sys: Remove $FreeBSD$: one-line .c pattern

Remove /^[\s*]*__FBSDID\("\$FreeBSD\$"\);?\s*\n/

IfAPI: Explicitly include <net/if_private.h> in netstack

Summary:
In preparation of making if_t completely opaque outside of the netstack,
explicitly include the header. <net/if_var.h> will stop including the
header in the future.

Sponsored by: Juniper Networks, Inc.
Reviewed by: glebius, melifaro
Differential Revision: https://reviews.freebsd.org/D38200

routing: refactor private KPI
* Make nhgrp_get_nhops() return const struct weightened_nhop to
indicate that the list is immutable
* Make nhgrp_get_group() return the actual group, instead of
group+weight.

MFC after: 2 weeks

Fix unused-function waring when compiling with FIB_ALGO.

MFC after: 3 days

Add modular fib lookup framework.

This change introduces framework that allows to dynamically
attach or detach longest prefix match (lpm) lookup algorithms
to speed up datapath route tables lookups.

Framework takes care of handling initial synchronisation,
route subscription, nhop/nhop groups reference and indexing,
dataplane attachments and fib instance algorithm setup/teardown.
Framework features automatic algorithm selection, allowing for
picking the best matching algorithm on-the-fly based on the
amount of routes in the routing table.

Currently framework code is guarded under FIB_ALGO config option.
An idea is to enable it by default in the next couple of weeks.

The following algorithms are provided by default:
IPv4:
* bsearch4 (lockless binary search in a special IP array), tailored for
small-fib (<16 routes)
* radix4_lockless (lockless immutable radix, re-created on every rtable change),
tailored for small-fib (<1000 routes)
* radix4 (base system radix backend)
* dpdk_lpm4 (DPDK DIR24-8-based lookups), lockless datastrucure, optimized
for large-fib (D27412)
IPv6:
* radix6_lockless (lockless immutable radix, re-created on every rtable change),
tailed for small-fib (<1000 routes)
* radix6 (base system radix backend)
* dpdk_lpm6 (DPDK DIR24-8-based lookups), lockless datastrucure, optimized
for large-fib (D27412)

Performance changes:
Micro benchmarks (I7-7660U, single-core lookups, 2048k dst, code in D27604):
IPv4:
8 routes:
radix4: ~20mpps
radix4_lockless: ~24.8mpps
bsearch4: ~69mpps
dpdk_lpm4: ~67 mpps
700k routes:
radix4_lockless: 3.3mpps
dpdk_lpm4: 46mpps

IPv6:
8 routes:
radix6_lockless: ~20mpps
dpdk_lpm6: ~70mpps
100k routes:
radix6_lockless: 13.9mpps
dpdk_lpm6: 57mpps

Forwarding benchmarks:
+ 10-15% IPv4 forwarding performance (small-fib, bsearch4)
+ 25% IPv4 forwarding performance (full-view, dpdk_lpm4)
+ 20% IPv6 forwarding performance (full-view, dpdk_lpm6)

Control:
Framwork adds the following runtime sysctls:

List algos
* net.route.algo.inet.algo_list: bsearch4, radix4_lockless, radix4
* net.route.algo.inet6.algo_list: radix6_lockless, radix6, dpdk_lpm6
Debug level (7=LOG_DEBUG, per-route)
net.route.algo.debug_level: 5
Algo selection (currently only for fib 0):
net.route.algo.inet.algo: bsearch4
net.route.algo.inet6.algo: radix6_lockless

Support for manually changing algos in non-default fib will be added
soon. Some sysctl names will be changed in the near future.

Differential Revision: https://reviews.freebsd.org/D27401

Refactor fib4/fib6 functions.

No functional changes.

* Make lookup path of fib<4|6>_lookup_debugnet() separate functions
(fib<46>_lookup_rt()). These will be used in the control plane code
requiring unlocked radix operations and actual prefix pointer.
* Make lookup part of fib<4|6>_check_urpf() separate functions.
This change simplifies the switch to alternative lookup implementations,
which helps algorithmic lookups introduction.
* While here, use static initializers for IPv4/IPv6 keys

Differential Revision: https://reviews.freebsd.org/D27405

Implement flowid calculation for outbound connections to balance
connections over multiple paths.

Multipath routing relies on mbuf flowid data for both transit
and outbound traffic. Current code fills mbuf flowid from inp_flowid
for connection-oriented sockets. However, inp_flowid is currently
not calculated for outbound connections.

This change creates simple hashing functions and starts calculating hashes
for TCP,UDP/UDP-Lite and raw IP if multipath routes are present in the
system.

Reviewed by: glebius (previous version),ae
Differential Revision: https://reviews.freebsd.org/D26523

Introduce scalable route multipath.

This change is based on the nexthop objects landed in D24232.

The change introduces the concept of nexthop groups.
Each group contains the collection of nexthops with their
relative weights and a dataplane-optimized structure to enable
efficient nexthop selection.

Simular to the nexthops, nexthop groups are immutable. Dataplane part
gets compiled during group creation and is basically an array of
nexthop pointers, compiled w.r.t their weights.

With this change, `rt_nhop` field of `struct rtentry` contains either
nexthop or nexthop group. They are distinguished by the presense of
NHF_MULTIPATH flag.
All dataplane lookup functions returns pointer to the nexthop object,
leaving nexhop groups details inside routing subsystem.

User-visible changes:

The change is intended to be backward-compatible: all non-mpath operations
should work as before with ROUTE_MPATH and net.route.multipath=1.

All routes now comes with weight, default weight is 1, maximum is 2^24-1.

Current maximum multipath group width is statically set to 64.
This will become sysctl-tunable in the followup changes.

Using functionality:
* Recompile kernel with ROUTE_MPATH
* set net.route.multipath to 1

route add -6 2001:db8::/32 2001:db8::2 -weight 10
route add -6 2001:db8::/32 2001:db8::3 -weight 20

netstat -6On

Nexthop groups data

Internet6:
GrpIdx NhIdx Weight Slots Gateway Netif Refcnt
1 ------- ------- ------- --------------------------------------- --------- 1
13 10 1 2001:db8::2 vlan2
14 20 2 2001:db8::3 vlan2

Next steps:
* Land outbound hashing for locally-originated routes ( D26523 ).
* Fix net/bird multipath (net/frr seems to work fine)
* Add ROUTE_MPATH to GENERIC
* Set net.route.multipath=1 by default

Tested by: olivier
Reviewed by: glebius
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D26449

net: clean up empty lines in .c and .h files

Move net/route/shared.h definitions to net/route/route_var.h.

No functional changes.

net/route/shared.h was created in the inital phases of nexthop conversion.
It was intended to serve the same purpose as route_var.h - share definitions
of functions and structures between the routing subsystem components. At
that time route_var.h was included by many files external to the routing
subsystem, which largerly defeats its purpose.

As currently this is not the case anymore and amount of route_var.h includes
is roughly the same as shared.h, retire the latter in favour of the former.

Complete conversions from fib<4|6>_lookup_nh_<basic|ext> to fib<4|6>_lookup().

fib[46]_lookup_nh_ represents pre-epoch generation of fib api, providing less guarantees
over pointer validness and requiring on-stack data copying.

With no callers remaining, remove fib[46]_lookup_nh_ functions.

Submitted by: Neel Chauhan <neel AT neelc DOT org>
Differential Revision: https://reviews.freebsd.org/D25445

Move <add|del|change>_route() functions to route_ctl.c in preparation of
multipath control plane changed described in D24141.

Currently route.c contains core routing init/teardown functions, route table
manipulation functions and various helper functions, resulting in >2KLOC
file in total. This change moves most of the route table manipulation parts
to a dedicated file, simplifying planned multipath changes and making
route.c more manageable.

Differential Revision: https://reviews.freebsd.org/D24870

Move route_temporal.c and route_var.h to net/route.

Nexthop objects implementation, defined in r359823,
introduced sys/net/route directory intended to hold all
routing-related code. Move recently-introduced route_temporal.c and
private route_var.h header there.

Differential Revision: https://reviews.freebsd.org/D24597

Convert debugnet to the new routing KPI.

Introduce new fib[46]_lookup_debugnet() functions serving as a
special interface for the crash-time operations. Underlying
implementation will try to return lookup result if
datastructures are not corrupted, avoding locking.

Convert debugnet to use fib4_lookup_debugnet() and switch it
to use nexthops instead of rtentries.

Reviewed by: cem
Differential Revision: https://reviews.freebsd.org/D24555

Fix lookup key generation in fib6_check_urpf().

The version introduced in r359823 assumed D23051
had been in tree already. As this is not the case yet,
revert to sockaddr.

Introduce nexthop objects and new routing KPI.

This is the foundational change for the routing subsytem rearchitecture.
More details and goals are available in https://reviews.freebsd.org/D24141 .

This patch introduces concept of nexthop objects and new nexthop-based
routing KPI.

Nexthops are objects, containing all necessary information for performing
the packet output decision. Output interface, mtu, flags, gw address goes
there. For most of the cases, these objects will serve the same role as
the struct rtentry is currently serving.
Typically there will be low tens of such objects for the router even with
multiple BGP full-views, as these objects will be shared between routing
entries. This allows to store more information in the nexthop.

New KPI:

struct nhop_object *fib4_lookup(uint32_t fibnum, struct in_addr dst,
uint32_t scopeid, uint32_t flags, uint32_t flowid);
struct nhop_object *fib6_lookup(uint32_t fibnum, const struct in6_addr *dst6,
uint32_t scopeid, uint32_t flags, uint32_t flowid);

These 2 function are intended to replace all all flavours of
<in_|in6_>rtalloc[1]<_ign><_fib>, mpath functions and the previous
fib[46]-generation functions.

Upon successful lookup, they return nexthop object which is guaranteed to
exist within current NET_EPOCH. If longer lifetime is desired, one can
specify NHR_REF as a flag and get a referenced version of the nexthop.
Reference semantic closely resembles rtentry one, allowing sed-style conversion.

Additionally, another 2 functions are introduced to support uRPF functionality
inside variety of our firewalls. Their primary goal is to hide the multipath
implementation details inside the routing subsystem, greatly simplifying
firewalls implementation:

int fib4_lookup_urpf(uint32_t fibnum, struct in_addr dst, uint32_t scopeid,
uint32_t flags, const struct ifnet *src_if);
int fib6_lookup_urpf(uint32_t fibnum, const struct in6_addr *dst6, uint32_t scopeid,
uint32_t flags, const struct ifnet *src_if);

All functions have a separate scopeid argument, paving way to eliminating IPv6 scope
embedding and allowing to support IPv4 link-locals in the future.

Structure changes:
* rtentry gets new 'rt_nhop' pointer, slightly growing the overall size.
* rib_head gets new 'rnh_preadd' callback pointer, slightly growing overall sz.

Old KPI:
During the transition state old and new KPI will coexists. As there are another 4-5
decent-sized conversion patches, it will probably take a couple of weeks.
To support both KPIs, fields not required by the new KPI (most of rtentry) has to be
kept, resulting in the temporary size increase.
Once conversion is finished, rtentry will notably shrink.

More details:
* architectural overview: https://reviews.freebsd.org/D24141
* list of the next changes: https://reviews.freebsd.org/D24232

Reviewed by: ae,glebius(initial version)
Differential Revision: https://reviews.freebsd.org/D24232

in6_fib: return nh_ia in the ext interface as we do for IPv4

Like for IPv4 add nh_ia to the ext interface and return rt_ifa
in order to be used for, e.g., packet/octets accounting purposes.

Reviewed by: melifaro
MFC after: 1 week
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D23873

fib6_rte_to_nh_*: return a link-local gw address with scope embedded

In fib6_rte_to_nh_* when returning a link-local gateway address
currently we do clear the scope. That could be recovered using
the ifp returned as well, but the code in general seems to
expect a link-local address with scope embeedded as otherwise
the "dst" (gw) passed to the output routines will not include
scope and not send the packet out (the right interface).

Do not clear the scope when returning a link-local address and
allow packets to go out (the right interface).

Remove the (now) extra scope recovery in the IPv6 fast-fwd code.

Sponsored by: Netflix
Reviewed by: melifaro, ae
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D23872

Document requirements for the 'struct route' variations.

MFC after: 2 weeks

Switch RIB and RADIX_NODE_HEAD lock from rwlock(9) to rmlock(9).

Using of rwlock with multiqueue NICs for IP forwarding on high pps
produces high lock contention and inefficient. Rmlock fits better for
such workloads.

Reviewed by: melifaro, olivier
Obtained from: Yandex LLC
Sponsored by: Yandex LLC
Differential Revision: https://reviews.freebsd.org/D15789

Renumber copyright clause 4

Renumber cluase 4 to 3, per what everybody else did when BSD granted
them permission to remove clause 3. My insistance on keeping the same
numbering for legal reasons is too pedantic, so give up on that point.

Submitted by: Jan Schaumann <jschauma@stevens.edu>
Pull Request: https://github.com/freebsd/freebsd/pull/96

MFP r287070,r287073: split radix implementation and route table structure.

There are number of radix consumers in kernel land (pf,ipfw,nfs,route)
with different requirements. In fact, first 3 don't have _any_ requirements
and first 2 does not use radix locking. On the other hand, routing
structure do have these requirements (rnh_gen, multipath, custom
to-be-added control plane functions, different locking).
Additionally, radix should not known anything about its consumers internals.

So, radix code now uses tiny 'struct radix_head' structure along with
internal 'struct radix_mask_head' instead of 'struct radix_node_head'.
Existing consumers still uses the same 'struct radix_node_head' with
slight modifications: they need to pass pointer to (embedded)
'struct radix_head' to all radix callbacks.

Routing code now uses new 'struct rib_head' with different locking macro:
RADIX_NODE_HEAD prefix was renamed to RIB_ (which stands for routing
information base).

New net/route_var.h header was added to hold routing subsystem internal
data. 'struct rib_head' was placed there. 'struct rtentry' will also
be moved there soon.

Bring RADIX_MPATH support to new routing KPI to ease migration.

Move actual rte selection process from rtalloc_mpath_fib()
to the rt_path_selectrte() function. Add public
rt_mpath_select() to use in fibX_lookup_ functions.

Make in_arpinput(), inp_lookup_mcast_ifp(), icmp_reflect(),
ip_dooptions(), icmp6_redirect_input(), in6_lltable_rtcheck(),
in6p_lookup_mcast_ifp() and in6_selecthlim() use new routing api.

Eliminate now-unused ip_rtaddr().
Fix lookup key fib6_lookup_nh_basic() which was lost diring merge.
Make fib6_lookup_nh_basic() and fib6_lookup_nh_extended() always
return IPv6 destination address with embedded scope. Currently
rw_gateway has it scope embedded, do the same for non-gatewayed
destinations.

Sponsored by: Yandex LLC

Merge helper fib* functions used for basic lookups.

Vast majority of rtalloc(9) users require only basic info from
route table (e.g. "does the rtentry interface match with the interface
I have?". "what is the MTU?", "Give me the IPv4 source address to use",
etc..).
Instead of hand-rolling lookups, checking if rtentry is up, valid,
dealing with IPv6 mtu, finding "address" ifp (almost never done right),
provide easy-to-use API hiding all the complexity and returning the
needed info into small on-stack structure.

This change also helps hiding route subsystem internals (locking, direct
rtentry accesses).
Additionaly, using this API improves lookup performance since rtentry is not
locked.
(This is safe, since all the rtentry changes happens under both radix WLOCK
and rtentry WLOCK).

Sponsored by: Yandex LLC