1/*  *********************************************************************
2    *  Broadcom Common Firmware Environment (CFE)
3    *
4    *  BSP Configuration file			File: bsp_config.h
5    *
6    *  This module contains global parameters and conditional
7    *  compilation settings for building CFE.
8    *
9    *  Author:  Mitch Lichtenberg
10    *
11    *********************************************************************
12    *
13    *  Copyright 2000,2001,2002,2003
14    *  Broadcom Corporation. All rights reserved.
15    *
16    *  This software is furnished under license and may be used and
17    *  copied only in accordance with the following terms and
18    *  conditions.  Subject to these conditions, you may download,
19    *  copy, install, use, modify and distribute modified or unmodified
20    *  copies of this software in source and/or binary form.  No title
21    *  or ownership is transferred hereby.
22    *
23    *  1) Any source code used, modified or distributed must reproduce
24    *     and retain this copyright notice and list of conditions
25    *     as they appear in the source file.
26    *
27    *  2) No right is granted to use any trade name, trademark, or
28    *     logo of Broadcom Corporation.  The "Broadcom Corporation"
29    *     name may not be used to endorse or promote products derived
30    *     from this software without the prior written permission of
31    *     Broadcom Corporation.
32    *
33    *  3) THIS SOFTWARE IS PROVIDED "AS-IS" AND ANY EXPRESS OR
34    *     IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED
35    *     WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR
36    *     PURPOSE, OR NON-INFRINGEMENT ARE DISCLAIMED. IN NO EVENT
37    *     SHALL BROADCOM BE LIABLE FOR ANY DAMAGES WHATSOEVER, AND IN
38    *     PARTICULAR, BROADCOM SHALL NOT BE LIABLE FOR DIRECT, INDIRECT,
39    *     INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
40    *     (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
41    *     GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
42    *     BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY
43    *     OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
44    *     TORT (INCLUDING NEGLIGENCE OR OTHERWISE), EVEN IF ADVISED OF
45    *     THE POSSIBILITY OF SUCH DAMAGE.
46    ********************************************************************* */
47
48
49
50#define CFG_INIT_L1		1	/* initialize the L1 cache */
51#define CFG_INIT_L2		1	/* initialize the L2 cache */
52
53#define CFG_INIT_DRAM		1	/* initialize DRAM controller */
54#define CFG_DRAM_SIZE		xxx	/* size of DRAM if you don't initialize */
55
56#define CFG_NETWORK		1	/* define to include network support */
57#define CFG_TCP			1	/* include TCP stack */
58
59#define CFG_FATFS 1
60#define CFG_UI			1	/* Define to enable user interface */
61
62#ifdef _UNICPU_
63#define CFG_MULTI_CPUS		0	/* Define to include multiple CPU support */
64#else
65#define CFG_MULTI_CPUS		1	/* Define to include multiple CPU support */
66#endif
67
68#define CFG_HEAP_SIZE		1024	/* heap size in kilobytes */
69
70#define CFG_STACK_SIZE		8192	/* stack size (bytes, rounded up to K) */
71
72
73/*
74 * These parameters control the flash driver's sector buffer.
75 * If you write environment variables or make small changes to
76 * flash sectors from user applications, you
77 * need to have the heap big enough to store a temporary sector
78 * for merging in small changes to flash sectors, so you
79 * should set CFG_FLASH_ALLOC_SECTOR_BUFFER in that case.
80 * Otherwise, you can provide an address in unallocated memory
81 * of where to place the sector buffer.
82 */
83
84#define CFG_FLASH_ALLOC_SECTOR_BUFFER 0	/* '1' to allocate sector buffer from the heap */
85#define CFG_FLASH_SECTOR_BUFFER_ADDR (100*1024*1024-128*1024)	/* 100MB - 128K */
86#define CFG_FLASH_SECTOR_BUFFER_SIZE (128*1024)
87
88/*
89 * The flash staging buffer is where we store a flash image before we write
90 * it to the flash.  It's too big for the heap.
91 */
92
93#define CFG_FLASH_STAGING_BUFFER_ADDR (100*1024*1024)
94#define CFG_FLASH_STAGING_BUFFER_SIZE (4*1024*1024)
95
96/*
97 * These parameters control the default DRAM init table
98 * inside of sb1250_draminit.c.
99 */
100
101#define CFG_DRAM_INTERLEAVE     0       /* interleave the channels if possible */
102#define CFG_DRAM_ECC		1	/* Turn on to enable ECC */
103#define CFG_DRAM_BLOCK_SIZE	32	/* don't interleave columns */
104#define CFG_DRAM_CSINTERLEAVE   0       /* Use 0,1, or 2. Max number of address
105					   bits allowed for chip select
106					   interleaving. Only matching dimms
107					   will be interleaved.  3 outcomes:
108					   no interleaving, interleave CS 0 &
109					   1, and interleave CS 0,1,2 & 3. */
110#define CFG_DRAM_MIN_tMEMCLK	DRT10(8,1)	/* 8.1 ns (124Mhz) */
111
112#define CFG_SERIAL_BAUD_RATE	115200	/* normal console speed */
113
114#define CFG_VENDOR_EXTENSIONS   0
115
116
117/*
118 * Include board-specific stuff
119 */
120
121#include "lausanne.h"
122
123