#
685dc743 |
|
16-Aug-2023 |
Warner Losh <imp@FreeBSD.org> |
sys: Remove $FreeBSD$: one-line .c pattern Remove /^[\s*]*__FBSDID\("\$FreeBSD\$"\);?\s*\n/
|
#
e315351f |
|
24-Aug-2022 |
Doug Ambrisko <ambrisko@FreeBSD.org> |
Add the mfi(4) ioctl support to mrsas(4) The hardware supported by mfi(4) and mrsas(4) use the same dcmd's. mfiutil(8) in theory could run on controlled attached to mrsas(4). It can't since mrsas(4) doesn't have support for the FreeBSD mfi(4) ioctl. Porting the ioctl from mfi(4) to mrsas(4) would be the first step in making mrsasutil(8) which is an additional name for mfiutil(8) but opens /dev/mrsasX instead of /dev/mfiX PR: https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=265794 Reviewed by: jhb Differential revision: https://reviews.freebsd.org/D36342 Tested by: Dan Mahoney <freebsd@gushi.org>
|
#
bbfb2447 |
|
28-Apr-2023 |
Zhenlei Huang <zlei@FreeBSD.org> |
mrsas: Fix a typo in a source code comment - s/feild/field/ MFC after: 3 days
|
#
721d3e7e |
|
22-Jun-2022 |
Elliott Mitchell <ehem+freebsd@m5p.com> |
mrsas: purge EOL release compatibility Remove FreeBSD 7, 8, 9 and 10 compatibility code. Reviewed by: imp Pull Request: https://github.com/freebsd/freebsd-src/pull/603 Differential Revision: https://reviews.freebsd.org/D35560
|
#
e34a057c |
|
03-Feb-2021 |
Alfredo Dal'Ava Junior <alfredo@FreeBSD.org> |
[POWERPC64BE] mrsas: add big-endian support Add endiannes conversions in order to support big-endian platforms Submitted by: Andre Fernando da Silva <andre.silva@eldorado.org.br> Reviewed by: luporl, alfredo, kadesai (on email) Sponsored by: Eldorado Research Institute (eldorado.org.br) Differential Revision: https://reviews.freebsd.org/D26531
|
#
139b723f |
|
01-Sep-2020 |
Mateusz Guzik <mjg@FreeBSD.org> |
mrsas: clean up empty lines in .c and .h files
|
#
e2e050c8 |
|
19-May-2019 |
Conrad Meyer <cem@FreeBSD.org> |
Extract eventfilter declarations to sys/_eventfilter.h This allows replacing "sys/eventfilter.h" includes with "sys/_eventfilter.h" in other header files (e.g., sys/{bus,conf,cpu}.h) and reduces header pollution substantially. EVENTHANDLER_DECLARE and EVENTHANDLER_LIST_DECLAREs were moved out of .c files into appropriate headers (e.g., sys/proc.h, powernv/opal.h). As a side effect of reduced header pollution, many .c files and headers no longer contain needed definitions. The remainder of the patch addresses adding appropriate includes to fix those files. LOCK_DEBUG and LOCK_FILE_LINE_ARG are moved to sys/_lock.h, as required by sys/mutex.h since r326106 (but silently protected by header pollution prior to this change). No functional change (intended). Of course, any out of tree modules that relied on header pollution for sys/eventhandler.h, sys/lock.h, or sys/mutex.h inclusion need to be fixed. __FreeBSD_version has been bumped.
|
#
0298863e |
|
12-Mar-2019 |
Kashyap D Desai <kadesai@FreeBSD.org> |
Update driver version to 07.709.04.00-fbsd Submitted by: Sumit Saxena <sumit.saxena@broadcom.com> Reviewed by: Kashyap Desai <Kashyap.Desai@broadcom.com> Approved by: Ken MFC after: 3 days Sponsored by: Broadcom Inc
|
#
8c58ee6f |
|
26-Dec-2018 |
Kashyap D Desai <kadesai@FreeBSD.org> |
Driver version upgrade. Submitted by: Sumit Saxena <sumit.saxena@broadcom.com> Reviewed by: Kashyap Desai <Kashyap.Desai@broadcom.com> Approved by: ken MFC after: 3 days Sponsored by: Broadcom Inc
|
#
b518670c |
|
26-Dec-2018 |
Kashyap D Desai <kadesai@FreeBSD.org> |
This patch will add support for 32 bit atomic request descriptor for Aero adapters. For Aero adapters- 1. Driver will use 32 bit atomic descriptor to fire IOs and DCMDs. 2. Driver will use 64 bit request descriptor to fire IOC INIT. 3. If Aero firmware supports 32 bit atomic descriptor, then only driver will use it otherwise driver will use 64 bit request descriptor. For rest of adapters(Ventura, Invader and Thunderbolt), driver will use 64 bit request descriptors only. Submitted by: Sumit Saxena <sumit.saxena@broadcom.com> Reviewed by: Kashyap Desai <Kashyap.Desai@broadcom.com> Approved by: ken MFC after: 3 days Sponsored by: Broadcom Inc
|
#
2909aab4 |
|
26-Dec-2018 |
Kashyap D Desai <kadesai@FreeBSD.org> |
This patch will add support for latest generation MegaRAID adapters- Aero(39xx). Driver will throw a warning message when a Configurable secure type controller is encountered. Submitted by: Sumit Saxena <sumit.saxena@broadcom.com> Reviewed by: Kashyap Desai <Kashyap.Desai@broadcom.com> Approved by: ken MFC after: 3 days Sponsored by: Broadcom Inc
|
#
3fa18dc3 |
|
14-Dec-2018 |
Kashyap D Desai <kadesai@FreeBSD.org> |
Driver version upgrade 07.708.02.00-fbsd Submitted by: Sumit Saxena <sumit.saxena@broadcom.com> Reviewed by: Kashyap Desai <Kashyap.Desai@broadcom.com> Approved by: ken MFC after: 3 days Sponsored by: Broadcom Inc
|
#
e80341d5 |
|
14-Dec-2018 |
Kashyap D Desai <kadesai@FreeBSD.org> |
Change IOC INIT wait time to 180 secs to keep it inline with timeout used by internal DCMDs. Submitted by: Sumit Saxena <sumit.saxena@broadcom.com> Reviewed by: Kashyap Desai <Kashyap.Desai@broadcom.com> Approved by: ken MFC after: 3 days Sponsored by: Broadcom Inc
|
#
3d273176 |
|
14-Dec-2018 |
Kashyap D Desai <kadesai@FreeBSD.org> |
This patch will add support for NVME PRPs creation by driver for fastpath capable IOs. NVME specification supports specific type of scatter gather list called as PRP (Physical Region Page) for IO data buffers. Since NVME drive is connected behind SAS3.5 tri-mode adapter, MegaRAID driver/firmware has to convert OS SGLs in native NVMe PRP format. For IOs sent to firmware, MegaRAID firmware does this job of OS SGLs to PRP translation and send PRPs to backend NVME device. For fastpath IOs, driver will do this OS SGLs to PRP translation. Submitted by: Sumit Saxena <sumit.saxena@broadcom.com> Reviewed by: Kashyap Desai <Kashyap.Desai@broadcom.com> Approved by: ken MFC after: 3 days Sponsored by: Broadcom Inc
|
#
79b4460b |
|
14-Dec-2018 |
Kashyap D Desai <kadesai@FreeBSD.org> |
This patch will add support for new DCMD to get PD information and a single data structure to specify LD and JBOD. Submitted by: Sumit Saxena <sumit.saxena@broadcom.com> Reviewed by: Kashyap Desai <Kashyap.Desai@broadcom.com> Approved by: ken MFC after: 3 days Sponsored by: Broadcom Inc
|
#
2a1d3bcd |
|
14-Dec-2018 |
Kashyap D Desai <kadesai@FreeBSD.org> |
To improve RAID 1/10 Write performance, OS drivers need to issue the required Write IOs as Fast Path IOs (after the appropriate checks allowing Fast Path to be used) to the appropriate physical drives (translated from the OS logical IO) and wait for all Write IOs to complete. Design: A write IO on RAID volume will be examined if it can be sent in Fast Path based on IO size and starting LBA and ending LBA falling on to a Physical Drive boundary. If the underlying RAID volume is a RAID 1/10, driver issues two fast path write IOs one for each corresponding physical drive after computing the corresponding start LBA for each physical drive. Both write IOs will have the same payload and are posted to HW such that replies land in the same reply queue. If there are no resources available for sending two IOs, driver will send the original IO from upper layer to RAID volume through the Firmware. When both IOs are completed by HW, the resources will be released and SCSI IO completion handler will be called. Submitted by: Sumit Saxena <sumit.saxena@broadcom.com> Reviewed by: Kashyap Desai <Kashyap.Desai@broadcom.com> Approved by: ken MFC after: 3 days Sponsored by: Broadcom Inc
|
#
821df4b9 |
|
14-Dec-2018 |
Kashyap D Desai <kadesai@FreeBSD.org> |
Detect sequential Write IOs and pass the hint that it is part of sequential stream to help HBA Firmware do the Full Stripe Writes. For read IOs on certain RAID volumes like Read Ahead volumes,this will help driver to send it to Firmware even if the IOs can potentially be sent to hardware directly (called fast path) bypassing firmware. Design: 8 streams are maintained per RAID volume as per the combined firmware/driver design. When there is no stream detected the LRU stream is used for next potential stream and LRU/MRU map is updated to make this as MRU stream. Every time a stream is detected the MRU map is updated to make the current stream as MRU stream. Submitted by: Sumit Saxena <sumit.saxena@broadcom.com> Reviewed by: Kashyap Desai <Kashyap.Desai@broadcom.com> Approved by: ken MFC after: 3 days Sponsored by: Broadcom Inc
|
#
c376f864 |
|
14-Dec-2018 |
Kashyap D Desai <kadesai@FreeBSD.org> |
This patch will add new interface to support more than 256 JBODs. Submitted by: Sumit Saxena <sumit.saxena@broadcom.com> Reviewed by: Kashyap Desai <Kashyap.Desai@broadcom.com> Approved by: ken MFC after: 3 days Sponsored by: Broadcom Inc
|
#
503c4f8d |
|
14-Dec-2018 |
Kashyap D Desai <kadesai@FreeBSD.org> |
This patch will add support for divert bitmap in RAID map. Divert bitmap is supported for SAS3.5 adapters only. Submitted by: Sumit Saxena <sumit.saxena@broadcom.com> Reviewed by: Kashyap Desai <Kashyap.Desai@broadcom.com> Approved by: ken MFC after: 3 days Sponsored by: Broadcom Inc
|
#
4ad83576 |
|
14-Dec-2018 |
Kashyap D Desai <kadesai@FreeBSD.org> |
This patch will add support for new Dynamic RaidMap to have different sizes for different number of supported VDs for SAS3.5 MegaRAID adapters. Submitted by: Sumit Saxena <sumit.saxena@broadcom.com> Reviewed by: Kashyap Desai <Kashyap.Desai@broadcom.com> Approved by: ken MFC after: 3 days Sponsored by: Broadcom Inc
|
#
7aade8bf |
|
14-Dec-2018 |
Kashyap D Desai <kadesai@FreeBSD.org> |
This patch will add support for next generation(SAS3.5) of Tri mode(SAS, SATA, NVMe) MegaRAID adapters. Submitted by: Sumit Saxena <sumit.saxena@broadcom.com> Reviewed by: Kashyap Desai <Kashyap.Desai@broadcom.com> Approved by: ken MFC after: 3 days Sponsored by: Broadcom Inc
|
#
f71ef9b6 |
|
06-Nov-2018 |
Mark Johnston <markj@FreeBSD.org> |
Use plain atomic_{add,subtract} when that's sufficient. CID: 1386920 MFC after: 2 weeks
|
#
605a51e3 |
|
29-Nov-2016 |
Kashyap D Desai <kadesai@FreeBSD.org> |
This patch upgrades driver version to 06.712.04.00-fbsd Submitted by: Sumit Saxena <sumit.saxena@broadcom.com> Reviewed by: Kashyap Desai <Kashyap.Desai@broadcom.com> MFC after: 3 days Sponsored by: Broadcom Limited/AVAGO Technologies
|
#
d993dd83 |
|
29-Nov-2016 |
Kashyap D Desai <kadesai@FreeBSD.org> |
This patch will unblock SYNCHRONIZE_CACHE command to firmware, i.e. don't block the SYNCHRONIZE_CACHE command at driver instead of passing it to firmware for all Gen3 controllers. For Thunderbolt controller, keep the legacy behavior i.e. return the SYNCHRONIZE_CACHE command with success status from driver itself. There is Sysctl parameter 'block_sync_cache' is provided to enable customers either to block/unblock these commands to facilitate legacy behavior if there is a compatibility issue. Default value for module parameter is to unblock this command. Submitted by: Sumit Saxena <sumit.saxena@broadcom.com> Reviewed by: Kashyap Desai <Kashyap.Desai@broadcom.com> MFC after: 3 days Sponsored by: Broadcom Limited/AVAGO Technologies
|
#
8bb601ac |
|
29-Nov-2016 |
Kashyap D Desai <kadesai@FreeBSD.org> |
This patch will add task management support in driver. Below is high level description: If a SCSI IO times out, then before initiating OCR, now the driver will try to send a target reset to the particular target for which the IO is timed out. If that also fails, then the driver will initiate OCR. Submitted by: Sumit Saxena <sumit.saxena@broadcom.com> Reviewed by: Kashyap Desai <Kashyap.Desai@broadcom.com> MFC after: 3 days Sponsored by: Broadcom Limited/AVAGO Technologies
|
#
8bc320ad |
|
28-Nov-2016 |
Kashyap D Desai <kadesai@FreeBSD.org> |
Update controller properties(read OCR capability bit) when MR_EVT_CTRL_PROP_CHANGED recieved. Submitted by: Sumit Saxena <sumit.saxena@broadcom.com> Reviewed by: Kashyap Desai <Kashyap.Desai@broadcom.com> MFC after: 3 days Sponsored by: Broadcom Limited/AVAGO Technologies
|
#
f9c63081 |
|
28-Nov-2016 |
Kashyap D Desai <kadesai@FreeBSD.org> |
Use a variable to indicate Gen3 controllers and remove all PCI ids based checks used for gen3 controllers. Submitted by: Sumit Saxena <sumit.saxena@broadcom.com> Reviewed by: Kashyap Desai <Kashyap.Desai@broadcom.com> MFC after: 3 days Sponsored by: Broadcom Limited/AVAGO Technologies
|
#
731b7561 |
|
28-Nov-2016 |
Kashyap D Desai <kadesai@FreeBSD.org> |
Problem statement: MFI linked list in megaraid_sas driver is used for mfi-mpt pass-through commands. This list can be corrupted due to many possible race conditions in driver and eventually we may see kernel panic. One example - MFI frame is freed from calling process as driver send command via polling method and interrupt for that command comes after driver free mfi frame (actually even after some other context reuse the mfi frame). When driver receive MPT frame in ISR, driver will be using the index of MFI and access that MFI frame and finally in-used MFI frames list will be corrupted. High level description of new solution - Free MFI and MPT command from same context. Free both the command either from process (from where mfi-mpt pass-through was called) or from ISR context. Do not split freeing of MFI and MPT, because it creates the race condition which will do MFI/MPT list. Submitted by: Sumit Saxena <sumit.saxena@broadcom.com> Reviewed by: Kashyap Desai <Kashyap.Desai@broadcom.com> MFC after: 3 days Sponsored by: Broadcom Limited/AVAGO Technologies
|
#
8cd174a4 |
|
01-Jun-2016 |
Kashyap D Desai <kadesai@FreeBSD.org> |
Added support for Avago/Broadcom Cutlass(12 Gbps- 16 port count) controllers. Submitted by: Sumit Saxena <Sumit.Saxena@broadcom.com> Reviewed by: Kashyap Desai <Kashyap.Desai@broadcom.com> MFC after: 3 days Sponsored by: AVAGO/BROADCOM Limited
|
#
ac624ec0 |
|
12-May-2016 |
Kashyap D Desai <kadesai@FreeBSD.org> |
Version update patch. Submitted by: Sumit Saxena <sumit.saxena@broadcom.com> Reviewed by: Kashyap Desai <Kashyap.Desai@broadcom.com> MFC after: 3 days Sponsored by: AVAGO Technologies
|
#
c620f351 |
|
12-May-2016 |
Kashyap D Desai <kadesai@FreeBSD.org> |
Added supprot for Avago Intruder controller. Submitted by: Sumit Saxena <sumit.saxena@broadcom.com> Reviewed by: Kashyap Desai <Kashyap.Desai@broadcom.com> MFC after: 3 days Sponsored by: AVAGO Technologies
|
#
8071588d |
|
12-May-2016 |
Kashyap D Desai <kadesai@FreeBSD.org> |
Implemented interrupt Config Hook in mrsas(4) to defer some of the tasks, like: riegistering AEN, creating cdev. Submitted by: Sumit Saxena <sumit.saxena@broadcom.com> Reviewed by: Kashyap Desai <Kashyap.Desai@broadcom.com> MFC after: 3 days Sponsored by: AVAGO Technologies
|
#
3a3fc6cb |
|
12-May-2016 |
Kashyap D Desai <kadesai@FreeBSD.org> |
This patch implements driver support for 1MB IO size. NOTE: The FreeBSD system currently restricts the MAX IO size to MAXPHYS which in turn is 128KB. We tested the 1MB IO by converting the MAXPHYS to 1MB. Following is the mail reference: http://lists.freebsd.org/pipermail/freebsd-scsi/2015-January/006568.html Submitted by: Sumit Saxena <sumit.saxena@broadcom.com> Reviewed by: Kashyap Desai <Kashyap.Desai@broadcom.com> MFC after: 3 days Sponsored by: AVAGO Technologies
|
#
a688fcd0 |
|
12-May-2016 |
Kashyap D Desai <kadesai@FreeBSD.org> |
Similar to RAID map for Logical Drives, now JBOD map has been introduced for JBODs. Driver has to sync the JBOD map with firmware and use sequence number as a reference for JBOD FastPath I/O's. Submitted by: Sumit Saxena <sumit.saxena@broadcom.com> Reviewed by: Kashyap Desai <Kashyap.Desai@broadcom.com> MFC after: 3 days Sponsored by: AVAGO Technologies
|
#
f0c7594b |
|
12-May-2016 |
Kashyap D Desai <kadesai@FreeBSD.org> |
There was no ERROR handling for firmware command TIMEOUT. This patch takes care of any firmware command timeout scenarios by initiating OCR. Submitted by: Sumit Saxena <sumit.saxena@broadcom.com> Reviewed by: Kashyap Desai <Kashyap.Desai@broadcom.com> MFC after: 3 days Sponsored by: AVAGO Technologies
|
#
2f2163ab |
|
25-Jun-2015 |
Kashyap D Desai <kadesai@FreeBSD.org> |
Counter part of mfi driver commit in mrsas Switch from make_dev_alias to make_dev_alias_p since make_dev_alias_p can gracefully fail if the /dev/megaraid_sas_ioctl_node symlink already exists. This can happen if mfi(4) and mrsas(4) are both attached to cards and providing Linux emulation support. Let the first one win. An equivalent change has been done in mfi(4). Extra credit would be to pass the Linux emulation call to the other driver when appropriate. This will probably be a rare case and the user can manually change where the symlink points to. MFC after: 3 days
|
#
dbcc81df |
|
06-May-2015 |
Kashyap D Desai <kadesai@FreeBSD.org> |
Corrected indentation on conflicted source files. Reviewed by: ambrisko MFC after: 2 weeks Sponsored by: AVAGO Technologies
|
#
1bebd871 |
|
06-May-2015 |
Kashyap D Desai <kadesai@FreeBSD.org> |
Configured the mrsas(4) driver to support UNMAPPED I/O and updated driver version. Reviewed by: ambrisko MFC after: 2 weeks Sponsored by: AVAGO Technologies
|
#
ecea5be4 |
|
06-May-2015 |
Kashyap D Desai <kadesai@FreeBSD.org> |
1. All LSI namings are converted to AVAGO Tech. 2. Fix in AEN path(suggested by John Baldwin). 3. Fix IOCTL path w.r.t Sense key handling Reviewed by: ambrisko MFC after: 2 weeks Sponsored by: AVAGO Technologies
|
#
2f863eb8 |
|
06-May-2015 |
Kashyap D Desai <kadesai@FreeBSD.org> |
Bug fixes found internally as detailed below: 1. While disabling interrupt the FW disables interrupts for only 16 vectors. In case of Invader which supports 96 MSI-x vectors, some spurious interrupts may come on other vectors even after interrupt disable. So, driver uses a flag and ignores the spurious interrupts. 2. Reply queue depth is made double the number of commands supported by FW. 3. Misplaced interrupt enable code is now moved down in the OCR path. 4. Updated error handling code in OCR path. 5. Removed un-necessary print. Reviewed by: ambrisko MFC after: 2 weeks Sponsored by: AVAGO Technologies
|
#
af51c29f |
|
06-May-2015 |
Kashyap D Desai <kadesai@FreeBSD.org> |
In OCR(Online Controller Reset) path, driver sets adapter state to MEGASAS_HBA_OPERATIONAL before getting new RAID map. There will be a small window where IO will come from OS with old RAID map. This patch will update adapter state to MEGASAS_HBA_OPERATIONAL, only after driver has new RAID map to avoid any IOs getting build using old RAID map. Reviewed by: ambrisko MFC after: 2 weeks Sponsored by: AVAGO Technologies
|
#
16dc2814 |
|
06-May-2015 |
Kashyap D Desai <kadesai@FreeBSD.org> |
Current driver does fast path read load balancing between arm and mirror disk for two Drive Raid-1 configuration only. Now, Driver support fast path read load balancing for all (any number of disk) Raid-1 configuration. Reviewed by: ambrisko MFC after: 2 weeks Sponsored by: AVAGO Technologies
|
#
77cf7df8 |
|
06-May-2015 |
Kashyap D Desai <kadesai@FreeBSD.org> |
Now Driver expose Secure Jbod Support via driver_operations in MFI INIT Frame. FW expose Secure Jbod support via Controller properity. Firmware expect IOs to be received from different IO path than conventional fast path queue, in case of SED drives. To have Secure jbod support user need driver and firmware support. Reviewed by: ambrisko MFC after: 2 weeks Sponsored by: AVAGO Technologies
|
#
5844115e |
|
06-May-2015 |
Kashyap D Desai <kadesai@FreeBSD.org> |
This patch adds the feature to provide PCI information via IOCTL query. Reviewed by: ambrisko MFC after: 2 weeks Sponsored by: AVAGO Technologies
|
#
f0188618 |
|
21-Oct-2014 |
Hans Petter Selasky <hselasky@FreeBSD.org> |
Fix multiple incorrect SYSCTL arguments in the kernel: - Wrong integer type was specified. - Wrong or missing "access" specifier. The "access" specifier sometimes included the SYSCTL type, which it should not, except for procedural SYSCTL nodes. - Logical OR where binary OR was expected. - Properly assert the "access" argument passed to all SYSCTL macros, using the CTASSERT macro. This applies to both static- and dynamically created SYSCTLs. - Properly assert the the data type for both static and dynamic SYSCTLs. In the case of static SYSCTLs we only assert that the data pointed to by the SYSCTL data pointer has the correct size, hence there is no easy way to assert types in the C language outside a C-function. - Rewrote some code which doesn't pass a constant "access" specifier when creating dynamic SYSCTL nodes, which is now a requirement. - Updated "EXAMPLES" section in SYSCTL manual page. MFC after: 3 days Sponsored by: Mellanox Technologies
|
#
f5fb2237 |
|
13-Oct-2014 |
Kashyap D Desai <kadesai@FreeBSD.org> |
Fix for build issue on i386.xen and amd64.xen. This is a duplicate variable reference in mrsas, so now this patch isolate atomic_ variable and relavent function call using prefix mrsas_xx. Issue was introduced in r272737. MFC after: 2 weeks Sponsored by: Avago Technology
|
#
8e727371 |
|
08-Oct-2014 |
Kashyap D Desai <kadesai@FreeBSD.org> |
No logical code change in this pathc. Only Style 9 changes for mrsas driver. Reviewed by: ambrisko MFC after: 2 weeks Sponsored by: AVAGO Technologies
|
#
7efff25b |
|
08-Oct-2014 |
Kashyap D Desai <kadesai@FreeBSD.org> |
Driver version upgrade. Bring head mrsas same as internal Phase 6.5. Reviewed by: ambrisko MFC after: 2 weeks Sponsored by: AVAGO Technologies
|
#
839ee025 |
|
08-Oct-2014 |
Kashyap D Desai <kadesai@FreeBSD.org> |
In the passthru IOCTL path, the mfi command pool was freely accessible N times where as there are limited number(32) of mfi commands in the pool. The mfi command pool is now restricted to 27 simultaneous accesses by using a counting semaphore while calling the passthru function. In the mrsas_cam.c source file there was a same function name mrsas_poll(), which was same as the mrsas_poll() implemented in the mrsas.c file for the polling interface. To clearly distinguish the functionality by usage we have renamed the former as mrsas_cam_poll(). In the passthru function let's say it has got an mfi command from the pool but it has failed in one of the DMA function call which will lead to leak an mfi command because in the ERROR case it directly returns and not freeing up the occupied mfi command. Reviewed by: ambrisko MFC after: 2 weeks Sponsored by: AVAGO Technologies
|
#
da011113 |
|
08-Oct-2014 |
Kashyap D Desai <kadesai@FreeBSD.org> |
d_poll() callback function is the entry point for poll system call for the application. It is meant to notify the applications which will be waiting for some controller events to be occured. Reviewed by: ambrisko MFC after: 2 weeks Sponsored by: AVAGO Technologies
|
#
d18d1b47 |
|
08-Oct-2014 |
Kashyap D Desai <kadesai@FreeBSD.org> |
Extended MSI-x vectors support for Invader and Fury(12Gb/s HBA). This Driver will create multiple MSI-x vector depending upon what FW expose. As of now 12 Gbp/s MR controller (Invader and Fury) expose 96 msix vector. As of now 6 Gbp/s MR controller (Thunderbolt) expose 16 msix vector. Reviewed by: ambrisko MFC after: 2 weeks Sponsored by: AVAGO Technologies
|
#
536094dc |
|
08-Oct-2014 |
Kashyap D Desai <kadesai@FreeBSD.org> |
This is a feature provided to run 32-bit linux binaries on FreeBSD 64bit machine, for which 32bit compatibilty code has been added. As in linux there is only one device entry that is used to fire IOCTL commands, a new device entry megaraid_sas_ioctl_node is added for solely this purpose. From one dev node i.e mrgaraid_sa_ioctl_node we have to find out the controller instance in case of multicontroller, for which one management info structure has been added. Reviewed by: ambrisko MFC after: 2 weeks Sponsored by: AVAGO Technologies
|
#
4799d485 |
|
08-Oct-2014 |
Kashyap D Desai <kadesai@FreeBSD.org> |
Current MegaRAID firmware and hence the driver only supported 64VDs. E.g: If the user wants to create more than 64VD on a controller, it is not possible on current firmware/driver. New feature and requirement to support upto 256VD, firmware/driver/apps need changes. In addition to that, there must be a backward compatibility of the new driver with the older firmware and vice versa. RAID map is the interface between Driver and FW to fetch all required fields(attributes) for each Virtual Drives. In the earlier design driver was using the FW copy of RAID map where as in the new design the Driver will keep the RAID map copy of its own; on which it will operate for any raid map access in fast path. Local driver raid map copy will provide ease of access through out the code and provide generic interface for future FW raid map changes. For the backward compatibility driver will notify FW that it supports 256VD to the FW in driver capability field. Based on the controller properly returned by the FW, the Driver will know whether it supports 256VD or not and will copy the RAID map accordingly. At any given time, driver will always have old or new Raid map. Reviewed by : ambrisko MFC after : 2 weeks Sponsored by: AVAGO Technologies
|
#
49328cc3 |
|
02-Sep-2014 |
Kashyap D Desai <kadesai@FreeBSD.org> |
Fix for WITNESS warning while doing xpt_rescan. This happen when converting any JBOD to RAID or creating any new RAID from Unconfigured Drives. Without this fix, user may see below call trace if WITNESS is enabled. witness_warn() at witness_warn+0x4b5/frame 0xfffffe011f929a00 uma_zalloc_arg() at uma_zalloc_arg+0x3b/frame 0xfffffe011f929a70 malloc() at malloc+0x192/frame 0xfffffe011f929ac0 mrsas_bus_scan_sim() at mrsas_bus_scan_sim+0x32/frame 0xfffffe011f929af0 mrsas_aen_handler() at mrsas_aen_handler+0x11c/frame 0xfffffe011f929b20 taskqueue_run_locked() at taskqueue_run_locked+0xf0/frame 0xfffffe011f929b80 taskqueue_thread_loop() at taskqueue_thread_loop+0x9b/frame 0xfffffe011f929bb0 fork_exit() at fork_exit+0x84/frame 0xfffffe011f929bf0 fork_trampoline() at fork_trampoline+0xe/frame 0xfffffe011f929bf0 Submitted by: kadesai Reviewed by: ambrisko MFC after: 3 days
|
#
665484d8 |
|
07-May-2014 |
Doug Ambrisko <ambrisko@FreeBSD.org> |
Add mrsas(4) driver from LSI official support of newer MegaRAID SAS cards. LSI has been maintaining this driver outside of the FreeBSD tree. It overlaps support of ThunderBolt and Invader cards that mfi(4) supports. By default mfi(4) will attach to cards. If the tunable: hw.mfi.mrsas_enable=1 is set then mfi(4) will not probe and attach to these newer cards and allow mrsas(4) to attach. So by default this driver will not effect a FreeBSD system unless mfi(4) is removed from the kernel or the tunable is enabled. mrsas(4) attaches disks to the CAM layer so it depends on CAM and devices show up as /dev/daX. mfiutil(8) does not work with mrsas. The FreeBSD version of MegaCli and StorCli from LSI do work with mrsas. It appears that StorCli only works with mrsas. MegaCli appears to work with mfi(4) and mrsas(4). It would be good to add mfiutil(4) support to mrsas, emulations modes, kernel logging, device aliases to ease the transition between mfi(4) and mrsas(4). Style issues should be resolved by LSI when they get committers approved. The plan is get this driver in FreeBSD 9.3 to improve HW support. Thanks to LSI for developing, testing and working with FreeBSD to make this driver co-exist in FreeBSD. This improves the overall support of MegaRAID SAS. Submitted by: Kashyap Desai <Kashyap.Desai@lsi.com> Reviewed by: scottl MFC after: 3 days Sponsored by: LSI
|