x86/vdso: Move VDSO image init to vdso2c generated code

Generate an init function for each VDSO image, replacing init_vdso() and
sysenter_setup().

Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20230124184019.26850-1-brgerst@gmail.com

x86/vdso: Use proper modifier for len's format specifier in extract()

Commit

8382c668ce4f ("x86/vdso: Add support for exception fixup in vDSO functions")

prints length "len" which is size_t.

Compilers now complain when building on a 32-bit host:

HOSTCC arch/x86/entry/vdso/vdso2c
...
In file included from arch/x86/entry/vdso/vdso2c.c:162:
arch/x86/entry/vdso/vdso2c.h: In function 'extract64':
arch/x86/entry/vdso/vdso2c.h:38:52: warning: format '%lu' expects argument of \
type 'long unsigned int', but argument 4 has type 'size_t' {aka 'unsigned int'}

So use proper modifier (%zu) for size_t.

[ bp: Massage commit message. ]

Fixes: 8382c668ce4f ("x86/vdso: Add support for exception fixup in vDSO functions")
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Jarkko Sakkinen <jarkko@kernel.org>
Link: https://lkml.kernel.org/r/20210303064357.17056-1-jslaby@suse.cz

x86/vdso: Add support for exception fixup in vDSO functions

Signals are a horrid little mechanism. They are especially nasty in
multi-threaded environments because signal state like handlers is global
across the entire process. But, signals are basically the only way that
userspace can “gracefully” handle and recover from exceptions.

The kernel generally does not like exceptions to occur during execution.
But, exceptions are a fact of life and must be handled in some
circumstances. The kernel handles them by keeping a list of individual
instructions which may cause exceptions. Instead of truly handling the
exception and returning to the instruction that caused it, the kernel
instead restarts execution at a *different* instruction. This makes it
obvious to that thread of execution that the exception occurred and lets
*that* code handle the exception instead of the handler.

This is not dissimilar to the try/catch exceptions mechanisms that some
programming languages have, but applied *very* surgically to single
instructions. It effectively changes the visible architecture of the
instruction.

Problem
=======

SGX generates a lot of signals, and the code to enter and exit enclaves and
muck with signal handling is truly horrid. At the same time, an approach
like kernel exception fixup can not be easily applied to userspace
instructions because it changes the visible instruction architecture.

Solution
========

The vDSO is a special page of kernel-provided instructions that run in
userspace. Any userspace calling into the vDSO knows that it is special.
This allows the kernel a place to legitimately rewrite the user/kernel
contract and change instruction behavior.

Add support for fixing up exceptions that occur while executing in the
vDSO. This replaces what could traditionally only be done with signal
handling.

This new mechanism will be used to replace previously direct use of SGX
instructions by userspace.

Just introduce the vDSO infrastructure. Later patches will actually
replace signal generation with vDSO exception fixup.

Suggested-by: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Jethro Beekman <jethro@fortanix.com>
Link: https://lkml.kernel.org/r/20201112220135.165028-17-jarkko@kernel.org

x86/vdso/vdso2c: Convert iterators to unsigned

`i` and `j` are used everywhere with unsigned types.

Convert `i` to unsigned long in order to avoid signed to unsigned
comparisons. Convert `k` to unsigned int with the same purpose.
Also, drop `j` as `i` could be used in place of it.
Introduce syms_nr for readability.

Co-developed-by: Andrei Vagin <avagin@openvz.org>
Signed-off-by: Andrei Vagin <avagin@openvz.org>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Andy Lutomirski <luto@kernel.org>
Link: https://lkml.kernel.org/r/20200420183256.660371-4-dima@arista.com

x86/vdso: Rename variable to fix -Wshadow warning

The go32() and go64() functions has an argument and a local variable called ‘name’.
Rename both to clarify the code and to fix a warning with -Wshadow.

Signed-off-by: Leonardo Brás <leobras.c@gmail.com>
Acked-by: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: David.Laight@aculab.com
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Michal Marek <michal.lkml@markovi.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: helen@koikeco.de
Cc: linux-kbuild@vger.kernel.org
Cc: lkcamp@lists.libreplanetbr.org
Link: http://lkml.kernel.org/r/20181023011022.GA6574@WindFlash
Signed-off-by: Ingo Molnar <mingo@kernel.org>

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.

For non */uapi/* files that summary was:

SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139

and resulted in the first patch in this series.

If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:

SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930

and resulted in the second patch in this series.

- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:

SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1

and that resulted in the third patch in this series.

- when the two scanners agreed on the detected license(s), that became
the concluded license(s).

- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.

- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).

- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.

- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct

This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/vdso: Fix building on big endian host

We need to call GET_LE to read hdr->e_type.

Fixes: 57f90c3dfc75 ("x86/vdso: Error out if the vDSO isn't a valid DSO")
Reported-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Segher Boessenkool <segher@kernel.crashing.org>
Acked-by: Andy Lutomirski <luto@kernel.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: linux-next@vger.kernel.org
Link: http://lkml.kernel.org/r/20160929193442.GA16617@gate.crashing.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

x86/vdso: Error out if the vDSO isn't a valid DSO

Some distros has been playing with toolchain changes that can affect
the type of ELF objects built. Occasionally, this goes wrong and
the vDSO ends up not being a DSO at all. This causes the kernel to
end up broken in a surprisingly subtle way -- glibc apparently
silently ignores a vDSO that isn't a DSO, so everything works,
albeit slowly, until users try a different libc implementation.

Make the kernel build process a bit more robust: fail outright if
the vDSO isn't ET_DYN or is missing its PT_DYNAMIC segment. I've
never seen this in an unmodified kernel.

See: https://github.com/docker/docker/issues/23378

Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/8a30e0a07c3b47ff917a8daa2df5e407cc0c6698.1468878336.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>

x86/vdso: Mark the vDSO code read-only after init

The vDSO does not need to be writable after __init, so mark it as
__ro_after_init. The result kills the exploit method of writing to the
vDSO from kernel space resulting in userspace executing the modified code,
as shown here to bypass SMEP restrictions: http://itszn.com/blog/?p=21

The memory map (with added vDSO address reporting) shows the vDSO moving
into read-only memory:

Before:
[ 0.143067] vDSO @ ffffffff82004000
[ 0.143551] vDSO @ ffffffff82006000
---[ High Kernel Mapping ]---
0xffffffff80000000-0xffffffff81000000 16M pmd
0xffffffff81000000-0xffffffff81800000 8M ro PSE GLB x pmd
0xffffffff81800000-0xffffffff819f3000 1996K ro GLB x pte
0xffffffff819f3000-0xffffffff81a00000 52K ro NX pte
0xffffffff81a00000-0xffffffff81e00000 4M ro PSE GLB NX pmd
0xffffffff81e00000-0xffffffff81e05000 20K ro GLB NX pte
0xffffffff81e05000-0xffffffff82000000 2028K ro NX pte
0xffffffff82000000-0xffffffff8214f000 1340K RW GLB NX pte
0xffffffff8214f000-0xffffffff82281000 1224K RW NX pte
0xffffffff82281000-0xffffffff82400000 1532K RW GLB NX pte
0xffffffff82400000-0xffffffff83200000 14M RW PSE GLB NX pmd
0xffffffff83200000-0xffffffffc0000000 974M pmd

After:
[ 0.145062] vDSO @ ffffffff81da1000
[ 0.146057] vDSO @ ffffffff81da4000
---[ High Kernel Mapping ]---
0xffffffff80000000-0xffffffff81000000 16M pmd
0xffffffff81000000-0xffffffff81800000 8M ro PSE GLB x pmd
0xffffffff81800000-0xffffffff819f3000 1996K ro GLB x pte
0xffffffff819f3000-0xffffffff81a00000 52K ro NX pte
0xffffffff81a00000-0xffffffff81e00000 4M ro PSE GLB NX pmd
0xffffffff81e00000-0xffffffff81e0b000 44K ro GLB NX pte
0xffffffff81e0b000-0xffffffff82000000 2004K ro NX pte
0xffffffff82000000-0xffffffff8214c000 1328K RW GLB NX pte
0xffffffff8214c000-0xffffffff8227e000 1224K RW NX pte
0xffffffff8227e000-0xffffffff82400000 1544K RW GLB NX pte
0xffffffff82400000-0xffffffff83200000 14M RW PSE GLB NX pmd
0xffffffff83200000-0xffffffffc0000000 974M pmd

Based on work by PaX Team and Brad Spengler.

Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Andy Lutomirski <luto@kernel.org>
Acked-by: H. Peter Anvin <hpa@linux.intel.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brad Spengler <spender@grsecurity.net>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: David Brown <david.brown@linaro.org>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Emese Revfy <re.emese@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mathias Krause <minipli@googlemail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: PaX Team <pageexec@freemail.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: kernel-hardening@lists.openwall.com
Cc: linux-arch <linux-arch@vger.kernel.org>
Link: http://lkml.kernel.org/r/1455748879-21872-7-git-send-email-keescook@chromium.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>

x86/vdso: Use .fault for the vDSO text mapping

The old scheme for mapping the vDSO text is rather complicated.
vdso2c generates a struct vm_special_mapping and a blank .pages
array of the correct size for each vdso image. Init code in
vdso/vma.c populates the .pages array for each vDSO image, and
the mapping code selects the appropriate struct
vm_special_mapping.

With .fault, we can use a less roundabout approach: vdso_fault()
just returns the appropriate page for the selected vDSO image.

Signed-off-by: Andy Lutomirski <luto@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Casasnovas <quentin.casasnovas@oracle.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/f886954c186bafd74e1b967c8931d852ae199aa2.1451446564.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>

x86/asm/entry, x86/vdso: Move the vDSO code to arch/x86/entry/vdso/

Cc: Borislav Petkov <bp@alien8.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>