pmap: Convert boolean_t to bool.

Reviewed by: kib (older version)
Differential Revision: https://reviews.freebsd.org/D39921

sys: Remove $FreeBSD$: two-line .h pattern

Remove /^\s*\*\n \*\s+\$FreeBSD\$$\n/

spdx: The BSD-2-Clause-FreeBSD identifier is obsolete, drop -FreeBSD

The SPDX folks have obsoleted the BSD-2-Clause-FreeBSD identifier. Catch
up to that fact and revert to their recommended match of BSD-2-Clause.

Discussed with: pfg
MFC After: 3 days
Sponsored by: Netflix

pmap_unmapdev/bios: Accept a pointer instead of a vm_offset_t.

This matches the return type of pmap_mapdev/bios.

Reviewed by: kib, markj
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D36548

minidump: Use the provided dump bitset

When constructing the set of dumpable pages, use the bitset provided by
the state argument, rather than assuming vm_page_dump invariably. For
normal kernel minidumps this will be a pointer to vm_page_dump, but when
dumping the live system it will not.

To do this, the functions in vm_dumpset.h are extended to accept the
desired bitset as an argument. Note that this provided bitset is assumed
to be derived from vm_page_dump, and therefore has the same size.

Reviewed by: kib, markj, jhb
MFC after: 2 weeks
Sponsored by: Juniper Networks, Inc.
Sponsored by: Klara, Inc.
Differential Revision: https://reviews.freebsd.org/D31992

powerpc: clean up empty lines in .c and .h files

powerpc: Use IFUNCs for copyin/copyout/etc

Summary:
Radix on AIM, and all of Book-E (currently), can do direct addressing of
user space, instead of needing to map user addresses into kernel space.
Take advantage of this to optimize the copy(9) functions for this
behavior, and avoid effectively NOP translations.

Test Plan: Tested on powerpcspe, powerpc64/booke, powerpc64/AIM

Reviewed by: bdragon
Differential Revision: https://reviews.freebsd.org/D25129

powerpc/mmu: Convert PowerPC pmap drivers to ifunc from kobj

With IFUNC support in the kernel, we can finally get rid of our poor-man's
ifunc for pmap, utilizing kobj. Since moea64 uses a second tier kobj as
well, for its own private methods, this adds a second pmap install function
(pmap_mmu_init()) to perform pmap 'post-install pre-bootstrap'
initialization, before the IFUNCs get initialized.

Reviewed by: bdragon

powerpc64: Implement Radix MMU for POWER9 CPUs

Summary:
POWER9 supports two MMU formats: traditional hashed page tables, and Radix
page tables, similar to what's presesnt on most other architectures. The
PowerISA also specifies a process table -- a table of page table pointers--
which on the POWER9 is only available with the Radix MMU, so we can take
advantage of it with the Radix MMU driver.

Written by Matt Macy.

Differential Revision: https://reviews.freebsd.org/D19516

powerpc: Remove now-obsolete P9H MMU name

Split the PowerISA 3.0 HPT implementation from historic

PowerISA 3.0 makes several changes to not only the format of the HPT but
also the behavior surrounding it. For instance, TLBIE no longer requires
serialization. Removing this lock cuts buildworld time in half on a
18-core/72-thread POWER9 system, demonstrating that this lock is highly
contended on such a system.

There was odd behavior observed trying to make this change in a
backwards-compatible manner in moea64_native.c, so the best option was to
fully split it, and largely revert the original changes adding POWER9
support to the original file.

Suggested by: nwhitehorn

sys/powerpc: further adoption of SPDX licensing ID tags.

Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.

The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.

A new jail(8) with a configuration file, to replace the work currently done
by /etc/rc.d/jail.

Introduce inheritance into the PowerPC MMU kobj interface.

include/mmuvar.h - Change the MMU_DEF macro to also create the class
definition as well as define the DATA_SET. Add a macro, MMU_DEF_INHERIT,
which has an extra parameter specifying the MMU class to inherit methods
from. Update the comments at the start of the header file to describe the
new macros.

booke/pmap.c
aim/mmu_oea.c
aim/mmu_oea64.c - Collapse mmu_def_t declaration into updated MMU_DEF macro

The MMU_DEF_INHERIT macro will be used in the PS3 MMU implementation to
allow it to inherit the stock powerpc64 MMU methods.

Reviewed by: nwhitehorn

- Import the HEAD csup code which is the basis for the cvsmode work.

Initial support for Freescale PowerQUICC III MPC85xx system-on-chip family.

The PQ3 is a high performance integrated communications processing system
based on the e500 core, which is an embedded RISC processor that implements
the 32-bit Book E definition of the PowerPC architecture. For details refer
to: http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=MPC8555E

This port was tested and successfully run on the following members of the PQ3
family: MPC8533, MPC8541, MPC8548, MPC8555.

The following major integrated peripherals are supported:

* On-chip peripherals bus
* OpenPIC interrupt controller
* UART
* Ethernet (TSEC)
* Host/PCI bridge
* QUICC engine (SCC functionality)

This commit brings the main functionality and will be followed by individual
drivers that are logically separate from this base.

Approved by: cognet (mentor)
Obtained from: Juniper, Semihalf
MFp4: e500

Insert a layer of indirection to the pmap code, using a kobj for
the interface. This allows run-time selection of MMU code, based
on CPU-type detection, or tunable-overrides when testing new code.

Pre-requisite for G5 support.

conf/files.powerpc
- remove pmap.c
- add mmu_if.h, mmu_oea.c, pmap_dispatch.c

powerpc/include/mmuvar.h
- definitions for MMU implementations

powerpc/include/pmap.h
- remove pmap_pte_spill declaration
- add pmap_mmu_install declaration
- size the phys_avail array
- pmap_bootstrapped is now global-scope

powerpc/powerpc/machdep.c
- call kobj_machdep_init early in the boot sequence to allow
kobj usage prior to SI_SUB_LOCK
- install the OEA pmap code. This will be moved to CPU-specific
init code in the future.

powerpc/powerpc/mmu_if.m
- Kobj MMU interface definitions

powerpc/powerpc/pmap_dispatch.c
- central dispatch for pmap calls
- contains the global mmu kobj and the routine to locate the
the mmu implementation and init the kobj