stop chowning old drm device nodes

create /dev/ drm nodes with the same names as linux

This was proposed by Emil Velikov to simplify libdrm and will remove the
need for some patches in ports.

/dev/drm0 -> /dev/dri/card0
/dev/drmR128 -> /dev/dri/renderD128

The previous names will remain for a period of time and will later be
removed. Major and minor numbers remain the same.

libdrm will not be changed to use the new names until known privsep
and sandbox use has been updated to allow the new names.

ok deraadt@

Add ttyC4 to lost of devices to change when logging in on ttyC0 (and in
some cases also the serial console) such that X can use it as its VT
when running without root privileges.

ok jsg@, matthieu@

Add first drm render node to list of devices to change when logging in
on ttyC0. While here add drm0 to loongson and add the complete set of
wscons and drm devices to arm64.

ok kettenis@

Give /dev/drm0 to the user logged on the console to be able
to run OpenGL applications. ok kettenis@ naddy@

Remove unused /dev/X0 entries. ok millert@

fix pasto '::' -> ':'. Oops deraadt@ ;-)

when an arch has wskbd0 or wsmouse0, prepare for the future and apply
same rules to both wskbd0:wskbd and wsmouse0:wsmouse; miod ok

tweak fbtabs for /dev/X0 target; ok deraadt@
thanks to nick@openbsd.org for finding this
thanks to nick@openbsd.org, drahn@openbsd.org, and lurene@daemonkitty.net
for testing on short notice!

Add /dev/X0 entry for use by xdm; matthieu@
As requested by deraadt@

even closer to the truth; miod, matthieu, todd

cleanup all fbtab, various ok

Do not put a space in the list of devices to associate with a console
login process. ttyCcfg was not previously initialized properly on login.

The "powerpc" port which has supported the newer Apple Macintosh powerpc based
is being renamed to macppc. This is to allow sharing of common code
between different powerpc base platforms.

Files moved from etc/etc.powerpc to etc/etc.macppc

create /dev/ drm nodes with the same names as linux

This was proposed by Emil Velikov to simplify libdrm and will remove the
need for some patches in ports.

/dev/drm0 -> /dev/dri/card0
/dev/drmR128 -> /dev/dri/renderD128

The previous names will remain for a period of time and will later be
removed. Major and minor numbers remain the same.

libdrm will not be changed to use the new names until known privsep
and sandbox use has been updated to allow the new names.

ok deraadt@

Add ttyC4 to lost of devices to change when logging in on ttyC0 (and in
some cases also the serial console) such that X can use it as its VT
when running without root privileges.

ok jsg@, matthieu@

Add first drm render node to list of devices to change when logging in
on ttyC0. While here add drm0 to loongson and add the complete set of
wscons and drm devices to arm64.

ok kettenis@

Give /dev/drm0 to the user logged on the console to be able
to run OpenGL applications. ok kettenis@ naddy@

Remove unused /dev/X0 entries. ok millert@

fix pasto '::' -> ':'. Oops deraadt@ ;-)

when an arch has wskbd0 or wsmouse0, prepare for the future and apply
same rules to both wskbd0:wskbd and wsmouse0:wsmouse; miod ok

tweak fbtabs for /dev/X0 target; ok deraadt@
thanks to nick@openbsd.org for finding this
thanks to nick@openbsd.org, drahn@openbsd.org, and lurene@daemonkitty.net
for testing on short notice!

Add /dev/X0 entry for use by xdm; matthieu@
As requested by deraadt@

even closer to the truth; miod, matthieu, todd

cleanup all fbtab, various ok

Do not put a space in the list of devices to associate with a console
login process. ttyCcfg was not previously initialized properly on login.

The "powerpc" port which has supported the newer Apple Macintosh powerpc based
is being renamed to macppc. This is to allow sharing of common code
between different powerpc base platforms.

Files moved from etc/etc.powerpc to etc/etc.macppc

Add ttyC4 to lost of devices to change when logging in on ttyC0 (and in
some cases also the serial console) such that X can use it as its VT
when running without root privileges.

ok jsg@, matthieu@

Add first drm render node to list of devices to change when logging in
on ttyC0. While here add drm0 to loongson and add the complete set of
wscons and drm devices to arm64.

ok kettenis@

Give /dev/drm0 to the user logged on the console to be able
to run OpenGL applications. ok kettenis@ naddy@

Remove unused /dev/X0 entries. ok millert@

fix pasto '::' -> ':'. Oops deraadt@ ;-)

when an arch has wskbd0 or wsmouse0, prepare for the future and apply
same rules to both wskbd0:wskbd and wsmouse0:wsmouse; miod ok

tweak fbtabs for /dev/X0 target; ok deraadt@
thanks to nick@openbsd.org for finding this
thanks to nick@openbsd.org, drahn@openbsd.org, and lurene@daemonkitty.net
for testing on short notice!

Add /dev/X0 entry for use by xdm; matthieu@
As requested by deraadt@

even closer to the truth; miod, matthieu, todd

cleanup all fbtab, various ok

Do not put a space in the list of devices to associate with a console
login process. ttyCcfg was not previously initialized properly on login.

The "powerpc" port which has supported the newer Apple Macintosh powerpc based
is being renamed to macppc. This is to allow sharing of common code
between different powerpc base platforms.

Files moved from etc/etc.powerpc to etc/etc.macppc

Add first drm render node to list of devices to change when logging in
on ttyC0. While here add drm0 to loongson and add the complete set of
wscons and drm devices to arm64.

ok kettenis@

Give /dev/drm0 to the user logged on the console to be able
to run OpenGL applications. ok kettenis@ naddy@

Remove unused /dev/X0 entries. ok millert@

fix pasto '::' -> ':'. Oops deraadt@ ;-)

when an arch has wskbd0 or wsmouse0, prepare for the future and apply
same rules to both wskbd0:wskbd and wsmouse0:wsmouse; miod ok

tweak fbtabs for /dev/X0 target; ok deraadt@
thanks to nick@openbsd.org for finding this
thanks to nick@openbsd.org, drahn@openbsd.org, and lurene@daemonkitty.net
for testing on short notice!

Add /dev/X0 entry for use by xdm; matthieu@
As requested by deraadt@

even closer to the truth; miod, matthieu, todd

cleanup all fbtab, various ok

Do not put a space in the list of devices to associate with a console
login process. ttyCcfg was not previously initialized properly on login.

The "powerpc" port which has supported the newer Apple Macintosh powerpc based
is being renamed to macppc. This is to allow sharing of common code
between different powerpc base platforms.

Files moved from etc/etc.powerpc to etc/etc.macppc

Give /dev/drm0 to the user logged on the console to be able
to run OpenGL applications. ok kettenis@ naddy@

Remove unused /dev/X0 entries. ok millert@

fix pasto '::' -> ':'. Oops deraadt@ ;-)

when an arch has wskbd0 or wsmouse0, prepare for the future and apply
same rules to both wskbd0:wskbd and wsmouse0:wsmouse; miod ok

tweak fbtabs for /dev/X0 target; ok deraadt@
thanks to nick@openbsd.org for finding this
thanks to nick@openbsd.org, drahn@openbsd.org, and lurene@daemonkitty.net
for testing on short notice!

Add /dev/X0 entry for use by xdm; matthieu@
As requested by deraadt@

even closer to the truth; miod, matthieu, todd

cleanup all fbtab, various ok

Do not put a space in the list of devices to associate with a console
login process. ttyCcfg was not previously initialized properly on login.

The "powerpc" port which has supported the newer Apple Macintosh powerpc based
is being renamed to macppc. This is to allow sharing of common code
between different powerpc base platforms.

Files moved from etc/etc.powerpc to etc/etc.macppc