#
685dc743 |
|
16-Aug-2023 |
Warner Losh <imp@FreeBSD.org> |
sys: Remove $FreeBSD$: one-line .c pattern Remove /^[\s*]*__FBSDID\("\$FreeBSD\$"\);?\s*\n/
|
#
4d846d26 |
|
10-May-2023 |
Warner Losh <imp@FreeBSD.org> |
spdx: The BSD-2-Clause-FreeBSD identifier is obsolete, drop -FreeBSD The SPDX folks have obsoleted the BSD-2-Clause-FreeBSD identifier. Catch up to that fact and revert to their recommended match of BSD-2-Clause. Discussed with: pfg MFC After: 3 days Sponsored by: Netflix
|
#
fe267a55 |
|
27-Nov-2017 |
Pedro F. Giffuni <pfg@FreeBSD.org> |
sys: general adoption of SPDX licensing ID tags. Mainly focus on files that use BSD 2-Clause license, however the tool I was using misidentified many licenses so this was mostly a manual - error prone - task. The Software Package Data Exchange (SPDX) group provides a specification to make it easier for automated tools to detect and summarize well known opensource licenses. We are gradually adopting the specification, noting that the tags are considered only advisory and do not, in any way, superceed or replace the license texts. No functional change intended.
|
#
8ec07310 |
|
01-Feb-2016 |
Gleb Smirnoff <glebius@FreeBSD.org> |
These files were getting sys/malloc.h and vm/uma.h with header pollution via sys/mbuf.h
|
#
b9b53389 |
|
25-May-2015 |
Adrian Chadd <adrian@FreeBSD.org> |
Convert malloc/free back to #define's, as part of OS portability work. DragonflyBSD uses the FreeBSD wireless stack and drivers. Their malloc() API is named differently, so they don't have userland/kernel symbol clashes like we do (think libuinet.) So, to make it easier for them and to port to other BSDs/other operating systems, start hiding the malloc specific bits behind defines in ieee80211_freebsd.h. DragonflyBSD can now put these portability defines in their local ieee80211_dragonflybsd.h. This should be a great big no-op for everyone running wifi. TODO: * kill M_WAITOK - some platforms just don't want you to use it * .. and/or handle it returning NULL rather than waiting forever. * MALLOC_DEFINE() ? * Migrate the well-known malloc names (eg M_TEMP) to net80211 namespace defines.
|
#
5a8801b0 |
|
17-Dec-2011 |
Bernhard Schmidt <bschmidt@FreeBSD.org> |
Remove now redundant mac argument. Discussed with: adrian@
|
#
957458a8 |
|
14-Dec-2011 |
Adrian Chadd <adrian@FreeBSD.org> |
Modify the ACL code slightly to support a few nifty things: * Call it before sending probe responses, so the ACL code has the chance to reject sending them. * Pass the whole frame to the ACL code now, rather than just the destination MAC - that way the ACL module can look at the frame contents to determine what the response should be. This is part of some uncommitted work to support band steering. Sponsored by: Hobnob, Inc.
|
#
d745c852 |
|
06-Nov-2011 |
Ed Schouten <ed@FreeBSD.org> |
Mark MALLOC_DEFINEs static that have no corresponding MALLOC_DECLAREs. This means that their use is restricted to a single C file.
|
#
db9ff08b |
|
16-Jun-2011 |
Kevin Lo <kevlo@FreeBSD.org> |
Change i_len in ieee80211req to be unsigned and fix other signed/unsigned issues. Reviewed by: bschmidt Obtained from: NetBSD
|
#
a7d5f7eb |
|
19-Oct-2010 |
Jamie Gritton <jamie@FreeBSD.org> |
A new jail(8) with a configuration file, to replace the work currently done by /etc/rc.d/jail.
|
#
e2126dec |
|
18-Dec-2008 |
Sam Leffler <sam@FreeBSD.org> |
convert MALLOC/FREE to malloc/free
|
#
c5abbba3 |
|
23-Oct-2008 |
Dag-Erling Smørgrav <des@FreeBSD.org> |
Revert the removal of the MALLOC and FREE macros from the net80211 code. Requested by: sam
|
#
1ede983c |
|
23-Oct-2008 |
Dag-Erling Smørgrav <des@FreeBSD.org> |
Retire the MALLOC and FREE macros. They are an abomination unto style(9). MFC after: 3 months
|
#
d7f03759 |
|
19-Oct-2008 |
Ulf Lilleengen <lulf@FreeBSD.org> |
- Import the HEAD csup code which is the basis for the cvsmode work.
|
#
b032f27c |
|
20-Apr-2008 |
Sam Leffler <sam@FreeBSD.org> |
Multi-bss (aka vap) support for 802.11 devices. Note this includes changes to all drivers and moves some device firmware loading to use firmware(9) and a separate module (e.g. ral). Also there no longer are separate wlan_scan* modules; this functionality is now bundled into the wlan module. Supported by: Hobnob and Marvell Reviewed by: many Obtained from: Atheros (some bits)
|
#
68e8e04e |
|
10-Jun-2007 |
Sam Leffler <sam@FreeBSD.org> |
Update 802.11 wireless support: o major overhaul of the way channels are handled: channels are now fully enumerated and uniquely identify the operating characteristics; these changes are visible to user applications which require changes o make scanning support independent of the state machine to enable background scanning and roaming o move scanning support into loadable modules based on the operating mode to enable different policies and reduce the memory footprint on systems w/ constrained resources o add background scanning in station mode (no support for adhoc/ibss mode yet) o significantly speedup sta mode scanning with a variety of techniques o add roaming support when background scanning is supported; for now we use a simple algorithm to trigger a roam: we threshold the rssi and tx rate, if either drops too low we try to roam to a new ap o add tx fragmentation support o add first cut at 802.11n support: this code works with forthcoming drivers but is incomplete; it's included now to establish a baseline for other drivers to be developed and for user applications o adjust max_linkhdr et. al. to reflect 802.11 requirements; this eliminates prepending mbufs for traffic generated locally o add support for Atheros protocol extensions; mainly the fast frames encapsulation (note this can be used with any card that can tx+rx large frames correctly) o add sta support for ap's that beacon both WPA1+2 support o change all data types from bsd-style to posix-style o propagate noise floor data from drivers to net80211 and on to user apps o correct various issues in the sta mode state machine related to handling authentication and association failures o enable the addition of sta mode power save support for drivers that need net80211 support (not in this commit) o remove old WI compatibility ioctls (wicontrol is officially dead) o change the data structures returned for get sta info and get scan results so future additions will not break user apps o fixed tx rate is now maintained internally as an ieee rate and not an index into the rate set; this needs to be extended to deal with multi-mode operation o add extended channel specifications to radiotap to enable 11n sniffing Drivers: o ath: add support for bg scanning, tx fragmentation, fast frames, dynamic turbo (lightly tested), 11n (sniffing only and needs new hal) o awi: compile tested only o ndis: lightly tested o ipw: lightly tested o iwi: add support for bg scanning (well tested but may have some rough edges) o ral, ural, rum: add suppoort for bg scanning, calibrate rssi data o wi: lightly tested This work is based on contributions by Atheros, kmacy, sephe, thompsa, mlaier, kevlo, and others. Much of the scanning work was supported by Atheros. The 11n work was supported by Marvell.
|
#
ae8b7333 |
|
05-Jun-2007 |
Sam Leffler <sam@FreeBSD.org> |
copyright updates: o update to include 2007 o switch back to a 2-clause bsd-only license Reviewed by: onoe
|
#
188757f5 |
|
13-Aug-2005 |
Sam Leffler <sam@FreeBSD.org> |
Extend acl support to pass ioctl requests through and use this to add support for getting the current policy setting and collecting the list of mac addresses in the acl table. Submitted by: Michal Mertl (original version) MFC after: 2 weeks
|
#
1f1d7810 |
|
31-Dec-2004 |
Sam Leffler <sam@FreeBSD.org> |
bump copyright for 2005
|
#
68f5ddcd |
|
31-Dec-2004 |
Sam Leffler <sam@FreeBSD.org> |
s/inline/__inline/
|
#
8a1b9b6a |
|
08-Dec-2004 |
Sam Leffler <sam@FreeBSD.org> |
Update 802.11 support; too much new functionality to fully describe here but it includes completed 802.11g, WPA, 802.11i, 802.1x, WME/WMM, AP-side power-save, crypto plugin framework, authenticator plugin framework, and access control plugin frameowrk.
|