wifi: ath9k: Remove unnecessary (void*) conversions

No need cast (void *) to (struct owl_ctx *), (struct ath_hw *),
(struct cmd_buf *) or other types.

Signed-off-by: Wu Yunchuan <yunchuan@nfschina.com>
Reviewed-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230919045226.524544-1-yunchuan@nfschina.com

ath: Convert timers to use timer_setup()

In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly.

Cc: Kalle Valo <kvalo@qca.qualcomm.com>
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>

ath9k: Avoid a potential deadlock

Lockdep warns us that sc_pm_lock and cc_lock can cause a deadlock when
cc_lock is acquired by itself with interrupts enabled. Disable irqs
whenever taking cc_lock to avoid this.

[ 19.094524] kworker/u2:0/5 just changed the state of lock:
[ 19.094578] (&(&sc->sc_pm_lock)->rlock){-.-...}, at: [<f836c00e>] ath_isr+0x15e/0x200 [ath9k]
[ 19.094674] but this lock took another, HARDIRQ-unsafe lock in the past:
[ 19.094731] (&(&common->cc_lock)->rlock){+.-...}
[ 19.094741]

and interrupts could create inverse lock ordering between them.

[ 19.094866]
other info that might help us debug this:
[ 19.094926] Possible interrupt unsafe locking scenario:

[ 19.094985] CPU0 CPU1
[ 19.095036] ---- ----
[ 19.095086] lock(&(&common->cc_lock)->rlock);
[ 19.095197] local_irq_disable();
[ 19.095305] lock(&(&sc->sc_pm_lock)->rlock);
[ 19.095423] lock(&(&common->cc_lock)->rlock);
[ 19.095539] <Interrupt>
[ 19.095636] lock(&(&sc->sc_pm_lock)->rlock);
[ 19.095745]
*** DEADLOCK ***

[ 19.095965] 3 locks held by kworker/u2:0/5:
[ 19.096067] #0: ("%s"wiphy_name(local->hw.wiphy)){.+.+.+}, at: [<c1067f37>] process_one_work+0x127/0x580
[ 19.096260] #1: ((&local->dynamic_ps_enable_work)){+.+...}, at: [<c1067f37>] process_one_work+0x127/0x580
[ 19.096447] #2: (&sc->mutex){+.+...}, at: [<f836b8b0>] ath9k_config+0x30/0x1d0 [ath9k]
[ 19.096639]
the shortest dependencies between 2nd lock and 1st lock:
[ 19.096813] -> (&(&common->cc_lock)->rlock){+.-...} ops: 38 {
[ 19.096816] HARDIRQ-ON-W at:
[ 19.096816] __lock_acquire+0x57e/0x1260
[ 19.096816] lock_acquire+0xb1/0x1c0
[ 19.096816] _raw_spin_lock_bh+0x3f/0x50
[ 19.096816] ath_chanctx_set_channel+0xb6/0x2c0 [ath9k]
[ 19.096816] ath9k_config+0xa8/0x1d0 [ath9k]
[ 19.096816] ieee80211_hw_config+0xa8/0x5f0 [mac80211]
[ 19.096816] ieee80211_do_open+0x67a/0x920 [mac80211]
[ 19.096816] ieee80211_open+0x41/0x50 [mac80211]
[ 19.096816] __dev_open+0xab/0x140
[ 19.096816] __dev_change_flags+0x89/0x150
[ 19.096816] dev_change_flags+0x28/0x60
[ 19.096816] do_setlink+0x290/0x890
[ 19.096816] rtnl_newlink+0x7cf/0x8e0
[ 19.096816] rtnetlink_rcv_msg+0xbf/0x1f0
[ 19.096816] netlink_rcv_skb+0xb9/0xe0
[ 19.096816] rtnetlink_rcv+0x1e/0x30
[ 19.096816] netlink_unicast+0x13a/0x2c0
[ 19.096816] netlink_sendmsg+0x290/0x380
[ 19.096816] ___sys_sendmsg+0x1e2/0x280
[ 19.096816] __sys_sendmsg+0x3f/0x80
[ 19.096816] SyS_socketcall+0x58c/0x6b0
[ 19.096816] do_fast_syscall_32+0x96/0x1d0
[ 19.096816] entry_SYSENTER_32+0x4c/0x7b
[ 19.096816] IN-SOFTIRQ-W at:
[ 19.096816] __lock_acquire+0x55a/0x1260
[ 19.096816] lock_acquire+0xb1/0x1c0
[ 19.096816] _raw_spin_lock+0x3c/0x50
[ 19.096816] ath_ps_full_sleep+0x24/0x70 [ath9k]
[ 19.096816] call_timer_fn+0xa4/0x300
[ 19.096816] run_timer_softirq+0x1b1/0x560
[ 19.096816] __do_softirq+0xb0/0x430
[ 19.096816] do_softirq_own_stack+0x33/0x40
[ 19.096816] irq_exit+0xad/0xc0
[ 19.096816] smp_apic_timer_interrupt+0x31/0x40
[ 19.096816] apic_timer_interrupt+0x37/0x3c
[ 19.096816] wp_page_copy+0xb8/0x580
[ 19.096816] do_wp_page+0x64/0x420
[ 19.096816] handle_mm_fault+0x430/0x990
[ 19.096816] __do_page_fault+0x18b/0x430
[ 19.096816] do_page_fault+0xb/0x10
[ 19.096816] common_exception+0x62/0x6a
[ 19.096816] INITIAL USE at:
[ 19.096816] __lock_acquire+0x204/0x1260
[ 19.096816] lock_acquire+0xb1/0x1c0
[ 19.096816] _raw_spin_lock_bh+0x3f/0x50
[ 19.096816] ath_chanctx_set_channel+0xb6/0x2c0 [ath9k]
[ 19.096816] ath9k_config+0xa8/0x1d0 [ath9k]
[ 19.096816] ieee80211_hw_config+0xa8/0x5f0 [mac80211]
[ 19.096816] ieee80211_do_open+0x67a/0x920 [mac80211]
[ 19.096816] ieee80211_open+0x41/0x50 [mac80211]
[ 19.096816] __dev_open+0xab/0x140
[ 19.096816] __dev_change_flags+0x89/0x150
[ 19.096816] dev_change_flags+0x28/0x60
[ 19.096816] do_setlink+0x290/0x890
[ 19.096816] rtnl_newlink+0x7cf/0x8e0
[ 19.096816] rtnetlink_rcv_msg+0xbf/0x1f0
[ 19.096816] netlink_rcv_skb+0xb9/0xe0
[ 19.096816] rtnetlink_rcv+0x1e/0x30
[ 19.096816] netlink_unicast+0x13a/0x2c0
[ 19.096816] netlink_sendmsg+0x290/0x380
[ 19.096816] ___sys_sendmsg+0x1e2/0x280
[ 19.096816] __sys_sendmsg+0x3f/0x80
[ 19.096816] SyS_socketcall+0x58c/0x6b0
[ 19.096816] do_fast_syscall_32+0x96/0x1d0
[ 19.096816] entry_SYSENTER_32+0x4c/0x7b
[ 19.096816] }
[ 19.096816] ... key at: [<f837b694>] __key.61991+0x0/0xffffc96c [ath9k]
[ 19.096816] ... acquired at:
[ 19.096816] lock_acquire+0xb1/0x1c0
[ 19.096816] _raw_spin_lock+0x3c/0x50
[ 19.096816] ath9k_ps_wakeup+0x85/0xe0 [ath9k]
[ 19.096816] ath9k_bss_info_changed+0x2a/0x1b0 [ath9k]
[ 19.096816] ieee80211_bss_info_change_notify+0xf3/0x360 [mac80211]
[ 19.096816] ieee80211_recalc_txpower+0x33/0x40 [mac80211]
[ 19.096816] ieee80211_set_tx_power+0x45/0x1d0 [mac80211]
[ 19.096816] cfg80211_wext_siwtxpower+0xd3/0x350 [cfg80211]
[ 19.096816] ioctl_standard_call+0x4e/0x400
[ 19.096816] wext_handle_ioctl+0xf4/0x190
[ 19.096816] dev_ioctl+0xb7/0x630
[ 19.096816] sock_ioctl+0x13e/0x2d0
[ 19.096816] do_vfs_ioctl+0x84/0x750
[ 19.096816] SyS_ioctl+0x34/0x60
[ 19.096816] do_fast_syscall_32+0x96/0x1d0
[ 19.096816] entry_SYSENTER_32+0x4c/0x7b

[ 19.096816] -> (&(&sc->sc_pm_lock)->rlock){-.-...} ops: 597 {
[ 19.096816] IN-HARDIRQ-W at:
[ 19.096816] __lock_acquire+0x6ae/0x1260
[ 19.096816] lock_acquire+0xb1/0x1c0
[ 19.096816] _raw_spin_lock_irqsave+0x45/0x60
[ 19.096816] ath_isr+0x15e/0x200 [ath9k]
[ 19.096816] __handle_irq_event_percpu+0x44/0x340
[ 19.096816] handle_irq_event_percpu+0x1d/0x50
[ 19.096816] handle_irq_event+0x32/0x60
[ 19.096816] handle_level_irq+0x81/0x100
[ 19.096816] handle_irq+0x9c/0xd0
[ 19.096816] do_IRQ+0x5c/0x120
[ 19.096816] common_interrupt+0x36/0x3c
[ 19.096816] _raw_spin_unlock_irqrestore+0x57/0x70
[ 19.096816] ath9k_config+0x16a/0x1d0 [ath9k]
[ 19.096816] ieee80211_hw_config+0xa8/0x5f0 [mac80211]
[ 19.096816] ieee80211_dynamic_ps_enable_work+0x1c3/0x680 [mac80211]
[ 19.096816] process_one_work+0x1d1/0x580
[ 19.096816] worker_thread+0x31/0x380
[ 19.096816] kthread+0xd9/0x110
[ 19.096816] ret_from_fork+0x19/0x24
[ 19.096816] IN-SOFTIRQ-W at:
[ 19.096816] __lock_acquire+0x55a/0x1260
[ 19.096816] lock_acquire+0xb1/0x1c0
[ 19.096816] _raw_spin_lock_irqsave+0x45/0x60
[ 19.096816] ath9k_ps_wakeup+0x24/0xe0 [ath9k]
[ 19.096816] ath9k_tasklet+0x42/0x260 [ath9k]
[ 19.096816] tasklet_action+0x196/0x1e0
[ 19.096816] __do_softirq+0xb0/0x430
[ 19.096816] do_softirq_own_stack+0x33/0x40
[ 19.096816] irq_exit+0xad/0xc0
[ 19.096816] do_IRQ+0x65/0x120
[ 19.096816] common_interrupt+0x36/0x3c
[ 19.096816] get_page_from_freelist+0x20a/0x970
[ 19.096816] __alloc_pages_nodemask+0xca/0xed0
[ 19.096816] __get_free_pages+0x14/0x30
[ 19.096816] pgd_alloc+0x1d/0x160
[ 19.096816] mm_init.isra.47+0x13a/0x1b0
[ 19.096816] copy_process.part.54+0xb55/0x1700
[ 19.096816] _do_fork+0xd4/0x6a0
[ 19.096816] SyS_clone+0x27/0x30
[ 19.096816] do_fast_syscall_32+0x96/0x1d0
[ 19.096816] entry_SYSENTER_32+0x4c/0x7b
[ 19.096816] INITIAL USE at:
[ 19.096816] __lock_acquire+0x204/0x1260
[ 19.096816] lock_acquire+0xb1/0x1c0
[ 19.096816] _raw_spin_lock_irqsave+0x45/0x60
[ 19.096816] ath9k_ps_wakeup+0x24/0xe0 [ath9k]
[ 19.096816] ath9k_start+0x29/0x1f0 [ath9k]
[ 19.096816] drv_start+0x71/0x270 [mac80211]
[ 19.096816] ieee80211_do_open+0x31f/0x920 [mac80211]
[ 19.096816] ieee80211_open+0x41/0x50 [mac80211]
[ 19.096816] __dev_open+0xab/0x140
[ 19.096816] __dev_change_flags+0x89/0x150
[ 19.096816] dev_change_flags+0x28/0x60
[ 19.096816] do_setlink+0x290/0x890
[ 19.096816] rtnl_newlink+0x7cf/0x8e0
[ 19.096816] rtnetlink_rcv_msg+0xbf/0x1f0
[ 19.096816] netlink_rcv_skb+0xb9/0xe0
[ 19.096816] rtnetlink_rcv+0x1e/0x30
[ 19.096816] netlink_unicast+0x13a/0x2c0
[ 19.096816] netlink_sendmsg+0x290/0x380
[ 19.096816] ___sys_sendmsg+0x1e2/0x280
[ 19.096816] __sys_sendmsg+0x3f/0x80
[ 19.096816] SyS_socketcall+0x58c/0x6b0
[ 19.096816] do_fast_syscall_32+0x96/0x1d0
[ 19.096816] entry_SYSENTER_32+0x4c/0x7b
[ 19.096816] }
[ 19.096816] ... key at: [<f837b67c>] __key.61994+0x0/0xffffc984 [ath9k]
[ 19.096816] ... acquired at:
[ 19.096816] check_usage_forwards+0x118/0x120
[ 19.096816] mark_lock+0x2e4/0x590
[ 19.096816] __lock_acquire+0x6ae/0x1260
[ 19.096816] lock_acquire+0xb1/0x1c0
[ 19.096816] _raw_spin_lock_irqsave+0x45/0x60
[ 19.096816] ath_isr+0x15e/0x200 [ath9k]
[ 19.096816] __handle_irq_event_percpu+0x44/0x340
[ 19.096816] handle_irq_event_percpu+0x1d/0x50
[ 19.096816] handle_irq_event+0x32/0x60
[ 19.096816] handle_level_irq+0x81/0x100
[ 19.096816] handle_irq+0x9c/0xd0
[ 19.096816] do_IRQ+0x5c/0x120
[ 19.096816] common_interrupt+0x36/0x3c
[ 19.096816] _raw_spin_unlock_irqrestore+0x57/0x70
[ 19.096816] ath9k_config+0x16a/0x1d0 [ath9k]
[ 19.096816] ieee80211_hw_config+0xa8/0x5f0 [mac80211]
[ 19.096816] ieee80211_dynamic_ps_enable_work+0x1c3/0x680 [mac80211]
[ 19.096816] process_one_work+0x1d1/0x580
[ 19.096816] worker_thread+0x31/0x380
[ 19.096816] kthread+0xd9/0x110
[ 19.096816] ret_from_fork+0x19/0x24

[ 19.096816]
stack backtrace:
[ 19.096816] CPU: 0 PID: 5 Comm: kworker/u2:0 Not tainted 4.13.0-mgm-ovl+ #51
[ 19.096816] Hardware name: FUJITSU SIEMENS LIFEBOOK S6120/FJNB16C, BIOS Version 1.26 05/10/2004
[ 19.096816] Workqueue: phy0 ieee80211_dynamic_ps_enable_work [mac80211]
[ 19.096816] Call Trace:
[ 19.096816] <IRQ>
[ 19.096816] dump_stack+0x16/0x19
[ 19.096816] print_irq_inversion_bug.part.37+0x16c/0x179
[ 19.096816] check_usage_forwards+0x118/0x120
[ 19.096816] ? ret_from_fork+0x19/0x24
[ 19.096816] ? print_shortest_lock_dependencies+0x1a0/0x1a0
[ 19.096816] mark_lock+0x2e4/0x590
[ 19.096816] ? print_shortest_lock_dependencies+0x1a0/0x1a0
[ 19.096816] __lock_acquire+0x6ae/0x1260
[ 19.096816] lock_acquire+0xb1/0x1c0
[ 19.096816] ? ath_isr+0x15e/0x200 [ath9k]
[ 19.096816] _raw_spin_lock_irqsave+0x45/0x60
[ 19.096816] ? ath_isr+0x15e/0x200 [ath9k]
[ 19.096816] ath_isr+0x15e/0x200 [ath9k]
[ 19.096816] __handle_irq_event_percpu+0x44/0x340
[ 19.096816] handle_irq_event_percpu+0x1d/0x50
[ 19.096816] handle_irq_event+0x32/0x60
[ 19.096816] ? handle_nested_irq+0x100/0x100
[ 19.096816] handle_level_irq+0x81/0x100
[ 19.096816] handle_irq+0x9c/0xd0
[ 19.096816] </IRQ>
[ 19.096816] do_IRQ+0x5c/0x120
[ 19.096816] common_interrupt+0x36/0x3c
[ 19.096816] EIP: _raw_spin_unlock_irqrestore+0x57/0x70
[ 19.096816] EFLAGS: 00000286 CPU: 0
[ 19.096816] EAX: f60a3600 EBX: 00000286 ECX: 00000006 EDX: 00000001
[ 19.096816] ESI: f46c9e68 EDI: f46c8620 EBP: f60b5e8c ESP: f60b5e84
[ 19.096816] DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068
[ 19.096816] ath9k_config+0x16a/0x1d0 [ath9k]
[ 19.096816] ieee80211_hw_config+0xa8/0x5f0 [mac80211]
[ 19.096816] ? ieee80211_hw_config+0x1db/0x5f0 [mac80211]
[ 19.096816] ieee80211_dynamic_ps_enable_work+0x1c3/0x680 [mac80211]
[ 19.096816] ? process_one_work+0x127/0x580
[ 19.096816] ? process_one_work+0x127/0x580
[ 19.096816] process_one_work+0x1d1/0x580
[ 19.096816] ? process_one_work+0x127/0x580
[ 19.096816] worker_thread+0x31/0x380
[ 19.096816] kthread+0xd9/0x110
[ 19.096816] ? process_one_work+0x580/0x580
[ 19.096816] ? kthread_create_on_node+0x30/0x30
[ 19.096816] ret_from_fork+0x19/0x24

Cc: QCA ath9k Development <ath9k-devel@qca.qualcomm.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: netdev@vger.kernel.org
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>

ath9k: rename tx_complete_work to hw_check_work

Also include common MAC alive check. This should make the hang checks
more reliable for modes where beacons are not sent and is used as a
starting point for further hang check improvements

Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>

ath9k: match wait_for_completion_timeout return type

Return type of wait_for_completion_timeout is unsigned long not int.
As time_left is exclusively used for wait_for_completion_timeout here its
type is simply changed to unsigned long.

API conformance testing for completions with coccinelle spatches are being
used to locate API usage inconsistencies:
./drivers/net/wireless/ath/ath9k/link.c:197
int return assigned to unsigned long

Patch was compile tested with x86_64_defconfig + CONFIG_ATH_CARDS=m,

Patch is against 4.1-rc3 (localversion-next is -next-20150514)

Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

cfg80211: remove "channel" from survey names

All of the survey data is (currently) per channel anyway,
so having the word "channel" in the name does nothing. In
the next patch I'll introduce global data to the survey,
where the word "channel" is actually confusing.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>

ath9k: restart hardware after noise floor calibration failure

When NF calibration fails, the radio often becomes deaf. The usual
hardware hang checks do not detect this, so it's better to issue a reset
when that happens.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

ath9k: Move beacon config to channel context

Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

ath9k: Add channel context worker thread

The channel context worker is used to switch to next requested
channel context.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

ath9k: Add channel context structure

The channel context structure is defined to enable
multi-channel concurrency support.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

ath9k: move sc_flags to ath_common

we will need it for ath9k_htc, may be other drivers too

Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

ath9k: Fix "cc_lock" usage

IRQ save/restore is not required for the cycle counters
since they are accessed only from softirq and process context.

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

ath9k: Remove RX Poll

This patch removes the convoluted and hacky method of
monitoring for connectivity. We rely on mac80211's connection
loss logic and doing it in the driver is not necessary.

The HW check for MAC/BB hangs is also simplified, there
is no need to have a separate work instance for it.

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

ath9k: add TX99 support

TX99 support enables Specific Absorption Rate (SAR) testing.
SAR is the unit of measurement for the amount of radio frequency(RF)
absorbed by the body when using a wireless device. The RF
exposure limits used are expressed in the terms of SAR, which is a
measure of the electric and magnetic field strength and power density
for transmitters operating at frequencies from 300 kHz to 100 GHz.

Regulatory bodies around the world require that wireless device
be evaluated to meet the RF exposure limits set forth in the
governmental SAR regulations.

In the examples below, for more bit rate options see the iw TX bitrate
setting documentation:

http://wireless.kernel.org/en/users/Documentation/iw#Modifying_transmit_bitrates

Example usage:

iw phy phy0 interface add moni0 type monitor
ip link set dev moni0 up

iw dev moni0 set channel 36 HT40+
iw set bitrates mcs-5 4

echo 10 > /sys/kernel/debug/ieee80211/phy0/ath9k/tx99_power
echo 1 > /sys/kernel/debug/ieee80211/phy0/ath9k/tx99

Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

ath9k: add noise floor parameter to ath9k_hw_getchan_noise

Add nf parameter to ath9k_hw_getchan_noise() in order to compute NF for EXT
chains with the same scale of noise floor calculated on CTL chains.
ath9k_hw_getchan_noise() will be used in ath_process_fft() for spectral scan on
HT40 channels

Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

ath9k: Use bitops for calibration flags

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

ath9k: Fix TX poll work locking

There is no need to call ath_txq_unlock_complete() in the
TX poll routine - frame completion is not done here,
so use ath_txq_unlock().

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

ath9k: Simplify ANI initialization

The check "enable_ani" is not required since it is always
set to true and the logic for disabling/enabling ANI via
debugfs is done at a higher layer.

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

ath9k: Remove MAC_DEBUG

This option has not been enabled by default in any
distribution, has never been enabled in OpenWrt and no developer
has asked for this information in a bug report.

Dumping pages of random values doesn't help debugging,
remove this option (along with the vmalloc() abuse).

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

ath9k: avoid queueing hw check work when suspended

The following issue was reported.

WARNING: at net/mac80211/util.c:599 ieee80211_can_queue_work.isra.7+0x32/0x40 [mac80211]()
Hardware name: iMac12,1
queueing ieee80211 work while going to suspend
Pid: 0, comm: swapper/0 Tainted: PF O 3.8.2-206.fc18.x86_64 #1
Call Trace: Mar 16 09:39:17 Parags-iMac kernel: [ 3993.642992] <IRQ>
[<ffffffff8105e61f>] warn_slowpath_common+0x7f/0xc0
[<ffffffffa0581420>] ? ath_start_rx_poll+0x70/0x70 [ath9k]
<ffffffff8105e716>] warn_slowpath_fmt+0x46/0x50
[<ffffffffa045b542>] ieee80211_can_queue_work.isra.7+0x32/0x40

Fix this by avoiding to queue the work if our device has
already been marked as suspended or stopped.

Reported-by: Parag Warudkar <parag.lkml@gmail.com>
Tested-by: Parag Warudkar <parag.lkml@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

mac80211: Use a cfg80211_chan_def in ieee80211_hw_conf_chan

Drivers that don't use chanctxes cannot perform VHT association because
they still use a "backward compatibility" pair of {ieee80211_channel,
nl80211_channel_type} in ieee80211_conf and ieee80211_local.

Signed-off-by: Karl Beldan <karl.beldan@rivierawaves.com>
[fix kernel-doc]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

ath9k: limit tx path hang check to normal data queues

The beacon and multicast-buffer queues are managed by the beacon
tasklet, and the generic tx path hang check does not help in any way
here. Running it on those queues anyway can introduce some race
conditions leading to unnecessary chip resets.

Cc: stable@vger.kernel.org
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

ath9k_hw: Add HW cap for PAPRD

Add a HW capability to indicate whether PAPRD is enabled
for the card, since PAPRD could be enabled in the EEPROM, but
disabled in the driver. This makes things clearer.

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

ath9k: Fix redundant PS wrappers

Move the PowerSave wrappers outside ath_paprd_activate(),
since they are already being used in ath_paprd_calibrate().

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

ath9k: Add a few debug messages for PAPRD

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

ath9k: Fix the 'xmit' debugfs file

The 'xmit' debugfs file has become big and unwieldy, fix
multiple issues with its usage:

* Store TX counters/statistics only for the 4 Access Categories.
Use IEEE80211_NUM_ACS instead of ATH9K_NUM_TX_QUEUES.

* Move various utility macros to debug.h, they can be reused
elsewhere.

* Remove tx_complete_poll_work_seen.

* Remove code that accesses various internal queue-specific
variables without any locking whatsoever. HW/SW queue details
will be handled in a subsequent patch.

* Do not print internal values like txq_headidx and txq_headidx.
They were mostly unused anyway, considering code like:
PRX("txq_tailidx: ", txq_headidx);

* Handle 'txprocdesc' for EDMA too.

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

ath9k/ath9k_htc: Remove WME macros

Use the macros provided by mac80211 and remove redundant
declarations inside the drivers.

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

ath9k: perform ANI cycle in idle state

As of now the ANI cycle is executed only when the chip is awake.
On idle state case, the station wakes up from network sleep for
beacon reception. Since most of the time, ANI cycle is not syncing
with beacon wakeup, ANI cycle is ignored. Approx 5 mins once, the
calibration is performed. This could affect the connection stability
when the station is idle for long. Even though the OFDM and CCK phy
error rates are too high, ANI is unable to tune its immunity level
as quick enough due to rare execution.

Here the experiment shows that OFDM and CCK levels are at default
even on higher phy error rate.

listenTime=44 OFDM:3 errs=121977/s CCK:2 errs=440818/s ofdm_turn=1

This change ensures that ANI calibration will be exectued atleast
once for every 10 seconds. The below result shows improvements and
immunity levels are adopted quick enough.

listenTime=557 OFDM:4 errs=752/s CCK:4 errs=125/s ofdm_turn=0

Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

ath9k: make PA linearization optional, disabled by default and fix checks

Some checks for PA linearization support checked ATH9K_HW_CAP_PAPRD and some
used the EEPROM ops, leading to issues in tx power handling, since those
two can be out of sync.

Disable the feature by default, since it has been reported that it can
cause damage to the rx path under some circumstances. It can now be enabled
for testing via debugfs.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

ath9k: fix PA linearization calibration related crash

Before PAPRD training can run, the card needs to have sent a packet for
thermal calibration. Sending a dummy packet with the PAPRD training flag
set causes a crash under some circumstance.
Fix the code by replacing the dummy tx with a delay that waits for a
real packet tx to have occurred.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

ath9k_hw: calibrate PA input for PA predistortion

Re-train if the calibrated PA linearization curve is out of bounds
(affects AR933x and AR9485).

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

ath9k: Fix race in reset-work usage

Using work_pending() to defer certain operations when
a HW-reset work has been queued is racy since the check
would return false when the work item is actually in
execution. Use SC_OP_HW_RESET instead to fix this race.
Also, unify the reset debug statistics maintenance.

Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com>
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

ath9k: Fix ANI management

Currently, there are problems with how ANI is handled in
multi-VIF scenarios. This patch addresses them by unifying
the start/stop logic.

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

ath9k: do not sampling on ani timer when chip is in sleep

The baseband and cycle counters are being sampled during ani
processing for debugging purpose. Whenever the ani is postponded
due to sleep state, taking samples on that time is of no use and
also unneccesarily waking up the chip might increase the power
consumption on idle associated state. Hence moving debug function
within powersave block.

Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

ath9k: Fix softlockup in AR9485

steps to recreate:
load latest ath9k driver with AR9485
stop the network-manager and wpa_supplicant
bring the interface up

Call Trace:
[<ffffffffa0517490>] ? ath_hw_check+0xe0/0xe0 [ath9k]
[<ffffffff812cd1e8>] __const_udelay+0x28/0x30
[<ffffffffa03bae7a>] ar9003_get_pll_sqsum_dvc+0x4a/0x80 [ath9k_hw]
[<ffffffffa05174eb>] ath_hw_pll_work+0x5b/0xe0 [ath9k]
[<ffffffff810744fe>] process_one_work+0x11e/0x470
[<ffffffff8107530f>] worker_thread+0x15f/0x360
[<ffffffff810751b0>] ? manage_workers+0x230/0x230
[<ffffffff81079af3>] kthread+0x93/0xa0
[<ffffffff815fd3a4>] kernel_thread_helper+0x4/0x10
[<ffffffff81079a60>] ? kthread_freezable_should_stop+0x70/0x70
[<ffffffff815fd3a0>] ? gs_change+0x13/0x13

ensure that the PLL-WAR for AR9485/AR9340 is executed only if the STA is
associated (or) IBSS/AP mode had started beaconing. Ideally this WAR
is needed to recover from some rare beacon stuck during stress testing.
Before the STA is associated/IBSS had started beaconing, PLL4(0x1618c)
always seem to have zero even though we had configured PLL3(0x16188) to
query about PLL's locking status. When we keep on polling infinitely PLL4's
8th bit(ie check for PLL locking measurements is done), machine hangs
due to softlockup.

fixes https://bugzilla.redhat.com/show_bug.cgi?id=811142

Reported-by: Rolf Offermanns <rolf.offermanns@gmx.net>
Cc: stable@vger.kernel.org
Tested-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com>
Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

ath9k: Use atomic operations

The 'sc_flags' variable is being used in a number of places
with no locking whatsoever. This patch converts the usage
of sc_flags to atomic ops.

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

ath9k: Fix work handling

* Currently, there is no synchronization between the reset
work and the tx-poll work. Fix this and make sure that we
bail out properly if a reset work is in progress.

* Cleanup the PLL WAR and enable it for AR9340 too and
use a helper for restarting work/timers after a reset.

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

ath9k: Group link monitoring logic

Add link.c and move all the link/connection monitoring
code to it.

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>