#
0a44dfc0 |
|
29-Jan-2024 |
Johannes Berg <johannes.berg@intel.com> |
wifi: mac80211: simplify non-chanctx drivers There are still surprisingly many non-chanctx drivers, but in mac80211 that code is a bit awkward. Simplify this by having those drivers assign 'emulated' ops, so that the mac80211 code can be more unified between non-chanctx/chanctx drivers. This cuts the number of places caring about it by about 15, which are scattered across - now they're fewer and no longer in the channel context handling. Link: https://msgid.link/20240129194108.6d0ead50f5cf.I60d093b2fc81ca1853925a4d0ac3a2337d5baa5b@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
#
3b86f86d |
|
14-Aug-2023 |
Arnd Bergmann <arnd@arndb.de> |
wifi: ath: remove unused-but-set parameter This has never been used since the driver was merged, but it now causes a W=1 warning in recent clang versions drivers/net/wireless/ath/ath9k/main.c:1566:21: error: parameter 'changed_flags' set but not used [-Werror,-Wunused-but-set-parameter] drivers/net/wireless/ath/ath9k/htc_drv_main.c:1258:25: error: parameter 'changed_flags' set but not used [-Werror,-Wunused-but-set-parameter] drivers/net/wireless/ath/ath5k/mac80211-ops.c:367:62: error: parameter 'changed_flags' set but not used [-Werror,-Wunused-but-set-parameter] Remove the bit manipulation on the otherwise unused parameter. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Jeff Johnson <quic_jjohnson@quicinc.com> Acked-by: Toke Høiland-Jørgensen <toke@toke.dk> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230814073255.1065242-1-arnd@kernel.org
|
#
b2fd72aa |
|
31-Jul-2023 |
Ruan Jinjie <ruanjinjie@huawei.com> |
wifi: ath9k: Remove unnecessary ternary operators Ther are a little ternary operators, the true or false judgement of which is unnecessary in C language semantics. Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com> Acked-by: Toke Høiland-Jørgensen <toke@toke.dk> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230731124455.2039184-1-ruanjinjie@huawei.com
|
#
a790cc3a |
|
09-Oct-2022 |
Alexander Wetzel <alexander@wetzel-home.de> |
wifi: mac80211: add wake_tx_queue callback to drivers mac80211 is fully switching over to the internal TX queue (iTXQ) implementation. Update all drivers not yet providing the now mandatory wake_tx_queue() callback. As an side effect the netdev interfaces of all updated drivers will switch to the noqueue qdisc. Signed-off-by: Alexander Wetzel <alexander@wetzel-home.de> [add staging drivers] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
#
b3e2130b |
|
24-Jun-2022 |
Johannes Berg <johannes.berg@intel.com> |
wifi: mac80211: change QoS settings API to take link into account Take the link into account in the QoS settings (EDCA parameters) APIs. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
#
7b7090b4 |
|
24-May-2022 |
Johannes Berg <johannes.berg@intel.com> |
wifi: mac80211: split bss_info_changed method Split the bss_info_changed method to vif_cfg_changed and link_info_changed, with the latter getting a link ID. Also change the 'changed' parameter to u64 already, we know we need that. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
#
f276e20b |
|
10-May-2022 |
Johannes Berg <johannes.berg@intel.com> |
wifi: mac80211: move interface config to new struct We'll use bss_conf for per-link configuration later, so move out all the non-link-specific data out into a new struct ieee80211_vif_cfg used in the vif. Some adjustments were done with the following spatch: @@ expression sdata; struct ieee80211_vif *vifp; identifier var = { assoc, ibss_joined, aid, arp_addr_list, arp_addr_cnt, ssid, ssid_len, s1g, ibss_creator }; @@ ( -sdata->vif.bss_conf.var +sdata->vif.cfg.var | -vifp->bss_conf.var +vifp->cfg.var ) @bss_conf@ struct ieee80211_bss_conf *bss_conf; identifier var = { assoc, ibss_joined, aid, arp_addr_list, arp_addr_cnt, ssid, ssid_len, s1g, ibss_creator }; @@ -bss_conf->var +vif_cfg->var (though more manual fixups were needed, e.g. replacing "vif_cfg->" by "vif->cfg." in many files.) Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
#
046d2e7c |
|
04-Apr-2022 |
Sriram R <quic_srirrama@quicinc.com> |
mac80211: prepare sta handling for MLO support Currently in mac80211 each STA object is represented using sta_info datastructure with the associated STA specific information and drivers access ieee80211_sta part of it. With MLO (Multi Link Operation) support being added in 802.11be standard, though the association is logically with a single Multi Link capable STA, at the physical level communication can happen via different advertised links (uniquely identified by Channel, operating class, BSSID) and hence the need to handle multiple link STA parameters within a composite sta_info object called the MLD STA. The different link STA part of MLD STA are identified using the link address which can be same or different as the MLD STA address and unique link id based on the link vif. To support extension of such a model, the sta_info datastructure is modified to hold multiple link STA objects with link specific params currently within sta_info moved to this new structure. Similarly this is done for ieee80211_sta as well which will be accessed within mac80211 as well as by drivers, hence trivial driver changes are expected to support this. For current non MLO supported drivers, only one link STA is present and link information is accessed via 'deflink' member. For MLO drivers, we still need to define the APIs etc. to get the correct link ID and access the correct part of the station info. Currently in mac80211, all link STA info are accessed directly via deflink. These will be updated to access via link pointers indexed by link id with MLO support patches, with link id being 0 for non MLO supported cases. Except for couple of macro related changes, below spatch takes care of updating mac80211 and driver code to access to the link STA info via deflink. @ieee80211_sta@ struct ieee80211_sta *s; struct sta_info *si; identifier var = {supp_rates, ht_cap, vht_cap, he_cap, he_6ghz_capa, eht_cap, rx_nss, bandwidth, txpwr}; @@ ( s-> - var + deflink.var | si->sta. - var + deflink.var ) @sta_info@ struct sta_info *si; identifier var = {gtk, pcpu_rx_stats, rx_stats, rx_stats_avg, status_stats, tx_stats, cur_max_bandwidth}; @@ ( si-> - var + deflink.var ) Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Link: https://lore.kernel.org/r/1649086883-13246-1-git-send-email-quic_srirrama@quicinc.com [remove MLO-drivers notes from commit message, not clear yet; run spatch] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
#
144cd24d |
|
14-Dec-2020 |
Jouni Malinen <jouni@codeaurora.org> |
ath: Modify ath_key_delete() to not need full key entry tkip_keymap can be used internally to avoid the reference to key->cipher and with this, only the key index value itself is needed. This allows ath_key_delete() call to be postponed to be handled after the upper layer STA and key entry have already been removed. This is needed to make ath9k key cache management safer. Signed-off-by: Jouni Malinen <jouni@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201214172118.18100-5-jouni@codeaurora.org
|
#
2a9311b5 |
|
26-Apr-2020 |
Jouni Malinen <jouni@codeaurora.org> |
ath9k_htc: Set RX filter based to allow broadcast Action frame RX Advertise support for multicast frame registration and update the RX filter based on the recently added FIF_MCAST_ACTION to allow broadcast Action frames to be received. This is needed for Device Provisioning Protocol (DPP) use cases that use broadcast Public Action frames. Signed-off-by: Jouni Malinen <jouni@codeaurora.org> Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200426084733.7889-2-jouni@codeaurora.org
|
#
2ce113de |
|
02-Oct-2019 |
Johannes Berg <johannes.berg@intel.com> |
mac80211: simplify TX aggregation start There really is no need to make drivers call the ieee80211_start_tx_ba_cb_irqsafe() function and then schedule the worker if all we want is to set a bit. Add a new return value (that was previously considered invalid) to indicate that the driver is immediately ready for the session, and make drivers use it. The only drivers that remain different are the Intel ones as they need to negotiate more with the firmware. Link: https://lore.kernel.org/r/1570007543-I152912660131cbab2e5d80b4218238c20f8a06e5@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
#
413fd2f5 |
|
05-Dec-2017 |
Dan Carpenter <dan.carpenter@oracle.com> |
ath9k_htc: Add a sanity check in ath9k_htc_ampdu_action() Smatch generates a warning here: drivers/net/wireless/ath/ath9k/htc_drv_main.c:1688 ath9k_htc_ampdu_action() error: buffer overflow 'ista->tid_state' 8 <= 15 I don't know if it's a real bug or not but the other paths through this function all ensure that "tid" is less than ATH9K_HTC_MAX_TID (8) so checking here makes things more consistent. Fixes: fb9987d0f748 ("ath9k_htc: Support for AR9271 chipset.") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
|
#
50c8cd44 |
|
31-Aug-2017 |
Himanshu Jha <himanshujha199640@gmail.com> |
ath9k: remove cast to void pointer casting to void pointer from any pointer type and vice-versa is done implicitly and therefore casting is not needed in such a case. Done using Coccinellle. Semantic Patch used : @r@ expression x; void* e; type T; identifier f; @@ ( *((T *)e) | ((T *)x)[...] | ((T *)x)->f | - (T *) e ) Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
|
#
f286dd89 |
|
01-Jan-2016 |
Markus Elfring <elfring@users.sourceforge.net> |
ath9k_htc: Replace a variable initialisation by an assignment in ath9k_htc_set_channel() Replace an explicit initialisation for one local variable at the beginning by a conditional assignment. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Reviewed-by: Oleksij Rempel <linux@rempel-privat.de> Reviewed-by: Julian Calaby <julian.calaby@gmail.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
|
#
57fbcce3 |
|
12-Apr-2016 |
Johannes Berg <johannes.berg@intel.com> |
cfg80211: remove enum ieee80211_band This enum is already perfectly aliased to enum nl80211_band, and the only reason for it is that we get IEEE80211_NUM_BANDS out of it. There's no really good reason to not declare the number of bands in nl80211 though, so do that and remove the cfg80211 one. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
#
50ea05ef |
|
30-Dec-2015 |
Sara Sharon <sarasharon1@gmail.com> |
mac80211: pass block ack session timeout to to driver Currently mac80211 does not inform the driver of the session block ack timeout when starting a rx aggregation session. Drivers that manage the reorder buffer need to know this parameter. Seeing that there are now too many arguments for the drv_ampdu_action() function, wrap them inside a structure. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
#
5c352bf0 |
|
14-Dec-2015 |
Andrzej Hajda <a.hajda@samsung.com> |
ath9k_htc: fix handling return value of ath9k_hw_calibrate The function can return negative values in case of error. Its result should be then tested for such case. The problem has been detected using proposed semantic patch scripts/coccinelle/tests/assign_signed_to_unsigned.cocci [1]. [1]: http://permalink.gmane.org/gmane.linux.kernel/2046107 Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
|
#
e3abc8ff |
|
16-Aug-2015 |
Emmanuel Grumbach <emmanuel.grumbach@intel.com> |
mac80211: allow to transmit A-MSDU within A-MPDU Advertise the capability to send A-MSDU within A-MPDU in the AddBA request sent by mac80211. Let the driver know about the peer's capabilities. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
#
14250640 |
|
13-Aug-2015 |
Oleksij Rempel <linux@rempel-privat.de> |
ath9k_htc: do ani shortcalibratio if we got -ETIMEDOUT current code will handle -ETIMEDOUT as success which is probalbly wrong. According to this comment I assume it is safe to handle -ETIMEDOUT as false: drivers/net/wireless/ath/ath9k/calib.c 290 /* 291 * We timed out waiting for the noisefloor to load, probably due to an 292 * in-progress rx. Simply return here and allow the load plenty of time 293 * to complete before the next calibration interval. We need to avoid 294 * trying to load -50 (which happens below) while the previous load is 295 * still in progress as this can cause rx deafness. Instead by returning 296 * here, the baseband nf cal will just be capped by our present 297 * noisefloor until the next calibration timer. 298 */ Since no other error wariants are present, this patch is checking only for (ret <= 0). Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
|
#
f0e44962 |
|
09-Jun-2015 |
Chun-Yeow Yeoh <yeohchunyeow@gmail.com> |
ath9k_htc: add support of channel switch Add the support of channel switching functionality, similar to ath9k support. Tested with TP-Link TL-WN722N and TL-WN821N. Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
|
#
df140465 |
|
22-Apr-2015 |
Johannes Berg <johannes.berg@intel.com> |
mac80211: remove support for IFF_PROMISC This support is essentially useless as typically networks are encrypted, frames will be filtered by hardware, and rate scaling will be done with the intended recipient in mind. For real monitoring of the network, the monitor mode support should be used instead. Removing it removes a lot of corner cases. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
#
93803b33 |
|
02-Mar-2015 |
Joe Perches <joe@perches.com> |
wireless: Use eth_<foo>_addr instead of memset Use the built-in function instead of memset. Miscellanea: Add #include <linux/etherdevice.h> where appropriate Use ETH_ALEN instead of 6 Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
a344d677 |
|
12-Jun-2014 |
Johannes Berg <johannes.berg@intel.com> |
mac80211: allow drivers to support NL80211_SCAN_FLAG_RANDOM_ADDR Allow drivers to support NL80211_SCAN_FLAG_RANDOM_ADDR with software based scanning and generate a random MAC address for them for every scan request with the flag. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
#
e6510b11 |
|
15-Nov-2014 |
Chun-Yeow Yeoh <yeohchunyeow@gmail.com> |
ath9k|ath9k_htc: Seperate the software crypto flag for Tx and Rx Use the sw_mgmt_crypto_tx flag to trigger the CCMP encryption for transmitted management frames to be done in software while the sw_mgmt_crypto_rx flag is used to trigger the CCMP decryption for received management frames to be done in software. Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
911544f6 |
|
06-Nov-2014 |
Oleksij Rempel <linux@rempel-privat.de> |
ath9k_htc: trigger spectral scan on set_channel Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
a4bcaf55 |
|
04-Sep-2014 |
Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> |
mac80211: extend set_coverage_class signature Extend mac80211 set_coverage_class API in order to enable ACK timeout estimation algorithm (dynack) passing coverage class equals to -1 to lower drivers. Synchronize set_coverage_class routine signature with mac80211 function pointer for p54, ath9k, ath9k_htc and ath5k drivers. Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
#
faf1dc64 |
|
14-May-2014 |
Rajkumar Manoharan <rmanohar@qti.qualcomm.com> |
ath9k_htc: Stop ANI before doing hw_reset During remain on channel request, ANI worker thread is not stopped before doing hw reset. This is causing kernel crash in hw_per_calibration. This change ensures that ANI is stopped before doing chip reset and it will be rescheduled later when the chip is configured back to home channel and having valid bss. Reported-by: David Herrmann <dh.herrmann@gmail.com> Tested-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
cc24c86f |
|
01-Mar-2014 |
Oleksij Rempel <linux@rempel-privat.de> |
ath9k_htc: sync beacon slot code with ath9k we will need it for common-beacon Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
c35ccb38 |
|
01-Mar-2014 |
Oleksij Rempel <linux@rempel-privat.de> |
ath9k_htc: add ATH_OP_PRIM_STA_VIF we will need it to make common-beacon code work. Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
92c3f7ef |
|
01-Mar-2014 |
Oleksij Rempel <linux@rempel-privat.de> |
ath9k_htc: use common->op_flags Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
88a4f56e |
|
01-Mar-2014 |
Oleksij Rempel <linux@rempel-privat.de> |
ath9k_htc: use ath_beacon_conf.enable_beacon to reduce difference between ath9k and ath9k_htc Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
e5ba18c6 |
|
04-Feb-2014 |
Oleksij Rempel <linux@rempel-privat.de> |
ath9k_htc: use ath9k_cmn_process_rssi Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
a243de48 |
|
03-Feb-2014 |
Stanislaw Gruszka <sgruszka@redhat.com> |
ath9k_htc: avoid scheduling while atomic on sta_rc_update mac80211 ->sta_rc_update() callback must be atomic. Since we have to take mutex and do other operations that can sleep when sending fimrware commands to device, the only option to satisfy atomicity requirement of ->sta_rc_update(), that I can see, is introduce work_struct and defer uploading new rates to that work. Tested-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
2fa4cb90 |
|
28-Jan-2014 |
Stanislaw Gruszka <sgruszka@redhat.com> |
ath9k_htc: make ->sta_rc_update atomic for most calls sta_rc_update() callback must be atomic, hence we can not take mutexes or do other operations, which can sleep in ath9k_htc_sta_rc_update(). I think we can just return from ath9k_htc_sta_rc_update(), if it is called without IEEE80211_RC_SUPP_RATES_CHANGED bit. That will help with scheduling while atomic bug for most cases (except mesh and IBSS modes). For mesh and IBSS I do not see other solution like creating additional workqueue, because sending firmware command require us to sleep, but this can be done in additional patch. Patch partially fixes bug: https://bugzilla.redhat.com/show_bug.cgi?id=990955 Cc: stable@vger.kernel.org Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
657eb17d |
|
27-Nov-2013 |
Mathy Vanhoef <vanhoefm@gmail.com> |
ath9k_htc: properly set MAC address and BSSID mask Pick the MAC address of the first virtual interface as the new hardware MAC address. Set BSSID mask according to this MAC address. This fixes CVE-2013-4579. Signed-off-by: Mathy Vanhoef <vanhoefm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
2297f1c7 |
|
11-Oct-2013 |
Felix Fietkau <nbd@openwrt.org> |
ath9k: make ath9k_cmn_update_ichannel static Rework its wrapper function to make it more generic, using it as a replacement for previous calls to ath9k_cmn_update_ichannel. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
8896934c |
|
11-Oct-2013 |
Felix Fietkau <nbd@openwrt.org> |
ath9k_hw: remove direct accesses to channel mode flags Use wrappers where available. Simplifies code and helps with further improvements to the channel data structure Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
0671894f |
|
16-Aug-2013 |
Simon Wunderlich <simon.wunderlich@s2003.tu-chemnitz.de> |
ath9k: use chandef instead of channel_type To enable support for 5/10 MHz, some internal functions must be converted from using the (old) channel_type to chandef. This is a good chance to change all remaining occurences. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
68185a4b |
|
19-Jun-2013 |
Ben Greear <greearb@candelatech.com> |
ath9k_htc: Add ethtool stats support. This provides some of the same info found in the ath9k_htc debugfs through the standard ethtool stats API. This logic is only supported when ath9k_htc debugfs kernel feature is enabled, since that is the only time stats are actually gathered. Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
156652bb |
|
19-Jun-2013 |
Ben Greear <greearb@candelatech.com> |
ath9k_htc: Support reporting tx and rx chain mask. Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
075163bb |
|
20-Jun-2013 |
Sujith Manoharan <c_manoha@qca.qualcomm.com> |
ath9k_htc: Handle IDLE state transition properly Make sure that a chip reset is done when IDLE is turned off - this fixes authentication timeouts. Cc: stable@vger.kernel.org Reported-by: Ignacy Gawedzki <i@lri.fr> Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
a226c3d9 |
|
09-Jun-2013 |
Oleksij Rempel <linux@rempel-privat.de> |
ath9k_htc: add STBC TX support All known ar7010+ar* device and current FW support STBC TX. This patch make use of it and suggest to send STBC if peer support it. I use wort "suggest" since currenly we have separate rate controller in FW which will make decision based on rate and hardware. Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
e323300d |
|
02-Jun-2013 |
Sujith Manoharan <c_manoha@qca.qualcomm.com> |
ath9k: Simplify ANI initialization The check "enable_ani" is not required since it is always set to true and the logic for disabling/enabling ANI via debugfs is done at a higher layer. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
594e65b6 |
|
08-May-2013 |
Javier Cardona <javier@cozybit.com> |
ath9k_htc: Add support for mesh interfaces More specifically, enable AP-style beaconing on mesh ifaces and change the hw capabilities to reflect mesh support. Coexistence with a virtual STA interface was tested as working fine. Signed-off-by: Javier Cardona <javier@cozybit.com> [rebase, add iface combinations] Signed-off-by: Thomas Pedersen <thomas@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
c60c9929 |
|
07-Apr-2013 |
Felix Fietkau <nbd@openwrt.org> |
ath9k_common: remove ath9k_cmn_padpos It is equivalent to ieee80211_hdrlen Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
675a0b04 |
|
25-Mar-2013 |
Karl Beldan <karl.beldan@rivierawaves.com> |
mac80211: Use a cfg80211_chan_def in ieee80211_hw_conf_chan Drivers that don't use chanctxes cannot perform VHT association because they still use a "backward compatibility" pair of {ieee80211_channel, nl80211_channel_type} in ieee80211_conf and ieee80211_local. Signed-off-by: Karl Beldan <karl.beldan@rivierawaves.com> [fix kernel-doc] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
#
18b559d5 |
|
18-Jul-2012 |
Johannes Berg <johannes.berg@intel.com> |
mac80211: split TX aggregation stop action When TX aggregation is stopped, there are a few different cases: - connection with the peer was dropped - session stop was requested locally - session stop was requested by the peer - connection was dropped while a session is stopping The behaviour in these cases should be different, if the connection is dropped then the driver should drop all frames, otherwise the frames may continue to be transmitted, aggregated in the case of a locally requested session stop or unaggregated in the case of the peer requesting session stop. Split these different cases so that the driver can act accordingly; however, treat local and remote stop the same way and ask the driver to not send frames as aggregated packets any more. In the case of connection drop, the stop callback the driver is otherwise supposed to call is no longer required. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
#
bea843c7 |
|
21-Nov-2012 |
Sujith Manoharan <c_manoha@qca.qualcomm.com> |
ath9k/ath9k_htc: Remove WME macros Use the macros provided by mac80211 and remove redundant declarations inside the drivers. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
8b2c9824 |
|
06-Nov-2012 |
Johannes Berg <johannes.berg@intel.com> |
mac80211: clarify interface iteration and make it configurable During hardware restart, all interfaces are iterated even though they haven't been re-added to the driver, document this behaviour. The same also happens during resume, which is even more confusing since all of the interfaces were previously removed from the driver. Make this optional so drivers relying on the current behaviour can still use it, but to let drivers that don't want this behaviour disable it. Also convert all API users, keeping the old semantics except in hwsim, where the new normal ones are desired. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
#
96f99d3d |
|
08-Oct-2012 |
Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> |
ath9k_htc: Remove interface combination specific checks Once the driver advertizes interface combination logic based on its firmware/hardware limitation, cfg80211 takes care of all the necessary logic such as maximum beaconing vifs, standlone interface etc. Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
fed27f6f |
|
04-Sep-2012 |
Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> |
ath9k_htc: minor cleanup in ath9k_htc_add_station Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
e548c49e |
|
04-Sep-2012 |
Johannes Berg <johannes.berg@intel.com> |
mac80211: add key flag for management keys Mark keys that might be used to receive management frames so drivers can fall back on software crypto for them if they don't support hardware offload. As the new flag is only set correctly for RX keys and the existing IEEE80211_KEY_FLAG_SW_MGMT flag can only affect TX, also rename the latter to IEEE80211_KEY_FLAG_SW_MGMT_TX. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
#
69578029 |
|
12-Aug-2012 |
Antonio Quartulli <ordex@autistici.org> |
ath9k_htc: implement sta_rc_update() mac80211 callback In case of changes in the supported rates set for a given station, it is now possible to use this callback to update the current internal state of the station in the htc driver. Reported-by: Gui Iribarren <gui@altermundi.net> Signed-off-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
36323f81 |
|
23-Jul-2012 |
Thomas Huehn <thomas@net.t-labs.tu-berlin.de> |
mac80211: move TX station pointer and restructure TX Remove the control.sta pointer from ieee80211_tx_info to free up sufficient space in the TX skb control buffer for the upcoming Transmit Power Control (TPC). Instead, the pointer is now on the stack in a new control struct that is passed as a function parameter to the drivers' tx method. Signed-off-by: Thomas Huehn <thomas@net.t-labs.tu-berlin.de> Signed-off-by: Alina Friedrichsen <x-alina@gmx.net> Signed-off-by: Felix Fietkau <nbd@openwrt.org> [reworded commit message] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
#
60ca9f87 |
|
17-Jul-2012 |
Sujith Manoharan <c_manoha@qca.qualcomm.com> |
ath9k_hw: Cleanup ath9k_hw_set_tsfadjust Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
531bd079 |
|
15-Jul-2012 |
Felix Fietkau <nbd@openwrt.org> |
ath9k/ath9k_htc: fix txop limit handling In all those years apparently nobody noticed that the txop limit programmed into the chip was off by a factor of 32 (!), probably because the VI and VO queues aren't used that much aside from mgmt frames on VO. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
6bcfe67f |
|
25-Jun-2012 |
Sujith Manoharan <c_manoha@qca.qualcomm.com> |
ath9k_htc: Fix IDLE power save Remove the radio enable/disable stuff and fix the transition to FULL_SLEEP mode when the device is idle. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
d8a2c51c |
|
25-Jun-2012 |
Sujith Manoharan <c_manoha@qca.qualcomm.com> |
ath9k_htc: Use atomic operations for op_flags Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
931cb03a |
|
20-Jun-2012 |
Rajkumar Manoharan <rmanohar@qca.qualcomm.com> |
ath9k_htc: configure bssid on ASSOC/IBSS change After the change "mac80211: remove spurious BSSID change flag", BSS_CHANGED_BSSID will not be passed on association or IBSS status changes. So it could be better to program bssid on ASSOC or IBSS change notification. Not doing so, is affecting the packet transmission. Cc: stable@vger.kernel.org [3.4+] Reported-by: Michael Leun <lkml20120218@newton.leun.net> Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
8efa7a81 |
|
14-Mar-2012 |
Felix Fietkau <nbd@openwrt.org> |
ath9k_hw: remove ath9k_hw_htc_resetinit Automatically set the ah->htc_reset_init on init and after PHY disable. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
bf047fcd |
|
21-Feb-2012 |
Sujith Manoharan <c_manoha@qca.qualcomm.com> |
ath9k_htc: Start/stop btcoex using a helper Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
d7d312ca |
|
17-Jan-2012 |
Antonio Quartulli <ordex@autistici.org> |
ath9k_htc: claim support for IBSS RSN Skip group keys configuration in hardware in order to make IBSS RSN work. Keys will be managed using software. Signed-off-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
8a309305 |
|
17-Dec-2011 |
Felix Fietkau <nbd@openwrt.org> |
ath9k_hw: make bluetooth coexistence support optional at compile time Many systems (e.g. embedded systems) do not have wifi modules connected to bluetooth modules, so bluetooth coexistence is irrelevant there. With the addition of MCI support, ath9k picked up quite a bit of extra code that can be compiled out this way. This patch redefines ATH9K_HW_CAP_MCI and adds an inline wrapper for querying the bluetooth coexistence scheme, allowing the compiler to eliminate code that uses it, with only very little use of #ifdef. On MIPS this reduces the total size for the modules by about 20k. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
d2182b69 |
|
15-Dec-2011 |
Joe Perches <joe@perches.com> |
ath: Convert ath_dbg(bar, ATH_DBG_<FOO>, to ath_dbg(bar, FOO Add ATH_DBG_ to macros to shorten the uses and reduce the line count. Coalesce ath_dbg formats. Add missing spaces to coalesced formats. Add missing newline terminations to ath_dbg formats. Align ath_dbg arguments where appropriate. Standardize ath_dbg formats without periods. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
4279425c |
|
02-Dec-2011 |
Nikolay Martynov <mar.kolya@gmail.com> |
ath9k: use config.enable_ani to check if ani should be performed Currently in ath9k code there is an attempt which is meant to disable ANI for ar9100 and ar9340. But it doesn't really achieve this. All it does is disable ANI init and setup (i.e. calls to ath9k_hw_ani_setup and ath9k_hw_ani_init). Since ath9k_hw_ani_setup is not called ah->config.ani_poll_interval is never initialized (i.e. it is always zero) and ath_ani_calibrate always executes ANI procedures (over uninitialized ANI parameters). Moreover, ath_ani_calibrate is being called each 1ms because common->ani.timer is set to zero interval because ah->config.ani_poll_interval==0 (and thus smallest value of all intervals). Normally it should not be called this often. This patch changes the code so config.enable_ani is used to check if ANI should be performed. config.enable_ani is initialized to true by default. This patch sets it to false for ar9100 and ar9340. Signed-off-by: Nikolay Martynov <mar.kolya@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
8a3a3c85 |
|
02-Oct-2011 |
Eliad Peller <eliad@wizery.com> |
mac80211: pass vif param to conf_tx() callback tx params should be configured per interface. add ieee80211_vif param to the conf_tx callback, and change all the drivers that use this callback. The following spatch was used: @rule1@ struct ieee80211_ops ops; identifier conf_tx_op; @@ ops.conf_tx = conf_tx_op; @rule2@ identifier rule1.conf_tx_op; identifier hw, queue, params; @@ conf_tx_op ( - struct ieee80211_hw *hw, + struct ieee80211_hw *hw, struct ieee80211_vif *vif, u16 queue, const struct ieee80211_tx_queue_params *params) {...} Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
37a41b4a |
|
21-Sep-2011 |
Eliad Peller <eliad@wizery.com> |
mac80211: add ieee80211_vif param to tsf functions TSF can be kept per vif. Add ieee80211_vif param to set/get/reset_tsf, and move the debugfs entries to the per-vif directory. Update all the drivers that implement these callbacks. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
82b2d334 |
|
02-Sep-2011 |
Felix Fietkau <nbd@openwrt.org> |
ath9k: eliminate common->{rx,tx}_chainmask we already have ah->{rx,tx}chainmask for the same purpose Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
1ba45b9e |
|
27-Aug-2011 |
Larry Finger <Larry.Finger@lwfinger.net> |
ath9k: Fix a smatch warnings Smatch shows the following warnings: CHECK drivers/net/wireless/ath/ath9k/htc_drv_main.c drivers/net/wireless/ath/ath9k/htc_drv_main.c +1315 ath9k_htc_configure_filter(27) warn: inconsistent returns mutex:&priv->mutex: locked (1303) unlocked (1315) CHECK drivers/net/wireless/ath/ath9k/ar9003_eeprom.c drivers/net/wireless/ath/ath9k/ar9003_eeprom.c +3321 ar9300_eeprom_restore_internal(20) warn: returning -1 instead of -ENOMEM is sloppy Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
5fa71984 |
|
24-Aug-2011 |
Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> |
ath9k_htc: Add get_stats call back currently this call back is used only in debugfs of mac80211 Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
565dfefb |
|
07-Jul-2011 |
Rajkumar Manoharan <rmanohar@qca.qualcomm.com> |
ath9k_htc: do not configure filter before driver is started Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
5b68138e |
|
17-May-2011 |
Sujith Manoharan <Sujith.Manoharan@atheros.com> |
ath9k: Drag the driver to the year 2011 The Times They Are a-Changin'. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
bd548799 |
|
16-May-2011 |
Sujith Manoharan <Sujith.Manoharan@atheros.com> |
ath9k_htc: Fix max subframe handling Commit "ath9k_htc: Fix AMPDU subframe handling" registered the maximum subframe limit of the driver with mac80211, which was used in ADDBA negotiation. While technically correct, this causes inter-operability issues with a few APs. Revert to the older behavior to fix this. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
0cd075d7 |
|
16-May-2011 |
Sujith Manoharan <Sujith.Manoharan@atheros.com> |
ath9k_htc: Fix BSSID calculation The BSSID/AID has to be set for the first associated station interface. Subsequent interfaces may move out of assoc/disassoc status, in which case, the BSSID has to be re-calculated from the available interfaces. Also, ANI should be enabled or disabled based on the current opmode. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
db32124a |
|
16-May-2011 |
Sujith Manoharan <Sujith.Manoharan@atheros.com> |
ath9k_htc: Recalculate the BSSID mask on interface Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
84dfa730 |
|
16-May-2011 |
Sujith Manoharan <Sujith.Manoharan@atheros.com> |
ath9k_htc: Fix station flags The FW does absolutely nothing with the station flags, so remove them. But keep the field around since it might come in handy in the future. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
c75197a7 |
|
16-May-2011 |
Sujith Manoharan <Sujith.Manoharan@atheros.com> |
ath9k_htc: Fix mode selection Remove all the unsupported modes like FH, TURBO etc. Since this requires a FW update, increase the fw version to 1.3 Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
d244f21e |
|
28-Apr-2011 |
Sujith Manoharan <Sujith.Manoharan@atheros.com> |
ath9k_htc: Revamp LED management Remove all the convoluted hacks in the driver and simplify things by making use of mac80211's LED triggers. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
e2186b7c |
|
27-Apr-2011 |
Sujith Manoharan <Sujith.Manoharan@atheros.com> |
ath9k_htc: Add set_bitrate_mask() callback This callback is used to set the minimum rate for management frames. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
c58ca5b5 |
|
19-Apr-2011 |
Sujith Manoharan <Sujith.Manoharan@atheros.com> |
ath9k_htc: Use power save wrappers when accessing HW Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
f0dd4980 |
|
19-Apr-2011 |
Sujith Manoharan <Sujith.Manoharan@atheros.com> |
ath9k_htc: Fix max A-MPDU size handling Set the maximum ampdu size of a station correctly in the target by using the ampdu_factor. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
3a0593ef |
|
20-Apr-2011 |
Sujith Manoharan <Sujith.Manoharan@atheros.com> |
ath9k_htc: Fix AMPDU subframe handling * Register the driver's maximum ampdu subframe limit to mac80211. * Cleanup the target capabilities structure and fix an endian issue. * Fix BTCOEX by sending a command to the target when the BT priority changes. * Bump the required firmware version to 1.1 Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
0ff2b5c0 |
|
19-Apr-2011 |
Sujith Manoharan <Sujith.Manoharan@atheros.com> |
ath9k: Fix warnings from -Wunused-but-set-variable Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
859c3ca1 |
|
12-Apr-2011 |
Sujith Manoharan <Sujith.Manoharan@atheros.com> |
ath9k_htc: Add a timer to cleanup WMI events Occasionally, a WMI event would arrive ahead of the TX URB completion handler. Discarding these events would exhaust the available TX slots, so handle them by running a timer cleaning up such events. Also, timeout packets for which TX completion events have not arrived. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
84c9e164 |
|
12-Apr-2011 |
Sujith Manoharan <Sujith.Manoharan@atheros.com> |
ath9k_htc: Drain packets on station removal When a station entry is removed, there could still be pending packets destined for that station in the HIF layer. Sending these to the target is not necessary, so drain them in the driver itself. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
b587fc81 |
|
12-Apr-2011 |
Sujith Manoharan <Sujith.Manoharan@atheros.com> |
ath9k_htc: Drain pending TX frames properly When doing a channel set or a reset operation the pending frames queued up for transmission have to be flushed and sent to mac80211. Fixing this has to be done in two separate steps: * Flush queued frames and kill the URB TX completion handler. * Complete all the frames that in the TX pending queue. This patch adds proper support for draining and all the callsites namely, channel change/reset/idle/stop are fixed. A separate queue is used for handling failed frames. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
2c5d57f0 |
|
12-Apr-2011 |
Sujith Manoharan <Sujith.Manoharan@atheros.com> |
ath9k_htc: Add TX slots Maintain a bitmap of slots for transmission and update the cookie field for every packet with the slot value. This value would be used for matching packets when TX completion processing is added. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
8e86a547 |
|
12-Apr-2011 |
Sujith Manoharan <Sujith.Manoharan@atheros.com> |
ath9k_htc: Fix TX queue management Handle queue start/stop properly by maintaining a counter to check if the pending frame count has exceeded the threshold. Otherwise, packets would be dropped needlessly. While at it, use a simple flag to track queue status and use helper functions too. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
658ef04f |
|
12-Apr-2011 |
Sujith Manoharan <Sujith.Manoharan@atheros.com> |
ath9k_htc: Move TX specific stuff to a separate structure Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
e4c62506 |
|
12-Apr-2011 |
Sujith Manoharan <Sujith.Manoharan@atheros.com> |
ath9k_htc: Sync struct ath9k_htc_target_vif with FW Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
b97c57ff |
|
12-Apr-2011 |
Sujith Manoharan <Sujith.Manoharan@atheros.com> |
ath9k_htc: Sync struct ath9k_htc_target_sta with FW Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
8e42e4ba |
|
12-Apr-2011 |
Sujith Manoharan <Sujith.Manoharan@atheros.com> |
ath9k_htc: Move debug code to a separate file Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
f4c88991 |
|
12-Apr-2011 |
Sujith Manoharan <Sujith.Manoharan@atheros.com> |
ath9k_htc: Queue WMI events Use a queue to handle WMI events and schedule a tasklet to process the events. This fixes the race between the WMI event ISR and the SWBA tasklet when the arrival of WMI events in quick succession could overwrite the SWBA data before the tasklet from a previous iteration could have been scheduled. Also, drain the WMI queue properly. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
7d547eb4 |
|
12-Apr-2011 |
Sujith Manoharan <Sujith.Manoharan@atheros.com> |
ath9k_htc: Handle buffered frames in AP mode Use the CAB endpoint to send buffered multicast or broadcast frames after each SWBA event. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
9b674a02 |
|
12-Apr-2011 |
Sujith Manoharan <Sujith.Manoharan@atheros.com> |
ath9k_htc: Add TSF adjust capability In multi-interface mode, beacons/probe responses that are sent out must have their timestamp field updated. Calculate the TSF adjustment value for each beaconing interface and set it in the frame properly. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
832f6a18 |
|
12-Apr-2011 |
Sujith Manoharan <Sujith.Manoharan@atheros.com> |
ath9k_htc: Add beacon slots Beacon transmission is now handled through a slot mechanism. This allows multiple beaconing interfaces to be be present. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
e7a2a4f5 |
|
26-Feb-2011 |
Sujith Manoharan <Sujith.Manoharan@atheros.com> |
ath9k_htc: Handle BSSID/AID for multiple interfaces The AID and BSSID should be set in the HW only for the first station interface or adhoc interface. Also, cancel the ANI timer in stop() for multi-STA scenario. And finally configure the HW beacon timers only for the first station interface. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
7bb45683 |
|
24-Feb-2011 |
Johannes Berg <johannes.berg@intel.com> |
mac80211: make tx() operation return void The return value of the tx operation is commonly misused by drivers, leading to errors. All drivers will drop frames if they fail to TX the frame, and they must also properly manage the queues (if they didn't, mac80211 would already warn). Removing the ability for drivers to return a BUSY value also allows significant cleanups of the TX TX handling code in mac80211. Note that this also fixes a bug in ath9k_htc, the old "return -1" there was wrong. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Tested-by: Sedat Dilek <sedat.dilek@googlemail.com> [ath5k] Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> [rt2x00] Acked-by: Larry Finger <Larry.Finger@lwfinger.net> [b43, rtl8187, rtlwifi] Acked-by: Luciano Coelho <coelho@ti.com> [wl12xx] Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
a5fae37d |
|
20-Feb-2011 |
Sujith Manoharan <Sujith.Manoharan@atheros.com> |
ath9k_htc: Configure beacon timers in AP mode Handle multi-interface situations by checking if AP interfaces are already present. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
a236254c |
|
20-Feb-2011 |
Sujith Manoharan <Sujith.Manoharan@atheros.com> |
ath9k_htc: Add ANI for AP mode The time granularity for the ANI task is different for AP and station mode. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
ffbe7c83 |
|
20-Feb-2011 |
Sujith Manoharan <Sujith.Manoharan@atheros.com> |
ath9k_htc: Calculate and set the HW opmode Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
da8d9d93 |
|
20-Feb-2011 |
Sujith Manoharan <Sujith.Manoharan@atheros.com> |
ath9k_htc: Allow AP interface to be created Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
0df8359a |
|
20-Feb-2011 |
Sujith Manoharan <Sujith.Manoharan@atheros.com> |
ath9k_htc: Maintain individual counters for interfaces This is required for allowing only one IBSS interface to be configured. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
87df8957 |
|
20-Feb-2011 |
Sujith Manoharan <Sujith.Manoharan@atheros.com> |
ath9k_htc: Protect ampdu_action with a mutex This is required when issuing commands to the firmware. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
585895cd |
|
20-Feb-2011 |
Sujith Manoharan <Sujith.Manoharan@atheros.com> |
ath9k_htc: Set the BSSID mask for multiple interfaces Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
7c277349 |
|
20-Feb-2011 |
Sujith Manoharan <Sujith.Manoharan@atheros.com> |
ath9k_htc: Remove OP_ASSOCIATED variable mac80211 stores the association state in ieee80211_bss_conf. Use this and remove the local state, which is incorrect anyway since it is stored globally and not on a per-VIF basis. Restarting ANI and reconfiguration of HW beacon timers when a scan run ends requires more work. This is handled by iterating over the active interfaces. Finally, remove the useless check for associated status in RX processing. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
9304c82d |
|
20-Feb-2011 |
Sujith Manoharan <Sujith.Manoharan@atheros.com> |
ath9k_htc: Remove OP_PROTECT_ENABLE CTS protection can be obtained from mac80211 directly. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
cf04e772 |
|
20-Feb-2011 |
Sujith Manoharan <Sujith.Manoharan@atheros.com> |
ath9k_htc: Remove OP_PREAMBLE_SHORT mac80211's BSS info can be used for this. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
ab77c70a |
|
20-Feb-2011 |
Sujith Manoharan <Sujith.Manoharan@atheros.com> |
ath9k_htc: Fix error handling in add_interface Addition of a station might fail - handle this error properly by removing the VAP on the target. Also, bail out immediately if the max. no of interfaces has been reached. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
1057b750 |
|
20-Feb-2011 |
Sujith Manoharan <Sujith.Manoharan@atheros.com> |
ath9k_htc: Unify target capability updating Update capabilites on the target once, when start() is called, there is no need for redundant updating on adding an interface. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
a97b478c |
|
20-Feb-2011 |
Sujith Manoharan <Sujith.Manoharan@atheros.com> |
ath9k_htc: Allow upto two simultaneous interfaces Multiple interfaces can be configured if a slot is free on the target. Monitor mode also requires a slot. The maximum number of stations that can be handled in the firmware is 8, manage the station slots accordingly. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
8354dd3e |
|
18-Feb-2011 |
Vivek Natarajan <vnatarajan@atheros.com> |
ath9k_htc: Fix a compilation warning. Initialize caldata to avoid compilation warning. CC [M] drivers/net/wireless/ath/ath9k/htc_drv_main.o drivers/net/wireless/ath/ath9k/htc_drv_main.c: In function ‘ath9k_htc_config’: drivers/net/wireless/ath/ath9k/htc_drv_main.c:172: warning: ‘caldata’ may be used uninitialized in this function drivers/net/wireless/ath/ath9k/htc_drv_main.c:172: note: ‘caldata’ was declared here Signed-off-by: Vivek Natarajan <vnatarajan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
b2a5c3df |
|
31-Jan-2011 |
Rajkumar Manoharan <rmanoharan@atheros.com> |
ath9k_htc: make use common of function to update txpower Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
45655baa |
|
31-Jan-2011 |
Rajkumar Manoharan <rmanoharan@atheros.com> |
ath9k_htc: cancel ani work in ath9k_htc_stop ani work is cancelled in dissaoctiation. But in some cases during suspend, deauthention never be called. So we failed to stop ani work which was identified by the following warning. Call Trace: [<ffffffffa0454a1d>] ieee80211_can_queue_work.clone.17+0x2d/0x40 [mac80211] [<ffffffffa0454a60>] ieee80211_queue_delayed_work+0x30/0x60 [mac80211] [<ffffffffa0567f82>] ath9k_ani_work+0x142/0x250 [ath9k_htc] [<ffffffff81073c70>] async_run_entry_fn+0x0/0x180 [<ffffffffa0567e40>] ath9k_ani_work+0x0/0x250 [ath9k_htc] Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
ea888357 |
|
25-Jan-2011 |
Stanislaw Gruszka <sgruszka@redhat.com> |
ath9k_htc: fix race conditions when stop device We do not kill any scheduled tasklets when stopping device, that may cause usage of resources after free. Disable interrupts, kill tasklets and then works in correct order. Cc: stable@kernel.org Tested-by: Sujith <m.sujith@gmail.com> Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
0b01f030 |
|
18-Jan-2011 |
Johannes Berg <johannes.berg@intel.com> |
mac80211: track receiver's aggregation reorder buffer size The aggregation code currently doesn't implement the buffer size negotiation. It will always request a max buffer size (which is fine, if a little pointless, as the mac80211 code doesn't know and might just use 0 instead), but if the peer requests a smaller size it isn't possible to honour this request. In order to fix this, look at the buffer size in the addBA response frame, keep track of it and pass it to the driver in the ampdu_action callback when called with the IEEE80211_AMPDU_TX_OPERATIONAL action. That way the driver can limit the number of subframes in aggregates appropriately. Note that this doesn't fix any drivers apart from the addition of the new argument -- they all need to be updated separately to use this variable! Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
4e3ae387 |
|
14-Jan-2011 |
Rajkumar Manoharan <rmanoharan@atheros.com> |
ath9k_htc: keep calibrated noise floor value for oper channel The ath9k_hw assumes that caldata is valid only for oper channel. But with ath9k_htc case, the caldata is passed for all channels on hw_reset though we are not doing calibration on that channel. So the oper channel's nf history got cleared to default due to mismatch in channel flags. This patch also saves some space. Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
55de80d6 |
|
04-Jan-2011 |
Sujith Manoharan <Sujith.Manoharan@atheros.com> |
ath9k_htc: Really fix packet injection The chainmask value along with other configuration has to be set on the target for packet injection. Fix this and also move the monitor interface addition before the channel set segment to ensure that the opmode is updated properly. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
cc721287 |
|
03-Jan-2011 |
Sujith Manoharan <Sujith.Manoharan@atheros.com> |
ath9k_htc: Fix packet injection To inject a packet in monitor mode, a dummy station has to be associated with the monitor interface in the target. Failing to do this would result in a firmware crash on the device. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
1e1f4ad2 |
|
28-Dec-2010 |
Sujith Manoharan <Sujith.Manoharan@atheros.com> |
ath9k_htc: Move LED/RFKILL code to htc_drv_gpio.c And add the copyright/license header. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
039a0721 |
|
28-Dec-2010 |
Sujith Manoharan <Sujith.Manoharan@atheros.com> |
ath9k_htc: Fix fast channel change When returning to the operating channel, a full HW reset has to be done instead of a fast channel change. Since sw_scan_complete() is called after the config() call for the home channel, we end up doing a FCC. Fix this issue by checking the OFFCHANNEL flag to determine FCC. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
73908674 |
|
28-Dec-2010 |
Sujith Manoharan <Sujith.Manoharan@atheros.com> |
ath9k_htc: Handle FATAL events The device has to be reset when a FATAL event is received. Not doing so would leave the card in a non-working state. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
66e35474 |
|
28-Dec-2010 |
Sujith Manoharan <Sujith.Manoharan@atheros.com> |
ath9k_htc: Move work cancellation outside of mutex There is no need to lock the various work cancellation calls. This will be helpful when handling FATAL events. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
64c6e50c |
|
14-Dec-2010 |
Sujith Manoharan <Sujith.Manoharan@atheros.com> |
ath9k_htc: Remove PCI specific configuration This is not required for USB devices. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
f933ebed |
|
30-Nov-2010 |
Sujith Manoharan <Sujith.Manoharan@atheros.com> |
ath9k_htc: Fix suspend/resume The HW has to be set to FULLSLEEP mode during suspend, when no interface has been brought up. Not doing this would break resume, as the chip won't be powered up at all. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
692d6b17 |
|
07-Dec-2010 |
Sujith Manoharan <Sujith.Manoharan@atheros.com> |
ath9k_htc: Add support for handling TX power configuration Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
226afe68 |
|
02-Dec-2010 |
Joe Perches <joe@perches.com> |
ath: Convert ath_print to ath_dbg Remove ath/debug.h and the includes of these files. Coalesce long formats. Correct a few misspellings and missing "\n"s from these logging messages. Remove unnecessary trailing space before a newline. Remove ARRAY_SIZE casts, use printf type %zu Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
3800276a |
|
02-Dec-2010 |
Joe Perches <joe@perches.com> |
ath: Convert ath_print(.., ATH_DBG_FATAL to ath_err So these errors are always emitted at KERN_ERR level. Remove ARRAY_SIZE casts, use printf type %zu Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
81fc2a33 |
|
26-Nov-2010 |
Rajkumar Manoharan <rmanoharan@atheros.com> |
Revert "ath9k_htc: Handle monitor mode properly for HTC devices" This reverts commit 446fad5a5b6be765c8ec39bfdbbc6c7aa63fbcbb. The change had broken the packet injection on monitoring mode. Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
446fad5a |
|
26-Oct-2010 |
Rajkumar Manoharan <rmanoharan@atheros.com> |
ath9k_htc: Handle monitor mode properly for HTC devices No need to inform about monitor interface changes to firmware. Set the HW mode to monitor type based on mac80211 indication flag is sufficient. Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
babcbc29 |
|
19-Oct-2010 |
Felix Fietkau <nbd@openwrt.org> |
ath9k: initialize per-channel tx power limits instead of hardcoding them Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
de40f316 |
|
19-Oct-2010 |
Felix Fietkau <nbd@openwrt.org> |
ath9k_hw: extend ath9k_hw_set_txpowerlimit to test channel txpower ath9k_hw_set_txpowerlimit gets an extra boolean parameter that - if set - causes the rate txpower table and the regulatory limit to be calculated and stored, without changing hardware registers. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
94a40c0c |
|
13-Oct-2010 |
Rajkumar Manoharan <rmanoharan@atheros.com> |
ath9k_htc: set probe request rx filter This patch enables to receive probe request frames on p2p client mode. Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
6038f373 |
|
15-Aug-2010 |
Arnd Bergmann <arnd@arndb.de> |
llseek: automatically add .llseek fop All file_operations should get a .llseek operation so we can make nonseekable_open the default for future file operations without a .llseek pointer. The three cases that we can automatically detect are no_llseek, seq_lseek and default_llseek. For cases where we can we can automatically prove that the file offset is always ignored, we use noop_llseek, which maintains the current behavior of not returning an error from a seek. New drivers should normally not use noop_llseek but instead use no_llseek and call nonseekable_open at open time. Existing drivers can be converted to do the same when the maintainer knows for certain that no user code relies on calling seek on the device file. The generated code is often incorrectly indented and right now contains comments that clarify for each added line why a specific variant was chosen. In the version that gets submitted upstream, the comments will be gone and I will manually fix the indentation, because there does not seem to be a way to do that using coccinelle. Some amount of new code is currently sitting in linux-next that should get the same modifications, which I will do at the end of the merge window. Many thanks to Julia Lawall for helping me learn to write a semantic patch that does all this. ===== begin semantic patch ===== // This adds an llseek= method to all file operations, // as a preparation for making no_llseek the default. // // The rules are // - use no_llseek explicitly if we do nonseekable_open // - use seq_lseek for sequential files // - use default_llseek if we know we access f_pos // - use noop_llseek if we know we don't access f_pos, // but we still want to allow users to call lseek // @ open1 exists @ identifier nested_open; @@ nested_open(...) { <+... nonseekable_open(...) ...+> } @ open exists@ identifier open_f; identifier i, f; identifier open1.nested_open; @@ int open_f(struct inode *i, struct file *f) { <+... ( nonseekable_open(...) | nested_open(...) ) ...+> } @ read disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ read_no_fpos disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { ... when != off } @ write @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ write_no_fpos @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { ... when != off } @ fops0 @ identifier fops; @@ struct file_operations fops = { ... }; @ has_llseek depends on fops0 @ identifier fops0.fops; identifier llseek_f; @@ struct file_operations fops = { ... .llseek = llseek_f, ... }; @ has_read depends on fops0 @ identifier fops0.fops; identifier read_f; @@ struct file_operations fops = { ... .read = read_f, ... }; @ has_write depends on fops0 @ identifier fops0.fops; identifier write_f; @@ struct file_operations fops = { ... .write = write_f, ... }; @ has_open depends on fops0 @ identifier fops0.fops; identifier open_f; @@ struct file_operations fops = { ... .open = open_f, ... }; // use no_llseek if we call nonseekable_open //////////////////////////////////////////// @ nonseekable1 depends on !has_llseek && has_open @ identifier fops0.fops; identifier nso ~= "nonseekable_open"; @@ struct file_operations fops = { ... .open = nso, ... +.llseek = no_llseek, /* nonseekable */ }; @ nonseekable2 depends on !has_llseek @ identifier fops0.fops; identifier open.open_f; @@ struct file_operations fops = { ... .open = open_f, ... +.llseek = no_llseek, /* open uses nonseekable */ }; // use seq_lseek for sequential files ///////////////////////////////////// @ seq depends on !has_llseek @ identifier fops0.fops; identifier sr ~= "seq_read"; @@ struct file_operations fops = { ... .read = sr, ... +.llseek = seq_lseek, /* we have seq_read */ }; // use default_llseek if there is a readdir /////////////////////////////////////////// @ fops1 depends on !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier readdir_e; @@ // any other fop is used that changes pos struct file_operations fops = { ... .readdir = readdir_e, ... +.llseek = default_llseek, /* readdir is present */ }; // use default_llseek if at least one of read/write touches f_pos ///////////////////////////////////////////////////////////////// @ fops2 depends on !fops1 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read.read_f; @@ // read fops use offset struct file_operations fops = { ... .read = read_f, ... +.llseek = default_llseek, /* read accesses f_pos */ }; @ fops3 depends on !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, ... + .llseek = default_llseek, /* write accesses f_pos */ }; // Use noop_llseek if neither read nor write accesses f_pos /////////////////////////////////////////////////////////// @ fops4 depends on !fops1 && !fops2 && !fops3 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; identifier write_no_fpos.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, .read = read_f, ... +.llseek = noop_llseek, /* read and write both use no f_pos */ }; @ depends on has_write && !has_read && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write_no_fpos.write_f; @@ struct file_operations fops = { ... .write = write_f, ... +.llseek = noop_llseek, /* write uses no f_pos */ }; @ depends on has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; @@ struct file_operations fops = { ... .read = read_f, ... +.llseek = noop_llseek, /* read uses no f_pos */ }; @ depends on !has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; @@ struct file_operations fops = { ... +.llseek = noop_llseek, /* no read or write fn */ }; ===== End semantic patch ===== Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Julia Lawall <julia@diku.dk> Cc: Christoph Hellwig <hch@infradead.org>
|
#
35ecfe03 |
|
29-Sep-2010 |
Felix Fietkau <nbd@openwrt.org> |
ath9k_htc: remove use of common->ani.noise_floor It is unused aside from a single redundant debug message Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
040e539e |
|
08-Sep-2010 |
Bruno Randolf <br1@einfach.org> |
ath9k: Use common ath key management functions Use key management functions which have been moved to ath/key.c and remove ath9k copies of these functions and other now unused definitions. Signed-off-by: Bruno Randolf <br1@einfach.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
7cf1f2dd |
|
02-Sep-2010 |
Rajkumar Manoharan <rmanoharan@atheros.com> |
ath9k_htc: Enable fastcc for HTC devices. By enabling fastcc, the scan time reduced to half. Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
fe67470d |
|
26-Aug-2010 |
Rajkumar Manoharan <rmanoharan@atheros.com> |
ath9k_htc: Enable ANI in associated state only While scanning, ANI is triggered unnecessarily where sta is in unassociated state. And cancelling ani work in ath9k_htc_stop is not required. Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
21cb9879 |
|
18-Aug-2010 |
Vivek Natarajan <vnatarajan@atheros.com> |
ath9k_htc: Add support for bluetooth coexistence. Signed-off-by: Vivek Natarajan <vnatarajan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
97359d12 |
|
10-Aug-2010 |
Johannes Berg <johannes.berg@intel.com> |
mac80211: use cipher suite selectors Currently, mac80211 translates the cfg80211 cipher suite selectors into ALG_* values. That isn't all too useful, and some drivers benefit from the distinction between WEP40 and WEP104 as well. Therefore, convert it all to use the cipher suite selectors. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
71ba186c |
|
12-Aug-2010 |
Vivek Natarajan <vnatarajan@atheros.com> |
ath9k_htc: Fix disconnect issue in HT40 mode. Some APs advertise that they may be HT40 capable in the capabilites but the current operating channel configuration may be only HT20. This causes disconnection as ath9k_htc sets WLAN_RC_40_FLAG despite the AP operating in HT20 mode. Hence set this flag only if the current channel configuration is HT40 enabled. Cc: stable@kernel.org Signed-off-by: Vivek Natarajan <vnatarajan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
20bd2a09 |
|
30-Jul-2010 |
Felix Fietkau <nbd@openwrt.org> |
ath9k_hw: clean up per-channel calibration data The noise floor history buffer is currently not kept per channel, which can lead to problems when changing channels from a clean channel to a noisy one. Also when switching from HT20 to HT40, the noise floor history buffer is full of measurements, but none of them contain data for the extension channel, which it needs quite a bit of time to recover from. This patch puts all the per-channel calibration data into a single data structure, and gives the the driver control over whether that is used per-channel or even not used for some channels. For ath9k_htc, I decided to keep this per-channel in order to avoid creating regressions. For ath9k, the data is kept only for the operating channel, which saves some space. ath9k_hw takes care of wiping old data when the operating channel or its channel flags change. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
9746010b |
|
22-Jul-2010 |
Dan Carpenter <error27@gmail.com> |
ath9k: snprintf() returns largish values The snprintf() function returns the number of characters that would have been written (not counting the NUL character on the end). It could potentially be larger than the size of the buffer. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
9edd9520 |
|
13-Jul-2010 |
Luis R. Rodriguez <lrodriguez@atheros.com> |
ath9k_htc: make ath9k_htc_tx_aggr_oper() static This fixes this sparse complaint: CHECK drivers/net/wireless/ath/ath9k/htc_drv_main.c drivers/net/wireless/ath/ath9k/htc_drv_main.c:441:5: warning: symbol 'ath9k_htc_tx_aggr_oper' was not declared. Should it be static? Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
57674308 |
|
12-Jul-2010 |
Joe Perches <joe@perches.com> |
drivers/net/wireless: Remove unnecessary casts of private_data Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
88c1f4f6 |
|
30-Jun-2010 |
Sujith <Sujith.Manoharan@atheros.com> |
ath9k_htc: Add LED support for AR7010 Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
d7ca2139 |
|
14-Jun-2010 |
Sujith <Sujith.Manoharan@atheros.com> |
ath9k_htc: Fix ampdu_action callback Now that ampdu_action() can sleep, remove all the driver hacks and just issue WMI commands to the target. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
3553727c |
|
12-Jun-2010 |
Felix Fietkau <nbd@openwrt.org> |
ath9k/ath9k_htc: remove redundand checks for dual-stream tx support mac80211 already masks the HT sta capabilities based on hardware support Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
9cc3271f |
|
12-Jun-2010 |
Felix Fietkau <nbd@openwrt.org> |
ath9k_hw: remove ATH9K_CAP_TXPOW replace calls that read this capability with accesses to ath9k_hw's regulatory data. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
e8c35a77 |
|
11-Jun-2010 |
Felix Fietkau <nbd@openwrt.org> |
ath9k_htc: use common WMM AC definitions instead of ath9k ones Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
5d22c89b |
|
10-Jun-2010 |
Johannes Berg <johannes.berg@intel.com> |
mac80211: remove non-irqsafe aggregation callbacks The non-irqsafe aggregation start/stop done callbacks are currently only used by ath9k_htc, and can cause callbacks into the driver again. This might lead to locking issues, which will only get worse as we modify locking. To avoid trouble, remove the non-irqsafe versions and change ath9k_htc to use those instead. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
ea46e644 |
|
02-Jun-2010 |
Sujith <Sujith.Manoharan@atheros.com> |
ath9k_htc: Setup 5GHz channels AR7010 is dual-band. Setup the channels and rateset for 5GHz band. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
29d9075e |
|
02-Jun-2010 |
Sujith <Sujith.Manoharan@atheros.com> |
ath9k_htc: Configure dual stream rates The rate information on the target has to be updated for 2-stream devices, along with the correct chainmask. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
abd984e6 |
|
18-May-2010 |
Sujith <Sujith.Manoharan@atheros.com> |
ath9k_htc: Use proper station add/remove callbacks sta_add/sta_remove are the callbacks that can sleep. Use them instead of sta_notify. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
764580f5 |
|
01-Jun-2010 |
Sujith <Sujith.Manoharan@atheros.com> |
ath9k_htc: Fix fair beacon distribution This patch fixes beacon distribution in IBSS mode by configuring the hardware beacon queue properly. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
21d5130b |
|
01-Jun-2010 |
Sujith <Sujith.Manoharan@atheros.com> |
ath9k_htc: Handle host RX disable The MIB counters used by ANI have to be disabled on the host because the FW doesn't do it on the target side. Also, flush the receive buffers before initializing RX on the target. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
e9201f09 |
|
01-Jun-2010 |
Sujith <Sujith.Manoharan@atheros.com> |
ath9k_htc: Handle monitor interface removal The monitor interface instance on the target has to be removed before setting it to FULLSLEEP. Handle this properly. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
23367769 |
|
01-Jun-2010 |
Sujith <Sujith.Manoharan@atheros.com> |
ath9k_htc: Fix locking for ps_idle ps_idle is protected by the htc_pm_lock mutex. Use it to protect the variable. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
3901737e |
|
01-Jun-2010 |
Sujith <Sujith.Manoharan@atheros.com> |
ath9k_htc: Remove useless cancel_work_sync There is no need to cancel the PS work when disassociation happens. The work handlers are cancelled in the stop() callback. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
4a34a8c1 |
|
01-Jun-2010 |
Sujith <Sujith.Manoharan@atheros.com> |
ath9k_htc: Fix bug in handling CONF_IDLE Disable the radio only when mac80211 indicates it, through the IEEE80211_CONF_CHANGE_IDLE flag. Not handling this properly will result in multiple calls to radio_disable() even though the radio is already idle. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
cb551df2 |
|
01-Jun-2010 |
Sujith <Sujith.Manoharan@atheros.com> |
ath9k_htc: Add PS wrappers The HW has to be awake when registers are accessed. Ensure this is so by using the PS wrappers at appropriate places. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
881ac6a5 |
|
01-Jun-2010 |
Sujith <Sujith.Manoharan@atheros.com> |
ath9k_htc: Revamp CONF_IDLE handling This patch revamps IDLE power save handling in the driver. Two separate functions (radio enable/disable) are introduced, because the semantics of radio handling is just not the same as the start()/stop() callbacks. For example, the HW must not be disabled, instead, the PHY has to be disabled in radio_disable(). Also, the HW has to be reset properly in radio enable/disable and certain registers have to be programmed only once, in the start() callback. The radio_enable() routine doesn't need the PS wrappers since we set the HW power mode to AWAKE anyway before calling it. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
b4dec5e8 |
|
16-May-2010 |
Sujith <Sujith.Manoharan@atheros.com> |
ath9k_htc: Enable SGI in HT20 for AR9271 Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
2c76ef89 |
|
16-May-2010 |
Sujith <Sujith.Manoharan@atheros.com> |
ath9k_htc: Update HT configuration properly Use BSS_CHANGED_HT to handle HT parameter changes. The rate information on the target has to be updated to handle changes in HT configuration. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
0d425a7d |
|
16-May-2010 |
Sujith <Sujith.Manoharan@atheros.com> |
ath9k_htc: Cleanup rate initialization This patch removes a large chunk of code dealing with rate management within the driver and simplifying things by removing the hacky method of calculating HT changes. A subsequent patch would fix this by just using BSS_CHANGED_HT from mac80211. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
2edb4583 |
|
13-May-2010 |
Sujith <Sujith.Manoharan@atheros.com> |
ath9k_htc: Add queue statistics to xmit debugfs file Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
05a30f9c |
|
11-May-2010 |
Sujith.Manoharan@atheros.com <Sujith.Manoharan@atheros.com> |
ath9k_htc: Lock sta_notify() callback Since ->sta_notify() can sleep, protect the callback with a mutex. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
0730d114 |
|
08-May-2010 |
Dan Carpenter <error27@gmail.com> |
ath9k/htc_drv_main: off by one error I changed "> ATH9K_HTC_MAX_TID" to ">= ATH9K_HTC_MAX_TID" to avoid a potential overflow. Signed-off-by: Dan Carpenter <error27@gmail.com> Acked-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
277a64d1 |
|
08-May-2010 |
Dan Carpenter <error27@gmail.com> |
ath9k/htc_drv_main: null dereference typo This is a stray null dereference. We initialize "ista" properly later on. Signed-off-by: Dan Carpenter <error27@gmail.com> Acked-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
2ff6575b |
|
07-May-2010 |
Sujith <Sujith.Manoharan@atheros.com> |
ath9k_htc: Handle IDLE LED properly Switch LED off/on when handling CONF_CHANGE_IDLE. Not doing this would leave the radio LED on even though the chip would be in full sleep mode. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
9c6dda4e |
|
06-May-2010 |
Sujith <Sujith.Manoharan@atheros.com> |
ath9k_htc: Fix beaconing in IBSS mode The current way of managing beaconing in ad-hoc mode has a subtle race - the beacon obtained from mac80211 is freed in the SWBA handler rather than the TX completion routine. But transmission of beacons goes through the normal SKB queue maintained in hif_usb, leading to a situation where __skb_dequeue() in the TX completion handler goes kaput. Fix this by simply getting a beacon from mac80211 for every SWBA and free it in its completion routine. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
8a8572a8 |
|
27-Apr-2010 |
Vivek Natarajan <vnatarajan@atheros.com> |
ath9k_htc: Handle CONF_IDLE during unassociated state to save power. Signed-off-by: Vivek Natarajan <vnatarajan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
5bf1e17a |
|
26-Apr-2010 |
Sujith <Sujith.Manoharan@atheros.com> |
ath9k_htc: Remove unnecessary powersave restore Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
7073daa6 |
|
22-Apr-2010 |
Sujith <Sujith.Manoharan@atheros.com> |
ath9k_htc: Cancel running timers before disabling HW Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
7f1f5a00 |
|
16-Apr-2010 |
Sujith <Sujith.Manoharan@atheros.com> |
ath9k_htc: Fix sparse endian warnings This patch fixes a bunch of endian issues that were exposed by sparse. It's a miracle that the driver worked at all till now. The Lord be praised. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
eac8e385 |
|
16-Apr-2010 |
Sujith <Sujith.Manoharan@atheros.com> |
ath9k_htc: Add dropped SKB count to debugfs Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
0daa3e3a |
|
16-Apr-2010 |
Sujith <Sujith.Manoharan@atheros.com> |
ath9k_htc: Remove GPIO set on unload There is no point in trying to set the LED pin when the module is being unloaded. The target would be reset anyway. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
fcb9392f |
|
16-Apr-2010 |
Sujith <Sujith.Manoharan@atheros.com> |
ath9k_htc: Cleanup beacon configuration This patch cleans up beacon configuration, removing a redundant interface type check and updating beacon interval in the correct place. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
1c3652a5 |
|
05-Apr-2010 |
Vivek Natarajan <vnatarajan@atheros.com> |
ath9k_htc: Configure the beacon timers once the scan is completed. Signed-off-by: Vivek Natarajan <vnatarajan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
bde748a4 |
|
05-Apr-2010 |
Vivek Natarajan <vnatarajan@atheros.com> |
ath9k_htc: Add support for power save. Signed-off-by: Vivek Natarajan <vnatarajan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
7757dfed |
|
29-Mar-2010 |
Sujith <Sujith.Manoharan@atheros.com> |
ath9k_htc: Handle TX queue overflow Stop/restart TX queues when the internal SKB queue is full. This helps handle TX better under heavy load. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
ef98c3cd |
|
29-Mar-2010 |
Sujith <Sujith.Manoharan@atheros.com> |
ath9k_htc: Fix bug in aggregation initiation Accessing the sta pointer in TX completion without approprate RCU protection is wrong. Fix this. Also, RCU protection is needed when the station's aggregation state is updated. Handle this properly. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
0995d110 |
|
29-Mar-2010 |
Sujith <Sujith.Manoharan@atheros.com> |
ath9k_common: Move RX filter code to ath9k_htc The calculation of RX filter is fairly different between ath9k and ath9k_htc, trying to make this common between the two drivers would result in code churn. While at it, remove the handling of PSPOLL filter, it can be added when(if) AP support is added to ath9k_htc. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
e1572c5e |
|
24-Mar-2010 |
Sujith <Sujith.Manoharan@atheros.com> |
ath9k_htc: Fix symbol collision with ath9k Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
#
fb9987d0 |
|
17-Mar-2010 |
Sujith <Sujith.Manoharan@atheros.com> |
ath9k_htc: Support for AR9271 chipset. Features: * Station mode * IBSS mode * Monitor mode * Legacy support * HT support * TX/RX 11n Aggregation * HW encryption * LED * Suspend/Resume For more information: http://wireless.kernel.org/en/users/Drivers/ath9k_htc Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: Senthil Balasubramanian <senthilkumar@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
|