181				mevents ++;
182				break;
183
184			case HUG_WHEEL:
185				mouse_z = -val;
186				mevents ++;
187				break;
188
189			case HUG_SYSTEM_SLEEP:
190				if (val)
191					syslog(LOG_NOTICE, "Sleep button pressed");
192				break;
193			}
194			break;
195
196		case HUP_KEYBOARD:
197			kevents ++;
198
199			if (h.flags & HIO_VARIABLE) {
200				if (val && usage < kbd_maxkey())
201					bit_set(s->keys1, usage);
202			} else {
203				if (val && val < kbd_maxkey())
204					bit_set(s->keys1, val);
205
206				for (i = 1; i < h.report_count; i++) {
207					h.pos += h.report_size;
208					val = hid_get_data(data, &h);
209					if (val && val < kbd_maxkey())
210						bit_set(s->keys1, val);
211				}
212			}
213			break;
214
215		case HUP_BUTTON:
216			if (usage != 0) {
217				if (usage == 2)
218					usage = 3;
219				else if (usage == 3)
220					usage = 2;
221
222				mouse_butt |= (val << (usage - 1));
223				mevents ++;
224			}
225			break;
226
227		case HUP_CONSUMER:
228			if (!val)
229				break;
230
231			switch (usage) {
232			case HUC_AC_PAN:
233				/* Horizontal scroll */
234				if (val < 0)
235					mouse_butt |= (1 << 5);
236				else
237					mouse_butt |= (1 << 6);
238
239				mevents ++;
240				val = 0;
241				break;
242
243			case 0xb5: /* Scan Next Track */
244				val = 0x19;
245				break;
246
247			case 0xb6: /* Scan Previous Track */
248				val = 0x10;
249				break;
250
251			case 0xb7: /* Stop */
252				val = 0x24;
253				break;
254
255			case 0xcd: /* Play/Pause */
256				val = 0x22;
257				break;
258
259			case 0xe2: /* Mute */
260				val = 0x20;
261				break;
262
263			case 0xe9: /* Volume Up */
264				val = 0x30;
265				break;
266
267			case 0xea: /* Volume Down */
268				val = 0x2E;
269				break;
270
271			case 0x183: /* Media Select */
272				val = 0x6D;
273				break;
274
275			case 0x018a: /* Mail */
276				val = 0x6C;
277				break;
278
279			case 0x192: /* Calculator */
280				val = 0x21;
281				break;
282
283			case 0x194: /* My Computer */
284				val = 0x6B;
285				break;
286
287			case 0x221: /* WWW Search */
288				val = 0x65;
289				break;
290
291			case 0x223: /* WWW Home */
292				val = 0x32;
293				break;
294
295			case 0x224: /* WWW Back */
296				val = 0x6A;
297				break;
298
299			case 0x225: /* WWW Forward */
300				val = 0x69;
301				break;
302
303			case 0x226: /* WWW Stop */
304				val = 0x68;
305				break;
306
307			case 0x227: /* WWW Refresh */
308				val = 0x67;
309				break;
310
311			case 0x22a: /* WWW Favorites */
312				val = 0x66;
313				break;
314
315			default:
316				val = 0;
317				break;
318			}
319
320			/* XXX FIXME - UGLY HACK */
321			if (val != 0) {
322				if (hid_device->keyboard) {
323					int32_t	buf[4] = { 0xe0, val,
324							   0xe0, val|0x80 };
325
326					assert(s->vkbd != -1);
327					write(s->vkbd, buf, sizeof(buf));
328				} else
329					syslog(LOG_ERR, "Keyboard events " \
330						"received from non-keyboard " \
331						"device %s. Please report",
332						bt_ntoa(&s->bdaddr, NULL));
333			}
334			break;
335
336		case HUP_MICROSOFT:
337			switch (usage) {
338			case 0xfe01:
339				if (!hid_device->battery_power)
340					break;
341
342				switch (val) {
343				case 1:
344					syslog(LOG_INFO, "Battery is OK on %s",
345						bt_ntoa(&s->bdaddr, NULL));
346					break;
347
348				case 2:
349					syslog(LOG_NOTICE, "Low battery on %s",
350						bt_ntoa(&s->bdaddr, NULL));
351					break;
352
353				case 3:
354					syslog(LOG_WARNING, "Very low battery "\
355                                                "on %s",
356						bt_ntoa(&s->bdaddr, NULL));
357					break;
358                                }
359				break;
360			}
361			break;
362		}
363	}
364	hid_end_parse(d);
365
366	/*
367	 * XXX FIXME Feed keyboard events into kernel.
368	 * The code below works, bit host also needs to track
369	 * and handle repeat.
370	 *
371	 * Key repeat currently works in X, but not in console.
372	 */
373
374	if (kevents > 0) {
375		if (hid_device->keyboard) {
376			assert(s->vkbd != -1);
377			kbd_process_keys(s);
378		} else
379			syslog(LOG_ERR, "Keyboard events received from " \
380				"non-keyboard device %s. Please report",
381				bt_ntoa(&s->bdaddr, NULL));
382	}
383
384	/*
385	 * XXX FIXME Feed mouse events into kernel.
386	 * The code block below works, but it is not good enough.
387	 * Need to track double-clicks etc.
388	 *
389	 * Double click currently works in X, but not in console.
390	 */
391
392	if (mevents > 0) {
393		struct mouse_info	mi;
394
395		mi.operation = MOUSE_ACTION;
396		mi.u.data.x = mouse_x;
397		mi.u.data.y = mouse_y;
398		mi.u.data.z = mouse_z;
399		mi.u.data.buttons = mouse_butt;
400
401		if (ioctl(s->srv->cons, CONS_MOUSECTL, &mi) < 0)
402			syslog(LOG_ERR, "Could not process mouse events from " \
403				"%s. %s (%d)", bt_ntoa(&s->bdaddr, NULL),
404				strerror(errno), errno);
405	}
406
407	return (0);
408}
409