x86/cpu: Move cpu_l[l2]c_id into topology info

The topology IDs which identify the LLC and L2 domains clearly belong to
the per CPU topology information.

Move them into cpuinfo_x86::cpuinfo_topo and get rid of the extra per CPU
data and the related exports.

This also paves the way to do proper topology evaluation during early boot
because it removes the only per CPU dependency for that.

No functional change.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Juergen Gross <jgross@suse.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Tested-by: Michael Kelley <mikelley@microsoft.com>
Tested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Arjan van de Ven <arjan@linux.intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20230814085112.803864641@linutronix.de

x86/cacheinfo: Switch cache_ap_init() to hotplug callback

Instead of explicitly calling cache_ap_init() in
identify_secondary_cpu() use a CPU hotplug callback instead. By
registering the callback only after having started the non-boot CPUs
and initializing cache_aps_delayed_init with "true", calling
set_cache_aps_delayed_init() at boot time can be dropped.

It should be noted that this change results in cache_ap_init() being
called a little bit later when hotplugging CPUs. By using a new
hotplug slot right at the start of the low level bringup this is not
problematic, as no operations requiring a specific caching mode are
performed that early in CPU initialization.

Suggested-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20221102074713.21493-15-jgross@suse.com
Signed-off-by: Borislav Petkov <bp@suse.de>

x86/mtrr: Add a stop_machine() handler calling only cache_cpu_init()

Instead of having a stop_machine() handler for either a specific
MTRR register or all state at once, add a handler just for calling
cache_cpu_init() if appropriate.

Add functions for calling stop_machine() with this handler as well.

Add a generic replacement for mtrr_bp_restore() and a wrapper for
mtrr_bp_init().

Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20221102074713.21493-13-jgross@suse.com
Signed-off-by: Borislav Petkov <bp@suse.de>

x86/mtrr: Let cache_aps_delayed_init replace mtrr_aps_delayed_init

In order to prepare decoupling MTRR and PAT replace the MTRR-specific
mtrr_aps_delayed_init flag with a more generic cache_aps_delayed_init
one.

Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20221102074713.21493-12-jgross@suse.com
Signed-off-by: Borislav Petkov <bp@suse.de>

x86/mtrr: Disentangle MTRR init from PAT init

Add a main cache_cpu_init() init routine which initializes MTRR and/or
PAT support depending on what has been detected on the system.

Leave the MTRR-specific initialization in a MTRR-specific init function
where the smp_changes_mask setting happens now with caches disabled.

This global mask update was done with caches enabled before probably
because atomic operations while running uncached might have been quite
expensive.

But since only systems with a broken BIOS should ever require to set any
bit in smp_changes_mask, hurting those devices with a penalty of a few
microseconds during boot shouldn't be a real issue.

Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20221102074713.21493-8-jgross@suse.com
Signed-off-by: Borislav Petkov <bp@suse.de>

x86/mtrr: Rename prepare_set() and post_set()

Rename the currently MTRR-specific functions prepare_set() and
post_set() in preparation to move them. Make them non-static and put
their prototypes into cacheinfo.h, where they will end after moving them
to their final position anyway.

Expand the comment before the functions with an introductory line and
rename two related static variables, too.

[ bp: Massage commit message. ]

Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20221102074713.21493-5-jgross@suse.com
Signed-off-by: Borislav Petkov <bp@suse.de>

x86/mtrr: Replace use_intel() with a local flag

In MTRR code use_intel() is only used in one source file, and the
relevant use_intel_if member of struct mtrr_ops is set only in
generic_mtrr_ops.

Replace use_intel() with a single flag in cacheinfo.c which can be
set when assigning generic_mtrr_ops to mtrr_if. This allows to drop
use_intel_if from mtrr_ops, while preparing to decouple PAT from MTRR.
As another preparation for the PAT/MTRR decoupling use a bit for MTRR
control and one for PAT control. For now set both bits together, this
can be changed later.

As the new flag will be set only if mtrr_enabled is set, the test for
mtrr_enabled can be dropped at some places.

[ bp: Massage commit message. ]

Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20221102074713.21493-4-jgross@suse.com
Signed-off-by: Borislav Petkov <bp@suse.de>

x86/CPU/AMD: Save AMD NodeId as cpu_die_id

AMD systems provide a "NodeId" value that represents a global ID
indicating to which "Node" a logical CPU belongs. The "Node" is a
physical structure equivalent to a Die, and it should not be confused
with logical structures like NUMA nodes. Logical nodes can be adjusted
based on firmware or other settings whereas the physical nodes/dies are
fixed based on hardware topology.

The NodeId value can be used when a physical ID is needed by software.

Save the AMD NodeId to struct cpuinfo_x86.cpu_die_id. Use the value
from CPUID or MSR as appropriate. Default to phys_proc_id otherwise.
Do so for both AMD and Hygon systems.

Drop the node_id parameter from cacheinfo_*_init_llc_id() as it is no
longer needed.

Update the x86 topology documentation.

Suggested-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20201109210659.754018-2-Yazen.Ghannam@amd.com

x86/cpu: Get cache info and setup cache cpumap for Hygon Dhyana

The Hygon Dhyana CPU has a topology extensions bit in CPUID. With
this bit, the kernel can get the cache information. So add support in
cpuid4_cache_lookup_regs() to get the correct cache size.

The Hygon Dhyana CPU also discovers num_cache_leaves via CPUID leaf
0x8000001d, so add support to it in find_num_cache_leaves().

Also add cacheinfo_hygon_init_llc_id() and init_hygon_cacheinfo()
functions to initialize Dhyana cache info. Setup cache cpumap in the
same way as AMD does.

Signed-off-by: Pu Wen <puwen@hygon.cn>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Borislav Petkov <bp@suse.de>
Cc: bp@alien8.de
Cc: tglx@linutronix.de
Cc: mingo@redhat.com
Cc: hpa@zytor.com
Cc: x86@kernel.org
Cc: thomas.lendacky@amd.com
Link: https://lkml.kernel.org/r/2a686b2ac0e2f5a1f2f5f101124d9dd44f949731.1537533369.git.puwen@hygon.cn

x86/CPU/AMD: Calculate last level cache ID from number of sharing threads

Last Level Cache ID can be calculated from the number of threads sharing
the cache, which is available from CPUID Fn0x8000001D (Cache Properties).
This is used to left-shift the APIC ID to derive LLC ID.

Therefore, default to this method unless the APIC ID enumeration does not
follow the scheme.

Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1524864877-111962-5-git-send-email-suravee.suthikulpanit@amd.com