1/* 2 * CDDL HEADER START 3 * 4 * The contents of this file are subject to the terms of the 5 * Common Development and Distribution License (the "License"). 6 * You may not use this file except in compliance with the License. 7 * 8 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE 9 * or http://www.opensolaris.org/os/licensing. 10 * See the License for the specific language governing permissions 11 * and limitations under the License. 12 * 13 * When distributing Covered Code, include this CDDL HEADER in each 14 * file and include the License file at usr/src/OPENSOLARIS.LICENSE. 15 * If applicable, add the following below this CDDL HEADER, with the 16 * fields enclosed by brackets "[]" replaced with your own identifying 17 * information: Portions Copyright [yyyy] [name of copyright owner] 18 * 19 * CDDL HEADER END 20 */ 21 22/* 23 * Copyright 2007 Sun Microsystems, Inc. All rights reserved. 24 * Use is subject to license terms. 25 */ 26 27#ifndef _SYS_DTRACE_H 28#define _SYS_DTRACE_H 29 30/* #pragma ident "@(#)dtrace.h 1.37 07/06/05 SMI" */ 31 32#ifdef __cplusplus 33extern "C" { 34#endif 35 36/* 37 * DTrace Dynamic Tracing Software: Kernel Interfaces 38 * 39 * Note: The contents of this file are private to the implementation of the 40 * Solaris system and DTrace subsystem and are subject to change at any time 41 * without notice. Applications and drivers using these interfaces will fail 42 * to run on future releases. These interfaces should not be used for any 43 * purpose except those expressly outlined in dtrace(7D) and libdtrace(3LIB). 44 * Please refer to the "Solaris Dynamic Tracing Guide" for more information. 45 */ 46 47#ifndef _ASM 48 49#if !defined(__APPLE__) 50#include <sys/types.h> 51#include <sys/modctl.h> 52#include <sys/processor.h> 53#include <sys/systm.h> 54#include <sys/ctf_api.h> 55#include <sys/cyclic.h> 56#include <sys/int_limits.h> 57#else /* is Apple Mac OS X */ 58 59#if defined(__LP64__) 60#if !defined(_LP64) 61#define _LP64 /* Solaris vs. Darwin */ 62#endif 63#else 64#if !defined(_ILP32) 65#define _ILP32 /* Solaris vs. Darwin */ 66#endif 67#endif 68 69#ifdef KERNEL 70#ifndef _KERNEL 71#define _KERNEL /* Solaris vs. Darwin */ 72#endif 73#endif 74 75#if defined(__BIG_ENDIAN__) 76#if !defined(_BIG_ENDIAN) 77#define _BIG_ENDIAN /* Solaris vs. Darwin */ 78#endif 79#elif defined(__LITTLE_ENDIAN__) 80#if !defined(_LITTLE_ENDIAN) 81#define _LITTLE_ENDIAN /* Solaris vs. Darwin */ 82#endif 83#else 84#error Unknown endian-ness 85#endif 86 87#include <sys/types.h> 88#include <stdint.h> 89 90#ifndef NULL 91#define NULL ((void *)0) /* quiets many warnings */ 92#endif 93 94#define SEC 1 95#define MILLISEC 1000 96#define MICROSEC 1000000 97#define NANOSEC 1000000000 98 99#define S_ROUND(x, a) ((x) + (((a) ? (a) : 1) - 1) & ~(((a) ? (a) : 1) - 1)) 100#define P2ROUNDUP(x, align) (-(-(x) & -(align))) 101 102#define CTF_MODEL_ILP32 1 /* object data model is ILP32 */ 103#define CTF_MODEL_LP64 2 /* object data model is LP64 */ 104#ifdef __LP64__ 105#define CTF_MODEL_NATIVE CTF_MODEL_LP64 106#else 107#define CTF_MODEL_NATIVE CTF_MODEL_ILP32 108#endif 109 110typedef uint8_t uchar_t; 111typedef uint16_t ushort_t; 112typedef uint32_t uint_t; 113typedef unsigned long ulong_t; 114typedef uint64_t u_longlong_t; 115typedef int64_t longlong_t; 116typedef int64_t off64_t; 117typedef int processorid_t; 118typedef int64_t hrtime_t; 119 120typedef enum { B_FALSE = 0, B_TRUE = 1 } _dtrace_boolean; 121 122typedef uint8_t UUID[16]; /* For modctl use in dtrace.h */ 123 124struct modctl; /* In lieu of Solaris <sys/modctl.h> */ 125/* NOTHING */ /* In lieu of Solaris <sys/processor.h> */ 126#include <sys/ioctl.h> /* In lieu of Solaris <sys/systm.h> */ 127#ifdef KERNEL 128/* NOTHING */ /* In lieu of Solaris <sys/ctf_api.h> */ 129#else 130/* In lieu of Solaris <sys/ctf_api.h> */ 131typedef struct ctf_file ctf_file_t; 132typedef long ctf_id_t; 133#endif 134/* NOTHING */ /* In lieu of Solaris <sys/cyclic.h> */ 135/* NOTHING */ /* In lieu of Solaris <sys/int_limits.h> */ 136 137typedef uint32_t zoneid_t; 138 139#include <sys/dtrace_glue.h> 140 141#include <stdarg.h> 142typedef va_list __va_list; 143 144/* Solaris proc_t is the struct. Darwin's proc_t is a pointer to it. */ 145#define proc_t struct proc /* Steer clear of the Darwin typedef for proc_t */ 146#endif /* __APPLE__ */ 147 148/* 149 * DTrace Universal Constants and Typedefs 150 */ 151#define DTRACE_CPUALL -1 /* all CPUs */ 152#define DTRACE_IDNONE 0 /* invalid probe identifier */ 153#define DTRACE_EPIDNONE 0 /* invalid enabled probe identifier */ 154#define DTRACE_AGGIDNONE 0 /* invalid aggregation identifier */ 155#define DTRACE_AGGVARIDNONE 0 /* invalid aggregation variable ID */ 156#define DTRACE_CACHEIDNONE 0 /* invalid predicate cache */ 157#define DTRACE_PROVNONE 0 /* invalid provider identifier */ 158#define DTRACE_METAPROVNONE 0 /* invalid meta-provider identifier */ 159#define DTRACE_ARGNONE -1 /* invalid argument index */ 160 161#define DTRACE_PROVNAMELEN 64 162#define DTRACE_MODNAMELEN 64 163#define DTRACE_FUNCNAMELEN 128 164#define DTRACE_NAMELEN 64 165#define DTRACE_FULLNAMELEN (DTRACE_PROVNAMELEN + DTRACE_MODNAMELEN + \ 166 DTRACE_FUNCNAMELEN + DTRACE_NAMELEN + 4) 167#define DTRACE_ARGTYPELEN 128 168 169typedef uint32_t dtrace_id_t; /* probe identifier */ 170typedef uint32_t dtrace_epid_t; /* enabled probe identifier */ 171typedef uint32_t dtrace_aggid_t; /* aggregation identifier */ 172typedef int64_t dtrace_aggvarid_t; /* aggregation variable identifier */ 173typedef uint16_t dtrace_actkind_t; /* action kind */ 174typedef int64_t dtrace_optval_t; /* option value */ 175typedef uint32_t dtrace_cacheid_t; /* predicate cache identifier */ 176 177typedef enum dtrace_probespec { 178 DTRACE_PROBESPEC_NONE = -1, 179 DTRACE_PROBESPEC_PROVIDER = 0, 180 DTRACE_PROBESPEC_MOD, 181 DTRACE_PROBESPEC_FUNC, 182 DTRACE_PROBESPEC_NAME 183} dtrace_probespec_t; 184 185/* 186 * DTrace Intermediate Format (DIF) 187 * 188 * The following definitions describe the DTrace Intermediate Format (DIF), a 189 * a RISC-like instruction set and program encoding used to represent 190 * predicates and actions that can be bound to DTrace probes. The constants 191 * below defining the number of available registers are suggested minimums; the 192 * compiler should use DTRACEIOC_CONF to dynamically obtain the number of 193 * registers provided by the current DTrace implementation. 194 */ 195#define DIF_VERSION_1 1 /* DIF version 1: Solaris 10 Beta */ 196#define DIF_VERSION_2 2 /* DIF version 2: Solaris 10 FCS */ 197#define DIF_VERSION DIF_VERSION_2 /* latest DIF instruction set version */ 198#define DIF_DIR_NREGS 8 /* number of DIF integer registers */ 199#define DIF_DTR_NREGS 8 /* number of DIF tuple registers */ 200 201#define DIF_OP_OR 1 /* or r1, r2, rd */ 202#define DIF_OP_XOR 2 /* xor r1, r2, rd */ 203#define DIF_OP_AND 3 /* and r1, r2, rd */ 204#define DIF_OP_SLL 4 /* sll r1, r2, rd */ 205#define DIF_OP_SRL 5 /* srl r1, r2, rd */ 206#define DIF_OP_SUB 6 /* sub r1, r2, rd */ 207#define DIF_OP_ADD 7 /* add r1, r2, rd */ 208#define DIF_OP_MUL 8 /* mul r1, r2, rd */ 209#define DIF_OP_SDIV 9 /* sdiv r1, r2, rd */ 210#define DIF_OP_UDIV 10 /* udiv r1, r2, rd */ 211#define DIF_OP_SREM 11 /* srem r1, r2, rd */ 212#define DIF_OP_UREM 12 /* urem r1, r2, rd */ 213#define DIF_OP_NOT 13 /* not r1, rd */ 214#define DIF_OP_MOV 14 /* mov r1, rd */ 215#define DIF_OP_CMP 15 /* cmp r1, r2 */ 216#define DIF_OP_TST 16 /* tst r1 */ 217#define DIF_OP_BA 17 /* ba label */ 218#define DIF_OP_BE 18 /* be label */ 219#define DIF_OP_BNE 19 /* bne label */ 220#define DIF_OP_BG 20 /* bg label */ 221#define DIF_OP_BGU 21 /* bgu label */ 222#define DIF_OP_BGE 22 /* bge label */ 223#define DIF_OP_BGEU 23 /* bgeu label */ 224#define DIF_OP_BL 24 /* bl label */ 225#define DIF_OP_BLU 25 /* blu label */ 226#define DIF_OP_BLE 26 /* ble label */ 227#define DIF_OP_BLEU 27 /* bleu label */ 228#define DIF_OP_LDSB 28 /* ldsb [r1], rd */ 229#define DIF_OP_LDSH 29 /* ldsh [r1], rd */ 230#define DIF_OP_LDSW 30 /* ldsw [r1], rd */ 231#define DIF_OP_LDUB 31 /* ldub [r1], rd */ 232#define DIF_OP_LDUH 32 /* lduh [r1], rd */ 233#define DIF_OP_LDUW 33 /* lduw [r1], rd */ 234#define DIF_OP_LDX 34 /* ldx [r1], rd */ 235#define DIF_OP_RET 35 /* ret rd */ 236#define DIF_OP_NOP 36 /* nop */ 237#define DIF_OP_SETX 37 /* setx intindex, rd */ 238#define DIF_OP_SETS 38 /* sets strindex, rd */ 239#define DIF_OP_SCMP 39 /* scmp r1, r2 */ 240#define DIF_OP_LDGA 40 /* ldga var, ri, rd */ 241#define DIF_OP_LDGS 41 /* ldgs var, rd */ 242#define DIF_OP_STGS 42 /* stgs var, rs */ 243#define DIF_OP_LDTA 43 /* ldta var, ri, rd */ 244#define DIF_OP_LDTS 44 /* ldts var, rd */ 245#define DIF_OP_STTS 45 /* stts var, rs */ 246#define DIF_OP_SRA 46 /* sra r1, r2, rd */ 247#define DIF_OP_CALL 47 /* call subr, rd */ 248#define DIF_OP_PUSHTR 48 /* pushtr type, rs, rr */ 249#define DIF_OP_PUSHTV 49 /* pushtv type, rs, rv */ 250#define DIF_OP_POPTS 50 /* popts */ 251#define DIF_OP_FLUSHTS 51 /* flushts */ 252#define DIF_OP_LDGAA 52 /* ldgaa var, rd */ 253#define DIF_OP_LDTAA 53 /* ldtaa var, rd */ 254#define DIF_OP_STGAA 54 /* stgaa var, rs */ 255#define DIF_OP_STTAA 55 /* sttaa var, rs */ 256#define DIF_OP_LDLS 56 /* ldls var, rd */ 257#define DIF_OP_STLS 57 /* stls var, rs */ 258#define DIF_OP_ALLOCS 58 /* allocs r1, rd */ 259#define DIF_OP_COPYS 59 /* copys r1, r2, rd */ 260#define DIF_OP_STB 60 /* stb r1, [rd] */ 261#define DIF_OP_STH 61 /* sth r1, [rd] */ 262#define DIF_OP_STW 62 /* stw r1, [rd] */ 263#define DIF_OP_STX 63 /* stx r1, [rd] */ 264#define DIF_OP_ULDSB 64 /* uldsb [r1], rd */ 265#define DIF_OP_ULDSH 65 /* uldsh [r1], rd */ 266#define DIF_OP_ULDSW 66 /* uldsw [r1], rd */ 267#define DIF_OP_ULDUB 67 /* uldub [r1], rd */ 268#define DIF_OP_ULDUH 68 /* ulduh [r1], rd */ 269#define DIF_OP_ULDUW 69 /* ulduw [r1], rd */ 270#define DIF_OP_ULDX 70 /* uldx [r1], rd */ 271#define DIF_OP_RLDSB 71 /* rldsb [r1], rd */ 272#define DIF_OP_RLDSH 72 /* rldsh [r1], rd */ 273#define DIF_OP_RLDSW 73 /* rldsw [r1], rd */ 274#define DIF_OP_RLDUB 74 /* rldub [r1], rd */ 275#define DIF_OP_RLDUH 75 /* rlduh [r1], rd */ 276#define DIF_OP_RLDUW 76 /* rlduw [r1], rd */ 277#define DIF_OP_RLDX 77 /* rldx [r1], rd */ 278#define DIF_OP_XLATE 78 /* xlate xlrindex, rd */ 279#define DIF_OP_XLARG 79 /* xlarg xlrindex, rd */ 280 281#define DIF_INTOFF_MAX 0xffff /* highest integer table offset */ 282#define DIF_STROFF_MAX 0xffff /* highest string table offset */ 283#define DIF_REGISTER_MAX 0xff /* highest register number */ 284#define DIF_VARIABLE_MAX 0xffff /* highest variable identifier */ 285#define DIF_SUBROUTINE_MAX 0xffff /* highest subroutine code */ 286 287#define DIF_VAR_ARRAY_MIN 0x0000 /* lowest numbered array variable */ 288#define DIF_VAR_ARRAY_UBASE 0x0080 /* lowest user-defined array */ 289#define DIF_VAR_ARRAY_MAX 0x00ff /* highest numbered array variable */ 290 291#define DIF_VAR_OTHER_MIN 0x0100 /* lowest numbered scalar or assc */ 292#define DIF_VAR_OTHER_UBASE 0x0500 /* lowest user-defined scalar or assc */ 293#define DIF_VAR_OTHER_MAX 0xffff /* highest numbered scalar or assc */ 294 295#define DIF_VAR_ARGS 0x0000 /* arguments array */ 296#define DIF_VAR_REGS 0x0001 /* registers array */ 297#define DIF_VAR_UREGS 0x0002 /* user registers array */ 298#define DIF_VAR_CURTHREAD 0x0100 /* thread pointer */ 299#define DIF_VAR_TIMESTAMP 0x0101 /* timestamp */ 300#define DIF_VAR_VTIMESTAMP 0x0102 /* virtual timestamp */ 301#define DIF_VAR_IPL 0x0103 /* interrupt priority level */ 302#define DIF_VAR_EPID 0x0104 /* enabled probe ID */ 303#define DIF_VAR_ID 0x0105 /* probe ID */ 304#define DIF_VAR_ARG0 0x0106 /* first argument */ 305#define DIF_VAR_ARG1 0x0107 /* second argument */ 306#define DIF_VAR_ARG2 0x0108 /* third argument */ 307#define DIF_VAR_ARG3 0x0109 /* fourth argument */ 308#define DIF_VAR_ARG4 0x010a /* fifth argument */ 309#define DIF_VAR_ARG5 0x010b /* sixth argument */ 310#define DIF_VAR_ARG6 0x010c /* seventh argument */ 311#define DIF_VAR_ARG7 0x010d /* eighth argument */ 312#define DIF_VAR_ARG8 0x010e /* ninth argument */ 313#define DIF_VAR_ARG9 0x010f /* tenth argument */ 314#define DIF_VAR_STACKDEPTH 0x0110 /* stack depth */ 315#define DIF_VAR_CALLER 0x0111 /* caller */ 316#define DIF_VAR_PROBEPROV 0x0112 /* probe provider */ 317#define DIF_VAR_PROBEMOD 0x0113 /* probe module */ 318#define DIF_VAR_PROBEFUNC 0x0114 /* probe function */ 319#define DIF_VAR_PROBENAME 0x0115 /* probe name */ 320#define DIF_VAR_PID 0x0116 /* process ID */ 321#define DIF_VAR_TID 0x0117 /* (per-process) thread ID */ 322#define DIF_VAR_EXECNAME 0x0118 /* name of executable */ 323#define DIF_VAR_ZONENAME 0x0119 /* zone name associated with process */ 324#define DIF_VAR_WALLTIMESTAMP 0x011a /* wall-clock timestamp */ 325#define DIF_VAR_USTACKDEPTH 0x011b /* user-land stack depth */ 326#define DIF_VAR_UCALLER 0x011c /* user-level caller */ 327#define DIF_VAR_PPID 0x011d /* parent process ID */ 328#define DIF_VAR_UID 0x011e /* process user ID */ 329#define DIF_VAR_GID 0x011f /* process group ID */ 330#define DIF_VAR_ERRNO 0x0120 /* thread errno */ 331#if defined(__APPLE__) 332#define DIF_VAR_PTHREAD_SELF 0x0200 /* Apple specific PTHREAD_SELF (Not currently supported!) */ 333#define DIF_VAR_DISPATCHQADDR 0x0201 /* Apple specific dispatch queue addr */ 334#endif /* __APPLE __ */ 335 336#define DIF_SUBR_RAND 0 337#define DIF_SUBR_MUTEX_OWNED 1 338#define DIF_SUBR_MUTEX_OWNER 2 339#define DIF_SUBR_MUTEX_TYPE_ADAPTIVE 3 340#define DIF_SUBR_MUTEX_TYPE_SPIN 4 341#define DIF_SUBR_RW_READ_HELD 5 342#define DIF_SUBR_RW_WRITE_HELD 6 343#define DIF_SUBR_RW_ISWRITER 7 344#define DIF_SUBR_COPYIN 8 345#define DIF_SUBR_COPYINSTR 9 346#define DIF_SUBR_SPECULATION 10 347#define DIF_SUBR_PROGENYOF 11 348#define DIF_SUBR_STRLEN 12 349#define DIF_SUBR_COPYOUT 13 350#define DIF_SUBR_COPYOUTSTR 14 351#define DIF_SUBR_ALLOCA 15 352#define DIF_SUBR_BCOPY 16 353#define DIF_SUBR_COPYINTO 17 354#define DIF_SUBR_MSGDSIZE 18 355#define DIF_SUBR_MSGSIZE 19 356#define DIF_SUBR_GETMAJOR 20 357#define DIF_SUBR_GETMINOR 21 358#define DIF_SUBR_DDI_PATHNAME 22 359#define DIF_SUBR_STRJOIN 23 360#define DIF_SUBR_LLTOSTR 24 361#define DIF_SUBR_BASENAME 25 362#define DIF_SUBR_DIRNAME 26 363#define DIF_SUBR_CLEANPATH 27 364#define DIF_SUBR_STRCHR 28 365#define DIF_SUBR_STRRCHR 29 366#define DIF_SUBR_STRSTR 30 367#define DIF_SUBR_STRTOK 31 368#define DIF_SUBR_SUBSTR 32 369#define DIF_SUBR_INDEX 33 370#define DIF_SUBR_RINDEX 34 371#define DIF_SUBR_HTONS 35 372#define DIF_SUBR_HTONL 36 373#define DIF_SUBR_HTONLL 37 374#define DIF_SUBR_NTOHS 38 375#define DIF_SUBR_NTOHL 39 376#define DIF_SUBR_NTOHLL 40 377#define DIF_SUBR_INET_NTOP 41 378#define DIF_SUBR_INET_NTOA 42 379#define DIF_SUBR_INET_NTOA6 43 380#if !defined(__APPLE__) 381 382#define DIF_SUBR_MAX 43 /* max subroutine value */ 383#else 384#define DIF_SUBR_COREPROFILE 44 385 386#define DIF_SUBR_MAX 44 /* max subroutine value */ 387#endif /* __APPLE__ */ 388 389typedef uint32_t dif_instr_t; 390 391#define DIF_INSTR_OP(i) (((i) >> 24) & 0xff) 392#define DIF_INSTR_R1(i) (((i) >> 16) & 0xff) 393#define DIF_INSTR_R2(i) (((i) >> 8) & 0xff) 394#define DIF_INSTR_RD(i) ((i) & 0xff) 395#define DIF_INSTR_RS(i) ((i) & 0xff) 396#define DIF_INSTR_LABEL(i) ((i) & 0xffffff) 397#define DIF_INSTR_VAR(i) (((i) >> 8) & 0xffff) 398#define DIF_INSTR_INTEGER(i) (((i) >> 8) & 0xffff) 399#define DIF_INSTR_STRING(i) (((i) >> 8) & 0xffff) 400#define DIF_INSTR_SUBR(i) (((i) >> 8) & 0xffff) 401#define DIF_INSTR_TYPE(i) (((i) >> 16) & 0xff) 402#define DIF_INSTR_XLREF(i) (((i) >> 8) & 0xffff) 403 404#define DIF_INSTR_FMT(op, r1, r2, d) \ 405 (((op) << 24) | ((r1) << 16) | ((r2) << 8) | (d)) 406 407#define DIF_INSTR_NOT(r1, d) (DIF_INSTR_FMT(DIF_OP_NOT, r1, 0, d)) 408#define DIF_INSTR_MOV(r1, d) (DIF_INSTR_FMT(DIF_OP_MOV, r1, 0, d)) 409#define DIF_INSTR_CMP(op, r1, r2) (DIF_INSTR_FMT(op, r1, r2, 0)) 410#define DIF_INSTR_TST(r1) (DIF_INSTR_FMT(DIF_OP_TST, r1, 0, 0)) 411#define DIF_INSTR_BRANCH(op, label) (((op) << 24) | (label)) 412#define DIF_INSTR_LOAD(op, r1, d) (DIF_INSTR_FMT(op, r1, 0, d)) 413#define DIF_INSTR_STORE(op, r1, d) (DIF_INSTR_FMT(op, r1, 0, d)) 414#define DIF_INSTR_SETX(i, d) ((DIF_OP_SETX << 24) | ((i) << 8) | (d)) 415#define DIF_INSTR_SETS(s, d) ((DIF_OP_SETS << 24) | ((s) << 8) | (d)) 416#define DIF_INSTR_RET(d) (DIF_INSTR_FMT(DIF_OP_RET, 0, 0, d)) 417#define DIF_INSTR_NOP (DIF_OP_NOP << 24) 418#define DIF_INSTR_LDA(op, v, r, d) (DIF_INSTR_FMT(op, v, r, d)) 419#define DIF_INSTR_LDV(op, v, d) (((op) << 24) | ((v) << 8) | (d)) 420#define DIF_INSTR_STV(op, v, rs) (((op) << 24) | ((v) << 8) | (rs)) 421#define DIF_INSTR_CALL(s, d) ((DIF_OP_CALL << 24) | ((s) << 8) | (d)) 422#define DIF_INSTR_PUSHTS(op, t, r2, rs) (DIF_INSTR_FMT(op, t, r2, rs)) 423#define DIF_INSTR_POPTS (DIF_OP_POPTS << 24) 424#define DIF_INSTR_FLUSHTS (DIF_OP_FLUSHTS << 24) 425#define DIF_INSTR_ALLOCS(r1, d) (DIF_INSTR_FMT(DIF_OP_ALLOCS, r1, 0, d)) 426#define DIF_INSTR_COPYS(r1, r2, d) (DIF_INSTR_FMT(DIF_OP_COPYS, r1, r2, d)) 427#define DIF_INSTR_XLATE(op, r, d) (((op) << 24) | ((r) << 8) | (d)) 428 429#define DIF_REG_R0 0 /* %r0 is always set to zero */ 430 431/* 432 * A DTrace Intermediate Format Type (DIF Type) is used to represent the types 433 * of variables, function and associative array arguments, and the return type 434 * for each DIF object (shown below). It contains a description of the type, 435 * its size in bytes, and a module identifier. 436 */ 437typedef struct dtrace_diftype { 438 uint8_t dtdt_kind; /* type kind (see below) */ 439 uint8_t dtdt_ckind; /* type kind in CTF */ 440 uint8_t dtdt_flags; /* type flags (see below) */ 441 uint8_t dtdt_pad; /* reserved for future use */ 442 uint32_t dtdt_size; /* type size in bytes (unless string) */ 443} dtrace_diftype_t; 444 445#define DIF_TYPE_CTF 0 /* type is a CTF type */ 446#define DIF_TYPE_STRING 1 /* type is a D string */ 447 448#define DIF_TF_BYREF 0x1 /* type is passed by reference */ 449 450/* 451 * A DTrace Intermediate Format variable record is used to describe each of the 452 * variables referenced by a given DIF object. It contains an integer variable 453 * identifier along with variable scope and properties, as shown below. The 454 * size of this structure must be sizeof (int) aligned. 455 */ 456typedef struct dtrace_difv { 457 uint32_t dtdv_name; /* variable name index in dtdo_strtab */ 458 uint32_t dtdv_id; /* variable reference identifier */ 459 uint8_t dtdv_kind; /* variable kind (see below) */ 460 uint8_t dtdv_scope; /* variable scope (see below) */ 461 uint16_t dtdv_flags; /* variable flags (see below) */ 462 dtrace_diftype_t dtdv_type; /* variable type (see above) */ 463} dtrace_difv_t; 464 465#define DIFV_KIND_ARRAY 0 /* variable is an array of quantities */ 466#define DIFV_KIND_SCALAR 1 /* variable is a scalar quantity */ 467 468#define DIFV_SCOPE_GLOBAL 0 /* variable has global scope */ 469#define DIFV_SCOPE_THREAD 1 /* variable has thread scope */ 470#define DIFV_SCOPE_LOCAL 2 /* variable has local scope */ 471 472#define DIFV_F_REF 0x1 /* variable is referenced by DIFO */ 473#define DIFV_F_MOD 0x2 /* variable is written by DIFO */ 474 475/* 476 * DTrace Actions 477 * 478 * The upper byte determines the class of the action; the low bytes determines 479 * the specific action within that class. The classes of actions are as 480 * follows: 481 * 482 * [ no class ] <= May record process- or kernel-related data 483 * DTRACEACT_PROC <= Only records process-related data 484 * DTRACEACT_PROC_DESTRUCTIVE <= Potentially destructive to processes 485 * DTRACEACT_KERNEL <= Only records kernel-related data 486 * DTRACEACT_KERNEL_DESTRUCTIVE <= Potentially destructive to the kernel 487 * DTRACEACT_SPECULATIVE <= Speculation-related action 488 * DTRACEACT_AGGREGATION <= Aggregating action 489 */ 490#define DTRACEACT_NONE 0 /* no action */ 491#define DTRACEACT_DIFEXPR 1 /* action is DIF expression */ 492#define DTRACEACT_EXIT 2 /* exit() action */ 493#define DTRACEACT_PRINTF 3 /* printf() action */ 494#define DTRACEACT_PRINTA 4 /* printa() action */ 495#define DTRACEACT_LIBACT 5 /* library-controlled action */ 496 497#if defined(__APPLE__) 498#define DTRACEACT_APPLEBINARY 50 /* Apple DT perf. tool action */ 499#endif /* __APPLE__ */ 500 501#define DTRACEACT_PROC 0x0100 502#define DTRACEACT_USTACK (DTRACEACT_PROC + 1) 503#define DTRACEACT_JSTACK (DTRACEACT_PROC + 2) 504#define DTRACEACT_USYM (DTRACEACT_PROC + 3) 505#define DTRACEACT_UMOD (DTRACEACT_PROC + 4) 506#define DTRACEACT_UADDR (DTRACEACT_PROC + 5) 507 508#define DTRACEACT_PROC_DESTRUCTIVE 0x0200 509#define DTRACEACT_STOP (DTRACEACT_PROC_DESTRUCTIVE + 1) 510#define DTRACEACT_RAISE (DTRACEACT_PROC_DESTRUCTIVE + 2) 511#define DTRACEACT_SYSTEM (DTRACEACT_PROC_DESTRUCTIVE + 3) 512#define DTRACEACT_FREOPEN (DTRACEACT_PROC_DESTRUCTIVE + 4) 513 514#if defined(__APPLE__) 515/* 516 * Dtrace stop() will task_suspend the currently running process. 517 * Dtrace pidresume(pid) will task_resume it. 518 */ 519 520#define DTRACEACT_PIDRESUME (DTRACEACT_PROC_DESTRUCTIVE + 50) 521#endif /* __APPLE__ */ 522 523#define DTRACEACT_PROC_CONTROL 0x0300 524 525#define DTRACEACT_KERNEL 0x0400 526#define DTRACEACT_STACK (DTRACEACT_KERNEL + 1) 527#define DTRACEACT_SYM (DTRACEACT_KERNEL + 2) 528#define DTRACEACT_MOD (DTRACEACT_KERNEL + 3) 529 530#define DTRACEACT_KERNEL_DESTRUCTIVE 0x0500 531#define DTRACEACT_BREAKPOINT (DTRACEACT_KERNEL_DESTRUCTIVE + 1) 532#define DTRACEACT_PANIC (DTRACEACT_KERNEL_DESTRUCTIVE + 2) 533#define DTRACEACT_CHILL (DTRACEACT_KERNEL_DESTRUCTIVE + 3) 534 535#define DTRACEACT_SPECULATIVE 0x0600 536#define DTRACEACT_SPECULATE (DTRACEACT_SPECULATIVE + 1) 537#define DTRACEACT_COMMIT (DTRACEACT_SPECULATIVE + 2) 538#define DTRACEACT_DISCARD (DTRACEACT_SPECULATIVE + 3) 539 540#define DTRACEACT_CLASS(x) ((x) & 0xff00) 541 542#define DTRACEACT_ISDESTRUCTIVE(x) \ 543 (DTRACEACT_CLASS(x) == DTRACEACT_PROC_DESTRUCTIVE || \ 544 DTRACEACT_CLASS(x) == DTRACEACT_KERNEL_DESTRUCTIVE) 545 546#define DTRACEACT_ISSPECULATIVE(x) \ 547 (DTRACEACT_CLASS(x) == DTRACEACT_SPECULATIVE) 548 549#define DTRACEACT_ISPRINTFLIKE(x) \ 550 ((x) == DTRACEACT_PRINTF || (x) == DTRACEACT_PRINTA || \ 551 (x) == DTRACEACT_SYSTEM || (x) == DTRACEACT_FREOPEN) 552 553/* 554 * DTrace Aggregating Actions 555 * 556 * These are functions f(x) for which the following is true: 557 * 558 * f(f(x_0) U f(x_1) U ... U f(x_n)) = f(x_0 U x_1 U ... U x_n) 559 * 560 * where x_n is a set of arbitrary data. Aggregating actions are in their own 561 * DTrace action class, DTTRACEACT_AGGREGATION. The macros provided here allow 562 * for easier processing of the aggregation argument and data payload for a few 563 * aggregating actions (notably: quantize(), lquantize(), and ustack()). 564 */ 565#define DTRACEACT_AGGREGATION 0x0700 566#define DTRACEAGG_COUNT (DTRACEACT_AGGREGATION + 1) 567#define DTRACEAGG_MIN (DTRACEACT_AGGREGATION + 2) 568#define DTRACEAGG_MAX (DTRACEACT_AGGREGATION + 3) 569#define DTRACEAGG_AVG (DTRACEACT_AGGREGATION + 4) 570#define DTRACEAGG_SUM (DTRACEACT_AGGREGATION + 5) 571#define DTRACEAGG_STDDEV (DTRACEACT_AGGREGATION + 6) 572#define DTRACEAGG_QUANTIZE (DTRACEACT_AGGREGATION + 7) 573#define DTRACEAGG_LQUANTIZE (DTRACEACT_AGGREGATION + 8) 574 575#define DTRACEACT_ISAGG(x) \ 576 (DTRACEACT_CLASS(x) == DTRACEACT_AGGREGATION) 577 578#if !defined(__APPLE__) /* Quiet compiler warning. */ 579#define DTRACE_QUANTIZE_NBUCKETS \ 580 (((sizeof (uint64_t) * NBBY) - 1) * 2 + 1) 581 582#define DTRACE_QUANTIZE_ZEROBUCKET ((sizeof (uint64_t) * NBBY) - 1) 583#else 584#define DTRACE_QUANTIZE_NBUCKETS \ 585 (int)(((sizeof (uint64_t) * NBBY) - 1) * 2 + 1) 586 587#define DTRACE_QUANTIZE_ZEROBUCKET (int64_t)((sizeof (uint64_t) * NBBY) - 1) 588#endif /* __APPLE __*/ 589 590#define DTRACE_QUANTIZE_BUCKETVAL(buck) \ 591 (int64_t)((buck) < DTRACE_QUANTIZE_ZEROBUCKET ? \ 592 -(1LL << (DTRACE_QUANTIZE_ZEROBUCKET - 1 - (buck))) : \ 593 (buck) == DTRACE_QUANTIZE_ZEROBUCKET ? 0 : \ 594 1LL << ((buck) - DTRACE_QUANTIZE_ZEROBUCKET - 1)) 595 596#define DTRACE_LQUANTIZE_STEPSHIFT 48 597#define DTRACE_LQUANTIZE_STEPMASK ((uint64_t)UINT16_MAX << 48) 598#define DTRACE_LQUANTIZE_LEVELSHIFT 32 599#define DTRACE_LQUANTIZE_LEVELMASK ((uint64_t)UINT16_MAX << 32) 600#define DTRACE_LQUANTIZE_BASESHIFT 0 601#define DTRACE_LQUANTIZE_BASEMASK UINT32_MAX 602 603#define DTRACE_LQUANTIZE_STEP(x) \ 604 (uint16_t)(((x) & DTRACE_LQUANTIZE_STEPMASK) >> \ 605 DTRACE_LQUANTIZE_STEPSHIFT) 606 607#define DTRACE_LQUANTIZE_LEVELS(x) \ 608 (uint16_t)(((x) & DTRACE_LQUANTIZE_LEVELMASK) >> \ 609 DTRACE_LQUANTIZE_LEVELSHIFT) 610 611#define DTRACE_LQUANTIZE_BASE(x) \ 612 (int32_t)(((x) & DTRACE_LQUANTIZE_BASEMASK) >> \ 613 DTRACE_LQUANTIZE_BASESHIFT) 614 615#define DTRACE_USTACK_NFRAMES(x) (uint32_t)((x) & UINT32_MAX) 616#define DTRACE_USTACK_STRSIZE(x) (uint32_t)((x) >> 32) 617#define DTRACE_USTACK_ARG(x, y) \ 618 ((((uint64_t)(y)) << 32) | ((x) & UINT32_MAX)) 619 620#if !defined(__APPLE__) 621 622#ifndef _LP64 623#ifndef _LITTLE_ENDIAN 624#define DTRACE_PTR(type, name) uint32_t name##pad; type *name 625#else 626#define DTRACE_PTR(type, name) type *name; uint32_t name##pad 627#endif 628#else 629#define DTRACE_PTR(type, name) type *name 630#endif 631 632#else 633 634#ifndef _LP64 635#define DTRACE_PTR(type, name) user_addr_t name 636#else 637#define DTRACE_PTR(type, name) type *name 638#endif 639 640#endif /* __APPLE__ */ 641 642/* 643 * DTrace Object Format (DOF) 644 * 645 * DTrace programs can be persistently encoded in the DOF format so that they 646 * may be embedded in other programs (for example, in an ELF file) or in the 647 * dtrace driver configuration file for use in anonymous tracing. The DOF 648 * format is versioned and extensible so that it can be revised and so that 649 * internal data structures can be modified or extended compatibly. All DOF 650 * structures use fixed-size types, so the 32-bit and 64-bit representations 651 * are identical and consumers can use either data model transparently. 652 * 653 * The file layout is structured as follows: 654 * 655 * +---------------+-------------------+----- ... ----+---- ... ------+ 656 * | dof_hdr_t | dof_sec_t[ ... ] | loadable | non-loadable | 657 * | (file header) | (section headers) | section data | section data | 658 * +---------------+-------------------+----- ... ----+---- ... ------+ 659 * |<------------ dof_hdr.dofh_loadsz --------------->| | 660 * |<------------ dof_hdr.dofh_filesz ------------------------------->| 661 * 662 * The file header stores meta-data including a magic number, data model for 663 * the instrumentation, data encoding, and properties of the DIF code within. 664 * The header describes its own size and the size of the section headers. By 665 * convention, an array of section headers follows the file header, and then 666 * the data for all loadable sections and unloadable sections. This permits 667 * consumer code to easily download the headers and all loadable data into the 668 * DTrace driver in one contiguous chunk, omitting other extraneous sections. 669 * 670 * The section headers describe the size, offset, alignment, and section type 671 * for each section. Sections are described using a set of #defines that tell 672 * the consumer what kind of data is expected. Sections can contain links to 673 * other sections by storing a dof_secidx_t, an index into the section header 674 * array, inside of the section data structures. The section header includes 675 * an entry size so that sections with data arrays can grow their structures. 676 * 677 * The DOF data itself can contain many snippets of DIF (i.e. >1 DIFOs), which 678 * are represented themselves as a collection of related DOF sections. This 679 * permits us to change the set of sections associated with a DIFO over time, 680 * and also permits us to encode DIFOs that contain different sets of sections. 681 * When a DOF section wants to refer to a DIFO, it stores the dof_secidx_t of a 682 * section of type DOF_SECT_DIFOHDR. This section's data is then an array of 683 * dof_secidx_t's which in turn denote the sections associated with this DIFO. 684 * 685 * This loose coupling of the file structure (header and sections) to the 686 * structure of the DTrace program itself (ECB descriptions, action 687 * descriptions, and DIFOs) permits activities such as relocation processing 688 * to occur in a single pass without having to understand D program structure. 689 * 690 * Finally, strings are always stored in ELF-style string tables along with a 691 * string table section index and string table offset. Therefore strings in 692 * DOF are always arbitrary-length and not bound to the current implementation. 693 */ 694 695#define DOF_ID_SIZE 16 /* total size of dofh_ident[] in bytes */ 696 697typedef struct dof_hdr { 698 uint8_t dofh_ident[DOF_ID_SIZE]; /* identification bytes (see below) */ 699 uint32_t dofh_flags; /* file attribute flags (if any) */ 700 uint32_t dofh_hdrsize; /* size of file header in bytes */ 701 uint32_t dofh_secsize; /* size of section header in bytes */ 702 uint32_t dofh_secnum; /* number of section headers */ 703 uint64_t dofh_secoff; /* file offset of section headers */ 704 uint64_t dofh_loadsz; /* file size of loadable portion */ 705 uint64_t dofh_filesz; /* file size of entire DOF file */ 706 uint64_t dofh_pad; /* reserved for future use */ 707} dof_hdr_t; 708 709#define DOF_ID_MAG0 0 /* first byte of magic number */ 710#define DOF_ID_MAG1 1 /* second byte of magic number */ 711#define DOF_ID_MAG2 2 /* third byte of magic number */ 712#define DOF_ID_MAG3 3 /* fourth byte of magic number */ 713#define DOF_ID_MODEL 4 /* DOF data model (see below) */ 714#define DOF_ID_ENCODING 5 /* DOF data encoding (see below) */ 715#define DOF_ID_VERSION 6 /* DOF file format major version (see below) */ 716#define DOF_ID_DIFVERS 7 /* DIF instruction set version */ 717#define DOF_ID_DIFIREG 8 /* DIF integer registers used by compiler */ 718#define DOF_ID_DIFTREG 9 /* DIF tuple registers used by compiler */ 719#define DOF_ID_PAD 10 /* start of padding bytes (all zeroes) */ 720 721#define DOF_MAG_MAG0 0x7F /* DOF_ID_MAG[0-3] */ 722#define DOF_MAG_MAG1 'D' 723#define DOF_MAG_MAG2 'O' 724#define DOF_MAG_MAG3 'F' 725 726#define DOF_MAG_STRING "\177DOF" 727#define DOF_MAG_STRLEN 4 728 729#define DOF_MODEL_NONE 0 /* DOF_ID_MODEL */ 730#define DOF_MODEL_ILP32 1 731#define DOF_MODEL_LP64 2 732 733#ifdef _LP64 734#define DOF_MODEL_NATIVE DOF_MODEL_LP64 735#else 736#define DOF_MODEL_NATIVE DOF_MODEL_ILP32 737#endif 738 739#define DOF_ENCODE_NONE 0 /* DOF_ID_ENCODING */ 740#define DOF_ENCODE_LSB 1 741#define DOF_ENCODE_MSB 2 742 743#ifdef _BIG_ENDIAN 744#define DOF_ENCODE_NATIVE DOF_ENCODE_MSB 745#else 746#define DOF_ENCODE_NATIVE DOF_ENCODE_LSB 747#endif 748 749#define DOF_VERSION_1 1 /* DOF version 1: Solaris 10 FCS */ 750#define DOF_VERSION_2 2 /* DOF version 2: Solaris Express 6/06 */ 751#if !defined(__APPLE__) 752#define DOF_VERSION DOF_VERSION_2 /* Latest DOF version */ 753#else 754#define DOF_VERSION_3 3 /* DOF version 3: Minimum version for Leopard */ 755#define DOF_VERSION DOF_VERSION_3 /* Latest DOF version */ 756#endif /* __APPLE__ */ 757 758#define DOF_FL_VALID 0 /* mask of all valid dofh_flags bits */ 759 760typedef uint32_t dof_secidx_t; /* section header table index type */ 761typedef uint32_t dof_stridx_t; /* string table index type */ 762 763#define DOF_SECIDX_NONE (-1U) /* null value for section indices */ 764#define DOF_STRIDX_NONE (-1U) /* null value for string indices */ 765 766typedef struct dof_sec { 767 uint32_t dofs_type; /* section type (see below) */ 768 uint32_t dofs_align; /* section data memory alignment */ 769 uint32_t dofs_flags; /* section flags (if any) */ 770 uint32_t dofs_entsize; /* size of section entry (if table) */ 771 uint64_t dofs_offset; /* offset of section data within file */ 772 uint64_t dofs_size; /* size of section data in bytes */ 773} dof_sec_t; 774 775#define DOF_SECT_NONE 0 /* null section */ 776#define DOF_SECT_COMMENTS 1 /* compiler comments */ 777#define DOF_SECT_SOURCE 2 /* D program source code */ 778#define DOF_SECT_ECBDESC 3 /* dof_ecbdesc_t */ 779#define DOF_SECT_PROBEDESC 4 /* dof_probedesc_t */ 780#define DOF_SECT_ACTDESC 5 /* dof_actdesc_t array */ 781#define DOF_SECT_DIFOHDR 6 /* dof_difohdr_t (variable length) */ 782#define DOF_SECT_DIF 7 /* uint32_t array of byte code */ 783#define DOF_SECT_STRTAB 8 /* string table */ 784#define DOF_SECT_VARTAB 9 /* dtrace_difv_t array */ 785#define DOF_SECT_RELTAB 10 /* dof_relodesc_t array */ 786#define DOF_SECT_TYPTAB 11 /* dtrace_diftype_t array */ 787#define DOF_SECT_URELHDR 12 /* dof_relohdr_t (user relocations) */ 788#define DOF_SECT_KRELHDR 13 /* dof_relohdr_t (kernel relocations) */ 789#define DOF_SECT_OPTDESC 14 /* dof_optdesc_t array */ 790#define DOF_SECT_PROVIDER 15 /* dof_provider_t */ 791#define DOF_SECT_PROBES 16 /* dof_probe_t array */ 792#define DOF_SECT_PRARGS 17 /* uint8_t array (probe arg mappings) */ 793#define DOF_SECT_PROFFS 18 /* uint32_t array (probe arg offsets) */ 794#define DOF_SECT_INTTAB 19 /* uint64_t array */ 795#define DOF_SECT_UTSNAME 20 /* struct utsname */ 796#define DOF_SECT_XLTAB 21 /* dof_xlref_t array */ 797#define DOF_SECT_XLMEMBERS 22 /* dof_xlmember_t array */ 798#define DOF_SECT_XLIMPORT 23 /* dof_xlator_t */ 799#define DOF_SECT_XLEXPORT 24 /* dof_xlator_t */ 800#define DOF_SECT_PREXPORT 25 /* dof_secidx_t array (exported objs) */ 801#define DOF_SECT_PRENOFFS 26 /* uint32_t array (enabled offsets) */ 802 803#define DOF_SECF_LOAD 1 /* section should be loaded */ 804 805typedef struct dof_ecbdesc { 806 dof_secidx_t dofe_probes; /* link to DOF_SECT_PROBEDESC */ 807 dof_secidx_t dofe_pred; /* link to DOF_SECT_DIFOHDR */ 808 dof_secidx_t dofe_actions; /* link to DOF_SECT_ACTDESC */ 809 uint32_t dofe_pad; /* reserved for future use */ 810 uint64_t dofe_uarg; /* user-supplied library argument */ 811} dof_ecbdesc_t; 812 813typedef struct dof_probedesc { 814 dof_secidx_t dofp_strtab; /* link to DOF_SECT_STRTAB section */ 815 dof_stridx_t dofp_provider; /* provider string */ 816 dof_stridx_t dofp_mod; /* module string */ 817 dof_stridx_t dofp_func; /* function string */ 818 dof_stridx_t dofp_name; /* name string */ 819 uint32_t dofp_id; /* probe identifier (or zero) */ 820} dof_probedesc_t; 821 822typedef struct dof_actdesc { 823 dof_secidx_t dofa_difo; /* link to DOF_SECT_DIFOHDR */ 824 dof_secidx_t dofa_strtab; /* link to DOF_SECT_STRTAB section */ 825 uint32_t dofa_kind; /* action kind (DTRACEACT_* constant) */ 826 uint32_t dofa_ntuple; /* number of subsequent tuple actions */ 827 uint64_t dofa_arg; /* kind-specific argument */ 828 uint64_t dofa_uarg; /* user-supplied argument */ 829} dof_actdesc_t; 830 831typedef struct dof_difohdr { 832 dtrace_diftype_t dofd_rtype; /* return type for this fragment */ 833 dof_secidx_t dofd_links[1]; /* variable length array of indices */ 834} dof_difohdr_t; 835 836typedef struct dof_relohdr { 837 dof_secidx_t dofr_strtab; /* link to DOF_SECT_STRTAB for names */ 838 dof_secidx_t dofr_relsec; /* link to DOF_SECT_RELTAB for relos */ 839 dof_secidx_t dofr_tgtsec; /* link to section we are relocating */ 840} dof_relohdr_t; 841 842typedef struct dof_relodesc { 843 dof_stridx_t dofr_name; /* string name of relocation symbol */ 844 uint32_t dofr_type; /* relo type (DOF_RELO_* constant) */ 845 uint64_t dofr_offset; /* byte offset for relocation */ 846 uint64_t dofr_data; /* additional type-specific data */ 847} dof_relodesc_t; 848 849#define DOF_RELO_NONE 0 /* empty relocation entry */ 850#define DOF_RELO_SETX 1 /* relocate setx value */ 851 852typedef struct dof_optdesc { 853 uint32_t dofo_option; /* option identifier */ 854 dof_secidx_t dofo_strtab; /* string table, if string option */ 855 uint64_t dofo_value; /* option value or string index */ 856} dof_optdesc_t; 857 858typedef uint32_t dof_attr_t; /* encoded stability attributes */ 859 860#define DOF_ATTR(n, d, c) (((n) << 24) | ((d) << 16) | ((c) << 8)) 861#define DOF_ATTR_NAME(a) (((a) >> 24) & 0xff) 862#define DOF_ATTR_DATA(a) (((a) >> 16) & 0xff) 863#define DOF_ATTR_CLASS(a) (((a) >> 8) & 0xff) 864 865typedef struct dof_provider { 866 dof_secidx_t dofpv_strtab; /* link to DOF_SECT_STRTAB section */ 867 dof_secidx_t dofpv_probes; /* link to DOF_SECT_PROBES section */ 868 dof_secidx_t dofpv_prargs; /* link to DOF_SECT_PRARGS section */ 869 dof_secidx_t dofpv_proffs; /* link to DOF_SECT_PROFFS section */ 870 dof_stridx_t dofpv_name; /* provider name string */ 871 dof_attr_t dofpv_provattr; /* provider attributes */ 872 dof_attr_t dofpv_modattr; /* module attributes */ 873 dof_attr_t dofpv_funcattr; /* function attributes */ 874 dof_attr_t dofpv_nameattr; /* name attributes */ 875 dof_attr_t dofpv_argsattr; /* args attributes */ 876 dof_secidx_t dofpv_prenoffs; /* link to DOF_SECT_PRENOFFS section */ 877} dof_provider_t; 878 879typedef struct dof_probe { 880 uint64_t dofpr_addr; /* probe base address or offset */ 881 dof_stridx_t dofpr_func; /* probe function string */ 882 dof_stridx_t dofpr_name; /* probe name string */ 883 dof_stridx_t dofpr_nargv; /* native argument type strings */ 884 dof_stridx_t dofpr_xargv; /* translated argument type strings */ 885 uint32_t dofpr_argidx; /* index of first argument mapping */ 886 uint32_t dofpr_offidx; /* index of first offset entry */ 887 uint8_t dofpr_nargc; /* native argument count */ 888 uint8_t dofpr_xargc; /* translated argument count */ 889 uint16_t dofpr_noffs; /* number of offset entries for probe */ 890 uint32_t dofpr_enoffidx; /* index of first is-enabled offset */ 891 uint16_t dofpr_nenoffs; /* number of is-enabled offsets */ 892 uint16_t dofpr_pad1; /* reserved for future use */ 893 uint32_t dofpr_pad2; /* reserved for future use */ 894} dof_probe_t; 895 896typedef struct dof_xlator { 897 dof_secidx_t dofxl_members; /* link to DOF_SECT_XLMEMBERS section */ 898 dof_secidx_t dofxl_strtab; /* link to DOF_SECT_STRTAB section */ 899 dof_stridx_t dofxl_argv; /* input parameter type strings */ 900 uint32_t dofxl_argc; /* input parameter list length */ 901 dof_stridx_t dofxl_type; /* output type string name */ 902 dof_attr_t dofxl_attr; /* output stability attributes */ 903} dof_xlator_t; 904 905typedef struct dof_xlmember { 906 dof_secidx_t dofxm_difo; /* member link to DOF_SECT_DIFOHDR */ 907 dof_stridx_t dofxm_name; /* member name */ 908 dtrace_diftype_t dofxm_type; /* member type */ 909} dof_xlmember_t; 910 911typedef struct dof_xlref { 912 dof_secidx_t dofxr_xlator; /* link to DOF_SECT_XLATORS section */ 913 uint32_t dofxr_member; /* index of referenced dof_xlmember */ 914 uint32_t dofxr_argn; /* index of argument for DIF_OP_XLARG */ 915} dof_xlref_t; 916 917/* 918 * DTrace Intermediate Format Object (DIFO) 919 * 920 * A DIFO is used to store the compiled DIF for a D expression, its return 921 * type, and its string and variable tables. The string table is a single 922 * buffer of character data into which sets instructions and variable 923 * references can reference strings using a byte offset. The variable table 924 * is an array of dtrace_difv_t structures that describe the name and type of 925 * each variable and the id used in the DIF code. This structure is described 926 * above in the DIF section of this header file. The DIFO is used at both 927 * user-level (in the library) and in the kernel, but the structure is never 928 * passed between the two: the DOF structures form the only interface. As a 929 * result, the definition can change depending on the presence of _KERNEL. 930 */ 931typedef struct dtrace_difo { 932 dif_instr_t *dtdo_buf; /* instruction buffer */ 933 uint64_t *dtdo_inttab; /* integer table (optional) */ 934 char *dtdo_strtab; /* string table (optional) */ 935 dtrace_difv_t *dtdo_vartab; /* variable table (optional) */ 936 uint_t dtdo_len; /* length of instruction buffer */ 937 uint_t dtdo_intlen; /* length of integer table */ 938 uint_t dtdo_strlen; /* length of string table */ 939 uint_t dtdo_varlen; /* length of variable table */ 940 dtrace_diftype_t dtdo_rtype; /* return type */ 941 uint_t dtdo_refcnt; /* owner reference count */ 942 uint_t dtdo_destructive; /* invokes destructive subroutines */ 943#ifndef _KERNEL 944 dof_relodesc_t *dtdo_kreltab; /* kernel relocations */ 945 dof_relodesc_t *dtdo_ureltab; /* user relocations */ 946 struct dt_node **dtdo_xlmtab; /* translator references */ 947 uint_t dtdo_krelen; /* length of krelo table */ 948 uint_t dtdo_urelen; /* length of urelo table */ 949 uint_t dtdo_xlmlen; /* length of translator table */ 950#endif 951} dtrace_difo_t; 952 953/* 954 * DTrace Enabling Description Structures 955 * 956 * When DTrace is tracking the description of a DTrace enabling entity (probe, 957 * predicate, action, ECB, record, etc.), it does so in a description 958 * structure. These structures all end in "desc", and are used at both 959 * user-level and in the kernel -- but (with the exception of 960 * dtrace_probedesc_t) they are never passed between them. Typically, 961 * user-level will use the description structures when assembling an enabling. 962 * It will then distill those description structures into a DOF object (see 963 * above), and send it into the kernel. The kernel will again use the 964 * description structures to create a description of the enabling as it reads 965 * the DOF. When the description is complete, the enabling will be actually 966 * created -- turning it into the structures that represent the enabling 967 * instead of merely describing it. Not surprisingly, the description 968 * structures bear a strong resemblance to the DOF structures that act as their 969 * conduit. 970 */ 971struct dtrace_predicate; 972 973typedef struct dtrace_probedesc { 974 dtrace_id_t dtpd_id; /* probe identifier */ 975 char dtpd_provider[DTRACE_PROVNAMELEN]; /* probe provider name */ 976 char dtpd_mod[DTRACE_MODNAMELEN]; /* probe module name */ 977 char dtpd_func[DTRACE_FUNCNAMELEN]; /* probe function name */ 978 char dtpd_name[DTRACE_NAMELEN]; /* probe name */ 979} dtrace_probedesc_t; 980 981typedef struct dtrace_repldesc { 982 dtrace_probedesc_t dtrpd_match; /* probe descr. to match */ 983 dtrace_probedesc_t dtrpd_create; /* probe descr. to create */ 984} dtrace_repldesc_t; 985 986typedef struct dtrace_preddesc { 987 dtrace_difo_t *dtpdd_difo; /* pointer to DIF object */ 988 struct dtrace_predicate *dtpdd_predicate; /* pointer to predicate */ 989} dtrace_preddesc_t; 990 991typedef struct dtrace_actdesc { 992 dtrace_difo_t *dtad_difo; /* pointer to DIF object */ 993 struct dtrace_actdesc *dtad_next; /* next action */ 994 dtrace_actkind_t dtad_kind; /* kind of action */ 995 uint32_t dtad_ntuple; /* number in tuple */ 996 uint64_t dtad_arg; /* action argument */ 997 uint64_t dtad_uarg; /* user argument */ 998 int dtad_refcnt; /* reference count */ 999} dtrace_actdesc_t; 1000 1001typedef struct dtrace_ecbdesc { 1002 dtrace_actdesc_t *dted_action; /* action description(s) */ 1003 dtrace_preddesc_t dted_pred; /* predicate description */ 1004 dtrace_probedesc_t dted_probe; /* probe description */ 1005 uint64_t dted_uarg; /* library argument */ 1006 int dted_refcnt; /* reference count */ 1007} dtrace_ecbdesc_t; 1008 1009/* 1010 * DTrace Metadata Description Structures 1011 * 1012 * DTrace separates the trace data stream from the metadata stream. The only 1013 * metadata tokens placed in the data stream are enabled probe identifiers 1014 * (EPIDs) or (in the case of aggregations) aggregation identifiers. In order 1015 * to determine the structure of the data, DTrace consumers pass the token to 1016 * the kernel, and receive in return a corresponding description of the enabled 1017 * probe (via the dtrace_eprobedesc structure) or the aggregation (via the 1018 * dtrace_aggdesc structure). Both of these structures are expressed in terms 1019 * of record descriptions (via the dtrace_recdesc structure) that describe the 1020 * exact structure of the data. Some record descriptions may also contain a 1021 * format identifier; this additional bit of metadata can be retrieved from the 1022 * kernel, for which a format description is returned via the dtrace_fmtdesc 1023 * structure. Note that all four of these structures must be bitness-neutral 1024 * to allow for a 32-bit DTrace consumer on a 64-bit kernel. 1025 */ 1026typedef struct dtrace_recdesc { 1027 dtrace_actkind_t dtrd_action; /* kind of action */ 1028 uint32_t dtrd_size; /* size of record */ 1029 uint32_t dtrd_offset; /* offset in ECB's data */ 1030 uint16_t dtrd_alignment; /* required alignment */ 1031 uint16_t dtrd_format; /* format, if any */ 1032 uint64_t dtrd_arg; /* action argument */ 1033 uint64_t dtrd_uarg; /* user argument */ 1034} dtrace_recdesc_t; 1035 1036typedef struct dtrace_eprobedesc { 1037 dtrace_epid_t dtepd_epid; /* enabled probe ID */ 1038 dtrace_id_t dtepd_probeid; /* probe ID */ 1039 uint64_t dtepd_uarg; /* library argument */ 1040 uint32_t dtepd_size; /* total size */ 1041 int dtepd_nrecs; /* number of records */ 1042 dtrace_recdesc_t dtepd_rec[1]; /* records themselves */ 1043} dtrace_eprobedesc_t; 1044 1045typedef struct dtrace_aggdesc { 1046 DTRACE_PTR(char, dtagd_name); /* not filled in by kernel */ 1047 dtrace_aggvarid_t dtagd_varid; /* not filled in by kernel */ 1048 int dtagd_flags; /* not filled in by kernel */ 1049 dtrace_aggid_t dtagd_id; /* aggregation ID */ 1050 dtrace_epid_t dtagd_epid; /* enabled probe ID */ 1051 uint32_t dtagd_size; /* size in bytes */ 1052 int dtagd_nrecs; /* number of records */ 1053 uint32_t dtagd_pad; /* explicit padding */ 1054 dtrace_recdesc_t dtagd_rec[1]; /* record descriptions */ 1055} dtrace_aggdesc_t; 1056 1057typedef struct dtrace_fmtdesc { 1058 DTRACE_PTR(char, dtfd_string); /* format string */ 1059 int dtfd_length; /* length of format string */ 1060 uint16_t dtfd_format; /* format identifier */ 1061} dtrace_fmtdesc_t; 1062 1063#define DTRACE_SIZEOF_EPROBEDESC(desc) \ 1064 (sizeof (dtrace_eprobedesc_t) + ((desc)->dtepd_nrecs ? \ 1065 (((desc)->dtepd_nrecs - 1) * sizeof (dtrace_recdesc_t)) : 0)) 1066 1067#define DTRACE_SIZEOF_AGGDESC(desc) \ 1068 (sizeof (dtrace_aggdesc_t) + ((desc)->dtagd_nrecs ? \ 1069 (((desc)->dtagd_nrecs - 1) * sizeof (dtrace_recdesc_t)) : 0)) 1070 1071/* 1072 * DTrace Option Interface 1073 * 1074 * Run-time DTrace options are set and retrieved via DOF_SECT_OPTDESC sections 1075 * in a DOF image. The dof_optdesc structure contains an option identifier and 1076 * an option value. The valid option identifiers are found below; the mapping 1077 * between option identifiers and option identifying strings is maintained at 1078 * user-level. Note that the value of DTRACEOPT_UNSET is such that all of the 1079 * following are potentially valid option values: all positive integers, zero 1080 * and negative one. Some options (notably "bufpolicy" and "bufresize") take 1081 * predefined tokens as their values; these are defined with 1082 * DTRACEOPT_{option}_{token}. 1083 */ 1084#define DTRACEOPT_BUFSIZE 0 /* buffer size */ 1085#define DTRACEOPT_BUFPOLICY 1 /* buffer policy */ 1086#define DTRACEOPT_DYNVARSIZE 2 /* dynamic variable size */ 1087#define DTRACEOPT_AGGSIZE 3 /* aggregation size */ 1088#define DTRACEOPT_SPECSIZE 4 /* speculation size */ 1089#define DTRACEOPT_NSPEC 5 /* number of speculations */ 1090#define DTRACEOPT_STRSIZE 6 /* string size */ 1091#define DTRACEOPT_CLEANRATE 7 /* dynvar cleaning rate */ 1092#define DTRACEOPT_CPU 8 /* CPU to trace */ 1093#define DTRACEOPT_BUFRESIZE 9 /* buffer resizing policy */ 1094#define DTRACEOPT_GRABANON 10 /* grab anonymous state, if any */ 1095#define DTRACEOPT_FLOWINDENT 11 /* indent function entry/return */ 1096#define DTRACEOPT_QUIET 12 /* only output explicitly traced data */ 1097#define DTRACEOPT_STACKFRAMES 13 /* number of stack frames */ 1098#define DTRACEOPT_USTACKFRAMES 14 /* number of user stack frames */ 1099#define DTRACEOPT_AGGRATE 15 /* aggregation snapshot rate */ 1100#define DTRACEOPT_SWITCHRATE 16 /* buffer switching rate */ 1101#define DTRACEOPT_STATUSRATE 17 /* status rate */ 1102#define DTRACEOPT_DESTRUCTIVE 18 /* destructive actions allowed */ 1103#define DTRACEOPT_STACKINDENT 19 /* output indent for stack traces */ 1104#define DTRACEOPT_RAWBYTES 20 /* always print bytes in raw form */ 1105#define DTRACEOPT_JSTACKFRAMES 21 /* number of jstack() frames */ 1106#define DTRACEOPT_JSTACKSTRSIZE 22 /* size of jstack() string table */ 1107#define DTRACEOPT_AGGSORTKEY 23 /* sort aggregations by key */ 1108#define DTRACEOPT_AGGSORTREV 24 /* reverse-sort aggregations */ 1109#define DTRACEOPT_AGGSORTPOS 25 /* agg. position to sort on */ 1110#define DTRACEOPT_AGGSORTKEYPOS 26 /* agg. key position to sort on */ 1111#if !defined(__APPLE__) 1112#define DTRACEOPT_MAX 27 /* number of options */ 1113#else 1114#define DTRACEOPT_STACKSYMBOLS 27 /* clear to prevent stack symbolication */ 1115#define DTRACEOPT_MAX 28 /* number of options */ 1116#endif /* __APPLE__ */ 1117 1118#define DTRACEOPT_UNSET (dtrace_optval_t)-2 /* unset option */ 1119 1120#define DTRACEOPT_BUFPOLICY_RING 0 /* ring buffer */ 1121#define DTRACEOPT_BUFPOLICY_FILL 1 /* fill buffer, then stop */ 1122#define DTRACEOPT_BUFPOLICY_SWITCH 2 /* switch buffers */ 1123 1124#define DTRACEOPT_BUFRESIZE_AUTO 0 /* automatic resizing */ 1125#define DTRACEOPT_BUFRESIZE_MANUAL 1 /* manual resizing */ 1126 1127/* 1128 * DTrace Buffer Interface 1129 * 1130 * In order to get a snapshot of the principal or aggregation buffer, 1131 * user-level passes a buffer description to the kernel with the dtrace_bufdesc 1132 * structure. This describes which CPU user-level is interested in, and 1133 * where user-level wishes the kernel to snapshot the buffer to (the 1134 * dtbd_data field). The kernel uses the same structure to pass back some 1135 * information regarding the buffer: the size of data actually copied out, the 1136 * number of drops, the number of errors, and the offset of the oldest record. 1137 * If the buffer policy is a "switch" policy, taking a snapshot of the 1138 * principal buffer has the additional effect of switching the active and 1139 * inactive buffers. Taking a snapshot of the aggregation buffer _always_ has 1140 * the additional effect of switching the active and inactive buffers. 1141 */ 1142typedef struct dtrace_bufdesc { 1143 uint64_t dtbd_size; /* size of buffer */ 1144 uint32_t dtbd_cpu; /* CPU or DTRACE_CPUALL */ 1145 uint32_t dtbd_errors; /* number of errors */ 1146 uint64_t dtbd_drops; /* number of drops */ 1147 DTRACE_PTR(char, dtbd_data); /* data */ 1148 uint64_t dtbd_oldest; /* offset of oldest record */ 1149} dtrace_bufdesc_t; 1150 1151/* 1152 * DTrace Status 1153 * 1154 * The status of DTrace is relayed via the dtrace_status structure. This 1155 * structure contains members to count drops other than the capacity drops 1156 * available via the buffer interface (see above). This consists of dynamic 1157 * drops (including capacity dynamic drops, rinsing drops and dirty drops), and 1158 * speculative drops (including capacity speculative drops, drops due to busy 1159 * speculative buffers and drops due to unavailable speculative buffers). 1160 * Additionally, the status structure contains a field to indicate the number 1161 * of "fill"-policy buffers have been filled and a boolean field to indicate 1162 * that exit() has been called. If the dtst_exiting field is non-zero, no 1163 * further data will be generated until tracing is stopped (at which time any 1164 * enablings of the END action will be processed); if user-level sees that 1165 * this field is non-zero, tracing should be stopped as soon as possible. 1166 */ 1167typedef struct dtrace_status { 1168 uint64_t dtst_dyndrops; /* dynamic drops */ 1169 uint64_t dtst_dyndrops_rinsing; /* dyn drops due to rinsing */ 1170 uint64_t dtst_dyndrops_dirty; /* dyn drops due to dirty */ 1171 uint64_t dtst_specdrops; /* speculative drops */ 1172 uint64_t dtst_specdrops_busy; /* spec drops due to busy */ 1173 uint64_t dtst_specdrops_unavail; /* spec drops due to unavail */ 1174 uint64_t dtst_errors; /* total errors */ 1175 uint64_t dtst_filled; /* number of filled bufs */ 1176 uint64_t dtst_stkstroverflows; /* stack string tab overflows */ 1177 uint64_t dtst_dblerrors; /* errors in ERROR probes */ 1178 char dtst_killed; /* non-zero if killed */ 1179 char dtst_exiting; /* non-zero if exit() called */ 1180 char dtst_pad[6]; /* pad out to 64-bit align */ 1181} dtrace_status_t; 1182 1183/* 1184 * DTrace Configuration 1185 * 1186 * User-level may need to understand some elements of the kernel DTrace 1187 * configuration in order to generate correct DIF. This information is 1188 * conveyed via the dtrace_conf structure. 1189 */ 1190typedef struct dtrace_conf { 1191 uint_t dtc_difversion; /* supported DIF version */ 1192 uint_t dtc_difintregs; /* # of DIF integer registers */ 1193 uint_t dtc_diftupregs; /* # of DIF tuple registers */ 1194 uint_t dtc_ctfmodel; /* CTF data model */ 1195 uint_t dtc_pad[8]; /* reserved for future use */ 1196} dtrace_conf_t; 1197 1198/* 1199 * DTrace Faults 1200 * 1201 * The constants below DTRACEFLT_LIBRARY indicate probe processing faults; 1202 * constants at or above DTRACEFLT_LIBRARY indicate faults in probe 1203 * postprocessing at user-level. Probe processing faults induce an ERROR 1204 * probe and are replicated in unistd.d to allow users' ERROR probes to decode 1205 * the error condition using thse symbolic labels. 1206 */ 1207#define DTRACEFLT_UNKNOWN 0 /* Unknown fault */ 1208#define DTRACEFLT_BADADDR 1 /* Bad address */ 1209#define DTRACEFLT_BADALIGN 2 /* Bad alignment */ 1210#define DTRACEFLT_ILLOP 3 /* Illegal operation */ 1211#define DTRACEFLT_DIVZERO 4 /* Divide-by-zero */ 1212#define DTRACEFLT_NOSCRATCH 5 /* Out of scratch space */ 1213#define DTRACEFLT_KPRIV 6 /* Illegal kernel access */ 1214#define DTRACEFLT_UPRIV 7 /* Illegal user access */ 1215#define DTRACEFLT_TUPOFLOW 8 /* Tuple stack overflow */ 1216#define DTRACEFLT_BADSTACK 9 /* Bad stack */ 1217 1218#define DTRACEFLT_LIBRARY 1000 /* Library-level fault */ 1219 1220/* 1221 * DTrace Argument Types 1222 * 1223 * Because it would waste both space and time, argument types do not reside 1224 * with the probe. In order to determine argument types for args[X] 1225 * variables, the D compiler queries for argument types on a probe-by-probe 1226 * basis. (This optimizes for the common case that arguments are either not 1227 * used or used in an untyped fashion.) Typed arguments are specified with a 1228 * string of the type name in the dtragd_native member of the argument 1229 * description structure. Typed arguments may be further translated to types 1230 * of greater stability; the provider indicates such a translated argument by 1231 * filling in the dtargd_xlate member with the string of the translated type. 1232 * Finally, the provider may indicate which argument value a given argument 1233 * maps to by setting the dtargd_mapping member -- allowing a single argument 1234 * to map to multiple args[X] variables. 1235 */ 1236typedef struct dtrace_argdesc { 1237 dtrace_id_t dtargd_id; /* probe identifier */ 1238 int dtargd_ndx; /* arg number (-1 iff none) */ 1239 int dtargd_mapping; /* value mapping */ 1240 char dtargd_native[DTRACE_ARGTYPELEN]; /* native type name */ 1241 char dtargd_xlate[DTRACE_ARGTYPELEN]; /* translated type name */ 1242} dtrace_argdesc_t; 1243 1244/* 1245 * DTrace Stability Attributes 1246 * 1247 * Each DTrace provider advertises the name and data stability of each of its 1248 * probe description components, as well as its architectural dependencies. 1249 * The D compiler can query the provider attributes (dtrace_pattr_t below) in 1250 * order to compute the properties of an input program and report them. 1251 */ 1252typedef uint8_t dtrace_stability_t; /* stability code (see attributes(5)) */ 1253typedef uint8_t dtrace_class_t; /* architectural dependency class */ 1254 1255#define DTRACE_STABILITY_INTERNAL 0 /* private to DTrace itself */ 1256#define DTRACE_STABILITY_PRIVATE 1 /* private to Sun (see docs) */ 1257#define DTRACE_STABILITY_OBSOLETE 2 /* scheduled for removal */ 1258#define DTRACE_STABILITY_EXTERNAL 3 /* not controlled by Sun */ 1259#define DTRACE_STABILITY_UNSTABLE 4 /* new or rapidly changing */ 1260#define DTRACE_STABILITY_EVOLVING 5 /* less rapidly changing */ 1261#define DTRACE_STABILITY_STABLE 6 /* mature interface from Sun */ 1262#define DTRACE_STABILITY_STANDARD 7 /* industry standard */ 1263#define DTRACE_STABILITY_MAX 7 /* maximum valid stability */ 1264 1265#define DTRACE_CLASS_UNKNOWN 0 /* unknown architectural dependency */ 1266#define DTRACE_CLASS_CPU 1 /* CPU-module-specific */ 1267#define DTRACE_CLASS_PLATFORM 2 /* platform-specific (uname -i) */ 1268#define DTRACE_CLASS_GROUP 3 /* hardware-group-specific (uname -m) */ 1269#define DTRACE_CLASS_ISA 4 /* ISA-specific (uname -p) */ 1270#define DTRACE_CLASS_COMMON 5 /* common to all systems */ 1271#define DTRACE_CLASS_MAX 5 /* maximum valid class */ 1272 1273#define DTRACE_PRIV_NONE 0x0000 1274#define DTRACE_PRIV_KERNEL 0x0001 1275#define DTRACE_PRIV_USER 0x0002 1276#define DTRACE_PRIV_PROC 0x0004 1277#define DTRACE_PRIV_OWNER 0x0008 1278#define DTRACE_PRIV_ZONEOWNER 0x0010 1279 1280#define DTRACE_PRIV_ALL \ 1281 (DTRACE_PRIV_KERNEL | DTRACE_PRIV_USER | \ 1282 DTRACE_PRIV_PROC | DTRACE_PRIV_OWNER | DTRACE_PRIV_ZONEOWNER) 1283 1284typedef struct dtrace_ppriv { 1285 uint32_t dtpp_flags; /* privilege flags */ 1286 uid_t dtpp_uid; /* user ID */ 1287 zoneid_t dtpp_zoneid; /* zone ID */ 1288} dtrace_ppriv_t; 1289 1290typedef struct dtrace_attribute { 1291 dtrace_stability_t dtat_name; /* entity name stability */ 1292 dtrace_stability_t dtat_data; /* entity data stability */ 1293 dtrace_class_t dtat_class; /* entity data dependency */ 1294} dtrace_attribute_t; 1295 1296typedef struct dtrace_pattr { 1297 dtrace_attribute_t dtpa_provider; /* provider attributes */ 1298 dtrace_attribute_t dtpa_mod; /* module attributes */ 1299 dtrace_attribute_t dtpa_func; /* function attributes */ 1300 dtrace_attribute_t dtpa_name; /* name attributes */ 1301 dtrace_attribute_t dtpa_args; /* args[] attributes */ 1302} dtrace_pattr_t; 1303 1304typedef struct dtrace_providerdesc { 1305 char dtvd_name[DTRACE_PROVNAMELEN]; /* provider name */ 1306 dtrace_pattr_t dtvd_attr; /* stability attributes */ 1307 dtrace_ppriv_t dtvd_priv; /* privileges required */ 1308} dtrace_providerdesc_t; 1309 1310/* 1311 * DTrace Pseudodevice Interface 1312 * 1313 * DTrace is controlled through ioctl(2)'s to the in-kernel dtrace:dtrace 1314 * pseudodevice driver. These ioctls comprise the user-kernel interface to 1315 * DTrace. 1316 */ 1317#if !defined(__APPLE__) 1318#define DTRACEIOC (('d' << 24) | ('t' << 16) | ('r' << 8)) 1319#define DTRACEIOC_PROVIDER (DTRACEIOC | 1) /* provider query */ 1320#define DTRACEIOC_PROBES (DTRACEIOC | 2) /* probe query */ 1321#define DTRACEIOC_BUFSNAP (DTRACEIOC | 4) /* snapshot buffer */ 1322#define DTRACEIOC_PROBEMATCH (DTRACEIOC | 5) /* match probes */ 1323#define DTRACEIOC_ENABLE (DTRACEIOC | 6) /* enable probes */ 1324#define DTRACEIOC_AGGSNAP (DTRACEIOC | 7) /* snapshot agg. */ 1325#define DTRACEIOC_EPROBE (DTRACEIOC | 8) /* get eprobe desc. */ 1326#define DTRACEIOC_PROBEARG (DTRACEIOC | 9) /* get probe arg */ 1327#define DTRACEIOC_CONF (DTRACEIOC | 10) /* get config. */ 1328#define DTRACEIOC_STATUS (DTRACEIOC | 11) /* get status */ 1329#define DTRACEIOC_GO (DTRACEIOC | 12) /* start tracing */ 1330#define DTRACEIOC_STOP (DTRACEIOC | 13) /* stop tracing */ 1331#define DTRACEIOC_AGGDESC (DTRACEIOC | 15) /* get agg. desc. */ 1332#define DTRACEIOC_FORMAT (DTRACEIOC | 16) /* get format str */ 1333#define DTRACEIOC_DOFGET (DTRACEIOC | 17) /* get DOF */ 1334#define DTRACEIOC_REPLICATE (DTRACEIOC | 18) /* replicate enab */ 1335#else 1336/* coding this as IOC_VOID allows this driver to handle its own copyin/copuout */ 1337#define DTRACEIOC _IO('d',0) 1338#define DTRACEIOC_PROVIDER (DTRACEIOC | 1) /* provider query */ 1339#define DTRACEIOC_PROBES (DTRACEIOC | 2) /* probe query */ 1340#define DTRACEIOC_BUFSNAP (DTRACEIOC | 4) /* snapshot buffer */ 1341#define DTRACEIOC_PROBEMATCH (DTRACEIOC | 5) /* match probes */ 1342#define DTRACEIOC_ENABLE (DTRACEIOC | 6) /* enable probes */ 1343#define DTRACEIOC_AGGSNAP (DTRACEIOC | 7) /* snapshot agg. */ 1344#define DTRACEIOC_EPROBE (DTRACEIOC | 8) /* get eprobe desc. */ 1345#define DTRACEIOC_PROBEARG (DTRACEIOC | 9) /* get probe arg */ 1346#define DTRACEIOC_CONF (DTRACEIOC | 10) /* get config. */ 1347#define DTRACEIOC_STATUS (DTRACEIOC | 11) /* get status */ 1348#define DTRACEIOC_GO (DTRACEIOC | 12) /* start tracing */ 1349#define DTRACEIOC_STOP (DTRACEIOC | 13) /* stop tracing */ 1350#define DTRACEIOC_AGGDESC (DTRACEIOC | 15) /* get agg. desc. */ 1351#define DTRACEIOC_FORMAT (DTRACEIOC | 16) /* get format str */ 1352#define DTRACEIOC_DOFGET (DTRACEIOC | 17) /* get DOF */ 1353#define DTRACEIOC_REPLICATE (DTRACEIOC | 18) /* replicate enab */ 1354#define DTRACEIOC_MODUUIDSLIST (DTRACEIOC | 30) /* APPLE ONLY, query for modules with missing symbols */ 1355#define DTRACEIOC_PROVMODSYMS (DTRACEIOC | 31) /* APPLE ONLY, provide missing symbols for a given module */ 1356 1357/* 1358 * The following structs are used to provide symbol information to the kernel from userspace. 1359 */ 1360 1361typedef struct dtrace_symbol { 1362 uint64_t dtsym_addr; /* address of the symbol */ 1363 uint64_t dtsym_size; /* size of the symbol, must be uint64_t to maintain alignment when called by 64b uproc in i386 kernel */ 1364 char dtsym_name[DTRACE_FUNCNAMELEN]; /* symbol name */ 1365} dtrace_symbol_t; 1366 1367typedef struct dtrace_module_symbols { 1368 UUID dtmodsyms_uuid; 1369 uint64_t dtmodsyms_count; 1370 dtrace_symbol_t dtmodsyms_symbols[1]; 1371} dtrace_module_symbols_t; 1372 1373#define DTRACE_MODULE_SYMBOLS_SIZE(count) (sizeof(dtrace_module_symbols_t) + ((count - 1) * sizeof(dtrace_symbol_t))) 1374 1375typedef struct dtrace_module_uuids_list { 1376 uint64_t dtmul_count; 1377 UUID dtmul_uuid[1]; 1378} dtrace_module_uuids_list_t; 1379 1380#define DTRACE_MODULE_UUIDS_LIST_SIZE(count) (sizeof(dtrace_module_uuids_list_t) + ((count - 1) * sizeof(UUID))) 1381 1382#endif /* __APPLE__ */ 1383 1384/* 1385 * DTrace Helpers 1386 * 1387 * In general, DTrace establishes probes in processes and takes actions on 1388 * processes without knowing their specific user-level structures. Instead of 1389 * existing in the framework, process-specific knowledge is contained by the 1390 * enabling D program -- which can apply process-specific knowledge by making 1391 * appropriate use of DTrace primitives like copyin() and copyinstr() to 1392 * operate on user-level data. However, there may exist some specific probes 1393 * of particular semantic relevance that the application developer may wish to 1394 * explicitly export. For example, an application may wish to export a probe 1395 * at the point that it begins and ends certain well-defined transactions. In 1396 * addition to providing probes, programs may wish to offer assistance for 1397 * certain actions. For example, in highly dynamic environments (e.g., Java), 1398 * it may be difficult to obtain a stack trace in terms of meaningful symbol 1399 * names (the translation from instruction addresses to corresponding symbol 1400 * names may only be possible in situ); these environments may wish to define 1401 * a series of actions to be applied in situ to obtain a meaningful stack 1402 * trace. 1403 * 1404 * These two mechanisms -- user-level statically defined tracing and assisting 1405 * DTrace actions -- are provided via DTrace _helpers_. Helpers are specified 1406 * via DOF, but unlike enabling DOF, helper DOF may contain definitions of 1407 * providers, probes and their arguments. If a helper wishes to provide 1408 * action assistance, probe descriptions and corresponding DIF actions may be 1409 * specified in the helper DOF. For such helper actions, however, the probe 1410 * description describes the specific helper: all DTrace helpers have the 1411 * provider name "dtrace" and the module name "helper", and the name of the 1412 * helper is contained in the function name (for example, the ustack() helper 1413 * is named "ustack"). Any helper-specific name may be contained in the name 1414 * (for example, if a helper were to have a constructor, it might be named 1415 * "dtrace:helper:<helper>:init"). Helper actions are only called when the 1416 * action that they are helping is taken. Helper actions may only return DIF 1417 * expressions, and may only call the following subroutines: 1418 * 1419 * alloca() <= Allocates memory out of the consumer's scratch space 1420 * bcopy() <= Copies memory to scratch space 1421 * copyin() <= Copies memory from user-level into consumer's scratch 1422 * copyinto() <= Copies memory into a specific location in scratch 1423 * copyinstr() <= Copies a string into a specific location in scratch 1424 * 1425 * Helper actions may only access the following built-in variables: 1426 * 1427 * curthread <= Current kthread_t pointer 1428 * tid <= Current thread identifier 1429 * pid <= Current process identifier 1430 * ppid <= Parent process identifier 1431 * uid <= Current user ID 1432 * gid <= Current group ID 1433 * execname <= Current executable name 1434 * zonename <= Current zone name 1435 * 1436 * Helper actions may not manipulate or allocate dynamic variables, but they 1437 * may have clause-local and statically-allocated global variables. The 1438 * helper action variable state is specific to the helper action -- variables 1439 * used by the helper action may not be accessed outside of the helper 1440 * action, and the helper action may not access variables that like outside 1441 * of it. Helper actions may not load from kernel memory at-large; they are 1442 * restricting to loading current user state (via copyin() and variants) and 1443 * scratch space. As with probe enablings, helper actions are executed in 1444 * program order. The result of the helper action is the result of the last 1445 * executing helper expression. 1446 * 1447 * Helpers -- composed of either providers/probes or probes/actions (or both) 1448 * -- are added by opening the "helper" minor node, and issuing an ioctl(2) 1449 * (DTRACEHIOC_ADDDOF) that specifies the dof_helper_t structure. This 1450 * encapsulates the name and base address of the user-level library or 1451 * executable publishing the helpers and probes as well as the DOF that 1452 * contains the definitions of those helpers and probes. 1453 * 1454 * The DTRACEHIOC_ADD and DTRACEHIOC_REMOVE are left in place for legacy 1455 * helpers and should no longer be used. No other ioctls are valid on the 1456 * helper minor node. 1457 */ 1458#if !defined(__APPLE__) 1459#define DTRACEHIOC (('d' << 24) | ('t' << 16) | ('h' << 8)) 1460#define DTRACEHIOC_ADD (DTRACEHIOC | 1) /* add helper */ 1461#define DTRACEHIOC_REMOVE (DTRACEHIOC | 2) /* remove helper */ 1462#define DTRACEHIOC_ADDDOF (DTRACEHIOC | 3) /* add helper DOF */ 1463#else 1464#define DTRACEHIOC_REMOVE _IO('h', 2) /* remove helper */ 1465#define DTRACEHIOC_ADDDOF _IOW('h', 4, user_addr_t) /* add helper DOF */ 1466#endif /* __APPLE__ */ 1467 1468typedef struct dof_helper { 1469 char dofhp_mod[DTRACE_MODNAMELEN]; /* executable or library name */ 1470 uint64_t dofhp_addr; /* base address of object */ 1471 uint64_t dofhp_dof; /* address of helper DOF */ 1472} dof_helper_t; 1473 1474#if defined(__APPLE__) 1475/* 1476 * This structure is used to register one or more dof_helper_t(s). 1477 * For counts greater than one, malloc the structure as if the 1478 * dofiod_helpers field was "count" sized. The kernel will copyin 1479 * data of size: 1480 * 1481 * sizeof(dof_ioctl_data_t) + ((count - 1) * sizeof(dof_helper_t)) 1482 */ 1483typedef struct dof_ioctl_data { 1484 /* 1485 * This field must be 64 bits to keep the alignment the same 1486 * when 64 bit user procs are sending data to 32 bit xnu 1487 */ 1488 uint64_t dofiod_count; 1489 dof_helper_t dofiod_helpers[1]; 1490} dof_ioctl_data_t; 1491 1492#define DOF_IOCTL_DATA_T_SIZE(count) (sizeof(dof_ioctl_data_t) + ((count - 1) * sizeof(dof_helper_t))) 1493 1494#endif 1495 1496#define DTRACEMNR_DTRACE "dtrace" /* node for DTrace ops */ 1497#if !defined(__APPLE__) 1498#define DTRACEMNR_HELPER "helper" /* node for helpers */ 1499#else 1500#define DTRACEMNR_HELPER "dtracehelper" /* node for helpers */ 1501#endif /* __APPLE__ */ 1502#define DTRACEMNRN_DTRACE 0 /* minor for DTrace ops */ 1503#define DTRACEMNRN_HELPER 1 /* minor for helpers */ 1504#define DTRACEMNRN_CLONE 2 /* first clone minor */ 1505 1506#ifdef _KERNEL 1507 1508/* 1509 * DTrace Provider API 1510 * 1511 * The following functions are implemented by the DTrace framework and are 1512 * used to implement separate in-kernel DTrace providers. Common functions 1513 * are provided in uts/common/os/dtrace.c. ISA-dependent subroutines are 1514 * defined in uts/<isa>/dtrace/dtrace_asm.s or uts/<isa>/dtrace/dtrace_isa.c. 1515 * 1516 * The provider API has two halves: the API that the providers consume from 1517 * DTrace, and the API that providers make available to DTrace. 1518 * 1519 * 1 Framework-to-Provider API 1520 * 1521 * 1.1 Overview 1522 * 1523 * The Framework-to-Provider API is represented by the dtrace_pops structure 1524 * that the provider passes to the framework when registering itself. This 1525 * structure consists of the following members: 1526 * 1527 * dtps_provide() <-- Provide all probes, all modules 1528 * dtps_provide_module() <-- Provide all probes in specified module 1529 * dtps_enable() <-- Enable specified probe 1530 * dtps_disable() <-- Disable specified probe 1531 * dtps_suspend() <-- Suspend specified probe 1532 * dtps_resume() <-- Resume specified probe 1533 * dtps_getargdesc() <-- Get the argument description for args[X] 1534 * dtps_getargval() <-- Get the value for an argX or args[X] variable 1535 * dtps_usermode() <-- Find out if the probe was fired in user mode 1536 * dtps_destroy() <-- Destroy all state associated with this probe 1537 * 1538 * 1.2 void dtps_provide(void *arg, const dtrace_probedesc_t *spec) 1539 * 1540 * 1.2.1 Overview 1541 * 1542 * Called to indicate that the provider should provide all probes. If the 1543 * specified description is non-NULL, dtps_provide() is being called because 1544 * no probe matched a specified probe -- if the provider has the ability to 1545 * create custom probes, it may wish to create a probe that matches the 1546 * specified description. 1547 * 1548 * 1.2.2 Arguments and notes 1549 * 1550 * The first argument is the cookie as passed to dtrace_register(). The 1551 * second argument is a pointer to a probe description that the provider may 1552 * wish to consider when creating custom probes. The provider is expected to 1553 * call back into the DTrace framework via dtrace_probe_create() to create 1554 * any necessary probes. dtps_provide() may be called even if the provider 1555 * has made available all probes; the provider should check the return value 1556 * of dtrace_probe_create() to handle this case. Note that the provider need 1557 * not implement both dtps_provide() and dtps_provide_module(); see 1558 * "Arguments and Notes" for dtrace_register(), below. 1559 * 1560 * 1.2.3 Return value 1561 * 1562 * None. 1563 * 1564 * 1.2.4 Caller's context 1565 * 1566 * dtps_provide() is typically called from open() or ioctl() context, but may 1567 * be called from other contexts as well. The DTrace framework is locked in 1568 * such a way that providers may not register or unregister. This means that 1569 * the provider may not call any DTrace API that affects its registration with 1570 * the framework, including dtrace_register(), dtrace_unregister(), 1571 * dtrace_invalidate(), and dtrace_condense(). However, the context is such 1572 * that the provider may (and indeed, is expected to) call probe-related 1573 * DTrace routines, including dtrace_probe_create(), dtrace_probe_lookup(), 1574 * and dtrace_probe_arg(). 1575 * 1576 * 1.3 void dtps_provide_module(void *arg, struct modctl *mp) 1577 * 1578 * 1.3.1 Overview 1579 * 1580 * Called to indicate that the provider should provide all probes in the 1581 * specified module. 1582 * 1583 * 1.3.2 Arguments and notes 1584 * 1585 * The first argument is the cookie as passed to dtrace_register(). The 1586 * second argument is a pointer to a modctl structure that indicates the 1587 * module for which probes should be created. 1588 * 1589 * 1.3.3 Return value 1590 * 1591 * None. 1592 * 1593 * 1.3.4 Caller's context 1594 * 1595 * dtps_provide_module() may be called from open() or ioctl() context, but 1596 * may also be called from a module loading context. mod_lock is held, and 1597 * the DTrace framework is locked in such a way that providers may not 1598 * register or unregister. This means that the provider may not call any 1599 * DTrace API that affects its registration with the framework, including 1600 * dtrace_register(), dtrace_unregister(), dtrace_invalidate(), and 1601 * dtrace_condense(). However, the context is such that the provider may (and 1602 * indeed, is expected to) call probe-related DTrace routines, including 1603 * dtrace_probe_create(), dtrace_probe_lookup(), and dtrace_probe_arg(). Note 1604 * that the provider need not implement both dtps_provide() and 1605 * dtps_provide_module(); see "Arguments and Notes" for dtrace_register(), 1606 * below. 1607 * 1608 * 1.4 int dtps_enable(void *arg, dtrace_id_t id, void *parg) 1609 * 1610 * 1.4.1 Overview 1611 * 1612 * Called to enable the specified probe. 1613 * 1614 * 1.4.2 Arguments and notes 1615 * 1616 * The first argument is the cookie as passed to dtrace_register(). The 1617 * second argument is the identifier of the probe to be enabled. The third 1618 * argument is the probe argument as passed to dtrace_probe_create(). 1619 * dtps_enable() will be called when a probe transitions from not being 1620 * enabled at all to having one or more ECB. The number of ECBs associated 1621 * with the probe may change without subsequent calls into the provider. 1622 * When the number of ECBs drops to zero, the provider will be explicitly 1623 * told to disable the probe via dtps_disable(). dtrace_probe() should never 1624 * be called for a probe identifier that hasn't been explicitly enabled via 1625 * dtps_enable(). 1626 * 1627 * 1.4.3 Return value 1628 * 1629 * On success, dtps_enable() should return 0. On failure, -1 should be 1630 * returned. 1631 * 1632 * 1.4.4 Caller's context 1633 * 1634 * The DTrace framework is locked in such a way that it may not be called 1635 * back into at all. cpu_lock is held. mod_lock is not held and may not 1636 * be acquired. 1637 * 1638 * 1.5 void dtps_disable(void *arg, dtrace_id_t id, void *parg) 1639 * 1640 * 1.5.1 Overview 1641 * 1642 * Called to disable the specified probe. 1643 * 1644 * 1.5.2 Arguments and notes 1645 * 1646 * The first argument is the cookie as passed to dtrace_register(). The 1647 * second argument is the identifier of the probe to be disabled. The third 1648 * argument is the probe argument as passed to dtrace_probe_create(). 1649 * dtps_disable() will be called when a probe transitions from being enabled 1650 * to having zero ECBs. dtrace_probe() should never be called for a probe 1651 * identifier that has been explicitly enabled via dtps_disable(). 1652 * 1653 * 1.5.3 Return value 1654 * 1655 * None. 1656 * 1657 * 1.5.4 Caller's context 1658 * 1659 * The DTrace framework is locked in such a way that it may not be called 1660 * back into at all. cpu_lock is held. mod_lock is not held and may not 1661 * be acquired. 1662 * 1663 * 1.6 void dtps_suspend(void *arg, dtrace_id_t id, void *parg) 1664 * 1665 * 1.6.1 Overview 1666 * 1667 * Called to suspend the specified enabled probe. This entry point is for 1668 * providers that may need to suspend some or all of their probes when CPUs 1669 * are being powered on or when the boot monitor is being entered for a 1670 * prolonged period of time. 1671 * 1672 * 1.6.2 Arguments and notes 1673 * 1674 * The first argument is the cookie as passed to dtrace_register(). The 1675 * second argument is the identifier of the probe to be suspended. The 1676 * third argument is the probe argument as passed to dtrace_probe_create(). 1677 * dtps_suspend will only be called on an enabled probe. Providers that 1678 * provide a dtps_suspend entry point will want to take roughly the action 1679 * that it takes for dtps_disable. 1680 * 1681 * 1.6.3 Return value 1682 * 1683 * None. 1684 * 1685 * 1.6.4 Caller's context 1686 * 1687 * Interrupts are disabled. The DTrace framework is in a state such that the 1688 * specified probe cannot be disabled or destroyed for the duration of 1689 * dtps_suspend(). As interrupts are disabled, the provider is afforded 1690 * little latitude; the provider is expected to do no more than a store to 1691 * memory. 1692 * 1693 * 1.7 void dtps_resume(void *arg, dtrace_id_t id, void *parg) 1694 * 1695 * 1.7.1 Overview 1696 * 1697 * Called to resume the specified enabled probe. This entry point is for 1698 * providers that may need to resume some or all of their probes after the 1699 * completion of an event that induced a call to dtps_suspend(). 1700 * 1701 * 1.7.2 Arguments and notes 1702 * 1703 * The first argument is the cookie as passed to dtrace_register(). The 1704 * second argument is the identifier of the probe to be resumed. The 1705 * third argument is the probe argument as passed to dtrace_probe_create(). 1706 * dtps_resume will only be called on an enabled probe. Providers that 1707 * provide a dtps_resume entry point will want to take roughly the action 1708 * that it takes for dtps_enable. 1709 * 1710 * 1.7.3 Return value 1711 * 1712 * None. 1713 * 1714 * 1.7.4 Caller's context 1715 * 1716 * Interrupts are disabled. The DTrace framework is in a state such that the 1717 * specified probe cannot be disabled or destroyed for the duration of 1718 * dtps_resume(). As interrupts are disabled, the provider is afforded 1719 * little latitude; the provider is expected to do no more than a store to 1720 * memory. 1721 * 1722 * 1.8 void dtps_getargdesc(void *arg, dtrace_id_t id, void *parg, 1723 * dtrace_argdesc_t *desc) 1724 * 1725 * 1.8.1 Overview 1726 * 1727 * Called to retrieve the argument description for an args[X] variable. 1728 * 1729 * 1.8.2 Arguments and notes 1730 * 1731 * The first argument is the cookie as passed to dtrace_register(). The 1732 * second argument is the identifier of the current probe. The third 1733 * argument is the probe argument as passed to dtrace_probe_create(). The 1734 * fourth argument is a pointer to the argument description. This 1735 * description is both an input and output parameter: it contains the 1736 * index of the desired argument in the dtargd_ndx field, and expects 1737 * the other fields to be filled in upon return. If there is no argument 1738 * corresponding to the specified index, the dtargd_ndx field should be set 1739 * to DTRACE_ARGNONE. 1740 * 1741 * 1.8.3 Return value 1742 * 1743 * None. The dtargd_ndx, dtargd_native, dtargd_xlate and dtargd_mapping 1744 * members of the dtrace_argdesc_t structure are all output values. 1745 * 1746 * 1.8.4 Caller's context 1747 * 1748 * dtps_getargdesc() is called from ioctl() context. mod_lock is held, and 1749 * the DTrace framework is locked in such a way that providers may not 1750 * register or unregister. This means that the provider may not call any 1751 * DTrace API that affects its registration with the framework, including 1752 * dtrace_register(), dtrace_unregister(), dtrace_invalidate(), and 1753 * dtrace_condense(). 1754 * 1755 * 1.9 uint64_t dtps_getargval(void *arg, dtrace_id_t id, void *parg, 1756 * int argno, int aframes) 1757 * 1758 * 1.9.1 Overview 1759 * 1760 * Called to retrieve a value for an argX or args[X] variable. 1761 * 1762 * 1.9.2 Arguments and notes 1763 * 1764 * The first argument is the cookie as passed to dtrace_register(). The 1765 * second argument is the identifier of the current probe. The third 1766 * argument is the probe argument as passed to dtrace_probe_create(). The 1767 * fourth argument is the number of the argument (the X in the example in 1768 * 1.9.1). The fifth argument is the number of stack frames that were used 1769 * to get from the actual place in the code that fired the probe to 1770 * dtrace_probe() itself, the so-called artificial frames. This argument may 1771 * be used to descend an appropriate number of frames to find the correct 1772 * values. If this entry point is left NULL, the dtrace_getarg() built-in 1773 * function is used. 1774 * 1775 * 1.9.3 Return value 1776 * 1777 * The value of the argument. 1778 * 1779 * 1.9.4 Caller's context 1780 * 1781 * This is called from within dtrace_probe() meaning that interrupts 1782 * are disabled. No locks should be taken within this entry point. 1783 * 1784 * 1.10 int dtps_usermode(void *arg, dtrace_id_t id, void *parg) 1785 * 1786 * 1.10.1 Overview 1787 * 1788 * Called to determine if the probe was fired in a user context. 1789 * 1790 * 1.10.2 Arguments and notes 1791 * 1792 * The first argument is the cookie as passed to dtrace_register(). The 1793 * second argument is the identifier of the current probe. The third 1794 * argument is the probe argument as passed to dtrace_probe_create(). This 1795 * entry point must not be left NULL for providers whose probes allow for 1796 * mixed mode tracing, that is to say those probes that can fire during 1797 * kernel- _or_ user-mode execution 1798 * 1799 * 1.10.3 Return value 1800 * 1801 * A boolean value. 1802 * 1803 * 1.10.4 Caller's context 1804 * 1805 * This is called from within dtrace_probe() meaning that interrupts 1806 * are disabled. No locks should be taken within this entry point. 1807 * 1808 * 1.11 void dtps_destroy(void *arg, dtrace_id_t id, void *parg) 1809 * 1810 * 1.11.1 Overview 1811 * 1812 * Called to destroy the specified probe. 1813 * 1814 * 1.11.2 Arguments and notes 1815 * 1816 * The first argument is the cookie as passed to dtrace_register(). The 1817 * second argument is the identifier of the probe to be destroyed. The third 1818 * argument is the probe argument as passed to dtrace_probe_create(). The 1819 * provider should free all state associated with the probe. The framework 1820 * guarantees that dtps_destroy() is only called for probes that have either 1821 * been disabled via dtps_disable() or were never enabled via dtps_enable(). 1822 * Once dtps_disable() has been called for a probe, no further call will be 1823 * made specifying the probe. 1824 * 1825 * 1.11.3 Return value 1826 * 1827 * None. 1828 * 1829 * 1.11.4 Caller's context 1830 * 1831 * The DTrace framework is locked in such a way that it may not be called 1832 * back into at all. mod_lock is held. cpu_lock is not held, and may not be 1833 * acquired. 1834 * 1835 * 1836 * 2 Provider-to-Framework API 1837 * 1838 * 2.1 Overview 1839 * 1840 * The Provider-to-Framework API provides the mechanism for the provider to 1841 * register itself with the DTrace framework, to create probes, to lookup 1842 * probes and (most importantly) to fire probes. The Provider-to-Framework 1843 * consists of: 1844 * 1845 * dtrace_register() <-- Register a provider with the DTrace framework 1846 * dtrace_unregister() <-- Remove a provider's DTrace registration 1847 * dtrace_invalidate() <-- Invalidate the specified provider 1848 * dtrace_condense() <-- Remove a provider's unenabled probes 1849 * dtrace_attached() <-- Indicates whether or not DTrace has attached 1850 * dtrace_probe_create() <-- Create a DTrace probe 1851 * dtrace_probe_lookup() <-- Lookup a DTrace probe based on its name 1852 * dtrace_probe_arg() <-- Return the probe argument for a specific probe 1853 * dtrace_probe() <-- Fire the specified probe 1854 * 1855 * 2.2 int dtrace_register(const char *name, const dtrace_pattr_t *pap, 1856 * uint32_t priv, cred_t *cr, const dtrace_pops_t *pops, void *arg, 1857 * dtrace_provider_id_t *idp) 1858 * 1859 * 2.2.1 Overview 1860 * 1861 * dtrace_register() registers the calling provider with the DTrace 1862 * framework. It should generally be called by DTrace providers in their 1863 * attach(9E) entry point. 1864 * 1865 * 2.2.2 Arguments and Notes 1866 * 1867 * The first argument is the name of the provider. The second argument is a 1868 * pointer to the stability attributes for the provider. The third argument 1869 * is the privilege flags for the provider, and must be some combination of: 1870 * 1871 * DTRACE_PRIV_NONE <= All users may enable probes from this provider 1872 * 1873 * DTRACE_PRIV_PROC <= Any user with privilege of PRIV_DTRACE_PROC may 1874 * enable probes from this provider 1875 * 1876 * DTRACE_PRIV_USER <= Any user with privilege of PRIV_DTRACE_USER may 1877 * enable probes from this provider 1878 * 1879 * DTRACE_PRIV_KERNEL <= Any user with privilege of PRIV_DTRACE_KERNEL 1880 * may enable probes from this provider 1881 * 1882 * DTRACE_PRIV_OWNER <= This flag places an additional constraint on 1883 * the privilege requirements above. These probes 1884 * require either (a) a user ID matching the user 1885 * ID of the cred passed in the fourth argument 1886 * or (b) the PRIV_PROC_OWNER privilege. 1887 * 1888 * DTRACE_PRIV_ZONEOWNER<= This flag places an additional constraint on 1889 * the privilege requirements above. These probes 1890 * require either (a) a zone ID matching the zone 1891 * ID of the cred passed in the fourth argument 1892 * or (b) the PRIV_PROC_ZONE privilege. 1893 * 1894 * Note that these flags designate the _visibility_ of the probes, not 1895 * the conditions under which they may or may not fire. 1896 * 1897 * The fourth argument is the credential that is associated with the 1898 * provider. This argument should be NULL if the privilege flags don't 1899 * include DTRACE_PRIV_OWNER or DTRACE_PRIV_ZONEOWNER. If non-NULL, the 1900 * framework stashes the uid and zoneid represented by this credential 1901 * for use at probe-time, in implicit predicates. These limit visibility 1902 * of the probes to users and/or zones which have sufficient privilege to 1903 * access them. 1904 * 1905 * The fifth argument is a DTrace provider operations vector, which provides 1906 * the implementation for the Framework-to-Provider API. (See Section 1, 1907 * above.) This must be non-NULL, and each member must be non-NULL. The 1908 * exceptions to this are (1) the dtps_provide() and dtps_provide_module() 1909 * members (if the provider so desires, _one_ of these members may be left 1910 * NULL -- denoting that the provider only implements the other) and (2) 1911 * the dtps_suspend() and dtps_resume() members, which must either both be 1912 * NULL or both be non-NULL. 1913 * 1914 * The sixth argument is a cookie to be specified as the first argument for 1915 * each function in the Framework-to-Provider API. This argument may have 1916 * any value. 1917 * 1918 * The final argument is a pointer to dtrace_provider_id_t. If 1919 * dtrace_register() successfully completes, the provider identifier will be 1920 * stored in the memory pointed to be this argument. This argument must be 1921 * non-NULL. 1922 * 1923 * 2.2.3 Return value 1924 * 1925 * On success, dtrace_register() returns 0 and stores the new provider's 1926 * identifier into the memory pointed to by the idp argument. On failure, 1927 * dtrace_register() returns an errno: 1928 * 1929 * EINVAL The arguments passed to dtrace_register() were somehow invalid. 1930 * This may because a parameter that must be non-NULL was NULL, 1931 * because the name was invalid (either empty or an illegal 1932 * provider name) or because the attributes were invalid. 1933 * 1934 * No other failure code is returned. 1935 * 1936 * 2.2.4 Caller's context 1937 * 1938 * dtrace_register() may induce calls to dtrace_provide(); the provider must 1939 * hold no locks across dtrace_register() that may also be acquired by 1940 * dtrace_provide(). cpu_lock and mod_lock must not be held. 1941 * 1942 * 2.3 int dtrace_unregister(dtrace_provider_t id) 1943 * 1944 * 2.3.1 Overview 1945 * 1946 * Unregisters the specified provider from the DTrace framework. It should 1947 * generally be called by DTrace providers in their detach(9E) entry point. 1948 * 1949 * 2.3.2 Arguments and Notes 1950 * 1951 * The only argument is the provider identifier, as returned from a 1952 * successful call to dtrace_register(). As a result of calling 1953 * dtrace_unregister(), the DTrace framework will call back into the provider 1954 * via the dtps_destroy() entry point. Once dtrace_unregister() successfully 1955 * completes, however, the DTrace framework will no longer make calls through 1956 * the Framework-to-Provider API. 1957 * 1958 * 2.3.3 Return value 1959 * 1960 * On success, dtrace_unregister returns 0. On failure, dtrace_unregister() 1961 * returns an errno: 1962 * 1963 * EBUSY There are currently processes that have the DTrace pseudodevice 1964 * open, or there exists an anonymous enabling that hasn't yet 1965 * been claimed. 1966 * 1967 * No other failure code is returned. 1968 * 1969 * 2.3.4 Caller's context 1970 * 1971 * Because a call to dtrace_unregister() may induce calls through the 1972 * Framework-to-Provider API, the caller may not hold any lock across 1973 * dtrace_register() that is also acquired in any of the Framework-to- 1974 * Provider API functions. Additionally, mod_lock may not be held. 1975 * 1976 * 2.4 void dtrace_invalidate(dtrace_provider_id_t id) 1977 * 1978 * 2.4.1 Overview 1979 * 1980 * Invalidates the specified provider. All subsequent probe lookups for the 1981 * specified provider will fail, but its probes will not be removed. 1982 * 1983 * 2.4.2 Arguments and note 1984 * 1985 * The only argument is the provider identifier, as returned from a 1986 * successful call to dtrace_register(). In general, a provider's probes 1987 * always remain valid; dtrace_invalidate() is a mechanism for invalidating 1988 * an entire provider, regardless of whether or not probes are enabled or 1989 * not. Note that dtrace_invalidate() will _not_ prevent already enabled 1990 * probes from firing -- it will merely prevent any new enablings of the 1991 * provider's probes. 1992 * 1993 * 2.5 int dtrace_condense(dtrace_provider_id_t id) 1994 * 1995 * 2.5.1 Overview 1996 * 1997 * Removes all the unenabled probes for the given provider. This function is 1998 * not unlike dtrace_unregister(), except that it doesn't remove the 1999 * provider just as many of its associated probes as it can. 2000 * 2001 * 2.5.2 Arguments and Notes 2002 * 2003 * As with dtrace_unregister(), the sole argument is the provider identifier 2004 * as returned from a successful call to dtrace_register(). As a result of 2005 * calling dtrace_condense(), the DTrace framework will call back into the 2006 * given provider's dtps_destroy() entry point for each of the provider's 2007 * unenabled probes. 2008 * 2009 * 2.5.3 Return value 2010 * 2011 * Currently, dtrace_condense() always returns 0. However, consumers of this 2012 * function should check the return value as appropriate; its behavior may 2013 * change in the future. 2014 * 2015 * 2.5.4 Caller's context 2016 * 2017 * As with dtrace_unregister(), the caller may not hold any lock across 2018 * dtrace_condense() that is also acquired in the provider's entry points. 2019 * Also, mod_lock may not be held. 2020 * 2021 * 2.6 int dtrace_attached() 2022 * 2023 * 2.6.1 Overview 2024 * 2025 * Indicates whether or not DTrace has attached. 2026 * 2027 * 2.6.2 Arguments and Notes 2028 * 2029 * For most providers, DTrace makes initial contact beyond registration. 2030 * That is, once a provider has registered with DTrace, it waits to hear 2031 * from DTrace to create probes. However, some providers may wish to 2032 * proactively create probes without first being told by DTrace to do so. 2033 * If providers wish to do this, they must first call dtrace_attached() to 2034 * determine if DTrace itself has attached. If dtrace_attached() returns 0, 2035 * the provider must not make any other Provider-to-Framework API call. 2036 * 2037 * 2.6.3 Return value 2038 * 2039 * dtrace_attached() returns 1 if DTrace has attached, 0 otherwise. 2040 * 2041 * 2.7 int dtrace_probe_create(dtrace_provider_t id, const char *mod, 2042 * const char *func, const char *name, int aframes, void *arg) 2043 * 2044 * 2.7.1 Overview 2045 * 2046 * Creates a probe with specified module name, function name, and name. 2047 * 2048 * 2.7.2 Arguments and Notes 2049 * 2050 * The first argument is the provider identifier, as returned from a 2051 * successful call to dtrace_register(). The second, third, and fourth 2052 * arguments are the module name, function name, and probe name, 2053 * respectively. Of these, module name and function name may both be NULL 2054 * (in which case the probe is considered to be unanchored), or they may both 2055 * be non-NULL. The name must be non-NULL, and must point to a non-empty 2056 * string. 2057 * 2058 * The fifth argument is the number of artificial stack frames that will be 2059 * found on the stack when dtrace_probe() is called for the new probe. These 2060 * artificial frames will be automatically be pruned should the stack() or 2061 * stackdepth() functions be called as part of one of the probe's ECBs. If 2062 * the parameter doesn't add an artificial frame, this parameter should be 2063 * zero. 2064 * 2065 * The final argument is a probe argument that will be passed back to the 2066 * provider when a probe-specific operation is called. (e.g., via 2067 * dtps_enable(), dtps_disable(), etc.) 2068 * 2069 * Note that it is up to the provider to be sure that the probe that it 2070 * creates does not already exist -- if the provider is unsure of the probe's 2071 * existence, it should assure its absence with dtrace_probe_lookup() before 2072 * calling dtrace_probe_create(). 2073 * 2074 * 2.7.3 Return value 2075 * 2076 * dtrace_probe_create() always succeeds, and always returns the identifier 2077 * of the newly-created probe. 2078 * 2079 * 2.7.4 Caller's context 2080 * 2081 * While dtrace_probe_create() is generally expected to be called from 2082 * dtps_provide() and/or dtps_provide_module(), it may be called from other 2083 * non-DTrace contexts. Neither cpu_lock nor mod_lock may be held. 2084 * 2085 * 2.8 dtrace_id_t dtrace_probe_lookup(dtrace_provider_t id, const char *mod, 2086 * const char *func, const char *name) 2087 * 2088 * 2.8.1 Overview 2089 * 2090 * Looks up a probe based on provdider and one or more of module name, 2091 * function name and probe name. 2092 * 2093 * 2.8.2 Arguments and Notes 2094 * 2095 * The first argument is the provider identifier, as returned from a 2096 * successful call to dtrace_register(). The second, third, and fourth 2097 * arguments are the module name, function name, and probe name, 2098 * respectively. Any of these may be NULL; dtrace_probe_lookup() will return 2099 * the identifier of the first probe that is provided by the specified 2100 * provider and matches all of the non-NULL matching criteria. 2101 * dtrace_probe_lookup() is generally used by a provider to be check the 2102 * existence of a probe before creating it with dtrace_probe_create(). 2103 * 2104 * 2.8.3 Return value 2105 * 2106 * If the probe exists, returns its identifier. If the probe does not exist, 2107 * return DTRACE_IDNONE. 2108 * 2109 * 2.8.4 Caller's context 2110 * 2111 * While dtrace_probe_lookup() is generally expected to be called from 2112 * dtps_provide() and/or dtps_provide_module(), it may also be called from 2113 * other non-DTrace contexts. Neither cpu_lock nor mod_lock may be held. 2114 * 2115 * 2.9 void *dtrace_probe_arg(dtrace_provider_t id, dtrace_id_t probe) 2116 * 2117 * 2.9.1 Overview 2118 * 2119 * Returns the probe argument associated with the specified probe. 2120 * 2121 * 2.9.2 Arguments and Notes 2122 * 2123 * The first argument is the provider identifier, as returned from a 2124 * successful call to dtrace_register(). The second argument is a probe 2125 * identifier, as returned from dtrace_probe_lookup() or 2126 * dtrace_probe_create(). This is useful if a probe has multiple 2127 * provider-specific components to it: the provider can create the probe 2128 * once with provider-specific state, and then add to the state by looking 2129 * up the probe based on probe identifier. 2130 * 2131 * 2.9.3 Return value 2132 * 2133 * Returns the argument associated with the specified probe. If the 2134 * specified probe does not exist, or if the specified probe is not provided 2135 * by the specified provider, NULL is returned. 2136 * 2137 * 2.9.4 Caller's context 2138 * 2139 * While dtrace_probe_arg() is generally expected to be called from 2140 * dtps_provide() and/or dtps_provide_module(), it may also be called from 2141 * other non-DTrace contexts. Neither cpu_lock nor mod_lock may be held. 2142 * 2143 * 2.10 void dtrace_probe(dtrace_id_t probe, uintptr_t arg0, uintptr_t arg1, 2144 * uintptr_t arg2, uintptr_t arg3, uintptr_t arg4) 2145 * 2146 * 2.10.1 Overview 2147 * 2148 * The epicenter of DTrace: fires the specified probes with the specified 2149 * arguments. 2150 * 2151 * 2.10.2 Arguments and Notes 2152 * 2153 * The first argument is a probe identifier as returned by 2154 * dtrace_probe_create() or dtrace_probe_lookup(). The second through sixth 2155 * arguments are the values to which the D variables "arg0" through "arg4" 2156 * will be mapped. 2157 * 2158 * dtrace_probe() should be called whenever the specified probe has fired -- 2159 * however the provider defines it. 2160 * 2161 * 2.10.3 Return value 2162 * 2163 * None. 2164 * 2165 * 2.10.4 Caller's context 2166 * 2167 * dtrace_probe() may be called in virtually any context: kernel, user, 2168 * interrupt, high-level interrupt, with arbitrary adaptive locks held, with 2169 * dispatcher locks held, with interrupts disabled, etc. The only latitude 2170 * that must be afforded to DTrace is the ability to make calls within 2171 * itself (and to its in-kernel subroutines) and the ability to access 2172 * arbitrary (but mapped) memory. On some platforms, this constrains 2173 * context. For example, on UltraSPARC, dtrace_probe() cannot be called 2174 * from any context in which TL is greater than zero. dtrace_probe() may 2175 * also not be called from any routine which may be called by dtrace_probe() 2176 * -- which includes functions in the DTrace framework and some in-kernel 2177 * DTrace subroutines. All such functions "dtrace_"; providers that 2178 * instrument the kernel arbitrarily should be sure to not instrument these 2179 * routines. 2180 */ 2181typedef struct dtrace_pops { 2182 void (*dtps_provide)(void *arg, const dtrace_probedesc_t *spec); 2183 void (*dtps_provide_module)(void *arg, struct modctl *mp); 2184 int (*dtps_enable)(void *arg, dtrace_id_t id, void *parg); 2185 void (*dtps_disable)(void *arg, dtrace_id_t id, void *parg); 2186 void (*dtps_suspend)(void *arg, dtrace_id_t id, void *parg); 2187 void (*dtps_resume)(void *arg, dtrace_id_t id, void *parg); 2188 void (*dtps_getargdesc)(void *arg, dtrace_id_t id, void *parg, 2189 dtrace_argdesc_t *desc); 2190 uint64_t (*dtps_getargval)(void *arg, dtrace_id_t id, void *parg, 2191 int argno, int aframes); 2192 int (*dtps_usermode)(void *arg, dtrace_id_t id, void *parg); 2193 void (*dtps_destroy)(void *arg, dtrace_id_t id, void *parg); 2194} dtrace_pops_t; 2195 2196typedef uintptr_t dtrace_provider_id_t; 2197 2198extern int dtrace_register(const char *, const dtrace_pattr_t *, uint32_t, 2199 cred_t *, const dtrace_pops_t *, void *, dtrace_provider_id_t *); 2200extern int dtrace_unregister(dtrace_provider_id_t); 2201extern int dtrace_condense(dtrace_provider_id_t); 2202extern void dtrace_invalidate(dtrace_provider_id_t); 2203extern dtrace_id_t dtrace_probe_lookup(dtrace_provider_id_t, const char *, 2204 const char *, const char *); 2205extern dtrace_id_t dtrace_probe_create(dtrace_provider_id_t, const char *, 2206 const char *, const char *, int, void *); 2207extern void *dtrace_probe_arg(dtrace_provider_id_t, dtrace_id_t); 2208#if !defined(__APPLE__) 2209extern void dtrace_probe(dtrace_id_t, uintptr_t arg0, uintptr_t arg1, 2210 uintptr_t arg2, uintptr_t arg3, uintptr_t arg4); 2211#else 2212extern void dtrace_probe(dtrace_id_t, uint64_t arg0, uint64_t arg1, 2213 uint64_t arg2, uint64_t arg3, uint64_t arg4); 2214#endif /* __APPLE__ */ 2215 2216/* 2217 * DTrace Meta Provider API 2218 * 2219 * The following functions are implemented by the DTrace framework and are 2220 * used to implement meta providers. Meta providers plug into the DTrace 2221 * framework and are used to instantiate new providers on the fly. At 2222 * present, there is only one type of meta provider and only one meta 2223 * provider may be registered with the DTrace framework at a time. The 2224 * sole meta provider type provides user-land static tracing facilities 2225 * by taking meta probe descriptions and adding a corresponding provider 2226 * into the DTrace framework. 2227 * 2228 * 1 Framework-to-Provider 2229 * 2230 * 1.1 Overview 2231 * 2232 * The Framework-to-Provider API is represented by the dtrace_mops structure 2233 * that the meta provider passes to the framework when registering itself as 2234 * a meta provider. This structure consists of the following members: 2235 * 2236 * dtms_create_probe() <-- Add a new probe to a created provider 2237 * dtms_provide_pid() <-- Create a new provider for a given process 2238 * dtms_remove_pid() <-- Remove a previously created provider 2239 * 2240 * 1.2 void dtms_create_probe(void *arg, void *parg, 2241 * dtrace_helper_probedesc_t *probedesc); 2242 * 2243 * 1.2.1 Overview 2244 * 2245 * Called by the DTrace framework to create a new probe in a provider 2246 * created by this meta provider. 2247 * 2248 * 1.2.2 Arguments and notes 2249 * 2250 * The first argument is the cookie as passed to dtrace_meta_register(). 2251 * The second argument is the provider cookie for the associated provider; 2252 * this is obtained from the return value of dtms_provide_pid(). The third 2253 * argument is the helper probe description. 2254 * 2255 * 1.2.3 Return value 2256 * 2257 * None 2258 * 2259 * 1.2.4 Caller's context 2260 * 2261 * dtms_create_probe() is called from either ioctl() or module load context. 2262 * The DTrace framework is locked in such a way that meta providers may not 2263 * register or unregister. This means that the meta provider cannot call 2264 * dtrace_meta_register() or dtrace_meta_unregister(). However, the context is 2265 * such that the provider may (and is expected to) call provider-related 2266 * DTrace provider APIs including dtrace_probe_create(). 2267 * 2268 * 1.3 void *dtms_provide_pid(void *arg, dtrace_meta_provider_t *mprov, 2269 * pid_t pid) 2270 * 2271 * 1.3.1 Overview 2272 * 2273 * Called by the DTrace framework to instantiate a new provider given the 2274 * description of the provider and probes in the mprov argument. The 2275 * meta provider should call dtrace_register() to insert the new provider 2276 * into the DTrace framework. 2277 * 2278 * 1.3.2 Arguments and notes 2279 * 2280 * The first argument is the cookie as passed to dtrace_meta_register(). 2281 * The second argument is a pointer to a structure describing the new 2282 * helper provider. The third argument is the process identifier for 2283 * process associated with this new provider. Note that the name of the 2284 * provider as passed to dtrace_register() should be the contatenation of 2285 * the dtmpb_provname member of the mprov argument and the processs 2286 * identifier as a string. 2287 * 2288 * 1.3.3 Return value 2289 * 2290 * The cookie for the provider that the meta provider creates. This is 2291 * the same value that it passed to dtrace_register(). 2292 * 2293 * 1.3.4 Caller's context 2294 * 2295 * dtms_provide_pid() is called from either ioctl() or module load context. 2296 * The DTrace framework is locked in such a way that meta providers may not 2297 * register or unregister. This means that the meta provider cannot call 2298 * dtrace_meta_register() or dtrace_meta_unregister(). However, the context 2299 * is such that the provider may -- and is expected to -- call 2300 * provider-related DTrace provider APIs including dtrace_register(). 2301 * 2302 * 1.4 void dtms_remove_pid(void *arg, dtrace_meta_provider_t *mprov, 2303 * pid_t pid) 2304 * 2305 * 1.4.1 Overview 2306 * 2307 * Called by the DTrace framework to remove a provider that had previously 2308 * been instantiated via the dtms_provide_pid() entry point. The meta 2309 * provider need not remove the provider immediately, but this entry 2310 * point indicates that the provider should be removed as soon as possible 2311 * using the dtrace_unregister() API. 2312 * 2313 * 1.4.2 Arguments and notes 2314 * 2315 * The first argument is the cookie as passed to dtrace_meta_register(). 2316 * The second argument is a pointer to a structure describing the helper 2317 * provider. The third argument is the process identifier for process 2318 * associated with this new provider. 2319 * 2320 * 1.4.3 Return value 2321 * 2322 * None 2323 * 2324 * 1.4.4 Caller's context 2325 * 2326 * dtms_remove_pid() is called from either ioctl() or exit() context. 2327 * The DTrace framework is locked in such a way that meta providers may not 2328 * register or unregister. This means that the meta provider cannot call 2329 * dtrace_meta_register() or dtrace_meta_unregister(). However, the context 2330 * is such that the provider may -- and is expected to -- call 2331 * provider-related DTrace provider APIs including dtrace_unregister(). 2332 */ 2333typedef struct dtrace_helper_probedesc { 2334 char *dthpb_mod; /* probe module */ 2335 char *dthpb_func; /* probe function */ 2336 char *dthpb_name; /* probe name */ 2337 uint64_t dthpb_base; /* base address */ 2338#if !defined(__APPLE__) 2339 uint32_t *dthpb_offs; /* offsets array */ 2340 uint32_t *dthpb_enoffs; /* is-enabled offsets array */ 2341#else 2342 int32_t *dthpb_offs; /* (signed) offsets array */ 2343 int32_t *dthpb_enoffs; /* (signed) is-enabled offsets array */ 2344#endif 2345 uint32_t dthpb_noffs; /* offsets count */ 2346 uint32_t dthpb_nenoffs; /* is-enabled offsets count */ 2347 uint8_t *dthpb_args; /* argument mapping array */ 2348 uint8_t dthpb_xargc; /* translated argument count */ 2349 uint8_t dthpb_nargc; /* native argument count */ 2350 char *dthpb_xtypes; /* translated types strings */ 2351 char *dthpb_ntypes; /* native types strings */ 2352} dtrace_helper_probedesc_t; 2353 2354typedef struct dtrace_helper_provdesc { 2355 char *dthpv_provname; /* provider name */ 2356 dtrace_pattr_t dthpv_pattr; /* stability attributes */ 2357} dtrace_helper_provdesc_t; 2358 2359typedef struct dtrace_mops { 2360 void (*dtms_create_probe)(void *, void *, dtrace_helper_probedesc_t *); 2361 void *(*dtms_provide_pid)(void *, dtrace_helper_provdesc_t *, pid_t); 2362 void (*dtms_remove_pid)(void *, dtrace_helper_provdesc_t *, pid_t); 2363} dtrace_mops_t; 2364 2365typedef uintptr_t dtrace_meta_provider_id_t; 2366 2367extern int dtrace_meta_register(const char *, const dtrace_mops_t *, void *, 2368 dtrace_meta_provider_id_t *); 2369extern int dtrace_meta_unregister(dtrace_meta_provider_id_t); 2370 2371/* 2372 * DTrace Kernel Hooks 2373 * 2374 * The following functions are implemented by the base kernel and form a set of 2375 * hooks used by the DTrace framework. DTrace hooks are implemented in either 2376 * uts/common/os/dtrace_subr.c, an ISA-specific assembly file, or in a 2377 * uts/<platform>/os/dtrace_subr.c corresponding to each hardware platform. 2378 */ 2379 2380typedef enum dtrace_vtime_state { 2381 DTRACE_VTIME_INACTIVE = 0, /* No DTrace, no TNF */ 2382 DTRACE_VTIME_ACTIVE, /* DTrace virtual time, no TNF */ 2383 DTRACE_VTIME_INACTIVE_TNF, /* No DTrace, TNF active */ 2384 DTRACE_VTIME_ACTIVE_TNF /* DTrace virtual time _and_ TNF */ 2385} dtrace_vtime_state_t; 2386 2387extern dtrace_vtime_state_t dtrace_vtime_active; 2388extern void dtrace_vtime_switch(kthread_t *next); 2389extern void dtrace_vtime_enable_tnf(void); 2390extern void dtrace_vtime_disable_tnf(void); 2391extern void dtrace_vtime_enable(void); 2392extern void dtrace_vtime_disable(void); 2393 2394#if !defined(__APPLE__) 2395struct regs; 2396 2397extern int (*dtrace_pid_probe_ptr)(struct regs *); 2398extern int (*dtrace_return_probe_ptr)(struct regs *); 2399#else 2400#if defined (__i386__) || defined(__x86_64__) 2401extern int (*dtrace_pid_probe_ptr)(x86_saved_state_t *regs); 2402extern int (*dtrace_return_probe_ptr)(x86_saved_state_t* regs); 2403#else 2404extern int (*dtrace_pid_probe_ptr)(arm_saved_state_t *regs); 2405extern int (*dtrace_return_probe_ptr)(arm_saved_state_t* regs); 2406#endif 2407#endif /* __APPLE__ */ 2408extern void (*dtrace_fasttrap_fork_ptr)(proc_t *, proc_t *); 2409extern void (*dtrace_fasttrap_exec_ptr)(proc_t *); 2410extern void (*dtrace_fasttrap_exit_ptr)(proc_t *); 2411extern void dtrace_fasttrap_fork(proc_t *, proc_t *); 2412 2413typedef uintptr_t dtrace_icookie_t; 2414typedef void (*dtrace_xcall_t)(void *); 2415 2416extern dtrace_icookie_t dtrace_interrupt_disable(void); 2417extern void dtrace_interrupt_enable(dtrace_icookie_t); 2418 2419extern void dtrace_membar_producer(void); 2420extern void dtrace_membar_consumer(void); 2421 2422extern void (*dtrace_cpu_init)(processorid_t); 2423#if !defined(__APPLE__) 2424extern void (*dtrace_modload)(struct modctl *); 2425extern void (*dtrace_modunload)(struct modctl *); 2426#else 2427extern int (*dtrace_modload)(struct kmod_info *, uint32_t); 2428extern int (*dtrace_modunload)(struct kmod_info *); 2429#endif /* __APPLE__ */ 2430extern void (*dtrace_helpers_cleanup)(proc_t*); 2431extern void (*dtrace_helpers_fork)(proc_t *parent, proc_t *child); 2432extern void (*dtrace_cpustart_init)(void); 2433extern void (*dtrace_cpustart_fini)(void); 2434 2435extern void (*dtrace_kreloc_init)(void); 2436extern void (*dtrace_kreloc_fini)(void); 2437 2438extern void (*dtrace_debugger_init)(void); 2439extern void (*dtrace_debugger_fini)(void); 2440extern dtrace_cacheid_t dtrace_predcache_id; 2441 2442extern hrtime_t dtrace_gethrtime(void); 2443extern void dtrace_sync(void); 2444extern void dtrace_toxic_ranges(void (*)(uintptr_t, uintptr_t)); 2445extern void dtrace_xcall(processorid_t, dtrace_xcall_t, void *); 2446 2447extern int dtrace_safe_defer_signal(void); 2448extern void dtrace_safe_synchronous_signal(void); 2449 2450extern int dtrace_mach_aframes(void); 2451 2452#if !defined(__APPLE__) 2453#if defined(__i386) || defined(__amd64) 2454extern int dtrace_instr_size(uchar_t *instr); 2455extern int dtrace_instr_size_isa(uchar_t *, model_t, int *); 2456extern void dtrace_invop_add(int (*)(uintptr_t, uintptr_t *, uintptr_t)); 2457extern void dtrace_invop_remove(int (*)(uintptr_t, uintptr_t *, uintptr_t)); 2458extern void dtrace_invop_callsite(void); 2459#endif 2460 2461#ifdef __sparc 2462extern int dtrace_blksuword32(uintptr_t, uint32_t *, int); 2463extern void dtrace_getfsr(uint64_t *); 2464#endif 2465#else 2466#if defined(__i386__) || defined(__x86_64__) 2467extern int dtrace_instr_size(uchar_t *instr); 2468extern int dtrace_instr_size_isa(uchar_t *, model_t, int *); 2469extern void dtrace_invop_add(int (*)(uintptr_t, uintptr_t *, uintptr_t)); 2470extern void dtrace_invop_remove(int (*)(uintptr_t, uintptr_t *, uintptr_t)); 2471extern void *dtrace_invop_callsite_pre; 2472extern void *dtrace_invop_callsite_post; 2473#endif 2474 2475 2476#undef proc_t 2477#endif /* __APPLE__ */ 2478 2479#define DTRACE_CPUFLAG_ISSET(flag) \ 2480 (cpu_core[CPU->cpu_id].cpuc_dtrace_flags & (flag)) 2481 2482#define DTRACE_CPUFLAG_SET(flag) \ 2483 (cpu_core[CPU->cpu_id].cpuc_dtrace_flags |= (flag)) 2484 2485#define DTRACE_CPUFLAG_CLEAR(flag) \ 2486 (cpu_core[CPU->cpu_id].cpuc_dtrace_flags &= ~(flag)) 2487 2488#endif /* _KERNEL */ 2489 2490#endif /* _ASM */ 2491 2492#if !defined(__APPLE__) 2493#if defined(__i386) || defined(__amd64) 2494 2495#define DTRACE_INVOP_PUSHL_EBP 1 2496#define DTRACE_INVOP_POPL_EBP 2 2497#define DTRACE_INVOP_LEAVE 3 2498#define DTRACE_INVOP_NOP 4 2499#define DTRACE_INVOP_RET 5 2500 2501#endif 2502#else 2503#if defined(__i386__) || defined(__x86_64__) 2504 2505#define DTRACE_INVOP_PUSHL_EBP 1 2506#define DTRACE_INVOP_POPL_EBP 2 2507#define DTRACE_INVOP_LEAVE 3 2508#define DTRACE_INVOP_NOP 4 2509#define DTRACE_INVOP_RET 5 2510 2511#endif 2512 2513 2514#endif /* __APPLE__ */ 2515 2516#ifdef __cplusplus 2517} 2518#endif 2519 2520#endif /* _SYS_DTRACE_H */ 2521