#
0b8224d1 |
|
24-Nov-2023 |
Warner Losh <imp@FreeBSD.org> |
Remove copyright strings ifdef'd out We've ifdef'd out the copyright strings for some time now. Go ahead and remove the ifdefs. Plus whatever other detritis was left over from other recent removals. These copyright strings are present in the comments and are largely from CSRG's attempt at adding their copyright to every binary file (which modern interpretations of the license doesn't require). Sponsored by: Netflix
|
#
51e16cb8 |
|
23-Nov-2023 |
Warner Losh <imp@FreeBSD.org> |
sbin: Remove ancient SCCS tags. Remove ancient SCCS tags from the tree, automated scripting, with two minor fixup to keep things compiling. All the common forms in the tree were removed with a perl script. Sponsored by: Netflix
|
#
1d386b48 |
|
16-Aug-2023 |
Warner Losh <imp@FreeBSD.org> |
Remove $FreeBSD$: one-line .c pattern Remove /^[\s*]*__FBSDID\("\$FreeBSD\$"\);?\s*\n/
|
#
9fc5d538 |
|
13-Nov-2018 |
Kirk McKusick <mckusick@FreeBSD.org> |
In preparation for adding inode check-hashes, clean up and document the libufs interface for fetching and storing inodes. The undocumented getino / putino interface has been replaced with a new getinode / putinode interface. Convert the utilities that had been using the undocumented interface to use the new documented interface. No functional change (as for now the libufs library does not do inode check-hashes). Reviewed by: kib Tested by: Peter Holm Sponsored by: Netflix
|
#
a3d27cad |
|
31-Oct-2018 |
Kirk McKusick <mckusick@FreeBSD.org> |
In preparation for adding inode check-hashes, convert the clri(8) program to use the libufs library interface. No functional change (as for now the libufs library does not do inode check-hashes). Reviewed by: kib Sponsored by: Netflix
|
#
dffce215 |
|
25-Jan-2018 |
Kirk McKusick <mckusick@FreeBSD.org> |
Refactoring of reading and writing of the UFS/FFS superblock. Specifically reading is done if ffs_sbget() and writing is done in ffs_sbput(). These functions are exported to libufs via the sbget() and sbput() functions which then used in the various filesystem utilities. This work is in preparation for adding subperblock check hashes. No functional change intended. Reviewed by: kib
|
#
8a16b7a1 |
|
20-Nov-2017 |
Pedro F. Giffuni <pfg@FreeBSD.org> |
General further adoption of SPDX licensing ID tags. Mainly focus on files that use BSD 3-Clause license. The Software Package Data Exchange (SPDX) group provides a specification to make it easier for automated tools to detect and summarize well known opensource licenses. We are gradually adopting the specification, noting that the tags are considered only advisory and do not, in any way, superceed or replace the license texts. Special thanks to Wind River for providing access to "The Duke of Highlander" tool: an older (2014) run over FreeBSD tree was useful as a starting point.
|
#
fbbd9655 |
|
28-Feb-2017 |
Warner Losh <imp@FreeBSD.org> |
Renumber copyright clause 4 Renumber cluase 4 to 3, per what everybody else did when BSD granted them permission to remove clause 3. My insistance on keeping the same numbering for legal reasons is too pedantic, so give up on that point. Submitted by: Jan Schaumann <jschauma@stevens.edu> Pull Request: https://github.com/freebsd/freebsd/pull/96
|
#
a7d5f7eb |
|
19-Oct-2010 |
Jamie Gritton <jamie@FreeBSD.org> |
A new jail(8) with a configuration file, to replace the work currently done by /etc/rc.d/jail.
|
#
fe0506d7 |
|
09-Mar-2010 |
Marcel Moolenaar <marcel@FreeBSD.org> |
Create the altix project branch. The altix project will add support for the SGI Altix 350 to FreeBSD/ia64. The hardware used for porting is a two-module system, consisting of a base compute module and a CPU expansion module. SGI's NUMAFlex architecture can be an excellent platform to test CPU affinity and NUMA-aware features in FreeBSD.
|
#
d7f03759 |
|
19-Oct-2008 |
Ulf Lilleengen <lulf@FreeBSD.org> |
- Import the HEAD csup code which is the basis for the cvsmode work.
|
#
56589eb7 |
|
19-Nov-2007 |
John Birrell <jb@FreeBSD.org> |
Use an intermediate pointer to avoid strict alias check warnings on gcc 4.2. This is required for tinderbox which doesn't have -f-no-strict-aliasing in it's custom CFLAGS.
|
#
8a1dff0c |
|
29-May-2005 |
Philippe Charnier <charnier@FreeBSD.org> |
Give variable an initial value. Use errx() instead of fprintf().
|
#
4c723140 |
|
09-Apr-2004 |
Mark Murray <markm@FreeBSD.org> |
Remove advertising clause from University of California Regent's license, per letter dated July 22, 1999. Approved by: core, imp
|
#
c69284ca |
|
03-May-2003 |
David E. O'Brien <obrien@FreeBSD.org> |
Use __FBSDID() to quiet GCC 3.3 warnings.
|
#
ada981b2 |
|
26-Nov-2002 |
Kirk McKusick <mckusick@FreeBSD.org> |
Create a new 32-bit fs_flags word in the superblock. Add code to move the old 8-bit fs_old_flags to the new location the first time that the filesystem is mounted by a new kernel. One of the unused flags in fs_old_flags is used to indicate that the flags have been moved. Leave the fs_old_flags word intact so that it will work properly if used on an old kernel. Change the fs_sblockloc superblock location field to be in units of bytes instead of in units of filesystem fragments. The old units did not work properly when the fragment size exceeeded the superblock size (8192). Update old fs_sblockloc values at the same time that the flags are moved. Suggested by: BOUWSMA Barry <freebsd-misuser@netscum.dyndns.dk> Sponsored by: DARPA & NAI Labs.
|
#
5e152c79 |
|
31-Aug-2002 |
Tom Rhodes <trhodes@FreeBSD.org> |
use 'file system superblock' for the error message. This will match other disk utilities. Discussed with: bde
|
#
a48ea640 |
|
25-Aug-2002 |
Tom Rhodes <trhodes@FreeBSD.org> |
Print a more realistic usage message 'special_device' 'inode_number'. This matches the synopsis given in the manual page. MFC after: 3 days
|
#
ce66ddb7 |
|
21-Aug-2002 |
Tom Rhodes <trhodes@FreeBSD.org> |
s/filesystem/file system/g as discussed on -developers
|
#
06e8d954 |
|
03-Jul-2002 |
Mark Murray <markm@FreeBSD.org> |
Apply __FBSDID(), ISOfy, fix easy warning.
|
#
1c85e6a3 |
|
21-Jun-2002 |
Kirk McKusick <mckusick@FreeBSD.org> |
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
|
#
75766e17 |
|
12-May-2002 |
Poul-Henning Kamp <phk@FreeBSD.org> |
Sigh, more BBSIZE related breakage. Sponsored by: DARPA & NAI Labs.
|
#
582236c5 |
|
19-Mar-2002 |
Warner Losh <imp@FreeBSD.org> |
Kill register
|
#
7f3dea24 |
|
27-Aug-1999 |
Peter Wemm <peter@FreeBSD.org> |
$Id$ -> $FreeBSD$
|
#
ec74b3f3 |
|
04-Jun-1998 |
Philippe Charnier <charnier@FreeBSD.org> |
Correct .Nm. Spelling. Add rcsid, remove unused #includes. Add usage(). Do not dot-terminate errx() strings.
|
#
25e43cba |
|
01-Jul-1997 |
Bruce Evans <bde@FreeBSD.org> |
Import Lite2's src/sbin, except for XNSrouted and routed. All relevant files in src/sbin are off the vendor branch, so this doesn't change the active versions.
|
#
a715c4a4 |
|
04-Jun-1997 |
Philippe Charnier <charnier@FreeBSD.org> |
Use errx instead of fprintf/exit.
|
#
8fae3551 |
|
26-May-1994 |
Rodney W. Grimes <rgrimes@FreeBSD.org> |
BSD 4.4 Lite sbin Sources Note: XNSrouted and routed NOT imported here, they shall be imported with usr.sbin.
|