more MKREPRO_TIMESTAMP fixes (for pax/tar generated files)

Use ${TOOL_GZIP_N} instead of ${TOOL_GZIP} -n, and similarly
use ${TOOL_GZIP_N} -9 instead of ${TOOL_GZIP} -9n, etc.

This will pass -nT instead of just -n if the gzip program is
actually pigz.

branches: 1.17.2;
Use ${TOOL_GZIP} instead of just gzip in all Makefiles
outside */dist/* subdirectories.

When USE_PIGZGZIP=yes, bsd.own.mk sets TOOL_GZIP=${TOOL_PIGZ},
so there's no need to test USE_PIGZGZIP in these Makefiles.

branches: 1.16.6; 1.16.12;
Consistently use gzip with the -n flag so dates are not embedded.

Not tested on all platforms.

branches: 1.15.2;
In buildfloppies.sh:
* Add a "-N etcdir" command line option, defaulting to /etc.
* Use pax in mtree mode. This is the same idea as the change made in
revision 1.14, with the following changes:
+ use ". type=dir optional" instead of just ". type=dir", so the
output will not contain an explicit entry for the directory.
+ Explicitly set type=file and mode=0444 in the mtree lines.
+ Pass "-N ${etcdir}" to pax to make it use the correct passwd and
group files.
+ Pass "-s^./,," to pax to make it strip the leading "./" from file
names.

In Makefile.tarfloppy:
* Pass "-N ${DESTDIR}/etc" to buildfloppies.sh.

The resulting flopies have been verified to be identical to those
produced by version 1.13 of buildfloppies.sh, except that file owners
and modes are changed.

avoid full path to boot.cfg file when building amd64 boot floppy
share code with i386

branches: 1.13.2;
Change remaining instances of ${RELEASEDIR}/${MACHINES} to
${RELEASEDIR}/${RELEASEMACHINEDIR}

branches: 1.12.18; 1.12.22;
Strip the kernel before it is written to floppy. This will allow to have
unstripped INSTALL kernels in the release.

OK lukem@.

MAKEVERBOSE support

Rename a large chunk of the make(1) variables which refer to a
program/tool from "FOO" to "TOOL_FOO". The new variables are:
TOOL_ASN1_COMPILE TOOL_CAP_MKDB TOOL_CAT TOOL_CKSUM TOOL_COMPILE_ET
TOOL_CONFIG TOOL_CRUNCHGEN TOOL_CTAGS TOOL_DB TOOL_EQN TOOL_FGEN
TOOL_GENCAT TOOL_GROFF TOOL_HEXDUMP TOOL_INDXBIB TOOL_INSTALLBOOT
TOOL_INSTALL_INFO TOOL_M4 TOOL_MAKEFS TOOL_MAKEINFO TOOL_MAKEWHATIS
TOOL_MDSETIMAGE TOOL_MENUC TOOL_MKCSMAPPER TOOL_MKESDB
TOOL_MKLOCALE TOOL_MKMAGIC TOOL_MKTEMP TOOL_MSGC TOOL_MTREE
TOOL_PAX TOOL_PIC TOOL_PREPMKBOOTIMAGE TOOL_PWD_MKDB TOOL_REFER
TOOL_ROFF_ASCII TOOL_ROFF_DVI TOOL_ROFF_HTML TOOL_ROFF_PS
TOOL_ROFF_RAW TOOL_RPCGEN TOOL_SOELIM TOOL_SUNLABEL TOOL_TBL
TOOL_UUDECODE TOOL_VGRIND TOOL_ZIC

For each, provide default in <bsd.sys.mk> of the form:
TOOL_FOO?= foo
and for the ${USETOOLS}=="yes" case in <bsd.own.mk>, provide override:
TOOL_FOO= ${TOOLDIR}/bin/${_TOOL_PREFIX}foo

Document all of these in bsd.README.

This cleans up a chunk of potential (and actual) namespace collision
within our build infrastructure, as well as improves consistency in
the share/mk documentation and provision of appropriate defaults for
each of these variables.

Use ${HOST_SH}

add multiple-include protection.
clean up some comments.

Install release files under "${RELEASEDIR}/${MACHINE}/..." instead of
"${RELEASEDIR}/...".

${RELEASEDIR} is never cleaned , and ${RELEASEDIR}/${MACHINE} is only
cleaned if UPDATE is not defined.

Use release:: instead of release: when multiple release targets may exist

- add support for [-s suffix] to buildfloppies.sh (defaults to "",
rather than the previous ".fs").
- add support for (optional) FLOPPYSUFFIX in Makefile.tarfloppy, and
use appropriately
- remove (now unnecessary) custom release targets in alpha/instkernel/*

yet another distrib overhaul:
- move guts of distrib/Makefile.inc to distrib/common/Makefile.distrib
(fixes problem caused by implicit include of ../Makefile.inc in certain
submake conditions triggered by makefiles not yet in tree)
- removed mkdir of ${RELEASEDIR}/*; rely upon "snap_pre" target of
etc/Makefile to create all the release directories
- renamed RELINSTALL to RELEASE_INSTALL
- renamed FLOPPYINSTDIR to FLOPPY_RELEASEDIR
- renamed MDSETDIR to MDSET_RELEASEDIR
- removed ITARGET
- move release target from top level to appropriate subdirectory
- ensure release target has correct depends
- replace miniroot's IMAGE_MD_POST with common/Makefile.image IMAGEPOSTBUILD
- Makefile.image: add realall: ${IMAGE}

replace _SRC_TOP_ with NETBSDSRCDIR, since the latter is the "public" version

Set PAX in buildfloppies.sh's environment.

Makefile snippet to create bootable ustar floppies

Use ${TOOL_GZIP_N} instead of ${TOOL_GZIP} -n, and similarly
use ${TOOL_GZIP_N} -9 instead of ${TOOL_GZIP} -9n, etc.

This will pass -nT instead of just -n if the gzip program is
actually pigz.

branches: 1.17.2;
Use ${TOOL_GZIP} instead of just gzip in all Makefiles
outside */dist/* subdirectories.

When USE_PIGZGZIP=yes, bsd.own.mk sets TOOL_GZIP=${TOOL_PIGZ},
so there's no need to test USE_PIGZGZIP in these Makefiles.

branches: 1.16.6; 1.16.12;
Consistently use gzip with the -n flag so dates are not embedded.

Not tested on all platforms.

branches: 1.15.2;
In buildfloppies.sh:
* Add a "-N etcdir" command line option, defaulting to /etc.
* Use pax in mtree mode. This is the same idea as the change made in
revision 1.14, with the following changes:
+ use ". type=dir optional" instead of just ". type=dir", so the
output will not contain an explicit entry for the directory.
+ Explicitly set type=file and mode=0444 in the mtree lines.
+ Pass "-N ${etcdir}" to pax to make it use the correct passwd and
group files.
+ Pass "-s^./,," to pax to make it strip the leading "./" from file
names.

In Makefile.tarfloppy:
* Pass "-N ${DESTDIR}/etc" to buildfloppies.sh.

The resulting flopies have been verified to be identical to those
produced by version 1.13 of buildfloppies.sh, except that file owners
and modes are changed.

avoid full path to boot.cfg file when building amd64 boot floppy
share code with i386

branches: 1.13.2;
Change remaining instances of ${RELEASEDIR}/${MACHINES} to
${RELEASEDIR}/${RELEASEMACHINEDIR}

branches: 1.12.18; 1.12.22;
Strip the kernel before it is written to floppy. This will allow to have
unstripped INSTALL kernels in the release.

OK lukem@.

MAKEVERBOSE support

Rename a large chunk of the make(1) variables which refer to a
program/tool from "FOO" to "TOOL_FOO". The new variables are:
TOOL_ASN1_COMPILE TOOL_CAP_MKDB TOOL_CAT TOOL_CKSUM TOOL_COMPILE_ET
TOOL_CONFIG TOOL_CRUNCHGEN TOOL_CTAGS TOOL_DB TOOL_EQN TOOL_FGEN
TOOL_GENCAT TOOL_GROFF TOOL_HEXDUMP TOOL_INDXBIB TOOL_INSTALLBOOT
TOOL_INSTALL_INFO TOOL_M4 TOOL_MAKEFS TOOL_MAKEINFO TOOL_MAKEWHATIS
TOOL_MDSETIMAGE TOOL_MENUC TOOL_MKCSMAPPER TOOL_MKESDB
TOOL_MKLOCALE TOOL_MKMAGIC TOOL_MKTEMP TOOL_MSGC TOOL_MTREE
TOOL_PAX TOOL_PIC TOOL_PREPMKBOOTIMAGE TOOL_PWD_MKDB TOOL_REFER
TOOL_ROFF_ASCII TOOL_ROFF_DVI TOOL_ROFF_HTML TOOL_ROFF_PS
TOOL_ROFF_RAW TOOL_RPCGEN TOOL_SOELIM TOOL_SUNLABEL TOOL_TBL
TOOL_UUDECODE TOOL_VGRIND TOOL_ZIC

For each, provide default in <bsd.sys.mk> of the form:
TOOL_FOO?= foo
and for the ${USETOOLS}=="yes" case in <bsd.own.mk>, provide override:
TOOL_FOO= ${TOOLDIR}/bin/${_TOOL_PREFIX}foo

Document all of these in bsd.README.

This cleans up a chunk of potential (and actual) namespace collision
within our build infrastructure, as well as improves consistency in
the share/mk documentation and provision of appropriate defaults for
each of these variables.

Use ${HOST_SH}

add multiple-include protection.
clean up some comments.

Install release files under "${RELEASEDIR}/${MACHINE}/..." instead of
"${RELEASEDIR}/...".

${RELEASEDIR} is never cleaned , and ${RELEASEDIR}/${MACHINE} is only
cleaned if UPDATE is not defined.

Use release:: instead of release: when multiple release targets may exist

- add support for [-s suffix] to buildfloppies.sh (defaults to "",
rather than the previous ".fs").
- add support for (optional) FLOPPYSUFFIX in Makefile.tarfloppy, and
use appropriately
- remove (now unnecessary) custom release targets in alpha/instkernel/*

yet another distrib overhaul:
- move guts of distrib/Makefile.inc to distrib/common/Makefile.distrib
(fixes problem caused by implicit include of ../Makefile.inc in certain
submake conditions triggered by makefiles not yet in tree)
- removed mkdir of ${RELEASEDIR}/*; rely upon "snap_pre" target of
etc/Makefile to create all the release directories
- renamed RELINSTALL to RELEASE_INSTALL
- renamed FLOPPYINSTDIR to FLOPPY_RELEASEDIR
- renamed MDSETDIR to MDSET_RELEASEDIR
- removed ITARGET
- move release target from top level to appropriate subdirectory
- ensure release target has correct depends
- replace miniroot's IMAGE_MD_POST with common/Makefile.image IMAGEPOSTBUILD
- Makefile.image: add realall: ${IMAGE}

replace _SRC_TOP_ with NETBSDSRCDIR, since the latter is the "public" version

Set PAX in buildfloppies.sh's environment.

Makefile snippet to create bootable ustar floppies

Sync with wrstuden-revivesa-base-2.

Sync with HEAD.

Sync with HEAD.

Pull up following revision(s) (requested by tsutsui in ticket #60):
distrib/amd64/floppies/common/Makefile.bootfloppy: revision 1.10
distrib/i386/floppies/common/Makefile.bootfloppy: revision 1.22
distrib/common/Makefile.tarfloppy: revision 1.14
avoid full path to boot.cfg file when building amd64 boot floppy
share code with i386

Sync with HEAD.

Third (and last) commit. See http://mail-index.netbsd.org/source-changes/2009/05/13/msg221222.html

Rebase to HEAD as of a few days ago.

sync with head.

for a reference, the tree before this commit was tagged
as yamt-pagecache-tag8.

this commit was splitted into small chunks to avoid
a limitation of cvs. ("Protocol error: too many arguments")

Rebase.