#
29363fb4 |
|
23-Nov-2023 |
Warner Losh <imp@FreeBSD.org> |
sys: Remove ancient SCCS tags. Remove ancient SCCS tags from the tree, automated scripting, with two minor fixup to keep things compiling. All the common forms in the tree were removed with a perl script. Sponsored by: Netflix
|
#
2ff63af9 |
|
16-Aug-2023 |
Warner Losh <imp@FreeBSD.org> |
sys: Remove $FreeBSD$: one-line .h pattern Remove /^\s*\*+\s*\$FreeBSD\$.*$\n/
|
#
bb06a80c |
|
29-Jun-2023 |
Alexander V. Chernikov <melifaro@FreeBSD.org> |
netinet[6]: make in[6]_control use ucred instead of td. Reviewed by: markj, zlei Differential Revision: https://reviews.freebsd.org/D40793 MFC after: 2 weeks
|
#
1e9482f4 |
|
08-Oct-2022 |
Alexander Motin <mav@FreeBSD.org> |
inet: Simplify if_multiaddrs iteration. Similar to 2cd6ad766eb23 for inet6 drop ifma_restart use, creating more problems than solving. It is no longer needed after epoch introduction. While there, add NULL check for ifma_ifp in igmp_change_state(), that sometimes caused panics on interface destruction. MFC after: 2 weeks
|
#
fcb3f813 |
|
03-Oct-2022 |
Gleb Smirnoff <glebius@FreeBSD.org> |
netinet*: remove PRC_ constants and streamline ICMP processing In the original design of the network stack from the protocol control input method pr_ctlinput was used notify the protocols about two very different kinds of events: internal system events and receival of an ICMP messages from outside. These events were coded with PRC_ codes. Today these methods are removed from the protosw(9) and are isolated to IPv4 and IPv6 stacks and are called only from icmp*_input(). The PRC_ codes now just create a shim layer between ICMP codes and errors or actions taken by protocols. - Change ipproto_ctlinput_t to pass just pointer to ICMP header. This allows protocols to not deduct it from the internal IP header. - Change ip6proto_ctlinput_t to pass just struct ip6ctlparam pointer. It has all the information needed to the protocols. In the structure, change ip6c_finaldst fields to sockaddr_in6. The reason is that icmp6_input() already has this address wrapped in sockaddr, and the protocols want this address as sockaddr. - For UDP tunneling control input, as well as for IPSEC control input, change the prototypes to accept a transparent union of either ICMP header pointer or struct ip6ctlparam pointer. - In icmp_input() and icmp6_input() do only validation of ICMP header and count bad packets. The translation of ICMP codes to errors/actions is done by protocols. - Provide icmp_errmap() and icmp6_errmap() as substitute to inetctlerrmap, inet6ctlerrmap arrays. - In protocol ctlinput methods either trust what icmp_errmap() recommend, or do our own logic based on the ICMP header. Differential revision: https://reviews.freebsd.org/D36731
|
#
f277746e |
|
12-Aug-2022 |
Gleb Smirnoff <glebius@FreeBSD.org> |
protosw: change prototype for pr_control For some reason protosw.h is used during world complation and userland is not aware of caddr_t, a relic from the first version of C. Broken buildworld is good reason to get rid of yet another caddr_t in kernel. Fixes: 886fc1e80490fb03e72e306774766cbb2c733ac6
|
#
b8103ca7 |
|
11-Aug-2022 |
Gleb Smirnoff <glebius@FreeBSD.org> |
netinet: get interface event notifications directly via EVENTHANDLER(9) The old mechanism of getting them via domains/protocols control input is a relict from the previous century, when nothing like EVENTHANDLER(9) existed yet. Retire PRC_IFDOWN/PRC_IFUP as netinet was the only one to use them. Reviewed by: melifaro Differential revision: https://reviews.freebsd.org/D36116
|
#
c8ee75f2 |
|
10-Oct-2021 |
Gleb Smirnoff <glebius@FreeBSD.org> |
Use network epoch to protect local IPv4 addresses hash. The modification to the hash are already naturally locked by in_control_sx. Convert the hash lists to CK lists. Remove the in_ifaddr_rmlock. Assert the network epoch where necessary. Most cases when the hash lookup is done the epoch is already entered. Cover a few cases, that need entering the epoch, which mostly is initial configuration of tunnel interfaces and multicast addresses. Reviewed by: melifaro Differential revision: https://reviews.freebsd.org/D32584
|
#
2144431c |
|
08-Oct-2021 |
Gleb Smirnoff <glebius@FreeBSD.org> |
Remove in_ifaddr_lock acquisiton to access in_ifaddrhead. An IPv4 address is embedded into an ifaddr which is freed via epoch. And the in_ifaddrhead is already a CK list. Use the network epoch to protect against use after free. Next step would be to CK-ify the in_addr hash and get rid of the... Reviewed by: melifaro Differential Revision: https://reviews.freebsd.org/D32434
|
#
f3245be3 |
|
23-Feb-2021 |
Kristof Provost <kp@FreeBSD.org> |
net: remove legacy in_addmulti() Despite the comment to the contrary neither pf nor carp use in_addmulti(). Nothing does, so get rid of it. Carp stopped using it in 08b68b0e4c6b132127919cfbaf7275c727ca7843 (2011). It's unclear when pf stopped using it, but before d6d3f01e0a3395c1fae34a3c4be7b051cb2d7581 (2012). Reviewed by: bz@, melifaro@ Sponsored by: Rubicon Communications, LLC ("Netgate") Differential Revision: https://reviews.freebsd.org/D28918
|
#
130aebba |
|
19-Jan-2021 |
Alexander V. Chernikov <melifaro@FreeBSD.org> |
Further refactor IPv4 interface route creation. * Fix bug with /32 aliases introduced in 81728a538d24. * Explicitly document business logic for IPv4 ifa routes. * Remove remnants of rtinit() * Deduplicate ifa->route prefix code by moving it into ia_getrtprefix() * Deduplicate conditional check for ifa_maintain_loopback_route() by moving into ia_need_loopback_route() * Remove now-unused flags argument from in_addprefix(). Reviewed by: donner PR: 252883 Differential Revision: https://reviews.freebsd.org/D28246
|
#
81728a53 |
|
08-Jan-2021 |
Alexander V. Chernikov <melifaro@FreeBSD.org> |
Split rtinit() into multiple functions. rtinit[1]() is a function used to add or remove interface address prefix routes, similar to ifa_maintain_loopback_route(). It was intended to be family-agnostic. There is a problem with this approach in reality. 1) IPv6 code does not use it for the ifa routes. There is a separate layer, nd6_prelist_(), providing interface for maintaining interface routes. Its part, responsible for the actual route table interaction, mimics rtenty() code. 2) rtinit tries to combine multiple actions in the same function: constructing proper route attributes and handling iterations over multiple fibs, for the non-zero net.add_addr_allfibs use case. It notably increases the code complexity. 3) dstaddr handling. flags parameter re-uses RTF_ flags. As there is no special flag for p2p connections, host routes and p2p routes are handled in the same way. Additionally, mapping IFA flags to RTF flags makes the interface pretty messy. It make rtinit() to clash with ifa_mainain_loopback_route() for IPV4 interface aliases. 4) rtinit() is the last customer passing non-masked prefixes to rib_action(), complicating rib_action() implementation. 5) rtinit() coupled ifa announce/withdrawal notifications, producing "false positive" ifa messages in certain corner cases. To address all these points, the following has been done: * rtinit() has been split into multiple functions: - Route attribute construction were moved to the per-address-family functions, dealing with (2), (3) and (4). - funnction providing net.add_addr_allfibs handling and route rtsock notificaions is the new routing table inteface. - rtsock ifa notificaion has been moved out as well. resulting set of funcion are only responsible for the actual route notifications. Side effects: * /32 alias does not result in interface routes (/32 route and "host" route) * RTF_PINNED is now set for IPv6 prefixes corresponding to the interface addresses Differential revision: https://reviews.freebsd.org/D28186
|
#
2f23f45b |
|
14-Aug-2020 |
Alexander V. Chernikov <melifaro@FreeBSD.org> |
Simplify dom_<rtattach|rtdetach>. Remove unused arguments from dom_rtattach/dom_rtdetach functions and make them return/accept 'struct rib_head' instead of 'void **'. Declare inet/inet6 implementations in the relevant _var.h headers similar to domifattach / domifdetach. Add rib_subscribe_internal() function to accept subscriptions to the rnh directly. Differential Revision: https://reviews.freebsd.org/D26053
|
#
3689652c |
|
10-Aug-2020 |
Hans Petter Selasky <hselasky@FreeBSD.org> |
Make sure the multicast release tasks are properly drained when destroying a VNET or a network interface. Else the inm release tasks, both IPv4 and IPv6 may cause a panic accessing a freed VNET or network interface. Reviewed by: jmg@ Discussed with: bz@ Differential Revision: https://reviews.freebsd.org/D24914 MFC after: 1 week Sponsored by: Mellanox Technologies
|
#
1b0051ba |
|
28-Apr-2020 |
Alexander V. Chernikov <melifaro@FreeBSD.org> |
Eliminate now-unused parts of old routing KPI. r360292 switched most of the remaining routing customers to a new KPI, leaving a bunch of wrappers for old routing lookup functions unused. Remove them from the tree as a part of routing cleanup. Differential Revision: https://reviews.freebsd.org/D24569
|
#
34a5582c |
|
22-Jan-2020 |
Alexander V. Chernikov <melifaro@FreeBSD.org> |
Bring back redirect route expiration. Redirect (and temporal) route expiration was broken a while ago. This change brings route expiration back, with unified IPv4/IPv6 handling code. It introduces net.inet.icmp.redirtimeout sysctl, allowing to set an expiration time for redirected routes. It defaults to 10 minutes, analogues with net.inet6.icmp6.redirtimeout. Implementation uses separate file, route_temporal.c, as route.c is already bloated with tons of different functions. Internally, expiration is implemented as an per-rnh callout scheduled when route with non-zero rt_expire time is added or rt_expire is changed. It does not add any overhead when no temporal routes are present. Callout traverses entire routing tree under wlock, scheduling expired routes for deletion and calculating the next time it needs to be run. The rationale for such implemention is the following: typically workloads requiring large amount of routes have redirects turned off already, while the systems with small amount of routes will not inhibit large overhead during tree traversal. This changes also fixes netstat -rn display of route expiration time, which has been broken since the conversion from kread() to sysctl. Reviewed by: bz MFC after: 3 weeks Differential Revision: https://reviews.freebsd.org/D23075
|
#
b8a6e03f |
|
07-Oct-2019 |
Gleb Smirnoff <glebius@FreeBSD.org> |
Widen NET_EPOCH coverage. When epoch(9) was introduced to network stack, it was basically dropped in place of existing locking, which was mutexes and rwlocks. For the sake of performance mutex covered areas were as small as possible, so became epoch covered areas. However, epoch doesn't introduce any contention, it just delays memory reclaim. So, there is no point to minimise epoch covered areas in sense of performance. Meanwhile entering/exiting epoch also has non-zero CPU usage, so doing this less often is a win. Not the least is also code maintainability. In the new paradigm we can assume that at any stage of processing a packet, we are inside network epoch. This makes coding both input and output path way easier. On output path we already enter epoch quite early - in the ip_output(), in the ip6_output(). This patch does the same for the input path. All ISR processing, network related callouts, other ways of packet injection to the network stack shall be performed in net_epoch. Any leaf function that walks network configuration now asserts epoch. Tricky part is configuration code paths - ioctls, sysctls. They also call into leaf functions, so some need to be changed. This patch would introduce more epoch recursions (see EPOCH_TRACE) than we had before. They will be cleaned up separately, as several of them aren't trivial. Note, that unlike a lock recursion the epoch recursion is safe and just wastes a bit of resources. Reviewed by: gallatin, hselasky, cy, adrian, kristof Differential Revision: https://reviews.freebsd.org/D19111
|
#
59854ecf |
|
25-Jun-2019 |
Hans Petter Selasky <hselasky@FreeBSD.org> |
Convert all IPv4 and IPv6 multicast memberships into using a STAILQ instead of a linear array. The multicast memberships for the inpcb structure are protected by a non-sleepable lock, INP_WLOCK(), which needs to be dropped when calling the underlying possibly sleeping if_ioctl() method. When using a linear array to keep track of multicast memberships, the computed memory location of the multicast filter may suddenly change, due to concurrent insertion or removal of elements in the linear array. This in turn leads to various invalid memory access issues and kernel panics. To avoid this problem, put all multicast memberships on a STAILQ based list. Then the memory location of the IPv4 and IPv6 multicast filters become fixed during their lifetime and use after free and memory leak issues are easier to track, for example by: vmstat -m | grep multi All list manipulation has been factored into inline functions including some macros, to easily allow for a future hash-list implementation, if needed. This patch has been tested by pho@ . Differential Revision: https://reviews.freebsd.org/D20080 Reviewed by: markj @ MFC after: 1 week Sponsored by: Mellanox Technologies
|
#
4f6c66cc |
|
23-May-2018 |
Matt Macy <mmacy@FreeBSD.org> |
UDP: further performance improvements on tx Cumulative throughput while running 64 netperf -H $DUT -t UDP_STREAM -- -m 1 on a 2x8x2 SKL went from 1.1Mpps to 2.5Mpps Single stream throughput increases from 910kpps to 1.18Mpps Baseline: https://people.freebsd.org/~mmacy/2018.05.11/udpsender2.svg - Protect read access to global ifnet list with epoch https://people.freebsd.org/~mmacy/2018.05.11/udpsender3.svg - Protect short lived ifaddr references with epoch https://people.freebsd.org/~mmacy/2018.05.11/udpsender4.svg - Convert if_afdata read lock path to epoch https://people.freebsd.org/~mmacy/2018.05.11/udpsender5.svg A fix for the inpcbhash contention is pending sufficient time on a canary at LLNW. Reviewed by: gallatin Sponsored by: Limelight Networks Differential Revision: https://reviews.freebsd.org/D15409
|
#
d7c5a620 |
|
18-May-2018 |
Matt Macy <mmacy@FreeBSD.org> |
ifnet: Replace if_addr_lock rwlock with epoch + mutex Run on LLNW canaries and tested by pho@ gallatin: Using a 14-core, 28-HTT single socket E5-2697 v3 with a 40GbE MLX5 based ConnectX 4-LX NIC, I see an almost 12% improvement in received packet rate, and a larger improvement in bytes delivered all the way to userspace. When the host receiving 64 streams of netperf -H $DUT -t UDP_STREAM -- -m 1, I see, using nstat -I mce0 1 before the patch: InMpps OMpps InGbs OGbs err TCP Est %CPU syscalls csw irq GBfree 4.98 0.00 4.42 0.00 4235592 33 83.80 4720653 2149771 1235 247.32 4.73 0.00 4.20 0.00 4025260 33 82.99 4724900 2139833 1204 247.32 4.72 0.00 4.20 0.00 4035252 33 82.14 4719162 2132023 1264 247.32 4.71 0.00 4.21 0.00 4073206 33 83.68 4744973 2123317 1347 247.32 4.72 0.00 4.21 0.00 4061118 33 80.82 4713615 2188091 1490 247.32 4.72 0.00 4.21 0.00 4051675 33 85.29 4727399 2109011 1205 247.32 4.73 0.00 4.21 0.00 4039056 33 84.65 4724735 2102603 1053 247.32 After the patch InMpps OMpps InGbs OGbs err TCP Est %CPU syscalls csw irq GBfree 5.43 0.00 4.20 0.00 3313143 33 84.96 5434214 1900162 2656 245.51 5.43 0.00 4.20 0.00 3308527 33 85.24 5439695 1809382 2521 245.51 5.42 0.00 4.19 0.00 3316778 33 87.54 5416028 1805835 2256 245.51 5.42 0.00 4.19 0.00 3317673 33 90.44 5426044 1763056 2332 245.51 5.42 0.00 4.19 0.00 3314839 33 88.11 5435732 1792218 2499 245.52 5.44 0.00 4.19 0.00 3293228 33 91.84 5426301 1668597 2121 245.52 Similarly, netperf reports 230Mb/s before the patch, and 270Mb/s after the patch Reviewed by: gallatin Sponsored by: Limelight Networks Differential Revision: https://reviews.freebsd.org/D15366
|
#
b6f6f880 |
|
06-May-2018 |
Matt Macy <mmacy@FreeBSD.org> |
r333175 introduced deferred deletion of multicast addresses in order to permit the driver ioctl to sleep on commands to the NIC when updating multicast filters. More generally this permitted driver's to use an sx as a softc lock. Unfortunately this change introduced a race whereby a a multicast update would still be queued for deletion when ifconfig deleted the interface thus calling down in to _purgemaddrs and synchronously deleting _all_ of the multicast addresses on the interface. Synchronously remove all external references to a multicast address before enqueueing for delete. Reported by: lwhsu Approved by: sbruno
|
#
f3e1324b |
|
02-May-2018 |
Stephen Hurd <shurd@FreeBSD.org> |
Separate list manipulation locking from state change in multicast Multicast incorrectly calls in to drivers with a mutex held causing drivers to have to go through all manner of contortions to use a non sleepable lock. Serialize multicast updates instead. Submitted by: mmacy <mmacy@mattmacy.io> Reviewed by: shurd, sbruno Sponsored by: Limelight Networks Differential Revision: https://reviews.freebsd.org/D14969
|
#
51369649 |
|
20-Nov-2017 |
Pedro F. Giffuni <pfg@FreeBSD.org> |
sys: further adoption of SPDX licensing ID tags. Mainly focus on files that use BSD 3-Clause license. The Software Package Data Exchange (SPDX) group provides a specification to make it easier for automated tools to detect and summarize well known opensource licenses. We are gradually adopting the specification, noting that the tags are considered only advisory and do not, in any way, superceed or replace the license texts. Special thanks to Wind River for providing access to "The Duke of Highlander" tool: an older (2014) run over FreeBSD tree was useful as a starting point.
|
#
fbbd9655 |
|
28-Feb-2017 |
Warner Losh <imp@FreeBSD.org> |
Renumber copyright clause 4 Renumber cluase 4 to 3, per what everybody else did when BSD granted them permission to remove clause 3. My insistance on keeping the same numbering for legal reasons is too pedantic, so give up on that point. Submitted by: Jan Schaumann <jschauma@stevens.edu> Pull Request: https://github.com/freebsd/freebsd/pull/96
|
#
2d9db0bc |
|
01-Oct-2016 |
Eric van Gyzen <vangyzen@FreeBSD.org> |
Add GARP retransmit capability A single gratuitous ARP (GARP) is always transmitted when an IPv4 address is added to an interface, and that is usually sufficient. However, in some circumstances, such as when a shared address is passed between cluster nodes, this single GARP may occasionally be dropped or lost. This can lead to neighbors on the network link working with a stale ARP cache and sending packets destined for that address to the node that previously owned the address, which may not respond. To avoid this situation, GARP retransmissions can be enabled by setting the net.link.ether.inet.garp_rexmit_count sysctl to a value greater than zero. The setting represents the maximum number of retransmissions. The interval between retransmissions is calculated using an exponential backoff algorithm, doubling each time, so the retransmission intervals are: {1, 2, 4, 8, 16, ...} (seconds). Due to the exponential backoff algorithm used for the interval between GARP retransmissions, the maximum number of retransmissions is limited to 16 for sanity. This limit corresponds to a maximum interval between retransmissions of 2^16 seconds ~= 18 hours. Increasing this limit is possible, but sending out GARPs spaced days apart would be of little use. Submitted by: David A. Bright <david.a.bright@dell.com> MFC after: 1 month Relnotes: yes Sponsored by: Dell EMC Differential Revision: https://reviews.freebsd.org/D7695
|
#
89856f7e |
|
21-Jun-2016 |
Bjoern A. Zeeb <bz@FreeBSD.org> |
Get closer to a VIMAGE network stack teardown from top to bottom rather than removing the network interfaces first. This change is rather larger and convoluted as the ordering requirements cannot be separated. Move the pfil(9) framework to SI_SUB_PROTO_PFIL, move Firewalls and related modules to their own SI_SUB_PROTO_FIREWALL. Move initialization of "physical" interfaces to SI_SUB_DRIVERS, move virtual (cloned) interfaces to SI_SUB_PSEUDO. Move Multicast to SI_SUB_PROTO_MC. Re-work parts of multicast initialisation and teardown, not taking the huge amount of memory into account if used as a module yet. For interface teardown we try to do as many of them as we can on SI_SUB_INIT_IF, but for some this makes no sense, e.g., when tunnelling over a higher layer protocol such as IP. In that case the interface has to go along (or before) the higher layer protocol is shutdown. Kernel hhooks need to go last on teardown as they may be used at various higher layers and we cannot remove them before we cleaned up the higher layers. For interface teardown there are multiple paths: (a) a cloned interface is destroyed (inside a VIMAGE or in the base system), (b) any interface is moved from a virtual network stack to a different network stack ("vmove"), or (c) a virtual network stack is being shut down. All code paths go through if_detach_internal() where we, depending on the vmove flag or the vnet state, make a decision on how much to shut down; in case we are destroying a VNET the individual protocol layers will cleanup their own parts thus we cannot do so again for each interface as we end up with, e.g., double-frees, destroying locks twice or acquiring already destroyed locks. When calling into protocol cleanups we equally have to tell them whether they need to detach upper layer protocols ("ulp") or not (e.g., in6_ifdetach()). Provide or enahnce helper functions to do proper cleanup at a protocol rather than at an interface level. Approved by: re (hrs) Obtained from: projects/vnet Reviewed by: gnn, jhb Sponsored by: The FreeBSD Foundation MFC after: 2 weeks Differential Revision: https://reviews.freebsd.org/D6747
|
#
61eee0e2 |
|
24-Jan-2016 |
Alexander V. Chernikov <melifaro@FreeBSD.org> |
MFP r287070,r287073: split radix implementation and route table structure. There are number of radix consumers in kernel land (pf,ipfw,nfs,route) with different requirements. In fact, first 3 don't have _any_ requirements and first 2 does not use radix locking. On the other hand, routing structure do have these requirements (rnh_gen, multipath, custom to-be-added control plane functions, different locking). Additionally, radix should not known anything about its consumers internals. So, radix code now uses tiny 'struct radix_head' structure along with internal 'struct radix_mask_head' instead of 'struct radix_node_head'. Existing consumers still uses the same 'struct radix_node_head' with slight modifications: they need to pass pointer to (embedded) 'struct radix_head' to all radix callbacks. Routing code now uses new 'struct rib_head' with different locking macro: RADIX_NODE_HEAD prefix was renamed to RIB_ (which stands for routing information base). New net/route_var.h header was added to hold routing subsystem internal data. 'struct rib_head' was placed there. 'struct rtentry' will also be moved there soon.
|
#
10e0e235 |
|
14-Jan-2016 |
Alexander V. Chernikov <melifaro@FreeBSD.org> |
Remove now-unused wrappers for various routing functions.
|
#
d6e82913 |
|
17-Dec-2015 |
Steven Hartland <smh@FreeBSD.org> |
Revert r292275 & r292379 glebius has concerns about these changes so reverting those can be discussed and addressed. Sponsored by: Multiplay
|
#
52e53e2d |
|
15-Dec-2015 |
Steven Hartland <smh@FreeBSD.org> |
Fix lagg failover due to missing notifications When using lagg failover mode neither Gratuitous ARP (IPv4) or Unsolicited Neighbour Advertisements (IPv6) are sent to notify other nodes that the address may have moved. This results is slow failover, dropped packets and network outages for the lagg interface when the primary link goes down. We now use the new if_link_state_change_cond with the force param set to allow lagg to force through link state changes and hence fire a ifnet_link_event which are now monitored by rip and nd6. Upon receiving these events each protocol trigger the relevant notifications: * inet4 => Gratuitous ARP * inet6 => Unsolicited Neighbour Announce This also fixes the carp IPv6 NA's that stopped working after r251584 which added the ipv6_route__llma route. The new behavour can be controlled using the sysctls: * net.link.ether.inet.arp_on_link * net.inet6.icmp6.nd6_on_link Also removed unused param from lagg_port_state and added descriptions for the sysctls while here. PR: 156226 MFC after: 1 month Sponsored by: Multiplay Differential Revision: https://reviews.freebsd.org/D4111
|
#
33872124 |
|
05-Nov-2015 |
George V. Neville-Neil <gnn@FreeBSD.org> |
Replace the fastforward path with tryforward which does not require a sysctl and will always be on. The former split between default and fast forwarding is removed by this commit while preserving the ability to use all network stack features. Differential Revision: https://reviews.freebsd.org/D4042 Reviewed by: ae, melifaro, olivier, rwatson MFC after: 1 month Sponsored by: Rubicon Communications (Netgate)
|
#
f221bcaa |
|
17-Oct-2015 |
Alexander V. Chernikov <melifaro@FreeBSD.org> |
Remove several compat functions from pre-fib era.
|
#
cc0a3c8c |
|
29-Jul-2015 |
Andrey V. Elsukov <ae@FreeBSD.org> |
Convert in_ifaddr_lock and in6_ifaddr_lock to rmlock. Both are used to protect access to IP addresses lists and they can be acquired for reading several times per packet. To reduce lock contention it is better to use rmlock here. Reviewed by: gnn (previous version) Obtained from: Yandex LLC Sponsored by: Yandex LLC Differential Revision: https://reviews.freebsd.org/D3149
|
#
1dbefcc0 |
|
10-Apr-2015 |
Gleb Smirnoff <glebius@FreeBSD.org> |
Move all code related to IP fragment reassembly to ip_reass.c. Some function names have changed and comments are reformatted or added, but there is no functional change. Claim copyright for me and Adrian. Sponsored by: Nginx, Inc.
|
#
26d50672 |
|
19-Feb-2015 |
Gleb Smirnoff <glebius@FreeBSD.org> |
The last userland piece of in_var.h is now 'struct in_aliasreq'. Move it to the top of the file, and ifdef _KERNEL the rest.
|
#
e072c794 |
|
19-Feb-2015 |
Gleb Smirnoff <glebius@FreeBSD.org> |
Now that all users of _WANT_IFADDR are fixed, remove this crutch and hide ifaddr, in_ifaddr and in6_ifaddr under _KERNEL. Sponsored by: Netflix Sponsored by: Nginx, Inc.
|
#
0d159406 |
|
19-Feb-2015 |
Gleb Smirnoff <glebius@FreeBSD.org> |
- Rename 'struct igmp_ifinfo' into 'struct igmp_ifsoftc', since it really represents a context. - Preserve name 'struct igmp_ifinfo' for a new structure, that will be stable API between userland and kernel. - Make sysctl_igmp_ifinfo() return the new 'struct igmp_ifinfo', instead of old one, which had a bunch of internal kernel structures in it. - Move all above declarations from in_var.h to igmp_var.h, since they are private to IGMP code. Sponsored by: Netflix Sponsored by: Nginx, Inc.
|
#
fd1b2a7c |
|
18-Feb-2015 |
Gleb Smirnoff <glebius@FreeBSD.org> |
Widen _KERNEL ifdef to hide more kernel network stack structures from userland.
|
#
058e08be |
|
18-Feb-2015 |
Gleb Smirnoff <glebius@FreeBSD.org> |
Use new struct mbufq instead of struct ifqueue to manage packet queues in IPv4 multicast code. Sponsored by: Netflix Sponsored by: Nginx, Inc.
|
#
d82ed505 |
|
08-Dec-2014 |
Alexander V. Chernikov <melifaro@FreeBSD.org> |
Simplify lle lookup/create api by using addresses instead of sockaddrs.
|
#
8f465f66 |
|
22-Nov-2014 |
Alexander V. Chernikov <melifaro@FreeBSD.org> |
Convert &in_ifaddr_lock to dual-locking model: use rwlock accessible via external functions (IN_IFADDR_CFG_* -> in_ifaddr_cfg_*()) for all control plane tasks use rmlock (IN_IFADDR_RUN_*) for fast-path lookups.
|
#
670e8b3b |
|
10-Nov-2014 |
Alexander V. Chernikov <melifaro@FreeBSD.org> |
Kill custom in_matroute() radix mathing function removing one rte mutex lock. Initially in_matrote() in_clsroute() in their current state was introduced by r4105 20 years ago. Instead of deleting inactive routes immediately, we kept them in route table, setting RTPRF_OURS flag and some expire time. After that, either GC came or RTPRF_OURS got removed on first-packet. It was a good solution in that days (and probably another decade after that) to keep TCP metrics. However, after moving metrics to TCP hostcache in r122922, most of in_rmx functionality became unused. It might had been used for flushing icmp-originated routes before rte mutexes/refcounting, but I'm not sure about that. So it looks like this is nearly impossible to make GC do its work nowadays: in_rtkill() ignores non-RTPRF_OURS routes. route can only become RTPRF_OURS after dropping last reference via rtfree() which calls in_clsroute(), which, it turn, ignores UP and non-RTF_DYNAMIC routes. Dynamic routes can still be installed via received redirect, but they have default lifetime (no specific rt_expire) and no one has another trie walker to call RTFREE() on them. So, the changelist: * remove custom rnh_match / rnh_close matching function. * remove all GC functions * partially revert r256695 (proto3 is no more used inside kernel, it is not possible to use rt_expire from user point of view, proto3 support is not complete) * Finish r241884 (similar to this commit) and remove remaining IPv6 parts MFC after: 1 month
|
#
55e5eda6 |
|
08-Nov-2014 |
Alexander V. Chernikov <melifaro@FreeBSD.org> |
Separate radix and routing: use different structures for route and for other customers. Introduce new 'struct rib_head' for routing purposes and make all routing api use it.
|
#
930d2a42 |
|
06-Nov-2014 |
Alexander V. Chernikov <melifaro@FreeBSD.org> |
Remove legacy inet lookup functions.
|
#
b8bc95cd |
|
08-Sep-2014 |
Adrian Chadd <adrian@FreeBSD.org> |
Update the IPv4 input path to handle reassembled frames and incoming frames with no RSS hash. When doing RSS: * Create a new IPv4 netisr which expects the frames to have been verified; it just directly dispatches to the IPv4 input path. * Once IPv4 reassembly is done, re-calculate the RSS hash with the new IP and L3 header; then reinject it as appropriate. * Update the IPv4 netisr to be a CPU affinity netisr with the RSS hash function (rss_soft_m2cpuid) - this will do a software hash if the hardware doesn't provide one. NICs that don't implement hardware RSS hashing will now benefit from RSS distribution - it'll inject into the correct destination netisr. Note: the netisr distribution doesn't work out of the box - netisr doesn't query RSS for how many CPUs and the affinity setup. Yes, netisr likely shouldn't really be doing CPU stuff anymore and should be "some kind of 'thing' that is a workqueue that may or may not have any CPU affinity"; that's for a later commit. Differential Revision: https://reviews.freebsd.org/D527 Reviewed by: grehan
|
#
586904c2 |
|
01-Nov-2013 |
Gleb Smirnoff <glebius@FreeBSD.org> |
in_ifadown() can be void.
|
#
237bf7f7 |
|
01-Nov-2013 |
Gleb Smirnoff <glebius@FreeBSD.org> |
Cleanup in_ifscrub(), which is just an entry to in_scrubprefix().
|
#
8d7cf9b5 |
|
29-Oct-2013 |
Gleb Smirnoff <glebius@FreeBSD.org> |
Uninline inm_lookup_locked(). Now in_var.h doesn't dereference fields of struct ifnet. Sponsored by: Netflix Sponsored by: Nginx, Inc.
|
#
6ed910fa |
|
15-Oct-2013 |
Gleb Smirnoff <glebius@FreeBSD.org> |
Hide 'struct ifaddr' definition from userland. Two tools left that use it, namely ipftest(1) and ifmcstat(1). These sniff structure definition using _WANT_IFADDR define. Sponsored by: Netflix Sponsored by: Nginx, Inc.
|
#
f89d4c3a |
|
06-May-2013 |
Andre Oppermann <andre@FreeBSD.org> |
Back out r249318, r249320 and r249327 due to a heisenbug most likely related to a race condition in the ipi_hash_lock with the exact cause currently unknown but under investigation.
|
#
18ba072a |
|
10-Apr-2013 |
Gleb Smirnoff <glebius@FreeBSD.org> |
Fix build.
|
#
3c2824b9 |
|
10-Oct-2012 |
Alexander V. Chernikov <melifaro@FreeBSD.org> |
Do not check if found IPv4 rte is dynamic if net.inet.icmp.drop_redirect is enabled. This eliminates one mtx_lock() per each routing lookup thus improving performance in several cases (routing to directly connected interface or routing to default gateway). Icmp redirects should not be used to provide routing direction nowadays, even for end hosts. Routers should not use them too (and this is explicitly restricted in IPv6, see RFC 4861, clause 8.2). Current commit changes rnh_machaddr function to 'stock' rn_match (and back) for every AF_INET routing table in given VNET instance on drop_redirect sysctl change. This change is part of bigger patch eliminating rte locking. Sponsored by: Yandex LLC MFC after: 2 weeks
|
#
b9abeb9d |
|
18-Jul-2012 |
Gleb Smirnoff <glebius@FreeBSD.org> |
When traversing global in_ifaddr list in the IFP_TO_IA() macro, we need to obtain IN_IFADDR_RLOCK().
|
#
d2945360 |
|
08-Jan-2012 |
Gleb Smirnoff <glebius@FreeBSD.org> |
Provide IA_MASKSIN() macro similar to IA_SIN() and IA_DSTSIN().
|
#
137f91e8 |
|
05-Jan-2012 |
John Baldwin <jhb@FreeBSD.org> |
Convert all users of IF_ADDR_LOCK to use new locking macros that specify either a read lock or write lock. Reviewed by: bz MFC after: 2 weeks
|
#
08b68b0e |
|
15-Dec-2011 |
Gleb Smirnoff <glebius@FreeBSD.org> |
A major overhaul of the CARP implementation. The ip_carp.c was started from scratch, copying needed functionality from the old implemenation on demand, with a thorough review of all code. The main change is that interface layer has been removed from the CARP. Now redundant addresses are configured exactly on the interfaces, they run on. The CARP configuration itself is, as before, configured and read via SIOCSVH/SIOCGVH ioctls. A new prefix created with SIOCAIFADDR or SIOCAIFADDR_IN6 may now be configured to a particular virtual host id, which makes the prefix redundant. ifconfig(8) semantics has been changed too: now one doesn't need to clone carpXX interface, he/she should directly configure a vhid on a Ethernet interface. To supply vhid data from the kernel to an application the getifaddrs(8) function had been changed to pass ifam_data with each address. [1] The new implementation definitely closes all PRs related to carp(4) being an interface, and may close several others. It also allows to run a single redundant IP per interface. Big thanks to Bjoern Zeeb for his help with inet6 part of patch, for idea on using ifam_data and for several rounds of reviewing! PR: kern/117000, kern/126945, kern/126714, kern/120130, kern/117448 Reviewed by: bz Submitted by: bz [1]
|
#
b365d954 |
|
15-Oct-2011 |
Gleb Smirnoff <glebius@FreeBSD.org> |
Remove last remnants of classful addressing: - Remove ia_net, ia_netmask, ia_netbroadcast from struct in_ifaddr. - Remove net.inet.ip.subnetsarelocal, I bet no one need it in 2011. - fix bug when we were not forwarding to a host which matches classful net address. For example router having 192.168.x.y/16 network attached, would not forward traffic to 192.168.*.0, which are legal IPs in CIDR world. - For compatibility, leave autoguessing of mask based on class. Reviewed by: andre, bz, rwatson
|
#
5b84dc78 |
|
20-May-2011 |
Qing Li <qingli@FreeBSD.org> |
The statically configured (permanent) ARP entries are removed when an interface is brought down, even though the interface address is still valid. This patch maintains the permanent ARP entries as long as the interface address (having the same prefix as that of the ARP entries) is valid. Reviewed by: delphij MFC after: 5 days
|
#
a7d5f7eb |
|
19-Oct-2010 |
Jamie Gritton <jamie@FreeBSD.org> |
A new jail(8) with a configuration file, to replace the work currently done by /etc/rc.d/jail.
|
#
1e77c105 |
|
16-Jul-2009 |
Robert Watson <rwatson@FreeBSD.org> |
Remove unused VNET_SET() and related macros; only VNET_GET() is ever actually used. Rename VNET_GET() to VNET() to shorten variable references. Discussed with: bz, julian Reviewed by: bz Approved by: re (kensmith, kib)
|
#
eddfbb76 |
|
14-Jul-2009 |
Robert Watson <rwatson@FreeBSD.org> |
Build on Jeff Roberson's linker-set based dynamic per-CPU allocator (DPCPU), as suggested by Peter Wemm, and implement a new per-virtual network stack memory allocator. Modify vnet to use the allocator instead of monolithic global container structures (vinet, ...). This change solves many binary compatibility problems associated with VIMAGE, and restores ELF symbols for virtualized global variables. Each virtualized global variable exists as a "reference copy", and also once per virtual network stack. Virtualized global variables are tagged at compile-time, placing the in a special linker set, which is loaded into a contiguous region of kernel memory. Virtualized global variables in the base kernel are linked as normal, but those in modules are copied and relocated to a reserved portion of the kernel's vnet region with the help of a the kernel linker. Virtualized global variables exist in per-vnet memory set up when the network stack instance is created, and are initialized statically from the reference copy. Run-time access occurs via an accessor macro, which converts from the current vnet and requested symbol to a per-vnet address. When "options VIMAGE" is not compiled into the kernel, normal global ELF symbols will be used instead and indirection is avoided. This change restores static initialization for network stack global variables, restores support for non-global symbols and types, eliminates the need for many subsystem constructors, eliminates large per-subsystem structures that caused many binary compatibility issues both for monitoring applications (netstat) and kernel modules, removes the per-function INIT_VNET_*() macros throughout the stack, eliminates the need for vnet_symmap ksym(2) munging, and eliminates duplicate definitions of virtualized globals under VIMAGE_GLOBALS. Bump __FreeBSD_version and update UPDATING. Portions submitted by: bz Reviewed by: bz, zec Discussed with: gnn, jamie, jeff, jhb, julian, sam Suggested by: peter Approved by: re (kensmith)
|
#
64aeca7b |
|
25-Jun-2009 |
Robert Watson <rwatson@FreeBSD.org> |
Initialize in_ifaddr_lock using RW_SYSINIT() instead of in ip_init(), so that it doesn't run multiple times if VIMAGE is being used. Discussed with: bz MFC after: 6 weeks
|
#
2d9cfaba |
|
25-Jun-2009 |
Robert Watson <rwatson@FreeBSD.org> |
Add a new global rwlock, in_ifaddr_lock, which will synchronize use of the in_ifaddrhead and INADDR_HASH address lists. Previously, these lists were used unsynchronized as they were effectively never changed in steady state, but we've seen increasing reports of writer-writer races on very busy VPN servers as core count has gone up (and similar configurations where address lists change frequently and concurrently). For the time being, use rwlocks rather than rmlocks in order to take advantage of their better lock debugging support. As a result, we don't enable ip_input()'s read-locking of INADDR_HASH until an rmlock conversion is complete and a performance analysis has been done. This means that one class of reader-writer races still exists. MFC after: 6 weeks Reviewed by: bz
|
#
8c0fec80 |
|
23-Jun-2009 |
Robert Watson <rwatson@FreeBSD.org> |
Modify most routines returning 'struct ifaddr *' to return references rather than pointers, requiring callers to properly dispose of those references. The following routines now return references: ifaddr_byindex ifa_ifwithaddr ifa_ifwithbroadaddr ifa_ifwithdstaddr ifa_ifwithnet ifaof_ifpforaddr ifa_ifwithroute ifa_ifwithroute_fib rt_getifa rt_getifa_fib IFP_TO_IA ip_rtaddr in6_ifawithifp in6ifa_ifpforlinklocal in6ifa_ifpwithaddr in6_ifadd carp_iamatch6 ip6_getdstifaddr Remove unused macro which didn't have required referencing: IFP_TO_IA6 This closes many small races in which changes to interface or address lists while an ifaddr was in use could lead to use of freed memory (etc). In a few cases, add missing if_addr_list locking required to safely acquire references. Because of a lack of deep copying support, we accept a race in which an in6_ifaddr pointed to by mbuf tags and extracted with ip6_getdstifaddr() doesn't hold a reference while in transmit. Once we have mbuf tag deep copy support, this can be fixed. Reviewed by: bz Obtained from: Apple, Inc. (portions) MFC after: 6 weeks (portions)
|
#
573a04c9 |
|
09-May-2009 |
Warner Losh <imp@FreeBSD.org> |
Remove bogus comment.
|
#
582b6122 |
|
15-Apr-2009 |
Kip Macy <kmacy@FreeBSD.org> |
make LLTABLE visible to netinet
|
#
d10910e6 |
|
09-Mar-2009 |
Bruce M Simpson <bms@FreeBSD.org> |
Merge IGMPv3 and Source-Specific Multicast (SSM) to the FreeBSD IPv4 stack. Diffs are minimized against p4. PCS has been used for some protocol verification, more widespread testing of recorded sources in Group-and-Source queries is needed. sizeof(struct igmpstat) has changed. __FreeBSD_version is bumped to 800070.
|
#
6e6b3f7c |
|
14-Dec-2008 |
Qing Li <qingli@FreeBSD.org> |
This main goals of this project are: 1. separating L2 tables (ARP, NDP) from the L3 routing tables 2. removing as much locking dependencies among these layers as possible to allow for some parallelism in the search operations 3. simplify the logic in the routing code, The most notable end result is the obsolescent of the route cloning (RTF_CLONING) concept, which translated into code reduction in both IPv4 ARP and IPv6 NDP related modules, and size reduction in struct rtentry{}. The change in design obsoletes the semantics of RTF_CLONING, RTF_WASCLONE and RTF_LLINFO routing flags. The userland applications such as "arp" and "ndp" have been modified to reflect those changes. The output from "netstat -r" shows only the routing entries. Quite a few developers have contributed to this project in the past: Glebius Smirnoff, Luigi Rizzo, Alessandro Cerri, and Andre Oppermann. And most recently: - Kip Macy revised the locking code completely, thus completing the last piece of the puzzle, Kip has also been conducting active functional testing - Sam Leffler has helped me improving/refactoring the code, and provided valuable reviews - Julian Elischer setup the perforce tree for me and has helped me maintaining that branch before the svn conversion
|
#
1b193af6 |
|
13-Dec-2008 |
Bjoern A. Zeeb <bz@FreeBSD.org> |
Second round of putting global variables, which were virtualized but formerly missed under VIMAGE_GLOBAL. Put the extern declarations of the virtualized globals under VIMAGE_GLOBAL as the globals themsevles are already. This will help by the time when we are going to remove the globals entirely. Sponsored by: The FreeBSD Foundation
|
#
44e33a07 |
|
19-Nov-2008 |
Marko Zec <zec@FreeBSD.org> |
Change the initialization methodology for global variables scheduled for virtualization. Instead of initializing the affected global variables at instatiation, assign initial values to them in initializer functions. As a rule, initialization at instatiation for such variables should never be introduced again from now on. Furthermore, enclose all instantiations of such global variables in #ifdef VIMAGE_GLOBALS blocks. Essentialy, this change should have zero functional impact. In the next phase of merging network stack virtualization infrastructure from p4/vimage branch, the new initialization methology will allow us to switch between using global variables and their counterparts residing in virtualization containers with minimum code churn, and in the long run allow us to intialize multiple instances of such container structures. Discussed at: devsummit Strassburg Reviewed by: bz, julian Approved by: julian (mentor) Obtained from: //depot/projects/vimage-commit2/... X-MFC after: never Sponsored by: NLnet Foundation, The FreeBSD Foundation
|
#
d7f03759 |
|
19-Oct-2008 |
Ulf Lilleengen <lulf@FreeBSD.org> |
- Import the HEAD csup code which is the basis for the cvsmode work.
|
#
93fcb5a2 |
|
14-Sep-2008 |
Julian Elischer <julian@FreeBSD.org> |
Revert a part of the MRT commit that proved un-needed. rt_check() in its original form proved to be sufficient and rt_check_fib() can go away (as can its evil twin in_rt_check()). I believe this does NOT address the crashes people have been seeing in rt_check. MFC after: 1 week
|
#
603724d3 |
|
17-Aug-2008 |
Bjoern A. Zeeb <bz@FreeBSD.org> |
Commit step 1 of the vimage project, (network stack) virtualization work done by Marko Zec (zec@). This is the first in a series of commits over the course of the next few weeks. Mark all uses of global variables to be virtualized with a V_ prefix. Use macros to map them back to their global names for now, so this is a NOP change only. We hope to have caught at least 85-90% of what is needed so we do not invalidate a lot of outstanding patches again. Obtained from: //depot/projects/vimage-commit2/... Reviewed by: brooks, des, ed, mav, julian, jamie, kris, rwatson, zec, ... (various people I forgot, different versions) md5 (with a bit of help) Sponsored by: NLnet Foundation, The FreeBSD Foundation X-MFC after: never V_Commit_Message_Reviewed_By: more people than the patch
|
#
8b07e49a |
|
09-May-2008 |
Julian Elischer <julian@FreeBSD.org> |
Add code to allow the system to handle multiple routing tables. This particular implementation is designed to be fully backwards compatible and to be MFC-able to 7.x (and 6.x) Currently the only protocol that can make use of the multiple tables is IPv4 Similar functionality exists in OpenBSD and Linux. From my notes: ----- One thing where FreeBSD has been falling behind, and which by chance I have some time to work on is "policy based routing", which allows different packet streams to be routed by more than just the destination address. Constraints: ------------ I want to make some form of this available in the 6.x tree (and by extension 7.x) , but FreeBSD in general needs it so I might as well do it in -current and back port the portions I need. One of the ways that this can be done is to have the ability to instantiate multiple kernel routing tables (which I will now refer to as "Forwarding Information Bases" or "FIBs" for political correctness reasons). Which FIB a particular packet uses to make the next hop decision can be decided by a number of mechanisms. The policies these mechanisms implement are the "Policies" referred to in "Policy based routing". One of the constraints I have if I try to back port this work to 6.x is that it must be implemented as a EXTENSION to the existing ABIs in 6.x so that third party applications do not need to be recompiled in timespan of the branch. This first version will not have some of the bells and whistles that will come with later versions. It will, for example, be limited to 16 tables in the first commit. Implementation method, Compatible version. (part 1) ------------------------------- For this reason I have implemented a "sufficient subset" of a multiple routing table solution in Perforce, and back-ported it to 6.x. (also in Perforce though not always caught up with what I have done in -current/P4). The subset allows a number of FIBs to be defined at compile time (8 is sufficient for my purposes in 6.x) and implements the changes needed to allow IPV4 to use them. I have not done the changes for ipv6 simply because I do not need it, and I do not have enough knowledge of ipv6 (e.g. neighbor discovery) needed to do it. Other protocol families are left untouched and should there be users with proprietary protocol families, they should continue to work and be oblivious to the existence of the extra FIBs. To understand how this is done, one must know that the current FIB code starts everything off with a single dimensional array of pointers to FIB head structures (One per protocol family), each of which in turn points to the trie of routes available to that family. The basic change in the ABI compatible version of the change is to extent that array to be a 2 dimensional array, so that instead of protocol family X looking at rt_tables[X] for the table it needs, it looks at rt_tables[Y][X] when for all protocol families except ipv4 Y is always 0. Code that is unaware of the change always just sees the first row of the table, which of course looks just like the one dimensional array that existed before. The entry points rtrequest(), rtalloc(), rtalloc1(), rtalloc_ign() are all maintained, but refer only to the first row of the array, so that existing callers in proprietary protocols can continue to do the "right thing". Some new entry points are added, for the exclusive use of ipv4 code called in_rtrequest(), in_rtalloc(), in_rtalloc1() and in_rtalloc_ign(), which have an extra argument which refers the code to the correct row. In addition, there are some new entry points (currently called rtalloc_fib() and friends) that check the Address family being looked up and call either rtalloc() (and friends) if the protocol is not IPv4 forcing the action to row 0 or to the appropriate row if it IS IPv4 (and that info is available). These are for calling from code that is not specific to any particular protocol. The way these are implemented would change in the non ABI preserving code to be added later. One feature of the first version of the code is that for ipv4, the interface routes show up automatically on all the FIBs, so that no matter what FIB you select you always have the basic direct attached hosts available to you. (rtinit() does this automatically). You CAN delete an interface route from one FIB should you want to but by default it's there. ARP information is also available in each FIB. It's assumed that the same machine would have the same MAC address, regardless of which FIB you are using to get to it. This brings us as to how the correct FIB is selected for an outgoing IPV4 packet. Firstly, all packets have a FIB associated with them. if nothing has been done to change it, it will be FIB 0. The FIB is changed in the following ways. Packets fall into one of a number of classes. 1/ locally generated packets, coming from a socket/PCB. Such packets select a FIB from a number associated with the socket/PCB. This in turn is inherited from the process, but can be changed by a socket option. The process in turn inherits it on fork. I have written a utility call setfib that acts a bit like nice.. setfib -3 ping target.example.com # will use fib 3 for ping. It is an obvious extension to make it a property of a jail but I have not done so. It can be achieved by combining the setfib and jail commands. 2/ packets received on an interface for forwarding. By default these packets would use table 0, (or possibly a number settable in a sysctl(not yet)). but prior to routing the firewall can inspect them (see below). (possibly in the future you may be able to associate a FIB with packets received on an interface.. An ifconfig arg, but not yet.) 3/ packets inspected by a packet classifier, which can arbitrarily associate a fib with it on a packet by packet basis. A fib assigned to a packet by a packet classifier (such as ipfw) would over-ride a fib associated by a more default source. (such as cases 1 or 2). 4/ a tcp listen socket associated with a fib will generate accept sockets that are associated with that same fib. 5/ Packets generated in response to some other packet (e.g. reset or icmp packets). These should use the FIB associated with the packet being reponded to. 6/ Packets generated during encapsulation. gif, tun and other tunnel interfaces will encapsulate using the FIB that was in effect withthe proces that set up the tunnel. thus setfib 1 ifconfig gif0 [tunnel instructions] will set the fib for the tunnel to use to be fib 1. Routing messages would be associated with their process, and thus select one FIB or another. messages from the kernel would be associated with the fib they refer to and would only be received by a routing socket associated with that fib. (not yet implemented) In addition Netstat has been edited to be able to cope with the fact that the array is now 2 dimensional. (It looks in system memory using libkvm (!)). Old versions of netstat see only the first FIB. In addition two sysctls are added to give: a) the number of FIBs compiled in (active) b) the default FIB of the calling process. Early testing experience: ------------------------- Basically our (IronPort's) appliance does this functionality already using ipfw fwd but that method has some drawbacks. For example, It can't fully simulate a routing table because it can't influence the socket's choice of local address when a connect() is done. Testing during the generating of these changes has been remarkably smooth so far. Multiple tables have co-existed with no notable side effects, and packets have been routes accordingly. ipfw has grown 2 new keywords: setfib N ip from anay to any count ip from any to any fib N In pf there seems to be a requirement to be able to give symbolic names to the fibs but I do not have that capacity. I am not sure if it is required. SCTP has interestingly enough built in support for this, called VRFs in Cisco parlance. it will be interesting to see how that handles it when it suddenly actually does something. Where to next: -------------------- After committing the ABI compatible version and MFCing it, I'd like to proceed in a forward direction in -current. this will result in some roto-tilling in the routing code. Firstly: the current code's idea of having a separate tree per protocol family, all of the same format, and pointed to by the 1 dimensional array is a bit silly. Especially when one considers that there is code that makes assumptions about every protocol having the same internal structures there. Some protocols don't WANT that sort of structure. (for example the whole idea of a netmask is foreign to appletalk). This needs to be made opaque to the external code. My suggested first change is to add routing method pointers to the 'domain' structure, along with information pointing the data. instead of having an array of pointers to uniform structures, there would be an array pointing to the 'domain' structures for each protocol address domain (protocol family), and the methods this reached would be called. The methods would have an argument that gives FIB number, but the protocol would be free to ignore it. When the ABI can be changed it raises the possibilty of the addition of a fib entry into the "struct route". Currently, the structure contains the sockaddr of the desination, and the resulting fib entry. To make this work fully, one could add a fib number so that given an address and a fib, one can find the third element, the fib entry. Interaction with the ARP layer/ LL layer would need to be revisited as well. Qing Li has been working on this already. This work was sponsored by Ironport Systems/Cisco Reviewed by: several including rwatson, bz and mlair (parts each) Obtained from: Ironport systems/Cisco
|
#
71498f30 |
|
12-Jun-2007 |
Bruce M Simpson <bms@FreeBSD.org> |
Import rewrite of IPv4 socket multicast layer to support source-specific and protocol-independent host mode multicast. The code is written to accomodate IPv6, IGMPv3 and MLDv2 with only a little additional work. This change only pertains to FreeBSD's use as a multicast end-station and does not concern multicast routing; for an IGMPv3/MLDv2 router implementation, consider the XORP project. The work is based on Wilbert de Graaf's IGMPv3 code drop for FreeBSD 4.6, which is available at: http://www.kloosterhof.com/wilbert/igmpv3.html Summary * IPv4 multicast socket processing is now moved out of ip_output.c into a new module, in_mcast.c. * The in_mcast.c module implements the IPv4 legacy any-source API in terms of the protocol-independent source-specific API. * Source filters are lazy allocated as the common case does not use them. They are part of per inpcb state and are covered by the inpcb lock. * struct ip_mreqn is now supported to allow applications to specify multicast joins by interface index in the legacy IPv4 any-source API. * In UDP, an incoming multicast datagram only requires that the source port matches the 4-tuple if the socket was already bound by source port. An unbound socket SHOULD be able to receive multicasts sent from an ephemeral source port. * The UDP socket multicast filter mode defaults to exclusive, that is, sources present in the per-socket list will be blocked from delivery. * The RFC 3678 userland functions have been added to libc: setsourcefilter, getsourcefilter, setipv4sourcefilter, getipv4sourcefilter. * Definitions for IGMPv3 are merged but not yet used. * struct sockaddr_storage is now referenced from <netinet/in.h>. It is therefore defined there if not already declared in the same way as for the C99 types. * The RFC 1724 hack (specify 0.0.0.0/8 addresses to IP_MULTICAST_IF which are then interpreted as interface indexes) is now deprecated. * A patch for the Rhyolite.com routed in the FreeBSD base system is available in the -net archives. This only affects individuals running RIPv1 or RIPv2 via point-to-point and/or unnumbered interfaces. * Make IPv6 detach path similar to IPv4's in code flow; functionally same. * Bump __FreeBSD_version to 700048; see UPDATING. This work was financially supported by another FreeBSD committer. Obtained from: p4://bms_netdev Submitted by: Wilbert de Graaf (original work) Reviewed by: rwatson (locking), silence from fenner, net@ (but with encouragement)
|
#
ec002fee |
|
19-Mar-2007 |
Bruce M Simpson <bms@FreeBSD.org> |
Implement reference counting for ifmultiaddr, in_multi, and in6_multi structures. Detect when ifnet instances are detached from the network stack and perform appropriate cleanup to prevent memory leaks. This has been implemented in such a way as to be backwards ABI compatible. Kernel consumers are changed to use if_delmulti_ifma(); in_delmulti() is unable to detect interface removal by design, as it performs searches on structures which are removed with the interface. With this architectural change, the panics FreeBSD users have experienced with carp and pfsync should be resolved. Obtained from: p4 branch bms_netdev Reviewed by: andre Sponsored by: Garance A Drosehn Idea from: NetBSD MFC after: 1 month
|
#
d9668414 |
|
28-Sep-2006 |
Bruce M Simpson <bms@FreeBSD.org> |
The IPv4 code should clean up multicast group state when an interface goes away. Without this change, it leaks in_multi (and often ether_multi state) if many clonable interfaces are created and destroyed in quick succession. The concept of this fix is borrowed from KAME. Detailed information about this behaviour, as well as test cases, are available in the PR. PR: kern/78227 MFC after: 1 week
|
#
e2fd806b |
|
25-Sep-2006 |
Bruce M Simpson <bms@FreeBSD.org> |
Spleling Submitted by: pjd
|
#
07ea6709 |
|
25-Sep-2006 |
Bruce M Simpson <bms@FreeBSD.org> |
Account for output IP datagrams on the ifaddr where they originated from, *not* the first ifaddr on the ifp. This is similar to what NetBSD does. PR: kern/72936 Submitted by: alfred Reviewed by: andre
|
#
5d691e6d |
|
18-Jan-2006 |
Andre Oppermann <andre@FreeBSD.org> |
Return mbuf pointer or NULL from ip_fastforward() as the mbuf pointer may have changed by m_pullup() during fastforward processing. While this is a bug it is actually never triggered in real world situations and it is not remotely exploitable. Found by: Coverity Prevent(tm) Coverity ID: CID780 Sponsored by: TCP/IP Optimization Fundraise 2005
|
#
dd5a318b |
|
03-Aug-2005 |
Robert Watson <rwatson@FreeBSD.org> |
Introduce in_multi_mtx, which will protect IPv4-layer multicast address lists, as well as accessor macros. For now, this is a recursive mutex due code sequences where IPv4 multicast calls into IGMP calls into ip_output(), which then tests for a multicast forwarding case. For support macros in in_var.h to check multicast address lists, assert that in_multi_mtx is held. Acquire in_multi_mtx around iteration over the IPv4 multicast address lists, such as in ip_input() and ip_output(). Acquire in_multi_mtx when manipulating the IPv4 layer multicast addresses, as well as over the manipulation of ifnet multicast address lists in order to keep the two layers in sync. Lock down accesses to IPv4 multicast addresses in IGMP, or assert the lock when performing IGMP join/leave events. Eliminate spl's associated with IPv4 multicast addresses, portions of IGMP that weren't previously expunged by IGMP locking. Add in_multi_mtx, igmp_mtx, and if_addr_mtx lock order to hard-coded lock order in WITNESS, in that order. Problem reported by: Ed Maste <emaste at phaedrus dot sandvine dot ca> MFC after: 10 days
|
#
bccb4101 |
|
02-Aug-2005 |
Robert Watson <rwatson@FreeBSD.org> |
Modify network protocol consumers of the ifnet multicast address lists to lock if_addr_mtx. Problem reported by: Ed Maste <emaste at phaedrus dot sandvine dot ca> MFC after: 1 week
|
#
c398230b |
|
06-Jan-2005 |
Warner Losh <imp@FreeBSD.org> |
/* -> /*- for license, minor formatting changes
|
#
969bb53e |
|
19-Oct-2004 |
Andre Oppermann <andre@FreeBSD.org> |
Properly declare the "net.inet" sysctl subtree.
|
#
a4f757cd |
|
16-Aug-2004 |
Robert Watson <rwatson@FreeBSD.org> |
White space cleanup for netinet before branch: - Trailing tab/space cleanup - Remove spurious spaces between or before tabs This change avoids touching files that Andre likely has in his working set for PFIL hooks changes for IPFW/DUMMYNET. Approved by: re (scottl) Submitted by: Xin LI <delphij@frontfree.net>
|
#
f36cfd49 |
|
07-Apr-2004 |
Warner Losh <imp@FreeBSD.org> |
Remove advertising clause from University of California Regent's license, per letter dated July 22, 1999 and email from Peter Wemm, Alan Cox and Robert Watson. Approved by: core, peter, alc, rwatson
|
#
846840ba |
|
09-Mar-2004 |
Robert Watson <rwatson@FreeBSD.org> |
Scrub unused variable zeroin_addr.
|
#
9188b4a1 |
|
14-Nov-2003 |
Andre Oppermann <andre@FreeBSD.org> |
Introduce ip_fastforward and remove ip_flow. Short description of ip_fastforward: o adds full direct process-to-completion IPv4 forwarding code o handles ip fragmentation incl. hw support (ip_flow did not) o sends icmp needfrag to source if DF is set (ip_flow did not) o supports ipfw and ipfilter (ip_flow did not) o supports divert, ipfw fwd and ipfilter nat (ip_flow did not) o returns anything it can't handle back to normal ip_input Enable with sysctl -w net.inet.ip.fastforwarding=1 Reviewed by: sam (mentor)
|
#
6c4b2ad3 |
|
20-Aug-2003 |
Robert Watson <rwatson@FreeBSD.org> |
Move from a custom-crafted singly-linked list to the SLIST_* macros from queue(3). Improve vertical compactness by using a IGMP_PRINTF() macro rather than #ifdefing IGMP_DEBUG a large number of debugging printfs. Reviewed by: mdodd (SLIST changes)
|
#
1cafed39 |
|
04-Mar-2003 |
Jonathan Lemon <jlemon@FreeBSD.org> |
Update netisr handling; Each SWI now registers its queue, and all queue drain routines are done by swi_net, which allows for better queue control at some future point. Packets may also be directly dispatched to a netisr instead of queued, this may be of interest at some installations, but currently defaults to off. Reviewed by: hsu, silby, jayanth, sam Sponsored by: DARPA, NAI Labs
|
#
c1cd65ba |
|
24-Mar-2002 |
Bruce Evans <bde@FreeBSD.org> |
Fixed some style bugs in the removal of __P(()). Continuation lines were not outdented to preserve non-KNF lining up of code with parentheses. Switch to KNF formatting.
|
#
4d77a549 |
|
19-Mar-2002 |
Alfred Perlstein <alfred@FreeBSD.org> |
Remove __P.
|
#
01a5f190 |
|
29-Sep-2001 |
Jonathan Lemon <jlemon@FreeBSD.org> |
Nuke unused (and incorrect) #define of INADDR_HMASK. Spotted by: ru
|
#
a931d7ed |
|
29-Sep-2001 |
Jonathan Lemon <jlemon@FreeBSD.org> |
Make the INADDR_TO_IFP macro use the IP address hash lookup instead of walking the entire list of IP addresses. Pointed out by: bfumerola
|
#
ca925d9c |
|
28-Sep-2001 |
Jonathan Lemon <jlemon@FreeBSD.org> |
Add a hash table that contains the list of internet addresses, and use this in place of the in_ifaddr list when appropriate. This improves performance on hosts which have a large number of IP aliases.
|
#
b40ce416 |
|
12-Sep-2001 |
Julian Elischer <julian@FreeBSD.org> |
KSE Milestone 2 Note ALL MODULES MUST BE RECOMPILED make the kernel aware that there are smaller units of scheduling than the process. (but only allow one thread per process at this time). This is functionally equivalent to teh previousl -current except that there is a thread associated with each process. Sorry john! (your next MFC will be a doosie!) Reviewed by: peter@freebsd.org, dillon@freebsd.org X-MFC after: ha ha ha ha
|
#
9f81cc84 |
|
17-Jul-2001 |
Ruslan Ermilov <ru@FreeBSD.org> |
Backout damage to the INADDR_TO_IFP() macro in revision 1.7. This macro was supposed to only match local IP addresses of interfaces, and all consumers of this macro assume this as well. (See IP_MULTICAST_IF and IP_ADD_MEMBERSHIP socket options in the ip(4) manpage.) This fixes a major security breach in IPFW-based firewalls where the `me' keyword would match the other end of a P2P link. PR: kern/28567
|
#
91854268 |
|
11-May-2001 |
Ruslan Ermilov <ru@FreeBSD.org> |
In in_ifadown(), differentiate between whether the interface goes down or interface address is deleted. Only delete static routes in the latter case. Reported by: Alexander Leidinger <Alexander@leidinger.net>
|
#
6817526d |
|
06-Feb-2001 |
Poul-Henning Kamp <phk@FreeBSD.org> |
Convert if_multiaddrs from LIST to TAILQ so that it can be traversed backwards in the three drivers which want to do that. Reviewed by: mikeh
|
#
ef9e85ab |
|
03-Feb-2001 |
Poul-Henning Kamp <phk@FreeBSD.org> |
Use <sys/queue.h> macro API.
|
#
e3975643 |
|
25-May-2000 |
Jake Burkholder <jake@FreeBSD.org> |
Back out the previous change to the queue(3) interface. It was not discussed and should probably not happen. Requested by: msmith and others
|
#
740a1973 |
|
23-May-2000 |
Jake Burkholder <jake@FreeBSD.org> |
Change the way that the queue(3) structures are declared; don't assume that the type argument to *_HEAD and *_ENTRY is a struct. Suggested by: phk Reviewed by: phk Approved by: mdodd
|
#
664a31e4 |
|
28-Dec-1999 |
Peter Wemm <peter@FreeBSD.org> |
Change #ifdef KERNEL to #ifdef _KERNEL in the public headers. "KERNEL" is an application space macro and the applications are supposed to be free to use it as they please (but cannot). This is consistant with the other BSD's who made this change quite some time ago. More commits to come.
|
#
76429de4 |
|
05-Nov-1999 |
Yoshinobu Inoue <shin@FreeBSD.org> |
KAME related header files additions and merges. (only those which don't affect c source files so much) Reviewed by: cvs-committers Obtained from: KAME project
|
#
c3aac50f |
|
27-Aug-1999 |
Peter Wemm <peter@FreeBSD.org> |
$Id$ -> $FreeBSD$
|
#
ce02431f |
|
16-Feb-1999 |
Doug Rabson <dfr@FreeBSD.org> |
* Change sysctl from using linker_set to construct its tree using SLISTs. This makes it possible to change the sysctl tree at runtime. * Change KLD to find and register any sysctl nodes contained in the loaded file and to unregister them when the file is unloaded. Reviewed by: Archie Cobbs <archie@whistle.com>, Peter Wemm <peter@netplex.com.au> (well they looked at it anyway)
|
#
ecbb00a2 |
|
07-Jun-1998 |
Doug Rabson <dfr@FreeBSD.org> |
This commit fixes various 64bit portability problems required for FreeBSD/alpha. The most significant item is to change the command argument to ioctl functions from int to u_long. This change brings us inline with various other BSD versions. Driver writers may like to use (__FreeBSD_version == 300003) to detect this change. The prototype FreeBSD/alpha machdep will follow in a couple of days time.
|
#
1f91d8c5 |
|
19-May-1998 |
David Greenman <dg@FreeBSD.org> |
Added fast IP forwarding code by Matt Thomas <matt@3am-software.com> via NetBSD, ported to FreeBSD by Pierre Beyssac <pb@fasterix.freenix.org> and minorly tweaked by me. This is a standard part of FreeBSD, but must be enabled with: "sysctl -w net.inet.ip.fastforwarding=1" ...and of course forwarding must also be enabled. This should probably be modified to use the zone allocator for speed and space efficiency. The current algorithm also appears to lose if the number of active paths exceeds IPFLOW_MAX (256), in which case it wastes lots of time trying to figure out which cache entry to drop.
|
#
bea0f0be |
|
06-Sep-1997 |
Bruce Evans <bde@FreeBSD.org> |
Some staticized variables were still declared to be extern.
|
#
a29f300e |
|
27-Apr-1997 |
Garrett Wollman <wollman@FreeBSD.org> |
The long-awaited mega-massive-network-code- cleanup. Part I. This commit includes the following changes: 1) Old-style (pr_usrreq()) protocols are no longer supported, the compatibility glue for them is deleted, and the kernel will panic on boot if any are compiled in. 2) Certain protocol entry points are modified to take a process structure, so they they can easily tell whether or not it is possible to sleep, and also to access credentials. 3) SS_PRIV is no more, and with it goes the SO_PRIVSTATE setsockopt() call. Protocols should use the process pointer they are now passed. 4) The PF_LOCAL and PF_ROUTE families have been updated to use the new style, as has the `raw' skeleton family. 5) PF_LOCAL sockets now obey the process's umask when creating a socket in the filesystem. As a result, LINT is now broken. I'm hoping that some enterprising hacker with a bit more time will either make the broken bits work (should be easy for netipx) or dike them out.
|
#
6875d254 |
|
22-Feb-1997 |
Peter Wemm <peter@FreeBSD.org> |
Back out part 1 of the MCFH that changed $Id$ to $FreeBSD$. We are not ready for it yet.
|
#
117bcae7 |
|
18-Feb-1997 |
Garrett Wollman <wollman@FreeBSD.org> |
Convert raw IP from mondo-switch-statement-from-Hell to pr_usrreqs. Collapse duplicates with udp_usrreq.c and tcp_usrreq.c (calling the generic routines in uipc_socket2.c and in_pcb.c). Calling sockaddr()_ or peeraddr() on a detached socket now traps, rather than harmlessly returning an error; this should never happen. Allow the raw IP buffer sizes to be controlled via sysctl.
|
#
39191c8e |
|
13-Feb-1997 |
Garrett Wollman <wollman@FreeBSD.org> |
Provide PRC_IFDOWN and PRC_IFUP support for IP. Now, when an interface is administratively downed, all routes to that interface (including the interface route itself) which are not static will be deleted. When it comes back up, and addresses remaining will have their interface routes re-added. This solves the problem where, for example, an Ethernet interface is downed by traffic continues to flow by way of ARP entries.
|
#
93e808cd |
|
21-Jan-1997 |
Garrett Wollman <wollman@FreeBSD.org> |
Who had the conical hat? Correct a typo, hidden by a bad cast, which prevented IP multicast reception from happening.
|
#
1130b656 |
|
14-Jan-1997 |
Jordan K. Hubbard <jkh@FreeBSD.org> |
Make the long-awaited change from $Id$ to $FreeBSD$ This will make a number of things easier in the future, as well as (finally!) avoiding the Id-smashing problem which has plagued developers for so long. Boy, I'm glad we're not using sup anymore. This update would have been insane otherwise.
|
#
477180fb |
|
13-Jan-1997 |
Garrett Wollman <wollman@FreeBSD.org> |
Use the new if_multiaddrs list for multicast addresses rather than the previous hackery involving struct in_ifaddr and arpcom. Get rid of the abominable multi_kludge. Update all network interfaces to use the new machanism. Distressingly few Ethernet drivers program the multicast filter properly (assuming the hardware has one, which it usually does).
|
#
771f0216 |
|
15-Dec-1996 |
Garrett Wollman <wollman@FreeBSD.org> |
Somehow the removal of ia_next didn't make it in the last time. Hope it makes it in this time, and remember not to commit changes next time late on a Friday evening!
|
#
59562606 |
|
13-Dec-1996 |
Garrett Wollman <wollman@FreeBSD.org> |
Convert the interface address and IP interface address structures to TAILQs. Fix places which referenced these for no good reason that I can see (the references remain, but were fixed to compile again; they are still questionable).
|
#
49fa849b |
|
14-Mar-1996 |
Bill Fenner <fenner@FreeBSD.org> |
IGMPv2 routines rewritten, to be more compact and to fully comply with the IGMPv2 Internet Draft (including Router Alert IP option)
|
#
c67b1d17 |
|
05-Feb-1996 |
Garrett Wollman <wollman@FreeBSD.org> |
Provide a direct entry point for IP input. This actually results in a slight decrease in performance, but will lead to better performance later.
|
#
ce00153c |
|
09-Jan-1996 |
David Greenman <dg@FreeBSD.org> |
Fix logic bug (!= should be ==) in recent P2P/multicast kludge. Reviewed by: Bill Fenner <fenner@parc.xerox.com> Submitted by: Dave Marquardt <marquard@austin.ibm.com>
|
#
33d06b43 |
|
03-Jan-1996 |
Garrett Wollman <wollman@FreeBSD.org> |
Try to make multicast routing work correctly over point-to-point links (which was broken previously by the support for half-routers). Submitted by: Bill Fenner <fenner@parc.xerox.com>
|
#
ce29ab3a |
|
19-Dec-1995 |
Garrett Wollman <wollman@FreeBSD.org> |
Actually call in_rtqdrain()as was originally intended.
|
#
0312fbe9 |
|
14-Nov-1995 |
Poul-Henning Kamp <phk@FreeBSD.org> |
New style sysctl & staticize alot of stuff.
|
#
2180b925 |
|
21-Sep-1995 |
Garrett Wollman <wollman@FreeBSD.org> |
Merge with 4.4-Lite-2. This is actually a 64-bit fix; the second parameter to in_control() is sometimes a pointer, and sometimes an integer, so use u_long rather than int. Obtained from: 4.4BSD-Lite-2
|
#
efe4b0eb |
|
21-Sep-1995 |
Garrett Wollman <wollman@FreeBSD.org> |
Second try: get 4.4-Lite-2 into the source tree. The conflicts don't matter because none of our working source files are on the CSRG branch any more. Obtained from: 4.4BSD-Lite-2
|
#
9b2e5354 |
|
30-May-1995 |
Rodney W. Grimes <rgrimes@FreeBSD.org> |
Remove trailing whitespace.
|
#
ffa5b11a |
|
23-Mar-1995 |
Garrett Wollman <wollman@FreeBSD.org> |
in_var.h: in_multi structures now form a queue(3)-style LIST structure in.c: when an interface address is deleted, keep its multicast membership . records (attached to a struct multi_kludge) for attachment to the . next address on the same interface. Also, in_multi structures now . gain a reference to the ifaddr so that they won't point off into . freed memory if an interface goes away and doesn't come back before . the last socket reference drops. This is analogous to how it is . done for routes, and seems to make the most sense.
|
#
b5e8ce9f |
|
16-Mar-1995 |
Bruce Evans <bde@FreeBSD.org> |
Add and move declarations to fix all of the warnings from `gcc -Wimplicit' (except in netccitt, netiso and netns) and most of the warnings from `gcc -Wnested-externs'. Fix all the bugs found. There were no serious ones.
|
#
1bc8a809 |
|
25-Oct-1994 |
Steven Wallace <swallace@FreeBSD.org> |
Patch for proper multicast support on point-to-point links. Submitted by: apg@demos.su (Paul Antonov) - patch020
|
#
f0068c4a |
|
06-Sep-1994 |
Garrett Wollman <wollman@FreeBSD.org> |
Initial get-the-easy-case-working upgrade of the multicast code to something more recent than the ancient 1.2 release contained in 4.4. This code has the following advantages as compared to previous versions (culled from the README file for the SunOS release): - True multicast delivery - Configurable rate-limiting of forwarded multicast traffic on each physical interface or tunnel, using a token-bucket limiter. - Simplistic classification of packets for prioritized dropping. - Administrative scoping of multicast address ranges. - Faster detection of hosts leaving groups. - Support for multicast traceroute (code not yet available). - Support for RSVP, the Resource Reservation Protocol. What still needs to be done: - The multicast forwarder needs testing. - The multicast routing daemon needs to be ported. - Network interface drivers need to have the `#ifdef MULTICAST' goop ripped out of them. - The IGMP code should probably be bogon-tested. Some notes about the porting process: In some cases, the Berkeley people decided to incorporate functionality from later releases of the multicast code, but then had to do things differently. As a result, if you look at Deering's patches, and then look at our code, it is not always obvious whether the patch even applies. Let the reader beware. I ran ip_mroute.c through several passes of `unifdef' to get rid of useless grot, and to permanently enable the RSVP support, which we will include as standard. Ported by: Garrett Wollman Submitted by: Steve Deering and Ajit Thyagarajan (among others)
|
#
707f139e |
|
20-Aug-1994 |
Paul Richards <paul@FreeBSD.org> |
Made idempotent. Submitted by: Paul
|
#
f23b4c91 |
|
18-Aug-1994 |
Garrett Wollman <wollman@FreeBSD.org> |
Fix up some sloppy coding practices: - Delete redundant declarations. - Add -Wredundant-declarations to Makefile.i386 so they don't come back. - Delete sloppy COMMON-style declarations of uninitialized data in header files. - Add a few prototypes. - Clean up warnings resulting from the above. NB: ioconf.c will still generate a redundant-declaration warning, which is unavoidable unless somebody volunteers to make `config' smarter.
|
#
3c4dd356 |
|
02-Aug-1994 |
David Greenman <dg@FreeBSD.org> |
Added $Id$
|
#
26f9a767 |
|
25-May-1994 |
Rodney W. Grimes <rgrimes@FreeBSD.org> |
The big 4.4BSD Lite to FreeBSD 2.0.0 (Development) patch. Reviewed by: Rodney W. Grimes Submitted by: John Dyson and David Greenman
|
#
df8bae1d |
|
24-May-1994 |
Rodney W. Grimes <rgrimes@FreeBSD.org> |
BSD 4.4 Lite Kernel Sources
|