1/* $FreeBSD$ */ 2/*- 3 * Copyright (c) 2008 Hans Petter Selasky. All rights reserved. 4 * Copyright (c) 1998 The NetBSD Foundation, Inc. All rights reserved. 5 * Copyright (c) 1998 Lennart Augustsson. All rights reserved. 6 * 7 * Redistribution and use in source and binary forms, with or without 8 * modification, are permitted provided that the following conditions 9 * are met: 10 * 1. Redistributions of source code must retain the above copyright 11 * notice, this list of conditions and the following disclaimer. 12 * 2. Redistributions in binary form must reproduce the above copyright 13 * notice, this list of conditions and the following disclaimer in the 14 * documentation and/or other materials provided with the distribution. 15 * 16 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 17 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 18 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 19 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 20 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 21 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 22 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 23 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 24 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 25 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 26 * SUCH DAMAGE. 27 */ 28 29/* 30 * USB Universal Host Controller driver. 31 * Handles e.g. PIIX3 and PIIX4. 32 * 33 * UHCI spec: http://developer.intel.com/design/USB/UHCI11D.htm 34 * USB spec: http://www.usb.org/developers/docs/usbspec.zip 35 * PIIXn spec: ftp://download.intel.com/design/intarch/datashts/29055002.pdf 36 * ftp://download.intel.com/design/intarch/datashts/29056201.pdf 37 */ 38 39#ifdef USB_GLOBAL_INCLUDE_FILE 40#include USB_GLOBAL_INCLUDE_FILE 41#else 42#include <sys/stdint.h> 43#include <sys/stddef.h> 44#include <sys/param.h> 45#include <sys/queue.h> 46#include <sys/types.h> 47#include <sys/systm.h> 48#include <sys/kernel.h> 49#include <sys/bus.h> 50#include <sys/module.h> 51#include <sys/lock.h> 52#include <sys/mutex.h> 53#include <sys/condvar.h> 54#include <sys/sysctl.h> 55#include <sys/sx.h> 56#include <sys/unistd.h> 57#include <sys/callout.h> 58#include <sys/malloc.h> 59#include <sys/priv.h> 60 61#include <dev/usb/usb.h> 62#include <dev/usb/usbdi.h> 63 64#define USB_DEBUG_VAR uhcidebug 65 66#include <dev/usb/usb_core.h> 67#include <dev/usb/usb_debug.h> 68#include <dev/usb/usb_busdma.h> 69#include <dev/usb/usb_process.h> 70#include <dev/usb/usb_transfer.h> 71#include <dev/usb/usb_device.h> 72#include <dev/usb/usb_hub.h> 73#include <dev/usb/usb_util.h> 74 75#include <dev/usb/usb_controller.h> 76#include <dev/usb/usb_bus.h> 77#endif /* USB_GLOBAL_INCLUDE_FILE */ 78 79#include <dev/usb/controller/uhci.h> 80#include <dev/usb/controller/uhcireg.h> 81 82#define alt_next next 83#define UHCI_BUS2SC(bus) \ 84 ((uhci_softc_t *)(((uint8_t *)(bus)) - \ 85 ((uint8_t *)&(((uhci_softc_t *)0)->sc_bus)))) 86 87#ifdef USB_DEBUG 88static int uhcidebug = 0; 89static int uhcinoloop = 0; 90 91static SYSCTL_NODE(_hw_usb, OID_AUTO, uhci, CTLFLAG_RW, 0, "USB uhci"); 92SYSCTL_INT(_hw_usb_uhci, OID_AUTO, debug, CTLFLAG_RW | CTLFLAG_TUN, 93 &uhcidebug, 0, "uhci debug level"); 94TUNABLE_INT("hw.usb.uhci.debug", &uhcidebug); 95SYSCTL_INT(_hw_usb_uhci, OID_AUTO, loop, CTLFLAG_RW | CTLFLAG_TUN, 96 &uhcinoloop, 0, "uhci noloop"); 97TUNABLE_INT("hw.usb.uhci.loop", &uhcinoloop); 98 99static void uhci_dumpregs(uhci_softc_t *sc); 100static void uhci_dump_tds(uhci_td_t *td); 101 102#endif 103 104#define UBARR(sc) bus_space_barrier((sc)->sc_io_tag, (sc)->sc_io_hdl, 0, (sc)->sc_io_size, \ 105 BUS_SPACE_BARRIER_READ|BUS_SPACE_BARRIER_WRITE) 106#define UWRITE1(sc, r, x) \ 107 do { UBARR(sc); bus_space_write_1((sc)->sc_io_tag, (sc)->sc_io_hdl, (r), (x)); \ 108 } while (/*CONSTCOND*/0) 109#define UWRITE2(sc, r, x) \ 110 do { UBARR(sc); bus_space_write_2((sc)->sc_io_tag, (sc)->sc_io_hdl, (r), (x)); \ 111 } while (/*CONSTCOND*/0) 112#define UWRITE4(sc, r, x) \ 113 do { UBARR(sc); bus_space_write_4((sc)->sc_io_tag, (sc)->sc_io_hdl, (r), (x)); \ 114 } while (/*CONSTCOND*/0) 115#define UREAD1(sc, r) (UBARR(sc), bus_space_read_1((sc)->sc_io_tag, (sc)->sc_io_hdl, (r))) 116#define UREAD2(sc, r) (UBARR(sc), bus_space_read_2((sc)->sc_io_tag, (sc)->sc_io_hdl, (r))) 117#define UREAD4(sc, r) (UBARR(sc), bus_space_read_4((sc)->sc_io_tag, (sc)->sc_io_hdl, (r))) 118 119#define UHCICMD(sc, cmd) UWRITE2(sc, UHCI_CMD, cmd) 120#define UHCISTS(sc) UREAD2(sc, UHCI_STS) 121 122#define UHCI_RESET_TIMEOUT 100 /* ms, reset timeout */ 123 124#define UHCI_INTR_ENDPT 1 125 126struct uhci_mem_layout { 127 128 struct usb_page_search buf_res; 129 struct usb_page_search fix_res; 130 131 struct usb_page_cache *buf_pc; 132 struct usb_page_cache *fix_pc; 133 134 uint32_t buf_offset; 135 136 uint16_t max_frame_size; 137}; 138 139struct uhci_std_temp { 140 141 struct uhci_mem_layout ml; 142 uhci_td_t *td; 143 uhci_td_t *td_next; 144 uint32_t average; 145 uint32_t td_status; 146 uint32_t td_token; 147 uint32_t len; 148 uint16_t max_frame_size; 149 uint8_t shortpkt; 150 uint8_t setup_alt_next; 151 uint8_t last_frame; 152}; 153 154extern struct usb_bus_methods uhci_bus_methods; 155extern struct usb_pipe_methods uhci_device_bulk_methods; 156extern struct usb_pipe_methods uhci_device_ctrl_methods; 157extern struct usb_pipe_methods uhci_device_intr_methods; 158extern struct usb_pipe_methods uhci_device_isoc_methods; 159 160static uint8_t uhci_restart(uhci_softc_t *sc); 161static void uhci_do_poll(struct usb_bus *); 162static void uhci_device_done(struct usb_xfer *, usb_error_t); 163static void uhci_transfer_intr_enqueue(struct usb_xfer *); 164static void uhci_timeout(void *); 165static uint8_t uhci_check_transfer(struct usb_xfer *); 166static void uhci_root_intr(uhci_softc_t *sc); 167 168void 169uhci_iterate_hw_softc(struct usb_bus *bus, usb_bus_mem_sub_cb_t *cb) 170{ 171 struct uhci_softc *sc = UHCI_BUS2SC(bus); 172 uint32_t i; 173 174 cb(bus, &sc->sc_hw.pframes_pc, &sc->sc_hw.pframes_pg, 175 sizeof(uint32_t) * UHCI_FRAMELIST_COUNT, UHCI_FRAMELIST_ALIGN); 176 177 cb(bus, &sc->sc_hw.ls_ctl_start_pc, &sc->sc_hw.ls_ctl_start_pg, 178 sizeof(uhci_qh_t), UHCI_QH_ALIGN); 179 180 cb(bus, &sc->sc_hw.fs_ctl_start_pc, &sc->sc_hw.fs_ctl_start_pg, 181 sizeof(uhci_qh_t), UHCI_QH_ALIGN); 182 183 cb(bus, &sc->sc_hw.bulk_start_pc, &sc->sc_hw.bulk_start_pg, 184 sizeof(uhci_qh_t), UHCI_QH_ALIGN); 185 186 cb(bus, &sc->sc_hw.last_qh_pc, &sc->sc_hw.last_qh_pg, 187 sizeof(uhci_qh_t), UHCI_QH_ALIGN); 188 189 cb(bus, &sc->sc_hw.last_td_pc, &sc->sc_hw.last_td_pg, 190 sizeof(uhci_td_t), UHCI_TD_ALIGN); 191 192 for (i = 0; i != UHCI_VFRAMELIST_COUNT; i++) { 193 cb(bus, sc->sc_hw.isoc_start_pc + i, 194 sc->sc_hw.isoc_start_pg + i, 195 sizeof(uhci_td_t), UHCI_TD_ALIGN); 196 } 197 198 for (i = 0; i != UHCI_IFRAMELIST_COUNT; i++) { 199 cb(bus, sc->sc_hw.intr_start_pc + i, 200 sc->sc_hw.intr_start_pg + i, 201 sizeof(uhci_qh_t), UHCI_QH_ALIGN); 202 } 203} 204 205static void 206uhci_mem_layout_init(struct uhci_mem_layout *ml, struct usb_xfer *xfer) 207{ 208 ml->buf_pc = xfer->frbuffers + 0; 209 ml->fix_pc = xfer->buf_fixup; 210 211 ml->buf_offset = 0; 212 213 ml->max_frame_size = xfer->max_frame_size; 214} 215 216static void 217uhci_mem_layout_fixup(struct uhci_mem_layout *ml, struct uhci_td *td) 218{ 219 usbd_get_page(ml->buf_pc, ml->buf_offset, &ml->buf_res); 220 221 if (ml->buf_res.length < td->len) { 222 223 /* need to do a fixup */ 224 225 usbd_get_page(ml->fix_pc, 0, &ml->fix_res); 226 227 td->td_buffer = htole32(ml->fix_res.physaddr); 228 229 /* 230 * The UHCI driver cannot handle 231 * page crossings, so a fixup is 232 * needed: 233 * 234 * +----+----+ - - - 235 * | YYY|Y | 236 * +----+----+ - - - 237 * \ \ 238 * \ \ 239 * +----+ 240 * |YYYY| (fixup) 241 * +----+ 242 */ 243 244 if ((td->td_token & htole32(UHCI_TD_PID)) == 245 htole32(UHCI_TD_PID_IN)) { 246 td->fix_pc = ml->fix_pc; 247 usb_pc_cpu_invalidate(ml->fix_pc); 248 249 } else { 250 td->fix_pc = NULL; 251 252 /* copy data to fixup location */ 253 254 usbd_copy_out(ml->buf_pc, ml->buf_offset, 255 ml->fix_res.buffer, td->len); 256 257 usb_pc_cpu_flush(ml->fix_pc); 258 } 259 260 /* prepare next fixup */ 261 262 ml->fix_pc++; 263 264 } else { 265 266 td->td_buffer = htole32(ml->buf_res.physaddr); 267 td->fix_pc = NULL; 268 } 269 270 /* prepare next data location */ 271 272 ml->buf_offset += td->len; 273} 274 275/* 276 * Return values: 277 * 0: Success 278 * Else: Failure 279 */ 280static uint8_t 281uhci_restart(uhci_softc_t *sc) 282{ 283 struct usb_page_search buf_res; 284 285 USB_BUS_LOCK_ASSERT(&sc->sc_bus, MA_OWNED); 286 287 if (UREAD2(sc, UHCI_CMD) & UHCI_CMD_RS) { 288 DPRINTFN(2, "Already started\n"); 289 return (0); 290 } 291 292 DPRINTFN(2, "Restarting\n"); 293 294 usbd_get_page(&sc->sc_hw.pframes_pc, 0, &buf_res); 295 296 /* Reload fresh base address */ 297 UWRITE4(sc, UHCI_FLBASEADDR, buf_res.physaddr); 298 299 /* 300 * Assume 64 byte packets at frame end and start HC controller: 301 */ 302 UHCICMD(sc, (UHCI_CMD_MAXP | UHCI_CMD_RS)); 303 304 /* wait 10 milliseconds */ 305 306 usb_pause_mtx(&sc->sc_bus.bus_mtx, hz / 100); 307 308 /* check that controller has started */ 309 310 if (UREAD2(sc, UHCI_STS) & UHCI_STS_HCH) { 311 DPRINTFN(2, "Failed\n"); 312 return (1); 313 } 314 return (0); 315} 316 317void 318uhci_reset(uhci_softc_t *sc) 319{ 320 uint16_t n; 321 322 USB_BUS_LOCK_ASSERT(&sc->sc_bus, MA_OWNED); 323 324 DPRINTF("resetting the HC\n"); 325 326 /* disable interrupts */ 327 328 UWRITE2(sc, UHCI_INTR, 0); 329 330 /* global reset */ 331 332 UHCICMD(sc, UHCI_CMD_GRESET); 333 334 /* wait */ 335 336 usb_pause_mtx(&sc->sc_bus.bus_mtx, 337 USB_MS_TO_TICKS(USB_BUS_RESET_DELAY)); 338 339 /* terminate all transfers */ 340 341 UHCICMD(sc, UHCI_CMD_HCRESET); 342 343 /* the reset bit goes low when the controller is done */ 344 345 n = UHCI_RESET_TIMEOUT; 346 while (n--) { 347 /* wait one millisecond */ 348 349 usb_pause_mtx(&sc->sc_bus.bus_mtx, hz / 1000); 350 351 if (!(UREAD2(sc, UHCI_CMD) & UHCI_CMD_HCRESET)) { 352 goto done_1; 353 } 354 } 355 356 device_printf(sc->sc_bus.bdev, 357 "controller did not reset\n"); 358 359done_1: 360 361 n = 10; 362 while (n--) { 363 /* wait one millisecond */ 364 365 usb_pause_mtx(&sc->sc_bus.bus_mtx, hz / 1000); 366 367 /* check if HC is stopped */ 368 if (UREAD2(sc, UHCI_STS) & UHCI_STS_HCH) { 369 goto done_2; 370 } 371 } 372 373 device_printf(sc->sc_bus.bdev, 374 "controller did not stop\n"); 375 376done_2: 377 378 /* reset frame number */ 379 UWRITE2(sc, UHCI_FRNUM, 0); 380 /* set default SOF value */ 381 UWRITE1(sc, UHCI_SOF, 0x40); 382 383 USB_BUS_UNLOCK(&sc->sc_bus); 384 385 /* stop root interrupt */ 386 usb_callout_drain(&sc->sc_root_intr); 387 388 USB_BUS_LOCK(&sc->sc_bus); 389} 390 391static void 392uhci_start(uhci_softc_t *sc) 393{ 394 USB_BUS_LOCK_ASSERT(&sc->sc_bus, MA_OWNED); 395 396 DPRINTFN(2, "enabling\n"); 397 398 /* enable interrupts */ 399 400 UWRITE2(sc, UHCI_INTR, 401 (UHCI_INTR_TOCRCIE | 402 UHCI_INTR_RIE | 403 UHCI_INTR_IOCE | 404 UHCI_INTR_SPIE)); 405 406 if (uhci_restart(sc)) { 407 device_printf(sc->sc_bus.bdev, 408 "cannot start HC controller\n"); 409 } 410 411 /* start root interrupt */ 412 uhci_root_intr(sc); 413} 414 415static struct uhci_qh * 416uhci_init_qh(struct usb_page_cache *pc) 417{ 418 struct usb_page_search buf_res; 419 struct uhci_qh *qh; 420 421 usbd_get_page(pc, 0, &buf_res); 422 423 qh = buf_res.buffer; 424 425 qh->qh_self = 426 htole32(buf_res.physaddr) | 427 htole32(UHCI_PTR_QH); 428 429 qh->page_cache = pc; 430 431 return (qh); 432} 433 434static struct uhci_td * 435uhci_init_td(struct usb_page_cache *pc) 436{ 437 struct usb_page_search buf_res; 438 struct uhci_td *td; 439 440 usbd_get_page(pc, 0, &buf_res); 441 442 td = buf_res.buffer; 443 444 td->td_self = 445 htole32(buf_res.physaddr) | 446 htole32(UHCI_PTR_TD); 447 448 td->page_cache = pc; 449 450 return (td); 451} 452 453usb_error_t 454uhci_init(uhci_softc_t *sc) 455{ 456 uint16_t bit; 457 uint16_t x; 458 uint16_t y; 459 460 DPRINTF("start\n"); 461 462 usb_callout_init_mtx(&sc->sc_root_intr, &sc->sc_bus.bus_mtx, 0); 463 464#ifdef USB_DEBUG 465 if (uhcidebug > 2) { 466 uhci_dumpregs(sc); 467 } 468#endif 469 /* 470 * Setup QH's 471 */ 472 sc->sc_ls_ctl_p_last = 473 uhci_init_qh(&sc->sc_hw.ls_ctl_start_pc); 474 475 sc->sc_fs_ctl_p_last = 476 uhci_init_qh(&sc->sc_hw.fs_ctl_start_pc); 477 478 sc->sc_bulk_p_last = 479 uhci_init_qh(&sc->sc_hw.bulk_start_pc); 480#if 0 481 sc->sc_reclaim_qh_p = 482 sc->sc_fs_ctl_p_last; 483#else 484 /* setup reclaim looping point */ 485 sc->sc_reclaim_qh_p = 486 sc->sc_bulk_p_last; 487#endif 488 489 sc->sc_last_qh_p = 490 uhci_init_qh(&sc->sc_hw.last_qh_pc); 491 492 sc->sc_last_td_p = 493 uhci_init_td(&sc->sc_hw.last_td_pc); 494 495 for (x = 0; x != UHCI_VFRAMELIST_COUNT; x++) { 496 sc->sc_isoc_p_last[x] = 497 uhci_init_td(sc->sc_hw.isoc_start_pc + x); 498 } 499 500 for (x = 0; x != UHCI_IFRAMELIST_COUNT; x++) { 501 sc->sc_intr_p_last[x] = 502 uhci_init_qh(sc->sc_hw.intr_start_pc + x); 503 } 504 505 /* 506 * the QHs are arranged to give poll intervals that are 507 * powers of 2 times 1ms 508 */ 509 bit = UHCI_IFRAMELIST_COUNT / 2; 510 while (bit) { 511 x = bit; 512 while (x & bit) { 513 uhci_qh_t *qh_x; 514 uhci_qh_t *qh_y; 515 516 y = (x ^ bit) | (bit / 2); 517 518 /* 519 * the next QH has half the poll interval 520 */ 521 qh_x = sc->sc_intr_p_last[x]; 522 qh_y = sc->sc_intr_p_last[y]; 523 524 qh_x->h_next = NULL; 525 qh_x->qh_h_next = qh_y->qh_self; 526 qh_x->e_next = NULL; 527 qh_x->qh_e_next = htole32(UHCI_PTR_T); 528 x++; 529 } 530 bit >>= 1; 531 } 532 533 if (1) { 534 uhci_qh_t *qh_ls; 535 uhci_qh_t *qh_intr; 536 537 qh_ls = sc->sc_ls_ctl_p_last; 538 qh_intr = sc->sc_intr_p_last[0]; 539 540 /* start QH for interrupt traffic */ 541 qh_intr->h_next = qh_ls; 542 qh_intr->qh_h_next = qh_ls->qh_self; 543 qh_intr->e_next = 0; 544 qh_intr->qh_e_next = htole32(UHCI_PTR_T); 545 } 546 for (x = 0; x != UHCI_VFRAMELIST_COUNT; x++) { 547 548 uhci_td_t *td_x; 549 uhci_qh_t *qh_intr; 550 551 td_x = sc->sc_isoc_p_last[x]; 552 qh_intr = sc->sc_intr_p_last[x | (UHCI_IFRAMELIST_COUNT / 2)]; 553 554 /* start TD for isochronous traffic */ 555 td_x->next = NULL; 556 td_x->td_next = qh_intr->qh_self; 557 td_x->td_status = htole32(UHCI_TD_IOS); 558 td_x->td_token = htole32(0); 559 td_x->td_buffer = htole32(0); 560 } 561 562 if (1) { 563 uhci_qh_t *qh_ls; 564 uhci_qh_t *qh_fs; 565 566 qh_ls = sc->sc_ls_ctl_p_last; 567 qh_fs = sc->sc_fs_ctl_p_last; 568 569 /* start QH where low speed control traffic will be queued */ 570 qh_ls->h_next = qh_fs; 571 qh_ls->qh_h_next = qh_fs->qh_self; 572 qh_ls->e_next = 0; 573 qh_ls->qh_e_next = htole32(UHCI_PTR_T); 574 } 575 if (1) { 576 uhci_qh_t *qh_ctl; 577 uhci_qh_t *qh_blk; 578 uhci_qh_t *qh_lst; 579 uhci_td_t *td_lst; 580 581 qh_ctl = sc->sc_fs_ctl_p_last; 582 qh_blk = sc->sc_bulk_p_last; 583 584 /* start QH where full speed control traffic will be queued */ 585 qh_ctl->h_next = qh_blk; 586 qh_ctl->qh_h_next = qh_blk->qh_self; 587 qh_ctl->e_next = 0; 588 qh_ctl->qh_e_next = htole32(UHCI_PTR_T); 589 590 qh_lst = sc->sc_last_qh_p; 591 592 /* start QH where bulk traffic will be queued */ 593 qh_blk->h_next = qh_lst; 594 qh_blk->qh_h_next = qh_lst->qh_self; 595 qh_blk->e_next = 0; 596 qh_blk->qh_e_next = htole32(UHCI_PTR_T); 597 598 td_lst = sc->sc_last_td_p; 599 600 /* end QH which is used for looping the QHs */ 601 qh_lst->h_next = 0; 602 qh_lst->qh_h_next = htole32(UHCI_PTR_T); /* end of QH chain */ 603 qh_lst->e_next = td_lst; 604 qh_lst->qh_e_next = td_lst->td_self; 605 606 /* 607 * end TD which hangs from the last QH, to avoid a bug in the PIIX 608 * that makes it run berserk otherwise 609 */ 610 td_lst->next = 0; 611 td_lst->td_next = htole32(UHCI_PTR_T); 612 td_lst->td_status = htole32(0); /* inactive */ 613 td_lst->td_token = htole32(0); 614 td_lst->td_buffer = htole32(0); 615 } 616 if (1) { 617 struct usb_page_search buf_res; 618 uint32_t *pframes; 619 620 usbd_get_page(&sc->sc_hw.pframes_pc, 0, &buf_res); 621 622 pframes = buf_res.buffer; 623 624 625 /* 626 * Setup UHCI framelist 627 * 628 * Execution order: 629 * 630 * pframes -> full speed isochronous -> interrupt QH's -> low 631 * speed control -> full speed control -> bulk transfers 632 * 633 */ 634 635 for (x = 0; x != UHCI_FRAMELIST_COUNT; x++) { 636 pframes[x] = 637 sc->sc_isoc_p_last[x % UHCI_VFRAMELIST_COUNT]->td_self; 638 } 639 } 640 /* flush all cache into memory */ 641 642 usb_bus_mem_flush_all(&sc->sc_bus, &uhci_iterate_hw_softc); 643 644 /* set up the bus struct */ 645 sc->sc_bus.methods = &uhci_bus_methods; 646 647 USB_BUS_LOCK(&sc->sc_bus); 648 /* reset the controller */ 649 uhci_reset(sc); 650 651 /* start the controller */ 652 uhci_start(sc); 653 USB_BUS_UNLOCK(&sc->sc_bus); 654 655 /* catch lost interrupts */ 656 uhci_do_poll(&sc->sc_bus); 657 658 return (0); 659} 660 661static void 662uhci_suspend(uhci_softc_t *sc) 663{ 664#ifdef USB_DEBUG 665 if (uhcidebug > 2) { 666 uhci_dumpregs(sc); 667 } 668#endif 669 670 USB_BUS_LOCK(&sc->sc_bus); 671 672 /* stop the controller */ 673 674 uhci_reset(sc); 675 676 /* enter global suspend */ 677 678 UHCICMD(sc, UHCI_CMD_EGSM); 679 680 USB_BUS_UNLOCK(&sc->sc_bus); 681} 682 683static void 684uhci_resume(uhci_softc_t *sc) 685{ 686 USB_BUS_LOCK(&sc->sc_bus); 687 688 /* reset the controller */ 689 690 uhci_reset(sc); 691 692 /* force global resume */ 693 694 UHCICMD(sc, UHCI_CMD_FGR); 695 696 /* and start traffic again */ 697 698 uhci_start(sc); 699 700 USB_BUS_UNLOCK(&sc->sc_bus); 701 702#ifdef USB_DEBUG 703 if (uhcidebug > 2) 704 uhci_dumpregs(sc); 705#endif 706 707 /* catch lost interrupts */ 708 uhci_do_poll(&sc->sc_bus); 709} 710 711#ifdef USB_DEBUG 712static void 713uhci_dumpregs(uhci_softc_t *sc) 714{ 715 DPRINTFN(0, "%s regs: cmd=%04x, sts=%04x, intr=%04x, frnum=%04x, " 716 "flbase=%08x, sof=%04x, portsc1=%04x, portsc2=%04x\n", 717 device_get_nameunit(sc->sc_bus.bdev), 718 UREAD2(sc, UHCI_CMD), 719 UREAD2(sc, UHCI_STS), 720 UREAD2(sc, UHCI_INTR), 721 UREAD2(sc, UHCI_FRNUM), 722 UREAD4(sc, UHCI_FLBASEADDR), 723 UREAD1(sc, UHCI_SOF), 724 UREAD2(sc, UHCI_PORTSC1), 725 UREAD2(sc, UHCI_PORTSC2)); 726} 727 728static uint8_t 729uhci_dump_td(uhci_td_t *p) 730{ 731 uint32_t td_next; 732 uint32_t td_status; 733 uint32_t td_token; 734 uint8_t temp; 735 736 usb_pc_cpu_invalidate(p->page_cache); 737 738 td_next = le32toh(p->td_next); 739 td_status = le32toh(p->td_status); 740 td_token = le32toh(p->td_token); 741 742 /* 743 * Check whether the link pointer in this TD marks the link pointer 744 * as end of queue: 745 */ 746 temp = ((td_next & UHCI_PTR_T) || (td_next == 0)); 747 748 printf("TD(%p) at 0x%08x = link=0x%08x status=0x%08x " 749 "token=0x%08x buffer=0x%08x\n", 750 p, 751 le32toh(p->td_self), 752 td_next, 753 td_status, 754 td_token, 755 le32toh(p->td_buffer)); 756 757 printf("TD(%p) td_next=%s%s%s td_status=%s%s%s%s%s%s%s%s%s%s%s, errcnt=%d, actlen=%d pid=%02x," 758 "addr=%d,endpt=%d,D=%d,maxlen=%d\n", 759 p, 760 (td_next & 1) ? "-T" : "", 761 (td_next & 2) ? "-Q" : "", 762 (td_next & 4) ? "-VF" : "", 763 (td_status & UHCI_TD_BITSTUFF) ? "-BITSTUFF" : "", 764 (td_status & UHCI_TD_CRCTO) ? "-CRCTO" : "", 765 (td_status & UHCI_TD_NAK) ? "-NAK" : "", 766 (td_status & UHCI_TD_BABBLE) ? "-BABBLE" : "", 767 (td_status & UHCI_TD_DBUFFER) ? "-DBUFFER" : "", 768 (td_status & UHCI_TD_STALLED) ? "-STALLED" : "", 769 (td_status & UHCI_TD_ACTIVE) ? "-ACTIVE" : "", 770 (td_status & UHCI_TD_IOC) ? "-IOC" : "", 771 (td_status & UHCI_TD_IOS) ? "-IOS" : "", 772 (td_status & UHCI_TD_LS) ? "-LS" : "", 773 (td_status & UHCI_TD_SPD) ? "-SPD" : "", 774 UHCI_TD_GET_ERRCNT(td_status), 775 UHCI_TD_GET_ACTLEN(td_status), 776 UHCI_TD_GET_PID(td_token), 777 UHCI_TD_GET_DEVADDR(td_token), 778 UHCI_TD_GET_ENDPT(td_token), 779 UHCI_TD_GET_DT(td_token), 780 UHCI_TD_GET_MAXLEN(td_token)); 781 782 return (temp); 783} 784 785static uint8_t 786uhci_dump_qh(uhci_qh_t *sqh) 787{ 788 uint8_t temp; 789 uint32_t qh_h_next; 790 uint32_t qh_e_next; 791 792 usb_pc_cpu_invalidate(sqh->page_cache); 793 794 qh_h_next = le32toh(sqh->qh_h_next); 795 qh_e_next = le32toh(sqh->qh_e_next); 796 797 DPRINTFN(0, "QH(%p) at 0x%08x: h_next=0x%08x e_next=0x%08x\n", sqh, 798 le32toh(sqh->qh_self), qh_h_next, qh_e_next); 799 800 temp = ((((sqh->h_next != NULL) && !(qh_h_next & UHCI_PTR_T)) ? 1 : 0) | 801 (((sqh->e_next != NULL) && !(qh_e_next & UHCI_PTR_T)) ? 2 : 0)); 802 803 return (temp); 804} 805 806static void 807uhci_dump_all(uhci_softc_t *sc) 808{ 809 uhci_dumpregs(sc); 810 uhci_dump_qh(sc->sc_ls_ctl_p_last); 811 uhci_dump_qh(sc->sc_fs_ctl_p_last); 812 uhci_dump_qh(sc->sc_bulk_p_last); 813 uhci_dump_qh(sc->sc_last_qh_p); 814} 815 816static void 817uhci_dump_tds(uhci_td_t *td) 818{ 819 for (; 820 td != NULL; 821 td = td->obj_next) { 822 if (uhci_dump_td(td)) { 823 break; 824 } 825 } 826} 827 828#endif 829 830/* 831 * Let the last QH loop back to the full speed control transfer QH. 832 * This is what intel calls "bandwidth reclamation" and improves 833 * USB performance a lot for some devices. 834 * If we are already looping, just count it. 835 */ 836static void 837uhci_add_loop(uhci_softc_t *sc) 838{ 839 struct uhci_qh *qh_lst; 840 struct uhci_qh *qh_rec; 841 842#ifdef USB_DEBUG 843 if (uhcinoloop) { 844 return; 845 } 846#endif 847 if (++(sc->sc_loops) == 1) { 848 DPRINTFN(6, "add\n"); 849 850 qh_lst = sc->sc_last_qh_p; 851 qh_rec = sc->sc_reclaim_qh_p; 852 853 /* NOTE: we don't loop back the soft pointer */ 854 855 qh_lst->qh_h_next = qh_rec->qh_self; 856 usb_pc_cpu_flush(qh_lst->page_cache); 857 } 858} 859 860static void 861uhci_rem_loop(uhci_softc_t *sc) 862{ 863 struct uhci_qh *qh_lst; 864 865#ifdef USB_DEBUG 866 if (uhcinoloop) { 867 return; 868 } 869#endif 870 if (--(sc->sc_loops) == 0) { 871 DPRINTFN(6, "remove\n"); 872 873 qh_lst = sc->sc_last_qh_p; 874 qh_lst->qh_h_next = htole32(UHCI_PTR_T); 875 usb_pc_cpu_flush(qh_lst->page_cache); 876 } 877} 878 879static void 880uhci_transfer_intr_enqueue(struct usb_xfer *xfer) 881{ 882 /* check for early completion */ 883 if (uhci_check_transfer(xfer)) { 884 return; 885 } 886 /* put transfer on interrupt queue */ 887 usbd_transfer_enqueue(&xfer->xroot->bus->intr_q, xfer); 888 889 /* start timeout, if any */ 890 if (xfer->timeout != 0) { 891 usbd_transfer_timeout_ms(xfer, &uhci_timeout, xfer->timeout); 892 } 893} 894 895#define UHCI_APPEND_TD(std,last) (last) = _uhci_append_td(std,last) 896static uhci_td_t * 897_uhci_append_td(uhci_td_t *std, uhci_td_t *last) 898{ 899 DPRINTFN(11, "%p to %p\n", std, last); 900 901 /* (sc->sc_bus.mtx) must be locked */ 902 903 std->next = last->next; 904 std->td_next = last->td_next; 905 906 std->prev = last; 907 908 usb_pc_cpu_flush(std->page_cache); 909 910 /* 911 * the last->next->prev is never followed: std->next->prev = std; 912 */ 913 last->next = std; 914 last->td_next = std->td_self; 915 916 usb_pc_cpu_flush(last->page_cache); 917 918 return (std); 919} 920 921#define UHCI_APPEND_QH(sqh,last) (last) = _uhci_append_qh(sqh,last) 922static uhci_qh_t * 923_uhci_append_qh(uhci_qh_t *sqh, uhci_qh_t *last) 924{ 925 DPRINTFN(11, "%p to %p\n", sqh, last); 926 927 if (sqh->h_prev != NULL) { 928 /* should not happen */ 929 DPRINTFN(0, "QH already linked!\n"); 930 return (last); 931 } 932 /* (sc->sc_bus.mtx) must be locked */ 933 934 sqh->h_next = last->h_next; 935 sqh->qh_h_next = last->qh_h_next; 936 937 sqh->h_prev = last; 938 939 usb_pc_cpu_flush(sqh->page_cache); 940 941 /* 942 * The "last->h_next->h_prev" is never followed: 943 * 944 * "sqh->h_next->h_prev" = sqh; 945 */ 946 947 last->h_next = sqh; 948 last->qh_h_next = sqh->qh_self; 949 950 usb_pc_cpu_flush(last->page_cache); 951 952 return (sqh); 953} 954 955/**/ 956 957#define UHCI_REMOVE_TD(std,last) (last) = _uhci_remove_td(std,last) 958static uhci_td_t * 959_uhci_remove_td(uhci_td_t *std, uhci_td_t *last) 960{ 961 DPRINTFN(11, "%p from %p\n", std, last); 962 963 /* (sc->sc_bus.mtx) must be locked */ 964 965 std->prev->next = std->next; 966 std->prev->td_next = std->td_next; 967 968 usb_pc_cpu_flush(std->prev->page_cache); 969 970 if (std->next) { 971 std->next->prev = std->prev; 972 usb_pc_cpu_flush(std->next->page_cache); 973 } 974 return ((last == std) ? std->prev : last); 975} 976 977#define UHCI_REMOVE_QH(sqh,last) (last) = _uhci_remove_qh(sqh,last) 978static uhci_qh_t * 979_uhci_remove_qh(uhci_qh_t *sqh, uhci_qh_t *last) 980{ 981 DPRINTFN(11, "%p from %p\n", sqh, last); 982 983 /* (sc->sc_bus.mtx) must be locked */ 984 985 /* only remove if not removed from a queue */ 986 if (sqh->h_prev) { 987 988 sqh->h_prev->h_next = sqh->h_next; 989 sqh->h_prev->qh_h_next = sqh->qh_h_next; 990 991 usb_pc_cpu_flush(sqh->h_prev->page_cache); 992 993 if (sqh->h_next) { 994 sqh->h_next->h_prev = sqh->h_prev; 995 usb_pc_cpu_flush(sqh->h_next->page_cache); 996 } 997 last = ((last == sqh) ? sqh->h_prev : last); 998 999 sqh->h_prev = 0; 1000 1001 usb_pc_cpu_flush(sqh->page_cache); 1002 } 1003 return (last); 1004} 1005 1006static void 1007uhci_isoc_done(uhci_softc_t *sc, struct usb_xfer *xfer) 1008{ 1009 struct usb_page_search res; 1010 uint32_t nframes = xfer->nframes; 1011 uint32_t status; 1012 uint32_t offset = 0; 1013 uint32_t *plen = xfer->frlengths; 1014 uint16_t len = 0; 1015 uhci_td_t *td = xfer->td_transfer_first; 1016 uhci_td_t **pp_last = &sc->sc_isoc_p_last[xfer->qh_pos]; 1017 1018 DPRINTFN(13, "xfer=%p endpoint=%p transfer done\n", 1019 xfer, xfer->endpoint); 1020 1021 /* sync any DMA memory before doing fixups */ 1022 1023 usb_bdma_post_sync(xfer); 1024 1025 while (nframes--) { 1026 if (td == NULL) { 1027 panic("%s:%d: out of TD's\n", 1028 __FUNCTION__, __LINE__); 1029 } 1030 if (pp_last >= &sc->sc_isoc_p_last[UHCI_VFRAMELIST_COUNT]) { 1031 pp_last = &sc->sc_isoc_p_last[0]; 1032 } 1033#ifdef USB_DEBUG 1034 if (uhcidebug > 5) { 1035 DPRINTF("isoc TD\n"); 1036 uhci_dump_td(td); 1037 } 1038#endif 1039 usb_pc_cpu_invalidate(td->page_cache); 1040 status = le32toh(td->td_status); 1041 1042 len = UHCI_TD_GET_ACTLEN(status); 1043 1044 if (len > *plen) { 1045 len = *plen; 1046 } 1047 if (td->fix_pc) { 1048 1049 usbd_get_page(td->fix_pc, 0, &res); 1050 1051 /* copy data from fixup location to real location */ 1052 1053 usb_pc_cpu_invalidate(td->fix_pc); 1054 1055 usbd_copy_in(xfer->frbuffers, offset, 1056 res.buffer, len); 1057 } 1058 offset += *plen; 1059 1060 *plen = len; 1061 1062 /* remove TD from schedule */ 1063 UHCI_REMOVE_TD(td, *pp_last); 1064 1065 pp_last++; 1066 plen++; 1067 td = td->obj_next; 1068 } 1069 1070 xfer->aframes = xfer->nframes; 1071} 1072 1073static usb_error_t 1074uhci_non_isoc_done_sub(struct usb_xfer *xfer) 1075{ 1076 struct usb_page_search res; 1077 uhci_td_t *td; 1078 uhci_td_t *td_alt_next; 1079 uint32_t status; 1080 uint32_t token; 1081 uint16_t len; 1082 1083 td = xfer->td_transfer_cache; 1084 td_alt_next = td->alt_next; 1085 1086 if (xfer->aframes != xfer->nframes) { 1087 usbd_xfer_set_frame_len(xfer, xfer->aframes, 0); 1088 } 1089 while (1) { 1090 1091 usb_pc_cpu_invalidate(td->page_cache); 1092 status = le32toh(td->td_status); 1093 token = le32toh(td->td_token); 1094 1095 /* 1096 * Verify the status and add 1097 * up the actual length: 1098 */ 1099 1100 len = UHCI_TD_GET_ACTLEN(status); 1101 if (len > td->len) { 1102 /* should not happen */ 1103 DPRINTF("Invalid status length, " 1104 "0x%04x/0x%04x bytes\n", len, td->len); 1105 status |= UHCI_TD_STALLED; 1106 1107 } else if ((xfer->aframes != xfer->nframes) && (len > 0)) { 1108 1109 if (td->fix_pc) { 1110 1111 usbd_get_page(td->fix_pc, 0, &res); 1112 1113 /* 1114 * copy data from fixup location to real 1115 * location 1116 */ 1117 1118 usb_pc_cpu_invalidate(td->fix_pc); 1119 1120 usbd_copy_in(xfer->frbuffers + xfer->aframes, 1121 xfer->frlengths[xfer->aframes], res.buffer, len); 1122 } 1123 /* update actual length */ 1124 1125 xfer->frlengths[xfer->aframes] += len; 1126 } 1127 /* Check for last transfer */ 1128 if (((void *)td) == xfer->td_transfer_last) { 1129 td = NULL; 1130 break; 1131 } 1132 if (status & UHCI_TD_STALLED) { 1133 /* the transfer is finished */ 1134 td = NULL; 1135 break; 1136 } 1137 /* Check for short transfer */ 1138 if (len != td->len) { 1139 if (xfer->flags_int.short_frames_ok) { 1140 /* follow alt next */ 1141 td = td->alt_next; 1142 } else { 1143 /* the transfer is finished */ 1144 td = NULL; 1145 } 1146 break; 1147 } 1148 td = td->obj_next; 1149 1150 if (td->alt_next != td_alt_next) { 1151 /* this USB frame is complete */ 1152 break; 1153 } 1154 } 1155 1156 /* update transfer cache */ 1157 1158 xfer->td_transfer_cache = td; 1159 1160 /* update data toggle */ 1161 1162 xfer->endpoint->toggle_next = (token & UHCI_TD_SET_DT(1)) ? 0 : 1; 1163 1164#ifdef USB_DEBUG 1165 if (status & UHCI_TD_ERROR) { 1166 DPRINTFN(11, "error, addr=%d, endpt=0x%02x, frame=0x%02x " 1167 "status=%s%s%s%s%s%s%s%s%s%s%s\n", 1168 xfer->address, xfer->endpointno, xfer->aframes, 1169 (status & UHCI_TD_BITSTUFF) ? "[BITSTUFF]" : "", 1170 (status & UHCI_TD_CRCTO) ? "[CRCTO]" : "", 1171 (status & UHCI_TD_NAK) ? "[NAK]" : "", 1172 (status & UHCI_TD_BABBLE) ? "[BABBLE]" : "", 1173 (status & UHCI_TD_DBUFFER) ? "[DBUFFER]" : "", 1174 (status & UHCI_TD_STALLED) ? "[STALLED]" : "", 1175 (status & UHCI_TD_ACTIVE) ? "[ACTIVE]" : "[NOT_ACTIVE]", 1176 (status & UHCI_TD_IOC) ? "[IOC]" : "", 1177 (status & UHCI_TD_IOS) ? "[IOS]" : "", 1178 (status & UHCI_TD_LS) ? "[LS]" : "", 1179 (status & UHCI_TD_SPD) ? "[SPD]" : ""); 1180 } 1181#endif 1182 return (status & UHCI_TD_STALLED) ? 1183 USB_ERR_STALLED : USB_ERR_NORMAL_COMPLETION; 1184} 1185 1186static void 1187uhci_non_isoc_done(struct usb_xfer *xfer) 1188{ 1189 usb_error_t err = 0; 1190 1191 DPRINTFN(13, "xfer=%p endpoint=%p transfer done\n", 1192 xfer, xfer->endpoint); 1193 1194#ifdef USB_DEBUG 1195 if (uhcidebug > 10) { 1196 uhci_dump_tds(xfer->td_transfer_first); 1197 } 1198#endif 1199 1200 /* sync any DMA memory before doing fixups */ 1201 1202 usb_bdma_post_sync(xfer); 1203 1204 /* reset scanner */ 1205 1206 xfer->td_transfer_cache = xfer->td_transfer_first; 1207 1208 if (xfer->flags_int.control_xfr) { 1209 if (xfer->flags_int.control_hdr) { 1210 1211 err = uhci_non_isoc_done_sub(xfer); 1212 } 1213 xfer->aframes = 1; 1214 1215 if (xfer->td_transfer_cache == NULL) { 1216 goto done; 1217 } 1218 } 1219 while (xfer->aframes != xfer->nframes) { 1220 1221 err = uhci_non_isoc_done_sub(xfer); 1222 xfer->aframes++; 1223 1224 if (xfer->td_transfer_cache == NULL) { 1225 goto done; 1226 } 1227 } 1228 1229 if (xfer->flags_int.control_xfr && 1230 !xfer->flags_int.control_act) { 1231 1232 err = uhci_non_isoc_done_sub(xfer); 1233 } 1234done: 1235 uhci_device_done(xfer, err); 1236} 1237 1238/*------------------------------------------------------------------------* 1239 * uhci_check_transfer_sub 1240 * 1241 * The main purpose of this function is to update the data-toggle 1242 * in case it is wrong. 1243 *------------------------------------------------------------------------*/ 1244static void 1245uhci_check_transfer_sub(struct usb_xfer *xfer) 1246{ 1247 uhci_qh_t *qh; 1248 uhci_td_t *td; 1249 uhci_td_t *td_alt_next; 1250 1251 uint32_t td_token; 1252 uint32_t td_self; 1253 1254 td = xfer->td_transfer_cache; 1255 qh = xfer->qh_start[xfer->flags_int.curr_dma_set]; 1256 1257 td_token = td->obj_next->td_token; 1258 td = td->alt_next; 1259 xfer->td_transfer_cache = td; 1260 td_self = td->td_self; 1261 td_alt_next = td->alt_next; 1262 1263 if (xfer->flags_int.control_xfr) 1264 goto skip; /* don't touch the DT value! */ 1265 1266 if (!((td->td_token ^ td_token) & htole32(UHCI_TD_SET_DT(1)))) 1267 goto skip; /* data toggle has correct value */ 1268 1269 /* 1270 * The data toggle is wrong and we need to toggle it ! 1271 */ 1272 while (1) { 1273 1274 td->td_token ^= htole32(UHCI_TD_SET_DT(1)); 1275 usb_pc_cpu_flush(td->page_cache); 1276 1277 if (td == xfer->td_transfer_last) { 1278 /* last transfer */ 1279 break; 1280 } 1281 td = td->obj_next; 1282 1283 if (td->alt_next != td_alt_next) { 1284 /* next frame */ 1285 break; 1286 } 1287 } 1288skip: 1289 1290 /* update the QH */ 1291 qh->qh_e_next = td_self; 1292 usb_pc_cpu_flush(qh->page_cache); 1293 1294 DPRINTFN(13, "xfer=%p following alt next\n", xfer); 1295} 1296 1297/*------------------------------------------------------------------------* 1298 * uhci_check_transfer 1299 * 1300 * Return values: 1301 * 0: USB transfer is not finished 1302 * Else: USB transfer is finished 1303 *------------------------------------------------------------------------*/ 1304static uint8_t 1305uhci_check_transfer(struct usb_xfer *xfer) 1306{ 1307 uint32_t status; 1308 uint32_t token; 1309 uhci_td_t *td; 1310 1311 DPRINTFN(16, "xfer=%p checking transfer\n", xfer); 1312 1313 if (xfer->endpoint->methods == &uhci_device_isoc_methods) { 1314 /* isochronous transfer */ 1315 1316 td = xfer->td_transfer_last; 1317 1318 usb_pc_cpu_invalidate(td->page_cache); 1319 status = le32toh(td->td_status); 1320 1321 /* check also if the first is complete */ 1322 1323 td = xfer->td_transfer_first; 1324 1325 usb_pc_cpu_invalidate(td->page_cache); 1326 status |= le32toh(td->td_status); 1327 1328 if (!(status & UHCI_TD_ACTIVE)) { 1329 uhci_device_done(xfer, USB_ERR_NORMAL_COMPLETION); 1330 goto transferred; 1331 } 1332 } else { 1333 /* non-isochronous transfer */ 1334 1335 /* 1336 * check whether there is an error somewhere 1337 * in the middle, or whether there was a short 1338 * packet (SPD and not ACTIVE) 1339 */ 1340 td = xfer->td_transfer_cache; 1341 1342 while (1) { 1343 usb_pc_cpu_invalidate(td->page_cache); 1344 status = le32toh(td->td_status); 1345 token = le32toh(td->td_token); 1346 1347 /* 1348 * if there is an active TD the transfer isn't done 1349 */ 1350 if (status & UHCI_TD_ACTIVE) { 1351 /* update cache */ 1352 xfer->td_transfer_cache = td; 1353 goto done; 1354 } 1355 /* 1356 * last transfer descriptor makes the transfer done 1357 */ 1358 if (((void *)td) == xfer->td_transfer_last) { 1359 break; 1360 } 1361 /* 1362 * any kind of error makes the transfer done 1363 */ 1364 if (status & UHCI_TD_STALLED) { 1365 break; 1366 } 1367 /* 1368 * check if we reached the last packet 1369 * or if there is a short packet: 1370 */ 1371 if ((td->td_next == htole32(UHCI_PTR_T)) || 1372 (UHCI_TD_GET_ACTLEN(status) < td->len)) { 1373 1374 if (xfer->flags_int.short_frames_ok) { 1375 /* follow alt next */ 1376 if (td->alt_next) { 1377 /* update cache */ 1378 xfer->td_transfer_cache = td; 1379 uhci_check_transfer_sub(xfer); 1380 goto done; 1381 } 1382 } 1383 /* transfer is done */ 1384 break; 1385 } 1386 td = td->obj_next; 1387 } 1388 uhci_non_isoc_done(xfer); 1389 goto transferred; 1390 } 1391 1392done: 1393 DPRINTFN(13, "xfer=%p is still active\n", xfer); 1394 return (0); 1395 1396transferred: 1397 return (1); 1398} 1399 1400static void 1401uhci_interrupt_poll(uhci_softc_t *sc) 1402{ 1403 struct usb_xfer *xfer; 1404 1405repeat: 1406 TAILQ_FOREACH(xfer, &sc->sc_bus.intr_q.head, wait_entry) { 1407 /* 1408 * check if transfer is transferred 1409 */ 1410 if (uhci_check_transfer(xfer)) { 1411 /* queue has been modified */ 1412 goto repeat; 1413 } 1414 } 1415} 1416 1417/*------------------------------------------------------------------------* 1418 * uhci_interrupt - UHCI interrupt handler 1419 * 1420 * NOTE: Do not access "sc->sc_bus.bdev" inside the interrupt handler, 1421 * hence the interrupt handler will be setup before "sc->sc_bus.bdev" 1422 * is present ! 1423 *------------------------------------------------------------------------*/ 1424void 1425uhci_interrupt(uhci_softc_t *sc) 1426{ 1427 uint32_t status; 1428 1429 USB_BUS_LOCK(&sc->sc_bus); 1430 1431 DPRINTFN(16, "real interrupt\n"); 1432 1433#ifdef USB_DEBUG 1434 if (uhcidebug > 15) { 1435 uhci_dumpregs(sc); 1436 } 1437#endif 1438 status = UREAD2(sc, UHCI_STS) & UHCI_STS_ALLINTRS; 1439 if (status == 0) { 1440 /* the interrupt was not for us */ 1441 goto done; 1442 } 1443 if (status & (UHCI_STS_RD | UHCI_STS_HSE | 1444 UHCI_STS_HCPE | UHCI_STS_HCH)) { 1445 1446 if (status & UHCI_STS_RD) { 1447#ifdef USB_DEBUG 1448 printf("%s: resume detect\n", 1449 __FUNCTION__); 1450#endif 1451 } 1452 if (status & UHCI_STS_HSE) { 1453 printf("%s: host system error\n", 1454 __FUNCTION__); 1455 } 1456 if (status & UHCI_STS_HCPE) { 1457 printf("%s: host controller process error\n", 1458 __FUNCTION__); 1459 } 1460 if (status & UHCI_STS_HCH) { 1461 /* no acknowledge needed */ 1462 DPRINTF("%s: host controller halted\n", 1463 __FUNCTION__); 1464#ifdef USB_DEBUG 1465 if (uhcidebug > 0) { 1466 uhci_dump_all(sc); 1467 } 1468#endif 1469 } 1470 } 1471 /* get acknowledge bits */ 1472 status &= (UHCI_STS_USBINT | 1473 UHCI_STS_USBEI | 1474 UHCI_STS_RD | 1475 UHCI_STS_HSE | 1476 UHCI_STS_HCPE); 1477 1478 if (status == 0) { 1479 /* nothing to acknowledge */ 1480 goto done; 1481 } 1482 /* acknowledge interrupts */ 1483 UWRITE2(sc, UHCI_STS, status); 1484 1485 /* poll all the USB transfers */ 1486 uhci_interrupt_poll(sc); 1487 1488done: 1489 USB_BUS_UNLOCK(&sc->sc_bus); 1490} 1491 1492/* 1493 * called when a request does not complete 1494 */ 1495static void 1496uhci_timeout(void *arg) 1497{ 1498 struct usb_xfer *xfer = arg; 1499 1500 DPRINTF("xfer=%p\n", xfer); 1501 1502 USB_BUS_LOCK_ASSERT(xfer->xroot->bus, MA_OWNED); 1503 1504 /* transfer is transferred */ 1505 uhci_device_done(xfer, USB_ERR_TIMEOUT); 1506} 1507 1508static void 1509uhci_do_poll(struct usb_bus *bus) 1510{ 1511 struct uhci_softc *sc = UHCI_BUS2SC(bus); 1512 1513 USB_BUS_LOCK(&sc->sc_bus); 1514 uhci_interrupt_poll(sc); 1515 USB_BUS_UNLOCK(&sc->sc_bus); 1516} 1517 1518static void 1519uhci_setup_standard_chain_sub(struct uhci_std_temp *temp) 1520{ 1521 uhci_td_t *td; 1522 uhci_td_t *td_next; 1523 uhci_td_t *td_alt_next; 1524 uint32_t average; 1525 uint32_t len_old; 1526 uint8_t shortpkt_old; 1527 uint8_t precompute; 1528 1529 td_alt_next = NULL; 1530 shortpkt_old = temp->shortpkt; 1531 len_old = temp->len; 1532 precompute = 1; 1533 1534 /* software is used to detect short incoming transfers */ 1535 1536 if ((temp->td_token & htole32(UHCI_TD_PID)) == htole32(UHCI_TD_PID_IN)) { 1537 temp->td_status |= htole32(UHCI_TD_SPD); 1538 } else { 1539 temp->td_status &= ~htole32(UHCI_TD_SPD); 1540 } 1541 1542 temp->ml.buf_offset = 0; 1543 1544restart: 1545 1546 temp->td_token &= ~htole32(UHCI_TD_SET_MAXLEN(0)); 1547 temp->td_token |= htole32(UHCI_TD_SET_MAXLEN(temp->average)); 1548 1549 td = temp->td; 1550 td_next = temp->td_next; 1551 1552 while (1) { 1553 1554 if (temp->len == 0) { 1555 1556 if (temp->shortpkt) { 1557 break; 1558 } 1559 /* send a Zero Length Packet, ZLP, last */ 1560 1561 temp->shortpkt = 1; 1562 temp->td_token |= htole32(UHCI_TD_SET_MAXLEN(0)); 1563 average = 0; 1564 1565 } else { 1566 1567 average = temp->average; 1568 1569 if (temp->len < average) { 1570 temp->shortpkt = 1; 1571 temp->td_token &= ~htole32(UHCI_TD_SET_MAXLEN(0)); 1572 temp->td_token |= htole32(UHCI_TD_SET_MAXLEN(temp->len)); 1573 average = temp->len; 1574 } 1575 } 1576 1577 if (td_next == NULL) { 1578 panic("%s: out of UHCI transfer descriptors!", __FUNCTION__); 1579 } 1580 /* get next TD */ 1581 1582 td = td_next; 1583 td_next = td->obj_next; 1584 1585 /* check if we are pre-computing */ 1586 1587 if (precompute) { 1588 1589 /* update remaining length */ 1590 1591 temp->len -= average; 1592 1593 continue; 1594 } 1595 /* fill out current TD */ 1596 1597 td->td_status = temp->td_status; 1598 td->td_token = temp->td_token; 1599 1600 /* update data toggle */ 1601 1602 temp->td_token ^= htole32(UHCI_TD_SET_DT(1)); 1603 1604 if (average == 0) { 1605 1606 td->len = 0; 1607 td->td_buffer = 0; 1608 td->fix_pc = NULL; 1609 1610 } else { 1611 1612 /* update remaining length */ 1613 1614 temp->len -= average; 1615 1616 td->len = average; 1617 1618 /* fill out buffer pointer and do fixup, if any */ 1619 1620 uhci_mem_layout_fixup(&temp->ml, td); 1621 } 1622 1623 td->alt_next = td_alt_next; 1624 1625 if ((td_next == td_alt_next) && temp->setup_alt_next) { 1626 /* we need to receive these frames one by one ! */ 1627 td->td_status |= htole32(UHCI_TD_IOC); 1628 td->td_next = htole32(UHCI_PTR_T); 1629 } else { 1630 if (td_next) { 1631 /* link the current TD with the next one */ 1632 td->td_next = td_next->td_self; 1633 } 1634 } 1635 1636 usb_pc_cpu_flush(td->page_cache); 1637 } 1638 1639 if (precompute) { 1640 precompute = 0; 1641 1642 /* setup alt next pointer, if any */ 1643 if (temp->last_frame) { 1644 td_alt_next = NULL; 1645 } else { 1646 /* we use this field internally */ 1647 td_alt_next = td_next; 1648 } 1649 1650 /* restore */ 1651 temp->shortpkt = shortpkt_old; 1652 temp->len = len_old; 1653 goto restart; 1654 } 1655 temp->td = td; 1656 temp->td_next = td_next; 1657} 1658 1659static uhci_td_t * 1660uhci_setup_standard_chain(struct usb_xfer *xfer) 1661{ 1662 struct uhci_std_temp temp; 1663 uhci_td_t *td; 1664 uint32_t x; 1665 1666 DPRINTFN(9, "addr=%d endpt=%d sumlen=%d speed=%d\n", 1667 xfer->address, UE_GET_ADDR(xfer->endpointno), 1668 xfer->sumlen, usbd_get_speed(xfer->xroot->udev)); 1669 1670 temp.average = xfer->max_frame_size; 1671 temp.max_frame_size = xfer->max_frame_size; 1672 1673 /* toggle the DMA set we are using */ 1674 xfer->flags_int.curr_dma_set ^= 1; 1675 1676 /* get next DMA set */ 1677 td = xfer->td_start[xfer->flags_int.curr_dma_set]; 1678 xfer->td_transfer_first = td; 1679 xfer->td_transfer_cache = td; 1680 1681 temp.td = NULL; 1682 temp.td_next = td; 1683 temp.last_frame = 0; 1684 temp.setup_alt_next = xfer->flags_int.short_frames_ok; 1685 1686 uhci_mem_layout_init(&temp.ml, xfer); 1687 1688 temp.td_status = 1689 htole32(UHCI_TD_ZERO_ACTLEN(UHCI_TD_SET_ERRCNT(3) | 1690 UHCI_TD_ACTIVE)); 1691 1692 if (xfer->xroot->udev->speed == USB_SPEED_LOW) { 1693 temp.td_status |= htole32(UHCI_TD_LS); 1694 } 1695 temp.td_token = 1696 htole32(UHCI_TD_SET_ENDPT(xfer->endpointno) | 1697 UHCI_TD_SET_DEVADDR(xfer->address)); 1698 1699 if (xfer->endpoint->toggle_next) { 1700 /* DATA1 is next */ 1701 temp.td_token |= htole32(UHCI_TD_SET_DT(1)); 1702 } 1703 /* check if we should prepend a setup message */ 1704 1705 if (xfer->flags_int.control_xfr) { 1706 1707 if (xfer->flags_int.control_hdr) { 1708 1709 temp.td_token &= htole32(UHCI_TD_SET_DEVADDR(0x7F) | 1710 UHCI_TD_SET_ENDPT(0xF)); 1711 temp.td_token |= htole32(UHCI_TD_PID_SETUP | 1712 UHCI_TD_SET_DT(0)); 1713 1714 temp.len = xfer->frlengths[0]; 1715 temp.ml.buf_pc = xfer->frbuffers + 0; 1716 temp.shortpkt = temp.len ? 1 : 0; 1717 /* check for last frame */ 1718 if (xfer->nframes == 1) { 1719 /* no STATUS stage yet, SETUP is last */ 1720 if (xfer->flags_int.control_act) { 1721 temp.last_frame = 1; 1722 temp.setup_alt_next = 0; 1723 } 1724 } 1725 uhci_setup_standard_chain_sub(&temp); 1726 } 1727 x = 1; 1728 } else { 1729 x = 0; 1730 } 1731 1732 while (x != xfer->nframes) { 1733 1734 /* DATA0 / DATA1 message */ 1735 1736 temp.len = xfer->frlengths[x]; 1737 temp.ml.buf_pc = xfer->frbuffers + x; 1738 1739 x++; 1740 1741 if (x == xfer->nframes) { 1742 if (xfer->flags_int.control_xfr) { 1743 /* no STATUS stage yet, DATA is last */ 1744 if (xfer->flags_int.control_act) { 1745 temp.last_frame = 1; 1746 temp.setup_alt_next = 0; 1747 } 1748 } else { 1749 temp.last_frame = 1; 1750 temp.setup_alt_next = 0; 1751 } 1752 } 1753 /* 1754 * Keep previous data toggle, 1755 * device address and endpoint number: 1756 */ 1757 1758 temp.td_token &= htole32(UHCI_TD_SET_DEVADDR(0x7F) | 1759 UHCI_TD_SET_ENDPT(0xF) | 1760 UHCI_TD_SET_DT(1)); 1761 1762 if (temp.len == 0) { 1763 1764 /* make sure that we send an USB packet */ 1765 1766 temp.shortpkt = 0; 1767 1768 } else { 1769 1770 /* regular data transfer */ 1771 1772 temp.shortpkt = (xfer->flags.force_short_xfer) ? 0 : 1; 1773 } 1774 1775 /* set endpoint direction */ 1776 1777 temp.td_token |= 1778 (UE_GET_DIR(xfer->endpointno) == UE_DIR_IN) ? 1779 htole32(UHCI_TD_PID_IN) : 1780 htole32(UHCI_TD_PID_OUT); 1781 1782 uhci_setup_standard_chain_sub(&temp); 1783 } 1784 1785 /* check if we should append a status stage */ 1786 1787 if (xfer->flags_int.control_xfr && 1788 !xfer->flags_int.control_act) { 1789 1790 /* 1791 * send a DATA1 message and reverse the current endpoint 1792 * direction 1793 */ 1794 1795 temp.td_token &= htole32(UHCI_TD_SET_DEVADDR(0x7F) | 1796 UHCI_TD_SET_ENDPT(0xF) | 1797 UHCI_TD_SET_DT(1)); 1798 temp.td_token |= 1799 (UE_GET_DIR(xfer->endpointno) == UE_DIR_OUT) ? 1800 htole32(UHCI_TD_PID_IN | UHCI_TD_SET_DT(1)) : 1801 htole32(UHCI_TD_PID_OUT | UHCI_TD_SET_DT(1)); 1802 1803 temp.len = 0; 1804 temp.ml.buf_pc = NULL; 1805 temp.shortpkt = 0; 1806 temp.last_frame = 1; 1807 temp.setup_alt_next = 0; 1808 1809 uhci_setup_standard_chain_sub(&temp); 1810 } 1811 td = temp.td; 1812 1813 /* Ensure that last TD is terminating: */ 1814 td->td_next = htole32(UHCI_PTR_T); 1815 1816 /* set interrupt bit */ 1817 1818 td->td_status |= htole32(UHCI_TD_IOC); 1819 1820 usb_pc_cpu_flush(td->page_cache); 1821 1822 /* must have at least one frame! */ 1823 1824 xfer->td_transfer_last = td; 1825 1826#ifdef USB_DEBUG 1827 if (uhcidebug > 8) { 1828 DPRINTF("nexttog=%d; data before transfer:\n", 1829 xfer->endpoint->toggle_next); 1830 uhci_dump_tds(xfer->td_transfer_first); 1831 } 1832#endif 1833 return (xfer->td_transfer_first); 1834} 1835 1836/* NOTE: "done" can be run two times in a row, 1837 * from close and from interrupt 1838 */ 1839 1840static void 1841uhci_device_done(struct usb_xfer *xfer, usb_error_t error) 1842{ 1843 struct usb_pipe_methods *methods = xfer->endpoint->methods; 1844 uhci_softc_t *sc = UHCI_BUS2SC(xfer->xroot->bus); 1845 uhci_qh_t *qh; 1846 1847 USB_BUS_LOCK_ASSERT(&sc->sc_bus, MA_OWNED); 1848 1849 DPRINTFN(2, "xfer=%p, endpoint=%p, error=%d\n", 1850 xfer, xfer->endpoint, error); 1851 1852 qh = xfer->qh_start[xfer->flags_int.curr_dma_set]; 1853 if (qh) { 1854 usb_pc_cpu_invalidate(qh->page_cache); 1855 } 1856 if (xfer->flags_int.bandwidth_reclaimed) { 1857 xfer->flags_int.bandwidth_reclaimed = 0; 1858 uhci_rem_loop(sc); 1859 } 1860 if (methods == &uhci_device_bulk_methods) { 1861 UHCI_REMOVE_QH(qh, sc->sc_bulk_p_last); 1862 } 1863 if (methods == &uhci_device_ctrl_methods) { 1864 if (xfer->xroot->udev->speed == USB_SPEED_LOW) { 1865 UHCI_REMOVE_QH(qh, sc->sc_ls_ctl_p_last); 1866 } else { 1867 UHCI_REMOVE_QH(qh, sc->sc_fs_ctl_p_last); 1868 } 1869 } 1870 if (methods == &uhci_device_intr_methods) { 1871 UHCI_REMOVE_QH(qh, sc->sc_intr_p_last[xfer->qh_pos]); 1872 } 1873 /* 1874 * Only finish isochronous transfers once 1875 * which will update "xfer->frlengths". 1876 */ 1877 if (xfer->td_transfer_first && 1878 xfer->td_transfer_last) { 1879 if (methods == &uhci_device_isoc_methods) { 1880 uhci_isoc_done(sc, xfer); 1881 } 1882 xfer->td_transfer_first = NULL; 1883 xfer->td_transfer_last = NULL; 1884 } 1885 /* dequeue transfer and start next transfer */ 1886 usbd_transfer_done(xfer, error); 1887} 1888 1889/*------------------------------------------------------------------------* 1890 * uhci bulk support 1891 *------------------------------------------------------------------------*/ 1892static void 1893uhci_device_bulk_open(struct usb_xfer *xfer) 1894{ 1895 return; 1896} 1897 1898static void 1899uhci_device_bulk_close(struct usb_xfer *xfer) 1900{ 1901 uhci_device_done(xfer, USB_ERR_CANCELLED); 1902} 1903 1904static void 1905uhci_device_bulk_enter(struct usb_xfer *xfer) 1906{ 1907 return; 1908} 1909 1910static void 1911uhci_device_bulk_start(struct usb_xfer *xfer) 1912{ 1913 uhci_softc_t *sc = UHCI_BUS2SC(xfer->xroot->bus); 1914 uhci_td_t *td; 1915 uhci_qh_t *qh; 1916 1917 /* setup TD's */ 1918 td = uhci_setup_standard_chain(xfer); 1919 1920 /* setup QH */ 1921 qh = xfer->qh_start[xfer->flags_int.curr_dma_set]; 1922 1923 qh->e_next = td; 1924 qh->qh_e_next = td->td_self; 1925 1926 if (xfer->xroot->udev->flags.self_suspended == 0) { 1927 UHCI_APPEND_QH(qh, sc->sc_bulk_p_last); 1928 uhci_add_loop(sc); 1929 xfer->flags_int.bandwidth_reclaimed = 1; 1930 } else { 1931 usb_pc_cpu_flush(qh->page_cache); 1932 } 1933 1934 /* put transfer on interrupt queue */ 1935 uhci_transfer_intr_enqueue(xfer); 1936} 1937 1938struct usb_pipe_methods uhci_device_bulk_methods = 1939{ 1940 .open = uhci_device_bulk_open, 1941 .close = uhci_device_bulk_close, 1942 .enter = uhci_device_bulk_enter, 1943 .start = uhci_device_bulk_start, 1944}; 1945 1946/*------------------------------------------------------------------------* 1947 * uhci control support 1948 *------------------------------------------------------------------------*/ 1949static void 1950uhci_device_ctrl_open(struct usb_xfer *xfer) 1951{ 1952 return; 1953} 1954 1955static void 1956uhci_device_ctrl_close(struct usb_xfer *xfer) 1957{ 1958 uhci_device_done(xfer, USB_ERR_CANCELLED); 1959} 1960 1961static void 1962uhci_device_ctrl_enter(struct usb_xfer *xfer) 1963{ 1964 return; 1965} 1966 1967static void 1968uhci_device_ctrl_start(struct usb_xfer *xfer) 1969{ 1970 uhci_softc_t *sc = UHCI_BUS2SC(xfer->xroot->bus); 1971 uhci_qh_t *qh; 1972 uhci_td_t *td; 1973 1974 /* setup TD's */ 1975 td = uhci_setup_standard_chain(xfer); 1976 1977 /* setup QH */ 1978 qh = xfer->qh_start[xfer->flags_int.curr_dma_set]; 1979 1980 qh->e_next = td; 1981 qh->qh_e_next = td->td_self; 1982 1983 /* 1984 * NOTE: some devices choke on bandwidth- reclamation for control 1985 * transfers 1986 */ 1987 if (xfer->xroot->udev->flags.self_suspended == 0) { 1988 if (xfer->xroot->udev->speed == USB_SPEED_LOW) { 1989 UHCI_APPEND_QH(qh, sc->sc_ls_ctl_p_last); 1990 } else { 1991 UHCI_APPEND_QH(qh, sc->sc_fs_ctl_p_last); 1992 } 1993 } else { 1994 usb_pc_cpu_flush(qh->page_cache); 1995 } 1996 /* put transfer on interrupt queue */ 1997 uhci_transfer_intr_enqueue(xfer); 1998} 1999 2000struct usb_pipe_methods uhci_device_ctrl_methods = 2001{ 2002 .open = uhci_device_ctrl_open, 2003 .close = uhci_device_ctrl_close, 2004 .enter = uhci_device_ctrl_enter, 2005 .start = uhci_device_ctrl_start, 2006}; 2007 2008/*------------------------------------------------------------------------* 2009 * uhci interrupt support 2010 *------------------------------------------------------------------------*/ 2011static void 2012uhci_device_intr_open(struct usb_xfer *xfer) 2013{ 2014 uhci_softc_t *sc = UHCI_BUS2SC(xfer->xroot->bus); 2015 uint16_t best; 2016 uint16_t bit; 2017 uint16_t x; 2018 2019 best = 0; 2020 bit = UHCI_IFRAMELIST_COUNT / 2; 2021 while (bit) { 2022 if (xfer->interval >= bit) { 2023 x = bit; 2024 best = bit; 2025 while (x & bit) { 2026 if (sc->sc_intr_stat[x] < 2027 sc->sc_intr_stat[best]) { 2028 best = x; 2029 } 2030 x++; 2031 } 2032 break; 2033 } 2034 bit >>= 1; 2035 } 2036 2037 sc->sc_intr_stat[best]++; 2038 xfer->qh_pos = best; 2039 2040 DPRINTFN(3, "best=%d interval=%d\n", 2041 best, xfer->interval); 2042} 2043 2044static void 2045uhci_device_intr_close(struct usb_xfer *xfer) 2046{ 2047 uhci_softc_t *sc = UHCI_BUS2SC(xfer->xroot->bus); 2048 2049 sc->sc_intr_stat[xfer->qh_pos]--; 2050 2051 uhci_device_done(xfer, USB_ERR_CANCELLED); 2052} 2053 2054static void 2055uhci_device_intr_enter(struct usb_xfer *xfer) 2056{ 2057 return; 2058} 2059 2060static void 2061uhci_device_intr_start(struct usb_xfer *xfer) 2062{ 2063 uhci_softc_t *sc = UHCI_BUS2SC(xfer->xroot->bus); 2064 uhci_qh_t *qh; 2065 uhci_td_t *td; 2066 2067 /* setup TD's */ 2068 td = uhci_setup_standard_chain(xfer); 2069 2070 /* setup QH */ 2071 qh = xfer->qh_start[xfer->flags_int.curr_dma_set]; 2072 2073 qh->e_next = td; 2074 qh->qh_e_next = td->td_self; 2075 2076 if (xfer->xroot->udev->flags.self_suspended == 0) { 2077 /* enter QHs into the controller data structures */ 2078 UHCI_APPEND_QH(qh, sc->sc_intr_p_last[xfer->qh_pos]); 2079 } else { 2080 usb_pc_cpu_flush(qh->page_cache); 2081 } 2082 2083 /* put transfer on interrupt queue */ 2084 uhci_transfer_intr_enqueue(xfer); 2085} 2086 2087struct usb_pipe_methods uhci_device_intr_methods = 2088{ 2089 .open = uhci_device_intr_open, 2090 .close = uhci_device_intr_close, 2091 .enter = uhci_device_intr_enter, 2092 .start = uhci_device_intr_start, 2093}; 2094 2095/*------------------------------------------------------------------------* 2096 * uhci isochronous support 2097 *------------------------------------------------------------------------*/ 2098static void 2099uhci_device_isoc_open(struct usb_xfer *xfer) 2100{ 2101 uhci_td_t *td; 2102 uint32_t td_token; 2103 uint8_t ds; 2104 2105 td_token = 2106 (UE_GET_DIR(xfer->endpointno) == UE_DIR_IN) ? 2107 UHCI_TD_IN(0, xfer->endpointno, xfer->address, 0) : 2108 UHCI_TD_OUT(0, xfer->endpointno, xfer->address, 0); 2109 2110 td_token = htole32(td_token); 2111 2112 /* initialize all TD's */ 2113 2114 for (ds = 0; ds != 2; ds++) { 2115 2116 for (td = xfer->td_start[ds]; td; td = td->obj_next) { 2117 2118 /* mark TD as inactive */ 2119 td->td_status = htole32(UHCI_TD_IOS); 2120 td->td_token = td_token; 2121 2122 usb_pc_cpu_flush(td->page_cache); 2123 } 2124 } 2125} 2126 2127static void 2128uhci_device_isoc_close(struct usb_xfer *xfer) 2129{ 2130 uhci_device_done(xfer, USB_ERR_CANCELLED); 2131} 2132 2133static void 2134uhci_device_isoc_enter(struct usb_xfer *xfer) 2135{ 2136 struct uhci_mem_layout ml; 2137 uhci_softc_t *sc = UHCI_BUS2SC(xfer->xroot->bus); 2138 uint32_t nframes; 2139 uint32_t temp; 2140 uint32_t *plen; 2141 2142#ifdef USB_DEBUG 2143 uint8_t once = 1; 2144 2145#endif 2146 uhci_td_t *td; 2147 uhci_td_t *td_last = NULL; 2148 uhci_td_t **pp_last; 2149 2150 DPRINTFN(6, "xfer=%p next=%d nframes=%d\n", 2151 xfer, xfer->endpoint->isoc_next, xfer->nframes); 2152 2153 nframes = UREAD2(sc, UHCI_FRNUM); 2154 2155 temp = (nframes - xfer->endpoint->isoc_next) & 2156 (UHCI_VFRAMELIST_COUNT - 1); 2157 2158 if ((xfer->endpoint->is_synced == 0) || 2159 (temp < xfer->nframes)) { 2160 /* 2161 * If there is data underflow or the pipe queue is empty we 2162 * schedule the transfer a few frames ahead of the current 2163 * frame position. Else two isochronous transfers might 2164 * overlap. 2165 */ 2166 xfer->endpoint->isoc_next = (nframes + 3) & (UHCI_VFRAMELIST_COUNT - 1); 2167 xfer->endpoint->is_synced = 1; 2168 DPRINTFN(3, "start next=%d\n", xfer->endpoint->isoc_next); 2169 } 2170 /* 2171 * compute how many milliseconds the insertion is ahead of the 2172 * current frame position: 2173 */ 2174 temp = (xfer->endpoint->isoc_next - nframes) & 2175 (UHCI_VFRAMELIST_COUNT - 1); 2176 2177 /* 2178 * pre-compute when the isochronous transfer will be finished: 2179 */ 2180 xfer->isoc_time_complete = 2181 usb_isoc_time_expand(&sc->sc_bus, nframes) + temp + 2182 xfer->nframes; 2183 2184 /* get the real number of frames */ 2185 2186 nframes = xfer->nframes; 2187 2188 uhci_mem_layout_init(&ml, xfer); 2189 2190 plen = xfer->frlengths; 2191 2192 /* toggle the DMA set we are using */ 2193 xfer->flags_int.curr_dma_set ^= 1; 2194 2195 /* get next DMA set */ 2196 td = xfer->td_start[xfer->flags_int.curr_dma_set]; 2197 xfer->td_transfer_first = td; 2198 2199 pp_last = &sc->sc_isoc_p_last[xfer->endpoint->isoc_next]; 2200 2201 /* store starting position */ 2202 2203 xfer->qh_pos = xfer->endpoint->isoc_next; 2204 2205 while (nframes--) { 2206 if (td == NULL) { 2207 panic("%s:%d: out of TD's\n", 2208 __FUNCTION__, __LINE__); 2209 } 2210 if (pp_last >= &sc->sc_isoc_p_last[UHCI_VFRAMELIST_COUNT]) { 2211 pp_last = &sc->sc_isoc_p_last[0]; 2212 } 2213 if (*plen > xfer->max_frame_size) { 2214#ifdef USB_DEBUG 2215 if (once) { 2216 once = 0; 2217 printf("%s: frame length(%d) exceeds %d " 2218 "bytes (frame truncated)\n", 2219 __FUNCTION__, *plen, 2220 xfer->max_frame_size); 2221 } 2222#endif 2223 *plen = xfer->max_frame_size; 2224 } 2225 /* reuse td_token from last transfer */ 2226 2227 td->td_token &= htole32(~UHCI_TD_MAXLEN_MASK); 2228 td->td_token |= htole32(UHCI_TD_SET_MAXLEN(*plen)); 2229 2230 td->len = *plen; 2231 2232 if (td->len == 0) { 2233 /* 2234 * Do not call "uhci_mem_layout_fixup()" when the 2235 * length is zero! 2236 */ 2237 td->td_buffer = 0; 2238 td->fix_pc = NULL; 2239 2240 } else { 2241 2242 /* fill out buffer pointer and do fixup, if any */ 2243 2244 uhci_mem_layout_fixup(&ml, td); 2245 2246 } 2247 2248 /* update status */ 2249 if (nframes == 0) { 2250 td->td_status = htole32 2251 (UHCI_TD_ZERO_ACTLEN 2252 (UHCI_TD_SET_ERRCNT(0) | 2253 UHCI_TD_ACTIVE | 2254 UHCI_TD_IOS | 2255 UHCI_TD_IOC)); 2256 } else { 2257 td->td_status = htole32 2258 (UHCI_TD_ZERO_ACTLEN 2259 (UHCI_TD_SET_ERRCNT(0) | 2260 UHCI_TD_ACTIVE | 2261 UHCI_TD_IOS)); 2262 } 2263 2264 usb_pc_cpu_flush(td->page_cache); 2265 2266#ifdef USB_DEBUG 2267 if (uhcidebug > 5) { 2268 DPRINTF("TD %d\n", nframes); 2269 uhci_dump_td(td); 2270 } 2271#endif 2272 /* insert TD into schedule */ 2273 UHCI_APPEND_TD(td, *pp_last); 2274 pp_last++; 2275 2276 plen++; 2277 td_last = td; 2278 td = td->obj_next; 2279 } 2280 2281 xfer->td_transfer_last = td_last; 2282 2283 /* update isoc_next */ 2284 xfer->endpoint->isoc_next = (pp_last - &sc->sc_isoc_p_last[0]) & 2285 (UHCI_VFRAMELIST_COUNT - 1); 2286} 2287 2288static void 2289uhci_device_isoc_start(struct usb_xfer *xfer) 2290{ 2291 /* put transfer on interrupt queue */ 2292 uhci_transfer_intr_enqueue(xfer); 2293} 2294 2295struct usb_pipe_methods uhci_device_isoc_methods = 2296{ 2297 .open = uhci_device_isoc_open, 2298 .close = uhci_device_isoc_close, 2299 .enter = uhci_device_isoc_enter, 2300 .start = uhci_device_isoc_start, 2301}; 2302 2303/*------------------------------------------------------------------------* 2304 * uhci root control support 2305 *------------------------------------------------------------------------* 2306 * Simulate a hardware hub by handling all the necessary requests. 2307 *------------------------------------------------------------------------*/ 2308 2309static const 2310struct usb_device_descriptor uhci_devd = 2311{ 2312 sizeof(struct usb_device_descriptor), 2313 UDESC_DEVICE, /* type */ 2314 {0x00, 0x01}, /* USB version */ 2315 UDCLASS_HUB, /* class */ 2316 UDSUBCLASS_HUB, /* subclass */ 2317 UDPROTO_FSHUB, /* protocol */ 2318 64, /* max packet */ 2319 {0}, {0}, {0x00, 0x01}, /* device id */ 2320 1, 2, 0, /* string indicies */ 2321 1 /* # of configurations */ 2322}; 2323 2324static const struct uhci_config_desc uhci_confd = { 2325 .confd = { 2326 .bLength = sizeof(struct usb_config_descriptor), 2327 .bDescriptorType = UDESC_CONFIG, 2328 .wTotalLength[0] = sizeof(uhci_confd), 2329 .bNumInterface = 1, 2330 .bConfigurationValue = 1, 2331 .iConfiguration = 0, 2332 .bmAttributes = UC_SELF_POWERED, 2333 .bMaxPower = 0 /* max power */ 2334 }, 2335 .ifcd = { 2336 .bLength = sizeof(struct usb_interface_descriptor), 2337 .bDescriptorType = UDESC_INTERFACE, 2338 .bNumEndpoints = 1, 2339 .bInterfaceClass = UICLASS_HUB, 2340 .bInterfaceSubClass = UISUBCLASS_HUB, 2341 .bInterfaceProtocol = UIPROTO_FSHUB, 2342 }, 2343 .endpd = { 2344 .bLength = sizeof(struct usb_endpoint_descriptor), 2345 .bDescriptorType = UDESC_ENDPOINT, 2346 .bEndpointAddress = UE_DIR_IN | UHCI_INTR_ENDPT, 2347 .bmAttributes = UE_INTERRUPT, 2348 .wMaxPacketSize[0] = 8, /* max packet (63 ports) */ 2349 .bInterval = 255, 2350 }, 2351}; 2352 2353static const 2354struct usb_hub_descriptor_min uhci_hubd_piix = 2355{ 2356 .bDescLength = sizeof(uhci_hubd_piix), 2357 .bDescriptorType = UDESC_HUB, 2358 .bNbrPorts = 2, 2359 .wHubCharacteristics = {UHD_PWR_NO_SWITCH | UHD_OC_INDIVIDUAL, 0}, 2360 .bPwrOn2PwrGood = 50, 2361}; 2362 2363/* 2364 * The USB hub protocol requires that SET_FEATURE(PORT_RESET) also 2365 * enables the port, and also states that SET_FEATURE(PORT_ENABLE) 2366 * should not be used by the USB subsystem. As we cannot issue a 2367 * SET_FEATURE(PORT_ENABLE) externally, we must ensure that the port 2368 * will be enabled as part of the reset. 2369 * 2370 * On the VT83C572, the port cannot be successfully enabled until the 2371 * outstanding "port enable change" and "connection status change" 2372 * events have been reset. 2373 */ 2374static usb_error_t 2375uhci_portreset(uhci_softc_t *sc, uint16_t index) 2376{ 2377 uint16_t port; 2378 uint16_t x; 2379 uint8_t lim; 2380 2381 if (index == 1) 2382 port = UHCI_PORTSC1; 2383 else if (index == 2) 2384 port = UHCI_PORTSC2; 2385 else 2386 return (USB_ERR_IOERROR); 2387 2388 /* 2389 * Before we do anything, turn on SOF messages on the USB 2390 * BUS. Some USB devices do not cope without them! 2391 */ 2392 uhci_restart(sc); 2393 2394 x = URWMASK(UREAD2(sc, port)); 2395 UWRITE2(sc, port, x | UHCI_PORTSC_PR); 2396 2397 usb_pause_mtx(&sc->sc_bus.bus_mtx, 2398 USB_MS_TO_TICKS(usb_port_root_reset_delay)); 2399 2400 DPRINTFN(4, "uhci port %d reset, status0 = 0x%04x\n", 2401 index, UREAD2(sc, port)); 2402 2403 x = URWMASK(UREAD2(sc, port)); 2404 UWRITE2(sc, port, x & ~UHCI_PORTSC_PR); 2405 2406 2407 mtx_unlock(&sc->sc_bus.bus_mtx); 2408 2409 /* 2410 * This delay needs to be exactly 100us, else some USB devices 2411 * fail to attach! 2412 */ 2413 DELAY(100); 2414 2415 mtx_lock(&sc->sc_bus.bus_mtx); 2416 2417 DPRINTFN(4, "uhci port %d reset, status1 = 0x%04x\n", 2418 index, UREAD2(sc, port)); 2419 2420 x = URWMASK(UREAD2(sc, port)); 2421 UWRITE2(sc, port, x | UHCI_PORTSC_PE); 2422 2423 for (lim = 0; lim < 12; lim++) { 2424 2425 usb_pause_mtx(&sc->sc_bus.bus_mtx, 2426 USB_MS_TO_TICKS(usb_port_reset_delay)); 2427 2428 x = UREAD2(sc, port); 2429 2430 DPRINTFN(4, "uhci port %d iteration %u, status = 0x%04x\n", 2431 index, lim, x); 2432 2433 if (!(x & UHCI_PORTSC_CCS)) { 2434 /* 2435 * No device is connected (or was disconnected 2436 * during reset). Consider the port reset. 2437 * The delay must be long enough to ensure on 2438 * the initial iteration that the device 2439 * connection will have been registered. 50ms 2440 * appears to be sufficient, but 20ms is not. 2441 */ 2442 DPRINTFN(4, "uhci port %d loop %u, device detached\n", 2443 index, lim); 2444 goto done; 2445 } 2446 if (x & (UHCI_PORTSC_POEDC | UHCI_PORTSC_CSC)) { 2447 /* 2448 * Port enabled changed and/or connection 2449 * status changed were set. Reset either or 2450 * both raised flags (by writing a 1 to that 2451 * bit), and wait again for state to settle. 2452 */ 2453 UWRITE2(sc, port, URWMASK(x) | 2454 (x & (UHCI_PORTSC_POEDC | UHCI_PORTSC_CSC))); 2455 continue; 2456 } 2457 if (x & UHCI_PORTSC_PE) { 2458 /* port is enabled */ 2459 goto done; 2460 } 2461 UWRITE2(sc, port, URWMASK(x) | UHCI_PORTSC_PE); 2462 } 2463 2464 DPRINTFN(2, "uhci port %d reset timed out\n", index); 2465 return (USB_ERR_TIMEOUT); 2466 2467done: 2468 DPRINTFN(4, "uhci port %d reset, status2 = 0x%04x\n", 2469 index, UREAD2(sc, port)); 2470 2471 sc->sc_isreset = 1; 2472 return (USB_ERR_NORMAL_COMPLETION); 2473} 2474 2475static usb_error_t 2476uhci_roothub_exec(struct usb_device *udev, 2477 struct usb_device_request *req, const void **pptr, uint16_t *plength) 2478{ 2479 uhci_softc_t *sc = UHCI_BUS2SC(udev->bus); 2480 const void *ptr; 2481 const char *str_ptr; 2482 uint16_t x; 2483 uint16_t port; 2484 uint16_t value; 2485 uint16_t index; 2486 uint16_t status; 2487 uint16_t change; 2488 uint16_t len; 2489 usb_error_t err; 2490 2491 USB_BUS_LOCK_ASSERT(&sc->sc_bus, MA_OWNED); 2492 2493 /* buffer reset */ 2494 ptr = (const void *)&sc->sc_hub_desc.temp; 2495 len = 0; 2496 err = 0; 2497 2498 value = UGETW(req->wValue); 2499 index = UGETW(req->wIndex); 2500 2501 DPRINTFN(3, "type=0x%02x request=0x%02x wLen=0x%04x " 2502 "wValue=0x%04x wIndex=0x%04x\n", 2503 req->bmRequestType, req->bRequest, 2504 UGETW(req->wLength), value, index); 2505 2506#define C(x,y) ((x) | ((y) << 8)) 2507 switch (C(req->bRequest, req->bmRequestType)) { 2508 case C(UR_CLEAR_FEATURE, UT_WRITE_DEVICE): 2509 case C(UR_CLEAR_FEATURE, UT_WRITE_INTERFACE): 2510 case C(UR_CLEAR_FEATURE, UT_WRITE_ENDPOINT): 2511 /* 2512 * DEVICE_REMOTE_WAKEUP and ENDPOINT_HALT are no-ops 2513 * for the integrated root hub. 2514 */ 2515 break; 2516 case C(UR_GET_CONFIG, UT_READ_DEVICE): 2517 len = 1; 2518 sc->sc_hub_desc.temp[0] = sc->sc_conf; 2519 break; 2520 case C(UR_GET_DESCRIPTOR, UT_READ_DEVICE): 2521 switch (value >> 8) { 2522 case UDESC_DEVICE: 2523 if ((value & 0xff) != 0) { 2524 err = USB_ERR_IOERROR; 2525 goto done; 2526 } 2527 len = sizeof(uhci_devd); 2528 ptr = (const void *)&uhci_devd; 2529 break; 2530 2531 case UDESC_CONFIG: 2532 if ((value & 0xff) != 0) { 2533 err = USB_ERR_IOERROR; 2534 goto done; 2535 } 2536 len = sizeof(uhci_confd); 2537 ptr = (const void *)&uhci_confd; 2538 break; 2539 2540 case UDESC_STRING: 2541 switch (value & 0xff) { 2542 case 0: /* Language table */ 2543 str_ptr = "\001"; 2544 break; 2545 2546 case 1: /* Vendor */ 2547 str_ptr = sc->sc_vendor; 2548 break; 2549 2550 case 2: /* Product */ 2551 str_ptr = "UHCI root HUB"; 2552 break; 2553 2554 default: 2555 str_ptr = ""; 2556 break; 2557 } 2558 2559 len = usb_make_str_desc 2560 (sc->sc_hub_desc.temp, 2561 sizeof(sc->sc_hub_desc.temp), 2562 str_ptr); 2563 break; 2564 2565 default: 2566 err = USB_ERR_IOERROR; 2567 goto done; 2568 } 2569 break; 2570 case C(UR_GET_INTERFACE, UT_READ_INTERFACE): 2571 len = 1; 2572 sc->sc_hub_desc.temp[0] = 0; 2573 break; 2574 case C(UR_GET_STATUS, UT_READ_DEVICE): 2575 len = 2; 2576 USETW(sc->sc_hub_desc.stat.wStatus, UDS_SELF_POWERED); 2577 break; 2578 case C(UR_GET_STATUS, UT_READ_INTERFACE): 2579 case C(UR_GET_STATUS, UT_READ_ENDPOINT): 2580 len = 2; 2581 USETW(sc->sc_hub_desc.stat.wStatus, 0); 2582 break; 2583 case C(UR_SET_ADDRESS, UT_WRITE_DEVICE): 2584 if (value >= UHCI_MAX_DEVICES) { 2585 err = USB_ERR_IOERROR; 2586 goto done; 2587 } 2588 sc->sc_addr = value; 2589 break; 2590 case C(UR_SET_CONFIG, UT_WRITE_DEVICE): 2591 if ((value != 0) && (value != 1)) { 2592 err = USB_ERR_IOERROR; 2593 goto done; 2594 } 2595 sc->sc_conf = value; 2596 break; 2597 case C(UR_SET_DESCRIPTOR, UT_WRITE_DEVICE): 2598 break; 2599 case C(UR_SET_FEATURE, UT_WRITE_DEVICE): 2600 case C(UR_SET_FEATURE, UT_WRITE_INTERFACE): 2601 case C(UR_SET_FEATURE, UT_WRITE_ENDPOINT): 2602 err = USB_ERR_IOERROR; 2603 goto done; 2604 case C(UR_SET_INTERFACE, UT_WRITE_INTERFACE): 2605 break; 2606 case C(UR_SYNCH_FRAME, UT_WRITE_ENDPOINT): 2607 break; 2608 /* Hub requests */ 2609 case C(UR_CLEAR_FEATURE, UT_WRITE_CLASS_DEVICE): 2610 break; 2611 case C(UR_CLEAR_FEATURE, UT_WRITE_CLASS_OTHER): 2612 DPRINTFN(4, "UR_CLEAR_PORT_FEATURE " 2613 "port=%d feature=%d\n", 2614 index, value); 2615 if (index == 1) 2616 port = UHCI_PORTSC1; 2617 else if (index == 2) 2618 port = UHCI_PORTSC2; 2619 else { 2620 err = USB_ERR_IOERROR; 2621 goto done; 2622 } 2623 switch (value) { 2624 case UHF_PORT_ENABLE: 2625 x = URWMASK(UREAD2(sc, port)); 2626 UWRITE2(sc, port, x & ~UHCI_PORTSC_PE); 2627 break; 2628 case UHF_PORT_SUSPEND: 2629 x = URWMASK(UREAD2(sc, port)); 2630 UWRITE2(sc, port, x & ~(UHCI_PORTSC_SUSP)); 2631 break; 2632 case UHF_PORT_RESET: 2633 x = URWMASK(UREAD2(sc, port)); 2634 UWRITE2(sc, port, x & ~UHCI_PORTSC_PR); 2635 break; 2636 case UHF_C_PORT_CONNECTION: 2637 x = URWMASK(UREAD2(sc, port)); 2638 UWRITE2(sc, port, x | UHCI_PORTSC_CSC); 2639 break; 2640 case UHF_C_PORT_ENABLE: 2641 x = URWMASK(UREAD2(sc, port)); 2642 UWRITE2(sc, port, x | UHCI_PORTSC_POEDC); 2643 break; 2644 case UHF_C_PORT_OVER_CURRENT: 2645 x = URWMASK(UREAD2(sc, port)); 2646 UWRITE2(sc, port, x | UHCI_PORTSC_OCIC); 2647 break; 2648 case UHF_C_PORT_RESET: 2649 sc->sc_isreset = 0; 2650 err = USB_ERR_NORMAL_COMPLETION; 2651 goto done; 2652 case UHF_C_PORT_SUSPEND: 2653 sc->sc_isresumed &= ~(1 << index); 2654 break; 2655 case UHF_PORT_CONNECTION: 2656 case UHF_PORT_OVER_CURRENT: 2657 case UHF_PORT_POWER: 2658 case UHF_PORT_LOW_SPEED: 2659 default: 2660 err = USB_ERR_IOERROR; 2661 goto done; 2662 } 2663 break; 2664 case C(UR_GET_BUS_STATE, UT_READ_CLASS_OTHER): 2665 if (index == 1) 2666 port = UHCI_PORTSC1; 2667 else if (index == 2) 2668 port = UHCI_PORTSC2; 2669 else { 2670 err = USB_ERR_IOERROR; 2671 goto done; 2672 } 2673 len = 1; 2674 sc->sc_hub_desc.temp[0] = 2675 ((UREAD2(sc, port) & UHCI_PORTSC_LS) >> 2676 UHCI_PORTSC_LS_SHIFT); 2677 break; 2678 case C(UR_GET_DESCRIPTOR, UT_READ_CLASS_DEVICE): 2679 if ((value & 0xff) != 0) { 2680 err = USB_ERR_IOERROR; 2681 goto done; 2682 } 2683 len = sizeof(uhci_hubd_piix); 2684 ptr = (const void *)&uhci_hubd_piix; 2685 break; 2686 case C(UR_GET_STATUS, UT_READ_CLASS_DEVICE): 2687 len = 16; 2688 memset(sc->sc_hub_desc.temp, 0, 16); 2689 break; 2690 case C(UR_GET_STATUS, UT_READ_CLASS_OTHER): 2691 if (index == 1) 2692 port = UHCI_PORTSC1; 2693 else if (index == 2) 2694 port = UHCI_PORTSC2; 2695 else { 2696 err = USB_ERR_IOERROR; 2697 goto done; 2698 } 2699 x = UREAD2(sc, port); 2700 status = change = 0; 2701 if (x & UHCI_PORTSC_CCS) 2702 status |= UPS_CURRENT_CONNECT_STATUS; 2703 if (x & UHCI_PORTSC_CSC) 2704 change |= UPS_C_CONNECT_STATUS; 2705 if (x & UHCI_PORTSC_PE) 2706 status |= UPS_PORT_ENABLED; 2707 if (x & UHCI_PORTSC_POEDC) 2708 change |= UPS_C_PORT_ENABLED; 2709 if (x & UHCI_PORTSC_OCI) 2710 status |= UPS_OVERCURRENT_INDICATOR; 2711 if (x & UHCI_PORTSC_OCIC) 2712 change |= UPS_C_OVERCURRENT_INDICATOR; 2713 if (x & UHCI_PORTSC_LSDA) 2714 status |= UPS_LOW_SPEED; 2715 if ((x & UHCI_PORTSC_PE) && (x & UHCI_PORTSC_RD)) { 2716 /* need to do a write back */ 2717 UWRITE2(sc, port, URWMASK(x)); 2718 2719 /* wait 20ms for resume sequence to complete */ 2720 usb_pause_mtx(&sc->sc_bus.bus_mtx, hz / 50); 2721 2722 /* clear suspend and resume detect */ 2723 UWRITE2(sc, port, URWMASK(x) & ~(UHCI_PORTSC_RD | 2724 UHCI_PORTSC_SUSP)); 2725 2726 /* wait a little bit */ 2727 usb_pause_mtx(&sc->sc_bus.bus_mtx, hz / 500); 2728 2729 sc->sc_isresumed |= (1 << index); 2730 2731 } else if (x & UHCI_PORTSC_SUSP) { 2732 status |= UPS_SUSPEND; 2733 } 2734 status |= UPS_PORT_POWER; 2735 if (sc->sc_isresumed & (1 << index)) 2736 change |= UPS_C_SUSPEND; 2737 if (sc->sc_isreset) 2738 change |= UPS_C_PORT_RESET; 2739 USETW(sc->sc_hub_desc.ps.wPortStatus, status); 2740 USETW(sc->sc_hub_desc.ps.wPortChange, change); 2741 len = sizeof(sc->sc_hub_desc.ps); 2742 break; 2743 case C(UR_SET_DESCRIPTOR, UT_WRITE_CLASS_DEVICE): 2744 err = USB_ERR_IOERROR; 2745 goto done; 2746 case C(UR_SET_FEATURE, UT_WRITE_CLASS_DEVICE): 2747 break; 2748 case C(UR_SET_FEATURE, UT_WRITE_CLASS_OTHER): 2749 if (index == 1) 2750 port = UHCI_PORTSC1; 2751 else if (index == 2) 2752 port = UHCI_PORTSC2; 2753 else { 2754 err = USB_ERR_IOERROR; 2755 goto done; 2756 } 2757 switch (value) { 2758 case UHF_PORT_ENABLE: 2759 x = URWMASK(UREAD2(sc, port)); 2760 UWRITE2(sc, port, x | UHCI_PORTSC_PE); 2761 break; 2762 case UHF_PORT_SUSPEND: 2763 x = URWMASK(UREAD2(sc, port)); 2764 UWRITE2(sc, port, x | UHCI_PORTSC_SUSP); 2765 break; 2766 case UHF_PORT_RESET: 2767 err = uhci_portreset(sc, index); 2768 goto done; 2769 case UHF_PORT_POWER: 2770 /* pretend we turned on power */ 2771 err = USB_ERR_NORMAL_COMPLETION; 2772 goto done; 2773 case UHF_C_PORT_CONNECTION: 2774 case UHF_C_PORT_ENABLE: 2775 case UHF_C_PORT_OVER_CURRENT: 2776 case UHF_PORT_CONNECTION: 2777 case UHF_PORT_OVER_CURRENT: 2778 case UHF_PORT_LOW_SPEED: 2779 case UHF_C_PORT_SUSPEND: 2780 case UHF_C_PORT_RESET: 2781 default: 2782 err = USB_ERR_IOERROR; 2783 goto done; 2784 } 2785 break; 2786 default: 2787 err = USB_ERR_IOERROR; 2788 goto done; 2789 } 2790done: 2791 *plength = len; 2792 *pptr = ptr; 2793 return (err); 2794} 2795 2796/* 2797 * This routine is executed periodically and simulates interrupts from 2798 * the root controller interrupt pipe for port status change: 2799 */ 2800static void 2801uhci_root_intr(uhci_softc_t *sc) 2802{ 2803 DPRINTFN(21, "\n"); 2804 2805 USB_BUS_LOCK_ASSERT(&sc->sc_bus, MA_OWNED); 2806 2807 sc->sc_hub_idata[0] = 0; 2808 2809 if (UREAD2(sc, UHCI_PORTSC1) & (UHCI_PORTSC_CSC | 2810 UHCI_PORTSC_OCIC | UHCI_PORTSC_RD)) { 2811 sc->sc_hub_idata[0] |= 1 << 1; 2812 } 2813 if (UREAD2(sc, UHCI_PORTSC2) & (UHCI_PORTSC_CSC | 2814 UHCI_PORTSC_OCIC | UHCI_PORTSC_RD)) { 2815 sc->sc_hub_idata[0] |= 1 << 2; 2816 } 2817 2818 /* restart timer */ 2819 usb_callout_reset(&sc->sc_root_intr, hz, 2820 (void *)&uhci_root_intr, sc); 2821 2822 if (sc->sc_hub_idata[0] != 0) { 2823 uhub_root_intr(&sc->sc_bus, sc->sc_hub_idata, 2824 sizeof(sc->sc_hub_idata)); 2825 } 2826} 2827 2828static void 2829uhci_xfer_setup(struct usb_setup_params *parm) 2830{ 2831 struct usb_page_search page_info; 2832 struct usb_page_cache *pc; 2833 uhci_softc_t *sc; 2834 struct usb_xfer *xfer; 2835 void *last_obj; 2836 uint32_t ntd; 2837 uint32_t nqh; 2838 uint32_t nfixup; 2839 uint32_t n; 2840 uint16_t align; 2841 2842 sc = UHCI_BUS2SC(parm->udev->bus); 2843 xfer = parm->curr_xfer; 2844 2845 parm->hc_max_packet_size = 0x500; 2846 parm->hc_max_packet_count = 1; 2847 parm->hc_max_frame_size = 0x500; 2848 2849 /* 2850 * compute ntd and nqh 2851 */ 2852 if (parm->methods == &uhci_device_ctrl_methods) { 2853 xfer->flags_int.bdma_enable = 1; 2854 xfer->flags_int.bdma_no_post_sync = 1; 2855 2856 usbd_transfer_setup_sub(parm); 2857 2858 /* see EHCI HC driver for proof of "ntd" formula */ 2859 2860 nqh = 1; 2861 ntd = ((2 * xfer->nframes) + 1 /* STATUS */ 2862 + (xfer->max_data_length / xfer->max_frame_size)); 2863 2864 } else if (parm->methods == &uhci_device_bulk_methods) { 2865 xfer->flags_int.bdma_enable = 1; 2866 xfer->flags_int.bdma_no_post_sync = 1; 2867 2868 usbd_transfer_setup_sub(parm); 2869 2870 nqh = 1; 2871 ntd = ((2 * xfer->nframes) 2872 + (xfer->max_data_length / xfer->max_frame_size)); 2873 2874 } else if (parm->methods == &uhci_device_intr_methods) { 2875 xfer->flags_int.bdma_enable = 1; 2876 xfer->flags_int.bdma_no_post_sync = 1; 2877 2878 usbd_transfer_setup_sub(parm); 2879 2880 nqh = 1; 2881 ntd = ((2 * xfer->nframes) 2882 + (xfer->max_data_length / xfer->max_frame_size)); 2883 2884 } else if (parm->methods == &uhci_device_isoc_methods) { 2885 xfer->flags_int.bdma_enable = 1; 2886 xfer->flags_int.bdma_no_post_sync = 1; 2887 2888 usbd_transfer_setup_sub(parm); 2889 2890 nqh = 0; 2891 ntd = xfer->nframes; 2892 2893 } else { 2894 2895 usbd_transfer_setup_sub(parm); 2896 2897 nqh = 0; 2898 ntd = 0; 2899 } 2900 2901 if (parm->err) { 2902 return; 2903 } 2904 /* 2905 * NOTE: the UHCI controller requires that 2906 * every packet must be contiguous on 2907 * the same USB memory page ! 2908 */ 2909 nfixup = (parm->bufsize / USB_PAGE_SIZE) + 1; 2910 2911 /* 2912 * Compute a suitable power of two alignment 2913 * for our "max_frame_size" fixup buffer(s): 2914 */ 2915 align = xfer->max_frame_size; 2916 n = 0; 2917 while (align) { 2918 align >>= 1; 2919 n++; 2920 } 2921 2922 /* check for power of two */ 2923 if (!(xfer->max_frame_size & 2924 (xfer->max_frame_size - 1))) { 2925 n--; 2926 } 2927 /* 2928 * We don't allow alignments of 2929 * less than 8 bytes: 2930 * 2931 * NOTE: Allocating using an aligment 2932 * of 1 byte has special meaning! 2933 */ 2934 if (n < 3) { 2935 n = 3; 2936 } 2937 align = (1 << n); 2938 2939 if (usbd_transfer_setup_sub_malloc( 2940 parm, &pc, xfer->max_frame_size, 2941 align, nfixup)) { 2942 parm->err = USB_ERR_NOMEM; 2943 return; 2944 } 2945 xfer->buf_fixup = pc; 2946 2947alloc_dma_set: 2948 2949 if (parm->err) { 2950 return; 2951 } 2952 last_obj = NULL; 2953 2954 if (usbd_transfer_setup_sub_malloc( 2955 parm, &pc, sizeof(uhci_td_t), 2956 UHCI_TD_ALIGN, ntd)) { 2957 parm->err = USB_ERR_NOMEM; 2958 return; 2959 } 2960 if (parm->buf) { 2961 for (n = 0; n != ntd; n++) { 2962 uhci_td_t *td; 2963 2964 usbd_get_page(pc + n, 0, &page_info); 2965 2966 td = page_info.buffer; 2967 2968 /* init TD */ 2969 if ((parm->methods == &uhci_device_bulk_methods) || 2970 (parm->methods == &uhci_device_ctrl_methods) || 2971 (parm->methods == &uhci_device_intr_methods)) { 2972 /* set depth first bit */ 2973 td->td_self = htole32(page_info.physaddr | 2974 UHCI_PTR_TD | UHCI_PTR_VF); 2975 } else { 2976 td->td_self = htole32(page_info.physaddr | 2977 UHCI_PTR_TD); 2978 } 2979 2980 td->obj_next = last_obj; 2981 td->page_cache = pc + n; 2982 2983 last_obj = td; 2984 2985 usb_pc_cpu_flush(pc + n); 2986 } 2987 } 2988 xfer->td_start[xfer->flags_int.curr_dma_set] = last_obj; 2989 2990 last_obj = NULL; 2991 2992 if (usbd_transfer_setup_sub_malloc( 2993 parm, &pc, sizeof(uhci_qh_t), 2994 UHCI_QH_ALIGN, nqh)) { 2995 parm->err = USB_ERR_NOMEM; 2996 return; 2997 } 2998 if (parm->buf) { 2999 for (n = 0; n != nqh; n++) { 3000 uhci_qh_t *qh; 3001 3002 usbd_get_page(pc + n, 0, &page_info); 3003 3004 qh = page_info.buffer; 3005 3006 /* init QH */ 3007 qh->qh_self = htole32(page_info.physaddr | UHCI_PTR_QH); 3008 qh->obj_next = last_obj; 3009 qh->page_cache = pc + n; 3010 3011 last_obj = qh; 3012 3013 usb_pc_cpu_flush(pc + n); 3014 } 3015 } 3016 xfer->qh_start[xfer->flags_int.curr_dma_set] = last_obj; 3017 3018 if (!xfer->flags_int.curr_dma_set) { 3019 xfer->flags_int.curr_dma_set = 1; 3020 goto alloc_dma_set; 3021 } 3022} 3023 3024static void 3025uhci_ep_init(struct usb_device *udev, struct usb_endpoint_descriptor *edesc, 3026 struct usb_endpoint *ep) 3027{ 3028 uhci_softc_t *sc = UHCI_BUS2SC(udev->bus); 3029 3030 DPRINTFN(2, "endpoint=%p, addr=%d, endpt=%d, mode=%d (%d)\n", 3031 ep, udev->address, 3032 edesc->bEndpointAddress, udev->flags.usb_mode, 3033 sc->sc_addr); 3034 3035 if (udev->device_index != sc->sc_addr) { 3036 switch (edesc->bmAttributes & UE_XFERTYPE) { 3037 case UE_CONTROL: 3038 ep->methods = &uhci_device_ctrl_methods; 3039 break; 3040 case UE_INTERRUPT: 3041 ep->methods = &uhci_device_intr_methods; 3042 break; 3043 case UE_ISOCHRONOUS: 3044 if (udev->speed == USB_SPEED_FULL) { 3045 ep->methods = &uhci_device_isoc_methods; 3046 } 3047 break; 3048 case UE_BULK: 3049 ep->methods = &uhci_device_bulk_methods; 3050 break; 3051 default: 3052 /* do nothing */ 3053 break; 3054 } 3055 } 3056} 3057 3058static void 3059uhci_xfer_unsetup(struct usb_xfer *xfer) 3060{ 3061 return; 3062} 3063 3064static void 3065uhci_get_dma_delay(struct usb_device *udev, uint32_t *pus) 3066{ 3067 /* 3068 * Wait until hardware has finished any possible use of the 3069 * transfer descriptor(s) and QH 3070 */ 3071 *pus = (1125); /* microseconds */ 3072} 3073 3074static void 3075uhci_device_resume(struct usb_device *udev) 3076{ 3077 struct uhci_softc *sc = UHCI_BUS2SC(udev->bus); 3078 struct usb_xfer *xfer; 3079 struct usb_pipe_methods *methods; 3080 uhci_qh_t *qh; 3081 3082 DPRINTF("\n"); 3083 3084 USB_BUS_LOCK(udev->bus); 3085 3086 TAILQ_FOREACH(xfer, &sc->sc_bus.intr_q.head, wait_entry) { 3087 3088 if (xfer->xroot->udev == udev) { 3089 3090 methods = xfer->endpoint->methods; 3091 qh = xfer->qh_start[xfer->flags_int.curr_dma_set]; 3092 3093 if (methods == &uhci_device_bulk_methods) { 3094 UHCI_APPEND_QH(qh, sc->sc_bulk_p_last); 3095 uhci_add_loop(sc); 3096 xfer->flags_int.bandwidth_reclaimed = 1; 3097 } 3098 if (methods == &uhci_device_ctrl_methods) { 3099 if (xfer->xroot->udev->speed == USB_SPEED_LOW) { 3100 UHCI_APPEND_QH(qh, sc->sc_ls_ctl_p_last); 3101 } else { 3102 UHCI_APPEND_QH(qh, sc->sc_fs_ctl_p_last); 3103 } 3104 } 3105 if (methods == &uhci_device_intr_methods) { 3106 UHCI_APPEND_QH(qh, sc->sc_intr_p_last[xfer->qh_pos]); 3107 } 3108 } 3109 } 3110 3111 USB_BUS_UNLOCK(udev->bus); 3112 3113 return; 3114} 3115 3116static void 3117uhci_device_suspend(struct usb_device *udev) 3118{ 3119 struct uhci_softc *sc = UHCI_BUS2SC(udev->bus); 3120 struct usb_xfer *xfer; 3121 struct usb_pipe_methods *methods; 3122 uhci_qh_t *qh; 3123 3124 DPRINTF("\n"); 3125 3126 USB_BUS_LOCK(udev->bus); 3127 3128 TAILQ_FOREACH(xfer, &sc->sc_bus.intr_q.head, wait_entry) { 3129 3130 if (xfer->xroot->udev == udev) { 3131 3132 methods = xfer->endpoint->methods; 3133 qh = xfer->qh_start[xfer->flags_int.curr_dma_set]; 3134 3135 if (xfer->flags_int.bandwidth_reclaimed) { 3136 xfer->flags_int.bandwidth_reclaimed = 0; 3137 uhci_rem_loop(sc); 3138 } 3139 if (methods == &uhci_device_bulk_methods) { 3140 UHCI_REMOVE_QH(qh, sc->sc_bulk_p_last); 3141 } 3142 if (methods == &uhci_device_ctrl_methods) { 3143 if (xfer->xroot->udev->speed == USB_SPEED_LOW) { 3144 UHCI_REMOVE_QH(qh, sc->sc_ls_ctl_p_last); 3145 } else { 3146 UHCI_REMOVE_QH(qh, sc->sc_fs_ctl_p_last); 3147 } 3148 } 3149 if (methods == &uhci_device_intr_methods) { 3150 UHCI_REMOVE_QH(qh, sc->sc_intr_p_last[xfer->qh_pos]); 3151 } 3152 } 3153 } 3154 3155 USB_BUS_UNLOCK(udev->bus); 3156 3157 return; 3158} 3159 3160static void 3161uhci_set_hw_power_sleep(struct usb_bus *bus, uint32_t state) 3162{ 3163 struct uhci_softc *sc = UHCI_BUS2SC(bus); 3164 3165 switch (state) { 3166 case USB_HW_POWER_SUSPEND: 3167 case USB_HW_POWER_SHUTDOWN: 3168 uhci_suspend(sc); 3169 break; 3170 case USB_HW_POWER_RESUME: 3171 uhci_resume(sc); 3172 break; 3173 default: 3174 break; 3175 } 3176} 3177 3178static void 3179uhci_set_hw_power(struct usb_bus *bus) 3180{ 3181 struct uhci_softc *sc = UHCI_BUS2SC(bus); 3182 uint32_t flags; 3183 3184 DPRINTF("\n"); 3185 3186 USB_BUS_LOCK(bus); 3187 3188 flags = bus->hw_power_state; 3189 3190 /* 3191 * WARNING: Some FULL speed USB devices require periodic SOF 3192 * messages! If any USB devices are connected through the 3193 * UHCI, power save will be disabled! 3194 */ 3195 if (flags & (USB_HW_POWER_CONTROL | 3196 USB_HW_POWER_NON_ROOT_HUB | 3197 USB_HW_POWER_BULK | 3198 USB_HW_POWER_INTERRUPT | 3199 USB_HW_POWER_ISOC)) { 3200 DPRINTF("Some USB transfer is " 3201 "active on unit %u.\n", 3202 device_get_unit(sc->sc_bus.bdev)); 3203 uhci_restart(sc); 3204 } else { 3205 DPRINTF("Power save on unit %u.\n", 3206 device_get_unit(sc->sc_bus.bdev)); 3207 UHCICMD(sc, UHCI_CMD_MAXP); 3208 } 3209 3210 USB_BUS_UNLOCK(bus); 3211 3212 return; 3213} 3214 3215 3216struct usb_bus_methods uhci_bus_methods = 3217{ 3218 .endpoint_init = uhci_ep_init, 3219 .xfer_setup = uhci_xfer_setup, 3220 .xfer_unsetup = uhci_xfer_unsetup, 3221 .get_dma_delay = uhci_get_dma_delay, 3222 .device_resume = uhci_device_resume, 3223 .device_suspend = uhci_device_suspend, 3224 .set_hw_power = uhci_set_hw_power, 3225 .set_hw_power_sleep = uhci_set_hw_power_sleep, 3226 .roothub_exec = uhci_roothub_exec, 3227 .xfer_poll = uhci_do_poll, 3228}; 3229