Revert "Widen EPOCH(9) usage in USB WLAN drivers."

This reverts commit 21c4082de9e2cf9a0fd81a9a981ab06022956847.

Sponsored by: The FreeBSD Foundation
MFC after: 3 days

sys: Remove $FreeBSD$: one-line .c comment pattern

Remove /^/[*/]\s*\$FreeBSD\$.*\n/

Mechanically convert usb ethernet drivers to DrvAPI

Reviewed by: zlei
Sponsored by: Juniper Networks, Inc.
Differential Revision: https://reviews.freebsd.org/D37812

usb(4): Substitute "unsigned int" using the equivalent and shorter "unsigned" keyword.

MFC after: 1 week
Sponsored by: NVIDIA Networking

upgt(4): Adjust all pause calls to use milliseconds instead of ticks.

MFC after: 1 week
Sponsored by: NVIDIA Networking

usb: Remove unused devclass arguments to DRIVER_MODULE.

if_upgt: Remove unused variables.

usb: clean up empty lines in .c and .h files

Mark more nodes as CTLFLAG_MPSAFE or CTLFLAG_NEEDGIANT (2 of many)

r357614 added CTLFLAG_NEEDGIANT to make it easier to find nodes that are
still not MPSAFE (or already are but aren’t properly marked). Use it in
preparation for a general review of all nodes.
This is non-functional change that adds annotations to SYSCTL_NODE and
SYSCTL_PROC nodes using one of the soon-to-be-required flags.

Reviewed by: hselasky, kib
Approved by: kib (mentor)
Differential Revision: https://reviews.freebsd.org/D23632

Widen EPOCH(9) usage in USB WLAN drivers.

This patch should unbreak the USB WLAN drivers after r357004.

Pointy hat: glebius@
Sponsored by: Mellanox Technologies

upgt(4): unbreak build with UPGT_DEBUG

MFC after: 1 week

Drop some unneeded includes from wireless USB drivers.

MFC after: 1 week

usb/wlan/*: properly include "opt_wlan.h" into all drivers

Without it driver cannot be loaded when wlan(4) module is built with
'options IEEE80211_DEBUG_REFCNT'.

net80211 + drivers: hide size of 'bands' array behind a macro.

Auto-replace 'howmany(IEEE80211_MODE_MAX, 8)' with 'IEEE80211_MODE_BYTES'.
No functional changes.

net80211 drivers: fix ieee80211_init_channels() usage

Fix out-of-bounds read (all) / write (11n capable) for drivers
that are using ieee80211_init_channels() to initialize channel list.

Tested with:
* RTL8188EU, STA mode.
* RTL8188CUS, STA mode.
* WUSB54GC, HOSTAP mode.

Approved by: adrian (mentor)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D4818

Create a USB_PNP_INFO and use it to export the existing PNP
tables. Some drivers needed some slight re-arrangement of declarations
to accommodate this. Change the USB pnp tables slightly to allow
better compatibility with the system by moving linux driver info from
start of each entry to the end. All other PNP tables in the system
have the per-device flags and such at the end of the elements rather
that at the beginning.

Differential Review: https://reviews.freebsd.org/D3458

net80211: move ieee80211_free_node() call on error from ic_raw_xmit() to ieee80211_raw_output().

This doesn't free the mbuf upon error; the driver ic_raw_xmit method is still
doing that.

Submitted by: <s3erios@gmail.com>
Differential Revision: https://reviews.freebsd.org/D3774

Replace M_NOWAIT with M_WAITOK for consistency with other wireless drivers.

Replay r286410. Change KPI of how device drivers that provide wireless
connectivity interact with the net80211 stack.

Historical background: originally wireless devices created an interface,
just like Ethernet devices do. Name of an interface matched the name of
the driver that created. Later, wlan(4) layer was introduced, and the
wlanX interfaces become the actual interface, leaving original ones as
"a parent interface" of wlanX. Kernelwise, the KPI between net80211 layer
and a driver became a mix of methods that pass a pointer to struct ifnet
as identifier and methods that pass pointer to struct ieee80211com. From
user point of view, the parent interface just hangs on in the ifconfig
list, and user can't do anything useful with it.

Now, the struct ifnet goes away. The struct ieee80211com is the only
KPI between a device driver and net80211. Details:

- The struct ieee80211com is embedded into drivers softc.
- Packets are sent via new ic_transmit method, which is very much like
the previous if_transmit.
- Bringing parent up/down is done via new ic_parent method, which notifies
driver about any changes: number of wlan(4) interfaces, number of them
in promisc or allmulti state.
- Device specific ioctls (if any) are received on new ic_ioctl method.
- Packets/errors accounting are done by the stack. In certain cases, when
driver experiences errors and can not attribute them to any specific
interface, driver updates ic_oerrors or ic_ierrors counters.

Details on interface configuration with new world order:
- A sequence of commands needed to bring up wireless DOESN"T change.
- /etc/rc.conf parameters DON'T change.
- List of devices that can be used to create wlan(4) interfaces is
now provided by net.wlan.devices sysctl.

Most drivers in this change were converted by me, except of wpi(4),
that was done by Andriy Voskoboinyk. Big thanks to Kevin Lo for testing
changes to at least 8 drivers. Thanks to pluknet@, Oliver Hartmann,
Olivier Cochard, gjb@, mmoll@, op@ and lev@, who also participated in
testing.

Reviewed by: adrian
Sponsored by: Netflix
Sponsored by: Nginx, Inc.

Further conversions from ifp->if_softc -> ic_softc.

Revert the wifi ifnet changes until things are more baked and tested.

* 286410
* 286413
* 286416

The initial commit broke a variety of debug and features that aren't
in the GENERIC kernels but are enabled in other platforms.

Change KPI of how device drivers that provide wireless connectivity interact
with the net80211 stack.

Historical background: originally wireless devices created an interface,
just like Ethernet devices do. Name of an interface matched the name of
the driver that created. Later, wlan(4) layer was introduced, and the
wlanX interfaces become the actual interface, leaving original ones as
"a parent interface" of wlanX. Kernelwise, the KPI between net80211 layer
and a driver became a mix of methods that pass a pointer to struct ifnet
as identifier and methods that pass pointer to struct ieee80211com. From
user point of view, the parent interface just hangs on in the ifconfig
list, and user can't do anything useful with it.

Now, the struct ifnet goes away. The struct ieee80211com is the only
KPI between a device driver and net80211. Details:

- The struct ieee80211com is embedded into drivers softc.
- Packets are sent via new ic_transmit method, which is very much like
the previous if_transmit.
- Bringing parent up/down is done via new ic_parent method, which notifies
driver about any changes: number of wlan(4) interfaces, number of them
in promisc or allmulti state.
- Device specific ioctls (if any) are received on new ic_ioctl method.
- Packets/errors accounting are done by the stack. In certain cases, when
driver experiences errors and can not attribute them to any specific
interface, driver updates ic_oerrors or ic_ierrors counters.

Details on interface configuration with new world order:
- A sequence of commands needed to bring up wireless DOESN"T change.
- /etc/rc.conf parameters DON'T change.
- List of devices that can be used to create wlan(4) interfaces is
now provided by net.wlan.devices sysctl.

Most drivers in this change were converted by me, except of wpi(4),
that was done by Andriy Voskoboinyk. Big thanks to Kevin Lo for testing
changes to at least 8 drivers. Thanks to Olivier Cochard, gjb@, mmoll@,
op@ and lev@, who also participated in testing. Details here:

https://wiki.freebsd.org/projects/ifnet/net80211

Still, drivers: ndis, wtap, mwl, ipw, bwn, wi, upgt, uath were not
tested. Changes to mwl, ipw, bwn, wi, upgt are trivial and chances
of problems are low. The wtap wasn't compilable even before this change.
But the ndis driver is complex, and it is likely to be broken with this
commit. Help with testing and debugging it is appreciated.

Differential Revision: D2655, D2740
Sponsored by: Nginx, Inc.
Sponsored by: Netflix

Change three methods in struct ieee80211com, namely ic_updateslot,
ic_update_mcast and ic_update_promisc, to pass pointer to the ieee80211com,
not to the ifnet.

Sponsored by: Netflix
Sponsored by: Nginx, Inc.

Set ic_softc in all 802.11 drivers. Not required right now, but will be
used quite soon.

Sponsored by: Netflix
Sponsored by: Nginx, Inc.

Make net80211 drivers supply their device name to the net80211 layer, so
that the latter doesn't need to go through struct ifnet to get their name.

Sponsored by: Netflix
Sponsored by: Nginx, Inc.

Rename NETGEAR WG111V2_2 to WG111V1_2 to reflect external naming.

Reviewed by: kevlo

Mechanically convert to if_inc_counter().

Remove unused defines.
Fix some device_printf's that were missing '\n' at the end or had
speling errors.

PR: 145319
Submitted by: rozhuk.im gmail.com

Pull in r267961 and r267973 again. Fix for issues reported will follow.

Revert r267961, r267973:

These changes prevent sysctl(8) from returning proper output,
such as:

1) no output from sysctl(8)
2) erroneously returning ENOMEM with tools like truss(1)
or uname(1)
truss: can not get etype: Cannot allocate memory

Extend the meaning of the CTLFLAG_TUN flag to automatically check if
there is an environment variable which shall initialize the SYSCTL
during early boot. This works for all SYSCTL types both statically and
dynamically created ones, except for the SYSCTL NODE type and SYSCTLs
which belong to VNETs. A new flag, CTLFLAG_NOFETCH, has been added to
be used in the case a tunable sysctl has a custom initialisation
function allowing the sysctl to still be marked as a tunable. The
kernel SYSCTL API is mostly the same, with a few exceptions for some
special operations like iterating childrens of a static/extern SYSCTL
node. This operation should probably be made into a factored out
common macro, hence some device drivers use this. The reason for
changing the SYSCTL API was the need for a SYSCTL parent OID pointer
and not only the SYSCTL parent OID list pointer in order to quickly
generate the sysctl path. The motivation behind this patch is to avoid
parameter loading cludges inside the OFED driver subsystem. Instead of
adding special code to the OFED driver subsystem to post-load tunables
into dynamically created sysctls, we generalize this in the kernel.

Other changes:
- Corrected a possibly incorrect sysctl name from "hw.cbb.intr_mask"
to "hw.pcic.intr_mask".
- Removed redundant TUNABLE statements throughout the kernel.
- Some minor code rewrites in connection to removing not needed
TUNABLE statements.
- Added a missing SYSCTL_DECL().
- Wrapped two very long lines.
- Avoid malloc()/free() inside sysctl string handling, in case it is
called to initialize a sysctl from a tunable, hence malloc()/free() is
not ready when sysctls from the sysctl dataset are registered.
- Bumped FreeBSD version to indicate SYSCTL API change.

MFC after: 2 weeks
Sponsored by: Mellanox Technologies

Rename definition of IEEE80211_FC1_WEP to IEEE80211_FC1_PROTECTED.

The origin of WEP comes from IEEE Std 802.11-1997 where it defines
whether the frame body of MAC frame has been encrypted using WEP
algorithm or not.
IEEE Std. 802.11-2007 changes WEP to Protected Frame, indicates
whether the frame is protected by a cryptographic encapsulation
algorithm.

Reviewed by: adrian, rpaulo

Check for "ieee80211_vap_setup()" failure in all USB WLAN drivers.

MFC after: 1 week

The r48589 promised to remove implicit inclusion of if_var.h soon. Prepare
to this event, adding if_var.h to files that do need it. Also, include
all includes that now are included due to implicit pollution via if_var.h

Sponsored by: Netflix
Sponsored by: Nginx, Inc.

Revert r252725 as it breaks WPA.

We need to fix wpa_supplicant because it checks whether the card has
ic_cryptocaps set. Since net80211 can do software encryption this check in
wpa_supplicant is wrong.

Set ic_cryptocaps to make sure wpa_supplicant works with WEP.

Fix bad EEPROM parsing code.

MFC after: 2 weeks

Remove unused variable.

MFC after: 1 week

- Streamline detach logic in wlan drivers, so that
freed memory cannot be used during detach.
- Remove all panic() calls from the urtw driver because
panic() is not appropriate here.
- Remove redundant checks for device detached in
device detach callbacks.
- Use DEVMETHOD_END to mark end of device methods.

MFC after: 2 weeks

Fix regression issue after r244503:
Correct init order to fix a NULL pointer access.

MFC after: 1 week
Reported by: Ian FREISLICH

Make sure all USB drivers allocate buffer memory
through the USB API and/or busdma.

The following assumptions have been made:
umass - buffers passed from CAM/SCSI layer are OK
network - mbufs are OK.

Some other nits while at it.

MFC after: 1 week
Suggested by: imp

Mechanically substitute flags from historic mbuf allocator with
malloc(9) flags in sys/dev.

Add missing CTLFLAG_TUN flag to tunable sysctls in USB stack.
Rearrange the tunables and belonging sysctl declarations, so
that they are next to eachother.

Submitted by: n_hibma @
MFC after: 1 week

Fix compiler warnings, mostly signed issues,
when USB modules are compiled with WARNS=9.

MFC after: 1 weeks

Fix some net80211 enum nits:
- ic_vap_create() uses an ieee80211_opmode argument
- ieee80211_rate2media() takes an ieee80211_phymode argument
- ieee80211_plcp2rate() takes an ieee80211_phytype argument
- cast to enum ieee80211_protmode and ieee80211_roamingmode to silence
compiler warnings

Submitted by: arundel@

Style change.
- Make it easier to port the USB code to other platforms by only using
one set of memory functions for clearing and copying memory. None of
the memory copies are overlapping. This means using bcopy() is not
required.
- Fix a compile warning when USB_HAVE_BUSDMA=0
- Add missing semicolon in avr32dci.
- Update some comments.

MFC after: 1 week

Mark all SYSCTL_NODEs static that have no corresponding SYSCTL_DECLs.

The SYSCTL_NODE macro defines a list that stores all child-elements of
that node. If there's no SYSCTL_DECL macro anywhere else, there's no
reason why it shouldn't be static.

- Move all USB device ID arrays into so-called sections,
sorted according to the mode which they support:
host, device or dual mode
- Add generic tool to extract these data:
tools/bus_autoconf

Discussed with: imp
Suggested by: Robert Millan <rmh@debian.org>
PR: misc/157903
MFC after: 14 days

A new jail(8) with a configuration file, to replace the work currently done
by /etc/rc.d/jail.

USB WLAN:
- Add new device ID

PR: usb/150989
Approved by: thompsa (mentor)

Fix build breakage from r212127

We need to grab a node reference count to vap->iv_bss before using it as it is
possible for the node to be replaced and freed at any time by
ieee80211_sta_join1().

Add new device id.

PR: usb/147190

Add new tunable 'net.link.ifqmaxlen' to set default send interface
queue length. The default value for this parameter is 50, which is
quite low for many of today's uses and the only way to modify this
parameter right now is to edit if_var.h file. Also add read-only
sysctl with the same name, so that it's possible to retrieve the
current value.

MFC after: 1 month

MFC r199816

Remove overuse of exclamation marks in kernel printfs, there mere fact a
message has been printed is enough to get someones attention. Also remove the
line number for DPRINTF/DPRINTFN, it already prints the funtion name and a
unique message.

Remove overuse of exclamation marks in kernel printfs, there mere fact a
message has been printed is enough to get someones attention. Also remove the
line number for DPRINTF/DPRINTFN, it already prints the funtion name and a
unique message.

MFC r196497

Remove redundant locking.

MFC r198098:
fixes a TX hang bug that it could happen when if_start callback didn't
be restarted by full of the output queue.

Tested by: bsduser <bsd at acd.homelinux.org>

MFC r198099:
fixes a TX hang that could be possible to happen when the trasfers are
in the high speed that some drivers don't call if_start callback after
marking ~IFF_DRV_OACTIVE.

Approved by: re (kib)

fixes a TX hang that could be possible to happen when the trasfers are
in the high speed that some drivers don't call if_start callback after
marking ~IFF_DRV_OACTIVE.

MFC after: 3 days

Remove redundant locking.

Submitted by: hps

MFC 196403: Temporarily revert the new-bus locking for 8.0 release.

Approved by: re (kib)

Temporarily revert the new-bus locking for 8.0 release. It will be
reintroduced after HEAD is reopened for commits by re@.

Approved by: re (kib), attilio

Make the newbus subsystem Giant free by adding the new newbus sxlock.
The newbus lock is responsible for protecting newbus internIal structures,
device states and devclass flags. It is necessary to hold it when all
such datas are accessed. For the other operations, softc locking should
ensure enough protection to avoid races.

Newbus lock is automatically held when virtual operations on the device
and bus are invoked when loading the driver or when the suspend/resume
take place. For other 'spourious' operations trying to access/modify
the newbus topology, newbus lock needs to be automatically acquired and
dropped.

For the moment Giant is also acquired in some key point (modules subsystem)
in order to avoid problems before the 8.0 release as module handlers could
make assumptions about it. This Giant locking should go just after
the release happens.

Please keep in mind that the public interface can be expanded in order
to provide more support, if there are really necessities at some point
and also some bugs could arise as long as the patch needs a bit of
further testing.

Bump __FreeBSD_version in order to reflect the newbus lock introduction.

Reviewed by: ed, hps, jhb, imp, mav, scottl
No answer by: ariff, thompsa, yongari
Tested by: pho,
G. Trematerra <giovanni dot trematerra at gmail dot com>,
Brandon Gooch <jamesbrandongooch at gmail dot com>
Sponsored by: Yahoo! Incorporated
Approved by: re (ksmith)

Use if_maddr_rlock()/if_maddr_runlock() rather than IF_ADDR_LOCK()/
IF_ADDR_UNLOCK() across network device drivers when accessing the
per-interface multicast address list, if_multiaddrs. This will
allow us to change the locking strategy without affecting our driver
programming interface or binary interface.

For two wireless drivers, remove unnecessary locking, since they
don't actually access the multicast address list.

Approved by: re (kib)
MFC after: 6 weeks

- Make struct usb_xfer opaque so that drivers can not access the internals
- Reduce the number of headers needed for a usb driver, the common case is just usb.h and usbdi.h

s/usb2_/usb_|usbd_/ on all function names for the USB stack.

s/usb2_/usb_/ on all typedefs for the USB stack.

s/usb2_/usb_/ on all C structs for the USB stack.

Print out device attachment.

- rename usb2_mode to usb_mode [1]
- change variable types to use the enum

Submitted by: Hans Petter Selasky [1]

Overhaul monitor mode handling:
o replace DLT_IEEE802_11 support in net80211 with DLT_IEEE802_11_RADIO
and remove explicit bpf support from wireless drivers; drivers now
use ieee80211_radiotap_attach to setup shared data structures that
hold the radiotap header for each packet tx/rx
o remove rx timestamp from the rx path; it was used only by the tdma support
for debugging and was mostly useless due to it being 32-bits and mostly
unavailable
o track DLT_IEEE80211_RADIO bpf attachments and maintain per-vap and
per-com state when there are active taps
o track the number of monitor mode vaps
o use bpf tap and monitor mode vap state to decide when to collect radiotap
state and dispatch frames; drivers no longer explicitly directly check
bpf state or use bpf calls to tap frames
o handle radiotap state updates on channel change in net80211; drivers
should not do this (unless they bypass net80211 which is almost always
a mistake)
o update various drivers to be more consistent/correct in handling radiotap
o update ral to include TSF in radiotap'd frames
o add promisc mode callback to wi

Reviewed by: cbzimmer, rpaulo, thompsa

try to unsetup USB xfers before calling ieee80211_ifdetach() to fix a
bug referencing a destroyed lock within TX callbacks during device
detach.

Submitted by: hps (original version)
Tested by: Lucius Windschuh <lwindschuh at googlemail.com>

ports upgt(4) driver for USB2.