#
0a7f04b4 |
|
25-Mar-2024 |
Thomas Zimmermann <tzimmermann@suse.de> |
drm/ast: Move DDC code to ast_ddc.{c,h} Rename ast_i2c.c to ast_ddc.c and move its interface into the new header ast_ddc.h. Update all include statements as necessary and change the adapter name to 'AST DDC bus'. This avoids including I2C headers in the driver's main header file, which doesn't need them. Renaming files to _ddc indicates that the code is about the DDC. I2C is really just the underlying bus here. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Sui Jingfeng <sui.jingfeng@linux.dev> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240325200855.21150-6-tzimmermann@suse.de
|
#
c0af492c |
|
25-Mar-2024 |
Thomas Zimmermann <tzimmermann@suse.de> |
drm/ast: Remove struct ast_{vga,sil165}_connector Both, struct ast_vga_connector and struct ast_sil164_connector, are now wrappers around struct drm_connector. Remove them. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240325200855.21150-4-tzimmermann@suse.de
|
#
d66cdb63 |
|
25-Mar-2024 |
Thomas Zimmermann <tzimmermann@suse.de> |
drm/ast: Fail probing if DDC channel could not be initialized Expect the hardware to provide a DDC channel. Fail probing if its initialization fails. Failing to initialize the DDC indicates a larger problem, so there's no point in continuing. v4: * give a rational in the commit message Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240325200855.21150-3-tzimmermann@suse.de
|
#
83dc1029 |
|
16-Nov-2023 |
Thomas Zimmermann <tzimmermann@suse.de> |
drm/ast: Move detection code into PCI probe helper Detect device type and config mode in the PCI probe helper, but leave DRM device initialization where it is. Structures the driver probe and setup code into a detection and an initialization phase. A later patch can add branching to the device-initialization code. Each chip type can have it own initializer function, if necessary. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231116100240.22975-11-tzimmermann@suse.de
|
#
9f3ebec8 |
|
16-Nov-2023 |
Thomas Zimmermann <tzimmermann@suse.de> |
drm/ast: Add enum ast_config_mode The config mode used to be a field in struct ast_device. Turn it into a named type. We'll need this for device detection. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231116100240.22975-9-tzimmermann@suse.de
|
#
83ab91fa |
|
16-Nov-2023 |
Thomas Zimmermann <tzimmermann@suse.de> |
drm/ast: Partially implement POST without ast device instance We'll have to do some of the GPU POSTing for detecting the ast device type. Make this work without an instance of the ast device. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231116100240.22975-8-tzimmermann@suse.de
|
#
cdac0cd4 |
|
16-Nov-2023 |
Thomas Zimmermann <tzimmermann@suse.de> |
drm/ast: Add I/O helpers without ast device Implement I/O access in helpers that do not use an ast device instance, but the raw pointer to the I/O memory. We'll later need these helpers to detect the device type before allocating the ast device instance. v3: * fix typo in commit message (Sui) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231116100240.22975-5-tzimmermann@suse.de
|
#
c350a08a |
|
16-Nov-2023 |
Thomas Zimmermann <tzimmermann@suse.de> |
drm/ast: Turn ioregs_lock to modeset_lock The lock for the I/O registers is only relevant during mode-setting operations. It protects the registers from concurrent access from reading EDID information. Reduce lock coverage to mode setting, rename the lock and move it entirely into the mode-setting code. No functional changes, as the I/O lock was never used for anything else than mode setting. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231116100240.22975-2-tzimmermann@suse.de
|
#
8d6ef265 |
|
16-Nov-2023 |
Thomas Zimmermann <tzimmermann@suse.de> |
drm/ast: Disconnect BMC if physical connector is connected Many user-space compositors fail with mode setting if a CRTC has more than one connected connector. This is the case with the BMC on Aspeed systems. Work around this problem by setting the BMC's connector status to disconnected when the physical connector has a display attached. This way compositors will only see one connected connector at a time; either the physical one or the BMC. Suggested-by: Jocelyn Falempe <jfalempe@redhat.com> Fixes: e329cb53b45d ("drm/ast: Add BMC virtual connector") Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Cc: <stable@vger.kernel.org> # v6.6+ Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231116130217.22931-1-tzimmermann@suse.de
|
#
6c73f1db |
|
17-Oct-2023 |
Thomas Zimmermann <tzimmermann@suse.de> |
drm/ast: Move register constants to ast_reg.h Improve readability by putting all register constants into a separate header file. No functional changes. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231017083653.10063-13-tzimmermann@suse.de
|
#
8811bcbf |
|
17-Oct-2023 |
Thomas Zimmermann <tzimmermann@suse.de> |
drm/ast: Rename AST_IO_MISC_PORT_READ to AST_IO_VGAMR_R Rename AST_IO_MISC_PORT_READ to AST_IO_VGAMR_R to align naming in the driver with documentation. No functional changes. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231017083653.10063-12-tzimmermann@suse.de
|
#
224bf236 |
|
17-Oct-2023 |
Thomas Zimmermann <tzimmermann@suse.de> |
drm/ast: Rename AST_IO_INPUT_STATUS1_READ to AST_IO_VGAIR1_R Rename AST_IO_INPUT_STATUS1_READ to AST_IO_VGAIR1_R to align naming in the driver with documentation. No functional changes. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231017083653.10063-11-tzimmermann@suse.de
|
#
c79479fa |
|
17-Oct-2023 |
Thomas Zimmermann <tzimmermann@suse.de> |
drm/ast: Rename AST_IO_CRTC_PORT to AST_IO_VGACRI Rename AST_IO_CRTC_PORT to AST_IO_VGACRI to align naming in the driver with documentation. No functional changes. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231017083653.10063-10-tzimmermann@suse.de
|
#
272bfa3a |
|
17-Oct-2023 |
Thomas Zimmermann <tzimmermann@suse.de> |
drm/ast: Rename AST_IO_GR_PORT to AST_IO_VGAGRI Rename AST_IO_GR_PORT to AST_IO_VGAGRI to align naming in the driver with documentation. No functional changes. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231017083653.10063-9-tzimmermann@suse.de
|
#
a075e168 |
|
17-Oct-2023 |
Thomas Zimmermann <tzimmermann@suse.de> |
drm/ast: Rename AST_IO_DAC_DATA to AST_IO_VGAPDR Rename AST_IO_DAC_DATA to AST_IO_VGAPDR to align naming in the driver with documentation. No functional changes. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231017083653.10063-8-tzimmermann@suse.de
|
#
7b0be4b9 |
|
17-Oct-2023 |
Thomas Zimmermann <tzimmermann@suse.de> |
drm/ast: Rename AST_IO_DAC_INDEX_WRITE to AST_IO_VGADWR Rename AST_IO_DAC_INDEX_WRITE to AST_IO_VGADWR to align naming in the driver with documentation. No functional changes. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231017083653.10063-7-tzimmermann@suse.de
|
#
9f662e1e |
|
17-Oct-2023 |
Thomas Zimmermann <tzimmermann@suse.de> |
drm/ast: Rename AST_IO_DAC_INDEX_READ to AST_IO_VGADRR Rename AST_IO_DAC_INDEX_READ to AST_IO_VGADRR to align naming in the driver with documentation. No functional changes. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231017083653.10063-6-tzimmermann@suse.de
|
#
2a5481e3 |
|
17-Oct-2023 |
Thomas Zimmermann <tzimmermann@suse.de> |
drm/ast: Rename AST_IO_SEQ_PORT to AST_IO_VGASRI Rename AST_IO_VGA_SEQ_PORT to AST_IO_VGASRI to align naming in the driver with documentation. No functional changes. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231017083653.10063-5-tzimmermann@suse.de
|
#
ba51b3ed |
|
17-Oct-2023 |
Thomas Zimmermann <tzimmermann@suse.de> |
drm/ast: Rename AST_IO_VGA_ENABLE_PORT to AST_IO_VGAER Rename AST_IO_VGA_ENABLE_PORT to AST_IO_VGAER to align naming in the driver with documentation. No functional changes. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231017083653.10063-4-tzimmermann@suse.de
|
#
b3945edd |
|
17-Oct-2023 |
Thomas Zimmermann <tzimmermann@suse.de> |
drm/ast: Rename AST_IO_MISC_PORT_WRITE to AST_IO_VGAMR_W Rename AST_IO_MISC_PORT_WRITE to AST_IO_VGAMR_W to align naming in the driver with documentation. No functional changes. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231017083653.10063-3-tzimmermann@suse.de
|
#
53f410d3 |
|
17-Oct-2023 |
Thomas Zimmermann <tzimmermann@suse.de> |
drm/ast: Rename AST_IO_AR_PORT_WRITE to AST_IO_VGAARI_W Rename AST_IO_AR_PORT_WRITE to AST_IO_VGAARI_W to align naming in the driver with documentation. No functional changes. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231017083653.10063-2-tzimmermann@suse.de
|
#
f81bb0ac |
|
13-Jul-2023 |
Jocelyn Falempe <jfalempe@redhat.com> |
drm/ast: report connection status on Display Port. Aspeed always report the display port as "connected", because it doesn't set a .detect_ctx callback. Fix this by providing the proper detect callback for astdp and dp501. This also fixes the following regression: Since commit fae7d186403e ("drm/probe-helper: Default to 640x480 if no EDID on DP") The default resolution is now 640x480 when no monitor is connected. But Aspeed graphics is mostly used in servers, where no monitor is attached. This also affects the remote BMC resolution to 640x480, which is inconvenient, and breaks the anaconda installer. v2: Add .detect callback to the dp/dp501 connector (Jani Nikula) v3: Use .detect_ctx callback, and refactors (Thomas Zimmermann) Add a BMC virtual connector v4: Better indent detect_ctx() functions (Thomas Zimmermann) v5: Enable polling of the dp and dp501 connector status (Thomas Zimmermann) v6: Change check order in ast_astdp_is_connected (Jammy Huang) Fixes: fae7d186403e ("drm/probe-helper: Default to 640x480 if no EDID on DP") Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20230713134316.332502-2-jfalempe@redhat.com
|
#
e329cb53 |
|
13-Jul-2023 |
Jocelyn Falempe <jfalempe@redhat.com> |
drm/ast: Add BMC virtual connector Most aspeed devices have a BMC, which allows to remotely see the screen. Also in the common use case, those servers don't have a display connected. So add a Virtual connector, to reflect that even if no display is connected, the framebuffer can still be seen remotely. This prepares the work to implement a detect_ctx() for the Display port connector. v4: call drm_add_modes_noedid() with 4096x4096 (Thomas Zimmermann) remove useless struct field init to 0 (Thomas Zimmermann) don't use drm_simple_encoder_init() (Thomas Zimmermann) inline ast_bmc_connector_init() (Thomas Zimmermann) Fixes: fae7d186403e ("drm/probe-helper: Default to 640x480 if no EDID on DP") Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20230713134316.332502-1-jfalempe@redhat.com
|
#
52c29330 |
|
21-Jun-2023 |
Thomas Zimmermann <tzimmermann@suse.de> |
drm/ast: Detect AST 2510 model Detect the 6th-generation AST 2510. Allows to simplify the code for widescreen support. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Tested-by: Jocelyn Falempe <jfalempe@redhat.com> # AST2600 Link: https://patchwork.freedesktop.org/patch/msgid/20230621130032.3568-13-tzimmermann@suse.de
|
#
86d86d1b |
|
21-Jun-2023 |
Thomas Zimmermann <tzimmermann@suse.de> |
drm/ast: Detect AST 1400 model Detect the 5th-generation AST 1400. Allows to simplify the code for widescreen support. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Tested-by: Jocelyn Falempe <jfalempe@redhat.com> # AST2600 Link: https://patchwork.freedesktop.org/patch/msgid/20230621130032.3568-12-tzimmermann@suse.de
|
#
6bd576da |
|
21-Jun-2023 |
Thomas Zimmermann <tzimmermann@suse.de> |
drm/ast: Detect AST 1300 model Detect the 4th-generation AST 1300. Allows to simplify the code for widescreen support. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Tested-by: Jocelyn Falempe <jfalempe@redhat.com> # AST2600 Link: https://patchwork.freedesktop.org/patch/msgid/20230621130032.3568-11-tzimmermann@suse.de
|
#
ecf64579 |
|
21-Jun-2023 |
Thomas Zimmermann <tzimmermann@suse.de> |
drm/ast: Distinguish among chip generations ASpeed distinguishes among various generations of the AST graphics chipset with various models. [1] The most-recent model AST 2600 is of the 7th generation, the AST 2500 is of the 6th generation, and so on. The ast driver simply picks one of the models as representative for the whole generation. In several places, individual models of the same generation need to be handled differently, which then requires additional code for detecting the model. Introduce different generations of the Aspeed chipset. In the source code, refer to the generation instead of the representation model where possible. The few places that require per-model handling are now clearly marked. In the enum ast_chip, we arrange each model's value such that it encodes the generation. This allows for an easy test. The actual values are ordered, but not of interest to the driver. v2: * use __ast_gen_is_eq() (Jingfeng) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://web.archive.org/web/20141007093258/http://www.aspeedtech.com/products.php?fPath=20 # 1 Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Tested-by: Jocelyn Falempe <jfalempe@redhat.com> # AST2600 Reviewed-by: Sui Jingfeng <suijingfeng@loongson.cn> Link: https://patchwork.freedesktop.org/patch/msgid/20230621130032.3568-10-tzimmermann@suse.de
|
#
5b71707d |
|
21-Jun-2023 |
Thomas Zimmermann <tzimmermann@suse.de> |
drm/ast: Enable and unlock device access early during init POST and memory management contains code to enable access to the device's memory spaces. This is too late. Consolidate this code at the beginning of the device initialization. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Tested-by: Jocelyn Falempe <jfalempe@redhat.com> # AST2600 Link: https://patchwork.freedesktop.org/patch/msgid/20230621130032.3568-8-tzimmermann@suse.de
|
#
48b6701e |
|
21-Jun-2023 |
Thomas Zimmermann <tzimmermann@suse.de> |
drm/ast: Set PCI config before accessing I/O registers Access to I/O registers is required to detect and set up the device. Enable the rsp PCI config bits before. While at it, convert the magic number to macro constants. Enabling the PCI config bits was done after trying to detect the device. It was probably too late at this point. v2: * use standard 16-bit PCI r/w access (Jingfeng) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Tested-by: Jocelyn Falempe <jfalempe@redhat.com> # AST2600 Reviewed-by: Sui Jingfeng <suijingfeng@loongson.cn> Link: https://patchwork.freedesktop.org/patch/msgid/20230621130032.3568-7-tzimmermann@suse.de
|
#
1da14d57 |
|
21-Jun-2023 |
Thomas Zimmermann <tzimmermann@suse.de> |
drm/ast: Implement register helpers in ast_drv.h There are already a number of register I/O functions in ast_drv.h. For consistency, move the remaining functions there as well. No functional changes. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Sui Jingfeng <suijingfeng@loongson.cn> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Tested-by: Jocelyn Falempe <jfalempe@redhat.com> # AST2600 Link: https://patchwork.freedesktop.org/patch/msgid/20230621130032.3568-4-tzimmermann@suse.de
|
#
30fe33f2 |
|
21-Jun-2023 |
Thomas Zimmermann <tzimmermann@suse.de> |
drm/ast: Remove vga2_clone field Remove the unused field vga2_clone from struct ast_device. No functional changes. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Sui Jingfeng <suijingfeng@loongson.cn> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Tested-by: Jocelyn Falempe <jfalempe@redhat.com> # AST2600 Link: https://patchwork.freedesktop.org/patch/msgid/20230621130032.3568-3-tzimmermann@suse.de
|
#
bed61c8f |
|
29-May-2023 |
Jammy Huang <jammy_huang@aspeedtech.com> |
drm/ast: Fix long time waiting on s3/s4 resume In resume, DP's launch function, ast_dp_launch, could wait at most 30 seconds before timeout to check if DP is enabled. It could lead to 'DPM device timeout' and trigger unrecoverable kernel panic. To avoid this problem, we check if DP enable or not at driver probe only. Reported-and-tested-by: Wendy Wang <wendy.wang@intel.com> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217278 Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Jammy Huang <jammy_huang@aspeedtech.com> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20230530041240.13427-1-jammy_huang@aspeedtech.com
|
#
5abaa683 |
|
21-Feb-2023 |
Thomas Zimmermann <tzimmermann@suse.de> |
drm/ast: Rename to_ast_private() to to_ast_device() The helper to_ast_private() now upcasts to struct ast_device. Rename it accordingly. No functional changes. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230221155745.27484-5-tzimmermann@suse.de
|
#
37b42cf9 |
|
21-Feb-2023 |
Thomas Zimmermann <tzimmermann@suse.de> |
drm/ast: Rename struct ast_private to struct ast_device The data structure struct ast_private represents an AST device. Its name comes from the time when it was allocated and stored separately in struct drm_device.dev_private. The DRM device is now embedded, so rename struct ast_private to struct ast_device. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230221155745.27484-4-tzimmermann@suse.de
|
#
faf67f64 |
|
21-Feb-2023 |
Thomas Zimmermann <tzimmermann@suse.de> |
drm/ast: Rework definition of I/O read and write helpers Ast defines a number of I/O helpers for accessing hardware. Only 4 of the many generated functions are actually used. Replace the respective generator macros with those 4 functions. No functional changes. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230221155745.27484-3-tzimmermann@suse.de
|
#
a3841086 |
|
21-Feb-2023 |
Thomas Zimmermann <tzimmermann@suse.de> |
drm/ast: Remove little-endianism from I/O helpers Replace one call to ast_io_write16() with two calls to ast_io_write8() in ast_set_index_reg(). The combined 16-bit-wide write of an index register and the corresponding data register only works on little- endian systems. Write both registers independent from each other. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230221155745.27484-2-tzimmermann@suse.de
|
#
45b64fd9 |
|
03-Nov-2022 |
Thomas Zimmermann <tzimmermann@suse.de> |
drm/fb-helper: Remove unnecessary include statements Remove include statements for <drm/drm_fb_helper.h> where it is not required (i.e., most of them). In a few places include other header files that are required by the source code. v3: * fix amdgpu include statements * fix rockchip include statements Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221103151446.2638-23-tzimmermann@suse.de
|
#
f2fa5a99 |
|
13-Oct-2022 |
Thomas Zimmermann <tzimmermann@suse.de> |
drm/ast: Convert ast to SHMEM Replace GEM VRAM helpers with GEM SHMEM helpers in ast. Avoids OOM errors when allocating video memory. Also adds support for dma-buf functionality. Aspeed display hardware supports display resolutions of FullHD and higher at 32-bit pixel depth. But the amount of video memory is in the range of 8 MiB to 32 MiB, which adds constraints to the actually available resolutions. As atomic modesetting with VRAM helpers requires double buffering in video memory, ast fails to pageflip in some configurations. For example, FullHD with an active cursor plane does not work on devices with 16 MiB of video memory. Resolve this problem by converting the ast driver to GEM SHMEM helpers. Keep the buffer objects in system memory and copy to video memory on pageflips via shadow-plane helpers. Userspace used to require shadow planes for decent performance, but that's now provided by the driver. To replace the memory management, the patch also implements damage handling for the primary plane. With GEM SHMEM helpers, dma-buf import and export is now supported by ast. This allows easier screen mirroring across devices or with an Aspeed-based BMC. A corresponding feature request is available at [1]. v2: * fix typos in commit message (Jocelyn) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Tested-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://lore.kernel.org/dri-devel/20220901124451.2523077-1-oushixiong@kylinos.cn/ # [1] Link: https://patchwork.freedesktop.org/patch/msgid/20221013112923.769-8-tzimmermann@suse.de
|
#
537a1db9 |
|
13-Oct-2022 |
Thomas Zimmermann <tzimmermann@suse.de> |
drm/ast: Rename struct ast_cursor_plane to struct ast_plane Rename the plane structure struct ast_cursor_plane to struct ast_plane as it will be used for the primary plane as well. No functional changes. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Tested-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221013112923.769-6-tzimmermann@suse.de
|
#
aa7c8865 |
|
13-Oct-2022 |
Thomas Zimmermann <tzimmermann@suse.de> |
drm/ast: Remove cursor double buffering Update the cursor image via damage handling in-place. The cursor's double buffering has no visible effect on the output, so remove it. Done in preparation of switching ast to GEM SHMEM helpers. Removing double buffering will allow us to use the same data structure for primary and cursor plane. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Tested-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221013112923.769-5-tzimmermann@suse.de
|
#
232b95ba |
|
23-Jun-2022 |
KuoHsiang Chou <kuohsiang_chou@aspeedtech.com> |
drm/ast: Fixed the casting issue reported by sparse V1: 1.Fixed sparse:cast truncates bits form constant value ()cast truncates bits from constant value (ffffffffffffff00 becomes 0) Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: KuoHsiang Chou <kuohsiang_chou@aspeedtech.com> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20220623083116.35365-1-kuohsiang_chou@aspeedtech.com
|
#
7f35680a |
|
07-Jun-2022 |
Thomas Zimmermann <tzimmermann@suse.de> |
drm/ast: Support multiple outputs Systems with AST graphics can have multiple output; typically VGA plus some other port. Record detected output chips in a bitmask and initialize each output on its own. Assume a VGA output by default and use SIL164 and DP501 if available. For ASTDP assume that it can run in parallel with VGA. Tested on AST2100. v3: * define a macro for each BIT(ast_tx_chip) (Patrik) v2: * make VGA/SIL164/DP501 mutually exclusive Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Fixes: a59b026419f3 ("drm/ast: Initialize encoder and connector for VGA in helper function") Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Javier Martinez Canillas <javierm@redhat.com> Cc: Dave Airlie <airlied@redhat.com> Cc: dri-devel@lists.freedesktop.org Link: https://patchwork.freedesktop.org/patch/msgid/20220607092008.22123-2-tzimmermann@suse.de
|
#
477277c7 |
|
07-Jun-2022 |
Thomas Zimmermann <tzimmermann@suse.de> |
drm/ast: Support multiple outputs Systems with AST graphics can have multiple output; typically VGA plus some other port. Record detected output chips in a bitmask and initialize each output on its own. Assume a VGA output by default and use SIL164 and DP501 if available. For ASTDP assume that it can run in parallel with VGA. Tested on AST2100. v3: * define a macro for each BIT(ast_tx_chip) (Patrik) v2: * make VGA/SIL164/DP501 mutually exclusive Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Fixes: a59b026419f3 ("drm/ast: Initialize encoder and connector for VGA in helper function") Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Javier Martinez Canillas <javierm@redhat.com> Cc: Dave Airlie <airlied@redhat.com> Cc: dri-devel@lists.freedesktop.org Link: https://patchwork.freedesktop.org/patch/msgid/20220607092008.22123-2-tzimmermann@suse.de (cherry picked from commit 7f35680ada234ce00828b8ea841ba7ca1e00ff52) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
|
#
f870231f |
|
02-May-2022 |
Thomas Zimmermann <tzimmermann@suse.de> |
drm/ast: Protect concurrent access to I/O registers with lock Add a mutex lock to protect concurrent access to I/O registers against each other. This happens between invocation of commit- tail functions and get-mode operations. Both with use the CRTC index register AST_IO_CRTC_PORT. Concurrent access can lead to failed mode-setting operations. v2: * fix typo in commit description (Jocelyn) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reported-by: KuoHsiang Chou <kuohsiang_chou@aspeedtech.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220502142514.2174-3-tzimmermann@suse.de
|
#
594e9c04 |
|
28-Apr-2022 |
KuoHsiang Chou <kuohsiang_chou@aspeedtech.com> |
drm/ast: Create the driver for ASPEED proprietory Display-Port V1: 1. The MCU FW controling ASPEED DP is loaded by BMC boot loader. 2. Driver starts after CR[3:1] == 111b that indicates Tx is ASTDP, and CRD1[5] has been asserted by BMVC boot loader. 3. EDID is prioritized by DP monitor. 4. DP's EDID has high priority to decide resolution supporting. V2: Modules description: 1. ASTDP (ASPEED DisplayPort) is controlled by dedicated AST-MCU (ASPEED propriatary MCU). 2. MCU is looping in charged of HPD, Read EDID, Link Training with DP sink. 3. ASTDP and AST-MUC reside in BMC (Baseboard Management controller) addressing-space. 4. ASPEED DRM driver requests MCU to get HPD and EDID by CR-scratched register. Booting sequence: 1. Check if TX is ASTDP // ast_dp_launch() 2. Check if DP-MCU FW has loaded // ast_dp_launch() 3. Read EDID // ast_dp_read_edid() 4. Resolution switch // ast_dp_SetOutput() V3: 1. Remove unneeded semicolon. 2. Apply to git://anongit.freedesktop.org/drm/drm, instead of git://anongit.freedesktop.org/drm/drm-misc 3. Resolve auto build test WARNINGs on V1 patch. V4: 1. Sync code-base with kernel 5.17_rc6 2. Remove the define of DPControlPower, because DP chips need to be powered on to be used. 3. Remove the switches of PHY and Display from EDID procedure. 4. Revise increaing delay to fixed delay, because this version kernel doesn't detect minitor consistenntly. 5. Create clean-up code used for reset of power state on errors with -EIO manner. 6. Revise the DP detection by TX type and its DP-FW status during booting and resume. 7. Correct the CamelCase Style. 8. Use register reading while needing, and remove to hold full register. 9. Instead of 'u8', revise to 'bool' on swwitch of PHY and video. 10.Correct typo 11.Remove the duplicated copy of TX definition. 12.Use EDID_LENGTH as the constant of 128. Signed-off-by: KuoHsiang Chou <kuohsiang_chou@aspeedtech.com> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20220428075603.20904-1-kuohsiang_chou@aspeedtech.com
|
#
5e78d59a |
|
07-Feb-2022 |
Thomas Zimmermann <tzimmermann@suse.de> |
drm/ast: Move SIL164-based connector code into separate helpers Add helpers for initializing SIL164-based connectors. These used to be handled by the VGA connector code. But SIL164 provides output via DVI-I, so set the encoder and connector types accordingly. If a SIL164 chip has been detected, ast will now create a DVI-I connector instead of a VGA connector. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220207141544.30015-10-tzimmermann@suse.de
|
#
3ab26edd |
|
07-Feb-2022 |
Thomas Zimmermann <tzimmermann@suse.de> |
drm/ast: Move DP501-based connector code into separate helpers Add helpers for DP501-based connectors. DP501 provides output via DisplayPort. This used to be handled by the VGA connector code. If a DP501 chip has been detected, ast will now create a DisplayPort connector instead of a VGA connector. Remove the DP501 code from ast_vga_connector_helper_get_modes(). Also remove the call to drm_connector_update_edid_property(), which is performed by drm_get_edid(). Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220207141544.30015-9-tzimmermann@suse.de
|
#
a59b0264 |
|
07-Feb-2022 |
Thomas Zimmermann <tzimmermann@suse.de> |
drm/ast: Initialize encoder and connector for VGA in helper function Move encoder and connector initialization into a single helper and put all related mode-setting structures into a single place. Done in preparation of moving transmitter code into separate helpers. No functional changes. v2: * move encoder CRTC bitmask fix into separate patch (Javier) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220207141544.30015-7-tzimmermann@suse.de
|
#
b20384d9 |
|
07-Feb-2022 |
Thomas Zimmermann <tzimmermann@suse.de> |
drm/ast: Rename struct ast_connector to struct ast_vga_connector Prepare for introducing other connectors besides VGA. No functional changes. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220207141544.30015-6-tzimmermann@suse.de
|
#
84d826c8 |
|
07-Feb-2022 |
Thomas Zimmermann <tzimmermann@suse.de> |
drm/ast: Remove unused value dp501_maxclk Remove reading the link-rate. The value is maintained by the connector code but never used. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220207141544.30015-5-tzimmermann@suse.de
|
#
042ddf66 |
|
07-Feb-2022 |
Thomas Zimmermann <tzimmermann@suse.de> |
drm/ast: Remove AST_TX_ITE66121 constant The ITE66121 is an HDMI transmitter chip. There's no code for detecting or programming the chip within ast. Remove the enum constant. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220207141544.30015-4-tzimmermann@suse.de
|
#
7938f421 |
|
04-Feb-2022 |
Lucas De Marchi <lucas.demarchi@intel.com> |
dma-buf-map: Rename to iosys-map Rename struct dma_buf_map to struct iosys_map and corresponding APIs. Over time dma-buf-map grew up to more functionality than the one used by dma-buf: in fact it's just a shim layer to abstract system memory, that can be accessed via regular load and store, from IO memory that needs to be acessed via arch helpers. The idea is to extend this API so it can fulfill other needs, internal to a single driver. Example: in the i915 driver it's desired to share the implementation for integrated graphics, which uses mostly system memory, with discrete graphics, which may need to access IO memory. The conversion was mostly done with the following semantic patch: @r1@ @@ - struct dma_buf_map + struct iosys_map @r2@ @@ ( - DMA_BUF_MAP_INIT_VADDR + IOSYS_MAP_INIT_VADDR | - dma_buf_map_set_vaddr + iosys_map_set_vaddr | - dma_buf_map_set_vaddr_iomem + iosys_map_set_vaddr_iomem | - dma_buf_map_is_equal + iosys_map_is_equal | - dma_buf_map_is_null + iosys_map_is_null | - dma_buf_map_is_set + iosys_map_is_set | - dma_buf_map_clear + iosys_map_clear | - dma_buf_map_memcpy_to + iosys_map_memcpy_to | - dma_buf_map_incr + iosys_map_incr ) @@ @@ - #include <linux/dma-buf-map.h> + #include <linux/iosys-map.h> Then some files had their includes adjusted and some comments were update to remove mentions to dma-buf-map. Since this is not specific to dma-buf anymore, move the documentation to the "Bus-Independent Device Accesses" section. v2: - Squash patches v3: - Fix wrong removal of dma-buf.h from MAINTAINERS - Move documentation from dma-buf.rst to device-io.rst v4: - Change documentation title and level Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Acked-by: Christian König <christian.koenig@amd.com> Acked-by: Sumit Semwal <sumit.semwal@linaro.org> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20220204170541.829227-1-lucas.demarchi@intel.com
|
#
d0a0b6cd |
|
06-Dec-2021 |
Thomas Zimmermann <tzimmermann@suse.de> |
drm/ast: Move I2C code into separate source file Move I2C code into its own source file. Makes the mode-setting code a little less convoluted. v3: * fix SPDX tag to say 'SPDX-License-Identifier' Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20211206091125.29501-4-tzimmermann@suse.de
|
#
23b405bf |
|
16-Sep-2021 |
Thomas Zimmermann <tzimmermann@suse.de> |
drm/ast: Use managed interfaces for framebuffer write combining Replace arch_phys_wc_add() and arch_io_reserve_memtype_wc() with the rsp managed functions. Allows for removing the cleanup code for memory management Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210916181601.9146-4-tzimmermann@suse.de
|
#
f34bf652 |
|
09-Jul-2021 |
KuoHsiang Chou <kuohsiang_chou@aspeedtech.com> |
drm/ast: Disable fast reset after DRAM initial [Bug][AST2500] V1: When AST2500 acts as stand-alone VGA so that DRAM and DVO initialization have to be achieved by VGA driver with P2A (PCI to AHB) enabling. However, HW suggests disable Fast reset mode after DRAM initializaton, because fast reset mode is mainly designed for ARM ICE debugger. Once Fast reset is checked as enabling, WDT (Watch Dog Timer) should be first enabled to avoid system deadlock before disable fast reset mode. V2: Use to_pci_dev() to get revision of PCI configuration. V3: If SCU00 is not unlocked, just enter its password again. It is unnecessary to clear AHB lock condition and restore WDT default setting again, before Fast-reset clearing. V4: repatch after "error : could not build fake ancestor" resolved. V5: Since CVE_2019_6260 item3, Most of AST2500 have disabled P2A(PCIe to AMBA). However, for backward compatibility, some patches about P2A, such as items of v5.2 and v5.3, are considered to be upstreamed with comments. 1. Add define macro to improve source readability. ast_drv.h, ast_main.c, ast_post.c 2. Add comment about "Fast restet" is enabled for ARM-ICE debugger ast_post.c 3. Add comment about Reset USB port to patch USB unknown device issue ast_post.c Signed-off-by: KuoHsiang Chou <kuohsiang_chou@aspeedtech.com> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20210709080900.4056-1-kuohsiang_chou@aspeedtech.com
|
#
ba4e0339 |
|
21-Apr-2021 |
KuoHsiang Chou <kuohsiang_chou@aspeedtech.com> |
drm/ast: Fixed CVE for DP501 [Bug][DP501] If ASPEED P2A (PCI to AHB) bridge is disabled and disallowed for CVE_2019_6260 item3, and then the monitor's EDID is unable read through Parade DP501. The reason is the DP501's FW is mapped to BMC addressing space rather than Host addressing space. The resolution is that using "pci_iomap_range()" maps to DP501's FW that stored on the end of FB (Frame Buffer). In this case, FrameBuffer reserves the last 2MB used for the image of DP501. Signed-off-by: KuoHsiang Chou <kuohsiang_chou@aspeedtech.com> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20210421085859.17761-1-kuohsiang_chou@aspeedtech.com
|
#
385131f3 |
|
09-Feb-2021 |
Thomas Zimmermann <tzimmermann@suse.de> |
drm/ast: Store each HW cursor offset after pinning the rsp BO As HW cursor BOs never move, we can store the offset in VRAM in the cursor-plane's HWC state. This removes the last possible source of runtime errors from atomic_update. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210209134632.12157-10-tzimmermann@suse.de
|
#
84810d6a |
|
09-Feb-2021 |
Thomas Zimmermann <tzimmermann@suse.de> |
drm/ast: Map HW cursor BOs permanently The BOs of the hardware cursor are now mapped permanently while the cursor plane is being used. This reduces the CPU overhead of the cursor plane's atomic_update function. The change also resolves a problem with the vmap call in the commit tail. The vmap implementation could acquire the DMA reservation lock on the BO, which is not allowed that late in the atomic update. Removing the vmap call from atomic_update fixes the issue. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210209134632.12157-9-tzimmermann@suse.de
|
#
afee7e95 |
|
09-Feb-2021 |
Thomas Zimmermann <tzimmermann@suse.de> |
drm/ast: Store cursor BOs in cursor plane The cursor uses two BOs in video RAM to implement double buffering. Store both in struct ast_cursor_plane. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210209134632.12157-8-tzimmermann@suse.de
|
#
a0ba992d |
|
09-Feb-2021 |
Thomas Zimmermann <tzimmermann@suse.de> |
drm/ast: Add cursor-plane data structure Cursor state is currently located throughout struct ast_private. Having struct ast_cursor_plane as dedicated data structure for cursors helps to organize the modesetting code. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210209134632.12157-7-tzimmermann@suse.de
|
#
718c2286 |
|
09-Feb-2021 |
Thomas Zimmermann <tzimmermann@suse.de> |
drm/ast: Inline ast cursor-update functions into modesetting code The logic for cursor updates is now located in the cursor plane's modesetting code. A number of helper functions remain to modify the rsp registers and image. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210209134632.12157-6-tzimmermann@suse.de
|
#
22b6591f |
|
09-Feb-2021 |
Thomas Zimmermann <tzimmermann@suse.de> |
drm/ast: Allocate HW cursor BOs during cursor-plane initialization The BOs are eventually released by the cursor plane's destroy callback. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210209134632.12157-5-tzimmermann@suse.de
|
#
4a11bd1e |
|
09-Feb-2021 |
Thomas Zimmermann <tzimmermann@suse.de> |
drm/ast: Add constants for VGACRCB register bits Set the bits in VGACRCB with constants. Alo move the rsp code into a helper function. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210209134632.12157-2-tzimmermann@suse.de
|
#
78336798 |
|
09-Dec-2020 |
Thomas Zimmermann <tzimmermann@suse.de> |
drm/ast: Only map cursor BOs during updates The HW cursor's BO used to be mapped permanently into the kernel's address space. GEM's vmap operation will be protected by locks, and we don't want to lock the BO's for an indefinate period of time. Change the cursor code to map the HW BOs only during updates. The vmap operation in VRAM helpers is cheap, as a once estabished mapping is being reused until the BO actually moves. As the HW cursor BOs are permanently pinned, they never move at all. v2: * fix typos in commit description Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Christian König <christian.koenig@amd.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20201209142527.26415-3-tzimmermann@suse.de
|
#
f9bd00e0 |
|
09-Nov-2020 |
KuoHsiang Chou <kuohsiang_chou@aspeedtech.com> |
drm/ast: Create chip AST2600 [New] Support AST2600 Signed-off-by: KuoHsiang Chou <kuohsiang_chou@aspeedtech.com> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20201109093812.161483-1-kuohsiang_chou@aspeedtech.com
|
#
49a3f51d |
|
03-Nov-2020 |
Thomas Zimmermann <tzimmermann@suse.de> |
drm/gem: Use struct dma_buf_map in GEM vmap ops and convert GEM backends This patch replaces the vmap/vunmap's use of raw pointers in GEM object functions with instances of struct dma_buf_map. GEM backends are converted as well. For most of them, this simply changes the returned type. TTM-based drivers now return information about the location of the memory, either system or I/O memory. GEM VRAM helpers and qxl now use ttm_bo_vmap() et al. Amdgpu, nouveau and radeon use drm_gem_ttm_vmap() et al instead of implementing their own vmap callbacks. v7: * init QXL cursor to mapped BO buffer (kernel test robot) v5: * update vkms after switch to shmem v4: * use ttm_bo_vmap(), drm_gem_ttm_vmap(), et al. (Daniel, Christian) * fix a trailing { in drm_gem_vmap() * remove several empty functions instead of converting them (Daniel) * comment uses of raw pointers with a TODO (Daniel) * TODO list: convert more helpers to use struct dma_buf_map Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Christian König <christian.koenig@amd.com> Tested-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20201103093015.1063-7-tzimmermann@suse.de
|
#
70a59dd8 |
|
04-Nov-2020 |
Daniel Vetter <daniel.vetter@ffwll.ch> |
drm/<drivers>: Constify struct drm_driver Only the following drivers aren't converted: - amdgpu, because of the driver_feature mangling due to virt support. Subsequent patch will address this. - nouveau, because DRIVER_ATOMIC uapi is still not the default on the platforms where it's supported (i.e. again driver_feature mangling) - vc4, again because of driver_feature mangling - qxl, because the ioctl table is somewhere else and moving that is maybe a bit too much, hence the num_ioctls assignment prevents a const driver structure. - arcpgu, because that is stuck behind a pending tiny-fication series from me. - legacy drivers, because legacy requires non-const drm_driver. Note that for armada I also went ahead and made the ioctl array const. Only cc'ing the driver people who've not been converted (everyone else is way too much). v2: Fix one misplaced const static, should be static const (0day) v3: - Improve commit message (Sam) Acked-by: Sam Ravnborg <sam@ravnborg.org> Cc: kernel test robot <lkp@intel.com> Acked-by: Maxime Ripard <mripard@kernel.org> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Dave Airlie <airlied@redhat.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: virtualization@lists.linux-foundation.org Cc: Harry Wentland <harry.wentland@amd.com> Cc: Leo Li <sunpeng.li@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: Eric Anholt <eric@anholt.net> Cc: Maxime Ripard <mripard@kernel.org> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: nouveau@lists.freedesktop.org Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201104100425.1922351-5-daniel.vetter@ffwll.ch
|
#
39edb287 |
|
14-Sep-2020 |
Thomas Zimmermann <tzimmermann@suse.de> |
drm/ast: Disable planes while switching display modes The ast HW cursor requires the primary plane and CRTC to display at a valid mode and format. This is not the case while switching display modes, which can lead to the screen turing permanently dark. As a workaround, the ast driver now disables active planes while the mode or format switch takes place. It also synchronizes with the vertical refresh to give CRTC and planes some time to catch up on each other. The active planes planes (primary or cursor) will be re-enabled by each plane's atomic_update() function. v3: * move the logic into the CRTC's atomic_disable function v2: * move the logic into the commit-tail function Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20200914072236.19398-3-tzimmermann@suse.de
|
#
cff0adca |
|
30-Jul-2020 |
Thomas Zimmermann <tzimmermann@suse.de> |
drm/ast: Managed device release This turns the ast's device cleanup code into a managed release helper function. Note that the code uses devres helpers. The release function switches the device back to VGA mode and therefore runs during HW device cleanup; not at DRM device cleanup. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20200730135206.30239-10-tzimmermann@suse.de
|
#
2c0b6566 |
|
30-Jul-2020 |
Thomas Zimmermann <tzimmermann@suse.de> |
drm/ast: Managed release of ast firmware The ast driver loads firmware for the DP501 display encoder. The patch replaces the removal code with a managed release function. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200730135206.30239-8-tzimmermann@suse.de
|
#
e0f5a738 |
|
30-Jul-2020 |
Thomas Zimmermann <tzimmermann@suse.de> |
drm/ast: Embed struct drm_device in struct ast_private Turns struct ast_private into a subclass of struct drm_device by embedding the latter. This allows for using DRM's managed device allocation. The use of struct drm_device.dev_private is deprecated. The patch converts the last remaining users to to_ast_private(). Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200730135206.30239-7-tzimmermann@suse.de
|
#
fbe01716 |
|
30-Jul-2020 |
Thomas Zimmermann <tzimmermann@suse.de> |
drm/ast: Replace driver load/unload functions with device create/destroy The ast driver's load and unload functions are left-overs from when struct drm_driver.load/unload was still in use. The PCI probe helper allocated the DRM device and ran load to initialize it. This patch replaces this code with device create and destroy. The main difference is that the device's create function allocates the DRM device and ast structures in the same place. This will be required for switching ast to managed allocations. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200730135206.30239-4-tzimmermann@suse.de
|
#
6a470dc2 |
|
30-Jul-2020 |
Thomas Zimmermann <tzimmermann@suse.de> |
drm/ast: Embed CRTC and connector in struct ast_private Only single instances of CRTC and connector are supported per device. Embed both in ast's structure and remove the individual memory allocations. DRM's CRTC cleanup helpers replace the rsp. destroy function in ast. While at it, also convert to_ast_connector() to a function. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200730135206.30239-2-tzimmermann@suse.de
|
#
03ba7e00 |
|
16-Jul-2020 |
Thomas Zimmermann <tzimmermann@suse.de> |
drm/ast: Use managed MM initialization Cleaning up ast's MM code with ast_mm_fini() resets the write-combine flags on the VRAM I/O memory. Drop ast_mm_fini() in favor of an auto- release callback. Releasing the device also executes the callback. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200716125353.31512-7-tzimmermann@suse.de
|
#
0149e780 |
|
16-Jul-2020 |
Thomas Zimmermann <tzimmermann@suse.de> |
drm/ast: Move VRAM size detection to ast_mm.c VRAM size detection is only relevant to the memory management. Move the code into ast_mm.c. While at it, rename the function to ast_get_vram_size(). The function argument's type is now struct ast_private. The result is stored in a local variable and not in struct ast_private any longer. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200716125353.31512-5-tzimmermann@suse.de
|
#
e6949ff3 |
|
02-Jul-2020 |
Thomas Zimmermann <tzimmermann@suse.de> |
drm/ast: Initialize mode setting in ast_mode_config_init() There's modesetting init code in ast_main.c. Move it to ast_mode.c and merge it with the modesetting init code in ast_mode_init(). The result is ast_mode_config_init(), which initalizes the whole modesetting. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200702115029.5281-15-tzimmermann@suse.de
|
#
1728bf64 |
|
02-Jul-2020 |
Thomas Zimmermann <tzimmermann@suse.de> |
drm/ast: Use managed mode-config init Using drmm_mode_config_init() sets up managed release of modesetting resources. The existing modesetting's finalizer is empty, so remove it. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200702115029.5281-14-tzimmermann@suse.de
|
#
c35da0ed |
|
02-Jul-2020 |
Thomas Zimmermann <tzimmermann@suse.de> |
drm/ast: Replace struct ast_crtc with struct drm_crtc Struct ast_crtc has been cleaned up and it's now a wrapper around the DRM CRTC structure struct drm_crtc. This patch converts the driver to struct drm_crtc and removes struct ast_crtc. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200702115029.5281-13-tzimmermann@suse.de
|
#
3e9d7873 |
|
02-Jul-2020 |
Thomas Zimmermann <tzimmermann@suse.de> |
drm/ast: Managed cursor release Register a release function to finalize cursors. The _fini() function gets un-exported from the source file. The function ast_mode_fini() is now empty and will be removed by a later patch. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200702115029.5281-11-tzimmermann@suse.de
|
#
0d384eec |
|
02-Jul-2020 |
Thomas Zimmermann <tzimmermann@suse.de> |
drm/ast: Keep cursor HW BOs mapped Updating the image in a cursor's HW BO requires a mapping of the BO's buffer in the kernel's address space. Cursor image updates can happen frequently and create CPU overhead. As cursor HW BOs are small and never move, they are now map exactly once during the initialization and the mapping is used throughout the driver's lifetime. This change also removes a possible source of failures from ast_cursor_show(). As the helper does not establish mappings, it cannot fail. As a result, the cursor plane's atomic-update helper does not call any failable interfaces. All failures are detected before trying to update the cursor plane. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200702115029.5281-10-tzimmermann@suse.de
|
#
c91eadd1 |
|
02-Jul-2020 |
Thomas Zimmermann <tzimmermann@suse.de> |
drm/ast: Add helper to hide cursor As the inverse to ast_cursor_show(), ast_cursor_hide() disables the HW cursor. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200702115029.5281-9-tzimmermann@suse.de
|
#
81039adc |
|
02-Jul-2020 |
Thomas Zimmermann <tzimmermann@suse.de> |
drm/ast: Replace ast_cursor_move() with ast_cursor_show() Having a cursor move function is misleading, as it actually enables the cursor's image for displaying. So rename it to ast_cursor_show(). It's semantics is to show a cursor at the specified location on the screen. The displayed cursor is always the image in the cursor front BO. This change also simplifies struct ast_crtc to being a mere wrapper around around struct drm_crtc. It will be removed by a later patch. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200702115029.5281-7-tzimmermann@suse.de
|
#
75d9d8e6 |
|
02-Jul-2020 |
Thomas Zimmermann <tzimmermann@suse.de> |
drm/ast: Move cursor pageflip into helper The new helper ast_cursor_page_flip() switches the cursor's front and back BOs. This simplifies the cursor plane's update helper. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200702115029.5281-6-tzimmermann@suse.de
|
#
dd004b9a |
|
02-Jul-2020 |
Thomas Zimmermann <tzimmermann@suse.de> |
drm/ast: Move cursor fb pinning and mapping into helper The new helper ast_cursor_blit() updates a cursor's backbuffer HW BO from a framebuffer structure. The cursor plane's prepare_fb() function now uses the new interface. Pinning and mapping of BOs is done automatically by the helper. This includes the source BO, which was not pinned by the original code in prepare_fb(). Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200702115029.5281-4-tzimmermann@suse.de
|
#
beb2355e |
|
02-Jul-2020 |
Thomas Zimmermann <tzimmermann@suse.de> |
drm/ast: Pass struct ast_private instance to cursor init/fini functions Removes some typecasting. v2: * use to_ast_private() instead of struct drm_device.dev_private Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200702115029.5281-3-tzimmermann@suse.de
|
#
2ccebf56 |
|
02-Jul-2020 |
Thomas Zimmermann <tzimmermann@suse.de> |
drm/ast: Move cursor functions to ast_cursor.c The cursor manipulation functions are unrelated to modesetting. Move them into their own file. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200702115029.5281-2-tzimmermann@suse.de
|
#
fa7dbd76 |
|
17-Jun-2020 |
Thomas Zimmermann <tzimmermann@suse.de> |
drm/ast: Upcast from DRM device to ast structure via to_ast_private() All upcasting from struct drm_device to struct ast_private is now performed via to_ast_private(). Using struct drm_device.dev_private is deprecated. The ast variable in ast_crtc_helper_atomic_check() is unused, so removed it. v2: * fix typo in commit message Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200617080340.29584-4-tzimmermann@suse.de
|
#
05f13f5b |
|
17-Jun-2020 |
Thomas Zimmermann <tzimmermann@suse.de> |
drm/ast: Remove unused code paths for AST 1180 The ast driver contains code paths for AST 1180 chips. The chip is not supported and the rsp code has never been tested. Simplify the driver by removing the AST 1180 code. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200617080340.29584-2-tzimmermann@suse.de
|
#
4220fdf0 |
|
28-Feb-2020 |
Thomas Zimmermann <tzimmermann@suse.de> |
drm/ast: Use simple encoder The ast driver uses an empty implementation for its encoder. Replace the code with the generic simple encoder. v2: * rebase onto new simple-encoder interface Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200228081828.18463-3-tzimmermann@suse.de
|
#
3339fdf5 |
|
01-Dec-2019 |
Thomas Zimmermann <tzimmermann@suse.de> |
drm/ast: Store primary-plane format in struct ast_crtc_state Reading the primary plane's framebuffer from the CRTC's atomic_flush() function is fragile as the plane state or framebuffer can be NULL. Instead, we let the plane's atomic_check() store the framebuffer format in the CRTC state. The CRTC always receives the framebuffer format that is currently programmed, or NULL if no mode has been set yet. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191202111557.15176-8-tzimmermann@suse.de
|
#
e7d70cd4 |
|
01-Dec-2019 |
Thomas Zimmermann <tzimmermann@suse.de> |
drm/ast: Store VBIOS mode info in struct ast_crtc_state After looking up VBIOS mode information in CRTC's atomic_check(), we can reuse it in atomic_flush(). No need for a second look-up. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191202111557.15176-7-tzimmermann@suse.de
|
#
83be6a3c |
|
01-Dec-2019 |
Thomas Zimmermann <tzimmermann@suse.de> |
drm/ast: Introduce struct ast_crtc_state AST-specific CRTC state can be placed in the new struct ast_crtc_state. The atomic check functions of the CRTC and the primary plane will store the VBIOS mode info and the framebuffer format here. The CRTC will consume these during atomic_flush(). Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191202111557.15176-6-tzimmermann@suse.de
|
#
02f3bb75 |
|
07-Nov-2019 |
Thomas Zimmermann <tzimmermann@suse.de> |
drm/ast: Add cursor plane The cursor plane uses an internal format of ARGB4444. To userspace, we announce ARGB8888 and do the transformation internally. v2: * don't set plane call-back functions to NULL explicitly * define plane format array in global scope Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191107083404.6852-9-tzimmermann@suse.de
|
#
a6ff807b |
|
07-Nov-2019 |
Thomas Zimmermann <tzimmermann@suse.de> |
drm/ast: Add primary plane Like the original mode-setting code, the primary plane supports XRGB888, RGB565 and C8. The plane itself only pins BOs and sets the base address and scanline offset. The mode-setting code will be located in the CRTC's atomic helpers. v2: * don't set plane call-back functions to NULL explicitly * define plane format array in global scope Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191107083404.6852-7-tzimmermann@suse.de
|
#
5a1505e7 |
|
07-Nov-2019 |
Thomas Zimmermann <tzimmermann@suse.de> |
drm/ast: Remove last traces of struct ast_gem_object The ast driver has switched to struct drm_vram_gem_object a while ago. This patch removes a function and forward declaration that were forgotten before. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191107083404.6852-2-tzimmermann@suse.de
|
#
0090ef3e |
|
27-Sep-2019 |
Thomas Zimmermann <tzimmermann@suse.de> |
drm/ast: Allocate cursor BOs at high end of video memory By putting cursor BOs at the high end of the video memory, we can avoid memory fragmentation. Starting at the low end, contiguous video memory is available for framebuffers. The patch also simplifies the buffer swapping by splitting struct ast_private.cursor_cache BO into two separate boffer objects. Cursor images alternate between these buffers instead of offsets within cursor_cache. v3: * fixes space-before-tab error near AST_HWC_SIGNATURE_CHECKSUM Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190927090309.10254-6-tzimmermann@suse.de
|
#
fbbbd160 |
|
30-Jun-2019 |
Sam Ravnborg <sam@ravnborg.org> |
drm/ast: drop use of drmP.h Drop use of the deprecated drmP.h header file. While touching the files divide include files in blocks and sort the include files in the individual blocks. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Emil Velikov <emil.velikov@collabora.com> Cc: Dave Airlie <airlied@redhat.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: "Christian König" <christian.koenig@amd.com> Cc: Sam Bobroff <sbobroff@linux.ibm.com> Cc: YueHaibing <yuehaibing@huawei.com> Cc: Huang Rui <ray.huang@amd.com> Cc: "Y.C. Chen" <yc_chen@aspeedtech.com> Cc: Hans de Goede <hdegoede@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190630061922.7254-33-sam@ravnborg.org
|
#
8a99de3d |
|
03-Jul-2019 |
Thomas Zimmermann <tzimmermann@suse.de> |
drm/ast: Replace struct ast_fbdev with generic framebuffer emulation This patch replaces ast's framebuffer console with DRM's generic implememtation. All respective code is being removed from the driver. The console is set up with a shadow buffer. The actual buffer object is not permanently pinned in video ram, but just another buffer object that the driver moves in and out of vram as necessary. The driver's function ast_crtc_do_set_base() used to contain special handling for the framebuffer console. With the new generic framebuffer, the driver does not need this code an longer. v2: * use drm_fb_helper_set_suspend_unlocked() in ast_drm_{thaw,freeze}() * dirty function no longer required Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Noralf Trønnes <noralf@tronnes.org> Link: https://patchwork.freedesktop.org/patch/315835/
|
#
5ed7191d |
|
27-Jun-2019 |
Thomas Zimmermann <tzimmermann@suse.de> |
drm/ast: Replace struct ast_framebuffer with GEM framebuffer helpers The ast driver's struct ast_framebuffer is a buffer object with GEM interface. There are already GEM framebuffer helpers that implement the same functionality. Convert ast to these. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20190627173410.8300-1-tzimmermann@suse.de
|
#
ff771bb1 |
|
13-Jun-2019 |
Thomas Zimmermann <tzimmermann@suse.de> |
drm/ast: Remove obsolete or unused cursor state The ast driver's data structures store unused or uncecessary cursor state. Most of the cursor state is already stored elsewhere and can be retrieved when necessary. Remove the obsolete fields and adapt users accordingly. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190613073041.29350-4-tzimmermann@suse.de
|
#
3f87330e |
|
08-May-2019 |
Thomas Zimmermann <tzimmermann@suse.de> |
drm/ast: Replace mapping code with drm_gem_vram_{kmap/kunmap}() The AST driver establishes several memory mappings for frame buffers and cursors. This patch converts the driver to use the equivalent drm_gem_vram_kmap() functions. It removes the dependencies on TTM and cleans up the code. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: http://patchwork.freedesktop.org/patch/msgid/20190508082630.15116-12-tzimmermann@suse.de Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
#
969562b2 |
|
08-May-2019 |
Thomas Zimmermann <tzimmermann@suse.de> |
drm/ast: Convert AST driver to VRAM MM The data structure |struct drm_vram_mm| and its helpers replace ast's TTM-based memory manager. It's the same implementation; except for the type names. v4: * don't select DRM_TTM or DRM_VRAM_MM_HELPER v3: * use drm_gem_vram_mm_funcs * convert driver to drm_device-based instance v2: * implement ast_mmap() with drm_vram_mm_mmap() Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: http://patchwork.freedesktop.org/patch/msgid/20190508082630.15116-11-tzimmermann@suse.de Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
#
5b370979 |
|
08-May-2019 |
Thomas Zimmermann <tzimmermann@suse.de> |
drm/ast: Convert AST driver to |struct drm_gem_vram_object| The data structure |struct drm_gem_vram_object| and its helpers replace |struct ast_bo|. It's the same implementation; except for the type names. v4: * cleanups from checkpatch.pl Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: http://patchwork.freedesktop.org/patch/msgid/20190508082630.15116-10-tzimmermann@suse.de Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
#
2f5791cd |
|
26-Mar-2019 |
Daniel Vetter <daniel.vetter@ffwll.ch> |
drm/ast: Use drm_fb_helper_fill_info Should not result in any changes. v2: Rebase Acked-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: Dave Airlie <airlied@redhat.com> Cc: Junwei Zhang <Jerry.Zhang@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Sean Paul <sean@poorly.run> Cc: YueHaibing <yuehaibing@huawei.com> Cc: Sam Bobroff <sbobroff@linux.ibm.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190326132008.11781-6-daniel.vetter@ffwll.ch
|
#
aa8e2435 |
|
07-Feb-2019 |
Thomas Zimmermann <tzimmermann@suse.de> |
drm/ttm: Define a single DRM_FILE_PAGE_OFFSET constant Most TTM drivers define the constant DRM_FILE_PAGE_OFFSET of the same value. The only exception is vboxvideo, which is being converted to the new offset by this patch. Unifying the constants in a single place simplifies the driver code. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Christian König <christian.koenig@amd.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
#
a64f784b |
|
19-Oct-2018 |
Christian König <christian.koenig@amd.com> |
drm/ttm: initialize globals during device init (v2) Make sure that the global BO state is always correctly initialized. This allows removing all the device code to initialize it. v2: fix up vbox (Alex) Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
#
27eb1fa9 |
|
19-Oct-2018 |
Christian König <christian.koenig@amd.com> |
drm/ttm: use a static ttm_mem_global instance As the name says we only need one global instance of ttm_mem_global. Drop all the driver initialization and just use a single exported instance which is initialized during BO global initialization. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
#
3bffd962 |
|
13-Jul-2017 |
Peter Rosin <peda@axentia.se> |
drm: ast: remove dead code and pointless local lut storage The redundant fb helpers .load_lut, .gamma_set and .gamma_get are no longer used. Remove the dead code and hook up the crtc .gamma_set to use the crtc gamma_store directly instead of duplicating that info locally. Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20170713162538.22788-7-peda@axentia.se
|
#
12f8030e |
|
18-Jul-2017 |
Egbert Eich <eich@suse.de> |
drm/ast: Actually load DP501 firmware when required The ast driver has a code to load the DP501 firmware, but it's never used. This patch implements its actual usage by requesting the firmware on demand, and release the firmware at exit as well. Also the path contains a few cleanups and makes relevant functions static. Signed-off-by: Egbert Eich <eich@suse.de> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Dave Airlie <airlied@redhat.com>
|
#
9f93c8b3 |
|
16-Feb-2017 |
Y.C. Chen <yc_chen@aspeedtech.com> |
drm/ast: Base support for AST2500 Add detection and mode setting updates for AST2500 generation chip, code originally from Aspeed and slightly reworked for coding style mostly by Ben. This doesn't contain the BMC DRAM POST code which is in a separate patch. Signed-off-by: Y.C. Chen <yc_chen@aspeedtech.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Dave Airlie <airlied@redhat.com>
|
#
22acdbb1 |
|
16-Feb-2017 |
Benjamin Herrenschmidt <benh@kernel.crashing.org> |
drm/ast: const'ify mode setting tables And fix some comment alignment & space/tabs while at it Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Dave Airlie <airlied@redhat.com>
|
#
71f677a9 |
|
16-Feb-2017 |
Russell Currey <ruscur@russell.cc> |
drm/ast: Handle configuration without P2A bridge The ast driver configures a window to enable access into BMC memory space in order to read some configuration registers. If this window is disabled, which it can be from the BMC side, the ast driver can't function. Closing this window is a necessity for security if a machine's host side and BMC side are controlled by different parties; i.e. a cloud provider offering machines "bare metal". A recent patch went in to try to check if that window is open but it does so by trying to access the registers in question and testing if the result is 0xffffffff. This method will trigger a PCIe error when the window is closed which on some systems will be fatal (it will trigger an EEH for example on POWER which will take out the device). This patch improves this in two ways: - First, if the firmware has put properties in the device-tree containing the relevant configuration information, we use these. - Otherwise, a bit in one of the SCU scratch registers (which are readable via the VGA register space and writeable by the BMC) will indicate if the BMC has closed the window. This bit has been defined by Y.C Chen from Aspeed. If the window is closed and the configuration isn't available from the device-tree, some sane defaults are used. Those defaults are hopefully sufficient for standard video modes used on a server. Signed-off-by: Russell Currey <ruscur@russell.cc> Acked-by: Joel Stanley <joel@jms.id.au> Cc: <stable@vger.kernel.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
|
#
6c971c09 |
|
25-Jan-2017 |
Y.C. Chen <yc_chen@aspeedtech.com> |
drm/ast: Fixed system hanged if disable P2A The original ast driver will access some BMC configuration through P2A bridge that can be disabled since AST2300 and after. It will cause system hanged if P2A bridge is disabled. Here is the update to fix it. Signed-off-by: Y.C. Chen <yc_chen@aspeedtech.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
|
#
11b3c20b |
|
06-Jan-2017 |
Gabriel Krisman Bertazi <krisman@collabora.co.uk> |
drm: Change the return type of the unload hook to void The integer returned by the unload hook is ignored by the drm core, so let's make it void. This patch was created using the following Coccinelle semantic script (except for the declaration and comment in drm_drv.h): Compile-tested only. // <smpl> @ get_name @ struct drm_driver drv; identifier fn; @@ drv.unload = fn; @ replace_type @ identifier get_name.fn; @@ - int + void fn (...) { ... } @ remove_return_param @ identifier get_name.fn; @@ void fn (...) { <... if (...) return - ... ; ...> } @ drop_final_return @ identifier get_name.fn; @@ void fn (...) { ... - return 0; } // </smpl> Suggested-by: Daniel Vetter <daniel.vetter@intel.com> Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.co.uk> Acked-by: Christian König <christian.koenig@amd.com>. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20170106175731.29196-1-krisman@collabora.co.uk
|
#
9338203c |
|
28-Nov-2016 |
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> |
drm: Don't include <drm/drm_encoder.h> in <drm/drm_crtc.h> <drm/drm_crtc.h> used to define most of the in-kernel KMS API. It has now been split into separate files for each object type, but still includes most other KMS headers to avoid breaking driver compilation. As a step towards fixing that problem, remove the inclusion of <drm/drm_encoder.h> from <drm/drm_crtc.h> and include it instead where appropriate. Also remove the forward declarations of the drm_encoder and drm_encoder_helper_funcs structures from <drm/drm_crtc.h> as they're not needed in the header. <drm/drm_encoder.h> now has to include <drm/drm_mode.h> and contain a forward declaration of struct drm_encoder in order to allow including it as the first header in a compilation unit. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Sinclair Yeh <syeh@vmware.com> # For vmwgfx Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/1481709550-29226-2-git-send-email-laurent.pinchart+renesas@ideasonboard.com
|
#
dfd5e50e |
|
06-Apr-2016 |
Christian König <christian.koenig@amd.com> |
drm/ttm: remove use_ticket parameter from ttm_bo_reserve Not used any more. Reviewed-by: Sinclair Yeh <syeh@vmware.com> Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
#
1eb83451 |
|
11-Nov-2015 |
Ville Syrjälä <ville.syrjala@linux.intel.com> |
drm: Pass the user drm_mode_fb_cmd2 as const to .fb_create() Drivers shouldn't clobber the passed in addfb ioctl parameters. i915 was doing just that. To prevent it from happening again, pass the struct around as const, starting all the way from internal_framebuffer_create(). Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
#
cb119717 |
|
01-Nov-2015 |
Lukas Wunner <lukas@wunner.de> |
drm: Remove unused fbdev_list members I noticed that intel_fbdev->our_mode is unused. Introduced by 79e539453b34 ("DRM: i915: add mode setting support"). Then I noticed that intel_fbdev->fbdev_list is unused as well. Introduced by 386516744ba4 ("drm/fb: fix fbdev object model + cleanup properly.") in i915, nouveau and radeon. Subsequently cargo culted to amdgpu, ast, cirrus, qxl, udl, virtio and mgag200. Already removed from the latter with cc59487a05b1 ("drm/mgag200: 'fbdev_list' in 'struct mga_fbdev' is not used"). Remove it from the others. Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
#
28fb4cb7 |
|
11-Jun-2014 |
Egbert Eich <eich@suse.de> |
drm/ast: Initialized data needed to map fbdev memory Due to a missing initialization there was no way to map fbdev memory. Thus for example using the Xserver with the fbdev driver failed. This fix adds initialization for fix.smem_start and fix.smem_len in the fb_info structure, which fixes this problem. Requested-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: stable@vger.kernel.org Signed-off-by: Egbert Eich <eich@suse.de> [pulled from SuSE tree by me - airlied] Signed-off-by: Dave Airlie <airlied@redhat.com>
|
#
d9fc9413 |
|
23-Sep-2014 |
Daniel Vetter <daniel.vetter@ffwll.ch> |
drm: Extract <drm/drm_gem.h> v2: Don't forget git add, noticed by David. Cc: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Acked-by: David Herrmann <dh.herrmann@gmail.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
|
#
d1b98557 |
|
04-Sep-2014 |
Benjamin Herrenschmidt <benh@kernel.crashing.org> |
drm/ast: POST chip at probe time if VGA not enabled We need to do it on machines without a BIOS such as POWER8. Also for detection to work without triggering PCIe errors, we need to enable VGA early on, inside ast_detect_chip(). While touching those files, replace a few hard coded register numbers with the corresponding symbolic constant. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
|
#
0dd68309 |
|
04-Sep-2014 |
Benjamin Herrenschmidt <benh@kernel.crashing.org> |
drm/ast: Try to use MMIO registers when PIO isn't supported If the PIO resources haven't been assigned, then we have no choice but try to use the MMIO version. This is the case for example on POWER8 which doesn't support PIO at all. Chips rev 0x20 or later have MMIO decoding enabled by default. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
|
#
f1217ed0 |
|
27-Aug-2014 |
Christian König <christian.koenig@amd.com> |
drm/ttm: move fpfn and lpfn into each placement v2 This allows us to more fine grained specify where to place the buffer object. v2: rebased on drm-next, add bochs changes as well Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
|
#
ee3939e0 |
|
21-Jul-2014 |
Thierry Reding <treding@nvidia.com> |
drm/ttm: Fix a few sparse warnings The final parameter to ttm_bo_reserve() is a pointer, therefore callers should use NULL instead of 0. Fixes a bunch of sparse warnings of this type: warning: Using plain integer as NULL pointer Signed-off-by: Thierry Reding <treding@nvidia.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
|
#
83c6620b |
|
27-Mar-2014 |
Dave Airlie <airlied@redhat.com> |
drm/ast: initial DP501 support (v0.2) This is the initial attempt at porting the DP501 code from the userspace driver, the firmware file is in http://people.freedesktop.org/~airlied/ast_dp501_fw.bin this should really be exposed as another encoder/connector that is cloneable v0.2: init 3rd tx properly, add scratch reduction of VRAM size backup firmware properly. Signed-off-by: Dave Airlie <airlied@redhat.com>
|
#
1453bf4c |
|
27-Mar-2014 |
Dave Airlie <airlied@redhat.com> |
drm/ast: add AST 2400 support. This is ported from the userspace driver. Untested on any ast2400 hw so far. Signed-off-by: Dave Airlie <airlied@redhat.com>
|
#
f1f62f2c |
|
16-Jan-2014 |
Dave Airlie <airlied@redhat.com> |
drm/ast: add widescreen + rb modes from X.org driver (v2) This syncs up the mode code from the X.org driver upstream, and adds the mode validation step for hw that doesn't have widescreen. v2: (from Egbert Eich <eich@suse.de) squash drm/ast: Use correct structure member for mode validation to avoid bisect regression. In struct drm_display_mode crtc_hdisplay and crtc_vdisplay are holding the crtc parameters after mode fixup. For validation we need hdisplay and vdisplay. Signed-off-by: Egbert Eich <eich@suse.de> Signed-off-by: Dave Airlie <airlied@redhat.com>
|
#
16eb5f43 |
|
02-Oct-2013 |
David Herrmann <dh.herrmann@gmail.com> |
drm: kill ->gem_init_object() and friends All drivers embed gem-objects into their own buffer objects. There is no reason to keep drm_gem_object_alloc(), gem->driver_private and ->gem_init_object() anymore. New drivers are highly encouraged to do the same. There is no benefit in allocating gem-objects separately. Cc: Dave Airlie <airlied@gmail.com> Cc: Alex Deucher <alexdeucher@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Rob Clark <robdclark@gmail.com> Cc: Inki Dae <inki.dae@samsung.com> Cc: Ben Skeggs <skeggsb@gmail.com> Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
|
#
2e837813 |
|
11-Sep-2013 |
Dave Airlie <airlied@redhat.com> |
drm/ast: fix the ast open key function When porting from UMS I mistyped this from the wrong place, AST noticed and pointed it out, so we should fix it to be like the X.org driver. Reported-by: Y.C. Chen <yc_chen@aspeedtech.com> Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
|
#
43387b37 |
|
16-Jul-2013 |
Daniel Vetter <daniel.vetter@ffwll.ch> |
drm/gem: create drm_gem_dumb_destroy All the gem based kms drivers really want the same function to destroy a dumb framebuffer backing storage object. So give it to them and roll it out in all drivers. This still leaves the option open for kms drivers which don't use GEM for backing storage, but it does decently simplify matters for gem drivers. Acked-by: Inki Dae <inki.dae@samsung.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Intel Graphics Development <intel-gfx@lists.freedesktop.org> Cc: Ben Skeggs <skeggsb@gmail.com> Reviwed-by: Rob Clark <robdclark@gmail.com> Cc: Alex Deucher <alexdeucher@gmail.com> Acked-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
|
#
4094dc2a |
|
27-Jun-2013 |
Maarten Lankhorst <m.b.lankhorst@gmail.com> |
drm/ast: inline reservations Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
|
#
306373b6 |
|
02-May-2013 |
Dave Airlie <airlied@redhat.com> |
drm/ast: deal with bo reserve fail in dirty update path Port over the mgag200 fix to ast as it suffers the same issue. On F19 testing, it was noticed we get a lot of errors in dmesg about being unable to reserve the buffer when plymouth starts, this is due to the buffer being in the process of migrating, so it makes sense we can't reserve it. In order to deal with it, this adds delayed updates for the dirty updates, when the bo is unreservable, in the normal console case this shouldn't ever happen, its just when plymouth or X is pushing the console bo to system memory. Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
|
#
bfb89928 |
|
02-Dec-2012 |
Daniel Vetter <daniel.vetter@ffwll.ch> |
drm: only take the crtc lock for ->cursor_set First convert ->cursor_set to only take the crtc lock, since that seems to be the function with the least amount of state - the core ioctl function doesn't check anything which can change at runtime, so we don't have any object lifetime issues to contend. The only thing which is important is that the driver's implementation doesn't touch any state outside of that single crtc which is not yet properly protected by other locking: - ast: access the global ast->cache_kmap. Luckily we only have on crtc on this driver, so this is fine. Add a comment. - gma500: calls gma_power_begin|and and psb_gtt_pin|unpin, both which have their own locking to protect their state. Everything else is crtc-local. - i915: touches a bit of global gem state, all protected by the One Lock to Rule Them All (dev->struct_mutex). - nouveau: Pre-nv50 is all nice, nv50+ uses the evo channels to queue up all display changes. And some of these channels are device global. But this is fine now since the previous patch introduced an evo channel mutex. - radeon: Uses some indirect register access for cursor updates, but with the previous patches to protect these indirect 2-register access patterns with a spinlock, this should be fine now, too. - vmwgfx: I have no idea how that works - update_cursor_position doesn't take any per-crtc argument and I haven't figured out any other place where this could be set in some form of a side-channel. But vmwgfx definitely has more than one crtc (or at least can register more than one), so I have no idea how this is supposed to not fail with the current code already. Hence take the easy way out and simply acquire all locks (which requires dropping the crtc lock the core acquired for us). That way it's not worse off for consistency than the old code. Reviewed-by: Rob Clark <rob@ti.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
#
760285e7 |
|
02-Oct-2012 |
David Howells <dhowells@redhat.com> |
UAPI: (Scripted) Convert #include "..." to #include <path/...> in drivers/gpu/ Convert #include "..." to #include <path/...> in drivers/gpu/. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Dave Airlie <airlied@redhat.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: Dave Jones <davej@redhat.com>
|
#
a8e2fad3 |
|
20-Aug-2012 |
Maarten Lankhorst <maarten.lankhorst@canonical.com> |
drm/ast: remove unused validate_sequence Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
|
#
312fec14 |
|
29-Feb-2012 |
Dave Airlie <airlied@redhat.com> |
drm: Initial KMS driver for AST (ASpeed Technologies) 2000 series (v2) This is the initial driver for the Aspeed Technologies chips found in servers. This driver supports the AST 2000, 2100, 2200, 2150 and 2300. It doesn't support the AST11xx due to lack of hw to test it on, and them requiring different codepaths. This driver is intended to be used with xf86-video-modesetting in userspace. This driver has a slightly different design than other KMS drivers, but future server chips will probably share similiar setup. As these GPUs commonly have low video RAM, it doesn't make sense to put the kms console in VRAM always. This driver places the kms console into system RAM, and does dirty updates to a copy in video RAM. When userspace sets a new scanout buffer, it forcefully evicts the video RAM console, and X can create a framebuffer that can use all of of video RAM. This driver uses TTM but in a very simple fashion to control the eviction to system RAM of the console, and multiple servers. v2: add s/r support, fix Kconfig. Signed-off-by: Dave Airlie <airlied@redhat.com>
|