#
967747bb |
|
11-Feb-2022 |
Arnd Bergmann <arnd@arndb.de> |
uaccess: remove CONFIG_SET_FS There are no remaining callers of set_fs(), so CONFIG_SET_FS can be removed globally, along with the thread_info field and any references to it. This turns access_ok() into a cheaper check against TASK_SIZE_MAX. As CONFIG_SET_FS is now gone, drop all remaining references to set_fs()/get_fs(), mm_segment_t, user_addr_max() and uaccess_kernel(). Acked-by: Sam Ravnborg <sam@ravnborg.org> # for sparc32 changes Acked-by: "Eric W. Biederman" <ebiederm@xmission.com> Tested-by: Sergey Matyukevich <sergey.matyukevich@synopsys.com> # for arc changes Acked-by: Stafford Horne <shorne@gmail.com> # [openrisc, asm-generic] Acked-by: Dinh Nguyen <dinguyen@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
#
3d13f313 |
|
11-Aug-2020 |
Christoph Hellwig <hch@lst.de> |
uaccess: add force_uaccess_{begin,end} helpers Add helpers to wrap the get_fs/set_fs magic for undoing any damange done by set_fs(KERNEL_DS). There is no real functional benefit, but this documents the intent of these calls better, and will allow stubbing the functions out easily for kernels builds that do not allow address space overrides in the future. [hch@lst.de: drop two incorrect hunks, fix a commit log typo] Link: http://lkml.kernel.org/r/20200714105505.935079-6-hch@lst.de Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Acked-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Greentime Hu <green.hu@gmail.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Nick Hu <nickhu@andestech.com> Cc: Vincent Chen <deanbo422@gmail.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Link: http://lkml.kernel.org/r/20200710135706.537715-6-hch@lst.de Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
d141b8bc |
|
30-Jun-2020 |
Song Liu <songliubraving@fb.com> |
perf: Expose get/put_callchain_entry() Sanitize and expose get/put_callchain_entry(). This would be used by bpf stack map. Suggested-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Song Liu <songliubraving@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20200630062846.664389-2-songliubraving@fb.com
|
#
c50c75e9 |
|
11-May-2020 |
Gustavo A. R. Silva <gustavoars@kernel.org> |
perf/core: Replace zero-length array with flexible-array The current codebase makes use of the zero-length array language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as these ones is a flexible array member[1][2], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being inadvertently introduced[3] to the codebase from now on. Also, notice that, dynamic memory allocations won't be affected by this change: "Flexible array members have incomplete type, and so the sizeof operator may not be applied. As a quirk of the original implementation of zero-length arrays, sizeof evaluates to zero."[1] sizeof(flexible-array-member) triggers a warning because flexible array members have incomplete type[1]. There are some instances of code in which the sizeof operator is being incorrectly/erroneously applied to zero-length arrays and the result is zero. Such instances may be hiding some bugs. So, this work (flexible-array member conversions) will also help to get completely rid of those sorts of issues. This issue was found with the help of Coccinelle. [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://github.com/KSPP/linux/issues/21 [3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour") Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20200511201227.GA14041@embeddedor
|
#
32927393 |
|
24-Apr-2020 |
Christoph Hellwig <hch@lst.de> |
sysctl: pass kernel pointers to ->proc_handler Instead of having all the sysctl handlers deal with user pointers, which is rather hairy in terms of the BPF interaction, copy the input to and from userspace in common code. This also means that the strings are always NUL-terminated by the common code, making the API a little bit safer. As most handler just pass through the data to one of the common handlers a lot of the changes are mechnical. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Andrey Ignatov <rdna@fb.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
#
8e86e015 |
|
15-Jan-2019 |
Thomas Gleixner <tglx@linutronix.de> |
perf/core: Convert to SPDX license identifiers Use proper SPDX license identifiers instead of the bogus reference to kernel-base/COPYING. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kate Stewart <kstewart@linuxfoundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lkml.kernel.org/r/20190116111308.012666937@linutronix.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
#
3723c632 |
|
23-Aug-2018 |
Arnd Bergmann <arnd@arndb.de> |
treewide: convert ISO_8859-1 text comments to utf-8 Almost all files in the kernel are either plain text or UTF-8 encoded. A couple however are ISO_8859-1, usually just a few characters in a C comments, for historic reasons. This converts them all to UTF-8 for consistency. Link: http://lkml.kernel.org/r/20180724111600.4158975-1-arnd@arndb.de Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Simon Horman <horms@verge.net.au> [IPVS portion] Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> [IIO] Acked-by: Michael Ellerman <mpe@ellerman.id.au> [powerpc] Acked-by: Rob Herring <robh@kernel.org> Cc: Joe Perches <joe@perches.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Samuel Ortiz <sameo@linux.intel.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Rob Herring <robh+dt@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
bfb3d7b8 |
|
15-Apr-2018 |
Jiri Olsa <jolsa@kernel.org> |
perf: Remove superfluous allocation error check If the get_callchain_buffers fails to allocate the buffer it will decrease the nr_callchain_events right away. There's no point of checking the allocation error for nr_callchain_events > 1. Removing that check. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: syzkaller-bugs@googlegroups.com Cc: x86@kernel.org Link: http://lkml.kernel.org/r/20180415092352.12403-3-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
#
5af44ca5 |
|
15-Apr-2018 |
Jiri Olsa <jolsa@kernel.org> |
perf: Fix sample_max_stack maximum check The syzbot hit KASAN bug in perf_callchain_store having the entry stored behind the allocated bounds [1]. We miss the sample_max_stack check for the initial event that allocates callchain buffers. This missing check allows to create an event with sample_max_stack value bigger than the global sysctl maximum: # sysctl -a | grep perf_event_max_stack kernel.perf_event_max_stack = 127 # perf record -vv -C 1 -e cycles/max-stack=256/ kill ... perf_event_attr: size 112 ... sample_max_stack 256 ------------------------------------------------------------ sys_perf_event_open: pid -1 cpu 1 group_fd -1 flags 0x8 = 4 Note the '-C 1', which forces perf record to create just single event. Otherwise it opens event for every cpu, then the sample_max_stack check fails on the second event and all's fine. The fix is to run the sample_max_stack check also for the first event with callchains. [1] https://marc.info/?l=linux-kernel&m=152352732920874&w=2 Reported-by: syzbot+7c449856228b63ac951e@syzkaller.appspotmail.com Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: syzkaller-bugs@googlegroups.com Cc: x86@kernel.org Fixes: 97c79a38cd45 ("perf core: Per event callchain limit") Link: http://lkml.kernel.org/r/20180415092352.12403-2-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
#
8cf7e0e2 |
|
07-Jan-2018 |
Jiri Olsa <jolsa@kernel.org> |
perf: Make perf_callchain function static And move it to core.c, because there's no caller of this function other than the one in core.c Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20180107160356.28203-6-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
#
88b0193d |
|
09-May-2017 |
Will Deacon <will@kernel.org> |
perf/callchain: Force USER_DS when invoking perf_callchain_user() Perf can generate and record a user callchain in response to a synchronous request, such as a tracepoint firing. If this happens under set_fs(KERNEL_DS), then we can end up walking the user stack (and dereferencing/saving whatever we find there) without the protections usually afforded by checks such as access_ok. Rather than play whack-a-mole with each architecture's stack unwinding implementation, fix the root of the problem by ensuring that we force USER_DS when invoking perf_callchain_user from the perf core. Reported-by: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by: Will Deacon <will.deacon@arm.com> Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
#
68db0cf1 |
|
08-Feb-2017 |
Ingo Molnar <mingo@kernel.org> |
sched/headers: Prepare for new header dependencies before moving code to <linux/sched/task_stack.h> We are going to split <linux/sched/task_stack.h> out of <linux/sched.h>, which will have to be picked up from other headers and a couple of .c files. Create a trivial placeholder <linux/sched/task_stack.h> file that just maps to <linux/sched.h> to make this patch obviously correct and bisectable. Include the new header in the files that are going to need it. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
#
97c79a38 |
|
28-Apr-2016 |
Arnaldo Carvalho de Melo <acme@redhat.com> |
perf core: Per event callchain limit Additionally to being able to control the system wide maximum depth via /proc/sys/kernel/perf_event_max_stack, now we are able to ask for different depths per event, using perf_event_attr.sample_max_stack for that. This uses an u16 hole at the end of perf_event_attr, that, when perf_event_attr.sample_type has the PERF_SAMPLE_CALLCHAIN, if sample_max_stack is zero, means use perf_event_max_stack, otherwise it'll be bounds checked under callchain_mutex. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Milian Wolff <milian.wolff@kdab.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: Wang Nan <wangnan0@huawei.com> Cc: Zefan Li <lizefan@huawei.com> Link: http://lkml.kernel.org/n/tip-kolmn1yo40p7jhswxwrc7rrd@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
#
c85b0334 |
|
12-May-2016 |
Arnaldo Carvalho de Melo <acme@redhat.com> |
perf core: Separate accounting of contexts and real addresses in a stack trace The perf_sample->ip_callchain->nr value includes all the entries in the ip_callchain->ip[] array, real addresses and PERF_CONTEXT_{KERNEL,USER,etc}, while what the user expects is that what is in the kernel.perf_event_max_stack sysctl or in the upcoming per event perf_event_attr.sample_max_stack knob be honoured in terms of IP addresses in the stack trace. So allocate a bunch of extra entries for contexts, and do the accounting via perf_callchain_entry_ctx struct members. A new sysctl, kernel.perf_event_max_contexts_per_stack is also introduced for investigating possible bugs in the callchain implementation by some arch. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Milian Wolff <milian.wolff@kdab.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: Wang Nan <wangnan0@huawei.com> Cc: Zefan Li <lizefan@huawei.com> Link: http://lkml.kernel.org/n/tip-3b4wnqk340c4sg4gwkfdi9yk@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
#
3e4de4ec |
|
12-May-2016 |
Arnaldo Carvalho de Melo <acme@redhat.com> |
perf core: Add perf_callchain_store_context() helper We need have different helpers to account how many contexts we have in the sample and for real addresses, so do it now as a prep patch, to ease review. Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/n/tip-q964tnyuqrxw5gld18vizs3c@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
#
3b1fff08 |
|
10-May-2016 |
Arnaldo Carvalho de Melo <acme@redhat.com> |
perf core: Add a 'nr' field to perf_event_callchain_context We will use it to count how many addresses are in the entry->ip[] array, excluding PERF_CONTEXT_{KERNEL,USER,etc} entries, so that we can really return the number of entries specified by the user via the relevant sysctl, kernel.perf_event_max_contexts, or via the per event perf_event_attr.sample_max_stack knob. This way we keep the perf_sample->ip_callchain->nr meaning, that is the number of entries, be it real addresses or PERF_CONTEXT_ entries, while honouring the max_stack knobs, i.e. the end result will be max_stack entries if we have at least that many entries in a given stack trace. Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/n/tip-s8teto51tdqvlfhefndtat9r@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
#
cfbcf468 |
|
27-Apr-2016 |
Arnaldo Carvalho de Melo <acme@redhat.com> |
perf core: Pass max stack as a perf_callchain_entry context This makes perf_callchain_{user,kernel}() receive the max stack as context for the perf_callchain_entry, instead of accessing the global sysctl_perf_event_max_stack. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Milian Wolff <milian.wolff@kdab.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: Wang Nan <wangnan0@huawei.com> Cc: Zefan Li <lizefan@huawei.com> Link: http://lkml.kernel.org/n/tip-kolmn1yo40p7jhswxwrc7rrd@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
#
a831100a |
|
10-May-2016 |
Arnaldo Carvalho de Melo <acme@redhat.com> |
perf core: Generalize max_stack sysctl handler So that it can be used for other stack related knobs, such as the upcoming one to tweak the max number of of contexts per stack sample. In all those cases we can only change the value if there are no perf sessions collecting stacks, so they need to grab that mutex, etc. Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/n/tip-8t3fk94wuzp8m2z1n4gc0s17@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
#
c5dfd78e |
|
20-Apr-2016 |
Arnaldo Carvalho de Melo <acme@redhat.com> |
perf core: Allow setting up max frame stack depth via sysctl The default remains 127, which is good for most cases, and not even hit most of the time, but then for some cases, as reported by Brendan, 1024+ deep frames are appearing on the radar for things like groovy, ruby. And in some workloads putting a _lower_ cap on this may make sense. One that is per event still needs to be put in place tho. The new file is: # cat /proc/sys/kernel/perf_event_max_stack 127 Chaging it: # echo 256 > /proc/sys/kernel/perf_event_max_stack # cat /proc/sys/kernel/perf_event_max_stack 256 But as soon as there is some event using callchains we get: # echo 512 > /proc/sys/kernel/perf_event_max_stack -bash: echo: write error: Device or resource busy # Because we only allocate the callchain percpu data structures when there is a user, which allows for changing the max easily, its just a matter of having no callchain users at that point. Reported-and-Tested-by: Brendan Gregg <brendan.d.gregg@gmail.com> Reviewed-by: Frederic Weisbecker <fweisbec@gmail.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: David Ahern <dsahern@gmail.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Milian Wolff <milian.wolff@kdab.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: Wang Nan <wangnan0@huawei.com> Cc: Zefan Li <lizefan@huawei.com> Link: http://lkml.kernel.org/r/20160426002928.GB16708@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
#
568b329a |
|
17-Feb-2016 |
Alexei Starovoitov <ast@kernel.org> |
perf: generalize perf_callchain . avoid walking the stack when there is no room left in the buffer . generalize get_perf_callchain() to be called from bpf helper Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
90eec103 |
|
16-Nov-2015 |
Peter Zijlstra <peterz@infradead.org> |
treewide: Remove old email address There were still a number of references to my old Red Hat email address in the kernel source. Remove these while keeping the Red Hat copyright notices intact. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
#
e0455e19 |
|
22-Aug-2014 |
Andreea-Cristina Bernat <bernat.ada@gmail.com> |
perf/callchain: Replace rcu_assign_pointer() with RCU_INIT_POINTER() The use of "rcu_assign_pointer()" is NULLing out the pointer. According to RCU_INIT_POINTER()'s block comment: "1. This use of RCU_INIT_POINTER() is NULLing out the pointer" it is better to use it instead of rcu_assign_pointer() because it has a smaller overhead. The following Coccinelle semantic patch was used: @@ @@ - rcu_assign_pointer + RCU_INIT_POINTER (..., NULL) Signed-off-by: Andreea-Cristina Bernat <bernat.ada@gmail.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: paulmck@linux.vnet.ibm.com Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Link: http://lkml.kernel.org/r/20140822141536.GA32051@ada Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
#
4a32fea9 |
|
16-Aug-2014 |
Christoph Lameter <cl@linux.com> |
scheduler: Replace __get_cpu_var with this_cpu_ptr Convert all uses of __get_cpu_var for address calculation to use this_cpu_ptr instead. [Uses of __get_cpu_var with cpumask_var_t are no longer handled by this patch] Cc: Peter Zijlstra <peterz@infradead.org> Acked-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Christoph Lameter <cl@linux.com> Signed-off-by: Tejun Heo <tj@kernel.org>
|
#
fc3b86d6 |
|
02-Aug-2013 |
Frederic Weisbecker <fweisbec@gmail.com> |
perf: Roll back callchain buffer refcount under the callchain mutex When we fail to allocate the callchain buffers, we roll back the refcount we did and return from get_callchain_buffers(). However we take the refcount and allocate under the callchain lock but the rollback is done outside the lock. As a result, while we roll back, some concurrent callchain user may call get_callchain_buffers(), see the non-zero refcount and give up because the buffers are NULL without itself retrying the allocation. The consequences aren't that bad but that behaviour looks weird enough and it's better to give their chances to the following callchain users where we failed. Reported-by: Jiri Olsa <jolsa@redhat.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1375460996-16329-2-git-send-email-fweisbec@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
#
90983b16 |
|
22-Jul-2013 |
Frederic Weisbecker <fweisbec@gmail.com> |
perf: Sanitize get_callchain_buffer() In case of allocation failure, get_callchain_buffer() keeps the refcount incremented for the current event. As a result, when get_callchain_buffers() returns an error, we must cleanup what it did by cancelling its last refcount with a call to put_callchain_buffers(). This is a hack in order to be able to call free_event() after that failure. The original purpose of that was to simplify the failure path. But this error handling is actually counter intuitive, ugly and not very easy to follow because one expect to see the resources used to perform a service to be cleaned by the callee if case of failure, not by the caller. So lets clean this up by cancelling the refcount from get_callchain_buffer() in case of failure. And correctly free the event accordingly in perf_event_alloc(). Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1374539466-4799-3-git-send-email-fweisbec@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
#
d0775264 |
|
07-Aug-2012 |
Frederic Weisbecker <fweisbec@gmail.com> |
perf: Add attribute to filter out callchains Introducing following bits to the the perf_event_attr struct: - exclude_callchain_kernel to filter out kernel callchain from the sample dump - exclude_callchain_user to filter out user callchain from the sample dump We need to be able to disable standard user callchain dump when we use the dwarf cfi callchain mode, because frame pointer based user callchains are useless in this mode. Implementing also exclude_callchain_kernel to have complete set of options. Signed-off-by: Jiri Olsa <jolsa@redhat.com> [ Added kernel callchains filtering ] Cc: "Frank Ch. Eigler" <fche@redhat.com> Cc: Arun Sharma <asharma@fb.com> Cc: Benjamin Redelings <benjamin.redelings@nescent.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Frank Ch. Eigler <fche@redhat.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Robert Richter <robert.richter@amd.com> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: Ulrich Drepper <drepper@gmail.com> Link: http://lkml.kernel.org/r/1344345647-11536-7-git-send-email-jolsa@redhat.com Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
#
e6dab5ff |
|
11-Jul-2012 |
Andrew Vagin <avagin@openvz.org> |
perf/trace: Add ability to set a target task for events A few events are interesting not only for a current task. For example, sched_stat_* events are interesting for a task which wakes up. For this reason, it will be good if such events will be delivered to a target task too. Now a target task can be set by using __perf_task(). The original idea and a draft patch belongs to Peter Zijlstra. I need these events for profiling sleep times. sched_switch is used for getting callchains and sched_stat_* is used for getting time periods. These events are combined in user space, then it can be analyzed by perf tools. Inspired-by: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arun Sharma <asharma@fb.com> Signed-off-by: Andrew Vagin <avagin@openvz.org> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1342016098-213063-1-git-send-email-avagin@openvz.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
#
fd45c15f |
|
19-Jan-2012 |
Namhyung Kim <namhyung.kim@lge.com> |
perf: Don't call release_callchain_buffers() if allocation fails When alloc_callchain_buffers() fails, it frees all of entries before return. In addition, calling the release_callchain_buffers() will cause a NULL pointer dereference since callchain_cpu_entries is not set. Signed-off-by: Namhyung Kim <namhyung.kim@lge.com> Acked-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Link: http://lkml.kernel.org/r/1327021966-27688-1-git-send-email-namhyung.kim@lge.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
#
9251f904 |
|
16-Oct-2011 |
Borislav Petkov <borislav.petkov@amd.com> |
perf: Carve out callchain functionality Split the callchain code from the perf events core into a new kernel/events/callchain.c file. This simplifies a bit the big core.c Signed-off-by: Borislav Petkov <borislav.petkov@amd.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> [keep ctx recursion handling inline and use internal headers] Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1318778104-17152-1-git-send-email-fweisbec@gmail.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
|