staging: add missing SPDX lines to Kconfig files

There are a few remaining drivers/staging/*/Kconfig files that do not
have SPDX identifiers in them. Add the correct GPL-2.0 identifier to
them to make scanning tools happy.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: iio: adis16209: Move adis16209 driver out of staging

Move the adis16209 driver out of staging directory and merge to the
mainline IIO subsystem.

Signed-off-by: Shreeya Patel <shreeya.patel23498@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Staging: iio: accel: adis16201: Move adis16201 driver out of staging

Move adis16201 driver out of staging and merge into mainline
IIO subsystem.

Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

staging:iio:accel:sca3000 Move out of staging.

Now the driver is in a reasonable state, lets get it (finally) out
of staging.

Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>

staging:iio:accel:sca3000 move to hybrid hard / soft buffer design.

In a similar fashion to other newer drivers (e.g. ti_am335x), instead
of using the hardware buffer support in IIO to directly access the hardware
fifo, insert a software fifo and feed that from the hardware one when
interrupts occur. This gives a simpler structure to the data flows and
allows more flexibility over how often data is shipped to userspace etc.

This was also the only direct user of the simplistic generalization found
in ring_hw.h so that header is removed.

Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>

staging:iio:lis3l02dq drop separate driver

Retire this venerable driver as the basic support is now in the
generic st-sensors accelerometer driver.

There are a few missing features in the new driver:
* Threshold events.
* Access to the calibration adjustment registers (patch shortly)

In exchange it brings a cleaner and more maintainable code base that actually
gets tested more than once every few years. I'll actually be suprised
if anyone other than me has a board with one of these on that is running
an up to date kernel.

Signed-off-by: Jonathan Cameron <jic23@kernel.org>

staging:iio:adis16220: Remove adis16220 driver

The ADIS16220 part has been obsoleted, which makes it hard to get the
hardware to even test the driver. Considering this there is no expectation
that the driver will be cleaned up and be able to move out of staging, so
remove the driver.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

staging:iio:adis16204: Remove adis16204 driver

The ADIS16204 part has been obsoleted, which makes it hard to get the
hardware to even test the driver. Considering this there is no expectation
that the driver will be cleaned up and be able to move out of staging, so
remove the driver.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

Staging: iio: Allow compile test of GPIO consumers if !GPIOLIB

The GPIO subsystem provides dummy GPIO consumer functions if GPIOLIB is
not enabled. Hence drivers that depend on GPIOLIB, but use GPIO consumer
functionality only, can still be compiled if GPIOLIB is not enabled.

Relax the dependency on GPIOLIB if COMPILE_TEST is enabled, where
appropriate.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: linux-iio@vger.kernel.org
Cc: devel@driverdev.osuosl.org
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

staging: iio: accel: Update Kconfig description with module name information

This patch fixes checkpatch.pl warning.
WARNING: please write a paragraph that describes the config symbol fully

Signed-off-by: Tapasweni Pathak <tapaswenipathak@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Convert selectors of GENERIC_GPIO to GPIOLIB

GENERIC_GPIO is now equivalent to GPIOLIB and features that depended on
GENERIC_GPIO can now depend on GPIOLIB to allow removal of this option.

Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Grant Likely <grant.likely@secretlab.ca>

iio:accel:kxsd9 move out of staging

This is a very simple driver giving basic access to this part over an
spi bus.

Signed-off-by: Jonathan Cameron <jic23@kernel.org>

staging:iio:accel:lis3l02dq remove sw_ring support.

The sw_ring buffer is being removed in favour of the kfifo version.
This is one of only a couple of driver still supporting its use.

This driver will hopefully also be removed in favour of supporting the
part in the unified ST accelerometer driver.

Signed-off-by: Jonathan Cameron <jic23@kernel.org>

staging:iio:adis16240: Use adis library

Use the new adis library for the adis16240 driver. This allows us to completely
scrap the adis16240 buffer and trigger code and more than half of the core
driver code.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

staging:iio:adis16209: Use adis library

Use the new adis library for the adis16209 driver. This allows us to completely
scrap the adis16209 buffer and trigger code and more than half of the core
driver code.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

staging:iio:adis16204: Use adis library

Use the new adis library for the adis16204 driver. This allows us to completely
scrap the adis16204 buffer and trigger code and more than half of the core
driver code.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

staging:iio:adis16203: Use adis library

Use the new adis library for the adis16203 driver. This allows us to completely
scrap the adis16203 buffer and trigger code and more than half of the core
driver code.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

staging:iio:adis16201: Use adis library

Use the new adis library for the adis16201 driver. This allows us to completely
scrap the adis16201 buffer and trigger code and more than half of the core
driver code.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

staging:iio: gpio build dependency fixing

Numerous drivers either had pointless includes of gpio.h
or should have been dependent on GENERIC_GPIO and were not.
Conversion of ads1210 to use array registration triggered
build failures that highlighted all was not well.

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Reported-by: Randy Dunlap <rdunlap@xenotime.net>
Acked-by: Randy Dunlap <rdunlap@xenotime.net>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging:iio: tree wide IIO_RING_BUFFER config symbol to IIO_BUFFER

Functionality is generic, so name is missleading.

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: iio: Move sensor drivers to sub menus

We have a lot of drivers now, so the iio sub menu becomes quite large.
This patch creates sub menus for the different sensors.

Signed-off-by: Manuel Stahl <manuel.stahl@iis.fraunhofer.de>
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging:iio:lis3l02dq allow buffer implementation selection

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: iio: new adis16204 driver

IIO driver for Programmable High-g Digital Impact Sensor and Recorder.

Signed-off-by: Barry Song <barry.song@analog.com>
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: iio: new adis16203 driver

IIO driver for Programmable 360 Degrees Inclinometer adis16203 parts.

Signed-off-by: Barry Song <barry.song@analog.com>
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: iio: new adis16201 driver

IIO driver for dual Axis Accelerometer/inclinometer adis16201 parts.

Signed-off-by: Barry Song <barry.song@analog.com>
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: iio: standardize kconfig/makefile spacing/style

Standardize the spacing/style across the IIO build files:
- comment block in Kconfigs
- newlines at ends of files
- trailing lines at ends of files
- indent with one tab, not spaces or mixed

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: iio: adis16220 vibration sensor driver

Signed-off-by: Barry Song <Barry.Song@analog.com>
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: iio: adis16240 driver

Signed-off-by: Barry Song <Barry.Song@analog.com>
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: iio: adis16209 driver

Signed-off-by: Barry Song <Barry.Song@analog.com>
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: IIO: add selection of IIO_SW_RING to LIS3L02DQ as needed

Here I've kept the selection of IIO_SW_RING separate from
IIO_TRIGGER as it will go away fairly shortly when the ring buffer
type becomes configurable on a per device basis, whereas the
IIO_TRIGGER select will remain. Whether to retain the option to
remove the support for ring buffers entirely is one for after that
support is in place.

Reported-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: iio: Fix up the module build.

Both the max1363 and lis3l02dq modules rely on IIO trigger support in
their ring buffer implementations, which is presently a separate config
option. In the case of IIO_RING_BUFFER=y and IIO_TRIGGER=n, we end up
with the following:

ERROR: "iio_trigger_attach_poll_func" [drivers/staging/iio/adc/max1363.ko] undefined!
ERROR: "iio_trigger_dettach_poll_func" [drivers/staging/iio/adc/max1363.ko] undefined!
ERROR: "iio_trigger_unregister" [drivers/staging/iio/accel/lis3l02dq.ko] undefined!
ERROR: "iio_trigger_notify_done" [drivers/staging/iio/accel/lis3l02dq.ko] undefined!
ERROR: "iio_trigger_read_name" [drivers/staging/iio/accel/lis3l02dq.ko] undefined!
ERROR: "iio_trigger_poll" [drivers/staging/iio/accel/lis3l02dq.ko] undefined!
ERROR: "iio_trigger_attach_poll_func" [drivers/staging/iio/accel/lis3l02dq.ko] undefined!
ERROR: "iio_trigger_register" [drivers/staging/iio/accel/lis3l02dq.ko] undefined!
ERROR: "iio_free_trigger" [drivers/staging/iio/accel/lis3l02dq.ko] undefined!
ERROR: "iio_trigger_dettach_poll_func" [drivers/staging/iio/accel/lis3l02dq.ko] undefined!
ERROR: "iio_allocate_trigger" [drivers/staging/iio/accel/lis3l02dq.ko] undefined!
make[1]: *** [__modpost] Error 1
make: *** [modules] Error 2

This adds an IIO_TRIGGER select for these two drivers conditional on
IIO ring buffer support. Caught with an SH randconfig in -next.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: IIO: VTI sca3000 series accelerometer driver (spi)

Example of how a device with a hardware ring buffer is
handled within IIO.

Changes since V2:
* Moved to new registration functions giving much cleaner
interface.

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: IIO: kxsd9 accelerometer minimal support

This provides only very minimal support for this device.
Note that an alternate driver has been posted to the input
mailing list.

When the original LMKL discussion that led to the descision
to develop IIO occured, the question on whether the differing
requirements of IIO and input drivers made it a good idea
to have unified drivers was left as an open question.
It still is. All opinions on this question welcome.

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: IIO: lis3l02dq accelerometer core support

A later patch in the series will add data ready triggering
and ring buffer support.

This core patch provides an event interface and sysfs
based reading of values.

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>