options revision 270892
1# $FreeBSD: stable/10/sys/conf/options 270892 2014-08-31 21:18:23Z trasz $ 2# 3# On the handling of kernel options 4# 5# All kernel options should be listed in NOTES, with suitable 6# descriptions. Negative options (options that make some code not 7# compile) should be commented out; LINT (generated from NOTES) should 8# compile as much code as possible. Try to structure option-using 9# code so that a single option only switch code on, or only switch 10# code off, to make it possible to have a full compile-test. If 11# necessary, you can check for COMPILING_LINT to get maximum code 12# coverage. 13# 14# All new options shall also be listed in either "conf/options" or 15# "conf/options.<machine>". Options that affect a single source-file 16# <xxx>.[c|s] should be directed into "opt_<xxx>.h", while options 17# that affect multiple files should either go in "opt_global.h" if 18# this is a kernel-wide option (used just about everywhere), or in 19# "opt_<option-name-in-lower-case>.h" if it affects only some files. 20# Note that the effect of listing only an option without a 21# header-file-name in conf/options (and cousins) is that the last 22# convention is followed. 23# 24# This handling scheme is not yet fully implemented. 25# 26# 27# Format of this file: 28# Option name filename 29# 30# If filename is missing, the default is 31# opt_<name-of-option-in-lower-case>.h 32 33AAC_DEBUG opt_aac.h 34AACRAID_DEBUG opt_aacraid.h 35AHC_ALLOW_MEMIO opt_aic7xxx.h 36AHC_TMODE_ENABLE opt_aic7xxx.h 37AHC_DUMP_EEPROM opt_aic7xxx.h 38AHC_DEBUG opt_aic7xxx.h 39AHC_DEBUG_OPTS opt_aic7xxx.h 40AHC_REG_PRETTY_PRINT opt_aic7xxx.h 41AHD_DEBUG opt_aic79xx.h 42AHD_DEBUG_OPTS opt_aic79xx.h 43AHD_TMODE_ENABLE opt_aic79xx.h 44AHD_REG_PRETTY_PRINT opt_aic79xx.h 45ADW_ALLOW_MEMIO opt_adw.h 46 47TWA_DEBUG opt_twa.h 48TWA_FLASH_FIRMWARE opt_twa.h 49 50# Debugging options. 51ALT_BREAK_TO_DEBUGGER opt_kdb.h 52BREAK_TO_DEBUGGER opt_kdb.h 53DDB 54DDB_BUFR_SIZE opt_ddb.h 55DDB_CAPTURE_DEFAULTBUFSIZE opt_ddb.h 56DDB_CAPTURE_MAXBUFSIZE opt_ddb.h 57DDB_CTF opt_ddb.h 58DDB_NUMSYM opt_ddb.h 59GDB 60KDB opt_global.h 61KDB_TRACE opt_kdb.h 62KDB_UNATTENDED opt_kdb.h 63KLD_DEBUG opt_kld.h 64SYSCTL_DEBUG opt_sysctl.h 65EARLY_PRINTF opt_global.h 66TEXTDUMP_PREFERRED opt_ddb.h 67TEXTDUMP_VERBOSE opt_ddb.h 68 69# Miscellaneous options. 70ADAPTIVE_LOCKMGRS 71ALQ 72ALTERA_SDCARD_FAST_SIM opt_altera_sdcard.h 73ATSE_CFI_HACK opt_cfi.h 74AUDIT opt_global.h 75BOOTHOWTO opt_global.h 76BOOTVERBOSE opt_global.h 77CALLOUT_PROFILING 78CAPABILITIES opt_capsicum.h 79CAPABILITY_MODE opt_capsicum.h 80COMPAT_43 opt_compat.h 81COMPAT_43TTY opt_compat.h 82COMPAT_FREEBSD4 opt_compat.h 83COMPAT_FREEBSD5 opt_compat.h 84COMPAT_FREEBSD6 opt_compat.h 85COMPAT_FREEBSD7 opt_compat.h 86COMPILING_LINT opt_global.h 87COMPRESS_USER_CORES opt_core.h 88CY_PCI_FASTINTR 89DEADLKRES opt_watchdog.h 90DIRECTIO 91FILEMON opt_dontuse.h 92FFCLOCK 93FULL_PREEMPTION opt_sched.h 94IPI_PREEMPTION opt_sched.h 95GEOM_AES opt_geom.h 96GEOM_BDE opt_geom.h 97GEOM_BSD opt_geom.h 98GEOM_CACHE opt_geom.h 99GEOM_CONCAT opt_geom.h 100GEOM_ELI opt_geom.h 101GEOM_FOX opt_geom.h 102GEOM_GATE opt_geom.h 103GEOM_JOURNAL opt_geom.h 104GEOM_LABEL opt_geom.h 105GEOM_LINUX_LVM opt_geom.h 106GEOM_MBR opt_geom.h 107GEOM_MIRROR opt_geom.h 108GEOM_MULTIPATH opt_geom.h 109GEOM_NOP opt_geom.h 110GEOM_PART_APM opt_geom.h 111GEOM_PART_BSD opt_geom.h 112GEOM_PART_BSD64 opt_geom.h 113GEOM_PART_EBR opt_geom.h 114GEOM_PART_EBR_COMPAT opt_geom.h 115GEOM_PART_GPT opt_geom.h 116GEOM_PART_LDM opt_geom.h 117GEOM_PART_MBR opt_geom.h 118GEOM_PART_PC98 opt_geom.h 119GEOM_PART_VTOC8 opt_geom.h 120GEOM_PC98 opt_geom.h 121GEOM_RAID opt_geom.h 122GEOM_RAID3 opt_geom.h 123GEOM_SHSEC opt_geom.h 124GEOM_STRIPE opt_geom.h 125GEOM_SUNLABEL opt_geom.h 126GEOM_UNCOMPRESS opt_geom.h 127GEOM_UZIP opt_geom.h 128GEOM_VINUM opt_geom.h 129GEOM_VIRSTOR opt_geom.h 130GEOM_VOL opt_geom.h 131GEOM_ZERO opt_geom.h 132KDTRACE_HOOKS opt_kdtrace.h 133KSTACK_MAX_PAGES 134KSTACK_PAGES 135KTRACE 136KTRACE_REQUEST_POOL opt_ktrace.h 137LIBICONV 138MAC opt_global.h 139MAC_BIBA opt_dontuse.h 140MAC_BSDEXTENDED opt_dontuse.h 141MAC_IFOFF opt_dontuse.h 142MAC_LOMAC opt_dontuse.h 143MAC_MLS opt_dontuse.h 144MAC_NONE opt_dontuse.h 145MAC_PARTITION opt_dontuse.h 146MAC_PORTACL opt_dontuse.h 147MAC_SEEOTHERUIDS opt_dontuse.h 148MAC_STATIC opt_mac.h 149MAC_STUB opt_dontuse.h 150MAC_TEST opt_dontuse.h 151MD_ROOT opt_md.h 152MD_ROOT_FSTYPE opt_md.h 153MD_ROOT_SIZE opt_md.h 154MFI_DEBUG opt_mfi.h 155MFI_DECODE_LOG opt_mfi.h 156MPROF_BUFFERS opt_mprof.h 157MPROF_HASH_SIZE opt_mprof.h 158NEW_PCIB opt_global.h 159NO_ADAPTIVE_MUTEXES opt_adaptive_mutexes.h 160NO_ADAPTIVE_RWLOCKS 161NO_ADAPTIVE_SX 162NO_EVENTTIMERS opt_timer.h 163NO_SYSCTL_DESCR opt_global.h 164NSWBUF_MIN opt_swap.h 165MBUF_PACKET_ZONE_DISABLE opt_global.h 166PANIC_REBOOT_WAIT_TIME opt_panic.h 167PPC_DEBUG opt_ppc.h 168PPC_PROBE_CHIPSET opt_ppc.h 169PPS_SYNC opt_ntp.h 170PREEMPTION opt_sched.h 171PROCDESC opt_procdesc.h 172QUOTA 173SCHED_4BSD opt_sched.h 174SCHED_STATS opt_sched.h 175SCHED_ULE opt_sched.h 176SLEEPQUEUE_PROFILING 177SLHCI_DEBUG opt_slhci.h 178SPX_HACK 179STACK opt_stack.h 180SUIDDIR 181MSGMNB opt_sysvipc.h 182MSGMNI opt_sysvipc.h 183MSGSEG opt_sysvipc.h 184MSGSSZ opt_sysvipc.h 185MSGTQL opt_sysvipc.h 186SEMMNI opt_sysvipc.h 187SEMMNS opt_sysvipc.h 188SEMMNU opt_sysvipc.h 189SEMMSL opt_sysvipc.h 190SEMOPM opt_sysvipc.h 191SEMUME opt_sysvipc.h 192SHMALL opt_sysvipc.h 193SHMMAX opt_sysvipc.h 194SHMMAXPGS opt_sysvipc.h 195SHMMIN opt_sysvipc.h 196SHMMNI opt_sysvipc.h 197SHMSEG opt_sysvipc.h 198SYSVMSG opt_sysvipc.h 199SYSVSEM opt_sysvipc.h 200SYSVSHM opt_sysvipc.h 201SW_WATCHDOG opt_watchdog.h 202TURNSTILE_PROFILING 203UMTX_PROFILING 204VFS_AIO 205VERBOSE_SYSINIT opt_global.h 206WLCACHE opt_wavelan.h 207WLDEBUG opt_wavelan.h 208 209# POSIX kernel options 210P1003_1B_MQUEUE opt_posix.h 211P1003_1B_SEMAPHORES opt_posix.h 212_KPOSIX_PRIORITY_SCHEDULING opt_posix.h 213 214# Do we want the config file compiled into the kernel? 215INCLUDE_CONFIG_FILE opt_config.h 216 217# Options for static filesystems. These should only be used at config 218# time, since the corresponding lkms cannot work if there are any static 219# dependencies. Unusability is enforced by hiding the defines for the 220# options in a never-included header. 221AUTOFS opt_dontuse.h 222CD9660 opt_dontuse.h 223EXT2FS opt_dontuse.h 224FDESCFS opt_dontuse.h 225FFS opt_dontuse.h 226FUSE opt_dontuse.h 227MSDOSFS opt_dontuse.h 228NANDFS opt_dontuse.h 229NULLFS opt_dontuse.h 230PROCFS opt_dontuse.h 231PSEUDOFS opt_dontuse.h 232REISERFS opt_dontuse.h 233SMBFS opt_dontuse.h 234TMPFS opt_dontuse.h 235UDF opt_dontuse.h 236UNIONFS opt_dontuse.h 237ZFS opt_dontuse.h 238 239# Pseudofs debugging 240PSEUDOFS_TRACE opt_pseudofs.h 241 242# In-kernel GSS-API 243KGSSAPI opt_kgssapi.h 244KGSSAPI_DEBUG opt_kgssapi.h 245 246# These static filesystems have one slightly bogus static dependency in 247# sys/i386/i386/autoconf.c. If any of these filesystems are 248# statically compiled into the kernel, code for mounting them as root 249# filesystems will be enabled - but look below. 250NFSCLIENT opt_nfs.h 251NFSSERVER opt_nfs.h 252 253# Use these options to compile the experimental nfs client and/or 254# server that supports NFSv4 into a kernel. 255# NFSCL - client 256# NFSD - server 257NFSCL opt_nfs.h 258NFSD opt_nfs.h 259 260# filesystems and libiconv bridge 261CD9660_ICONV opt_dontuse.h 262MSDOSFS_ICONV opt_dontuse.h 263UDF_ICONV opt_dontuse.h 264 265# If you are following the conditions in the copyright, 266# you can enable soft-updates which will speed up a lot of thigs 267# and make the system safer from crashes at the same time. 268# otherwise a STUB module will be compiled in. 269SOFTUPDATES opt_ffs.h 270 271# On small, embedded systems, it can be useful to turn off support for 272# snapshots. It saves about 30-40k for a feature that would be lightly 273# used, if it is used at all. 274NO_FFS_SNAPSHOT opt_ffs.h 275 276# Enabling this option turns on support for Access Control Lists in UFS, 277# which can be used to support high security configurations. Depends on 278# UFS_EXTATTR. 279UFS_ACL opt_ufs.h 280 281# Enabling this option turns on support for extended attributes in UFS-based 282# filesystems, which can be used to support high security configurations 283# as well as new filesystem features. 284UFS_EXTATTR opt_ufs.h 285UFS_EXTATTR_AUTOSTART opt_ufs.h 286 287# Enable fast hash lookups for large directories on UFS-based filesystems. 288UFS_DIRHASH opt_ufs.h 289 290# Enable gjournal-based UFS journal. 291UFS_GJOURNAL opt_ufs.h 292 293# The below sentence is not in English, and neither is this one. 294# We plan to remove the static dependences above, with a 295# <filesystem>_ROOT option to control if it usable as root. This list 296# allows these options to be present in config files already (though 297# they won't make any difference yet). 298NFS_ROOT opt_nfsroot.h 299 300# SMB/CIFS requester 301NETSMB opt_netsmb.h 302 303# Options used only in subr_param.c. 304HZ opt_param.h 305MAXFILES opt_param.h 306NBUF opt_param.h 307NSFBUFS opt_param.h 308VM_BCACHE_SIZE_MAX opt_param.h 309VM_SWZONE_SIZE_MAX opt_param.h 310MAXUSERS 311DFLDSIZ opt_param.h 312MAXDSIZ opt_param.h 313MAXSSIZ opt_param.h 314 315# Generic SCSI options. 316CAM_MAX_HIGHPOWER opt_cam.h 317CAMDEBUG opt_cam.h 318CAM_DEBUG_COMPILE opt_cam.h 319CAM_DEBUG_DELAY opt_cam.h 320CAM_DEBUG_BUS opt_cam.h 321CAM_DEBUG_TARGET opt_cam.h 322CAM_DEBUG_LUN opt_cam.h 323CAM_DEBUG_FLAGS opt_cam.h 324CAM_BOOT_DELAY opt_cam.h 325SCSI_DELAY opt_scsi.h 326SCSI_NO_SENSE_STRINGS opt_scsi.h 327SCSI_NO_OP_STRINGS opt_scsi.h 328 329# Options used only in cam/ata/ata_da.c 330ADA_TEST_FAILURE opt_ada.h 331ATA_STATIC_ID opt_ada.h 332 333# Options used only in cam/scsi/scsi_cd.c 334CHANGER_MIN_BUSY_SECONDS opt_cd.h 335CHANGER_MAX_BUSY_SECONDS opt_cd.h 336 337# Options used only in cam/scsi/scsi_sa.c. 338SA_IO_TIMEOUT opt_sa.h 339SA_SPACE_TIMEOUT opt_sa.h 340SA_REWIND_TIMEOUT opt_sa.h 341SA_ERASE_TIMEOUT opt_sa.h 342SA_1FM_AT_EOD opt_sa.h 343 344# Options used only in cam/scsi/scsi_pt.c 345SCSI_PT_DEFAULT_TIMEOUT opt_pt.h 346 347# Options used only in cam/scsi/scsi_ses.c 348SES_ENABLE_PASSTHROUGH opt_ses.h 349 350# Options used in dev/sym/ (Symbios SCSI driver). 351SYM_SETUP_LP_PROBE_MAP opt_sym.h #-Low Priority Probe Map (bits) 352 # Allows the ncr to take precedence 353 # 1 (1<<0) -> 810a, 860 354 # 2 (1<<1) -> 825a, 875, 885, 895 355 # 4 (1<<2) -> 895a, 896, 1510d 356SYM_SETUP_SCSI_DIFF opt_sym.h #-HVD support for 825a, 875, 885 357 # disabled:0 (default), enabled:1 358SYM_SETUP_PCI_PARITY opt_sym.h #-PCI parity checking 359 # disabled:0, enabled:1 (default) 360SYM_SETUP_MAX_LUN opt_sym.h #-Number of LUNs supported 361 # default:8, range:[1..64] 362 363# Options used only in pci/ncr.c 364SCSI_NCR_DEBUG opt_ncr.h 365SCSI_NCR_MAX_SYNC opt_ncr.h 366SCSI_NCR_MAX_WIDE opt_ncr.h 367SCSI_NCR_MYADDR opt_ncr.h 368 369# Options used only in dev/isp/* 370ISP_TARGET_MODE opt_isp.h 371ISP_FW_CRASH_DUMP opt_isp.h 372ISP_DEFAULT_ROLES opt_isp.h 373ISP_INTERNAL_TARGET opt_isp.h 374 375# Options used only in dev/iscsi 376ISCSI_INITIATOR_DEBUG opt_iscsi_initiator.h 377 378# Net stuff. 379ACCEPT_FILTER_DATA 380ACCEPT_FILTER_DNS 381ACCEPT_FILTER_HTTP 382ALTQ opt_global.h 383ALTQ_CBQ opt_altq.h 384ALTQ_CDNR opt_altq.h 385ALTQ_DEBUG opt_altq.h 386ALTQ_HFSC opt_altq.h 387ALTQ_NOPCC opt_altq.h 388ALTQ_PRIQ opt_altq.h 389ALTQ_RED opt_altq.h 390ALTQ_RIO opt_altq.h 391BOOTP opt_bootp.h 392BOOTP_BLOCKSIZE opt_bootp.h 393BOOTP_COMPAT opt_bootp.h 394BOOTP_NFSROOT opt_bootp.h 395BOOTP_NFSV3 opt_bootp.h 396BOOTP_WIRED_TO opt_bootp.h 397DEVICE_POLLING 398DEV_ENC opt_enc.h 399DEV_PF opt_pf.h 400DEV_PFLOG opt_pf.h 401DEV_PFSYNC opt_pf.h 402DEV_VLAN opt_vlan.h 403DUMMYNET opt_ipdn.h 404ETHER_8022 opt_ef.h 405ETHER_8023 opt_ef.h 406ETHER_II opt_ef.h 407ETHER_SNAP opt_ef.h 408INET opt_inet.h 409INET6 opt_inet6.h 410IPDIVERT 411IPFILTER opt_ipfilter.h 412IPFILTER_DEFAULT_BLOCK opt_ipfilter.h 413IPFILTER_LOG opt_ipfilter.h 414IPFILTER_LOOKUP opt_ipfilter.h 415IPFIREWALL opt_ipfw.h 416IPFIREWALL_DEFAULT_TO_ACCEPT opt_ipfw.h 417IPFIREWALL_NAT opt_ipfw.h 418IPFIREWALL_VERBOSE opt_ipfw.h 419IPFIREWALL_VERBOSE_LIMIT opt_ipfw.h 420IPSEC opt_ipsec.h 421IPSEC_DEBUG opt_ipsec.h 422IPSEC_FILTERTUNNEL opt_ipsec.h 423IPSEC_NAT_T opt_ipsec.h 424IPSTEALTH 425IPX 426KRPC 427LIBALIAS 428LIBMBPOOL 429LIBMCHAIN 430MBUF_PROFILING 431MBUF_STRESS_TEST 432MROUTING opt_mrouting.h 433NETATALK opt_atalk.h 434NFSLOCKD 435PCBGROUP opt_pcbgroup.h 436PF_DEFAULT_TO_DROP opt_pf.h 437RADIX_MPATH opt_mpath.h 438ROUTETABLES opt_route.h 439SLIP_IFF_OPTS opt_slip.h 440TCPDEBUG 441TCP_OFFLOAD opt_inet.h # Enable code to dispatch TCP offloading 442TCP_SIGNATURE opt_inet.h 443VLAN_ARRAY opt_vlan.h 444XBONEHACK 445FLOWTABLE opt_route.h 446FLOWTABLE_HASH_ALL opt_route.h 447 448# 449# SCTP 450# 451SCTP opt_sctp.h 452SCTP_DEBUG opt_sctp.h # Enable debug printfs 453SCTP_WITH_NO_CSUM opt_sctp.h # Use this at your peril 454SCTP_LOCK_LOGGING opt_sctp.h # Log to KTR lock activity 455SCTP_MBUF_LOGGING opt_sctp.h # Log to KTR general mbuf aloc/free 456SCTP_MBCNT_LOGGING opt_sctp.h # Log to KTR mbcnt activity 457SCTP_PACKET_LOGGING opt_sctp.h # Log to a packet buffer last N packets 458SCTP_LTRACE_CHUNKS opt_sctp.h # Log to KTR chunks processed 459SCTP_LTRACE_ERRORS opt_sctp.h # Log to KTR error returns. 460SCTP_USE_PERCPU_STAT opt_sctp.h # Use per cpu stats. 461SCTP_MCORE_INPUT opt_sctp.h # Have multiple input threads for input mbufs 462SCTP_LOCAL_TRACE_BUF opt_sctp.h # Use tracebuffer exported via sysctl 463SCTP_DETAILED_STR_STATS opt_sctp.h # Use per PR-SCTP policy stream stats 464# 465# 466# 467 468# Netgraph(4). Use option NETGRAPH to enable the base netgraph code. 469# Each netgraph node type can be either be compiled into the kernel 470# or loaded dynamically. To get the former, include the corresponding 471# option below. Each type has its own man page, e.g. ng_async(4). 472NETGRAPH 473NETGRAPH_DEBUG opt_netgraph.h 474NETGRAPH_ASYNC opt_netgraph.h 475NETGRAPH_ATMLLC opt_netgraph.h 476NETGRAPH_ATM_ATMPIF opt_netgraph.h 477NETGRAPH_BLUETOOTH opt_netgraph.h 478NETGRAPH_BLUETOOTH_BT3C opt_netgraph.h 479NETGRAPH_BLUETOOTH_H4 opt_netgraph.h 480NETGRAPH_BLUETOOTH_HCI opt_netgraph.h 481NETGRAPH_BLUETOOTH_L2CAP opt_netgraph.h 482NETGRAPH_BLUETOOTH_SOCKET opt_netgraph.h 483NETGRAPH_BLUETOOTH_UBT opt_netgraph.h 484NETGRAPH_BLUETOOTH_UBTBCMFW opt_netgraph.h 485NETGRAPH_BPF opt_netgraph.h 486NETGRAPH_BRIDGE opt_netgraph.h 487NETGRAPH_CAR opt_netgraph.h 488NETGRAPH_CISCO opt_netgraph.h 489NETGRAPH_DEFLATE opt_netgraph.h 490NETGRAPH_DEVICE opt_netgraph.h 491NETGRAPH_ECHO opt_netgraph.h 492NETGRAPH_EIFACE opt_netgraph.h 493NETGRAPH_ETHER opt_netgraph.h 494NETGRAPH_ETHER_ECHO opt_netgraph.h 495NETGRAPH_FEC opt_netgraph.h 496NETGRAPH_FRAME_RELAY opt_netgraph.h 497NETGRAPH_GIF opt_netgraph.h 498NETGRAPH_GIF_DEMUX opt_netgraph.h 499NETGRAPH_HOLE opt_netgraph.h 500NETGRAPH_IFACE opt_netgraph.h 501NETGRAPH_IP_INPUT opt_netgraph.h 502NETGRAPH_IPFW opt_netgraph.h 503NETGRAPH_KSOCKET opt_netgraph.h 504NETGRAPH_L2TP opt_netgraph.h 505NETGRAPH_LMI opt_netgraph.h 506# MPPC compression requires proprietary files (not included) 507NETGRAPH_MPPC_COMPRESSION opt_netgraph.h 508NETGRAPH_MPPC_ENCRYPTION opt_netgraph.h 509NETGRAPH_NAT opt_netgraph.h 510NETGRAPH_NETFLOW opt_netgraph.h 511NETGRAPH_ONE2MANY opt_netgraph.h 512NETGRAPH_PATCH opt_netgraph.h 513NETGRAPH_PIPE opt_netgraph.h 514NETGRAPH_PPP opt_netgraph.h 515NETGRAPH_PPPOE opt_netgraph.h 516NETGRAPH_PPTPGRE opt_netgraph.h 517NETGRAPH_PRED1 opt_netgraph.h 518NETGRAPH_RFC1490 opt_netgraph.h 519NETGRAPH_SOCKET opt_netgraph.h 520NETGRAPH_SPLIT opt_netgraph.h 521NETGRAPH_SPPP opt_netgraph.h 522NETGRAPH_TAG opt_netgraph.h 523NETGRAPH_TCPMSS opt_netgraph.h 524NETGRAPH_TEE opt_netgraph.h 525NETGRAPH_TTY opt_netgraph.h 526NETGRAPH_UI opt_netgraph.h 527NETGRAPH_VJC opt_netgraph.h 528NETGRAPH_VLAN opt_netgraph.h 529 530# NgATM options 531NGATM_ATM opt_netgraph.h 532NGATM_ATMBASE opt_netgraph.h 533NGATM_SSCOP opt_netgraph.h 534NGATM_SSCFU opt_netgraph.h 535NGATM_UNI opt_netgraph.h 536NGATM_CCATM opt_netgraph.h 537 538# DRM options 539DRM_DEBUG opt_drm.h 540 541TI_SF_BUF_JUMBO opt_ti.h 542TI_JUMBO_HDRSPLIT opt_ti.h 543 544# XXX Conflict: # of devices vs network protocol (Native ATM). 545# This makes "atm.h" unusable. 546NATM 547 548# DPT driver debug flags 549DPT_MEASURE_PERFORMANCE opt_dpt.h 550DPT_RESET_HBA opt_dpt.h 551 552# Misc debug flags. Most of these should probably be replaced with 553# 'DEBUG', and then let people recompile just the interesting modules 554# with 'make CC="cc -DDEBUG"'. 555CLUSTERDEBUG opt_debug_cluster.h 556DEBUG_1284 opt_ppb_1284.h 557VP0_DEBUG opt_vpo.h 558LPT_DEBUG opt_lpt.h 559PLIP_DEBUG opt_plip.h 560LOCKF_DEBUG opt_debug_lockf.h 561NETATALKDEBUG opt_atalk.h 562SI_DEBUG opt_debug_si.h 563 564# Fb options 565FB_DEBUG opt_fb.h 566FB_INSTALL_CDEV opt_fb.h 567 568# ppbus related options 569PERIPH_1284 opt_ppb_1284.h 570DONTPROBE_1284 opt_ppb_1284.h 571 572# smbus related options 573ENABLE_ALART opt_intpm.h 574 575# These cause changes all over the kernel 576BLKDEV_IOSIZE opt_global.h 577BURN_BRIDGES opt_global.h 578DEBUG opt_global.h 579DEBUG_LOCKS opt_global.h 580DEBUG_VFS_LOCKS opt_global.h 581DFLTPHYS opt_global.h 582DIAGNOSTIC opt_global.h 583INVARIANT_SUPPORT opt_global.h 584INVARIANTS opt_global.h 585MAXCPU opt_global.h 586MAXMEMDOM opt_global.h 587MAXPHYS opt_global.h 588MCLSHIFT opt_global.h 589MUTEX_DEBUG opt_global.h 590MUTEX_NOINLINE opt_global.h 591LOCK_PROFILING opt_global.h 592LOCK_PROFILING_FAST opt_global.h 593MSIZE opt_global.h 594REGRESSION opt_global.h 595RWLOCK_NOINLINE opt_global.h 596SX_NOINLINE opt_global.h 597VFS_BIO_DEBUG opt_global.h 598 599# These are VM related options 600VM_KMEM_SIZE opt_vm.h 601VM_KMEM_SIZE_SCALE opt_vm.h 602VM_KMEM_SIZE_MAX opt_vm.h 603VM_NRESERVLEVEL opt_vm.h 604VM_LEVEL_0_ORDER opt_vm.h 605NO_SWAPPING opt_vm.h 606MALLOC_MAKE_FAILURES opt_vm.h 607MALLOC_PROFILE opt_vm.h 608MALLOC_DEBUG_MAXZONES opt_vm.h 609 610# The MemGuard replacement allocator used for tamper-after-free detection 611DEBUG_MEMGUARD opt_vm.h 612 613# The RedZone malloc(9) protection 614DEBUG_REDZONE opt_vm.h 615 616# Standard SMP options 617SMP opt_global.h 618 619# Size of the kernel message buffer 620MSGBUF_SIZE opt_msgbuf.h 621 622# NFS options 623NFS_MINATTRTIMO opt_nfs.h 624NFS_MAXATTRTIMO opt_nfs.h 625NFS_MINDIRATTRTIMO opt_nfs.h 626NFS_MAXDIRATTRTIMO opt_nfs.h 627NFS_GATHERDELAY opt_nfs.h 628NFS_WDELAYHASHSIZ opt_nfs.h 629NFS_DEBUG opt_nfs.h 630 631# For the Bt848/Bt848A/Bt849/Bt878/Bt879 driver 632OVERRIDE_CARD opt_bktr.h 633OVERRIDE_TUNER opt_bktr.h 634OVERRIDE_DBX opt_bktr.h 635OVERRIDE_MSP opt_bktr.h 636BROOKTREE_SYSTEM_DEFAULT opt_bktr.h 637BROOKTREE_ALLOC_PAGES opt_bktr.h 638BKTR_OVERRIDE_CARD opt_bktr.h 639BKTR_OVERRIDE_TUNER opt_bktr.h 640BKTR_OVERRIDE_DBX opt_bktr.h 641BKTR_OVERRIDE_MSP opt_bktr.h 642BKTR_SYSTEM_DEFAULT opt_bktr.h 643BKTR_ALLOC_PAGES opt_bktr.h 644BKTR_USE_PLL opt_bktr.h 645BKTR_GPIO_ACCESS opt_bktr.h 646BKTR_NO_MSP_RESET opt_bktr.h 647BKTR_430_FX_MODE opt_bktr.h 648BKTR_SIS_VIA_MODE opt_bktr.h 649BKTR_USE_FREEBSD_SMBUS opt_bktr.h 650BKTR_NEW_MSP34XX_DRIVER opt_bktr.h 651 652# Options for uart(4) 653UART_PPS_ON_CTS opt_uart.h 654UART_POLL_FREQ opt_uart.h 655 656# options for bus/device framework 657BUS_DEBUG opt_bus.h 658 659# options for USB support 660USB_DEBUG opt_usb.h 661USB_HOST_ALIGN opt_usb.h 662USB_REQ_DEBUG opt_usb.h 663USB_TEMPLATE opt_usb.h 664USB_VERBOSE opt_usb.h 665USB_EHCI_BIG_ENDIAN_DESC opt_usb.h 666U3G_DEBUG opt_u3g.h 667UKBD_DFLT_KEYMAP opt_ukbd.h 668UPLCOM_INTR_INTERVAL opt_uplcom.h 669UVSCOM_DEFAULT_OPKTSIZE opt_uvscom.h 670UVSCOM_INTR_INTERVAL opt_uvscom.h 671 672# Embedded system options 673INIT_PATH 674 675ROOTDEVNAME 676 677FDC_DEBUG opt_fdc.h 678PCFCLOCK_VERBOSE opt_pcfclock.h 679PCFCLOCK_MAX_RETRIES opt_pcfclock.h 680 681KTR opt_global.h 682KTR_ALQ opt_ktr.h 683KTR_MASK opt_ktr.h 684KTR_CPUMASK opt_ktr.h 685KTR_COMPILE opt_global.h 686KTR_BOOT_ENTRIES opt_global.h 687KTR_ENTRIES opt_global.h 688KTR_VERBOSE opt_ktr.h 689WITNESS opt_global.h 690WITNESS_KDB opt_witness.h 691WITNESS_NO_VNODE opt_witness.h 692WITNESS_SKIPSPIN opt_witness.h 693OPENSOLARIS_WITNESS opt_global.h 694 695# options for ACPI support 696ACPI_DEBUG opt_acpi.h 697ACPI_MAX_TASKS opt_acpi.h 698ACPI_MAX_THREADS opt_acpi.h 699ACPI_DMAR opt_acpi.h 700 701# ISA support 702DEV_ISA opt_isa.h 703ISAPNP opt_isa.h 704 705# various 'device presence' options. 706DEV_BPF opt_bpf.h 707DEV_NETMAP opt_global.h 708DEV_MCA opt_mca.h 709DEV_CARP opt_carp.h 710DEV_SPLASH opt_splash.h 711 712# EISA support 713DEV_EISA opt_eisa.h 714EISA_SLOTS opt_eisa.h 715 716# ed driver 717ED_HPP opt_ed.h 718ED_3C503 opt_ed.h 719ED_SIC opt_ed.h 720 721# bce driver 722BCE_DEBUG opt_bce.h 723BCE_NVRAM_WRITE_SUPPORT opt_bce.h 724 725SOCKBUF_DEBUG opt_global.h 726 727 728# options for ubsec driver 729UBSEC_DEBUG opt_ubsec.h 730UBSEC_RNDTEST opt_ubsec.h 731UBSEC_NO_RNG opt_ubsec.h 732 733# options for hifn driver 734HIFN_DEBUG opt_hifn.h 735HIFN_RNDTEST opt_hifn.h 736 737# options for safenet driver 738SAFE_DEBUG opt_safe.h 739SAFE_NO_RNG opt_safe.h 740SAFE_RNDTEST opt_safe.h 741 742# syscons/vt options 743MAXCONS opt_syscons.h 744SC_ALT_MOUSE_IMAGE opt_syscons.h 745SC_CUT_SPACES2TABS opt_syscons.h 746SC_CUT_SEPCHARS opt_syscons.h 747SC_DEBUG_LEVEL opt_syscons.h 748SC_DFLT_FONT opt_syscons.h 749SC_DISABLE_KDBKEY opt_syscons.h 750SC_DISABLE_REBOOT opt_syscons.h 751SC_HISTORY_SIZE opt_syscons.h 752SC_KERNEL_CONS_ATTR opt_syscons.h 753SC_KERNEL_CONS_REV_ATTR opt_syscons.h 754SC_MOUSE_CHAR opt_syscons.h 755SC_NO_CUTPASTE opt_syscons.h 756SC_NO_FONT_LOADING opt_syscons.h 757SC_NO_HISTORY opt_syscons.h 758SC_NO_MODE_CHANGE opt_syscons.h 759SC_NO_SUSPEND_VTYSWITCH opt_syscons.h 760SC_NO_SYSMOUSE opt_syscons.h 761SC_NORM_ATTR opt_syscons.h 762SC_NORM_REV_ATTR opt_syscons.h 763SC_PIXEL_MODE opt_syscons.h 764SC_RENDER_DEBUG opt_syscons.h 765SC_TWOBUTTON_MOUSE opt_syscons.h 766VT_ALT_TO_ESC_HACK opt_syscons.h 767VT_FB_DEFAULT_WIDTH opt_syscons.h 768VT_FB_DEFAULT_HEIGHT opt_syscons.h 769VT_MAXWINDOWS opt_syscons.h 770VT_TWOBUTTON_MOUSE opt_syscons.h 771DEV_SC opt_syscons.h 772DEV_VT opt_syscons.h 773 774# teken terminal emulator options 775TEKEN_CONS25 opt_teken.h 776TEKEN_UTF8 opt_teken.h 777TERMINAL_KERN_ATTR opt_teken.h 778TERMINAL_NORM_ATTR opt_teken.h 779 780# options for printf 781PRINTF_BUFR_SIZE opt_printf.h 782 783# kbd options 784KBD_DISABLE_KEYMAP_LOAD opt_kbd.h 785KBD_INSTALL_CDEV opt_kbd.h 786KBD_MAXRETRY opt_kbd.h 787KBD_MAXWAIT opt_kbd.h 788KBD_RESETDELAY opt_kbd.h 789KBDIO_DEBUG opt_kbd.h 790 791# options for the Atheros driver 792ATH_DEBUG opt_ath.h 793ATH_TXBUF opt_ath.h 794ATH_RXBUF opt_ath.h 795ATH_DIAGAPI opt_ath.h 796ATH_TX99_DIAG opt_ath.h 797ATH_ENABLE_11N opt_ath.h 798ATH_ENABLE_DFS opt_ath.h 799ATH_EEPROM_FIRMWARE opt_ath.h 800ATH_ENABLE_RADIOTAP_VENDOR_EXT opt_ath.h 801ATH_DEBUG_ALQ opt_ath.h 802ATH_KTR_INTR_DEBUG opt_ath.h 803 804# options for the Atheros hal 805AH_SUPPORT_AR5416 opt_ah.h 806# XXX For now, this breaks non-AR9130 chipsets, so only use it 807# XXX when actually targetting AR9130. 808AH_SUPPORT_AR9130 opt_ah.h 809 810# This is required for AR933x SoC support 811AH_SUPPORT_AR9330 opt_ah.h 812AH_SUPPORT_AR9340 opt_ah.h 813 814AH_DEBUG opt_ah.h 815AH_ASSERT opt_ah.h 816AH_DEBUG_ALQ opt_ah.h 817AH_REGOPS_FUNC opt_ah.h 818AH_WRITE_REGDOMAIN opt_ah.h 819AH_DEBUG_COUNTRY opt_ah.h 820AH_WRITE_EEPROM opt_ah.h 821AH_PRIVATE_DIAG opt_ah.h 822AH_NEED_DESC_SWAP opt_ah.h 823AH_USE_INIPDGAIN opt_ah.h 824AH_MAXCHAN opt_ah.h 825AH_RXCFG_SDMAMW_4BYTES opt_ah.h 826AH_INTERRUPT_DEBUGGING opt_ah.h 827# AR5416 and later interrupt mitigation 828# XXX do not use this for AR9130 829AH_AR5416_INTERRUPT_MITIGATION opt_ah.h 830 831# options for the Broadcom BCM43xx driver (bwi) 832BWI_DEBUG opt_bwi.h 833BWI_DEBUG_VERBOSE opt_bwi.h 834 835# options for the Marvell 8335 wireless driver 836MALO_DEBUG opt_malo.h 837MALO_TXBUF opt_malo.h 838MALO_RXBUF opt_malo.h 839 840# options for the Marvell wireless driver 841MWL_DEBUG opt_mwl.h 842MWL_TXBUF opt_mwl.h 843MWL_RXBUF opt_mwl.h 844MWL_DIAGAPI opt_mwl.h 845MWL_AGGR_SIZE opt_mwl.h 846MWL_TX_NODROP opt_mwl.h 847 848# Options for the Intel 802.11n wireless driver 849IWN_DEBUG opt_iwn.h 850 851# dcons options 852DCONS_BUF_SIZE opt_dcons.h 853DCONS_POLL_HZ opt_dcons.h 854DCONS_FORCE_CONSOLE opt_dcons.h 855DCONS_FORCE_GDB opt_dcons.h 856 857# HWPMC options 858HWPMC_HOOKS 859HWPMC_MIPS_BACKTRACE opt_hwpmc_hooks.h 860 861# XBOX options for FreeBSD/i386, but some files are MI 862XBOX opt_xbox.h 863 864# Interrupt filtering 865INTR_FILTER 866 867# 802.11 support layer 868IEEE80211_DEBUG opt_wlan.h 869IEEE80211_DEBUG_REFCNT opt_wlan.h 870IEEE80211_AMPDU_AGE opt_wlan.h 871IEEE80211_SUPPORT_MESH opt_wlan.h 872IEEE80211_SUPPORT_SUPERG opt_wlan.h 873IEEE80211_SUPPORT_TDMA opt_wlan.h 874IEEE80211_ALQ opt_wlan.h 875IEEE80211_DFS_DEBUG opt_wlan.h 876 877# 802.11 TDMA support 878TDMA_SLOTLEN_DEFAULT opt_tdma.h 879TDMA_SLOTCNT_DEFAULT opt_tdma.h 880TDMA_BINTVAL_DEFAULT opt_tdma.h 881TDMA_TXRATE_11B_DEFAULT opt_tdma.h 882TDMA_TXRATE_11G_DEFAULT opt_tdma.h 883TDMA_TXRATE_11A_DEFAULT opt_tdma.h 884TDMA_TXRATE_TURBO_DEFAULT opt_tdma.h 885TDMA_TXRATE_HALF_DEFAULT opt_tdma.h 886TDMA_TXRATE_QUARTER_DEFAULT opt_tdma.h 887TDMA_TXRATE_11NA_DEFAULT opt_tdma.h 888TDMA_TXRATE_11NG_DEFAULT opt_tdma.h 889 890# Network stack virtualization options 891VIMAGE opt_global.h 892VNET_DEBUG opt_global.h 893 894# Common Flash Interface (CFI) options 895CFI_SUPPORT_STRATAFLASH opt_cfi.h 896CFI_ARMEDANDDANGEROUS opt_cfi.h 897 898# Sound options 899SND_DEBUG opt_snd.h 900SND_DIAGNOSTIC opt_snd.h 901SND_FEEDER_MULTIFORMAT opt_snd.h 902SND_FEEDER_FULL_MULTIFORMAT opt_snd.h 903SND_FEEDER_RATE_HP opt_snd.h 904SND_PCM_64 opt_snd.h 905SND_OLDSTEREO opt_snd.h 906 907X86BIOS 908 909# Flattened device tree options 910FDT opt_platform.h 911FDT_DTB_STATIC opt_platform.h 912 913# OFED Infiniband stack 914OFED opt_ofed.h 915OFED_DEBUG_INIT opt_ofed.h 916SDP opt_ofed.h 917SDP_DEBUG opt_ofed.h 918IPOIB opt_ofed.h 919IPOIB_DEBUG opt_ofed.h 920IPOIB_CM opt_ofed.h 921 922# Resource Accounting 923RACCT opt_global.h 924 925# Resource Limits 926RCTL opt_global.h 927 928# Random number generator(s) 929RANDOM_YARROW opt_random.h 930RANDOM_FORTUNA opt_random.h 931RANDOM_DEBUG opt_random.h 932RANDOM_RWFILE opt_random.h 933