Searched hist:283161 (Results 1 - 8 of 8) sorted by relevance
| /freebsd-10-stable/etc/etc.arm/ | ||
| H A D | ttys | diff 283161 Wed May 20 17:47:41 MDT 2015 gjb MFC r282500, r282693: r282500: Add initial support for building RPI2 images. In release.sh, allow overriding buildenv_setup() before the handoff to arm/release.sh. Copy arm/RPI-B.conf -> arm/RPI2.conf, set UBOOT_PORT and the correct KERNEL, and add the buildenv_setup() override to install the sysutils/u-boot-rpi2 port/package. Copy tools/arm/crochet-RPI-B.conf -> tools/arm/crochet-RPI2.conf, and set the correct entries for the RaspberryPi2 board. r282693: Merge ^/projects/release-arm-redux into ^/head. Of note: - This commit adds native FreeBSD/arm release build support without requiring out-of-tree utilities. - Part of this merge removes the WANDBOARD-{SOLO,DUAL,QUAD} kernel configuration files, for which the IMX6 kernel configuration file should be used instead. - The resulting images have a 'freebsd' user (password 'freebsd'), to allow ssh(1) access when console access is not available (VGA or serial). The default 'root' user password is set to 'root'. - The /etc/ttys file for arm images now enable both ttyv0 and ttyu0 by default. Note: The RPI2 kernel configuration does not yet exist in stable/10, however the merge conflicts needed to be properly resolved. Additionally, SRCBRANCH has been set to base/stable/10 in the updated arm configuration files as part of this commit. Sponsored by: The FreeBSD Foundation 283161 Wed May 20 17:47:41 MDT 2015 gjb MFC r282500, r282693: r282500: Add initial support for building RPI2 images. In release.sh, allow overriding buildenv_setup() before the handoff to arm/release.sh. Copy arm/RPI-B.conf -> arm/RPI2.conf, set UBOOT_PORT and the correct KERNEL, and add the buildenv_setup() override to install the sysutils/u-boot-rpi2 port/package. Copy tools/arm/crochet-RPI-B.conf -> tools/arm/crochet-RPI2.conf, and set the correct entries for the RaspberryPi2 board. r282693: Merge ^/projects/release-arm-redux into ^/head. Of note: - This commit adds native FreeBSD/arm release build support without requiring out-of-tree utilities. - Part of this merge removes the WANDBOARD-{SOLO,DUAL,QUAD} kernel configuration files, for which the IMX6 kernel configuration file should be used instead. - The resulting images have a 'freebsd' user (password 'freebsd'), to allow ssh(1) access when console access is not available (VGA or serial). The default 'root' user password is set to 'root'. - The /etc/ttys file for arm images now enable both ttyv0 and ttyu0 by default. Note: The RPI2 kernel configuration does not yet exist in stable/10, however the merge conflicts needed to be properly resolved. Additionally, SRCBRANCH has been set to base/stable/10 in the updated arm configuration files as part of this commit. Sponsored by: The FreeBSD Foundation |
| /freebsd-10-stable/release/arm/ | ||
| H A D | RPI2.conf | diff 283161 Wed May 20 17:47:41 MDT 2015 gjb MFC r282500, r282693: r282500: Add initial support for building RPI2 images. In release.sh, allow overriding buildenv_setup() before the handoff to arm/release.sh. Copy arm/RPI-B.conf -> arm/RPI2.conf, set UBOOT_PORT and the correct KERNEL, and add the buildenv_setup() override to install the sysutils/u-boot-rpi2 port/package. Copy tools/arm/crochet-RPI-B.conf -> tools/arm/crochet-RPI2.conf, and set the correct entries for the RaspberryPi2 board. r282693: Merge ^/projects/release-arm-redux into ^/head. Of note: - This commit adds native FreeBSD/arm release build support without requiring out-of-tree utilities. - Part of this merge removes the WANDBOARD-{SOLO,DUAL,QUAD} kernel configuration files, for which the IMX6 kernel configuration file should be used instead. - The resulting images have a 'freebsd' user (password 'freebsd'), to allow ssh(1) access when console access is not available (VGA or serial). The default 'root' user password is set to 'root'. - The /etc/ttys file for arm images now enable both ttyv0 and ttyu0 by default. Note: The RPI2 kernel configuration does not yet exist in stable/10, however the merge conflicts needed to be properly resolved. Additionally, SRCBRANCH has been set to base/stable/10 in the updated arm configuration files as part of this commit. Sponsored by: The FreeBSD Foundation 283161 Wed May 20 17:47:41 MDT 2015 gjb MFC r282500, r282693: r282500: Add initial support for building RPI2 images. In release.sh, allow overriding buildenv_setup() before the handoff to arm/release.sh. Copy arm/RPI-B.conf -> arm/RPI2.conf, set UBOOT_PORT and the correct KERNEL, and add the buildenv_setup() override to install the sysutils/u-boot-rpi2 port/package. Copy tools/arm/crochet-RPI-B.conf -> tools/arm/crochet-RPI2.conf, and set the correct entries for the RaspberryPi2 board. r282693: Merge ^/projects/release-arm-redux into ^/head. Of note: - This commit adds native FreeBSD/arm release build support without requiring out-of-tree utilities. - Part of this merge removes the WANDBOARD-{SOLO,DUAL,QUAD} kernel configuration files, for which the IMX6 kernel configuration file should be used instead. - The resulting images have a 'freebsd' user (password 'freebsd'), to allow ssh(1) access when console access is not available (VGA or serial). The default 'root' user password is set to 'root'. - The /etc/ttys file for arm images now enable both ttyv0 and ttyu0 by default. Note: The RPI2 kernel configuration does not yet exist in stable/10, however the merge conflicts needed to be properly resolved. Additionally, SRCBRANCH has been set to base/stable/10 in the updated arm configuration files as part of this commit. Sponsored by: The FreeBSD Foundation |
| H A D | RPI-B.conf | diff 283161 Wed May 20 17:47:41 MDT 2015 gjb MFC r282500, r282693: r282500: Add initial support for building RPI2 images. In release.sh, allow overriding buildenv_setup() before the handoff to arm/release.sh. Copy arm/RPI-B.conf -> arm/RPI2.conf, set UBOOT_PORT and the correct KERNEL, and add the buildenv_setup() override to install the sysutils/u-boot-rpi2 port/package. Copy tools/arm/crochet-RPI-B.conf -> tools/arm/crochet-RPI2.conf, and set the correct entries for the RaspberryPi2 board. r282693: Merge ^/projects/release-arm-redux into ^/head. Of note: - This commit adds native FreeBSD/arm release build support without requiring out-of-tree utilities. - Part of this merge removes the WANDBOARD-{SOLO,DUAL,QUAD} kernel configuration files, for which the IMX6 kernel configuration file should be used instead. - The resulting images have a 'freebsd' user (password 'freebsd'), to allow ssh(1) access when console access is not available (VGA or serial). The default 'root' user password is set to 'root'. - The /etc/ttys file for arm images now enable both ttyv0 and ttyu0 by default. Note: The RPI2 kernel configuration does not yet exist in stable/10, however the merge conflicts needed to be properly resolved. Additionally, SRCBRANCH has been set to base/stable/10 in the updated arm configuration files as part of this commit. Sponsored by: The FreeBSD Foundation diff 283161 Wed May 20 17:47:41 MDT 2015 gjb MFC r282500, r282693: r282500: Add initial support for building RPI2 images. In release.sh, allow overriding buildenv_setup() before the handoff to arm/release.sh. Copy arm/RPI-B.conf -> arm/RPI2.conf, set UBOOT_PORT and the correct KERNEL, and add the buildenv_setup() override to install the sysutils/u-boot-rpi2 port/package. Copy tools/arm/crochet-RPI-B.conf -> tools/arm/crochet-RPI2.conf, and set the correct entries for the RaspberryPi2 board. r282693: Merge ^/projects/release-arm-redux into ^/head. Of note: - This commit adds native FreeBSD/arm release build support without requiring out-of-tree utilities. - Part of this merge removes the WANDBOARD-{SOLO,DUAL,QUAD} kernel configuration files, for which the IMX6 kernel configuration file should be used instead. - The resulting images have a 'freebsd' user (password 'freebsd'), to allow ssh(1) access when console access is not available (VGA or serial). The default 'root' user password is set to 'root'. - The /etc/ttys file for arm images now enable both ttyv0 and ttyu0 by default. Note: The RPI2 kernel configuration does not yet exist in stable/10, however the merge conflicts needed to be properly resolved. Additionally, SRCBRANCH has been set to base/stable/10 in the updated arm configuration files as part of this commit. Sponsored by: The FreeBSD Foundation |
| H A D | WANDBOARD.conf | diff 283161 Wed May 20 17:47:41 MDT 2015 gjb MFC r282500, r282693: r282500: Add initial support for building RPI2 images. In release.sh, allow overriding buildenv_setup() before the handoff to arm/release.sh. Copy arm/RPI-B.conf -> arm/RPI2.conf, set UBOOT_PORT and the correct KERNEL, and add the buildenv_setup() override to install the sysutils/u-boot-rpi2 port/package. Copy tools/arm/crochet-RPI-B.conf -> tools/arm/crochet-RPI2.conf, and set the correct entries for the RaspberryPi2 board. r282693: Merge ^/projects/release-arm-redux into ^/head. Of note: - This commit adds native FreeBSD/arm release build support without requiring out-of-tree utilities. - Part of this merge removes the WANDBOARD-{SOLO,DUAL,QUAD} kernel configuration files, for which the IMX6 kernel configuration file should be used instead. - The resulting images have a 'freebsd' user (password 'freebsd'), to allow ssh(1) access when console access is not available (VGA or serial). The default 'root' user password is set to 'root'. - The /etc/ttys file for arm images now enable both ttyv0 and ttyu0 by default. Note: The RPI2 kernel configuration does not yet exist in stable/10, however the merge conflicts needed to be properly resolved. Additionally, SRCBRANCH has been set to base/stable/10 in the updated arm configuration files as part of this commit. Sponsored by: The FreeBSD Foundation 283161 Wed May 20 17:47:41 MDT 2015 gjb MFC r282500, r282693: r282500: Add initial support for building RPI2 images. In release.sh, allow overriding buildenv_setup() before the handoff to arm/release.sh. Copy arm/RPI-B.conf -> arm/RPI2.conf, set UBOOT_PORT and the correct KERNEL, and add the buildenv_setup() override to install the sysutils/u-boot-rpi2 port/package. Copy tools/arm/crochet-RPI-B.conf -> tools/arm/crochet-RPI2.conf, and set the correct entries for the RaspberryPi2 board. r282693: Merge ^/projects/release-arm-redux into ^/head. Of note: - This commit adds native FreeBSD/arm release build support without requiring out-of-tree utilities. - Part of this merge removes the WANDBOARD-{SOLO,DUAL,QUAD} kernel configuration files, for which the IMX6 kernel configuration file should be used instead. - The resulting images have a 'freebsd' user (password 'freebsd'), to allow ssh(1) access when console access is not available (VGA or serial). The default 'root' user password is set to 'root'. - The /etc/ttys file for arm images now enable both ttyv0 and ttyu0 by default. Note: The RPI2 kernel configuration does not yet exist in stable/10, however the merge conflicts needed to be properly resolved. Additionally, SRCBRANCH has been set to base/stable/10 in the updated arm configuration files as part of this commit. Sponsored by: The FreeBSD Foundation |
| H A D | BEAGLEBONE.conf | diff 283161 Wed May 20 17:47:41 MDT 2015 gjb MFC r282500, r282693: r282500: Add initial support for building RPI2 images. In release.sh, allow overriding buildenv_setup() before the handoff to arm/release.sh. Copy arm/RPI-B.conf -> arm/RPI2.conf, set UBOOT_PORT and the correct KERNEL, and add the buildenv_setup() override to install the sysutils/u-boot-rpi2 port/package. Copy tools/arm/crochet-RPI-B.conf -> tools/arm/crochet-RPI2.conf, and set the correct entries for the RaspberryPi2 board. r282693: Merge ^/projects/release-arm-redux into ^/head. Of note: - This commit adds native FreeBSD/arm release build support without requiring out-of-tree utilities. - Part of this merge removes the WANDBOARD-{SOLO,DUAL,QUAD} kernel configuration files, for which the IMX6 kernel configuration file should be used instead. - The resulting images have a 'freebsd' user (password 'freebsd'), to allow ssh(1) access when console access is not available (VGA or serial). The default 'root' user password is set to 'root'. - The /etc/ttys file for arm images now enable both ttyv0 and ttyu0 by default. Note: The RPI2 kernel configuration does not yet exist in stable/10, however the merge conflicts needed to be properly resolved. Additionally, SRCBRANCH has been set to base/stable/10 in the updated arm configuration files as part of this commit. Sponsored by: The FreeBSD Foundation diff 283161 Wed May 20 17:47:41 MDT 2015 gjb MFC r282500, r282693: r282500: Add initial support for building RPI2 images. In release.sh, allow overriding buildenv_setup() before the handoff to arm/release.sh. Copy arm/RPI-B.conf -> arm/RPI2.conf, set UBOOT_PORT and the correct KERNEL, and add the buildenv_setup() override to install the sysutils/u-boot-rpi2 port/package. Copy tools/arm/crochet-RPI-B.conf -> tools/arm/crochet-RPI2.conf, and set the correct entries for the RaspberryPi2 board. r282693: Merge ^/projects/release-arm-redux into ^/head. Of note: - This commit adds native FreeBSD/arm release build support without requiring out-of-tree utilities. - Part of this merge removes the WANDBOARD-{SOLO,DUAL,QUAD} kernel configuration files, for which the IMX6 kernel configuration file should be used instead. - The resulting images have a 'freebsd' user (password 'freebsd'), to allow ssh(1) access when console access is not available (VGA or serial). The default 'root' user password is set to 'root'. - The /etc/ttys file for arm images now enable both ttyv0 and ttyu0 by default. Note: The RPI2 kernel configuration does not yet exist in stable/10, however the merge conflicts needed to be properly resolved. Additionally, SRCBRANCH has been set to base/stable/10 in the updated arm configuration files as part of this commit. Sponsored by: The FreeBSD Foundation |
| H A D | PANDABOARD.conf | diff 283161 Wed May 20 17:47:41 MDT 2015 gjb MFC r282500, r282693: r282500: Add initial support for building RPI2 images. In release.sh, allow overriding buildenv_setup() before the handoff to arm/release.sh. Copy arm/RPI-B.conf -> arm/RPI2.conf, set UBOOT_PORT and the correct KERNEL, and add the buildenv_setup() override to install the sysutils/u-boot-rpi2 port/package. Copy tools/arm/crochet-RPI-B.conf -> tools/arm/crochet-RPI2.conf, and set the correct entries for the RaspberryPi2 board. r282693: Merge ^/projects/release-arm-redux into ^/head. Of note: - This commit adds native FreeBSD/arm release build support without requiring out-of-tree utilities. - Part of this merge removes the WANDBOARD-{SOLO,DUAL,QUAD} kernel configuration files, for which the IMX6 kernel configuration file should be used instead. - The resulting images have a 'freebsd' user (password 'freebsd'), to allow ssh(1) access when console access is not available (VGA or serial). The default 'root' user password is set to 'root'. - The /etc/ttys file for arm images now enable both ttyv0 and ttyu0 by default. Note: The RPI2 kernel configuration does not yet exist in stable/10, however the merge conflicts needed to be properly resolved. Additionally, SRCBRANCH has been set to base/stable/10 in the updated arm configuration files as part of this commit. Sponsored by: The FreeBSD Foundation diff 283161 Wed May 20 17:47:41 MDT 2015 gjb MFC r282500, r282693: r282500: Add initial support for building RPI2 images. In release.sh, allow overriding buildenv_setup() before the handoff to arm/release.sh. Copy arm/RPI-B.conf -> arm/RPI2.conf, set UBOOT_PORT and the correct KERNEL, and add the buildenv_setup() override to install the sysutils/u-boot-rpi2 port/package. Copy tools/arm/crochet-RPI-B.conf -> tools/arm/crochet-RPI2.conf, and set the correct entries for the RaspberryPi2 board. r282693: Merge ^/projects/release-arm-redux into ^/head. Of note: - This commit adds native FreeBSD/arm release build support without requiring out-of-tree utilities. - Part of this merge removes the WANDBOARD-{SOLO,DUAL,QUAD} kernel configuration files, for which the IMX6 kernel configuration file should be used instead. - The resulting images have a 'freebsd' user (password 'freebsd'), to allow ssh(1) access when console access is not available (VGA or serial). The default 'root' user password is set to 'root'. - The /etc/ttys file for arm images now enable both ttyv0 and ttyu0 by default. Note: The RPI2 kernel configuration does not yet exist in stable/10, however the merge conflicts needed to be properly resolved. Additionally, SRCBRANCH has been set to base/stable/10 in the updated arm configuration files as part of this commit. Sponsored by: The FreeBSD Foundation |
| /freebsd-10-stable/release/tools/ | ||
| H A D | arm.subr | diff 283161 Wed May 20 17:47:41 MDT 2015 gjb MFC r282500, r282693: r282500: Add initial support for building RPI2 images. In release.sh, allow overriding buildenv_setup() before the handoff to arm/release.sh. Copy arm/RPI-B.conf -> arm/RPI2.conf, set UBOOT_PORT and the correct KERNEL, and add the buildenv_setup() override to install the sysutils/u-boot-rpi2 port/package. Copy tools/arm/crochet-RPI-B.conf -> tools/arm/crochet-RPI2.conf, and set the correct entries for the RaspberryPi2 board. r282693: Merge ^/projects/release-arm-redux into ^/head. Of note: - This commit adds native FreeBSD/arm release build support without requiring out-of-tree utilities. - Part of this merge removes the WANDBOARD-{SOLO,DUAL,QUAD} kernel configuration files, for which the IMX6 kernel configuration file should be used instead. - The resulting images have a 'freebsd' user (password 'freebsd'), to allow ssh(1) access when console access is not available (VGA or serial). The default 'root' user password is set to 'root'. - The /etc/ttys file for arm images now enable both ttyv0 and ttyu0 by default. Note: The RPI2 kernel configuration does not yet exist in stable/10, however the merge conflicts needed to be properly resolved. Additionally, SRCBRANCH has been set to base/stable/10 in the updated arm configuration files as part of this commit. Sponsored by: The FreeBSD Foundation 283161 Wed May 20 17:47:41 MDT 2015 gjb MFC r282500, r282693: r282500: Add initial support for building RPI2 images. In release.sh, allow overriding buildenv_setup() before the handoff to arm/release.sh. Copy arm/RPI-B.conf -> arm/RPI2.conf, set UBOOT_PORT and the correct KERNEL, and add the buildenv_setup() override to install the sysutils/u-boot-rpi2 port/package. Copy tools/arm/crochet-RPI-B.conf -> tools/arm/crochet-RPI2.conf, and set the correct entries for the RaspberryPi2 board. r282693: Merge ^/projects/release-arm-redux into ^/head. Of note: - This commit adds native FreeBSD/arm release build support without requiring out-of-tree utilities. - Part of this merge removes the WANDBOARD-{SOLO,DUAL,QUAD} kernel configuration files, for which the IMX6 kernel configuration file should be used instead. - The resulting images have a 'freebsd' user (password 'freebsd'), to allow ssh(1) access when console access is not available (VGA or serial). The default 'root' user password is set to 'root'. - The /etc/ttys file for arm images now enable both ttyv0 and ttyu0 by default. Note: The RPI2 kernel configuration does not yet exist in stable/10, however the merge conflicts needed to be properly resolved. Additionally, SRCBRANCH has been set to base/stable/10 in the updated arm configuration files as part of this commit. Sponsored by: The FreeBSD Foundation |
| /freebsd-10-stable/release/ | ||
| H A D | release.sh | diff 283161 Wed May 20 17:47:41 MDT 2015 gjb MFC r282500, r282693: r282500: Add initial support for building RPI2 images. In release.sh, allow overriding buildenv_setup() before the handoff to arm/release.sh. Copy arm/RPI-B.conf -> arm/RPI2.conf, set UBOOT_PORT and the correct KERNEL, and add the buildenv_setup() override to install the sysutils/u-boot-rpi2 port/package. Copy tools/arm/crochet-RPI-B.conf -> tools/arm/crochet-RPI2.conf, and set the correct entries for the RaspberryPi2 board. r282693: Merge ^/projects/release-arm-redux into ^/head. Of note: - This commit adds native FreeBSD/arm release build support without requiring out-of-tree utilities. - Part of this merge removes the WANDBOARD-{SOLO,DUAL,QUAD} kernel configuration files, for which the IMX6 kernel configuration file should be used instead. - The resulting images have a 'freebsd' user (password 'freebsd'), to allow ssh(1) access when console access is not available (VGA or serial). The default 'root' user password is set to 'root'. - The /etc/ttys file for arm images now enable both ttyv0 and ttyu0 by default. Note: The RPI2 kernel configuration does not yet exist in stable/10, however the merge conflicts needed to be properly resolved. Additionally, SRCBRANCH has been set to base/stable/10 in the updated arm configuration files as part of this commit. Sponsored by: The FreeBSD Foundation diff 283161 Wed May 20 17:47:41 MDT 2015 gjb MFC r282500, r282693: r282500: Add initial support for building RPI2 images. In release.sh, allow overriding buildenv_setup() before the handoff to arm/release.sh. Copy arm/RPI-B.conf -> arm/RPI2.conf, set UBOOT_PORT and the correct KERNEL, and add the buildenv_setup() override to install the sysutils/u-boot-rpi2 port/package. Copy tools/arm/crochet-RPI-B.conf -> tools/arm/crochet-RPI2.conf, and set the correct entries for the RaspberryPi2 board. r282693: Merge ^/projects/release-arm-redux into ^/head. Of note: - This commit adds native FreeBSD/arm release build support without requiring out-of-tree utilities. - Part of this merge removes the WANDBOARD-{SOLO,DUAL,QUAD} kernel configuration files, for which the IMX6 kernel configuration file should be used instead. - The resulting images have a 'freebsd' user (password 'freebsd'), to allow ssh(1) access when console access is not available (VGA or serial). The default 'root' user password is set to 'root'. - The /etc/ttys file for arm images now enable both ttyv0 and ttyu0 by default. Note: The RPI2 kernel configuration does not yet exist in stable/10, however the merge conflicts needed to be properly resolved. Additionally, SRCBRANCH has been set to base/stable/10 in the updated arm configuration files as part of this commit. Sponsored by: The FreeBSD Foundation |
Completed in 99 milliseconds