sys: Remove $FreeBSD$: one-line .c comment pattern

Remove /^/[*/]\s*\$FreeBSD\$.*\n/

e1000: fix K1 configuration

This patch is for the following updates to the K1 configurations:
Tx idle period for entering K1 should be 128 ns.
Minimum Tx idle period in K1 should be 256 ns.

Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>

PR: 258153
Reviewed by: erj
Tested by: iron.udjin@gmail.com
Approved by: imp
Obtained from: DPDK (6f934fa24dfd437c90ead96bc7598ee77a117ede)
MFC after: 1 week

e1000: expose FEXTNVM registers and masks

Adding defines for FEXTNVM8 and FEXTNVM12 registers with new masks for
future use.

Signed-off-by: Nir Efrati <nir.efrati@intel.com>
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>

Approved by: imp
Obtained from: DPDK (6d208ec099cd870a73c6b444b350a82c7a26c5e4)
MFC after: 1 week

e1000: modify HW level time sync mechanisms

Add additional configuration space access to allow HW
level time sync mechanism.

Signed-off-by: Evgeny Efimov <evgeny.efimov@intel.com>
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>

Approved by: imp
Obtained from: DPDK (d53391f1fe2e0eba8818517fdf285f893d95dcc8)
MFC after: 1 week

e1000: Update copyrights and readme

Copyrights in sync with "cid-gigabit.2020.06.05.tar.gz released by ND"
(from DPDK).

README from the latest em-7.7.8 on intel.com

Approved by: imp
MFC after: 1 week

e1000: Revert Update intel shared code

This reverts commit fc7682b17f3738573099b8b03f5628dcc8148adb.

This will be done incrementally to help with bisecting an issue in
later I21x devices (ich8lan).

PR: 258153
Approved by: imp
MFC after: 1 day

e1000: Update intel shared code

Sync the e1000 shared code with DPDK shared code
"cid-gigabit.2020.06.05.tar.gz released by ND"

Primary focus was on client platforms (ich8lan). More work remains here
but we need an Intel contact for client networking.

Reviewed by: grehan, Intel Networking (erj, earlier rev)
Obtained from: DPDK <http://git.dpdk.org/dpdk/tree/drivers/net/e1000/base>
MFC after: 1 week
Sponsored by: me
Differential Revision: https://reviews.freebsd.org/D31547

e1000: Add support for Ice Lake and Cannon Lake

Ths add initial support for Ice Lake and Cannon Lake ethernet devices.

This also addressed errata 1.5.4.4 for Sky Lake and Kabby Lake devices:
https://www.intel.com/content/dam/www/public/us/en/documents/specification-updates/i218-i219-ethernet-connection-spec-update.pdf?asset=9561

Submitted by: Kevin Bowling <kevin.bowling@kev009.com>
Relnotes: Yes
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D13660

sys/dev: further adoption of SPDX licensing ID tags.

Mainly focus on files that use BSD 3-Clause license.

The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.

Special thanks to Wind River for providing access to "The Duke of
Highlander" tool: an older (2014) run over FreeBSD tree was useful as a
starting point.

e1000: Add support for Kaby Lake IDs

Fixup some errors when transitioning to/from low power states.

Submitted by: erj
Reviewed by: Jeffery Piper (jeffrey.e.piper@intel.com)
MFC after: 3 days
Relnotes: yes
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D7478

Update em(4) to 7.6.1; update igb(4) to 2.5.3.

Major changes:

- Add i219/i219(2) hardware support. (Found on Skylake generation and newer
chipsets.)
- Further to the last Skylake support diff, this one also includes support for
the Lewisburg chipset (i219(3)).

- Add a workaround to an igb hardware errata.
All 1G server products need to have IPv6 extension header parsing turned off.
This should be listed in the specification updates for current 1G server
products, e.g. for i350 it's errata #37 in this document:
http://www.intel.com/content/dam/www/public/us/en/documents/specification-updates/ethernet-controller-i350-spec-update.pdf

- Avoton (i354) PHY errata workaround added

And a bunch of minor fixes, as well as #defines for things that the current
em(4)/igb(4) drivers don't implement.

Differential Revision: https://reviews.freebsd.org/D3162
Reviewed by: sbruno, marius, gnn
Approved by: gnn
MFC after: 2 weeks
Sponsored by: Intel Corporation

Revert 287914,287762.

Reports of breakage on igb(4) have been narrowed down to 287762 and 287914
is an dependant change.

Submitted by: erj

Update em(4) with D3162 after testing further on hardware that failed
to attach with the last version of this commit. This commit fixes
attach failures on "ICH8" class devices via modifications to
e1000_init_nvm_params_ich8lan()

- Fix compiler warning in 80003es2lan.c
- Add return value handler for e1000_*_kmrn_reg_80003es2lan
- Fix usage of DEBUGOUT
- Remove unnecessary variable initializations.
- Removed unused variables (complaints from gcc).
- Edit defines in 82571.h.
- Add workaround for igb hw errata.
- Shared code changes for Skylake/I219 support.
- Remove unused OBFF and LTR functions.

Tested by some of the folks that reported breakage in previous incarnation.
Thanks to AllanJude, gjb, gnn, tijl for tempting fate with their machines.

Submitted by: erj@freebsd.org
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D3162

Revert last two commits to em(4)/igb(4). Reports are coming in that
this breaks initialization and reads from EEPROM on boot/driver load.

r287469 is being reverted as a dependancy on r287467

e1000: Shared code updates
- Fix compiler warning in 80003es2lan.c
- Add return value handler for e1000_*_kmrn_reg_80003es2lan
- Fix usage of DEBUGOUT
- Remove unnecessary variable initializations.
- Removed unused variables (complaints from gcc).
- Edit defines in 82571.h.
- Add workaround for igb hw errata.
- Shared code changes for Skylake/I219 support.
- Remove unused OBFF and LTR functions.

Differential Revision: https://reviews.freebsd.org/D3162
Submitted by: erj
MFC after: 1 month
Sponsored by: Intel Corporation

Bump all copywrite dates to 2015

Differential Revision: https://reviews.freebsd.org/D3160
Submitted by: erj
MFC after: 2 weeks
Sponsored by: Intel Corportation

Sync the E1000 shared code with Intel internal, this adds fixes,
and more importantly, new I218 adapter support to the em driver.

MFC after: 1 week

Update the Intel igb driver to version 2.4.0
- This version has support for the new Intel Avoton systems,
including 2.5Gb support, further it now has IPv6/TSO6 support as
well. Shared code has been updated where necessary as well. Thanks
to my new assistant Eric Joyner for doing the transmit path changes
to bring in the IPv6/TSO6 support. Thanks to Gleb for catching the
one bug and change needed in NETMAP.

Approved by: re

Refresh on the shared code for the E1000 drivers.
- bear with me, there are lots of white space changes, I would not
do them, but I am a mere consumer of this stuff and if these drivers
are to stay in shape they need to be taken.

em driver changes: support for the new i217/i218 interfaces

igb driver changes:
- TX mq start has a quick turnaround to the stack
- Link/media handling improvement
- When link status changes happen the current flow control state
will now be displayed.
- A few white space/style changes.

lem driver changes:
- the shared code uncovered a bogus write to the RLPML register
(which does not exist in this hardware) in the vlan code,this
is removed.

Part 1 of two parts, this is the shared code changes in
support of new deltas for both em and igb drivers.

Note that I am not able to track all the bugs fixed in
this code, I am a consumer of it as a component of my
core drivers. It is important to keep the FreeBSD drivers
up to date with it however.

One important note is there is a key fix for 82574 in this
update. Also, there are lots of white space changes, I am
not happy about them but have no control over it :)

Fix the shared code to be consistent with Intel-internal,
and now build.

A new jail(8) with a configuration file, to replace the work currently done
by /etc/rc.d/jail.

Update code from Intel:
- Sync shared code with Intel internal
- New client chipset support added
- em driver - fixes to 82574, limit queues to 1 but use MSIX
- em driver - large changes in TX checksum offload and tso
code, thanks to yongari.
- some small changes for watchdog issues.
- igb driver - local timer watchdog code was missing locking
this and a couple other watchdog related fixes.
- bug in rx discard found by Andrew Boyer, check for null pointer

MFC: a week

MFC of the em/igb drivers

Update to igb and em:

em revision 7.0.0:
- Using driver devclass, seperate legacy (pre-pcie) code
into a seperate source file. This will at least help
protect against regression issues. It compiles along
with em, and is transparent to end use, devices in each
appear to be 'emX'. When using em in a modular form this
also allows the legacy stuff to be defined out.
- Add tx and rx rings as in igb, in the 82574 this becomes
actual multiqueue for the first time (2 queues) while in
other PCIE adapters its just make code cleaner.
- Add RX mbuf handling logic that matches igb, this will
eliminate packet drops due to temporary mbuf shortage.

igb revision 1.9.3:
- Following the ixgbe code, use a new approach in what
was called 'get_buf', the routine now has been made
independent of rxeof, it now does the update to the
engine TDT register, this design allows temporary
mbuf resources to become non-critical, not requiring
a packet to be discarded, instead it just returns and
does not increment the tail pointer.
- With the above change it was also unnecessary to keep
'spare' maps around, since we do not have the discard
issue.
- Performance tweaks and improvements to the code also.

MFC in a week

Update the 1G drivers, shared code sync with Intel,
igb now has a queue notion that has a single interrupt
with an RX/TX pair, this will reduce the total interrupts
seen on a system. Both em and igb have a new watchdog
method. igb has fixes from Pyun Yong-Hyeon that have
improved stability, thank you :)

I wish to MFC this for 7.3 asap, please test if able.

Resync with Intel versions of both the em and igb
drivers. These add new hardware support, most importantly
the pch (i5 chipset) in the em driver. Also, both drivers
now have the simplified (and I hope improved) watchdog
code. The igb driver uses the new RX cleanup that I
first implemented in ixgbe.

em - version 6.9.24
igb - version 1.8.4

Updates for both the em and igb drivers, add support
for multiqueue tx, shared code updates, new device
support, and some bug fixes.

This delta syncs the em and igb drivers with Intel,
adds header split and SCTP support into the igb driver.
Various small improvements and fixes.

MFC after: 2 weeks

This delta is primarily a fix for es2lan devices that
will sometimes fail to initialize problem due to a lock
contention with management hardware. However, in order to
deliver that fix it was necessary to take a shared code
update as a whole, and this required scattered changes in
the core code to be compatible.

The em driver now has VLAN HW support added as the igb
driver had previously.

MFC after: ASAP - in time for 7.1 RELEASE

- Import the HEAD csup code which is the basis for the cvsmode work.

Merge of the source for igb and em into dev/e1000, this
proved to be necessary to make the static drivers work
in EITHER/OR or BOTH configurations. Modules will still
build in sys/modules/igb or em as before.

This also updates the igb driver for support for the 82576
adapter, adds shared code fixes, and etc....

MFC after: ASAP