#
d678a59d |
|
18-May-2024 |
Tom Rini <trini@konsulko.com> |
Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"" When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"' I failed to notice that b4 noticed it was based on next and so took that as the base commit and merged that part of next to master. This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35. Reported-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Tom Rini <trini@konsulko.com> |
#
c45973bc |
|
01-May-2024 |
Tom Rini <trini@konsulko.com> |
pinctrl: Remove <common.h> and add needed includes Remove <common.h> from this driver directory and when needed add missing include files directly. Reviewed-by: Peter Robinson <pbrobinson@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com> |
#
c9309f40 |
|
16-Dec-2023 |
Sean Anderson <seanga2@gmail.com> |
treewide: Remove clk_free This function is a no-op. Remove it. Signed-off-by: Sean Anderson <seanga2@gmail.com> Link: https://lore.kernel.org/r/20231216193843.2463779-3-seanga2@gmail.com |
#
aa34e133 |
|
01-Mar-2022 |
Niklas Cassel <niklas.cassel@wdc.com> |
pinctrl: k210: Fix bias-pull-up Using bias-pull-up would actually cause the pin to have its pull-down enabled. Fix this. Original Linux patch by Sean Anderson: https://lore.kernel.org/linux-gpio/20220209182822.640905-1-seanga2@gmail.com/ Fixes: 7224d5ccf8e1 ("pinctrl: Add support for Kendryte K210 FPIOA") Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com> Reviewed-by: Sean Anderson <seanga2@gmail.com> |
#
daaf1826 |
|
01-Mar-2022 |
Niklas Cassel <niklas.cassel@wdc.com> |
pinctrl: k210: Fix loop in k210_pc_get_drive() The loop exited too early so the k210_pc_drive_strength[0] array element was never used. Original Linux patch by Dan Carpenter: https://lore.kernel.org/linux-gpio/20220209180804.GA18385@kili/ Fixes: 7224d5ccf8e1 ("pinctrl: Add support for Kendryte K210 FPIOA") Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com> Reviewed-by: Sean Anderson <seanga2@gmail.com> |
#
a6c86ec2 |
|
01-Mar-2022 |
Damien Le Moal <damien.lemoal@opensource.wdc.com> |
k210: dts: align fpioa node with Linux Linux kernel fpioa pinctrl driver expects the sysctl phandle and the power bit offset of the fpioa device to be specified as a single property "canaan,k210-sysctl-power". Replace the "canaan,k210-sysctl" and "canaan,k210-power-offset" properties with "canaan,k210-sysctl-power" to satisfy the Linux kernel requirements. This new property is parsed using the existing function dev_read_phandle_with_args(). Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com> Reviewed-by: Sean Anderson <seanga2@gmail.com> |
#
fd426b31 |
|
01-Mar-2022 |
Damien Le Moal <damien.lemoal@opensource.wdc.com> |
k210: use the board vendor name rather than the marketing name "kendryte" is the marketing name for the K210 RISC-V SoC produced by Canaan Inc. Rather than "kendryte,k210", use the usual "canaan,k210" vendor,SoC compatibility string format in the device tree files and use the SoC name for file names. With these changes, the device tree files are more in sync with the Linux kernel DTS and drivers, making uboot device tree usable by the kernel. Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com> Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com> |
#
c45973bc |
|
01-May-2024 |
Tom Rini <trini@konsulko.com> |
pinctrl: Remove <common.h> and add needed includes Remove <common.h> from this driver directory and when needed add missing include files directly. Reviewed-by: Peter Robinson <pbrobinson@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com> |
#
c9309f40 |
|
16-Dec-2023 |
Sean Anderson <seanga2@gmail.com> |
treewide: Remove clk_free This function is a no-op. Remove it. Signed-off-by: Sean Anderson <seanga2@gmail.com> Link: https://lore.kernel.org/r/20231216193843.2463779-3-seanga2@gmail.com |
#
aa34e133 |
|
01-Mar-2022 |
Niklas Cassel <niklas.cassel@wdc.com> |
pinctrl: k210: Fix bias-pull-up Using bias-pull-up would actually cause the pin to have its pull-down enabled. Fix this. Original Linux patch by Sean Anderson: https://lore.kernel.org/linux-gpio/20220209182822.640905-1-seanga2@gmail.com/ Fixes: 7224d5ccf8e1 ("pinctrl: Add support for Kendryte K210 FPIOA") Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com> Reviewed-by: Sean Anderson <seanga2@gmail.com> |
#
daaf1826 |
|
01-Mar-2022 |
Niklas Cassel <niklas.cassel@wdc.com> |
pinctrl: k210: Fix loop in k210_pc_get_drive() The loop exited too early so the k210_pc_drive_strength[0] array element was never used. Original Linux patch by Dan Carpenter: https://lore.kernel.org/linux-gpio/20220209180804.GA18385@kili/ Fixes: 7224d5ccf8e1 ("pinctrl: Add support for Kendryte K210 FPIOA") Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com> Reviewed-by: Sean Anderson <seanga2@gmail.com> |
#
a6c86ec2 |
|
01-Mar-2022 |
Damien Le Moal <damien.lemoal@opensource.wdc.com> |
k210: dts: align fpioa node with Linux Linux kernel fpioa pinctrl driver expects the sysctl phandle and the power bit offset of the fpioa device to be specified as a single property "canaan,k210-sysctl-power". Replace the "canaan,k210-sysctl" and "canaan,k210-power-offset" properties with "canaan,k210-sysctl-power" to satisfy the Linux kernel requirements. This new property is parsed using the existing function dev_read_phandle_with_args(). Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com> Reviewed-by: Sean Anderson <seanga2@gmail.com> |
#
fd426b31 |
|
01-Mar-2022 |
Damien Le Moal <damien.lemoal@opensource.wdc.com> |
k210: use the board vendor name rather than the marketing name "kendryte" is the marketing name for the K210 RISC-V SoC produced by Canaan Inc. Rather than "kendryte,k210", use the usual "canaan,k210" vendor,SoC compatibility string format in the device tree files and use the SoC name for file names. With these changes, the device tree files are more in sync with the Linux kernel DTS and drivers, making uboot device tree usable by the kernel. Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com> Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com> |
#
c9309f40 |
|
16-Dec-2023 |
Sean Anderson <seanga2@gmail.com> |
treewide: Remove clk_free This function is a no-op. Remove it. Signed-off-by: Sean Anderson <seanga2@gmail.com> Link: https://lore.kernel.org/r/20231216193843.2463779-3-seanga2@gmail.com |
#
aa34e133 |
|
01-Mar-2022 |
Niklas Cassel <niklas.cassel@wdc.com> |
pinctrl: k210: Fix bias-pull-up Using bias-pull-up would actually cause the pin to have its pull-down enabled. Fix this. Original Linux patch by Sean Anderson: https://lore.kernel.org/linux-gpio/20220209182822.640905-1-seanga2@gmail.com/ Fixes: 7224d5ccf8e1 ("pinctrl: Add support for Kendryte K210 FPIOA") Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com> Reviewed-by: Sean Anderson <seanga2@gmail.com> |
#
daaf1826 |
|
01-Mar-2022 |
Niklas Cassel <niklas.cassel@wdc.com> |
pinctrl: k210: Fix loop in k210_pc_get_drive() The loop exited too early so the k210_pc_drive_strength[0] array element was never used. Original Linux patch by Dan Carpenter: https://lore.kernel.org/linux-gpio/20220209180804.GA18385@kili/ Fixes: 7224d5ccf8e1 ("pinctrl: Add support for Kendryte K210 FPIOA") Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com> Reviewed-by: Sean Anderson <seanga2@gmail.com> |
#
a6c86ec2 |
|
01-Mar-2022 |
Damien Le Moal <damien.lemoal@opensource.wdc.com> |
k210: dts: align fpioa node with Linux Linux kernel fpioa pinctrl driver expects the sysctl phandle and the power bit offset of the fpioa device to be specified as a single property "canaan,k210-sysctl-power". Replace the "canaan,k210-sysctl" and "canaan,k210-power-offset" properties with "canaan,k210-sysctl-power" to satisfy the Linux kernel requirements. This new property is parsed using the existing function dev_read_phandle_with_args(). Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com> Reviewed-by: Sean Anderson <seanga2@gmail.com> |
#
fd426b31 |
|
01-Mar-2022 |
Damien Le Moal <damien.lemoal@opensource.wdc.com> |
k210: use the board vendor name rather than the marketing name "kendryte" is the marketing name for the K210 RISC-V SoC produced by Canaan Inc. Rather than "kendryte,k210", use the usual "canaan,k210" vendor,SoC compatibility string format in the device tree files and use the SoC name for file names. With these changes, the device tree files are more in sync with the Linux kernel DTS and drivers, making uboot device tree usable by the kernel. Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com> Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com> |
#
aa34e133 |
|
01-Mar-2022 |
Niklas Cassel <niklas.cassel@wdc.com> |
pinctrl: k210: Fix bias-pull-up Using bias-pull-up would actually cause the pin to have its pull-down enabled. Fix this. Original Linux patch by Sean Anderson: https://lore.kernel.org/linux-gpio/20220209182822.640905-1-seanga2@gmail.com/ Fixes: 7224d5ccf8e1 ("pinctrl: Add support for Kendryte K210 FPIOA") Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com> Reviewed-by: Sean Anderson <seanga2@gmail.com> |
#
daaf1826 |
|
01-Mar-2022 |
Niklas Cassel <niklas.cassel@wdc.com> |
pinctrl: k210: Fix loop in k210_pc_get_drive() The loop exited too early so the k210_pc_drive_strength[0] array element was never used. Original Linux patch by Dan Carpenter: https://lore.kernel.org/linux-gpio/20220209180804.GA18385@kili/ Fixes: 7224d5ccf8e1 ("pinctrl: Add support for Kendryte K210 FPIOA") Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com> Reviewed-by: Sean Anderson <seanga2@gmail.com> |
#
a6c86ec2 |
|
01-Mar-2022 |
Damien Le Moal <damien.lemoal@opensource.wdc.com> |
k210: dts: align fpioa node with Linux Linux kernel fpioa pinctrl driver expects the sysctl phandle and the power bit offset of the fpioa device to be specified as a single property "canaan,k210-sysctl-power". Replace the "canaan,k210-sysctl" and "canaan,k210-power-offset" properties with "canaan,k210-sysctl-power" to satisfy the Linux kernel requirements. This new property is parsed using the existing function dev_read_phandle_with_args(). Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com> Reviewed-by: Sean Anderson <seanga2@gmail.com> |
#
fd426b31 |
|
01-Mar-2022 |
Damien Le Moal <damien.lemoal@opensource.wdc.com> |
k210: use the board vendor name rather than the marketing name "kendryte" is the marketing name for the K210 RISC-V SoC produced by Canaan Inc. Rather than "kendryte,k210", use the usual "canaan,k210" vendor,SoC compatibility string format in the device tree files and use the SoC name for file names. With these changes, the device tree files are more in sync with the Linux kernel DTS and drivers, making uboot device tree usable by the kernel. Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com> Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com> |