History log of /freebsd-current/sys/netipsec/xform_tcp.c
Revision Date Author Comments
# 685dc743 16-Aug-2023 Warner Losh <imp@FreeBSD.org>

sys: Remove $FreeBSD$: one-line .c pattern

Remove /^[\s*]*__FBSDID\("\$FreeBSD\$"\);?\s*\n/


# 0fb0711d 21-Jun-2023 Michael Tuexen <tuexen@FreeBSD.org>

tcp: fix TCP MD5 digest computation for TCP over UDP

Skip the UDP header for the computation. This is similar to
skipping IPv6 extension headers.

Reviewed by: cc, rscheff
MFC after: 3 days
Sponsored by: Netflix, Inc.
Differential Revision: https://reviews.freebsd.org/D40596


# 53af6903 06-Oct-2022 Gleb Smirnoff <glebius@FreeBSD.org>

tcp: remove INP_TIMEWAIT flag

Mechanically cleanup INP_TIMEWAIT from the kernel sources. After
0d7445193ab, this commit shall not cause any functional changes.

Note: this flag was very often checked together with INP_DROPPED.
If we modify in_pcblookup*() not to return INP_DROPPED pcbs, we
will be able to remove most of this checks and turn them to
assertions. Some of them can be turned into assertions right now,
but that should be carefully done on a case by case basis.

Differential revision: https://reviews.freebsd.org/D36400


# eb18708e 08-Jan-2022 Robert Wing <rew@FreeBSD.org>

syncache: accept packet with no SA when TCP_MD5SIG is set

When TCP_MD5SIG is set on a socket, all packets are dropped that don't
contain an MD5 signature. Relax this behavior to accept a non-signed
packet when a security association doesn't exist with the peer.

This is useful when a listen socket set with TCP_MD5SIG wants to handle
connections protected with and without MD5 signatures.

Reviewed by: bz (previous version)
Sponsored by: nepustil.net
Sponsored by: Klara Inc.
Differential Revision: https://reviews.freebsd.org/D33227


# 91d38811 08-Jan-2022 Robert Wing <rew@FreeBSD.org>

tcpmd5: return ENOENT when security association not found

Return ENOENT from tcp_ipsec_input() when a security association is not
found. This allows callers of TCP_MD5_INPUT() to differentiate between a
security association not found and receiving a bad signature.

Also return ENOENT from tcp_ipsec_output() for consistency.

Reviewed by: ae
Sponsored by: nepustil.net
Sponsored by: Klara Inc.
Differential Revision: https://reviews.freebsd.org/D33226


# dae61c9d 25-Jun-2020 John Baldwin <jhb@FreeBSD.org>

Simplify IPsec transform-specific teardown.

- Rename from the teardown callback from 'zeroize' to 'cleanup' since
this no longer zeroes keys.

- Change the callback return type to void. Nothing checked the return
value and it was always zero.

- Don't have esp call into ah since it no longer needs to depend on
this to clear the auth key. Instead, both are now private and
self-contained.

Reviewed by: delphij
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D25443


# 20869b25 25-Jun-2020 John Baldwin <jhb@FreeBSD.org>

Use zfree() to explicitly zero IPsec keys.

Reviewed by: delphij
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D25442


# 968ac175 04-Jul-2018 Sean Bruno <sbruno@FreeBSD.org>

fix locking within tcp_ipsec_pcbctl() to match ipsec4_pcbctl(), ipsec4_pcbctl()

IPSEC_PCBCTL() functions, which include tcp_ipsec_pcbctl(),
ipsec4_pcbctl(), and ipsec6_pcbctl(), should all have matching locking
semantics.

ipsec4_pcbctl() and ipsec6_pcbctl() expect the inp to be unlocked on
entry and exit and appear to be correctly implemented as such. But
tcp_ipsec_pcbctl() had other semantics. This patch fixes the semantics
for tcp_ipsec_pcbctl().

Submitted by: Jason Eggleston <jason@eggnet.com>
MFH: 2 weeks
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D14623


# fe267a55 27-Nov-2017 Pedro F. Giffuni <pfg@FreeBSD.org>

sys: general adoption of SPDX licensing ID tags.

Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.

The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.

No functional change intended.


# cfff3743 10-Feb-2017 Gleb Smirnoff <glebius@FreeBSD.org>

Move tcp_fields_to_net() static inline into tcp_var.h, just below its
friend tcp_fields_to_host(). There is third party code that also uses
this inline.

Reviewed by: ae


# fcf59617 06-Feb-2017 Andrey V. Elsukov <ae@FreeBSD.org>

Merge projects/ipsec into head/.

Small summary
-------------

o Almost all IPsec releated code was moved into sys/netipsec.
o New kernel modules added: ipsec.ko and tcpmd5.ko. New kernel
option IPSEC_SUPPORT added. It enables support for loading
and unloading of ipsec.ko and tcpmd5.ko kernel modules.
o IPSEC_NAT_T option was removed. Now NAT-T support is enabled by
default. The UDP_ENCAP_ESPINUDP_NON_IKE encapsulation type
support was removed. Added TCP/UDP checksum handling for
inbound packets that were decapsulated by transport mode SAs.
setkey(8) modified to show run-time NAT-T configuration of SA.
o New network pseudo interface if_ipsec(4) added. For now it is
build as part of ipsec.ko module (or with IPSEC kernel).
It implements IPsec virtual tunnels to create route-based VPNs.
o The network stack now invokes IPsec functions using special
methods. The only one header file <netipsec/ipsec_support.h>
should be included to declare all the needed things to work
with IPsec.
o All IPsec protocols handlers (ESP/AH/IPCOMP protosw) were removed.
Now these protocols are handled directly via IPsec methods.
o TCP_SIGNATURE support was reworked to be more close to RFC.
o PF_KEY SADB was reworked:
- now all security associations stored in the single SPI namespace,
and all SAs MUST have unique SPI.
- several hash tables added to speed up lookups in SADB.
- SADB now uses rmlock to protect access, and concurrent threads
can do SA lookups in the same time.
- many PF_KEY message handlers were reworked to reflect changes
in SADB.
- SADB_UPDATE message was extended to support new PF_KEY headers:
SADB_X_EXT_NEW_ADDRESS_SRC and SADB_X_EXT_NEW_ADDRESS_DST. They
can be used by IKE daemon to change SA addresses.
o ipsecrequest and secpolicy structures were cardinally changed to
avoid locking protection for ipsecrequest. Now we support
only limited number (4) of bundled SAs, but they are supported
for both INET and INET6.
o INPCB security policy cache was introduced. Each PCB now caches
used security policies to avoid SP lookup for each packet.
o For inbound security policies added the mode, when the kernel does
check for full history of applied IPsec transforms.
o References counting rules for security policies and security
associations were changed. The proper SA locking added into xform
code.
o xform code was also changed. Now it is possible to unregister xforms.
tdb_xxx structures were changed and renamed to reflect changes in
SADB/SPDB, and changed rules for locking and refcounting.

Reviewed by: gnn, wblock
Obtained from: Yandex LLC
Relnotes: yes
Sponsored by: Yandex LLC
Differential Revision: https://reviews.freebsd.org/D9352


# 89856f7e 21-Jun-2016 Bjoern A. Zeeb <bz@FreeBSD.org>

Get closer to a VIMAGE network stack teardown from top to bottom rather
than removing the network interfaces first. This change is rather larger
and convoluted as the ordering requirements cannot be separated.

Move the pfil(9) framework to SI_SUB_PROTO_PFIL, move Firewalls and
related modules to their own SI_SUB_PROTO_FIREWALL.
Move initialization of "physical" interfaces to SI_SUB_DRIVERS,
move virtual (cloned) interfaces to SI_SUB_PSEUDO.
Move Multicast to SI_SUB_PROTO_MC.

Re-work parts of multicast initialisation and teardown, not taking the
huge amount of memory into account if used as a module yet.

For interface teardown we try to do as many of them as we can on
SI_SUB_INIT_IF, but for some this makes no sense, e.g., when tunnelling
over a higher layer protocol such as IP. In that case the interface
has to go along (or before) the higher layer protocol is shutdown.

Kernel hhooks need to go last on teardown as they may be used at various
higher layers and we cannot remove them before we cleaned up the higher
layers.

For interface teardown there are multiple paths:
(a) a cloned interface is destroyed (inside a VIMAGE or in the base system),
(b) any interface is moved from a virtual network stack to a different
network stack ("vmove"), or (c) a virtual network stack is being shut down.
All code paths go through if_detach_internal() where we, depending on the
vmove flag or the vnet state, make a decision on how much to shut down;
in case we are destroying a VNET the individual protocol layers will
cleanup their own parts thus we cannot do so again for each interface as
we end up with, e.g., double-frees, destroying locks twice or acquiring
already destroyed locks.
When calling into protocol cleanups we equally have to tell them
whether they need to detach upper layer protocols ("ulp") or not
(e.g., in6_ifdetach()).

Provide or enahnce helper functions to do proper cleanup at a protocol
rather than at an interface level.

Approved by: re (hrs)
Obtained from: projects/vnet
Reviewed by: gnn, jhb
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D6747


# 1f12da0e 22-Jan-2016 Bjoern A. Zeeb <bz@FreeBSD.org>

Just checkpoint the WIP in order to be able to make the tree update
easier. Note: this is currently not in a usable state as certain
teardown parts are not called and the DOMAIN rework is missing.
More to come soon and find its way to head.

Obtained from: P4 //depot/user/bz/vimage/...
Sponsored by: The FreeBSD Foundation


# 2d957916 01-Dec-2014 Andrey V. Elsukov <ae@FreeBSD.org>

Remove route chaching support from ipsec code. It isn't used for some time.
* remove sa_route_union declaration and route_cache member from struct secashead;
* remove key_sa_routechange() call from ICMP and ICMPv6 code;
* simplify ip_ipsec_mtu();
* remove #include <net/route.h>;

Sponsored by: Yandex LLC


# a7d5f7eb 19-Oct-2010 Jamie Gritton <jamie@FreeBSD.org>

A new jail(8) with a configuration file, to replace the work currently done
by /etc/rc.d/jail.


# 530c0060 01-Aug-2009 Robert Watson <rwatson@FreeBSD.org>

Merge the remainder of kern_vimage.c and vimage.h into vnet.c and
vnet.h, we now use jails (rather than vimages) as the abstraction
for virtualization management, and what remained was specific to
virtual network stacks. Minor cleanups are done in the process,
and comments updated to reflect these changes.

Reviewed by: bz
Approved by: re (vimage blanket)


# eddfbb76 14-Jul-2009 Robert Watson <rwatson@FreeBSD.org>

Build on Jeff Roberson's linker-set based dynamic per-CPU allocator
(DPCPU), as suggested by Peter Wemm, and implement a new per-virtual
network stack memory allocator. Modify vnet to use the allocator
instead of monolithic global container structures (vinet, ...). This
change solves many binary compatibility problems associated with
VIMAGE, and restores ELF symbols for virtualized global variables.

Each virtualized global variable exists as a "reference copy", and also
once per virtual network stack. Virtualized global variables are
tagged at compile-time, placing the in a special linker set, which is
loaded into a contiguous region of kernel memory. Virtualized global
variables in the base kernel are linked as normal, but those in modules
are copied and relocated to a reserved portion of the kernel's vnet
region with the help of a the kernel linker.

Virtualized global variables exist in per-vnet memory set up when the
network stack instance is created, and are initialized statically from
the reference copy. Run-time access occurs via an accessor macro, which
converts from the current vnet and requested symbol to a per-vnet
address. When "options VIMAGE" is not compiled into the kernel, normal
global ELF symbols will be used instead and indirection is avoided.

This change restores static initialization for network stack global
variables, restores support for non-global symbols and types, eliminates
the need for many subsystem constructors, eliminates large per-subsystem
structures that caused many binary compatibility issues both for
monitoring applications (netstat) and kernel modules, removes the
per-function INIT_VNET_*() macros throughout the stack, eliminates the
need for vnet_symmap ksym(2) munging, and eliminates duplicate
definitions of virtualized globals under VIMAGE_GLOBALS.

Bump __FreeBSD_version and update UPDATING.

Portions submitted by: bz
Reviewed by: bz, zec
Discussed with: gnn, jamie, jeff, jhb, julian, sam
Suggested by: peter
Approved by: re (kensmith)


# 7654a365 16-Jun-2009 Bjoern A. Zeeb <bz@FreeBSD.org>

Add the explicit include of vimage.h to another five .c files still
missing it.

Remove the "hidden" kernel only include of vimage.h from ip_var.h added
with the very first Vimage commit r181803 to avoid further kernel poisoning.


# 21ca7b57 05-May-2009 Marko Zec <zec@FreeBSD.org>

Change the curvnet variable from a global const struct vnet *,
previously always pointing to the default vnet context, to a
dynamically changing thread-local one. The currvnet context
should be set on entry to networking code via CURVNET_SET() macros,
and reverted to previous state via CURVNET_RESTORE(). Recursions
on curvnet are permitted, though strongly discuouraged.

This change should have no functional impact on nooptions VIMAGE
kernel builds, where CURVNET_* macros expand to whitespace.

The curthread->td_vnet (aka curvnet) variable's purpose is to be an
indicator of the vnet context in which the current network-related
operation takes place, in case we cannot deduce the current vnet
context from any other source, such as by looking at mbuf's
m->m_pkthdr.rcvif->if_vnet, sockets's so->so_vnet etc. Moreover, so
far curvnet has turned out to be an invaluable consistency checking
aid: it helps to catch cases when sockets, ifnets or any other
vnet-aware structures may have leaked from one vnet to another.

The exact placement of the CURVNET_SET() / CURVNET_RESTORE() macros
was a result of an empirical iterative process, whith an aim to
reduce recursions on CURVNET_SET() to a minimum, while still reducing
the scope of CURVNET_SET() to networking only operations - the
alternative would be calling CURVNET_SET() on each system call entry.
In general, curvnet has to be set in three typicall cases: when
processing socket-related requests from userspace or from within the
kernel; when processing inbound traffic flowing from device drivers
to upper layers of the networking stack, and when executing
timer-driven networking functions.

This change also introduces a DDB subcommand to show the list of all
vnet instances.

Approved by: julian (mentor)


# d7f03759 19-Oct-2008 Ulf Lilleengen <lulf@FreeBSD.org>

- Import the HEAD csup code which is the basis for the cvsmode work.


# 3e43d2ae 21-Mar-2008 Bjoern A. Zeeb <bz@FreeBSD.org>

Add ';' missed with the SYSINIT changes.
Not noticed by tb as TCP_SIGNATURE is not in LINT.

MFC after: 1 month


# a0196c3c 25-Mar-2006 George V. Neville-Neil <gnn@FreeBSD.org>

First steps towards IPSec cleanup.

Make the kernel side of FAST_IPSEC not depend on the shared
structures defined in /usr/include/net/pfkeyv2.h The kernel now
defines all the necessary in kernel structures in sys/netipsec/keydb.h
and does the proper massaging when moving messages around.

Sponsored By: Secure Computing


# c398230b 06-Jan-2005 Warner Losh <imp@FreeBSD.org>

/* -> /*- for license, minor formatting changes


# 3a2366dc 20-Apr-2004 Bruce M Simpson <bms@FreeBSD.org>

Fix a debugging printf snafu.


# 55d2c71b 02-Apr-2004 Bruce M Simpson <bms@FreeBSD.org>

This file was erroneously removed from HEAD when TCP-MD5 support was MFC'd;
correct this lameness.