12007-07-02 Alan Modra <amodra@bigpond.net.au> 2 3 PR 4716 4 * objcopy.c (filter_symbols): Correct relocatable file test. 5 62007-07-02 Alan Modra <amodra@bigpond.net.au> 7 8 * Makefile.am: Run "make dep-am". 9 * Makefile.in: Regenerate. 10 * aclocal.m4: Regenerate. 11 * config.in: Regenerate. 12 * doc/Makefile.in: Regenerate. 13 * po/POTFILES.in: Regenerate. 14 * po/binutils.pot: Regenerate. 15 162007-06-30 H.J. Lu <hongjiu.lu@intel.com> 17 18 * aclocal.m4: Regenerated. 19 * doc/Makefile.in: Likewise. 20 * Makefile.in: Likewise. 21 222007-06-29 Joseph Myers <joseph@codesourcery.com> 23 24 * readelf.c (display_power_gnu_attribute, process_power_specific): 25 New. 26 (process_arch_specific): Call process_power_specific. 27 282007-06-29 Joseph Myers <joseph@codesourcery.com> 29 30 * readelf.c (display_mips_gnu_attribute): New. 31 (process_mips_specific): Call process_attributes. 32 332007-06-29 Joseph Myers <joseph@codesourcery.com> 34 35 * readelf.c (display_gnu_attribute): New. 36 (process_arm_specific): Rearrange as process_attributes. 37 (process_arm_specific): Replace by wrapper of process_attributes. 38 392007-06-28 Roland McGrath <roland@frob.com> 40 41 * objcopy.c (setup_section): Don't reset ELF section type to 42 SHT_NOBITS when it is SHT_NOTE. 43 * doc/binutils.texi (objcopy, strip): Mention under --only-keep-debug. 44 452007-06-27 Alan Modra <amodra@bigpond.net.au> 46 47 * ar.c: Rename uses of bfd.next to bfd.archive_next throughout. 48 * arsup.c: Likewise. 49 * binemul.c: Likewise. 50 * objcopy.c: Likewise. 51 * dlltool.c: Likewise. 52 532007-06-26 Shantonu Sen <ssen@apple.com> 54 55 PR binutils/4693 56 * Makefile.am (windres_DEPENDENCIES, windmc_DEPENDENCIES): Move 57 dependency on $(LIBICONV) to ... 58 (windres_LDADD, windmc_LDADD) ... here. 59 * Makefile.in: Regenerate. 60 612007-06-21 Alan Modra <amodra@bigpond.net.au> 62 63 * embedspu.sh (relas): Correct sh_info parsing. 64 652007-06-19 Danny Smith <dannysmith@users.sourceforge.net> 66 67 * objdump.c: Include sys/stat.h. 68 692007-06-19 Kai Tietz <kai.tietz@onevision.com> 70 71 * Makefile.am: Add windmc tool. 72 * Makefile.in: Regenerate. 73 * configure.in: Add windmc tool. 74 * configure: Regenerate. 75 * mclex.c: New. 76 * mcparse.y: New. 77 * windmc.c: New. 78 * windmc.h: New. 79 * doc/Makefile.am: Add windmc tool. 80 * doc/Makefile.in: Regenerate. 81 * doc/binutils.texi: Add windmc documentation. 82 * NEWS: Mention new tool. 83 842007-06-18 Andi Kleen <ak@suse.de> 85 86 * objdump.c: Include sys/mman.h 87 (print_file_list): Remove f, add map, mapsize, linemap, maxline, 88 last_line, first fields. 89 (slurp_file): Add. 90 (index_file): Add. 91 (print_file_open): Call slurp_file and index_file. Initialize new 92 fields. 93 (skip_to_line): Rename to print_line and write only single line. 94 (dump_line): Add. 95 (show_line): Change to new algorithm. 96 972007-06-18 Thomas Weidenmueller <w3seek@reactos.org> 98 99 * resres.c (probe_binary): Fix test for badly formatted headers. 100 1012007-06-18 Kai Tietz <Kai.Tietz@onevision.com> 102 103 * rclex.c: (cpp_line): Add code_page pragma support. 104 * windres.c: (usage, long_options, main): Add new option 105 --codepage or -c. 106 * winduni.c: (wind_default_codepage, wind_current_codepage): New. 107 (unicode_from_ascii, ascii_from_unicode): Use 108 wind_current_codepage as codepage parameter. 109 (unicode_print): Print 4 characters for hexadecimal values in 110 unicode strings. 111 * winduni.h: (wind_default_codepage, wind_current_codepage): 112 Export. 113 * doc/binutils.texi: Document new option. 114 * NEWS: Mention new features of windres. 115 1162007-06-18 Brian D. Watt <bwatt@us.ibm.com> 117 118 * embedspu.sh: Parse _SPUEAR_ symbol values as hex. 119 1202007-06-14 H.J. Lu <hongjiu.lu@intel.com> 121 122 * Makefile.am (ACLOCAL_AMFLAGS): Add -I ../config -I ../bfd. 123 124 * acinclude.m4: Removed. 125 126 * Makefile.in: Regenerated. 127 * aclocal.m4: Likewise. 128 * configure: Likewise. 129 1302007-06-11 Nathan Sidwell <nathan@codesourcery.com> 131 132 * dwarf.c (decode_location_expression): Add DW_OP_form_tls_address. 133 1342007-06-06 Kai Tietz <Kai.Tietz@onevision.com> 135 136 PR binutils/4356 binutils/591 137 * resrc.c (filename_need_quotes): New function. 138 (look_for_default): If filename_need_quotes is true then quote the 139 filename in the command line being created. 140 (read_rc_file): Likewise. 141 1422007-06-06 Ben Elliston <bje@au.ibm.com> 143 144 * doc/binutils.texi (objdump): Fix capitalisation of "PowerPC". 145 1462007-06-05 Kai Tietz <Kai.Tietz@onevision.com> 147 148 * Makefile.am: Add LIBICONV to windres. 149 * acinclude.m4: Added missing "lib-*.m4" and "lt*.m4" files. 150 * configure.in: Add AC_CHECK_HEADER for iconv.h and use AM_ICONV. 151 * config.in: Add ICONV defines. 152 * aclocal.m4: Regenerate. 153 * confugure: Regenerate. 154 * winduni.c: (local_iconv_map codepages, wind_language_t, 155 languages, unicode_is_valid_codepage, wind_find_language_by_id, 156 wind_find_language_by_codepage, wind_find_codepage_info, 157 unicode_from_codepage, codepage_from_unicode, iconv_onechar, 158 wind_iconv_cp, wind_MultiByteToWideChar wind_WideCharToMultiByte): 159 New. 160 (ascii_from_unicode): Use codepage_from_unicode. 161 (ascii_from_unicode): Use unicode_from_codepage. 162 Use for cygwin windows API for unicode transformation. 163 * winduni.h: (CP_ACP, CP_UTF7, CP_UTF8, CP_OEM, CP_UTF16): New 164 macros. 165 (wind_language_t, local_iconv_map): New types. 166 (wind_find_language_by_id, wind_find_language_by_codepage, 167 unicode_is_valid_codepage, wind_find_codepage_info, 168 unicode_from_codepage, codepage_from_unicode): New 169 prototypes. 170 1712007-06-05 Alan Modra <amodra@bigpond.net.au> 172 173 * embedspu.sh: Handle R_SPU_PPU* relocs with no symbol. 174 1752007-05-30 Alan Modra <amodra@bigpond.net.au> 176 177 * objcopy.c (copy_object): Revert 2007-05-11 change. Don't 178 avoid calling bfd_copy_private_bfd_data for ELF STRIP_NONDEBUG. 179 (setup_section): Don't modify flags, and don't avoid calling 180 bfd_copy_private_section_data for ELF STRIP_NONDEBUG. 181 * readelf.c (process_program_headers): Ignore .dynamic of type 182 SHT_NOBITS. 183 1842007-05-29 Alan Modra <amodra@bigpond.net.au> 185 186 * embedspu.sh: Emit SPU ELF image to .data.rel.ro.speelf if 187 pic or pie and image needs relocs. 188 1892007-05-24 Steve Ellcey <sje@cup.hp.com> 190 191 * Makefile.in: Regenerate. 192 * configure: Regenerate. 193 * aclocal.m4: Regenerate. 194 * doc/Makefile.in: Regenerate. 195 1962007-05-24 Kai Tietz <Kai.Tietz@onevision.com> 197 198 * rcparse.y: Join strings for elements having no side-effects in 199 "rc"-grammar. 200 2012007-05-23 Kai Tietz <Kai.Tietz@onevision.com> 202 203 * rclex.c: New file replacing rclex.l. 204 * rclex.l: Removed. 205 * windint.h: New file holding common structure and type 206 definitions. 207 * Makefile.am: Added new header windint.h and exchanged rclex.l by 208 rclex.c. 209 * Makefile.in: Regenerate. 210 * rcparse.y: Renamed some structures. 211 Use in internal representation always bfd_vma instead of long or 212 int. 213 Removed from %union unused stringtable. 214 Added to %union suni structure for unicode strings. 215 Added new tokens for ANICURSOR, ANIICON, DLGINCLUDE, 216 DLGINIT, FONTDIR, HTML, MANIFEST, PLUGPLAY, VXD, 217 TOOLBAR, BUTTON, QUOTEDUNISTRING, and SIZEDUNISTRING. 218 Added support for these new rc file tokens. 219 * resbin.c: Rewrote using bfd and binary structures, and support 220 new resource types. 221 * rescoff.c: Likewise. 222 * resres.c: Likewise. 223 * resrc.c: Likewise. Dumps as RC are now recompilable. 224 * windres.c: As above. Using bfd for res and provide target 225 specific endianess support. 226 * windres.h: Use windint.h as include. Additionally removed K&R 227 syntax. 228 * winduni.c: New printing and unichar support routines. 229 * winduni.h: Prototypes for new unichar helpers. 230 * windint.h: New file. 231 2322007-05-22 Paul Brook <paul@codesourcery.com> 233 234 * objdump.c (find_symbol_for_address): Merge section and target 235 specific filtering code. 236 2372007-05-22 Nick Clifton <nickc@redhat.com> 238 239 * doc/binutils.texi: Use @copying around the copyright notice. 240 2412007-05-21 Richard Sandiford <richard@codesourcery.com> 242 243 * objdump.c (disassemble_bytes): Ignore disassembler_needs_relocs 244 for executables and shared libraries. 245 2462007-05-18 Nathan Sidwell <nathan@codesourcery.com> 247 248 * objcopy.c (strip_main): Detect identical input and output file 249 names. 250 (copy_main): Refactor tempname detection and use. 251 2522007-05-17 Nick Clifton <nickc@redhat.com> 253 254 * objdump.c (load_debug_section): Select bias for DWARF debug 255 addresses based on the flavour of the bfd. 256 2572007-05-11 Alan Modra <amodra@bigpond.net.au> 258 259 PR 4479 260 * objcopy.c (copy_object): Don't copy ELF program headers for 261 --only-keep-debug. 262 2632007-05-11 Alan Modra <amodra@bigpond.net.au> 264 265 * embedspu.sh (find_prog): Prefer prog in same dir as embedspu 266 over one found on the users path. 267 (main): Generate .reloc for each R_SPU_PPU* reloc. 268 2692007-04-28 Alan Modra <amodra@bigpond.net.au> 270 271 * prdbg.c (tg_variable): Adjust for changed demangler. 272 (tg_start_function): Likewise. 273 2742007-04-27 Alan Modra <amodra@bigpond.net.au> 275 276 * bucumm.h: Split off host dependencies to.. 277 * sysdep.h: ..here. 278 Many files: Include sysdep.h. Remove duplicate headers and reorder. 279 * Makefile.am: Run "make dep-am". 280 * Makefile.in: Regenerate. 281 2822007-04-24 Nick Clifton <nickc@redhat.com> 283 284 * srconv.c (walk_tree_type_1): Initialise dpt.dunno. 285 2862007-04-24 Nathan Froyd <froydnj@codesourcery.com> 287 Phil Edwards <phil@codesourcery.com> 288 289 * objcopy.c (filter_symbols): Explicitly stripping a symbol 290 used in relocations is an error. 291 Retype 'keep' to bfd_boolean. 292 2932007-04-24 Alan Modra <amodra@bigpond.net.au> 294 295 * Makefile.in: Regenerate. 296 * doc/Makefile.in: Regenerate. 297 2982007-04-20 Nathan Froyd <froydnj@codesourcery.com> 299 Phil Edwards <phil@codesourcery.com> 300 Thomas de Lellis <tdel@windriver.com> 301 302 * objcopy.c (reverse_bytes): New variable. 303 (command_line_switch, copy_main): Add OPTION_REVERSE_ENDIAN. 304 (copy_options, copy_usage): Add "reverse-bytes" entry. 305 (copy_section): Reverse bytes within output sections. 306 * doc/binutils.texi: Document new objcopy option. 307 3082007-04-20 Nick Clifton <nickc@redhat.com> 309 310 * rclex.l: Allow underscores at the start of identifiers. 311 3122007-04-19 Alan Modra <amodra@bigpond.net.au> 313 314 * budemang.c: Delete. 315 * budemang.h: Delete. 316 * addr2line.c (translate_addresses): Call bfd_demangle rather than 317 demangle. 318 * nm.c (print_symname): Likewise. 319 * objdump.c (objdump_print_symname, dump_symbols): Likewise. 320 (dump_bfd): Likewise. 321 * prdbg.c (struct pr_handle <demangler>): Add int param. 322 (tg_variable, tg_start_function): Adjust demangler calls. 323 * Makefile.am: Remove mention of budemang.[ch]. Run "make dep-am". 324 * Makefile.in: Regenerate. 325 * po/POTFILES.in: Regenerate. 326 3272007-04-14 Steve Ellcey <sje@cup.hp.com> 328 329 * Makefile.am: Add ACLOCAL_AMFLAGS. 330 * configure.in: Change macro call order. 331 * Makefile.in: Regenerate. 332 * configure: Regenerate. 333 3342007-04-13 Nathan Sidwell <nathan@codesourcery.com> 335 336 * Makefile.am (TOOL_PROGS): Add objcopy. 337 * Makefile.in: Rebuilt. 338 3392007-04-12 H.J. Lu <hongjiu.lu@intel.com> 340 341 PR binutils/4348 342 * objcopy.c (copy_object): Don't stop when there are no 343 sections to be copied. 344 3452007-04-10 Vladimir Prus <vladimir@codesourcery.com> 346 347 * NEWS: Mention disjoint histograms support in 348 gprof. 349 3502007-04-09 Daniel Jacobowitz <dan@codesourcery.com> 351 352 * dwarf.c (process_debug_info): Do not require DW_AT_frame_base for 353 DW_TAG_inlined_subroutine. 354 3552007-04-06 Matt Thomas <matt@netbsd.org> 356 357 * MAINTAINERS: Add myself as VAX and NetBSD support maintainer. 358 3592007-04-05 Alan Modra <amodra@bigpond.net.au> 360 361 PR binutils/4292 362 * nm.c (print_value): Cast bfd_vma to unsigned long to suit 363 value_format_32bit. 364 3652007-04-02 Nick Clifton <nickc@redhat.com> 366 367 PR binutils/4292 368 * nm.c (value_format): Replace with value_format_32bit and 369 value_format_64bit. 370 (set_radix): Update setting of value_format. 371 (set_print_width): New function. Compute the address size of a 372 given bfd and set the print_width global appropriately. 373 (display_archive): Use set_print_width. 374 (display_file): Likewise, 375 (print_object_filename_sysv): Update use of print_width. 376 (print_archive_member_sysv): Likewise. 377 (print_symbol_filename_posix): Likewise. 378 (print_sumbol_info_bfd, print_symbol_info_sysv): Likewise. 379 3802007-03-28 Richard Sandiford <richard@codesourcery.com> 381 Phil Edwards <phil@codesourcery.com> 382 383 * doc/binutils.texi: Put the contents after the title page rather 384 than at the end of the document. 385 3862007-03-28 Nick Clifton <nickc@redhat.com> 387 388 * readelf.c (slurp_rela_relocs): Add newline to end of error 389 messages. 390 (slurp_rel_relocs, request_dump, request_dump_byname, 391 process_program_headers, process_dynamic_section, 392 process_symbol_table, process_mips_specific, main): Likewise. 393 3942007-03-28 Alan Modra <amodra@bigpond.net.au> 395 396 * MAINTAINERS: Update mailing list addresses. Add myself 397 as PPC maintainer. 398 3992007-03-27 Alan Modra <amodra@bigpond.net.au> 400 401 * embedspu.sh: Correct toe_addr quoting. 402 4032007-03-27 Alan Modra <amodra@bigpond.net.au> 404 405 * embedspu.sh: Combine "_EAR_" and "_EAR_*" patterns. Tighten 406 .toe section and .toe address checks. Use .reloc for _EAR* 407 symbols defined in non-BSS sections. Build table for _SPUEAR_ 408 symbols. 409 4102007-03-23 Kaz Kojima <kkojima@rr.iij4u.or.jp> 411 412 PR gas/3811 413 * readelf.c (debug_apply_rela_addends): Do nothing for SH. 414 4152007-03-22 Joseph Myers <joseph@codesourcery.com> 416 417 * doc/binutils.texi: Include VERSION_PACKAGE when reporting 418 version. 419 4202007-03-16 Kai Tietz <Kai.Tietz@onevision.com> 421 422 * dlltool.c (make_one_lib_file): Use pc-relative relocation 423 instead of an absolute relocation for x86_64-pc-mingw32 target. 424 4252007-03-15 H.J. Lu <hongjiu.lu@intel.com> 426 427 * Makefile.am (REPORT_BUGS_TO): Removed. 428 (INCLUDES): Remove -DREPORT_BUGS_TO. 429 * Makefile.in: Regenerated. 430 431 * bucomm.c: Don't include bfdver.h. 432 * objdump.c: Likewise. 433 * version.c: Likewise. 434 435 * bucomm.h: Include bfdver.h. 436 437 * configure.in (--with-bugurl): Removed. 438 * configure: Regenerated. 439 440 * doc/Makefile.am (binutils_TEXINFOS): Removed. 441 (AM_MAKEINFOFLAGS): Add -I ../../bfd/doc. 442 (TEXI2DVI): Likewise. 443 (config.texi): Removed. 444 (MOSTLYCLEANFILES): Remove config.texi. 445 * doc/Makefile.in: Regenerated. 446 447 * doc/binutils.texi: Include bfdver.texi instead of 448 config.texi. 449 4502007-03-13 Nick Clifton <nickc@redhat.com> 451 452 * readelf.c (dump_section): Also test for SHT_REL sections when 453 producing the warning about unapplied relocs. 454 4552007-03-07 Joseph Myers <joseph@codesourcery.com> 456 457 * configure.in (REPORT_BUGS_TEXI): Define to Texinfo version of 458 bug-reporting URL. 459 * doc/Makefile.am (config.texi): Define BUGURL. 460 * doc/binutils.texi: Use BUGURL. Remove text about large files 461 and uuencoding. 462 * Makefile.in, configure, doc/Makefile.in: Regenerate. 463 4642007-03-01 Phil Edwards <phil@codesourcery.com> 465 Richard Sandiford <richard@codesourcery.com> 466 467 * NEWS: Mention addition of --extract-symbol. 468 * doc/binutils.texi: Document it. 469 * objcopy.c (extract_symbol): New variable. 470 (OPTION_EXTRACT_SYMBOLS): New command_line_switch. 471 (copy_options): Add an entry for --extract-symbol. 472 (copy_usage): Mention --extract-symbol. 473 (copy_object): Set the start address to zero for --extract-symbol. 474 Do not copy private BFD data in that case. 475 (setup_section): Set the size, LMA and VMA to zero for 476 --extract-symbol. Do not copy private BFD data in that case. 477 (copy_section): Do not copy section contents if --extract-symbol 478 is passed. 479 (copy_main): Set extract_symbol to TRUE if --extract-symbol 480 is passed. 481 4822007-03-01 Paul Brook <paul@codesourcery.com> 483 484 * MAINTAINERS: Update my entry. 485 4862007-03-01 Joseph Myers <joseph@codesourcery.com> 487 488 * version.c: Update copyright date. 489 4902007-03-01 Daniel Jacobowitz <dan@codesourcery.com> 491 492 * Makefile.am (install-exec-local): Depend on $(noinst_PROGRAMS). 493 Adjust $(EXEEXT) handling for $(RENAMED_PROGS). 494 * Makefile.in, doc/Makefile.in: Regenerate. 495 4962007-03-01 Alan Modra <amodra@bigpond.net.au> 497 498 * embedspu.sh: Set type and size of global program handle symbol. 499 5002007-02-28 Alan Modra <amodra@bigpond.net.au> 501 502 * Makefile.am (PROGS): Delete. 503 (RENAMED_PROGS): Define. Extracted from.. 504 (noinst_PROGRAMS): ..here. Add BUILD_MISC. 505 (install-exec-local): Adjust. 506 * Makefile.in: Regenerate. 507 5082007-02-28 Alan Modra <amodra@bigpond.net.au> 509 510 * Makefile.am (PROGS): Add BUILD_INSTALL_MISC. 511 (bin_PROGRAMS): Replace BUILD_MISC with BUILD_INSTALL_MISC. 512 (EXTRA_PROGRAMS): Remove bin2c. 513 (bin2c$(EXEEXT_FOR_BUILD)): New rule. 514 (bin2c_SOURCES): Delete. 515 (DISTCLEANFILES): Remove sysinfo. 516 (MOSTLYCLEANFILES): Add sysinfo$(EXEEXT_FOR_BUILD) and 517 bin2c$(EXEEXT_FOR_BUILD). 518 * configure.in (BUILD_MISC): Add $(EXEEXT_FOR_BUILD) to bin2c. 519 Move embedspu to.. 520 (BUILD_INSTALL_MISC): ..here. 521 * Makefile.in: Regenerate. 522 * configure: Regenerate. 523 5242007-02-27 Alan Modra <amodra@bigpond.net.au> 525 526 * bin2c.c: New file. 527 * Makefile.am (EXTRA_PROGRAMS): Add bin2c. 528 (CFILES): Add bin2c.c. 529 (bin2c_SOURCES): Define. 530 (bin2c.o): Dependencies from "make dep-am". 531 * configure.in (BUILD_MISC): Add bin2c. 532 * version.c: Update year. 533 * po/POTFILES.in: Regenerate. 534 * Makefile.in: Regenerate. 535 * configure: Regenerate. 536 5372007-02-17 Mark Mitchell <mark@codesourcery.com> 538 Nathan Sidwell <nathan@codesourcery.com> 539 Vladimir Prus <vladimir@codesourcery.com 540 Joseph Myers <joseph@codesourcery.com> 541 542 * configure.in (--with-bugurl): New option. 543 * configure: Regenerate. 544 * Makefile.am (REPORT_BUGS_TO): Define. 545 (INCLUDES): Define REPORT_BUGS_TO. 546 Regenerate dependencies. 547 * Makefile.in: Regenerate. 548 * doc/Makefile.in: Regenerate. 549 * bucomm.h: Remove include of bin-bugs.h. 550 * addr2line.c (usage): Don't print empty REPORT_BUGS_TO. 551 * ar.c (usage): Pass s to list_supported_targets. Don't print 552 empty REPORT_BUGS_TO. 553 * coffdump.c (show_usage): Don't print empty REPORT_BUGS_TO. 554 * cxxfilt.c (usage): Print bug url when giving help. 555 * dlltool.c (usage): Likewise. 556 * dllwrap.c (usage): Likewise. 557 * nlmconv.c (show_usage): Don't print empty REPORT_BUGS_TO. 558 * nm.c (usage): Likewise. 559 * objcopy.c (copy_usage, strip_usage): Likewise. 560 * objdump.c (usage): Likewise. 561 * readelf.c ((usage): Likewise. Add STREAM argument. Adjust 562 callers. 563 * size.c (usage): Don't print empty REPORT_BUGS_TO. 564 * srconv.c (show_usage): Likewise. 565 * strings.c (usage): Likewise. 566 * sysdymp.c (show_usage): Likewise. 567 * windres.c (usage): Likewise. 568 5692007-02-13 Alan Modra <amodra@bigpond.net.au> 570 571 * embedspu.sh: Add -W to readelf invocation. 572 5732007-02-06 Dave Brolley <brolley@redhat.com> 574 575 * MAINTAINERS: Add myself as the maintainer of the MeP port. 576 5772007-02-06 Nick Clifton <nickc@redhat.com> 578 579 PR gas/3800 580 * readelf.c: Include elf/h8.h twice. The first time in order to 581 get the reloc numbers, the second time in order to get the reloc 582 decoder function. 583 (dump_section): Tell the user if the section being displayed has 584 unprocessed relocs associated with it. 585 (get_reloc_size): New function - returns the size of a reloc. 586 (debug_apply_rela_addends): Use get_reloc_size(). 587 * dwarf.c (read_and_display_attr_value): Extend number of 588 languages known for the DW_AT_language attribute. 589 (process_debug_info): Display the attribute offset before decoding 590 the attribute, in case there are problems. 591 5922007-02-05 Dave Brolley <brolley@redhat.com> 593 594 * readelf.c (dump_relocations): Don't check for 595 (rtype == NULL && type == R_RELC). 596 5972007-02-05 Dave Brolley <brolley@redhat.com> 598 599 * Makefile.am (readelf.o): Depends on $(INCDIR)/elf/mep.h. 600 * Makefile.in: Regenerated. 601 * Contribute the following changes: 602 2003-10-29 Dave Brolley <brolley@redhat.com> 603 604 * configure.in: Define SKIP_ZEROES and SKIP_ZEROES_AT_END for mep. 605 * configure: Regenerated. 606 607 2001-04-03 Ben Elliston <bje@redhat.com> 608 609 * readelf.c: Include "elf/mep.h". 610 (guess_is_rela): Handle EM_CYGNUS_MEP. 611 (get_machine_name): Ditto. 612 (dump_relocations): Ditto. 613 6142007-02-02 H.J. Lu <hongjiu.lu@intel.com> 615 616 * MAINTAINERS: Add a space between H.J. and Lu. 617 6182007-02-02 H.J. Lu <hongjiu.lu@intel.com> 619 620 * doc/binutils.texi (objdump): Document the new addr64 option 621 for i386 disassembler. 622 6232007-02-02 H.J. Lu <hongjiu.lu@intel.com> 624 625 PR binutils/3945 626 * configure.in (DLLTOOL_DEFAULT): New. Defined for the first PE 627 target. 628 (DLLTOOL_DEFS): Add $DLLTOOL_DEFAULT. 629 * configure: Regenerated. 630 631 * dlltool.c (mname): Defined with DLLTOOL_DEFAULT_XXX. 632 6332007-02-02 Nick Clifton <nickc@redhat.com> 634 635 * doc/binutils.texi (objdump): Document support for disassembling 636 the 440 PowerPC architecture. 637 6382007-01-31 Nathan Sidwell <nathan@codesourcery.com> 639 640 * dwarf.c (process_debug_info): Protect against bogus length and 641 abbrev offsets. 642 6432007-01-25 Kazu Hirata <kazu@codesourcery.com> 644 645 * ar.c (print_contents, extract_file): Cast the return value 646 of fwrite to size_t. 647 6482007-01-12 Alan Modra <amodra@bigpond.net.au> 649 650 * ar.c (open_inarch): Check fwrite return. Use size_t. 651 (extract_file): Likewise. Remove test for "negative" file size. 652 * readelf.c (process_program_headers): Check fscanf return. 653 6542007-01-11 H.J. Lu <hongjiu.lu@intel.com> 655 656 * bucomm.c (template_in_dir): Fix typo. 657 6582007-01-11 Alan Modra <amodra@bigpond.net.au> 659 660 * embedspu.sh: New file. 661 * Makefile.am (embedspu): Add rule. 662 * configure.in (BUILD_MISC): Add embedspu for powerpc-linux. 663 * Makefile.in: Regenerate. 664 * configure: Regenerate. 665 6662007-01-11 Alan Modra <amodra@bigpond.net.au> 667 668 * bucomm.h (make_tempdir): Declare independently of HAVE_MKDTEMP. 669 * bucomm.c (template_in_dir): New function, split out from.. 670 (make_tempname): ..here. Open the file with O_EXCL if !HAVE_MKSTEMP. 671 (make_tempdir): Use template_in_dir. Handle directory creation 672 when !HAVE_MKDTEMP. 673 * objcopy.c (MKDIR): Don't define. 674 (copy_archive): Use make_tempdir when !HAVE_MKDTEMP too. Fix 675 error message. 676 6772007-01-08 Kazu Hirata <kazu@codesourcery.com> 678 679 * readelf.c (get_machine_flags): Treat Fido as an architecture 680 by itself. 681 6822007-01-08 Kai Tietz <kai.tietz@onevision.com> 683 684 * configure.in: Renamed target x86_64-*-mingw64 to 685 x86_64-*-mingw*. 686 * configure: Regenerated. 687 6882007-01-05 Alan Modra <amodra@bigpond.net.au> 689 690 * readelf.c (dump_section): Don't print 32-bit values, which 691 were done incorrectly for little-endian. Instead print bytes. 692 693For older changes see ChangeLog-2006 694 695Local Variables: 696mode: change-log 697left-margin: 8 698fill-column: 74 699version-control: never 700End: 701