sys: Remove $FreeBSD$: two-line .h pattern

Remove /^\s*\*\n \*\s+\$FreeBSD\$$\n/

net: clean up empty lines in .c and .h files

tty: convert tty_lock_assert to tty_assert_locked to hide lock type

A later change, currently being iterated on in D24459, will in-fact change
the lock type to an sx so that TTY drivers can sleep on it if they need to.
Committing this ahead of time to make the review in question a little more
palatable.

tty_lock_assert() is unfortunately still needed for now in two places to
make sure that the tty lock has not been recursed upon, for those scenarios
where it's supplied by the TTY driver and possibly a mutex that is allowed
to recurse.

Suggested by: markj

Don't initialize m->m_data to m->m_pktdat, this is already done by the
mbuf allocator. That was the last remnant of such code in the kernel.

sys/netgraph: spelling fixes in comments.

No functional change.

Remove ifq_drops from struct ifqueue. Now queue drops are accounted in
struct ifnet if_oqdrops.

Some netgraph modules used ifqueue w/o ifnet. Accounting of queue drops
is simply removed from them. There were no API to read this statistic.

Sponsored by: Netflix
Sponsored by: Nginx, Inc.

Mechanically substitute flags from historic mbuf allocator with
malloc(9) flags within sys.

Exceptions:

- sys/contrib not touched
- sys/mbuf.h edited manually

Node constructor methods are supposed to be called in syscall
context always. Convert nodes to consistently use M_WAITOK flag
for memory allocation.

Reviewed by: julian

A new jail(8) with a configuration file, to replace the work currently done
by /etc/rc.d/jail.

When calling panic(), always pass a format string.

Add new tunable 'net.link.ifqmaxlen' to set default send interface
queue length. The default value for this parameter is 50, which is
quite low for many of today's uses and the only way to modify this
parameter right now is to edit if_var.h file. Also add read-only
sysctl with the same name, so that it's possible to retrieve the
current value.

MFC after: 1 month

Remove node shutdown on tty close. This could be easily done by user-level
while it's present implementation with ng_rmnode_flags() is at least
incorrect.

Change ttyhook_register() second argument from thread to process pointer.
Thread was not really needed there, while previous ng_tty implementation
that used thread pointer had locking issues (using sx while holding mutex).

Don't use curthread to resolve file descriptor. Request may be queued, so
thread will be different. Instead require sender to send process ID
together with file descriptor.

Don't assign completely meaningless name to the node on creation.
As soon as node is created from the netgraph side now, it can be found
without using this. Allow application to assign whatever name it want later.

Retire the MALLOC and FREE macros. They are an abomination unto style(9).

MFC after: 3 months

- Import the HEAD csup code which is the basis for the cvsmode work.

Update ng_tty for MPSAFE TTY.

This changes from a line discipline to the tty_hooks mechanism. Data will come
in directly via rint_bypass and sent to the peer node in a single mbuf.

As line disciplines are no longer used a new netgraph command called
NGM_TTY_SET_TTY is used to attach the tty. This takes a pointer to to the open
file descriptor of the tty and registers the tty hooks. When the tty disappears
the node will shutdown.

Thanks to: ed
Sponsored by: Hobnob, Inc

Sweep kernel replacing suser(9) calls with priv(9) calls, assigning
specific privilege names to a broad range of privileges. These may
require some future tweaking.

Sponsored by: nCircle Network Security, Inc.
Obtained from: TrustedBSD Project
Discussed on: arch@
Reviewed (at least in part) by: mlaier, jmg, pjd, bde, ceri,
Alex Lyashkov <umka at sevcity dot net>,
Skip Ford <skip dot ford at verizon dot net>,
Antoine Brodin <antoine dot brodin at laposte dot net>

Use new (inline) functions for calls into driver.

In ngt_input(), do not derefer sc (= (sc_p) tp->t_lsc) before making
sure sc != NULL.

Locking and cleanup of tty netgraph node. Tty stack is Giant-locked,
so we need to acquire Giant in netgraph methods, so that we don't
race with line discipline methods. Remove NET_NEEDS_GIANT.

- Packets coming into node from netgraph are queued in ifqueue
attached to node private data.
- Mutex in struct ifqueue is used to lock not only the queue, but
the whole private data, and tp->t_lsc field.
- tp->t_lsc pointer is used to indicate whether line discipline is
attached to netgraph or not.
- Use FLG_DIE flag to indicate that node may be destroyed.
(This protection doesn't work, and it didn't before. Must be redesigned.)
- Increment ngt_unit atomically, removing mutex.
- Acquire Giant, when executing ngt_start() from netgraph context.
- Acquire Giant, when {,de}registering line discipline.
- Uncomment forcing queue mode on peers hook, since this is reasonable.
- Force queue mode on our hook, to avoid acquiring Giant when coming from
network stack. We may already hold some mutexes at this point.

Cleanups:
- Use callout_pending() instead of our own flag.
- Remove spl(9) calls. Now we can use return() instead of ERROUT().

style(9):
- Sort includes.
- Sparse initializer for struct linesw.
- Remove some empty lines, sort declarations.

Reviewed by: julian, phk
MFC after: 1 month

/* -> /*- for license, minor formatting changes

Use ng_callout() instead of timeout(9).

Approved by: julian (mentor)

Fix an issue with ng_tty which (ab)used the tty->t_sc field which is
reserved for the device drivers:

Add a t_lsc field for line discipline private use.

Mark Netgraph TTY, KAME IPSEC, and IPX/SPX as requiring Giant for correct
operation using NET_NEEDS_GIANT(). This will result in a boot-time
restoration of Giant-enabled network operation, or run-time warning on
dynamic load (applicable only to the Netgraph component). Additional
components will likely need to be marked with this in the future.

Add a mutex ng_tty_mtx to protect the global variable ngt_unit. Note
that the locking of globals here isn't complete, and there's also a
locking issue relating to calling into and out of the tty code.

Fix line discipline switching issues: If opening a new ldisc fails,
we have to revert to TTYDISC which we know will successfully open
rather than try the previous ldisc which might also fail to open.

Do not let ldisc implementations muck about with ->t_line, and remove
code which checks for reopens, it should never happen.

Move ldisc->l_hotchar to tty->t_hotchar and have ldisc implementation
initialize it in their open routines. Reset to zero when we enter
TTYDISC. ("no" should really be -1 since zero could be a valid
hotchar for certain old european mainframe protocols.)

Do the dreaded s/dev_t/struct cdev */
Bump __FreeBSD_version accordingly.

Switch to using C99 sparse initialisers for the type methods array.
Should make no binary difference.

Submitted by: Gleb Smirnoff <glebius@cell.sick.ru>
Reviewed by: Harti Brandt <harti@freebsd.org>
MFC after: 1 week

Back out M_* changes, per decision of the TRB.

Approved by: trb

Remove M_TRYWAIT/M_WAITOK/M_WAIT. Callers should use 0.
Merge M_NOWAIT/M_DONTWAIT into a single flag M_NOWAIT.

Change the suser() API to take advantage of td_ucred as well as do a
general cleanup of the API. The entire API now consists of two functions
similar to the pre-KSE API. The suser() function takes a thread pointer
as its only argument. The td_ucred member of this thread must be valid
so the only valid thread pointers are curthread and a few kernel threads
such as thread0. The suser_cred() function takes a pointer to a struct
ucred as its first argument and an integer flag as its second argument.
The flag is currently only used for the PRISON_ROOT flag.

Discussed on: smp@

Get rid of the twisted MFREE() macro entirely.

Reviewed by: dg, bmilekic
MFC after: 3 days

Update to C99, s/__FUNCTION__/__func__/,
also don't use ANSI string concatenation.

KSE Milestone 2
Note ALL MODULES MUST BE RECOMPILED
make the kernel aware that there are smaller units of scheduling than the
process. (but only allow one thread per process at this time).
This is functionally equivalent to teh previousl -current except
that there is a thread associated with each process.

Sorry john! (your next MFC will be a doosie!)

Reviewed by: peter@freebsd.org, dillon@freebsd.org

X-MFC after: ha ha ha ha

Remove unneeded includes in the i386 case.

Part 2 of the netgraph rewrite.
This is mostly cosmetic changes, (though I caught a bug or two while
makeing them)
Reviewed by: archie@freebsd.org

Rewrite of netgraph to start getting ready for SMP.
This version is functional and is aproaching solid..
notice I said APROACHING. There are many node types I cannot test
I have tested: echo hole ppp socket vjc iface tee bpf async tty
The rest compile and "Look" right. More changes to follow.
DEBUGGING is enabled in this code to help if people have problems.

Divorce the kernel binary ABI version number from the message
format version number. (userland programs should not need to be
recompiled when the netgraph kernel internal ABI is changed.

Also fix modules that don;t handle the fact that a caller may not supply
a return message pointer. (benign at the moment because the calling code
checks, but that will change)

Reviewed by: Archie@freebsd.org
This clears out my outstanding netgraph changes.
There is a netgraph change of design in the offing and this is to some
extent a superset of soem of the new functionality and some of the old
functionality that may be removed.

This code works as before, but allows some new features that I want to
work with and evaluate. It is the basis for a version of netgraph
with integral locking for SMP use.

This is running on my test machine with no new problems :-)

Add the use of M_ZERO to netgraph.

Submitted by: josh@zipperup.org
Submitted by: Robert Drehmel <robd@gmx.net>
Submitted by: archie
Approved by: archie

Move suser() and suser_xxx() prototypes and a related #define from
<sys/proc.h> to <sys/systm.h>.

Correctly document the #includes needed in the manpage.

Add one now needed #include of <sys/systm.h>.
Remove the consequent 48 unused #includes of <sys/proc.h>.

Since neither archie nor I work at Whistle any more, change our email
addresses to be the more usefu @freebsd.org ones
so we can keep getting bug-reports.
- man pages to follow..

Remove unnecessary #include's as reported by phk's script.

Major update to the way synchronization is done in the kernel. Highlights
include:

* Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The
alpha port is still in transition and currently uses both.)

* Per-CPU idle processes.

* Interrupts are run in their own separate kernel threads and can be
preempted (i386 only).

Partially contributed by: BSDi (BSD/OS)
Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh

Two simple changes to the kernel internal API for netgraph modules,
to support future work in flow-control and 'packet reject/replace'
processing modes.

reviewed by: phk, archie

Use snprintf() instead of sprintf().

Remove a bunch of un-needed includes.
Submitted by: phk@freebsd.org

Add two new generic control messages, NGM_ASCII2BINARY and
NGM_BINARY2ASCII, which convert control messages to ASCII and back.
This allows control messages to be sent and received in ASCII form
using ngctl(8), which makes ngctl a lot more useful.

This also allows all the type-specific debugging code in libnetgraph
to go away -- instead, we just ask the node itself to do the ASCII
translation for us.

Currently, all generic control messages are supported, as well as
messages associated with the following node types: async, cisco,
ksocket, and ppp.

See /usr/share/examples/netgraph/ngctl for an example of using this.

Also give ngctl(8) the ability to print out incoming data and
control messages at any time. Eventually nghook(8) may be subsumed.

Several other misc. bug fixes.

Reviewed by: julian

When allocating a new PKTHDR mbuf, always set m->m_pkthdr.rcvif = NULL.

Add typedefs for node methods
Suggested by phk.

dang, deleted a line

Now that Netgraph is in the system there are some cleanups we can do.
Also save a slightly closer to completion version of the PPPOE code.

Submitted by: Archie Cobbs <archie@freebsd.org>

Whistle's Netgraph link-layer (sometimes more) networking infrastructure.
Been in production for 3 years now. Gives Instant Frame relay to if_sr
and if_ar drivers, and PPPOE support soon. See:
ftp://ftp.whistle.com/pub/archie/netgraph/index.html
for on-line manual pages.

Reviewed by: Doug Rabson (dfr@freebsd.org)
Obtained from: Whistle CVS tree