sys: Remove $FreeBSD$: one-line .c pattern

Remove /^[\s*]*__FBSDID\("\$FreeBSD\$"\);?\s*\n/

spdx: The BSD-2-Clause-FreeBSD identifier is obsolete, drop -FreeBSD

The SPDX folks have obsoleted the BSD-2-Clause-FreeBSD identifier. Catch
up to that fact and revert to their recommended match of BSD-2-Clause.

Discussed with: pfg
MFC After: 3 days
Sponsored by: Netflix

net80211 / drivers: rename to IEEE80211_FC0_SUBTYPE_QOS_DATA

Going through the Frame (Sub)types the "QOS Data" being called "QOS"
scheme leads to a naming conflict for QOS_CFPOLL and QOS_CFACKPOLL
(if added). Rename QOS* to QOS_DATA* to avoid the conflict and
to also better match the standards name.

No functional changes intended.

Sponsored by: The FreeBSD Foundation
MFC after: 5 days
Reviewed by: hselasky
Differential Revision: https://reviews.freebsd.org/D36409

net80211: consistently use the IEEE80211_M_ memory related options

Replace a malloc() by IEEE80211_MALLOC().
For malloc flags even in the local ieee80211_freebsd.c there was a mix
of both versions M_ and IEEE80211_M_.
Consistently use the IEEE80211_M_ malloc options everywhere.
If the field is changed for malloc, it'll also be changed for the
other accessor functions taking a "how" field to avoid any confusion.

Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Reviewed by: adrian
Differential Revision: https://reviews.freebsd.org/D36249

net: clean up empty lines in .c and .h files

sys: general adoption of SPDX licensing ID tags.

Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.

The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.

No functional change intended.

[net80211] handle hardware encryption offload in the receive path

* teach the crypto modules about receive offload - although I have
to do some further reviewing in places where we /can't/ have an RX key
* teach the RX data path about receive offload encryption - check the flag,
handle NULL key, do decap and checking as appropriate.

Tested:

* iwn(4), STA mode
* ath(4), STA and AP mode
* ath10k port, STA mode (hardware encryption)

Reviewed by: avos
Differential Revision: https://reviews.freebsd.org/D8533

net80211: add new method for ieee80211_cipher (ic_setiv).

This can be used to update IV state for the caller without adding
information to the mbuf. Some hardware (eg rum) apparently requires
bits of this.

Submitted by: <s3erios@gmail.com>
Differential Revision: https://reviews.freebsd.org/D3638

net80211: get rid of tx_phase1_done flag (ieee80211_crypto_tkip.c).

Submitted by: <s3erios@gmail.com>
Differential Revision: https://reviews.freebsd.org/D3596

net80211: separate ieee80211_crypto_get_keyid() from ieee80211_crypto_encap()

Tested:

* rum(4), STA mode
* rsu(4), STA mode
* urtwn(4), STA mode

Submitted by: <s3erios@gmail.com>
Differential Revision: https://reviews.freebsd.org/D3637

Fix neeed -> neeeded.

Submitted by: Andriy Voskoboinyk <s3erios@gmail.com>
Differential Revision: https://reviews.freebsd.org/D3595

Move counter.h include into ieee80211_freebsd.h. Should fix build.

Submitted by: Zilvinas Valinskas <zilvinas.valinskas gmail.com>

Add two counters to ieee80211com, that will be used to count transmission
or receive errors that can't be associated with any vap.

Sponsored by: Netflix
Sponsored by: Nginx, Inc.

Convert malloc/free back to #define's, as part of OS portability work.

DragonflyBSD uses the FreeBSD wireless stack and drivers. Their malloc()
API is named differently, so they don't have userland/kernel symbol
clashes like we do (think libuinet.)

So, to make it easier for them and to port to other BSDs/other operating
systems, start hiding the malloc specific bits behind defines in
ieee80211_freebsd.h.

DragonflyBSD can now put these portability defines in their local
ieee80211_dragonflybsd.h.

This should be a great big no-op for everyone running wifi.

TODO:

* kill M_WAITOK - some platforms just don't want you to use it
* .. and/or handle it returning NULL rather than waiting forever.
* MALLOC_DEFINE() ?
* Migrate the well-known malloc names (eg M_TEMP) to net80211
namespace defines.

A new jail(8) with a configuration file, to replace the work currently done
by /etc/rc.d/jail.

- Introduce IEEE80211_KEY_NOREPLAY, a per-key flag to ignore replay
violations.
- Use SIOCGIFMEDIA to determine VAP's opmode, cache it and set
IEEE80211_KEY_NOREPLAY for AHDEMO and IBSS.

Approved by: rpaulo (mentor)

Add WPA-None support:
* WPA-None requires ap_scan=2:
The major difference between ap_scan=1 (default) and 2 is, that no
IEEE80211_IOC_SCAN* ioctls/functions are called, though, there is a
dependency on those. For example the call to wpa_driver_bsd_scan()
sets the interface UP, this never happens, therefore the interface
must be marked up in wpa_driver_bsd_associate(). IEEE80211_IOC_SSID
also is not called, which means that the SSID has not been set prior
to the IEEE80211_MLME_ASSOC call.
* WPA-None has no support for sequence number updates, it doesn't make
sense to check for replay violations..
* I had some crashes right after the switch to RUN state, issue is
that sc->sc_lastrs was not yet defined.

Approved by: rpaulo (mentor)
MFC after: 3 weeks

MFC r203673:
Ensure that tkip_mixing_phase1() is called after a rekeying event when
using plain s/w crypto.

PR: bin/142547
Approved by: rpaulo (mentor)

Ensure that tkip_mixing_phase1() is called after a rekeying event when
useing plain s/w crypto.

Approved by: rpaulo (mentor)
Reviewed by: sam

add tid param to ieee80211_notify_replay_failure to get the correct rsc

convert MALLOC/FREE to malloc/free

Revert the removal of the MALLOC and FREE macros from the net80211 code.

Requested by: sam

Retire the MALLOC and FREE macros. They are an abomination unto style(9).

MFC after: 3 months

- Import the HEAD csup code which is the basis for the cvsmode work.

Fixing INVARIANTS build by adding 'z' format prefix for size_t typed
variable.

Reminded by: tinderbox

Fix mic calculation when final data is entirely in a trailing mbuf;
it's unclear if this can happen on freebsd but does appear on netbsd.
Identified by Matthias Drochner who came up with an initial change
that we then revised together.

Reviewed by: thompsa, sephe, avatar
MFC after: 2 weeks

Split s/w crypt/mic attributes to allow future hackery; this change
should be a noop.

Multi-bss (aka vap) support for 802.11 devices.

Note this includes changes to all drivers and moves some device firmware
loading to use firmware(9) and a separate module (e.g. ral). Also there
no longer are separate wlan_scan* modules; this functionality is now
bundled into the wlan module.

Supported by: Hobnob and Marvell
Reviewed by: many
Obtained from: Atheros (some bits)

Update 802.11 wireless support:
o major overhaul of the way channels are handled: channels are now
fully enumerated and uniquely identify the operating characteristics;
these changes are visible to user applications which require changes
o make scanning support independent of the state machine to enable
background scanning and roaming
o move scanning support into loadable modules based on the operating
mode to enable different policies and reduce the memory footprint
on systems w/ constrained resources
o add background scanning in station mode (no support for adhoc/ibss
mode yet)
o significantly speedup sta mode scanning with a variety of techniques
o add roaming support when background scanning is supported; for now
we use a simple algorithm to trigger a roam: we threshold the rssi
and tx rate, if either drops too low we try to roam to a new ap
o add tx fragmentation support
o add first cut at 802.11n support: this code works with forthcoming
drivers but is incomplete; it's included now to establish a baseline
for other drivers to be developed and for user applications
o adjust max_linkhdr et. al. to reflect 802.11 requirements; this eliminates
prepending mbufs for traffic generated locally
o add support for Atheros protocol extensions; mainly the fast frames
encapsulation (note this can be used with any card that can tx+rx
large frames correctly)
o add sta support for ap's that beacon both WPA1+2 support
o change all data types from bsd-style to posix-style
o propagate noise floor data from drivers to net80211 and on to user apps
o correct various issues in the sta mode state machine related to handling
authentication and association failures
o enable the addition of sta mode power save support for drivers that need
net80211 support (not in this commit)
o remove old WI compatibility ioctls (wicontrol is officially dead)
o change the data structures returned for get sta info and get scan
results so future additions will not break user apps
o fixed tx rate is now maintained internally as an ieee rate and not an
index into the rate set; this needs to be extended to deal with
multi-mode operation
o add extended channel specifications to radiotap to enable 11n sniffing

Drivers:
o ath: add support for bg scanning, tx fragmentation, fast frames,
dynamic turbo (lightly tested), 11n (sniffing only and needs
new hal)
o awi: compile tested only
o ndis: lightly tested
o ipw: lightly tested
o iwi: add support for bg scanning (well tested but may have some
rough edges)
o ral, ural, rum: add suppoort for bg scanning, calibrate rssi data
o wi: lightly tested

This work is based on contributions by Atheros, kmacy, sephe, thompsa,
mlaier, kevlo, and others. Much of the scanning work was supported by
Atheros. The 11n work was supported by Marvell.

copyright updates:
o update to include 2007
o switch back to a 2-clause bsd-only license

Reviewed by: onoe

disallow module unload when there are dynamic references

MFC after: 1 week

Split crypto tx+rx key indices and add a key index -> node mapping table:

Crypto changes:
o change driver/net80211 key_alloc api to return tx+rx key indices; a
driver can leave the rx key index set to IEEE80211_KEYIX_NONE or set
it to be the same as the tx key index (the former disables use of
the key index in building the keyix->node mapping table and is the
default setup for naive drivers by null_key_alloc)
o add cs_max_keyid to crypto state to specify the max h/w key index a
driver will return; this is used to allocate the key index mapping
table and to bounds check table loookups
o while here introduce ieee80211_keyix (finally) for the type of a h/w
key index
o change crypto notifiers for rx failures to pass the rx key index up
as appropriate (michael failure, replay, etc.)

Node table changes:
o optionally allocate a h/w key index to node mapping table for the
station table using the max key index setting supplied by drivers
(note the scan table does not get a map)
o defer node table allocation to lateattach so the driver has a chance
to set the max key id to size the key index map
o while here also defer the aid bitmap allocation
o add new ieee80211_find_rxnode_withkey api to find a sta/node entry
on frame receive with an optional h/w key index to use in checking
mapping table; also updates the map if it does a hash lookup and the
found node has a rx key index set in the unicast key; note this work
is separated from the old ieee80211_find_rxnode call so drivers do
not need to be aware of the new mechanism
o move some node table manipulation under the node table lock to close
a race on node delete
o add ieee80211_node_delucastkey to do the dirty work of deleting
unicast key state for a node (deletes any key and handles key map
references)

Ath driver:
o nuke private sc_keyixmap mechansim in favor of net80211 support
o update key alloc api

These changes close several race conditions for the ath driver operating
in ap mode. Other drivers should see no change. Station mode operation
for ath no longer uses the key index map but performance tests show no
noticeable change and this will be fixed when the scan table is eliminated
with the new scanning support.

Tested by: Michal Mertl, avatar, others
Reviewed by: avatar, others
MFC after: 2 weeks

o fix wpa w/ wme: don't strip the QoS header on recv as tkip requires
it; instead pass the space occupied by the header down into the
crypto modules (except in the demic case which needs it only when
doing int in s/w)
o while here fix defrag to strip the header from 2nd and later frames
o teach decap code how to handle 4-address frames

add force flag to enmic/demic crypto api for use in xmit fragmentation
and h/w mic verification

Reviewed by: avatar

bump copyright for 2005

correct pseudo-mic header calculation for QoS frames

whitespace/debug msg fixups

correct header length calculations on tx path for QoS-encapsulated frames
when IEEE80211_F_DATAPAD is set (e.g. ath); must use ieee80211_hdrspace
instead of ieee80211_hdrsize

correct module dependency

fixup printf arguments for 64-bit machines

Update 802.11 support; too much new functionality to fully describe
here but it includes completed 802.11g, WPA, 802.11i, 802.1x, WME/WMM,
AP-side power-save, crypto plugin framework, authenticator plugin framework,
and access control plugin frameowrk.