1#!/bin/sh 2# 3# The optional parameter to this function specifies the name 4# of a binary file to be in the 'flash2' device. You can 5# boot this binary by typing: 6# 7# cfe> boot -elf -rawfs flash2: 8# 9# 10if [ "$1" ]; then 11 sb1250-run \ 12 --sim-check-undefined \ 13 --add-hw flash2.m4 \ 14 --with-boot-flash-file cfe.srec \ 15 --with-boot-flash-type ram \ 16 --no-file \ 17 --with-swarm-devs \ 18 --with-sample-pci-devs \ 19 --with-swarm-ide \ 20 --with-swarm-ide-disk0-file disk0.dsk \ 21 --with-swarm-ide-disk0-size 60 \ 22 --with-memory-config 2x32 \ 23 --with-swarm-rtc-eeprom-file x1240rom.bin \ 24 --with-swarm-pcmcia-flash-file $1 25else 26 sb1250-run \ 27 --sim-check-undefined \ 28 --with-boot-flash-file cfe.srec \ 29 --with-boot-flash-type ram \ 30 --no-file \ 31 --with-swarm-devs \ 32 --with-sample-pci-devs \ 33 --with-swarm-ide \ 34 --with-swarm-ide-disk0-file disk0.dsk \ 35 --with-swarm-ide-disk0-size 60 \ 36 --with-memory-config 2x32 \ 37 --with-swarm-rtc-eeprom-file x1240rom.bin 38fi 39