Remove $FreeBSD$: one-line forth tag

Remove /^\\[\s*]*\$FreeBSD\$.*$\n/

loader: support.4th resets the read buffer incorrectly

Large nextboot.conf files (over 80 bytes) are not read correctly by the
Forth loader, causing file parsing to abort, and nextboot configuration
fails to apply.

Simple repro:

nextboot -e foo=xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
shutdown -r now

That will cause the bug to cause a parse failure but shouldn't otherwise
affect the boot. Depending on your loader configuration, you may also
have to set beastie_disable and/or reduce the number of modules loaded
to see the error on a small console screen. 12.0 or CURRENT users will
also have to explicitly use the Forth loader instead of the Lua loader.
The error will look something like:

Warning: syntax error on file /boot/loader.conf.local
foo="xxxxxxxxxxxxxxnextboot_enable="YES"
^
/boot/support.4th has crude file I/O buffering, which uses a buffer
'read_buffer', defined to be 80 bytes by the 'read_buffer_size'
constant. The loader first tastes nextboot.conf, reading and parsing
the first line in it for nextboot_enable="YES". If this is true, then
it reopens the file and parses it like other loader .conf files.

Unfortunately, the file I/O buffering code does not fully reset the
buffer state in the reset_line_reading word. If the last file was read
to the end, that doesn't matter; the file buffer is treated as empty
anyway. But in the nextboot.conf case, the loader will not read to the
end of file if it is over 80 bytes, and the file buffer may be reused
when reading the next file. When the file is reread, the corrupt text
may cause file parsing to abort on bad syntax (if the corrupt line has
<>2 quotes in it), the wrong variable to be set, no variable to be set
at all, or (if the splice happens to land at a line ending) something
approximating normal operation.

The bug is very old, dating back to at least 2000 if not before, and is
still present in 12.0 and CURRENT r345863 (though it is now hidden by
the Lua loader by default).

Suggested one-line attached. This does change the behavior of the
reset_line_reading word, which is exported in the line-reading
dictionary (though the export is not documented in loader man pages).
But repo history shows it was probably exported for the PNP support
code, which was never included in the loader build, and was removed 5
months ago.

One thing that puzzles me: how has this bug gone unnoticed/unfixed for
nearly 2 decades? I find it hard to believe that nobody's tried to do
something interesting with nextboot, like load a kernel and filesystem,
which is what I'm doing.

Tested by: Gary Jennejohn
PR: 239315
MFC After: 3 weeks
Reviewed by: imp (and correctly applied this time)
Differential Revision: https://reviews.freebsd.org/D31328

Revert "loader: support.4th resets the read buffer incorrectly"

This reverts commit 9c1c02093b90ae49745a174eb26ea85dd1990eec. It seems
to have broken all old nextboot.conf files causing hangs on boot.

Sponsored by: Netflix

loader: support.4th resets the read buffer incorrectly

Large nextboot.conf files (over 80 bytes) are not read correctly by the
Forth loader, causing file parsing to abort, and nextboot configuration
fails to apply.

Simple repro:

nextboot -e foo=xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
shutdown -r now

That will cause the bug to cause a parse failure but shouldn't otherwise
affect the boot. Depending on your loader configuration, you may also
have to set beastie_disable and/or reduce the number of modules loaded
to see the error on a small console screen. 12.0 or CURRENT users will
also have to explicitly use the Forth loader instead of the Lua loader.
The error will look something like:

Warning: syntax error on file /boot/loader.conf.local
foo="xxxxxxxxxxxxxxnextboot_enable="YES"
^
/boot/support.4th has crude file I/O buffering, which uses a buffer
'read_buffer', defined to be 80 bytes by the 'read_buffer_size'
constant. The loader first tastes nextboot.conf, reading and parsing
the first line in it for nextboot_enable="YES". If this is true, then
it reopens the file and parses it like other loader .conf files.

Unfortunately, the file I/O buffering code does not fully reset the
buffer state in the reset_line_reading word. If the last file was read
to the end, that doesn't matter; the file buffer is treated as empty
anyway. But in the nextboot.conf case, the loader will not read to the
end of file if it is over 80 bytes, and the file buffer may be reused
when reading the next file. When the file is reread, the corrupt text
may cause file parsing to abort on bad syntax (if the corrupt line has
<>2 quotes in it), the wrong variable to be set, no variable to be set
at all, or (if the splice happens to land at a line ending) something
approximating normal operation.

The bug is very old, dating back to at least 2000 if not before, and is
still present in 12.0 and CURRENT r345863 (though it is now hidden by
the Lua loader by default).

Suggested one-line attached. This does change the behavior of the
reset_line_reading word, which is exported in the line-reading
dictionary (though the export is not documented in loader man pages).
But repo history shows it was probably exported for the PNP support
code, which was never included in the loader build, and was removed 5
months ago.

One thing that puzzles me: how has this bug gone unnoticed/unfixed for
nearly 2 decades? I find it hard to believe that nobody's tried to do
something interesting with nextboot, like load a kernel and filesystem,
which is what I'm doing.

PR: 239315
Reviewed by: imp

loader: implement framebuffer console

Draw console on efi.
Add vbe framebuffer for BIOS loader (vbe off, vbe on, vbe list,
vbe set xxx).
autoload font (/boot/fonts) based on resolution and font size.
Add command loadfont (set font by file) and
variable screen.font (set font by size). Pass loaded font to kernel.

Export variables:
screen.height
screen.width
screen.depth

Add gfx primitives to draw the screen and put png image on the screen.
Rework menu draw to iterate list of consoles to enamble device specific
output.

Probably something else I forgot...

Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D27420

loader: zfs should support bootonce an nextboot

bootonce feature is temporary, one time boot, activated by
"bectl activate -t BE", "bectl activate -T BE" will reset the bootonce flag.

By default, the bootonce setting is reset on attempt to boot and the next
boot will use previously active BE.

By setting zfs_bootonce_activate="YES" in rc.conf, the bootonce BE will
be set permanently active.

bootonce dataset name is recorded in boot pool labels, bootenv area.

in case of nextboot, the nextboot_enable boolean variable is recorded in
freebsd:nvstore nvlist, also stored in boot pool label bootenv area.
On boot, the loader will process /boot/nextboot.conf if nextboot_enable
is "YES", and will set nextboot_enable to "NO", preventing /boot/nextboot.conf
processing on next boot.

bootonce and nextboot features are usable in both UEFI and BIOS boot.

To use bootonce/nextboot features, the boot loader needs to be updated on disk;
if loader.efi is stored on ESP, then ESP needs to be updated and
for BIOS boot, stage2 (zfsboot or gptzfsboot) needs to be updated
(gpart or other tools).

At this time, only lua loader is updated.

Sponsored by: Netflix, Klara Inc.
Differential Revision: https://reviews.freebsd.org/D25512

loader_4th: scan_buffer can leave empty string on stack

When the file processing is done, we will have string with lenght 0 in stack and we will attempt to
allocate 0 bytes.

Move sys/boot to stand. Fix all references to new location

Sponsored by: Netflix