sys: Remove ancient SCCS tags.

Remove ancient SCCS tags from the tree, automated scripting, with two
minor fixup to keep things compiling. All the common forms in the tree
were removed with a perl script.

Sponsored by: Netflix

sys: Remove $FreeBSD$: one-line .c pattern

Remove /^[\s*]*__FBSDID\("\$FreeBSD\$"\);?\s*\n/

net.inet6.ip6.log_interval: use ppsratecheck(9) internally

Reported by: mjg
Differential Revision: https://reviews.freebsd.org/D38758

netinet6: allow disabling excess log messages

RFC 4443 specifies cases where certain packets, like those originating from
local-scope addresses destined outside of the scope shouldn't be forwarded.
The current practice is to drop them, send ICMPv6 message where appropriate,
and log the message:

cannot forward src fe80:10::426:82ff:fe36:1d8, dst 2001:db8:db8::10, nxt
58, rcvif vlan5, outif vlan2

At times the volume of such messages cat get very high. Let's allow local
admins to disable such messages on per vnet basis, keeping the current
default (log).

Reported by: zarychtam@plan-b.pwste.edu.pl
Reviewed by: zlei (previous version), pauamma (docs)
Differential Revision: https://reviews.freebsd.org/D38644

IfAPI: Explicitly include <net/if_private.h> in netstack

Summary:
In preparation of making if_t completely opaque outside of the netstack,
explicitly include the header. <net/if_var.h> will stop including the
header in the future.

Sponsored by: Juniper Networks, Inc.
Reviewed by: glebius, melifaro
Differential Revision: https://reviews.freebsd.org/D38200

raw ip: fix regression with multicast and RSVP

With 61f7427f02a raw sockets protosw has wildcard pr_protocol. Protocol
of a specific pcb is stored in inp_ip_p.

Reviewed by: karels
Reported by: karels
Differential revision: https://reviews.freebsd.org/D36429
Fixes: 61f7427f02a307d28af674a12c45dd546e3898e4

ip6_mroute: Mark a variable only used in a debug trace as unused.

pim6_input: eliminate write only variable rc

Sponsored by: Netflix

ifnet_byindex() actually requires network epoch

Sweep over potentially unsafe calls to ifnet_byindex() and wrap them
in epoch. Most of the code touched remains unsafe, as the returned
pointer is being used after epoch exit. Mark that with a comment.

Validate the index argument inside the function, reducing argument
validation requirement from the callers and making V_if_index
private to if.c.

Reviewed by: melifaro
Differential revision: https://reviews.freebsd.org/D33263

ip6mrouter: Make the expiration callout MPSAFE

- Protect the `expire_upcalls` callout with the MFC6 mutex. The callout
handler needs this mutex anyway.
- Convert the MROUTER6 mutex to a sleepable sx lock. It is only used
when configuring the global v6 multicast routing socket, so is only
used in system call paths where sleeping is safe. This lets us drain
the callout without having to drop the lock.
- For all locking macros in the file, convert to using a _LOCKPTR macro.

Reported by: mav
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D31836

socket: Implement SO_RERROR

SO_RERROR indicates that receive buffer overflows should be handled as
errors. Historically receive buffer overflows have been ignored and
programs could not tell if they missed messages or messages had been
truncated because of overflows. Since programs historically do not
expect to get receive overflow errors, this behavior is not the
default.

This is really really important for programs that use route(4) to keep
in sync with the system. If we loose a message then we need to reload
the full system state, otherwise the behaviour from that point is
undefined and can lead to chasing bogus bug reports.

Reviewed by: philip (network), kbowling (transport), gbe (manpages)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D26652

Revert "SO_RERROR indicates that receive buffer overflows should be handled as errors."
Wrong version of the change was pushed inadvertenly.

This reverts commit 4a01b854ca5c2e5124958363b3326708b913af71.

SO_RERROR indicates that receive buffer overflows should be handled as errors.
Historically receive buffer overflows have been ignored and programs
could not tell if they missed messages or messages had been truncated
because of overflows. Since programs historically do not expect to get
receive overflow errors, this behavior is not the default.

This is really really important for programs that use route(4) to keep in sync
with the system. If we loose a message then we need to reload the full system
state, otherwise the behaviour from that point is undefined and can lead
to chasing bogus bug reports.

net: clean up empty lines in .c and .h files

Mark more nodes as CTLFLAG_MPSAFE or CTLFLAG_NEEDGIANT (17 of many)

r357614 added CTLFLAG_NEEDGIANT to make it easier to find nodes that are
still not MPSAFE (or already are but aren’t properly marked).
Use it in preparation for a general review of all nodes.

This is non-functional change that adds annotations to SYSCTL_NODE and
SYSCTL_PROC nodes using one of the soon-to-be-required flags.

Mark all obvious cases as MPSAFE. All entries that haven't been marked
as MPSAFE before are by default marked as NEEDGIANT

Approved by: kib (mentor, blanket)
Commented by: kib, gallatin, melifaro
Differential Revision: https://reviews.freebsd.org/D23718

Make ip6_output() and ip_output() require network epoch.

All callers that before may called into these functions
without network epoch now must enter it.

Unroll macro that is used just once. Not a functional change.

Fix m_pullup() problem after removing PULLDOWN_TESTs and KAME EXT_*macros.

r354748-354750 replaced the KAME macros with m_pulldown() calls.
Contrary to the rest of the network stack m_len checks before m_pulldown()
were not put in placed (see r354748).
Put these m_len checks in place for now (to go along with the style of the
network stack since the initial commits). These are not put in for
performance but to avoid an error scenario (even though it also will help
performance at the moment as it avoid allocating an extra mbuf; not because
of the unconditional function call).

The observed error case went like this:
(1) an mbuf with M_EXT arrives and we call m_pullup() unconditionally on it.
(2) m_pullup() will call m_get() unless the requested length is larger than
MHLEN (in which case it'll m_freem() the perfectly fine mbuf) and migrate the
requested length of data and pkthdr into the new mbuf.
(3) If m_get() succeeds, a further m_pullup() call going over MHLEN will fail.
This was observed with failing auto-configuration as an RA packet of
200 bytes exceeded MHLEN and the m_pullup() called from nd6_ra_input()
dropped the mbuf.
(Re-)adding the m_len checks before m_pullup() calls avoids this problems
with mbufs using external storage for now.

MFC after: 3 weeks
Sponsored by: Netflix

netinet6: Remove PULLDOWN_TESTs.

Remove the KAME introduced PULLDOWN_TESTs which did not even
have a compile-time option in sys/conf to turn them on for a
custom kernel build. They made the code a lot harder to read
or more complicated in a few cases.

Convert the IP6_EXTHDR_CHECK() calls into FreeBSD looking code.
Rather than throwing the packet away if it would not fit the
KAME mbuf expectations, convert the macros to m_pullup() calls.
Do not do any extra manual conditional checks upfront as to
whether the m_len would suffice (*), simply let m_pullup() do
its work (incl. an early check).

Remove extra m_pullup() calls where earlier in the function or
the only caller has already done the pullup.

Discussed with: rwatson (*)
Reviewed by: ae
MFC after: 8 weeks
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D22334

netinet*: variable cleanup

In preparation for another change factor out various variable cleanups.
These mainly include:
(1) do not assign values to variables during declaration: this makes
the code more readable and does allow for better grouping of
variable declarations,
(2) do not assign values to variables before need; e.g., if a variable
is only used in the 2nd half of a function and we have multiple
return paths before that, then do not set it before it is needed, and
(3) try to avoid assigning the same value multiple times.

MFC after: 3 weeks
Sponsored by: Netflix

Plug some networking sysctl leaks.

Various network protocol sysctl handlers were not zero-filling their
output buffers and thus would export uninitialized stack memory to
userland. Fix a number of such handlers.

Reported by: Thomas Barabosch, Fraunhofer FKIE
Reviewed by: tuexen
MFC after: 3 days
Security: kernel memory disclosure
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D18301

Use the new VNET_DEFINE_STATIC macro when we are defining static VNET
variables.

Reviewed by: bz
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D16147

Rework IP encapsulation handling code.

Currently it has several disadvantages:
- it uses single mutex to protect internal structures. It is used by
data- and control- path, thus there are no parallelism at all.
- it uses single list to keep encap handlers for both INET and INET6
families.
- struct encaptab keeps unneeded information (src, dst, masks, protosw),
that isn't used by code in the source tree.
- matches are prioritized and when many tunneling interfaces are
registered, encapcheck handler of each interface is invoked for each
packet. The search takes O(n) for n interfaces. All this work is done
with exclusive lock held.

What this patch includes:
- the datapath is converted to be lockless using epoch(9) KPI.
- struct encaptab now linked using CK_LIST.
- all unused fields removed from struct encaptab. Several new fields
addedr: min_length is the minimum packet length, that encapsulation
handler expects to see; exact_match is maximum number of bits, that
can return an encapsulation handler, when it wants to consume a packet.
- IPv6 and IPv4 handlers are stored in separate lists;
- added new "encap_lookup_t" method, that will be used later. It is
targeted to speedup lookup of needed interface, when gif(4)/gre(4) have
many interfaces.
- the need to use protosw structure is eliminated. The only pr_input
method was used from this structure, so I don't see the need to keep
using it.
- encap_input_t method changed to avoid using mbuf tags to store softc
pointer. Now it is passed directly trough encap_input_t method.
encap_getarg() funtions is removed.
- all sockaddr structures and code that uses them removed. We don't have
any code in the tree that uses them. All consumers use encap_attach_func()
method, that relies on invoking of encapcheck() to determine the needed
handler.
- introduced struct encap_config, it contains parameters of encap handler
that is going to be registered by encap_attach() function.
- encap handlers are stored in lists ordered by exact_match value, thus
handlers that need more bits to match will be checked first, and if
encapcheck method returns exact_match value, the search will be stopped.
- all current consumers changed to use new KPI.

Reviewed by: mmacy
Sponsored by: Yandex LLC
Differential Revision: https://reviews.freebsd.org/D15617

Merge r1.120 from NetBSD:
Fix a pretty simple, yet pretty tragic typo: we should return IPPROTO_DONE,
not IPPROTO_NONE. With IPPROTO_NONE we will keep parsing the header chain
on an mbuf that was already freed.

Reported by: Maxime Villard <max at m00nbsd dot net>
MFC after: 3 days

sys: further adoption of SPDX licensing ID tags.

Mainly focus on files that use BSD 3-Clause license.

The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.

Special thanks to Wind River for providing access to "The Duke of
Highlander" tool: an older (2014) run over FreeBSD tree was useful as a
starting point.

Renumber copyright clause 4

Renumber cluase 4 to 3, per what everybody else did when BSD granted
them permission to remove clause 3. My insistance on keeping the same
numbering for legal reasons is too pedantic, so give up on that point.

Submitted by: Jan Schaumann <jschauma@stevens.edu>
Pull Request: https://github.com/freebsd/freebsd/pull/96

Remove the 4.3BSD compatible macro m_copy(), use m_copym() instead.

Reviewed by: gnn
Differential Revision: https://reviews.freebsd.org/D7878

Get closer to a VIMAGE network stack teardown from top to bottom rather
than removing the network interfaces first. This change is rather larger
and convoluted as the ordering requirements cannot be separated.

Move the pfil(9) framework to SI_SUB_PROTO_PFIL, move Firewalls and
related modules to their own SI_SUB_PROTO_FIREWALL.
Move initialization of "physical" interfaces to SI_SUB_DRIVERS,
move virtual (cloned) interfaces to SI_SUB_PSEUDO.
Move Multicast to SI_SUB_PROTO_MC.

Re-work parts of multicast initialisation and teardown, not taking the
huge amount of memory into account if used as a module yet.

For interface teardown we try to do as many of them as we can on
SI_SUB_INIT_IF, but for some this makes no sense, e.g., when tunnelling
over a higher layer protocol such as IP. In that case the interface
has to go along (or before) the higher layer protocol is shutdown.

Kernel hhooks need to go last on teardown as they may be used at various
higher layers and we cannot remove them before we cleaned up the higher
layers.

For interface teardown there are multiple paths:
(a) a cloned interface is destroyed (inside a VIMAGE or in the base system),
(b) any interface is moved from a virtual network stack to a different
network stack ("vmove"), or (c) a virtual network stack is being shut down.
All code paths go through if_detach_internal() where we, depending on the
vmove flag or the vnet state, make a decision on how much to shut down;
in case we are destroying a VNET the individual protocol layers will
cleanup their own parts thus we cannot do so again for each interface as
we end up with, e.g., double-frees, destroying locks twice or acquiring
already destroyed locks.
When calling into protocol cleanups we equally have to tell them
whether they need to detach upper layer protocols ("ulp") or not
(e.g., in6_ifdetach()).

Provide or enahnce helper functions to do proper cleanup at a protocol
rather than at an interface level.

Approved by: re (hrs)
Obtained from: projects/vnet
Reviewed by: gnn, jhb
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D6747

Just checkpoint the WIP in order to be able to make the tree update
easier. Note: this is currently not in a usable state as certain
teardown parts are not called and the DOMAIN rework is missing.
More to come soon and find its way to head.

Obtained from: P4 //depot/user/bz/vimage/...
Sponsored by: The FreeBSD Foundation

Simplify ip[6] simploop:
Do not pass 'dst' sockaddr to ip[6]_mloopback:
- We have explicit check for AF_INET in ip_output()
- We assume ip header inside passed mbuf in ip_mloopback
- We assume ip6 header inside passed mbuf in ip6_mloopback

o Make net.inet6.ip6.mif6table return special API structure, that doesn't
contain kernel pointers, and instead has interface index.
Bump __FreeBSD_version for that change.
o Now, netstat/mroute6.c no longer needs to kvm_read(3) struct ifnet, and
no longer needs to include if_var.h

Note that this change is far from being a complete move of IPv6 multicast
routing to a proper API. Other structures are still dumped into their
sysctls as is, requiring userland application to #define _KERNEL when
including ip6_mroute.h and then call kvm_read(3) to gather all bits and
pieces. But fixing this is out of scope of the opaque ifnet project.

Sponsored by: Nginx, Inc.
Sponsored by: Netflix

Convert netinet6/ to use new routing API.

* Remove &ifpp from ip6_output() in favor of ri->ri_nh_info
* Provide different wrappers to in6_selectsrc:
Currently it is used by 2 differenct type of customers:
- socket-based one, which all are unsure about provided
address scope and
- in-kernel ones (ND code mostly), which don't have
any sockets, options, crededentials, etc.
So, we provide two different wrappers to in6_selectsrc()
returning select source.
* Make different versions of selectroute():
Currenly selectroute() is used in two scenarios:
- SAS, via in6_selecsrc() -> in6_selectif() -> selectroute()
- output, via in6_output -> wrapper -> selectroute()
Provide different versions for each customer:
- fib6_lookup_nh_basic()-based in6_selectif() which is
capable of returning interface only, without MTU/NHOP/L2
calculations
- full-blown fib6_selectroute() with cached route/multipath/
MTU/L2
* Stop using routing table for link-local address lookups
* Add in6_ifawithifp_lla() to make for-us check faster for link-local
* Add in6_splitscope / in6_setllascope for faster embed/deembed scopes

When deciding whether to call m_pullup() even though there is adequate
data in an mbuf, use M_WRITABLE() instead of a direct test of M_EXT;
the latter both unnecessarily exposes mbuf-allocator internals in the
protocol stack and is also insufficient to catch all cases of
non-writability.

(NB: m_pullup() does not actually guarantee that a writable mbuf is
returned, so further refinement of all of these code paths continues to
be required.)

Reviewed by: bz
MFC after: 3 days
Sponsored by: EMC / Isilon Storage Division
Differential Revision: https://reviews.freebsd.org/D900

Change pr_output's prototype to avoid the need for explicit casts.
This is a follow up to r269699.

Phabric: D564
Reviewed by: jhb

Merge 'struct ip6protosw' and 'struct protosw' into one. Now we have
only one protocol switch structure that is shared between ipv4 and ipv6.

Phabric: D476
Reviewed by: jhb

Only count table lookups when we're actually processing packets.

PR: 183462
Submitted by: Sven-Thorsten Dietrich <thebigcorporation at gmail.com>
Reviewed by: bms
MFC after: 1 month

For IPv6, return the same error code as IPv4 when mrouter is not initialized.

PR: 178472
Submitted by: Sven-Thorsten Dietrich <sven at vyatta.com>
Reviewed by: bms

Remove extra nesting from X_ip6_mforward() function.
Also remove disabled definitions from ip6_mroute.h.

PR: 185148
Sponsored by: Yandex LLC

Add MRT6_DLOG() macro for debugging.
Reduce number of MRT6DEBUG ifdefs and fix some broken format strings.

MFC after: 1 week
Sponsored by: Yandex LLC

- For kernel compiled only with KDTRACE_HOOKS and not any lock debugging
option, unbreak the lock tracing release semantic by embedding
calls to LOCKSTAT_PROFILE_RELEASE_LOCK() direclty in the inlined
version of the releasing functions for mutex, rwlock and sxlock.
Failing to do so skips the lockstat_probe_func invokation for
unlocking.
- As part of the LOCKSTAT support is inlined in mutex operation, for
kernel compiled without lock debugging options, potentially every
consumer must be compiled including opt_kdtrace.h.
Fix this by moving KDTRACE_HOOKS into opt_global.h and remove the
dependency by opt_kdtrace.h for all files, as now only KDTRACE_FRAMES
is linked there and it is only used as a compile-time stub [0].

[0] immediately shows some new bug as DTRACE-derived support for debug
in sfxge is broken and it was never really tested. As it was not
including correctly opt_kdtrace.h before it was never enabled so it
was kept broken for a while. Fix this by using a protection stub,
leaving sfxge driver authors the responsibility for fixing it
appropriately [1].

Sponsored by: EMC / Isilon storage division
Discussed with: rstone
[0] Reported by: rstone
[1] Discussed with: philip

The r48589 promised to remove implicit inclusion of if_var.h soon. Prepare
to this event, adding if_var.h to files that do need it. Also, include
all includes that now are included due to implicit pollution via if_var.h

Sponsored by: Netflix
Sponsored by: Nginx, Inc.

Fix mbuf leak.

Submitted by: Loganaden Velvindron <logan elandsys.com>
Obtained from: NetBSD
Approved by: re (kib)

Use an unsigned long when indexing into mfchashtbl[] and mf6ctable[]. This
matches the types used when computing hash indices and the type of the
maximum size of mfchashtbl[].

PR: kern/181821
Submitted by: Sven-Thorsten Dietrich <sven@vyatta.com> (IPv4)
MFC after: 1 week

Implement the ip, tcp, and udp DTrace providers. The probe definitions use
dynamic translation so that their arguments match the definitions for
these providers in Solaris and illumos. Thus, existing scripts for these
providers should work unmodified on FreeBSD.

Tested by: gnn, hiren
MFC after: 1 month

Add m_clrprotoflags() to clear protocol specific mbuf flags at up and
downwards layer crossings.

Consistently use it within IP, IPv6 and ethernet protocols.

Discussed with: trociny, glebius

- Use time_uptime instead of time_second in data structures for
PF_INET6 in kernel. This fixes various malfunction when the wall time
clock is changed. Bump __FreeBSD_version to 1000041.

- Use clock_gettime(CLOCK_MONOTONIC_FAST) in userland utilities.

MFC after: 1 month

Use PIM6STAT_INC() and MRT6STAT_INC() macros for IPv6 multicast
statistics accounting.

MFC after: 2 weeks

Use IP6STAT_INC/IP6STAT_DEC macros to update ip6 stats.

MFC after: 1 week

- Use m_getcl() instead of hand allocating.
- Use m_get()/m_gethdr() instead of macros.
- Remove superfluous cleaning of mbuf fields after allocation.

Sponsored by: Nginx, Inc.

Mechanically substitute flags from historic mbuf allocator with
malloc(9) flags within sys.

Exceptions:

- sys/contrib not touched
- sys/mbuf.h edited manually

Remove opt_inet.h, it isn't required here.

MFC after: 1 week

Revert previous commit...

Pointyhat to: kevlo (myself)

Prefer NULL over 0 for pointers

Remove route caching from IP multicast routing code. There is no
reason to do that, and also, cached route never got unreferenced,
which meant a reference leak.

Reviewed by: bms

o Convert IPv6 read-only stats sysctls to the read-write ones.
o Teach netstat(1) -z to reset these stats sysctls.

PR: bin/153206
Reviewed by: glebuis
Sponsored by: NGINX, Inc.
MFC after: 1 month

Mark all SYSCTL_NODEs static that have no corresponding SYSCTL_DECLs.

The SYSCTL_NODE macro defines a list that stores all child-elements of
that node. If there's no SYSCTL_DECL macro anywhere else, there's no
reason why it shouldn't be static.

After some off-list discussion, revert a number of changes to the
DPCPU_DEFINE and VNET_DEFINE macros, as these cause problems for various
people working on the affected files. A better long-term solution is
still being considered. This reversal may give some modules empty
set_pcpu or set_vnet sections, but these are harmless.

Changes reverted:

------------------------------------------------------------------------
r215318 | dim | 2010-11-14 21:40:55 +0100 (Sun, 14 Nov 2010) | 4 lines

Instead of unconditionally emitting .globl's for the __start_set_xxx and
__stop_set_xxx symbols, only emit them when the set_vnet or set_pcpu
sections are actually defined.

------------------------------------------------------------------------
r215317 | dim | 2010-11-14 21:38:11 +0100 (Sun, 14 Nov 2010) | 3 lines

Apply the STATIC_VNET_DEFINE and STATIC_DPCPU_DEFINE macros throughout
the tree.

------------------------------------------------------------------------
r215316 | dim | 2010-11-14 21:23:02 +0100 (Sun, 14 Nov 2010) | 2 lines

Add macros to define static instances of VNET_DEFINE and DPCPU_DEFINE.

Apply the STATIC_VNET_DEFINE and STATIC_DPCPU_DEFINE macros throughout
the tree.

A new jail(8) with a configuration file, to replace the work currently done
by /etc/rc.d/jail.

MFC r207369:
MFP4: @176978-176982, 176984, 176990-176994, 177441

"Whitspace" churn after the VIMAGE/VNET whirls.

Remove the need for some "init" functions within the network
stack, like pim6_init(), icmp_init() or significantly shorten
others like ip6_init() and nd6_init(), using static initialization
again where possible and formerly missed.

Move (most) variables back to the place they used to be before the
container structs and VIMAGE_GLOABLS (before r185088) and try to
reduce the diff to stable/7 and earlier as good as possible,
to help out-of-tree consumers to update from 6.x or 7.x to 8 or 9.

This also removes some header file pollution for putatively
static global variables.

Revert VIMAGE specific changes in ipfilter::ip_auth.c, that are
no longer needed.

Reviewed by: jhb
Discussed with: rwatson
Sponsored by: The FreeBSD Foundation
Sponsored by: CK Software GmbH

MFP4: @176978-176982, 176984, 176990-176994, 177441

"Whitspace" churn after the VIMAGE/VNET whirls.

Remove the need for some "init" functions within the network
stack, like pim6_init(), icmp_init() or significantly shorten
others like ip6_init() and nd6_init(), using static initialization
again where possible and formerly missed.

Move (most) variables back to the place they used to be before the
container structs and VIMAGE_GLOABLS (before r185088) and try to
reduce the diff to stable/7 and earlier as good as possible,
to help out-of-tree consumers to update from 6.x or 7.x to 8 or 9.

This also removes some header file pollution for putatively
static global variables.

Revert VIMAGE specific changes in ipfilter::ip_auth.c, that are
no longer needed.

Reviewed by: jhb
Discussed with: rwatson
Sponsored by: The FreeBSD Foundation
Sponsored by: CK Software GmbH
MFC after: 6 days

Merge the remainder of kern_vimage.c and vimage.h into vnet.c and
vnet.h, we now use jails (rather than vimages) as the abstraction
for virtualization management, and what remained was specific to
virtual network stacks. Minor cleanups are done in the process,
and comments updated to reflect these changes.

Reviewed by: bz
Approved by: re (vimage blanket)

Remove unused VNET_SET() and related macros; only VNET_GET() is
ever actually used. Rename VNET_GET() to VNET() to shorten
variable references.

Discussed with: bz, julian
Reviewed by: bz
Approved by: re (kensmith, kib)

Build on Jeff Roberson's linker-set based dynamic per-CPU allocator
(DPCPU), as suggested by Peter Wemm, and implement a new per-virtual
network stack memory allocator. Modify vnet to use the allocator
instead of monolithic global container structures (vinet, ...). This
change solves many binary compatibility problems associated with
VIMAGE, and restores ELF symbols for virtualized global variables.

Each virtualized global variable exists as a "reference copy", and also
once per virtual network stack. Virtualized global variables are
tagged at compile-time, placing the in a special linker set, which is
loaded into a contiguous region of kernel memory. Virtualized global
variables in the base kernel are linked as normal, but those in modules
are copied and relocated to a reserved portion of the kernel's vnet
region with the help of a the kernel linker.

Virtualized global variables exist in per-vnet memory set up when the
network stack instance is created, and are initialized statically from
the reference copy. Run-time access occurs via an accessor macro, which
converts from the current vnet and requested symbol to a per-vnet
address. When "options VIMAGE" is not compiled into the kernel, normal
global ELF symbols will be used instead and indirection is avoided.

This change restores static initialization for network stack global
variables, restores support for non-global symbols and types, eliminates
the need for many subsystem constructors, eliminates large per-subsystem
structures that caused many binary compatibility issues both for
monitoring applications (netstat) and kernel modules, removes the
per-function INIT_VNET_*() macros throughout the stack, eliminates the
need for vnet_symmap ksym(2) munging, and eliminates duplicate
definitions of virtualized globals under VIMAGE_GLOBALS.

Bump __FreeBSD_version and update UPDATING.

Portions submitted by: bz
Reviewed by: bz, zec
Discussed with: gnn, jamie, jeff, jhb, julian, sam
Suggested by: peter
Approved by: re (kensmith)

After cleaning up rt_tables from vnet.h and cleaning up opt_route.h
a lot of files no longer need route.h either. Garbage collect them.
While here remove now unneeded vnet.h #includes as well.

Switch cmd argument to u_long. This matches what if_ethersubr.c does and
allows the code to compile cleanly on amd64 with clang.

Reviewed by: rwatson
Approved by: ed (mentor)

After r193232 rt_tables in vnet.h are no longer indirectly dependent on
the ROUTETABLES kernel option thus there is no need to include opt_route.h
anymore in all consumers of vnet.h and no longer depend on it for module
builds.

Remove the hidden include in flowtable.h as well and leave the two
explicit #includes in ip_input.c and ip_output.c.

Add two missing INIT_VNET_INET6(curvnet) to make VIMAGE kernels happier.

Change the curvnet variable from a global const struct vnet *,
previously always pointing to the default vnet context, to a
dynamically changing thread-local one. The currvnet context
should be set on entry to networking code via CURVNET_SET() macros,
and reverted to previous state via CURVNET_RESTORE(). Recursions
on curvnet are permitted, though strongly discuouraged.

This change should have no functional impact on nooptions VIMAGE
kernel builds, where CURVNET_* macros expand to whitespace.

The curthread->td_vnet (aka curvnet) variable's purpose is to be an
indicator of the vnet context in which the current network-related
operation takes place, in case we cannot deduce the current vnet
context from any other source, such as by looking at mbuf's
m->m_pkthdr.rcvif->if_vnet, sockets's so->so_vnet etc. Moreover, so
far curvnet has turned out to be an invaluable consistency checking
aid: it helps to catch cases when sockets, ifnets or any other
vnet-aware structures may have leaked from one vnet to another.

The exact placement of the CURVNET_SET() / CURVNET_RESTORE() macros
was a result of an empirical iterative process, whith an aim to
reduce recursions on CURVNET_SET() to a minimum, while still reducing
the scope of CURVNET_SET() to networking only operations - the
alternative would be calling CURVNET_SET() on each system call entry.
In general, curvnet has to be set in three typicall cases: when
processing socket-related requests from userspace or from within the
kernel; when processing inbound traffic flowing from device drivers
to upper layers of the networking stack, and when executing
timer-driven networking functions.

This change also introduces a DDB subcommand to show the list of all
vnet instances.

Approved by: julian (mentor)

Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit:
import from p4 bms_netdev. Summary of changes:

* Connect netinet6/in6_mcast.c to build.
The legacy KAME KPIs are mostly preserved.
* Eliminate now dead code from ip6_output.c.
Don't do mbuf bingo, we are not going to do RFC 2292 style
CMSG tricks for multicast options as they are not required
by any current IPv6 normative reference.
* Refactor transports (UDP, raw_ip6) to do own mcast filtering.
SCTP, TCP unaffected by this change.
* Add ip6_msource, in6_msource structs to in6_var.h.
* Hookup mld_ifinfo state to in6_ifextra, allocate from
domifattach path.
* Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced.
Kernel consumers which need this should use in6m_lookup().
* Refactor IPv6 socket group memberships to use a vector (like IPv4).
* Update ifmcstat(8) for IPv6 SSM.
* Add witness lock order for IN6_MULTI_LOCK.
* Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths.
* Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup.
* Update carp(4) for new IPv6 SSM KPIs.
* Virtualize ip6_mrouter socket.
Changes mostly localized to IPv6 MROUTING.
* Don't do a local group lookup in MROUTING.
* Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge().
* Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode.
* Bump __FreeBSD_version to 800084.
* Update UPDATING.

NOTE WELL:
* This code hasn't been tested against real MLDv2 queriers
(yet), although the on-wire protocol has been verified in Wireshark.
* There are a few unresolved issues in the socket layer APIs to
do with scope ID propagation.
* There is a LOR present in ip6_output()'s use of
in6_setscope() which needs to be resolved. See comments in mld6.c.
This is believed to be benign and can't be avoided for the moment
without re-introducing an indirect netisr.

This work was mostly derived from the IGMPv3 implementation, and
has been sponsored by a third party.

Introduce a number of changes to the MROUTING code.
This is purely a forwarding plane cleanup; no control plane
code is involved.

Summary:
* Split IPv4 and IPv6 MROUTING support. The static compile-time
kernel option remains the same, however, the modules may now
be built for IPv4 and IPv6 separately as ip_mroute_mod and
ip6_mroute_mod.
* Clean up the IPv4 multicast forwarding code to use BSD queue
and hash table constructs. Don't build our own timer abstractions
when ratecheck() and timevalclear() etc will do.
* Expose the multicast forwarding cache (MFC) and virtual interface
table (VIF) as sysctls, to reduce netstat's dependence on libkvm
for this information for running kernels.
* bandwidth meters however still require libkvm.
* Make the MFC hash table size a boot/load-time tunable ULONG,
net.inet.ip.mfchashsize (defaults to 256).
* Remove unused members from struct vif and struct mfc.
* Kill RSVP support, as no current RSVP implementation uses it.
These stubs could be moved to raw_ip.c.
* Don't share locks or initialization between IPv4 and IPv6.
* Don't use a static struct route_in6 in ip6_mroute.c.
The v6 code is still using a cached struct route_in6, this is
moved to mif6 for the time being.
* More cleanup remains to be merged from ip_mroute.c to ip6_mroute.c.

v4 path tested using ports/net/mcast-tools.
v6 changes are mostly mechanical locking and *have not* been tested.
As these changes partially break some kernel ABIs, they will not
be MFCed. There is a lot more work to be done here.

Reviewed by: Pavlin Radoslavov

For all files including net/vnet.h directly include opt_route.h and
net/route.h.

Remove the hidden include of opt_route.h and net/route.h from net/vnet.h.

We need to make sure that both opt_route.h and net/route.h are included
before net/vnet.h because of the way MRT figures out the number of FIBs
from the kernel option. If we do not, we end up with the default number
of 1 when including net/vnet.h and array sizes are wrong.

This does not change the list of files which depend on opt_route.h
but we can identify them now more easily.

Rather than using hidden includes (with cicular dependencies),
directly include only the header files needed. This reduces the
unneeded spamming of various headers into lots of files.

For now, this leaves us with very few modules including vnet.h
and thus needing to depend on opt_route.h.

Reviewed by: brooks, gnn, des, zec, imp
Sponsored by: The FreeBSD Foundation

Change the initialization methodology for global variables scheduled
for virtualization.

Instead of initializing the affected global variables at instatiation,
assign initial values to them in initializer functions. As a rule,
initialization at instatiation for such variables should never be
introduced again from now on. Furthermore, enclose all instantiations
of such global variables in #ifdef VIMAGE_GLOBALS blocks.

Essentialy, this change should have zero functional impact. In the next
phase of merging network stack virtualization infrastructure from
p4/vimage branch, the new initialization methology will allow us to
switch between using global variables and their counterparts residing in
virtualization containers with minimum code churn, and in the long run
allow us to intialize multiple instances of such container structures.

Discussed at: devsummit Strassburg
Reviewed by: bz, julian
Approved by: julian (mentor)
Obtained from: //depot/projects/vimage-commit2/...
X-MFC after: never
Sponsored by: NLnet Foundation, The FreeBSD Foundation

- Import the HEAD csup code which is the basis for the cvsmode work.

Step 1.5 of importing the network stack virtualization infrastructure
from the vimage project, as per plan established at devsummit 08/08:
http://wiki.freebsd.org/Image/Notes200808DevSummit

Introduce INIT_VNET_*() initializer macros, VNET_FOREACH() iterator
macros, and CURVNET_SET() context setting macros, all currently
resolving to NOPs.

Prepare for virtualization of selected SYSCTL objects by introducing a
family of SYSCTL_V_*() macros, currently resolving to their global
counterparts, i.e. SYSCTL_V_INT() == SYSCTL_INT().

Move selected #defines from sys/sys/vimage.h to newly introduced header
files specific to virtualized subsystems (sys/net/vnet.h,
sys/netinet/vinet.h etc.).

All the changes are verified to have zero functional impact at this
point in time by doing MD5 comparision between pre- and post-change
object files(*).

(*) netipsec/keysock.c did not validate depending on compile time options.

Implemented by: julian, bz, brooks, zec
Reviewed by: julian, bz, brooks, kris, rwatson, ...
Approved by: julian (mentor)
Obtained from: //depot/projects/vimage-commit2/...
X-MFC after: never
Sponsored by: NLnet Foundation, The FreeBSD Foundation

Commit step 1 of the vimage project, (network stack)
virtualization work done by Marko Zec (zec@).

This is the first in a series of commits over the course
of the next few weeks.

Mark all uses of global variables to be virtualized
with a V_ prefix.
Use macros to map them back to their global names for
now, so this is a NOP change only.

We hope to have caught at least 85-90% of what is needed
so we do not invalidate a lot of outstanding patches again.

Obtained from: //depot/projects/vimage-commit2/...
Reviewed by: brooks, des, ed, mav, julian,
jamie, kris, rwatson, zec, ...
(various people I forgot, different versions)
md5 (with a bit of help)
Sponsored by: NLnet Foundation, The FreeBSD Foundation
X-MFC after: never
V_Commit_Message_Reviewed_By: more people than the patch

un-__P()

Clean up VCS Ids.

Space cleanup

Approved by: re (rwatson)

ANSIfy[1] plus some style cleanup nearby.

Discussed with: gnn, rwatson
Submitted by: Karl Sj?dahl - dunceor <dunceor gmail com> [1]
Approved by: re (rwatson)

Add comments about common idioms for cleanup pass at a later date.

Remove code which would never be used, viz a viz Quality-of-Service;
the token bucket filter got killed in netinet, so it gets killed here
too. Correct comments.

Add a comment about a struct which needs to be global.
Remove an unused global variable.
Staticize variables which do not need to be global.

Fix tinderbox. ip6_mrouter should be defined in raw_ip6.c as it is
tested to determine if the userland socket is open; this, in turn, is
used to determine if the module has been loaded.

Tested with: LINT

Make IPv6 multicast forwarding dynamically loadable from a GENERIC kernel.
It is built in the same module as IPv4 multicast forwarding, i.e. ip_mroute.ko,
if and only if IPv6 support is enabled for loadable modules.
Export IPv6 forwarding structs to userland netstat(1) via sysctl(9).

MFp4: 92972, 98913 + one more change

In ip6_sprintf no longer use and return one of eight static buffers
for printing/logging ipv6 addresses.
The caller now has to hand in a sufficiently large buffer as first
argument.

With exception of the if_name() macro, all definitions in net_osdep.h
were unused or already in if_var.h so add if_name() to if_var.h and
remove net_osdep.h along with all references to it.

Longer term we may want to kill off if_name() entierly since all modern
BSDs have if_xname variables rendering it unnecessicary.

ip6_mrouter_done(): use if_allmulti(0) for disabling the multicast promiscuous mode

Obtained from: KAME
MFC after: 2 days

added a note about the assumption for m->m_pkthdr.rcvif

Obtained from: KAME
MFC After: 1 day

fixed a kernel crash at the initialization time of PIM-SM register interface

MFC after: 2 days

fixed a kernel crash when IPv6 PIM-SM routing is enabled and a PIM register message is received

Obtained from: KAME
MFC After: 3 days

IPv6 was improperly defining its malloc type the same as IPv4 (M_IPMADDR,
M_IPMOPTS, M_MRTABLE). Thus we had conflicting instantiations.
Create an IPv6-specific type to overcome this.

added a knob to enable path MTU discovery for multicast packets.
(by default, it is disabled)

Submitted by: suz
Obtained from: KAME

fixed a kernel crash at the start-up time of an IPv6 multicast daemons o
(e.g. pim6dd, pim6sd)

MFC after: 3 days

scope cleanup. with this change
- most of the kernel code will not care about the actual encoding of
scope zone IDs and won't touch "s6_addr16[1]" directly.
- similarly, most of the kernel code will not care about link-local
scoped addresses as a special case.
- scope boundary check will be stricter. For example, the current
*BSD code allows a packet with src=::1 and dst=(some global IPv6
address) to be sent outside of the node, if the application do:
s = socket(AF_INET6);
bind(s, "::1");
sendto(s, some_global_IPv6_addr);
This is clearly wrong, since ::1 is only meaningful within a single
node, but the current implementation of the *BSD kernel cannot
reject this attempt.

Submitted by: JINMEI Tatuya <jinmei__at__isl.rdc.toshiba.co.jp>
Obtained from: KAME

/* -> /*- for license, minor formatting changes, separate for KAME

Remove advertising clause from University of California Regent's
license, per letter dated July 22, 1999 and email from Peter Wemm,
Alan Cox and Robert Watson.

Approved by: core, peter, alc, rwatson

Catch a few places where NULL (pointer) was used where 0 (integer) was
expected.

validate the argument for multicast routing socket options
correctly.

Obtained from: KAME
MFC after: 3 days

Replace the if_name and if_unit members of struct ifnet with new members
if_xname, if_dname, and if_dunit. if_xname is the name of the interface
and if_dname/unit are the driver name and instance.

This change paves the way for interface renaming and enhanced pseudo
device creation and configuration symantics.

Approved By: re (in principle)
Reviewed By: njl, imp
Tested On: i386, amd64, sparc64
Obtained From: NetBSD (if_xname)

reduce calling in6_addr2zoneid().

- change scope to zone.
- change node-local to interface-local.
- better error handling of address-to-scope mapping.
- use in6_clearscope().

Obtained from: KAME

correct linkmtu handling.

Obtained from: KAME

- fix typo in comments.
- style.
- NULL is not 0.
- some variables were renamed.
- nuke unused logic.
(there is no functional change.)

Obtained from: KAME

return(code) -> return (code)
(reduce diffs against KAME)

Back out M_* changes, per decision of the TRB.

Approved by: trb

Remove M_TRYWAIT/M_WAITOK/M_WAIT. Callers should use 0.
Merge M_NOWAIT/M_DONTWAIT into a single flag M_NOWAIT.

fixed a bug that IPv6 multicast packet is not forwarded if its packet size is equal to the outgoing interface's MTU

Approved by: re
Obtained from: KAME
MFC after: 3 days

Replace aux mbufs with packet tags:

o instead of a list of mbufs use a list of m_tag structures a la openbsd
o for netgraph et. al. extend the stock openbsd m_tag to include a 32-bit
ABI/module number cookie
o for openbsd compatibility define a well-known cookie MTAG_ABI_COMPAT and
use this in defining openbsd-compatible m_tag_find and m_tag_get routines
o rewrite KAME use of aux mbufs in terms of packet tags
o eliminate the most heavily used aux mbufs by adding an additional struct
inpcb parameter to ip_output and ip6_output to allow the IPsec code to
locate the security policy to apply to outbound packets
o bump __FreeBSD_version so code can be conditionalized
o fixup ipfilter's call to ip_output based on __FreeBSD_version

Reviewed by: julian, luigi (silent), -arch, -net, darren
Approved by: julian, silence from everyone else
Obtained from: openbsd (mostly)
MFC after: 1 month

Replace (ab)uses of "NULL" where "0" is really meant.

Back out my lats commit of locking down a socket, it conflicts with hsu's work.

Requested by: hsu

Lock down a socket, milestone 1.

o Add a mutex (sb_mtx) to struct sockbuf. This protects the data in a
socket buffer. The mutex in the receive buffer also protects the data
in struct socket.

o Determine the lock strategy for each members in struct socket.

o Lock down the following members:

- so_count
- so_options
- so_linger
- so_state

o Remove *_locked() socket APIs. Make the following socket APIs
touching the members above now require a locked socket:

- sodisconnect()
- soisconnected()
- soisconnecting()
- soisdisconnected()
- soisdisconnecting()
- sofree()
- soref()
- sorele()
- sorwakeup()
- sotryfree()
- sowakeup()
- sowwakeup()

Reviewed by: alfred

Revert the change of #includes in sys/filedesc.h and sys/socketvar.h.

Requested by: bde

Since locking sigio_lock is usually followed by calling pgsigio(),
move the declaration of sigio_lock and the definitions of SIGIO_*() to
sys/signalvar.h.

While I am here, sort include files alphabetically, where possible.

just merged cosmetic changes from KAME to ease sync between KAME and FreeBSD.
(based on freebsd4-snap-20020128)

Reviewed by: ume
MFC after: 1 week

double m_free() - not critical. from niklas@openbsd

Obtained from: KAME
MFC after: 1 week

Removed a wrong comment.

Obtained from: KAME
MFC after: 1 week

Wrap array accesses in macros, which also happen to be lvalues:

ifnet_addrs[i - 1] -> ifaddr_byindex(i)
ifindex2ifnet[i] -> ifnet_byindex(i)

This is intended to ease the conversion to SMPng.

Sync with recent KAME.
This work was based on kame-20010528-freebsd43-snap.tgz and some
critical problem after the snap was out were fixed.
There are many many changes since last KAME merge.

TODO:
- The definitions of SADB_* in sys/net/pfkeyv2.h are still different
from RFC2407/IANA assignment because of binary compatibility
issue. It should be fixed under 5-CURRENT.
- ip6po_m member of struct ip6_pktopts is no longer used. But, it
is still there because of binary compatibility issue. It should
be removed under 5-CURRENT.

Reviewed by: itojun
Obtained from: KAME
MFC after: 3 weeks

Fix typo: seperate -> separate.

Seperate does not exist in the english language.

kame 1.32 -> 1.33
in add_m6fc(), set interface list for all cases.
in response to a report from Hoerdt Mickael.

kame 1.31 -> 1.32
discard PIM register if the version of the inner packet is incorrect (i.e. IPv6)
(according to clarfication of recent discussion in the IETF pim ML)

sync with kame tree as of july00. tons of bug fixes/improvements.

API changes:
- additional IPv6 ioctls
- IPsec PF_KEY API was changed, it is mandatory to upgrade setkey(8).
(also syntax change)

Just need to pass the address family to if_simloop(), not the whole sockaddr.

Sorry I didn't commit these files at the commit just a few minutes before.
(IPv6 multicast routing)
I think I mistakenly touched TAB and the last arg sys/netinet6 to
the cvs commit changed to sys/netinet6/in6_proto.c.