#
331741 |
|
29-Mar-2018 |
gjb |
MFC r331562 (manu): release: arm: Copy boot.scr from ports
Latest u-boot update need u-boot script to load and start ubldr. (See D14230 for more details) Copy this file for our arm release on the fat partition.
|
#
326018 |
|
20-Nov-2017 |
gjb |
MFC r325373, r325861: r325373 (manu): release/arm: Do not install ubldr
r325861 (manu): release: Update u-boot and firmware file for RPI-B target.
Sponsored by: The FreeBSD Foundation
|
#
326016 |
|
20-Nov-2017 |
gjb |
MFC r325950, r325953: r325950: Sort variables for consistency.
r325953: Add general configuration files used by release/release.sh for big-iron installation images.
Sponsored by: The FreeBSD Foundation
|
#
323113 |
|
01-Sep-2017 |
marius |
Fix a typo in the hard link creation for a WANDBOARD DTB file. Just like r322666 which introduced this bug, this is a direct commit to stable/10.
Approved by: re (kib)
|
#
322666 |
|
18-Aug-2017 |
gjb |
Create hard links to the installed dtb files for the BEAGLEBONE [1] and WANDBOARD [2] images to fix a boot issue.
This is a direct commit to stable/10, as the change is not needed for head and stable/11.
Approved by: re (marius) Help from: manu [1], ian [2] Tested by: gjb [1], ian [2] Sponsored by: The FreeBSD Foundation
|
#
316765 |
|
13-Apr-2017 |
gjb |
MFC r316617 (partial): - Use the 'conv=sync' dd(1) option to fix writing the u-boot.imx file to the md(4) device for IMX6-based boards.
Sponsored by: The FreeBSD Foundation
|
#
303856 |
|
08-Aug-2016 |
gjb |
Increase the IMX (CUBOX-HUMMINGBOARD, WANDBOARD) image size to successfully build.
While here, add the SRCBRANCH to the CUBOX-HUMMINGBOARD.conf and GUMSTIX.conf.
This is a direct commit to stable/10, as the images for stable/11 are already larger than this.
Sponsored by: The FreeBSD Foundation
|
#
288469 |
|
02-Oct-2015 |
gjb |
MFC r288374: In addition to the ubldr file, also copy ubldr.bin to the MS-DOS partition. This will help with transitioning to a single arm/armv6 userland build which could be used for all FreeBSD/armv6 images without UBLDR_LOADADDR being set for each board (ultimately requiring a separate buildworld for each currently).
Sponsored by: The FreeBSD Foundation
|
#
284517 |
|
17-Jun-2015 |
gjb |
MFC r284333: Reduce the arm/armv6 image size from 1G to 480M.
Since the images are effectively mostly zeros at 1G, reduce the size to allow installation on smaller SD cards, such as 512Mb.
While here, stop writing the /boot.txt file on the WANDBOARD, which isn't used anyway.
Sponsored by: The FreeBSD Foundation
|
#
284156 |
|
08-Jun-2015 |
gjb |
MFC r283920, r283991, r283992, r284102:
r283920: Add a configuration file to support the Cubox/Hummingboard SoC.
r283991: Add initial support for building images for the Duovero Gumstix board.
r283992: Fix a whitespace nit.
r284102: Set the correct UBLDR_LOADADDR for the Wandboard and Cubox/Hummingboard images.
Sponsored by: The FreeBSD Foundation
|
#
283880 |
|
01-Jun-2015 |
gjb |
MFC r283673, r283674:
r283673: Sort configuration options for consistency with other boards.
r283674: Export 'BOARDNAME' when differs from the KERNCONF.
Sponsored by: The FreeBSD Foundation
|
#
283161 |
|
20-May-2015 |
gjb |
MFC r282500, r282693: r282500: Add initial support for building RPI2 images.
In release.sh, allow overriding buildenv_setup() before the handoff to arm/release.sh.
Copy arm/RPI-B.conf -> arm/RPI2.conf, set UBOOT_PORT and the correct KERNEL, and add the buildenv_setup() override to install the sysutils/u-boot-rpi2 port/package.
Copy tools/arm/crochet-RPI-B.conf -> tools/arm/crochet-RPI2.conf, and set the correct entries for the RaspberryPi2 board.
r282693: Merge ^/projects/release-arm-redux into ^/head.
Of note:
- This commit adds native FreeBSD/arm release build support without requiring out-of-tree utilities.
- Part of this merge removes the WANDBOARD-{SOLO,DUAL,QUAD} kernel configuration files, for which the IMX6 kernel configuration file should be used instead.
- The resulting images have a 'freebsd' user (password 'freebsd'), to allow ssh(1) access when console access is not available (VGA or serial). The default 'root' user password is set to 'root'.
- The /etc/ttys file for arm images now enable both ttyv0 and ttyu0 by default.
Note: The RPI2 kernel configuration does not yet exist in stable/10, however the merge conflicts needed to be properly resolved. Additionally, SRCBRANCH has been set to base/stable/10 in the updated arm configuration files as part of this commit.
Sponsored by: The FreeBSD Foundation
|
#
288469 |
|
02-Oct-2015 |
gjb |
MFC r288374: In addition to the ubldr file, also copy ubldr.bin to the MS-DOS partition. This will help with transitioning to a single arm/armv6 userland build which could be used for all FreeBSD/armv6 images without UBLDR_LOADADDR being set for each board (ultimately requiring a separate buildworld for each currently).
Sponsored by: The FreeBSD Foundation
|
#
284517 |
|
17-Jun-2015 |
gjb |
MFC r284333: Reduce the arm/armv6 image size from 1G to 480M.
Since the images are effectively mostly zeros at 1G, reduce the size to allow installation on smaller SD cards, such as 512Mb.
While here, stop writing the /boot.txt file on the WANDBOARD, which isn't used anyway.
Sponsored by: The FreeBSD Foundation
|
#
284156 |
|
08-Jun-2015 |
gjb |
MFC r283920, r283991, r283992, r284102:
r283920: Add a configuration file to support the Cubox/Hummingboard SoC.
r283991: Add initial support for building images for the Duovero Gumstix board.
r283992: Fix a whitespace nit.
r284102: Set the correct UBLDR_LOADADDR for the Wandboard and Cubox/Hummingboard images.
Sponsored by: The FreeBSD Foundation
|
#
283880 |
|
01-Jun-2015 |
gjb |
MFC r283673, r283674:
r283673: Sort configuration options for consistency with other boards.
r283674: Export 'BOARDNAME' when differs from the KERNCONF.
Sponsored by: The FreeBSD Foundation
|
#
283161 |
|
20-May-2015 |
gjb |
MFC r282500, r282693: r282500: Add initial support for building RPI2 images.
In release.sh, allow overriding buildenv_setup() before the handoff to arm/release.sh.
Copy arm/RPI-B.conf -> arm/RPI2.conf, set UBOOT_PORT and the correct KERNEL, and add the buildenv_setup() override to install the sysutils/u-boot-rpi2 port/package.
Copy tools/arm/crochet-RPI-B.conf -> tools/arm/crochet-RPI2.conf, and set the correct entries for the RaspberryPi2 board.
r282693: Merge ^/projects/release-arm-redux into ^/head.
Of note:
- This commit adds native FreeBSD/arm release build support without requiring out-of-tree utilities.
- Part of this merge removes the WANDBOARD-{SOLO,DUAL,QUAD} kernel configuration files, for which the IMX6 kernel configuration file should be used instead.
- The resulting images have a 'freebsd' user (password 'freebsd'), to allow ssh(1) access when console access is not available (VGA or serial). The default 'root' user password is set to 'root'.
- The /etc/ttys file for arm images now enable both ttyv0 and ttyu0 by default.
Note: The RPI2 kernel configuration does not yet exist in stable/10, however the merge conflicts needed to be properly resolved. Additionally, SRCBRANCH has been set to base/stable/10 in the updated arm configuration files as part of this commit.
Sponsored by: The FreeBSD Foundation
|