1/* 2 * CDDL HEADER START 3 * 4 * The contents of this file are subject to the terms of the 5 * Common Development and Distribution License (the "License"). 6 * You may not use this file except in compliance with the License. 7 * 8 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE 9 * or http://www.opensolaris.org/os/licensing. 10 * See the License for the specific language governing permissions 11 * and limitations under the License. 12 * 13 * When distributing Covered Code, include this CDDL HEADER in each 14 * file and include the License file at usr/src/OPENSOLARIS.LICENSE. 15 * If applicable, add the following below this CDDL HEADER, with the 16 * fields enclosed by brackets "[]" replaced with your own identifying 17 * information: Portions Copyright [yyyy] [name of copyright owner] 18 * 19 * CDDL HEADER END 20 */ 21 22/* 23 * Copyright (c) 2005, 2010, Oracle and/or its affiliates. All rights reserved. 24 * Copyright (c) 2013, 2015 by Delphix. All rights reserved. 25 * Copyright 2016 Igor Kozhukhov <ikozhukhov@gmail.com>. 26 */ 27 28/* 29 * Functions to convert between a list of vdevs and an nvlist representing the 30 * configuration. Each entry in the list can be one of: 31 * 32 * Device vdevs 33 * disk=(path=..., devid=...) 34 * file=(path=...) 35 * 36 * Group vdevs 37 * raidz[1|2]=(...) 38 * mirror=(...) 39 * 40 * Hot spares 41 * 42 * While the underlying implementation supports it, group vdevs cannot contain 43 * other group vdevs. All userland verification of devices is contained within 44 * this file. If successful, the nvlist returned can be passed directly to the 45 * kernel; we've done as much verification as possible in userland. 46 * 47 * Hot spares are a special case, and passed down as an array of disk vdevs, at 48 * the same level as the root of the vdev tree. 49 * 50 * The only function exported by this file is 'make_root_vdev'. The 51 * function performs several passes: 52 * 53 * 1. Construct the vdev specification. Performs syntax validation and 54 * makes sure each device is valid. 55 * 2. Check for devices in use. Using libdiskmgt, makes sure that no 56 * devices are also in use. Some can be overridden using the 'force' 57 * flag, others cannot. 58 * 3. Check for replication errors if the 'force' flag is not specified. 59 * validates that the replication level is consistent across the 60 * entire pool. 61 * 4. Call libzfs to label any whole disks with an EFI label. 62 */ 63 64#include <assert.h> 65#include <devid.h> 66#include <errno.h> 67#include <fcntl.h> 68#include <libintl.h> 69#include <libnvpair.h> 70#include <limits.h> 71#include <stdio.h> 72#include <string.h> 73#include <unistd.h> 74#include <paths.h> 75#include <sys/stat.h> 76#include <sys/disk.h> 77#include <sys/mntent.h> 78#include <libgeom.h> 79 80#include "zpool_util.h" 81 82#define BACKUP_SLICE "s2" 83 84/* 85 * For any given vdev specification, we can have multiple errors. The 86 * vdev_error() function keeps track of whether we have seen an error yet, and 87 * prints out a header if its the first error we've seen. 88 */ 89boolean_t error_seen; 90boolean_t is_force; 91 92/*PRINTFLIKE1*/ 93static void 94vdev_error(const char *fmt, ...) 95{ 96 va_list ap; 97 98 if (!error_seen) { 99 (void) fprintf(stderr, gettext("invalid vdev specification\n")); 100 if (!is_force) 101 (void) fprintf(stderr, gettext("use '-f' to override " 102 "the following errors:\n")); 103 else 104 (void) fprintf(stderr, gettext("the following errors " 105 "must be manually repaired:\n")); 106 error_seen = B_TRUE; 107 } 108 109 va_start(ap, fmt); 110 (void) vfprintf(stderr, fmt, ap); 111 va_end(ap); 112} 113 114#ifdef illumos 115static void 116libdiskmgt_error(int error) 117{ 118 /* 119 * ENXIO/ENODEV is a valid error message if the device doesn't live in 120 * /dev/dsk. Don't bother printing an error message in this case. 121 */ 122 if (error == ENXIO || error == ENODEV) 123 return; 124 125 (void) fprintf(stderr, gettext("warning: device in use checking " 126 "failed: %s\n"), strerror(error)); 127} 128 129/* 130 * Validate a device, passing the bulk of the work off to libdiskmgt. 131 */ 132static int 133check_slice(const char *path, int force, boolean_t wholedisk, boolean_t isspare) 134{ 135 char *msg; 136 int error = 0; 137 dm_who_type_t who; 138 139 if (force) 140 who = DM_WHO_ZPOOL_FORCE; 141 else if (isspare) 142 who = DM_WHO_ZPOOL_SPARE; 143 else 144 who = DM_WHO_ZPOOL; 145 146 if (dm_inuse((char *)path, &msg, who, &error) || error) { 147 if (error != 0) { 148 libdiskmgt_error(error); 149 return (0); 150 } else { 151 vdev_error("%s", msg); 152 free(msg); 153 return (-1); 154 } 155 } 156 157 /* 158 * If we're given a whole disk, ignore overlapping slices since we're 159 * about to label it anyway. 160 */ 161 error = 0; 162 if (!wholedisk && !force && 163 (dm_isoverlapping((char *)path, &msg, &error) || error)) { 164 if (error == 0) { 165 /* dm_isoverlapping returned -1 */ 166 vdev_error(gettext("%s overlaps with %s\n"), path, msg); 167 free(msg); 168 return (-1); 169 } else if (error != ENODEV) { 170 /* libdiskmgt's devcache only handles physical drives */ 171 libdiskmgt_error(error); 172 return (0); 173 } 174 } 175 176 return (0); 177} 178 179 180/* 181 * Validate a whole disk. Iterate over all slices on the disk and make sure 182 * that none is in use by calling check_slice(). 183 */ 184static int 185check_disk(const char *name, dm_descriptor_t disk, int force, int isspare) 186{ 187 dm_descriptor_t *drive, *media, *slice; 188 int err = 0; 189 int i; 190 int ret; 191 192 /* 193 * Get the drive associated with this disk. This should never fail, 194 * because we already have an alias handle open for the device. 195 */ 196 if ((drive = dm_get_associated_descriptors(disk, DM_DRIVE, 197 &err)) == NULL || *drive == NULL) { 198 if (err) 199 libdiskmgt_error(err); 200 return (0); 201 } 202 203 if ((media = dm_get_associated_descriptors(*drive, DM_MEDIA, 204 &err)) == NULL) { 205 dm_free_descriptors(drive); 206 if (err) 207 libdiskmgt_error(err); 208 return (0); 209 } 210 211 dm_free_descriptors(drive); 212 213 /* 214 * It is possible that the user has specified a removable media drive, 215 * and the media is not present. 216 */ 217 if (*media == NULL) { 218 dm_free_descriptors(media); 219 vdev_error(gettext("'%s' has no media in drive\n"), name); 220 return (-1); 221 } 222 223 if ((slice = dm_get_associated_descriptors(*media, DM_SLICE, 224 &err)) == NULL) { 225 dm_free_descriptors(media); 226 if (err) 227 libdiskmgt_error(err); 228 return (0); 229 } 230 231 dm_free_descriptors(media); 232 233 ret = 0; 234 235 /* 236 * Iterate over all slices and report any errors. We don't care about 237 * overlapping slices because we are using the whole disk. 238 */ 239 for (i = 0; slice[i] != NULL; i++) { 240 char *name = dm_get_name(slice[i], &err); 241 242 if (check_slice(name, force, B_TRUE, isspare) != 0) 243 ret = -1; 244 245 dm_free_name(name); 246 } 247 248 dm_free_descriptors(slice); 249 return (ret); 250} 251 252/* 253 * Validate a device. 254 */ 255static int 256check_device(const char *path, boolean_t force, boolean_t isspare) 257{ 258 dm_descriptor_t desc; 259 int err; 260 char *dev; 261 262 /* 263 * For whole disks, libdiskmgt does not include the leading dev path. 264 */ 265 dev = strrchr(path, '/'); 266 assert(dev != NULL); 267 dev++; 268 if ((desc = dm_get_descriptor_by_name(DM_ALIAS, dev, &err)) != NULL) { 269 err = check_disk(path, desc, force, isspare); 270 dm_free_descriptor(desc); 271 return (err); 272 } 273 274 return (check_slice(path, force, B_FALSE, isspare)); 275} 276#endif /* illumos */ 277 278/* 279 * Check that a file is valid. All we can do in this case is check that it's 280 * not in use by another pool, and not in use by swap. 281 */ 282static int 283check_file(const char *file, boolean_t force, boolean_t isspare) 284{ 285 char *name; 286 int fd; 287 int ret = 0; 288 int err; 289 pool_state_t state; 290 boolean_t inuse; 291 292#ifdef illumos 293 if (dm_inuse_swap(file, &err)) { 294 if (err) 295 libdiskmgt_error(err); 296 else 297 vdev_error(gettext("%s is currently used by swap. " 298 "Please see swap(1M).\n"), file); 299 return (-1); 300 } 301#endif 302 303 if ((fd = open(file, O_RDONLY)) < 0) 304 return (0); 305 306 if (zpool_in_use(g_zfs, fd, &state, &name, &inuse) == 0 && inuse) { 307 const char *desc; 308 309 switch (state) { 310 case POOL_STATE_ACTIVE: 311 desc = gettext("active"); 312 break; 313 314 case POOL_STATE_EXPORTED: 315 desc = gettext("exported"); 316 break; 317 318 case POOL_STATE_POTENTIALLY_ACTIVE: 319 desc = gettext("potentially active"); 320 break; 321 322 default: 323 desc = gettext("unknown"); 324 break; 325 } 326 327 /* 328 * Allow hot spares to be shared between pools. 329 */ 330 if (state == POOL_STATE_SPARE && isspare) 331 return (0); 332 333 if (state == POOL_STATE_ACTIVE || 334 state == POOL_STATE_SPARE || !force) { 335 switch (state) { 336 case POOL_STATE_SPARE: 337 vdev_error(gettext("%s is reserved as a hot " 338 "spare for pool %s\n"), file, name); 339 break; 340 default: 341 vdev_error(gettext("%s is part of %s pool " 342 "'%s'\n"), file, desc, name); 343 break; 344 } 345 ret = -1; 346 } 347 348 free(name); 349 } 350 351 (void) close(fd); 352 return (ret); 353} 354 355static int 356check_device(const char *name, boolean_t force, boolean_t isspare) 357{ 358 char path[MAXPATHLEN]; 359 360 if (strncmp(name, _PATH_DEV, sizeof(_PATH_DEV) - 1) != 0) 361 snprintf(path, sizeof(path), "%s%s", _PATH_DEV, name); 362 else 363 strlcpy(path, name, sizeof(path)); 364 365 return (check_file(path, force, isspare)); 366} 367 368/* 369 * By "whole disk" we mean an entire physical disk (something we can 370 * label, toggle the write cache on, etc.) as opposed to the full 371 * capacity of a pseudo-device such as lofi or did. We act as if we 372 * are labeling the disk, which should be a pretty good test of whether 373 * it's a viable device or not. Returns B_TRUE if it is and B_FALSE if 374 * it isn't. 375 */ 376static boolean_t 377is_whole_disk(const char *arg) 378{ 379#ifdef illumos 380 struct dk_gpt *label; 381 int fd; 382 char path[MAXPATHLEN]; 383 384 (void) snprintf(path, sizeof (path), "%s%s%s", 385 ZFS_RDISK_ROOT, strrchr(arg, '/'), BACKUP_SLICE); 386 if ((fd = open(path, O_RDWR | O_NDELAY)) < 0) 387 return (B_FALSE); 388 if (efi_alloc_and_init(fd, EFI_NUMPAR, &label) != 0) { 389 (void) close(fd); 390 return (B_FALSE); 391 } 392 efi_free(label); 393 (void) close(fd); 394 return (B_TRUE); 395#else 396 int fd; 397 398 fd = g_open(arg, 0); 399 if (fd >= 0) { 400 g_close(fd); 401 return (B_TRUE); 402 } 403 return (B_FALSE); 404#endif 405} 406 407/* 408 * Create a leaf vdev. Determine if this is a file or a device. If it's a 409 * device, fill in the device id to make a complete nvlist. Valid forms for a 410 * leaf vdev are: 411 * 412 * /dev/dsk/xxx Complete disk path 413 * /xxx Full path to file 414 * xxx Shorthand for /dev/dsk/xxx 415 */ 416static nvlist_t * 417make_leaf_vdev(const char *arg, uint64_t is_log) 418{ 419 char path[MAXPATHLEN]; 420 struct stat64 statbuf; 421 nvlist_t *vdev = NULL; 422 char *type = NULL; 423 boolean_t wholedisk = B_FALSE; 424 425 /* 426 * Determine what type of vdev this is, and put the full path into 427 * 'path'. We detect whether this is a device of file afterwards by 428 * checking the st_mode of the file. 429 */ 430 if (arg[0] == '/') { 431 /* 432 * Complete device or file path. Exact type is determined by 433 * examining the file descriptor afterwards. 434 */ 435 wholedisk = is_whole_disk(arg); 436 if (!wholedisk && (stat64(arg, &statbuf) != 0)) { 437 (void) fprintf(stderr, 438 gettext("cannot open '%s': %s\n"), 439 arg, strerror(errno)); 440 return (NULL); 441 } 442 443 (void) strlcpy(path, arg, sizeof (path)); 444 } else { 445 /* 446 * This may be a short path for a device, or it could be total 447 * gibberish. Check to see if it's a known device in 448 * /dev/dsk/. As part of this check, see if we've been given a 449 * an entire disk (minus the slice number). 450 */ 451 if (strncmp(arg, _PATH_DEV, sizeof(_PATH_DEV) - 1) == 0) 452 strlcpy(path, arg, sizeof (path)); 453 else 454 snprintf(path, sizeof (path), "%s%s", _PATH_DEV, arg); 455 wholedisk = is_whole_disk(path); 456 if (!wholedisk && (stat64(path, &statbuf) != 0)) { 457 /* 458 * If we got ENOENT, then the user gave us 459 * gibberish, so try to direct them with a 460 * reasonable error message. Otherwise, 461 * regurgitate strerror() since it's the best we 462 * can do. 463 */ 464 if (errno == ENOENT) { 465 (void) fprintf(stderr, 466 gettext("cannot open '%s': no such " 467 "GEOM provider\n"), arg); 468 (void) fprintf(stderr, 469 gettext("must be a full path or " 470 "shorthand device name\n")); 471 return (NULL); 472 } else { 473 (void) fprintf(stderr, 474 gettext("cannot open '%s': %s\n"), 475 path, strerror(errno)); 476 return (NULL); 477 } 478 } 479 } 480 481#ifdef __FreeBSD__ 482 if (S_ISCHR(statbuf.st_mode)) { 483 statbuf.st_mode &= ~S_IFCHR; 484 statbuf.st_mode |= S_IFBLK; 485 wholedisk = B_FALSE; 486 } 487#endif 488 489 /* 490 * Determine whether this is a device or a file. 491 */ 492 if (wholedisk || S_ISBLK(statbuf.st_mode)) { 493 type = VDEV_TYPE_DISK; 494 } else if (S_ISREG(statbuf.st_mode)) { 495 type = VDEV_TYPE_FILE; 496 } else { 497 (void) fprintf(stderr, gettext("cannot use '%s': must be a " 498 "GEOM provider or regular file\n"), path); 499 return (NULL); 500 } 501 502 /* 503 * Finally, we have the complete device or file, and we know that it is 504 * acceptable to use. Construct the nvlist to describe this vdev. All 505 * vdevs have a 'path' element, and devices also have a 'devid' element. 506 */ 507 verify(nvlist_alloc(&vdev, NV_UNIQUE_NAME, 0) == 0); 508 verify(nvlist_add_string(vdev, ZPOOL_CONFIG_PATH, path) == 0); 509 verify(nvlist_add_string(vdev, ZPOOL_CONFIG_TYPE, type) == 0); 510 verify(nvlist_add_uint64(vdev, ZPOOL_CONFIG_IS_LOG, is_log) == 0); 511 if (strcmp(type, VDEV_TYPE_DISK) == 0) 512 verify(nvlist_add_uint64(vdev, ZPOOL_CONFIG_WHOLE_DISK, 513 (uint64_t)wholedisk) == 0); 514 515#ifdef have_devid 516 /* 517 * For a whole disk, defer getting its devid until after labeling it. 518 */ 519 if (S_ISBLK(statbuf.st_mode) && !wholedisk) { 520 /* 521 * Get the devid for the device. 522 */ 523 int fd; 524 ddi_devid_t devid; 525 char *minor = NULL, *devid_str = NULL; 526 527 if ((fd = open(path, O_RDONLY)) < 0) { 528 (void) fprintf(stderr, gettext("cannot open '%s': " 529 "%s\n"), path, strerror(errno)); 530 nvlist_free(vdev); 531 return (NULL); 532 } 533 534 if (devid_get(fd, &devid) == 0) { 535 if (devid_get_minor_name(fd, &minor) == 0 && 536 (devid_str = devid_str_encode(devid, minor)) != 537 NULL) { 538 verify(nvlist_add_string(vdev, 539 ZPOOL_CONFIG_DEVID, devid_str) == 0); 540 } 541 if (devid_str != NULL) 542 devid_str_free(devid_str); 543 if (minor != NULL) 544 devid_str_free(minor); 545 devid_free(devid); 546 } 547 548 (void) close(fd); 549 } 550#endif 551 552 return (vdev); 553} 554 555/* 556 * Go through and verify the replication level of the pool is consistent. 557 * Performs the following checks: 558 * 559 * For the new spec, verifies that devices in mirrors and raidz are the 560 * same size. 561 * 562 * If the current configuration already has inconsistent replication 563 * levels, ignore any other potential problems in the new spec. 564 * 565 * Otherwise, make sure that the current spec (if there is one) and the new 566 * spec have consistent replication levels. 567 */ 568typedef struct replication_level { 569 char *zprl_type; 570 uint64_t zprl_children; 571 uint64_t zprl_parity; 572} replication_level_t; 573 574#define ZPOOL_FUZZ (16 * 1024 * 1024) 575 576/* 577 * Given a list of toplevel vdevs, return the current replication level. If 578 * the config is inconsistent, then NULL is returned. If 'fatal' is set, then 579 * an error message will be displayed for each self-inconsistent vdev. 580 */ 581static replication_level_t * 582get_replication(nvlist_t *nvroot, boolean_t fatal) 583{ 584 nvlist_t **top; 585 uint_t t, toplevels; 586 nvlist_t **child; 587 uint_t c, children; 588 nvlist_t *nv; 589 char *type; 590 replication_level_t lastrep = {0}; 591 replication_level_t rep; 592 replication_level_t *ret; 593 boolean_t dontreport; 594 595 ret = safe_malloc(sizeof (replication_level_t)); 596 597 verify(nvlist_lookup_nvlist_array(nvroot, ZPOOL_CONFIG_CHILDREN, 598 &top, &toplevels) == 0); 599 600 for (t = 0; t < toplevels; t++) { 601 uint64_t is_log = B_FALSE; 602 603 nv = top[t]; 604 605 /* 606 * For separate logs we ignore the top level vdev replication 607 * constraints. 608 */ 609 (void) nvlist_lookup_uint64(nv, ZPOOL_CONFIG_IS_LOG, &is_log); 610 if (is_log) 611 continue; 612 613 verify(nvlist_lookup_string(nv, ZPOOL_CONFIG_TYPE, 614 &type) == 0); 615 if (nvlist_lookup_nvlist_array(nv, ZPOOL_CONFIG_CHILDREN, 616 &child, &children) != 0) { 617 /* 618 * This is a 'file' or 'disk' vdev. 619 */ 620 rep.zprl_type = type; 621 rep.zprl_children = 1; 622 rep.zprl_parity = 0; 623 } else { 624 uint64_t vdev_size; 625 626 /* 627 * This is a mirror or RAID-Z vdev. Go through and make 628 * sure the contents are all the same (files vs. disks), 629 * keeping track of the number of elements in the 630 * process. 631 * 632 * We also check that the size of each vdev (if it can 633 * be determined) is the same. 634 */ 635 rep.zprl_type = type; 636 rep.zprl_children = 0; 637 638 if (strcmp(type, VDEV_TYPE_RAIDZ) == 0) { 639 verify(nvlist_lookup_uint64(nv, 640 ZPOOL_CONFIG_NPARITY, 641 &rep.zprl_parity) == 0); 642 assert(rep.zprl_parity != 0); 643 } else { 644 rep.zprl_parity = 0; 645 } 646 647 /* 648 * The 'dontreport' variable indicates that we've 649 * already reported an error for this spec, so don't 650 * bother doing it again. 651 */ 652 type = NULL; 653 dontreport = 0; 654 vdev_size = -1ULL; 655 for (c = 0; c < children; c++) { 656 nvlist_t *cnv = child[c]; 657 char *path; 658 struct stat64 statbuf; 659 uint64_t size = -1ULL; 660 char *childtype; 661 int fd, err; 662 663 rep.zprl_children++; 664 665 verify(nvlist_lookup_string(cnv, 666 ZPOOL_CONFIG_TYPE, &childtype) == 0); 667 668 /* 669 * If this is a replacing or spare vdev, then 670 * get the real first child of the vdev. 671 */ 672 if (strcmp(childtype, 673 VDEV_TYPE_REPLACING) == 0 || 674 strcmp(childtype, VDEV_TYPE_SPARE) == 0) { 675 nvlist_t **rchild; 676 uint_t rchildren; 677 678 verify(nvlist_lookup_nvlist_array(cnv, 679 ZPOOL_CONFIG_CHILDREN, &rchild, 680 &rchildren) == 0); 681 assert(rchildren == 2); 682 cnv = rchild[0]; 683 684 verify(nvlist_lookup_string(cnv, 685 ZPOOL_CONFIG_TYPE, 686 &childtype) == 0); 687 if (strcmp(childtype, 688 VDEV_TYPE_SPARE) == 0) { 689 /* We have a replacing vdev with 690 * a spare child. Get the first 691 * real child of the spare 692 */ 693 verify( 694 nvlist_lookup_nvlist_array( 695 cnv, 696 ZPOOL_CONFIG_CHILDREN, 697 &rchild, 698 &rchildren) == 0); 699 assert(rchildren >= 2); 700 cnv = rchild[0]; 701 } 702 } 703 704 verify(nvlist_lookup_string(cnv, 705 ZPOOL_CONFIG_PATH, &path) == 0); 706 707 /* 708 * If we have a raidz/mirror that combines disks 709 * with files, report it as an error. 710 */ 711 if (!dontreport && type != NULL && 712 strcmp(type, childtype) != 0) { 713 if (ret != NULL) 714 free(ret); 715 ret = NULL; 716 if (fatal) 717 vdev_error(gettext( 718 "mismatched replication " 719 "level: %s contains both " 720 "files and devices\n"), 721 rep.zprl_type); 722 else 723 return (NULL); 724 dontreport = B_TRUE; 725 } 726 727 /* 728 * According to stat(2), the value of 'st_size' 729 * is undefined for block devices and character 730 * devices. But there is no effective way to 731 * determine the real size in userland. 732 * 733 * Instead, we'll take advantage of an 734 * implementation detail of spec_size(). If the 735 * device is currently open, then we (should) 736 * return a valid size. 737 * 738 * If we still don't get a valid size (indicated 739 * by a size of 0 or MAXOFFSET_T), then ignore 740 * this device altogether. 741 */ 742 if ((fd = open(path, O_RDONLY)) >= 0) { 743 err = fstat64(fd, &statbuf); 744 (void) close(fd); 745 } else { 746 err = stat64(path, &statbuf); 747 } 748 749 if (err != 0 || 750 statbuf.st_size == 0 || 751 statbuf.st_size == MAXOFFSET_T) 752 continue; 753 754 size = statbuf.st_size; 755 756 /* 757 * Also make sure that devices and 758 * slices have a consistent size. If 759 * they differ by a significant amount 760 * (~16MB) then report an error. 761 */ 762 if (!dontreport && 763 (vdev_size != -1ULL && 764 (labs(size - vdev_size) > 765 ZPOOL_FUZZ))) { 766 if (ret != NULL) 767 free(ret); 768 ret = NULL; 769 if (fatal) 770 vdev_error(gettext( 771 "%s contains devices of " 772 "different sizes\n"), 773 rep.zprl_type); 774 else 775 return (NULL); 776 dontreport = B_TRUE; 777 } 778 779 type = childtype; 780 vdev_size = size; 781 } 782 } 783 784 /* 785 * At this point, we have the replication of the last toplevel 786 * vdev in 'rep'. Compare it to 'lastrep' to see if its 787 * different. 788 */ 789 if (lastrep.zprl_type != NULL) { 790 if (strcmp(lastrep.zprl_type, rep.zprl_type) != 0) { 791 if (ret != NULL) 792 free(ret); 793 ret = NULL; 794 if (fatal) 795 vdev_error(gettext( 796 "mismatched replication level: " 797 "both %s and %s vdevs are " 798 "present\n"), 799 lastrep.zprl_type, rep.zprl_type); 800 else 801 return (NULL); 802 } else if (lastrep.zprl_parity != rep.zprl_parity) { 803 if (ret) 804 free(ret); 805 ret = NULL; 806 if (fatal) 807 vdev_error(gettext( 808 "mismatched replication level: " 809 "both %llu and %llu device parity " 810 "%s vdevs are present\n"), 811 lastrep.zprl_parity, 812 rep.zprl_parity, 813 rep.zprl_type); 814 else 815 return (NULL); 816 } else if (lastrep.zprl_children != rep.zprl_children) { 817 if (ret) 818 free(ret); 819 ret = NULL; 820 if (fatal) 821 vdev_error(gettext( 822 "mismatched replication level: " 823 "both %llu-way and %llu-way %s " 824 "vdevs are present\n"), 825 lastrep.zprl_children, 826 rep.zprl_children, 827 rep.zprl_type); 828 else 829 return (NULL); 830 } 831 } 832 lastrep = rep; 833 } 834 835 if (ret != NULL) 836 *ret = rep; 837 838 return (ret); 839} 840 841/* 842 * Check the replication level of the vdev spec against the current pool. Calls 843 * get_replication() to make sure the new spec is self-consistent. If the pool 844 * has a consistent replication level, then we ignore any errors. Otherwise, 845 * report any difference between the two. 846 */ 847static int 848check_replication(nvlist_t *config, nvlist_t *newroot) 849{ 850 nvlist_t **child; 851 uint_t children; 852 replication_level_t *current = NULL, *new; 853 int ret; 854 855 /* 856 * If we have a current pool configuration, check to see if it's 857 * self-consistent. If not, simply return success. 858 */ 859 if (config != NULL) { 860 nvlist_t *nvroot; 861 862 verify(nvlist_lookup_nvlist(config, ZPOOL_CONFIG_VDEV_TREE, 863 &nvroot) == 0); 864 if ((current = get_replication(nvroot, B_FALSE)) == NULL) 865 return (0); 866 } 867 /* 868 * for spares there may be no children, and therefore no 869 * replication level to check 870 */ 871 if ((nvlist_lookup_nvlist_array(newroot, ZPOOL_CONFIG_CHILDREN, 872 &child, &children) != 0) || (children == 0)) { 873 free(current); 874 return (0); 875 } 876 877 /* 878 * If all we have is logs then there's no replication level to check. 879 */ 880 if (num_logs(newroot) == children) { 881 free(current); 882 return (0); 883 } 884 885 /* 886 * Get the replication level of the new vdev spec, reporting any 887 * inconsistencies found. 888 */ 889 if ((new = get_replication(newroot, B_TRUE)) == NULL) { 890 free(current); 891 return (-1); 892 } 893 894 /* 895 * Check to see if the new vdev spec matches the replication level of 896 * the current pool. 897 */ 898 ret = 0; 899 if (current != NULL) { 900 if (strcmp(current->zprl_type, new->zprl_type) != 0) { 901 vdev_error(gettext( 902 "mismatched replication level: pool uses %s " 903 "and new vdev is %s\n"), 904 current->zprl_type, new->zprl_type); 905 ret = -1; 906 } else if (current->zprl_parity != new->zprl_parity) { 907 vdev_error(gettext( 908 "mismatched replication level: pool uses %llu " 909 "device parity and new vdev uses %llu\n"), 910 current->zprl_parity, new->zprl_parity); 911 ret = -1; 912 } else if (current->zprl_children != new->zprl_children) { 913 vdev_error(gettext( 914 "mismatched replication level: pool uses %llu-way " 915 "%s and new vdev uses %llu-way %s\n"), 916 current->zprl_children, current->zprl_type, 917 new->zprl_children, new->zprl_type); 918 ret = -1; 919 } 920 } 921 922 free(new); 923 if (current != NULL) 924 free(current); 925 926 return (ret); 927} 928 929#ifdef illumos 930/* 931 * Go through and find any whole disks in the vdev specification, labelling them 932 * as appropriate. When constructing the vdev spec, we were unable to open this 933 * device in order to provide a devid. Now that we have labelled the disk and 934 * know that slice 0 is valid, we can construct the devid now. 935 * 936 * If the disk was already labeled with an EFI label, we will have gotten the 937 * devid already (because we were able to open the whole disk). Otherwise, we 938 * need to get the devid after we label the disk. 939 */ 940static int 941make_disks(zpool_handle_t *zhp, nvlist_t *nv) 942{ 943 nvlist_t **child; 944 uint_t c, children; 945 char *type, *path, *diskname; 946 char buf[MAXPATHLEN]; 947 uint64_t wholedisk; 948 int fd; 949 int ret; 950 ddi_devid_t devid; 951 char *minor = NULL, *devid_str = NULL; 952 953 verify(nvlist_lookup_string(nv, ZPOOL_CONFIG_TYPE, &type) == 0); 954 955 if (nvlist_lookup_nvlist_array(nv, ZPOOL_CONFIG_CHILDREN, 956 &child, &children) != 0) { 957 958 if (strcmp(type, VDEV_TYPE_DISK) != 0) 959 return (0); 960 961 /* 962 * We have a disk device. Get the path to the device 963 * and see if it's a whole disk by appending the backup 964 * slice and stat()ing the device. 965 */ 966 verify(nvlist_lookup_string(nv, ZPOOL_CONFIG_PATH, &path) == 0); 967 if (nvlist_lookup_uint64(nv, ZPOOL_CONFIG_WHOLE_DISK, 968 &wholedisk) != 0 || !wholedisk) 969 return (0); 970 971 diskname = strrchr(path, '/'); 972 assert(diskname != NULL); 973 diskname++; 974 if (zpool_label_disk(g_zfs, zhp, diskname) == -1) 975 return (-1); 976 977 /* 978 * Fill in the devid, now that we've labeled the disk. 979 */ 980 (void) snprintf(buf, sizeof (buf), "%ss0", path); 981 if ((fd = open(buf, O_RDONLY)) < 0) { 982 (void) fprintf(stderr, 983 gettext("cannot open '%s': %s\n"), 984 buf, strerror(errno)); 985 return (-1); 986 } 987 988 if (devid_get(fd, &devid) == 0) { 989 if (devid_get_minor_name(fd, &minor) == 0 && 990 (devid_str = devid_str_encode(devid, minor)) != 991 NULL) { 992 verify(nvlist_add_string(nv, 993 ZPOOL_CONFIG_DEVID, devid_str) == 0); 994 } 995 if (devid_str != NULL) 996 devid_str_free(devid_str); 997 if (minor != NULL) 998 devid_str_free(minor); 999 devid_free(devid); 1000 } 1001 1002 /* 1003 * Update the path to refer to the 's0' slice. The presence of 1004 * the 'whole_disk' field indicates to the CLI that we should 1005 * chop off the slice number when displaying the device in 1006 * future output. 1007 */ 1008 verify(nvlist_add_string(nv, ZPOOL_CONFIG_PATH, buf) == 0); 1009 1010 (void) close(fd); 1011 1012 return (0); 1013 } 1014 1015 for (c = 0; c < children; c++) 1016 if ((ret = make_disks(zhp, child[c])) != 0) 1017 return (ret); 1018 1019 if (nvlist_lookup_nvlist_array(nv, ZPOOL_CONFIG_SPARES, 1020 &child, &children) == 0) 1021 for (c = 0; c < children; c++) 1022 if ((ret = make_disks(zhp, child[c])) != 0) 1023 return (ret); 1024 1025 if (nvlist_lookup_nvlist_array(nv, ZPOOL_CONFIG_L2CACHE, 1026 &child, &children) == 0) 1027 for (c = 0; c < children; c++) 1028 if ((ret = make_disks(zhp, child[c])) != 0) 1029 return (ret); 1030 1031 return (0); 1032} 1033#endif /* illumos */ 1034 1035/* 1036 * Determine if the given path is a hot spare within the given configuration. 1037 */ 1038static boolean_t 1039is_spare(nvlist_t *config, const char *path) 1040{ 1041 int fd; 1042 pool_state_t state; 1043 char *name = NULL; 1044 nvlist_t *label; 1045 uint64_t guid, spareguid; 1046 nvlist_t *nvroot; 1047 nvlist_t **spares; 1048 uint_t i, nspares; 1049 boolean_t inuse; 1050 1051 if ((fd = open(path, O_RDONLY)) < 0) 1052 return (B_FALSE); 1053 1054 if (zpool_in_use(g_zfs, fd, &state, &name, &inuse) != 0 || 1055 !inuse || 1056 state != POOL_STATE_SPARE || 1057 zpool_read_label(fd, &label) != 0) { 1058 free(name); 1059 (void) close(fd); 1060 return (B_FALSE); 1061 } 1062 free(name); 1063 (void) close(fd); 1064 1065 verify(nvlist_lookup_uint64(label, ZPOOL_CONFIG_GUID, &guid) == 0); 1066 nvlist_free(label); 1067 1068 verify(nvlist_lookup_nvlist(config, ZPOOL_CONFIG_VDEV_TREE, 1069 &nvroot) == 0); 1070 if (nvlist_lookup_nvlist_array(nvroot, ZPOOL_CONFIG_SPARES, 1071 &spares, &nspares) == 0) { 1072 for (i = 0; i < nspares; i++) { 1073 verify(nvlist_lookup_uint64(spares[i], 1074 ZPOOL_CONFIG_GUID, &spareguid) == 0); 1075 if (spareguid == guid) 1076 return (B_TRUE); 1077 } 1078 } 1079 1080 return (B_FALSE); 1081} 1082 1083/* 1084 * Go through and find any devices that are in use. We rely on libdiskmgt for 1085 * the majority of this task. 1086 */ 1087static boolean_t 1088is_device_in_use(nvlist_t *config, nvlist_t *nv, boolean_t force, 1089 boolean_t replacing, boolean_t isspare) 1090{ 1091 nvlist_t **child; 1092 uint_t c, children; 1093 char *type, *path; 1094 int ret = 0; 1095 char buf[MAXPATHLEN]; 1096 uint64_t wholedisk; 1097 boolean_t anyinuse = B_FALSE; 1098 1099 verify(nvlist_lookup_string(nv, ZPOOL_CONFIG_TYPE, &type) == 0); 1100 1101 if (nvlist_lookup_nvlist_array(nv, ZPOOL_CONFIG_CHILDREN, 1102 &child, &children) != 0) { 1103 1104 verify(nvlist_lookup_string(nv, ZPOOL_CONFIG_PATH, &path) == 0); 1105 1106 /* 1107 * As a generic check, we look to see if this is a replace of a 1108 * hot spare within the same pool. If so, we allow it 1109 * regardless of what libdiskmgt or zpool_in_use() says. 1110 */ 1111 if (replacing) { 1112#ifdef illumos 1113 if (nvlist_lookup_uint64(nv, ZPOOL_CONFIG_WHOLE_DISK, 1114 &wholedisk) == 0 && wholedisk) 1115 (void) snprintf(buf, sizeof (buf), "%ss0", 1116 path); 1117 else 1118#endif 1119 (void) strlcpy(buf, path, sizeof (buf)); 1120 1121 if (is_spare(config, buf)) 1122 return (B_FALSE); 1123 } 1124 1125 if (strcmp(type, VDEV_TYPE_DISK) == 0) 1126 ret = check_device(path, force, isspare); 1127 else if (strcmp(type, VDEV_TYPE_FILE) == 0) 1128 ret = check_file(path, force, isspare); 1129 1130 return (ret != 0); 1131 } 1132 1133 for (c = 0; c < children; c++) 1134 if (is_device_in_use(config, child[c], force, replacing, 1135 B_FALSE)) 1136 anyinuse = B_TRUE; 1137 1138 if (nvlist_lookup_nvlist_array(nv, ZPOOL_CONFIG_SPARES, 1139 &child, &children) == 0) 1140 for (c = 0; c < children; c++) 1141 if (is_device_in_use(config, child[c], force, replacing, 1142 B_TRUE)) 1143 anyinuse = B_TRUE; 1144 1145 if (nvlist_lookup_nvlist_array(nv, ZPOOL_CONFIG_L2CACHE, 1146 &child, &children) == 0) 1147 for (c = 0; c < children; c++) 1148 if (is_device_in_use(config, child[c], force, replacing, 1149 B_FALSE)) 1150 anyinuse = B_TRUE; 1151 1152 return (anyinuse); 1153} 1154 1155static const char * 1156is_grouping(const char *type, int *mindev, int *maxdev) 1157{ 1158 if (strncmp(type, "raidz", 5) == 0) { 1159 const char *p = type + 5; 1160 char *end; 1161 long nparity; 1162 1163 if (*p == '\0') { 1164 nparity = 1; 1165 } else if (*p == '0') { 1166 return (NULL); /* no zero prefixes allowed */ 1167 } else { 1168 errno = 0; 1169 nparity = strtol(p, &end, 10); 1170 if (errno != 0 || nparity < 1 || nparity >= 255 || 1171 *end != '\0') 1172 return (NULL); 1173 } 1174 1175 if (mindev != NULL) 1176 *mindev = nparity + 1; 1177 if (maxdev != NULL) 1178 *maxdev = 255; 1179 return (VDEV_TYPE_RAIDZ); 1180 } 1181 1182 if (maxdev != NULL) 1183 *maxdev = INT_MAX; 1184 1185 if (strcmp(type, "mirror") == 0) { 1186 if (mindev != NULL) 1187 *mindev = 2; 1188 return (VDEV_TYPE_MIRROR); 1189 } 1190 1191 if (strcmp(type, "spare") == 0) { 1192 if (mindev != NULL) 1193 *mindev = 1; 1194 return (VDEV_TYPE_SPARE); 1195 } 1196 1197 if (strcmp(type, "log") == 0) { 1198 if (mindev != NULL) 1199 *mindev = 1; 1200 return (VDEV_TYPE_LOG); 1201 } 1202 1203 if (strcmp(type, "cache") == 0) { 1204 if (mindev != NULL) 1205 *mindev = 1; 1206 return (VDEV_TYPE_L2CACHE); 1207 } 1208 1209 return (NULL); 1210} 1211 1212/* 1213 * Construct a syntactically valid vdev specification, 1214 * and ensure that all devices and files exist and can be opened. 1215 * Note: we don't bother freeing anything in the error paths 1216 * because the program is just going to exit anyway. 1217 */ 1218nvlist_t * 1219construct_spec(int argc, char **argv) 1220{ 1221 nvlist_t *nvroot, *nv, **top, **spares, **l2cache; 1222 int t, toplevels, mindev, maxdev, nspares, nlogs, nl2cache; 1223 const char *type; 1224 uint64_t is_log; 1225 boolean_t seen_logs; 1226 1227 top = NULL; 1228 toplevels = 0; 1229 spares = NULL; 1230 l2cache = NULL; 1231 nspares = 0; 1232 nlogs = 0; 1233 nl2cache = 0; 1234 is_log = B_FALSE; 1235 seen_logs = B_FALSE; 1236 1237 while (argc > 0) { 1238 nv = NULL; 1239 1240 /* 1241 * If it's a mirror or raidz, the subsequent arguments are 1242 * its leaves -- until we encounter the next mirror or raidz. 1243 */ 1244 if ((type = is_grouping(argv[0], &mindev, &maxdev)) != NULL) { 1245 nvlist_t **child = NULL; 1246 int c, children = 0; 1247 1248 if (strcmp(type, VDEV_TYPE_SPARE) == 0) { 1249 if (spares != NULL) { 1250 (void) fprintf(stderr, 1251 gettext("invalid vdev " 1252 "specification: 'spare' can be " 1253 "specified only once\n")); 1254 return (NULL); 1255 } 1256 is_log = B_FALSE; 1257 } 1258 1259 if (strcmp(type, VDEV_TYPE_LOG) == 0) { 1260 if (seen_logs) { 1261 (void) fprintf(stderr, 1262 gettext("invalid vdev " 1263 "specification: 'log' can be " 1264 "specified only once\n")); 1265 return (NULL); 1266 } 1267 seen_logs = B_TRUE; 1268 is_log = B_TRUE; 1269 argc--; 1270 argv++; 1271 /* 1272 * A log is not a real grouping device. 1273 * We just set is_log and continue. 1274 */ 1275 continue; 1276 } 1277 1278 if (strcmp(type, VDEV_TYPE_L2CACHE) == 0) { 1279 if (l2cache != NULL) { 1280 (void) fprintf(stderr, 1281 gettext("invalid vdev " 1282 "specification: 'cache' can be " 1283 "specified only once\n")); 1284 return (NULL); 1285 } 1286 is_log = B_FALSE; 1287 } 1288 1289 if (is_log) { 1290 if (strcmp(type, VDEV_TYPE_MIRROR) != 0) { 1291 (void) fprintf(stderr, 1292 gettext("invalid vdev " 1293 "specification: unsupported 'log' " 1294 "device: %s\n"), type); 1295 return (NULL); 1296 } 1297 nlogs++; 1298 } 1299 1300 for (c = 1; c < argc; c++) { 1301 if (is_grouping(argv[c], NULL, NULL) != NULL) 1302 break; 1303 children++; 1304 child = realloc(child, 1305 children * sizeof (nvlist_t *)); 1306 if (child == NULL) 1307 zpool_no_memory(); 1308 if ((nv = make_leaf_vdev(argv[c], B_FALSE)) 1309 == NULL) 1310 return (NULL); 1311 child[children - 1] = nv; 1312 } 1313 1314 if (children < mindev) { 1315 (void) fprintf(stderr, gettext("invalid vdev " 1316 "specification: %s requires at least %d " 1317 "devices\n"), argv[0], mindev); 1318 return (NULL); 1319 } 1320 1321 if (children > maxdev) { 1322 (void) fprintf(stderr, gettext("invalid vdev " 1323 "specification: %s supports no more than " 1324 "%d devices\n"), argv[0], maxdev); 1325 return (NULL); 1326 } 1327 1328 argc -= c; 1329 argv += c; 1330 1331 if (strcmp(type, VDEV_TYPE_SPARE) == 0) { 1332 spares = child; 1333 nspares = children; 1334 continue; 1335 } else if (strcmp(type, VDEV_TYPE_L2CACHE) == 0) { 1336 l2cache = child; 1337 nl2cache = children; 1338 continue; 1339 } else { 1340 verify(nvlist_alloc(&nv, NV_UNIQUE_NAME, 1341 0) == 0); 1342 verify(nvlist_add_string(nv, ZPOOL_CONFIG_TYPE, 1343 type) == 0); 1344 verify(nvlist_add_uint64(nv, 1345 ZPOOL_CONFIG_IS_LOG, is_log) == 0); 1346 if (strcmp(type, VDEV_TYPE_RAIDZ) == 0) { 1347 verify(nvlist_add_uint64(nv, 1348 ZPOOL_CONFIG_NPARITY, 1349 mindev - 1) == 0); 1350 } 1351 verify(nvlist_add_nvlist_array(nv, 1352 ZPOOL_CONFIG_CHILDREN, child, 1353 children) == 0); 1354 1355 for (c = 0; c < children; c++) 1356 nvlist_free(child[c]); 1357 free(child); 1358 } 1359 } else { 1360 /* 1361 * We have a device. Pass off to make_leaf_vdev() to 1362 * construct the appropriate nvlist describing the vdev. 1363 */ 1364 if ((nv = make_leaf_vdev(argv[0], is_log)) == NULL) 1365 return (NULL); 1366 if (is_log) 1367 nlogs++; 1368 argc--; 1369 argv++; 1370 } 1371 1372 toplevels++; 1373 top = realloc(top, toplevels * sizeof (nvlist_t *)); 1374 if (top == NULL) 1375 zpool_no_memory(); 1376 top[toplevels - 1] = nv; 1377 } 1378 1379 if (toplevels == 0 && nspares == 0 && nl2cache == 0) { 1380 (void) fprintf(stderr, gettext("invalid vdev " 1381 "specification: at least one toplevel vdev must be " 1382 "specified\n")); 1383 return (NULL); 1384 } 1385 1386 if (seen_logs && nlogs == 0) { 1387 (void) fprintf(stderr, gettext("invalid vdev specification: " 1388 "log requires at least 1 device\n")); 1389 return (NULL); 1390 } 1391 1392 /* 1393 * Finally, create nvroot and add all top-level vdevs to it. 1394 */ 1395 verify(nvlist_alloc(&nvroot, NV_UNIQUE_NAME, 0) == 0); 1396 verify(nvlist_add_string(nvroot, ZPOOL_CONFIG_TYPE, 1397 VDEV_TYPE_ROOT) == 0); 1398 verify(nvlist_add_nvlist_array(nvroot, ZPOOL_CONFIG_CHILDREN, 1399 top, toplevels) == 0); 1400 if (nspares != 0) 1401 verify(nvlist_add_nvlist_array(nvroot, ZPOOL_CONFIG_SPARES, 1402 spares, nspares) == 0); 1403 if (nl2cache != 0) 1404 verify(nvlist_add_nvlist_array(nvroot, ZPOOL_CONFIG_L2CACHE, 1405 l2cache, nl2cache) == 0); 1406 1407 for (t = 0; t < toplevels; t++) 1408 nvlist_free(top[t]); 1409 for (t = 0; t < nspares; t++) 1410 nvlist_free(spares[t]); 1411 for (t = 0; t < nl2cache; t++) 1412 nvlist_free(l2cache[t]); 1413 if (spares) 1414 free(spares); 1415 if (l2cache) 1416 free(l2cache); 1417 free(top); 1418 1419 return (nvroot); 1420} 1421 1422nvlist_t * 1423split_mirror_vdev(zpool_handle_t *zhp, char *newname, nvlist_t *props, 1424 splitflags_t flags, int argc, char **argv) 1425{ 1426 nvlist_t *newroot = NULL, **child; 1427 uint_t c, children; 1428 1429 if (argc > 0) { 1430 if ((newroot = construct_spec(argc, argv)) == NULL) { 1431 (void) fprintf(stderr, gettext("Unable to build a " 1432 "pool from the specified devices\n")); 1433 return (NULL); 1434 } 1435 1436#ifdef illumos 1437 if (!flags.dryrun && make_disks(zhp, newroot) != 0) { 1438 nvlist_free(newroot); 1439 return (NULL); 1440 } 1441#endif 1442 1443 /* avoid any tricks in the spec */ 1444 verify(nvlist_lookup_nvlist_array(newroot, 1445 ZPOOL_CONFIG_CHILDREN, &child, &children) == 0); 1446 for (c = 0; c < children; c++) { 1447 char *path; 1448 const char *type; 1449 int min, max; 1450 1451 verify(nvlist_lookup_string(child[c], 1452 ZPOOL_CONFIG_PATH, &path) == 0); 1453 if ((type = is_grouping(path, &min, &max)) != NULL) { 1454 (void) fprintf(stderr, gettext("Cannot use " 1455 "'%s' as a device for splitting\n"), type); 1456 nvlist_free(newroot); 1457 return (NULL); 1458 } 1459 } 1460 } 1461 1462 if (zpool_vdev_split(zhp, newname, &newroot, props, flags) != 0) { 1463 nvlist_free(newroot); 1464 return (NULL); 1465 } 1466 1467 return (newroot); 1468} 1469 1470/* 1471 * Get and validate the contents of the given vdev specification. This ensures 1472 * that the nvlist returned is well-formed, that all the devices exist, and that 1473 * they are not currently in use by any other known consumer. The 'poolconfig' 1474 * parameter is the current configuration of the pool when adding devices 1475 * existing pool, and is used to perform additional checks, such as changing the 1476 * replication level of the pool. It can be 'NULL' to indicate that this is a 1477 * new pool. The 'force' flag controls whether devices should be forcefully 1478 * added, even if they appear in use. 1479 */ 1480nvlist_t * 1481make_root_vdev(zpool_handle_t *zhp, int force, int check_rep, 1482 boolean_t replacing, boolean_t dryrun, int argc, char **argv) 1483{ 1484 nvlist_t *newroot; 1485 nvlist_t *poolconfig = NULL; 1486 is_force = force; 1487 1488 /* 1489 * Construct the vdev specification. If this is successful, we know 1490 * that we have a valid specification, and that all devices can be 1491 * opened. 1492 */ 1493 if ((newroot = construct_spec(argc, argv)) == NULL) 1494 return (NULL); 1495 1496 if (zhp && ((poolconfig = zpool_get_config(zhp, NULL)) == NULL)) 1497 return (NULL); 1498 1499 /* 1500 * Validate each device to make sure that its not shared with another 1501 * subsystem. We do this even if 'force' is set, because there are some 1502 * uses (such as a dedicated dump device) that even '-f' cannot 1503 * override. 1504 */ 1505 if (is_device_in_use(poolconfig, newroot, force, replacing, B_FALSE)) { 1506 nvlist_free(newroot); 1507 return (NULL); 1508 } 1509 1510 /* 1511 * Check the replication level of the given vdevs and report any errors 1512 * found. We include the existing pool spec, if any, as we need to 1513 * catch changes against the existing replication level. 1514 */ 1515 if (check_rep && check_replication(poolconfig, newroot) != 0) { 1516 nvlist_free(newroot); 1517 return (NULL); 1518 } 1519 1520#ifdef illumos 1521 /* 1522 * Run through the vdev specification and label any whole disks found. 1523 */ 1524 if (!dryrun && make_disks(zhp, newroot) != 0) { 1525 nvlist_free(newroot); 1526 return (NULL); 1527 } 1528#endif 1529 1530 return (newroot); 1531} 1532