kernel: Drop non-standard GNU inline assignment syntax

* We needed this previously due to our gcc2 compiled kernel.
* Now that our kernel is always latest gcc, we can move to the
c++20 syntax for inline assignment.
* Improves compatibility with clang, less GNU-specific stuff

Change-Id: Ib7272a0a52554a31e9a0e788fd3f031db9049795
Reviewed-on: https://review.haiku-os.org/c/haiku/+/5898
Reviewed-by: Alex von Gluck IV <kallisti5@unixzen.com>
Reviewed-by: Adrien Destugues <pulkomandy@pulkomandy.tk>

Converted the promise_tx2 driver to the device manager.

* This is part of ticket #9087. I have not added it to the image yet, before
it's getting tested, though.

Set B_DMA_HIGH_ADDRESS to 4 GB in the ATA/IDE modules.


git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@37227 a95241bf-73f2-0310-859d-f6bbb57e9c96

I am trying to help a bit with the transition from IDE to ATA stack.
* Copied ide_adapter.h as ata_adapter.h in attempt to further
separate the two stacks.
* Continued renaming stuff in drivers/bus/ATA.h
* Make all the busses/ata drivers include the new headers,
specifically ata_types.h, ata_adapter.h and bus/ATA.h,
they were all including ide_types and bus/IDE.h still
* Some renaming of global variables for coding style consistency
* Removed the promise driver from the build, it's not used on the
image and I don't believe it compiled even for the old IDE stack.
* There is no more Command Queueing in the new ATA stack, so I
removed the capability indication from the busses/ata drivers
and ata_adapter.h.

The new ATA stack still boots fine on my computer and I proof-read
the diff like two times. Basically, this was a careful search&replace
job only. The only things I am not sure about is renaming some
publishing related strings, but it seems to all work fine.


git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@30700 a95241bf-73f2-0310-859d-f6bbb57e9c96

* Change the drivers that use the ATA stack (ata_adapter) to publish
themselves in busses/ata instead of busses/ide.
* Re-introduce Francois change to install these drivers in busses/ata
when building with HAIKU_ATA_STACK = 1.
* Adopted the device manager to look for drivers in busses/ata
additionally to busses/ide.

This change works fine with a clean installation on a computer where I can
(and indeed have to) use the new ATA stack.


git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@30695 a95241bf-73f2-0310-859d-f6bbb57e9c96

modified interrupt handling to fit ata_adapter


git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@30493 a95241bf-73f2-0310-859d-f6bbb57e9c96

Copy ide busses into new ata busses folder, so they can be modified without breaking ide.


git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@30486 a95241bf-73f2-0310-859d-f6bbb57e9c96

Converted the promise_tx2 driver to the device manager.

* This is part of ticket #9087. I have not added it to the image yet, before
it's getting tested, though.

Set B_DMA_HIGH_ADDRESS to 4 GB in the ATA/IDE modules.


git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@37227 a95241bf-73f2-0310-859d-f6bbb57e9c96

I am trying to help a bit with the transition from IDE to ATA stack.
* Copied ide_adapter.h as ata_adapter.h in attempt to further
separate the two stacks.
* Continued renaming stuff in drivers/bus/ATA.h
* Make all the busses/ata drivers include the new headers,
specifically ata_types.h, ata_adapter.h and bus/ATA.h,
they were all including ide_types and bus/IDE.h still
* Some renaming of global variables for coding style consistency
* Removed the promise driver from the build, it's not used on the
image and I don't believe it compiled even for the old IDE stack.
* There is no more Command Queueing in the new ATA stack, so I
removed the capability indication from the busses/ata drivers
and ata_adapter.h.

The new ATA stack still boots fine on my computer and I proof-read
the diff like two times. Basically, this was a careful search&replace
job only. The only things I am not sure about is renaming some
publishing related strings, but it seems to all work fine.


git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@30700 a95241bf-73f2-0310-859d-f6bbb57e9c96

* Change the drivers that use the ATA stack (ata_adapter) to publish
themselves in busses/ata instead of busses/ide.
* Re-introduce Francois change to install these drivers in busses/ata
when building with HAIKU_ATA_STACK = 1.
* Adopted the device manager to look for drivers in busses/ata
additionally to busses/ide.

This change works fine with a clean installation on a computer where I can
(and indeed have to) use the new ATA stack.


git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@30695 a95241bf-73f2-0310-859d-f6bbb57e9c96

modified interrupt handling to fit ata_adapter


git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@30493 a95241bf-73f2-0310-859d-f6bbb57e9c96

Copy ide busses into new ata busses folder, so they can be modified without breaking ide.


git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@30486 a95241bf-73f2-0310-859d-f6bbb57e9c96