#
acbc176c |
|
22-Mar-2024 |
John Baldwin <jhb@FreeBSD.org> |
nvmecontrol: Display additional Fabrics-related fields for cdata Some of these fields are specific to Fabrics controllers (such as the size of capsules) while other fields are shared with PCI-e controllers, but are more relevant for Fabrics controllers (such as KeepAlive timer properties). Reviewed by: imp Sponsored by: Chelsio Communications Differential Revision: https://reviews.freebsd.org/D44449
|
#
fba73a40 |
|
29-Jan-2024 |
John Baldwin <jhb@FreeBSD.org> |
nvmecontrol: Use the NVMEV macro instead of expanded versions Reviewed by: imp Sponsored by: Chelsio Communications Differential Revision: https://reviews.freebsd.org/D43597
|
#
32e86a82 |
|
24-Nov-2023 |
Warner Losh <imp@FreeBSD.org> |
sbin: Automated cleanup of cdefs and other formatting Apply the following automated changes to try to eliminate no-longer-needed sys/cdefs.h includes as well as now-empty blank lines in a row. Remove /^#if.*\n#endif.*\n#include\s+<sys/cdefs.h>.*\n/ Remove /\n+#include\s+<sys/cdefs.h>.*\n+#if.*\n#endif.*\n+/ Remove /\n+#if.*\n#endif.*\n+/ Remove /^#if.*\n#endif.*\n/ Remove /\n+#include\s+<sys/cdefs.h>\n#include\s+<sys/types.h>/ Remove /\n+#include\s+<sys/cdefs.h>\n#include\s+<sys/param.h>/ Remove /\n+#include\s+<sys/cdefs.h>\n#include\s+<sys/capsicum.h>/ Sponsored by: Netflix
|
#
1d386b48 |
|
16-Aug-2023 |
Warner Losh <imp@FreeBSD.org> |
Remove $FreeBSD$: one-line .c pattern Remove /^[\s*]*__FBSDID\("\$FreeBSD\$"\);?\s*\n/
|
#
4d846d26 |
|
10-May-2023 |
Warner Losh <imp@FreeBSD.org> |
spdx: The BSD-2-Clause-FreeBSD identifier is obsolete, drop -FreeBSD The SPDX folks have obsoleted the BSD-2-Clause-FreeBSD identifier. Catch up to that fact and revert to their recommended match of BSD-2-Clause. Discussed with: pfg MFC After: 3 days Sponsored by: Netflix
|
#
41be508d |
|
19-Nov-2022 |
Wanpeng Qian <wanpengqian@gmail.com> |
nvmecontrol: Fix IEEE OUI Identifier output Current sequence of IEEE OUI Identifier output is wrong. For Intel, current output is e4 d2 5c, specification is 5CD2E4h For Samsung, current output is 38 25 00, specification is 002538h also check with Linux nvme-cli. Reviewed by: imp, chuck MFC after: 2 weeks Differential Revision: https://reviews.freebsd.org/D33856
|
#
0fd43b0c |
|
14-Nov-2022 |
Wanpeng Qian <wanpengqian@gmail.com> |
nvmecontrol: Fix condition when print number of Firmware Slots and Firmware Slot1 Readonly. The Number of Firmware Slots should never be zero. So, a Firmware Slot 1 should always exist. For that reason, always print the Number of Firmware Slots and the Firmware Slot 1 Read-Only value. Reviewed by: imp Approved by: manu (mentor) MFC after: 1 week Differential Revision: https://reviews.freebsd.org/D34700
|
#
ae5a522c |
|
21-Sep-2021 |
Allan Jude <allanjude@FreeBSD.org> |
nvmecontrol: Display Metadata and Sanitize capabilities of the device Determine if a device supports "Extended" or "Separate" metadata, and what the current metadata setting is (None, Extended, Separate) Also determine if the device supports: - Sanitize Crypto Erase - Sanitize Block Erase - Sanitize Overwrite Reviewed by: chuck Sponsored by: NetApp, Inc. Sponsored by: Klara, Inc. X-NetApp-PR: #49 Differential Revision: https://reviews.freebsd.org/D31067
|
#
95a74ab4 |
|
07-May-2021 |
Edward Tomasz Napierala <trasz@FreeBSD.org> |
nvmecontrol: fix typo (s/Managment/Management/) Reported By: pstef
|
#
16969d14 |
|
21-Sep-2020 |
David Bright <dab@FreeBSD.org> |
Honor the FWUG value of some drives in nvmecontrol nvmecontrol tries to upload firmware in chunks as large as it thinks the device permits. It fails to take into account the FWUG value used by some drives to advertise the size and alignment limits for firmware chunks. - Use the firwmare update granularity value from the - If the granularity is not reported or not restricted, fall back to the previously existing logic that calculates the max transfer size based on MDTS. - Add firmware update granularity to the identify-controller output. Reviewed by: imp (previous version), chuck Obtained from: Dell EMC Isilon MFC after: 1 week Sponsored by: Dell EMC Isilon Differential Revision: https://reviews.freebsd.org/D26390
|
#
83018b79 |
|
05-Jan-2020 |
Alexander Motin <mav@FreeBSD.org> |
Fix host memory buffer sizes reporting. Hardware reports values in 4KB units, not in bytes. MFC after: 3 days
|
#
10bb6d35 |
|
04-Sep-2019 |
Warner Losh <imp@FreeBSD.org> |
Report the Host Buffer Memory minimum and preferred sizes. The Host Buffer feature (NVMe 1.4 section 89) allows for the NVMe card request the host provide it buffer for lookaside tables and maybe other things. Report the card's minimum and preferred sizes with nvmecontrol/camcontrol identify.
|
#
4035e778 |
|
14-Aug-2019 |
Alexander Motin <mav@FreeBSD.org> |
Print few more useful identify fields. MFC after: 2 weeks
|
#
278ba86c |
|
03-Aug-2019 |
Alexander Motin <mav@FreeBSD.org> |
Add `nvmecontrol sanitize` command. It allows to delete all user data from NVM subsystem in one of 3 methods. It is a close equivalent of SCSI SANITIZE command of `camcontrol sanitize`, so I tried to keep arguments as close as possible. While there, fix supported sanitize methods reporting in `identify`. MFC after: 2 weeks Relnotes: yes Sponsored by: iXsystems, Inc.
|
#
a7bf63be |
|
01-Aug-2019 |
Alexander Motin <mav@FreeBSD.org> |
Add IOCTL to translate nvdX into nvmeY and NSID. While very useful by itself, it also makes `nvmecontrol` not depend on hardcoded device names parsing, that in its turn makes simple to take nvdX (and potentially any other) device names as arguments. Also added IOCTL bypass from nvdX to respective nvmeYnsZ makes them interchangeable for management purposes. MFC after: 2 weeks Sponsored by: iXsystems, Inc.
|
#
3b3dd3f7 |
|
31-Jul-2019 |
Alexander Motin <mav@FreeBSD.org> |
Feature-complete NVMe Namespace Management. This adds several previously missed but important subcommands to list namespaces and controllers. It also fixes few previously added but just found with real testing to be broken subcommands. Also while there, add possibility to explicitly specify nsid for `nvmecontrol identify` subcommand. It may be useful to specify nsids not having own devices, for example 0xffffffff, or just newly created ones. MFC after: 2 weeks Relnotes: yes Sponsored by: iXsystems, Inc.
|
#
8de2d8c0 |
|
28-Jul-2019 |
Alexander Motin <mav@FreeBSD.org> |
Add some new fields and bits from NVMe 1.4. MFC after: 2 weeks Sponsored by: iXsystems, Inc.
|
#
e505b7ec |
|
13-Jun-2018 |
Warner Losh <imp@FreeBSD.org> |
Make it possible to use print_controller from another program Rename print_controller to nvme_print_controller. Put it in its own file for easy inclusion. Move util.c to be nc_util.c to not conflict with camcontrol. add nvecontrol_ext.h to define shared interfaces. Sponsored by: Netflix Differential Revision: https://reviews.freebsd.org/D15371
|