ssh: Update to OpenSSH 9.7p1

This release contains mostly bugfixes.

It also makes support for the DSA signature algorithm a compile-time
option, with plans to disable it upstream later this year and remove
support entirely in 2025.

Full release notes at https://www.openssh.com/txt/release-9.7

Relnotes: Yes
Sponsored by: The FreeBSD Foundation

ssh: Update to OpenSSH 9.6p1

From the release notes,

> This release contains a number of security fixes, some small features
> and bugfixes.

The most significant change in 9.6p1 is a set of fixes for a newly-
discovered weakness in the SSH transport protocol. The fix was already
merged into FreeBSD and released as FreeBSD-SA-23:19.openssh.

Full release notes at https://www.openssh.com/txt/release-9.6

Relnotes: Yes
Sponsored by: The FreeBSD Foundation

ssh: Update to OpenSSH 9.5p1

Excerpts from the release notes:

Potentially incompatible changes
--------------------------------

* ssh-keygen(1): generate Ed25519 keys by default.
[NOTE: This change was already merged into FreeBSD.]

* sshd(8): the Subsystem directive now accurately preserves quoting of
subsystem commands and arguments.

New features
------------

* ssh(1): add keystroke timing obfuscation to the client.

* ssh(1), sshd(8): Introduce a transport-level ping facility.

* sshd(8): allow override of Sybsystem directives in sshd Match blocks.

Full release notes at https://www.openssh.com/txt/release-9.5

Relnotes: Yes
Sponsored by: The FreeBSD Foundation

ssh: Update to OpenSSH 9.4p1

Excerpts from the release notes:

* ssh-agent(1): PKCS#11 modules must now be specified by their full
paths. Previously dlopen(3) could search for them in system
library directories.

* ssh(1): allow forwarding Unix Domain sockets via ssh -W.

* ssh(1): add support for configuration tags to ssh(1).
This adds a ssh_config(5) "Tag" directive and corresponding
"Match tag" predicate that may be used to select blocks of
configuration similar to the pf.conf(5) keywords of the same
name.

* ssh(1): add a "match localnetwork" predicate. This allows matching
on the addresses of available network interfaces and may be used to
vary the effective client configuration based on network location.

* ssh-agent(1): improve isolation between loaded PKCS#11 modules
by running separate ssh-pkcs11-helpers for each loaded provider.

* ssh-agent(1), ssh(1): improve defences against invalid PKCS#11
modules being loaded by checking that the requested module
contains the required symbol before loading it.

* ssh(1): don't incorrectly disable hostname canonicalization when
CanonicalizeHostname=yes and ProxyJump was expicitly set to
"none". bz3567

Full release notes at https://www.openssh.com/txt/release-9.4

Relnotes: Yes
Sponsored by: The FreeBSD Foundation

ssh: Update to OpenSSH 9.3p1

This release fixes a number of security bugs and has minor new
features and bug fixes. Security fixes, from the release notes
(https://www.openssh.com/txt/release-9.3):

This release contains fixes for a security problem and a memory
safety problem. The memory safety problem is not believed to be
exploitable, but we report most network-reachable memory faults as
security bugs.

* ssh-add(1): when adding smartcard keys to ssh-agent(1) with the
per-hop destination constraints (ssh-add -h ...) added in OpenSSH
8.9, a logic error prevented the constraints from being
communicated to the agent. This resulted in the keys being added
without constraints. The common cases of non-smartcard keys and
keys without destination constraints are unaffected. This problem
was reported by Luci Stanescu.

* ssh(1): Portable OpenSSH provides an implementation of the
getrrsetbyname(3) function if the standard library does not
provide it, for use by the VerifyHostKeyDNS feature. A
specifically crafted DNS response could cause this function to
perform an out-of-bounds read of adjacent stack data, but this
condition does not appear to be exploitable beyond denial-of-
service to the ssh(1) client.

The getrrsetbyname(3) replacement is only included if the system's
standard library lacks this function and portable OpenSSH was not
compiled with the ldns library (--with-ldns). getrrsetbyname(3) is
only invoked if using VerifyHostKeyDNS to fetch SSHFP records. This
problem was found by the Coverity static analyzer.

Sponsored by: The FreeBSD Foundation

ssh: fix leak and apply style(9) to hostname canonicalization

Fixes: bf2e2524a2ce ("ssh: canonicize the host name before...")
Fixes: 3e74849a1ee2 ("ssh: canonicize the host name before...")
Reviewed by: rew
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D38441

ssh: update to OpenSSH 9.2p1

Release notes are available at https://www.openssh.com/txt/release-9.2

OpenSSH 9.2 contains fixes for two security problems and a memory safety
problem. The memory safety problem is not believed to be exploitable.
These fixes have already been committed to OpenSSH 9.1 in FreeBSD.

Some other notable items from the release notes:

* ssh(1): add a new EnableEscapeCommandline ssh_config(5) option that
controls whether the client-side ~C escape sequence that provides a
command-line is available. Among other things, the ~C command-line
could be used to add additional port-forwards at runtime.

* sshd(8): add support for channel inactivity timeouts via a new
sshd_config(5) ChannelTimeout directive. This allows channels that
have not seen traffic in a configurable interval to be
automatically closed. Different timeouts may be applied to session,
X11, agent and TCP forwarding channels.

* sshd(8): add a sshd_config UnusedConnectionTimeout option to
terminate client connections that have no open channels for a
length of time. This complements the ChannelTimeout option above.

* sshd(8): add a -V (version) option to sshd like the ssh client has.

* scp(1), sftp(1): add a -X option to both scp(1) and sftp(1) to
allow control over some SFTP protocol parameters: the copy buffer
length and the number of in-flight requests, both of which are used
during upload/download. Previously these could be controlled in
sftp(1) only. This makes them available in both SFTP protocol
clients using the same option character sequence.

* ssh-keyscan(1): allow scanning of complete CIDR address ranges,
e.g. "ssh-keyscan 192.168.0.0/24". If a CIDR range is passed, then
it will be expanded to all possible addresses in the range
including the all-0s and all-1s addresses. bz#976

* ssh(1): support dynamic remote port forwarding in escape
command-line's -R processing. bz#3499

MFC after: 1 week
Sponsored by: The FreeBSD Foundation

ssh: Be more paranoid with host/domain names coming from the

never write a name with bad characters to a known_hosts file.

replace recently-added valid_domain() check for hostnames going to
known_hosts with a more relaxed check for bad characters.

Obtained from: OpenSSH-portable commit 445363433ba2
Obtained from: OpenSSH-portable commit 3cae9f92a318
Sponsored by: The FreeBSD Foundation

ssh: update to OpenSSH 9.1p1

Release notes are available at https://www.openssh.com/txt/release-9.1

9.1 contains fixes for three minor memory safety problems; these have
lready been merged to the copy of OpenSSH 9.0 that is in the FreeBSD base
system.

Some highlights copied from the release notes:

Potentially-incompatible changes
--------------------------------

* ssh(1), sshd(8): SetEnv directives in ssh_config and sshd_config
are now first-match-wins to match other directives. Previously
if an environment variable was multiply specified the last set
value would have been used. bz3438

* ssh-keygen(8): ssh-keygen -A (generate all default host key types)
will no longer generate DSA keys, as these are insecure and have
not been used by default for some years.

New features
------------

* ssh(1), sshd(8): add a RequiredRSASize directive to set a minimum
RSA key length. Keys below this length will be ignored for user
authentication and for host authentication in sshd(8).

* sftp-server(8): add a "users-groups-by-id@openssh.com" extension
request that allows the client to obtain user/group names that
correspond to a set of uids/gids.

* sftp(1): use "users-groups-by-id@openssh.com" sftp-server
extension (when available) to fill in user/group names for
directory listings.

* sftp-server(8): support the "home-directory" extension request
defined in draft-ietf-secsh-filexfer-extensions-00. This overlaps
a bit with the existing "expand-path@openssh.com", but some other
clients support it.

* ssh-keygen(1), sshd(8): allow certificate validity intervals,
sshsig verification times and authorized_keys expiry-time options
to accept dates in the UTC time zone in addition to the default
of interpreting them in the system time zone. YYYYMMDD and
YYMMDDHHMM[SS] dates/times will be interpreted as UTC if suffixed
with a 'Z' character.

Also allow certificate validity intervals to be specified in raw
seconds-since-epoch as hex value, e.g. -V 0x1234:0x4567890. This
is intended for use by regress tests and other tools that call
ssh-keygen as part of a CA workflow. bz3468

* sftp(1): allow arguments to the sftp -D option, e.g. sftp -D
"/usr/libexec/sftp-server -el debug3"

* ssh-keygen(1): allow the existing -U (use agent) flag to work
with "-Y sign" operations, where it will be interpreted to require
that the private keys is hosted in an agent; bz3429

MFC after: 2 weeks
Relnotes: Yes
Sponsored by: The FreeBSD Foundation

ssh: retire client VersionAddendum

FreeBSD introduced VersionAddendum for the server as a local change in
2001 in commit 933ca70f8f88 and later extended it to the client in
commit 9e2cbe04ff4f.

In 2012 upstream added support for server VersionAddendum, in commit
23528816dc10. They do not support it for the client.

The argument for supporting this in the client is not nearly as strong
as for the server, so retire this option to reduce the scope of our
local patch set. This also avoids some cases of conflicts in ssh_config
during update, as a user's configuration would typically follow the
commented-out default VersionAddendum value.

Reviewed by: gordon, glebius
Relnotes: yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D32930

ssh: use upstream SSH_OPENSSL_VERSION macro

With the upgrade to OpenSSH 6.7p1 in commit a0ee8cc636cd we replaced
WITH_OPENSSL ifdefs with an OPENSSL_VERSION macro, later changing it
to OPENSSL_VERSION_STRING.

A few years later OpenSSH made an equivalent change (with a different
macro name), in commit 4d94b031ff88. Switch to the macro name they
chose.

MFC after: 1 week
Sponsored by: The FreeBSD Foundation

ssh: drop $FreeBSD$ from crypto/openssh

After we moved to git $FreeBSD$ is no longer expanded and serves no
purpose. Remove them from OpenSSH to reduce diffs against upstream.

Sponsored by: The FreeBSD Foundation

ssh: apply style(9) to version_addendum

Reported by: allanjude (in review D29953)
Fixes: 462c32cb8d7a ("Upgrade OpenSSH to 6.1p1.")
MFC after: 1 week
Sponsored by: The FreeBSD Foundation

ssh: update to OpenSSH v9.0p1

Release notes are available at https://www.openssh.com/txt/release-9.0

Some highlights:

* ssh(1), sshd(8): use the hybrid Streamlined NTRU Prime + x25519 key
exchange method by default ("sntrup761x25519-sha512@openssh.com").
The NTRU algorithm is believed to resist attacks enabled by future
quantum computers and is paired with the X25519 ECDH key exchange
(the previous default) as a backstop against any weaknesses in
NTRU Prime that may be discovered in the future. The combination
ensures that the hybrid exchange offers at least as good security
as the status quo.

* sftp-server(8): support the "copy-data" extension to allow server-
side copying of files/data, following the design in
draft-ietf-secsh-filexfer-extensions-00. bz2948

* sftp(1): add a "cp" command to allow the sftp client to perform
server-side file copies.

This commit excludes the scp(1) change to use the SFTP protocol by
default; that change will immediately follow.

MFC after: 1 month
Relnotes: Yes
Sponsored by: The FreeBSD Foundation

ssh: update to OpenSSH v8.9p1

Release notes are available at https://www.openssh.com/txt/release-8.9

Some highlights:

* ssh(1), sshd(8), ssh-add(1), ssh-agent(1): add a system for
restricting forwarding and use of keys added to ssh-agent(1)

* ssh(1), sshd(8): add the sntrup761x25519-sha512@openssh.com hybrid
ECDH/x25519 + Streamlined NTRU Prime post-quantum KEX to the
default KEXAlgorithms list (after the ECDH methods but before the
prime-group DH ones). The next release of OpenSSH is likely to
make this key exchange the default method.

* sshd(8), portable OpenSSH only: this release removes in-built
support for MD5-hashed passwords. If you require these on your
system then we recommend linking against libxcrypt or similar.

Future deprecation notice
=========================

A near-future release of OpenSSH will switch scp(1) from using the
legacy scp/rcp protocol to using SFTP by default.

Legacy scp/rcp performs wildcard expansion of remote filenames (e.g.
"scp host:* .") through the remote shell. This has the side effect of
requiring double quoting of shell meta-characters in file names
included on scp(1) command-lines, otherwise they could be interpreted
as shell commands on the remote side.

MFC after: 1 month
Relnotes: Yes
Sponsored by: The FreeBSD Foundation

ssh: update to OpenSSH v8.8p1

OpenSSH v8.8p1 was motivated primarily by a security update and
deprecation of RSA/SHA1 signatures. It also has a few minor bug fixes.

The security update was already applied to FreeBSD as an independent
change, and the RSA/SHA1 deprecation is excluded from this commit but
will immediately follow.

MFC after: 1 month
Relnotes: Yes
Sponsored by: The FreeBSD Foundation

openssh: update to OpenSSH v8.7p1

Some notable changes, from upstream's release notes:

- sshd(8): Remove support for obsolete "host/port" syntax.
- ssh(1): When prompting whether to record a new host key, accept the key
fingerprint as a synonym for "yes".
- ssh-keygen(1): when acting as a CA and signing certificates with an RSA
key, default to using the rsa-sha2-512 signature algorithm.
- ssh(1), sshd(8), ssh-keygen(1): this release removes the "ssh-rsa"
(RSA/SHA1) algorithm from those accepted for certificate signatures.
- ssh-sk-helper(8): this is a new binary. It is used by the FIDO/U2F
support to provide address-space isolation for token middleware
libraries (including the internal one).
- ssh(1): this release enables UpdateHostkeys by default subject to some
conservative preconditions.
- scp(1): this release changes the behaviour of remote to remote copies
(e.g. "scp host-a:/path host-b:") to transfer through the local host
by default.
- scp(1): experimental support for transfers using the SFTP protocol as
a replacement for the venerable SCP/RCP protocol that it has
traditionally used.

Additional integration work is needed to support FIDO/U2F in the base
system.

Deprecation Notice
------------------

OpenSSH will disable the ssh-rsa signature scheme by default in the
next release.

Reviewed by: imp
MFC after: 1 month
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D29985

Upgrade to OpenSSH 7.9p1.

MFC after: 2 months
Sponsored by: The FreeBSD Foundation

openssh: rename local macro to avoid OpenSSL 1.1.1 conflict

Local changes introduced an OPENSSH_VERSION macro, but this conflicts
with a macro of the same name introduced with OepnsSL 1.1.1

Reviewed by: des
Approved by: re (gjb)
MFC after: 1 week
Sponsored by: The FreeBSD Foundation

Upgrade to OpenSSH 7.8p1.

Approved by: re (kib@)

Upgrade to OpenSSH 7.7p1.

Upgrade to OpenSSH 7.6p1. This will be followed shortly by 7.7p1.

This completely removes client-side support for the SSH 1 protocol,
which was already disabled in 12 but is still enabled in 11. For that
reason, we will not be able to merge 7.6p1 or newer back to 11.

Upgrade to OpenSSH 7.5p1.

Upgrade to OpenSSH 7.4p1.

Upgrade to OpenSSH 7.3p1.

Upgrade to OpenSSH 7.2p2.

Explain why we don't include VersionAddendum in the debug mode banner.

Upgrade to OpenSSH 7.0p1.

Upgrade to OpenSSH 6.9p1.

Upgrade to OpenSSH 6.8p1.

Upgrade to OpenSSH 6.7p1, retaining libwrap support (which has been removed
upstream) and a number of security fixes which we had already backported.

MFC after: 1 week

As previously threatened, remove the HPN patch from OpenSSH.

Retire the NONE cipher option.

Remove /* $FreeBSD$ */ from files that already have __RCSID("$FreeBSD$").

ssh: canonicize the host name before looking it up in the host file

Re-apply r99054 by des in 2002. This was accidentally dropped
by the update to OpenSSH 6.5p1 (r261320).

This change is actually taken from r387082 of
ports/security/openssh-portable/files/patch-ssh.c

PR: 198043
Differential Revision: https://reviews.freebsd.org/D3103
Reviewed by: des
Approved by: kib (mentor)
MFC after: 3 days
Relnotes: yes
Sponsored by: Dell Inc.

Restore the pX part to the version number printed in debugging mode.

Upgrade to OpenSSH 6.6p1.

Upgrade to OpenSSH 6.5p1.

Upgrade to 6.3p1.

Approved by: re (gjb)

Merge updated "no such identity file" patch.

PR: bin/178060

Merge upstream patch to silence spurious "no such identity file" warnings.

Upgrade OpenSSH to 6.1p1.

OpenSSH: allow VersionAddendum to be used again

Prior to this, setting VersionAddendum will be a no-op: one will
always have BASE_VERSION + " " + VERSION_HPN for VersionAddendum
set in the config and a bare BASE_VERSION + VERSION_HPN when there
is no VersionAddendum is set.

HPN patch requires both parties to have the "hpn" inside their
advertized versions, so we add VERSION_HPN to the VERSION_BASE
if HPN is enabled and omitting it if HPN is disabled.

VersionAddendum now uses the following logics:
* unset (default value): append " " and VERSION_ADDENDUM;
* VersionAddendum is set and isn't empty: append " "
and VersionAddendum;
* VersionAddendum is set and empty: don't append anything.

Approved by: des
Reviewed by: bz
MFC after: 3 days

Polish diff against upstream.

- Revert unneeded whitespace changes.
- Revert modifications to loginrec.c, as the upstream version already
does the right thing.
- Fix indentation and whitespace of local changes.

Approved by: des
MFC after: 1 month

Upgrade to OpenSSH 5.9p1.

MFC after: 3 months

Add support for dynamically adjusted buffers to allow the full use of
the bandwidth of long fat pipes (i.e. 100Mbps+ trans-oceanic or
trans-continental links). Bandwidth-delay products up to 64MB are
supported.

Also add support (not compiled by default) for the None cypher. The
None cypher can only be enabled on non-interactive sessions (those
without a pty where -T was not used) and must be enabled in both
the client and server configuration files and on the client command
line. Additionally, the None cypher will only be activated after
authentication is complete. To enable the None cypher you must add
-DNONE_CIPHER_ENABLED to CFLAGS via the make command line or in
/etc/make.conf.

This code is a style(9) compliant version of these features extracted
from the patches published at:

http://www.psc.edu/networking/projects/hpn-ssh/

Merging this patch has been a collaboration between me and Bjoern.

Reviewed by: bz
Approved by: re (kib), des (maintainer)

Upgrade to OpenSSH 5.8p2.

Upgrade to OpenSSH 5.6p1.

Upgrade to OpenSSH 5.4p1.

MFC after: 1 month

Upgrade to OpenSSH 5.3p1.

Upgrade to OpenSSH 5.2p1.

MFC after: 3 months

Upgrade to OpenSSH 5.1p1.

I have worked hard to reduce diffs against the vendor branch. One
notable change in that respect is that we no longer prefer DSA over
RSA - the reasons for doing so went away years ago. This may cause
some surprises, as ssh will warn about unknown host keys even for
hosts whose keys haven't changed.

MFC after: 6 weeks

Properly flatten openssh/dist.

Resolve conflicts.

Vendor import of OpenSSH 4.5p1.

Merge conflicts.

MFC after: 1 week

Vendor import of OpenSSH 4.4p1.

Merge conflicts.

Vendor import of OpenSSH 4.3p1.

Resolve conflicts.

Vendor import of OpenSSH 4.2p1.

Resolve conflicts.

Vendor import of OpenSSH 4.1p1.

Vendor import of OpenSSH 4.0p1.

Resolve conflicts

Vendor import of OpenSSH 3.9p1.

Resolve conflicts.

Vendor import of OpenSSH 3.8.1p1.

Resolve conflicts.

Vendor import of OpenSSH 3.8p1.

Resolve conflicts and remove obsolete files.

Sponsored by: registrar.no

Vendor import of OpenSSH 3.7.1p2.

Resolve conflicts.

Vendor import of OpenSSH-portable 3.6.1p1.

Resolve conflicts.

Vendor import of OpenSSH-portable 3.5p1.

Canonicize the host name before looking it up in the host file.

Sponsored by: DARPA, NAI Labs

Forcibly revert to mainline.

Vendor import of OpenSSH 3.3p1.

Resolve conflicts. Known issues:

- sshd fails to set TERM correctly.
- privilege separation may break PAM and is currently turned off.
- man pages have not yet been updated

I will have these issues resolved, and privilege separation turned on by
default, in time for DP2.

Sponsored by: DARPA, NAI Labs

Vendor import of OpenSSH 3.3.

Fix conflicts.

Vendor import of OpenSSH 3.1

Make libssh.so useable (undefined reference to IPv4or6).

Reviewed by: des, markm
Approved by: markm

Modify a "You don't exist" message, pretty rude for transient YP failures.

fix renamed options in some of the code that was #ifdef AFS
also print an error if krb5 ticket passing is disabled

Submitted by: Jonathan Chen <jon@spock.org>

Fix conflicts for OpenSSH 2.9.

Say "hi" to the latest in the OpenSSH series, version 2.9!

Happy birthday to: rwatson

Backout completely canonical lookup modifications.

Update to OpenSSH 2.3.0 with FreeBSD modifications. OpenSSH 2.3.0
new features description elided in favor of checking out their
website.

Important new FreeBSD-version stuff: PAM support has been worked
in, partially from the "Unix" OpenSSH version, and a lot due to the
work of Eivind Eklend, too.

This requires at least the following in pam.conf:

sshd auth sufficient pam_skey.so
sshd auth required pam_unix.so try_first_pass
sshd session required pam_permit.so

Parts by: Eivind Eklend <eivind@FreeBSD.org>

Import of OpenSSH 2.3.0 (virgin OpenBSD source release).

Remove duplicate line

Not responded to by: kris, then green

Resolve conflicts and update for OpenSSH 2.2.0

Reviewed by: gshapiro, peter, green

Initial import of OpenSSH post-2.2.0 snapshot dated 2000-09-09

So /this/ is what has made OpenSSH's SSHv2 support never work right!
In some cases, limits did not get set to the proper class, but
instead always to "default", because not all passwd copies were
done to completion.

Bring vendor patches onto the main branch, and resolve conflicts.

Import vendor patches: the first is written by
Brian Feldman <green@FreeBSD.org>

* Remove the gratuitous dependency on OpenSSL 0.9.5a (preparation for MFC)
* Disable agent forwarding by default in the client (security risk)

Submitted by: green
Obtained from: OpenBSD

Resolve conflicts and update for FreeBSD.

Initial import of OpenSSH v2.1.

Resolve conflicts.

Virgin import of OpenSSH sources dated 2000/03/25

Turn off X11 forwarding in the client. X11 forwarding in the server by
default should probably also get turned on, now.

Requested by: kris
Obtained from: OpenBSD

1) Add kerberos5 functionality.
by Daniel Kouril <kouril@informatics.muni.cz>
2) Add full LOGIN_CAP capability
by Andrey Chernov

Add the patches fom ports (QV: ports/security/openssh/patches/patch-*)

Vendor import of OpenSSH.

ssh: Update to OpenSSH 9.6p1

From the release notes,

> This release contains a number of security fixes, some small features
> and bugfixes.

The most significant change in 9.6p1 is a set of fixes for a newly-
discovered weakness in the SSH transport protocol. The fix was already
merged into FreeBSD and released as FreeBSD-SA-23:19.openssh.

Full release notes at https://www.openssh.com/txt/release-9.6

Relnotes: Yes
Sponsored by: The FreeBSD Foundation

ssh: Update to OpenSSH 9.5p1

Excerpts from the release notes:

Potentially incompatible changes
--------------------------------

* ssh-keygen(1): generate Ed25519 keys by default.
[NOTE: This change was already merged into FreeBSD.]

* sshd(8): the Subsystem directive now accurately preserves quoting of
subsystem commands and arguments.

New features
------------

* ssh(1): add keystroke timing obfuscation to the client.

* ssh(1), sshd(8): Introduce a transport-level ping facility.

* sshd(8): allow override of Sybsystem directives in sshd Match blocks.

Full release notes at https://www.openssh.com/txt/release-9.5

Relnotes: Yes
Sponsored by: The FreeBSD Foundation

ssh: Update to OpenSSH 9.4p1

Excerpts from the release notes:

* ssh-agent(1): PKCS#11 modules must now be specified by their full
paths. Previously dlopen(3) could search for them in system
library directories.

* ssh(1): allow forwarding Unix Domain sockets via ssh -W.

* ssh(1): add support for configuration tags to ssh(1).
This adds a ssh_config(5) "Tag" directive and corresponding
"Match tag" predicate that may be used to select blocks of
configuration similar to the pf.conf(5) keywords of the same
name.

* ssh(1): add a "match localnetwork" predicate. This allows matching
on the addresses of available network interfaces and may be used to
vary the effective client configuration based on network location.

* ssh-agent(1): improve isolation between loaded PKCS#11 modules
by running separate ssh-pkcs11-helpers for each loaded provider.

* ssh-agent(1), ssh(1): improve defences against invalid PKCS#11
modules being loaded by checking that the requested module
contains the required symbol before loading it.

* ssh(1): don't incorrectly disable hostname canonicalization when
CanonicalizeHostname=yes and ProxyJump was expicitly set to
"none". bz3567

Full release notes at https://www.openssh.com/txt/release-9.4

Relnotes: Yes
Sponsored by: The FreeBSD Foundation

ssh: Update to OpenSSH 9.3p1

This release fixes a number of security bugs and has minor new
features and bug fixes. Security fixes, from the release notes
(https://www.openssh.com/txt/release-9.3):

This release contains fixes for a security problem and a memory
safety problem. The memory safety problem is not believed to be
exploitable, but we report most network-reachable memory faults as
security bugs.

* ssh-add(1): when adding smartcard keys to ssh-agent(1) with the
per-hop destination constraints (ssh-add -h ...) added in OpenSSH
8.9, a logic error prevented the constraints from being
communicated to the agent. This resulted in the keys being added
without constraints. The common cases of non-smartcard keys and
keys without destination constraints are unaffected. This problem
was reported by Luci Stanescu.

* ssh(1): Portable OpenSSH provides an implementation of the
getrrsetbyname(3) function if the standard library does not
provide it, for use by the VerifyHostKeyDNS feature. A
specifically crafted DNS response could cause this function to
perform an out-of-bounds read of adjacent stack data, but this
condition does not appear to be exploitable beyond denial-of-
service to the ssh(1) client.

The getrrsetbyname(3) replacement is only included if the system's
standard library lacks this function and portable OpenSSH was not
compiled with the ldns library (--with-ldns). getrrsetbyname(3) is
only invoked if using VerifyHostKeyDNS to fetch SSHFP records. This
problem was found by the Coverity static analyzer.

Sponsored by: The FreeBSD Foundation

ssh: fix leak and apply style(9) to hostname canonicalization

Fixes: bf2e2524a2ce ("ssh: canonicize the host name before...")
Fixes: 3e74849a1ee2 ("ssh: canonicize the host name before...")
Reviewed by: rew
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D38441

ssh: update to OpenSSH 9.2p1

Release notes are available at https://www.openssh.com/txt/release-9.2

OpenSSH 9.2 contains fixes for two security problems and a memory safety
problem. The memory safety problem is not believed to be exploitable.
These fixes have already been committed to OpenSSH 9.1 in FreeBSD.

Some other notable items from the release notes:

* ssh(1): add a new EnableEscapeCommandline ssh_config(5) option that
controls whether the client-side ~C escape sequence that provides a
command-line is available. Among other things, the ~C command-line
could be used to add additional port-forwards at runtime.

* sshd(8): add support for channel inactivity timeouts via a new
sshd_config(5) ChannelTimeout directive. This allows channels that
have not seen traffic in a configurable interval to be
automatically closed. Different timeouts may be applied to session,
X11, agent and TCP forwarding channels.

* sshd(8): add a sshd_config UnusedConnectionTimeout option to
terminate client connections that have no open channels for a
length of time. This complements the ChannelTimeout option above.

* sshd(8): add a -V (version) option to sshd like the ssh client has.

* scp(1), sftp(1): add a -X option to both scp(1) and sftp(1) to
allow control over some SFTP protocol parameters: the copy buffer
length and the number of in-flight requests, both of which are used
during upload/download. Previously these could be controlled in
sftp(1) only. This makes them available in both SFTP protocol
clients using the same option character sequence.

* ssh-keyscan(1): allow scanning of complete CIDR address ranges,
e.g. "ssh-keyscan 192.168.0.0/24". If a CIDR range is passed, then
it will be expanded to all possible addresses in the range
including the all-0s and all-1s addresses. bz#976

* ssh(1): support dynamic remote port forwarding in escape
command-line's -R processing. bz#3499

MFC after: 1 week
Sponsored by: The FreeBSD Foundation

ssh: Be more paranoid with host/domain names coming from the

never write a name with bad characters to a known_hosts file.

replace recently-added valid_domain() check for hostnames going to
known_hosts with a more relaxed check for bad characters.

Obtained from: OpenSSH-portable commit 445363433ba2
Obtained from: OpenSSH-portable commit 3cae9f92a318
Sponsored by: The FreeBSD Foundation

ssh: update to OpenSSH 9.1p1

Release notes are available at https://www.openssh.com/txt/release-9.1

9.1 contains fixes for three minor memory safety problems; these have
lready been merged to the copy of OpenSSH 9.0 that is in the FreeBSD base
system.

Some highlights copied from the release notes:

Potentially-incompatible changes
--------------------------------

* ssh(1), sshd(8): SetEnv directives in ssh_config and sshd_config
are now first-match-wins to match other directives. Previously
if an environment variable was multiply specified the last set
value would have been used. bz3438

* ssh-keygen(8): ssh-keygen -A (generate all default host key types)
will no longer generate DSA keys, as these are insecure and have
not been used by default for some years.

New features
------------

* ssh(1), sshd(8): add a RequiredRSASize directive to set a minimum
RSA key length. Keys below this length will be ignored for user
authentication and for host authentication in sshd(8).

* sftp-server(8): add a "users-groups-by-id@openssh.com" extension
request that allows the client to obtain user/group names that
correspond to a set of uids/gids.

* sftp(1): use "users-groups-by-id@openssh.com" sftp-server
extension (when available) to fill in user/group names for
directory listings.

* sftp-server(8): support the "home-directory" extension request
defined in draft-ietf-secsh-filexfer-extensions-00. This overlaps
a bit with the existing "expand-path@openssh.com", but some other
clients support it.

* ssh-keygen(1), sshd(8): allow certificate validity intervals,
sshsig verification times and authorized_keys expiry-time options
to accept dates in the UTC time zone in addition to the default
of interpreting them in the system time zone. YYYYMMDD and
YYMMDDHHMM[SS] dates/times will be interpreted as UTC if suffixed
with a 'Z' character.

Also allow certificate validity intervals to be specified in raw
seconds-since-epoch as hex value, e.g. -V 0x1234:0x4567890. This
is intended for use by regress tests and other tools that call
ssh-keygen as part of a CA workflow. bz3468

* sftp(1): allow arguments to the sftp -D option, e.g. sftp -D
"/usr/libexec/sftp-server -el debug3"

* ssh-keygen(1): allow the existing -U (use agent) flag to work
with "-Y sign" operations, where it will be interpreted to require
that the private keys is hosted in an agent; bz3429

MFC after: 2 weeks
Relnotes: Yes
Sponsored by: The FreeBSD Foundation

ssh: retire client VersionAddendum

FreeBSD introduced VersionAddendum for the server as a local change in
2001 in commit 933ca70f8f88 and later extended it to the client in
commit 9e2cbe04ff4f.

In 2012 upstream added support for server VersionAddendum, in commit
23528816dc10. They do not support it for the client.

The argument for supporting this in the client is not nearly as strong
as for the server, so retire this option to reduce the scope of our
local patch set. This also avoids some cases of conflicts in ssh_config
during update, as a user's configuration would typically follow the
commented-out default VersionAddendum value.

Reviewed by: gordon, glebius
Relnotes: yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D32930

ssh: use upstream SSH_OPENSSL_VERSION macro

With the upgrade to OpenSSH 6.7p1 in commit a0ee8cc636cd we replaced
WITH_OPENSSL ifdefs with an OPENSSL_VERSION macro, later changing it
to OPENSSL_VERSION_STRING.

A few years later OpenSSH made an equivalent change (with a different
macro name), in commit 4d94b031ff88. Switch to the macro name they
chose.

MFC after: 1 week
Sponsored by: The FreeBSD Foundation

ssh: drop $FreeBSD$ from crypto/openssh

After we moved to git $FreeBSD$ is no longer expanded and serves no
purpose. Remove them from OpenSSH to reduce diffs against upstream.

Sponsored by: The FreeBSD Foundation

ssh: apply style(9) to version_addendum

Reported by: allanjude (in review D29953)
Fixes: 462c32cb8d7a ("Upgrade OpenSSH to 6.1p1.")
MFC after: 1 week
Sponsored by: The FreeBSD Foundation

ssh: update to OpenSSH v9.0p1

Release notes are available at https://www.openssh.com/txt/release-9.0

Some highlights:

* ssh(1), sshd(8): use the hybrid Streamlined NTRU Prime + x25519 key
exchange method by default ("sntrup761x25519-sha512@openssh.com").
The NTRU algorithm is believed to resist attacks enabled by future
quantum computers and is paired with the X25519 ECDH key exchange
(the previous default) as a backstop against any weaknesses in
NTRU Prime that may be discovered in the future. The combination
ensures that the hybrid exchange offers at least as good security
as the status quo.

* sftp-server(8): support the "copy-data" extension to allow server-
side copying of files/data, following the design in
draft-ietf-secsh-filexfer-extensions-00. bz2948

* sftp(1): add a "cp" command to allow the sftp client to perform
server-side file copies.

This commit excludes the scp(1) change to use the SFTP protocol by
default; that change will immediately follow.

MFC after: 1 month
Relnotes: Yes
Sponsored by: The FreeBSD Foundation

ssh: update to OpenSSH v8.9p1

Release notes are available at https://www.openssh.com/txt/release-8.9

Some highlights:

* ssh(1), sshd(8), ssh-add(1), ssh-agent(1): add a system for
restricting forwarding and use of keys added to ssh-agent(1)

* ssh(1), sshd(8): add the sntrup761x25519-sha512@openssh.com hybrid
ECDH/x25519 + Streamlined NTRU Prime post-quantum KEX to the
default KEXAlgorithms list (after the ECDH methods but before the
prime-group DH ones). The next release of OpenSSH is likely to
make this key exchange the default method.

* sshd(8), portable OpenSSH only: this release removes in-built
support for MD5-hashed passwords. If you require these on your
system then we recommend linking against libxcrypt or similar.

Future deprecation notice
=========================

A near-future release of OpenSSH will switch scp(1) from using the
legacy scp/rcp protocol to using SFTP by default.

Legacy scp/rcp performs wildcard expansion of remote filenames (e.g.
"scp host:* .") through the remote shell. This has the side effect of
requiring double quoting of shell meta-characters in file names
included on scp(1) command-lines, otherwise they could be interpreted
as shell commands on the remote side.

MFC after: 1 month
Relnotes: Yes
Sponsored by: The FreeBSD Foundation

ssh: update to OpenSSH v8.8p1

OpenSSH v8.8p1 was motivated primarily by a security update and
deprecation of RSA/SHA1 signatures. It also has a few minor bug fixes.

The security update was already applied to FreeBSD as an independent
change, and the RSA/SHA1 deprecation is excluded from this commit but
will immediately follow.

MFC after: 1 month
Relnotes: Yes
Sponsored by: The FreeBSD Foundation

openssh: update to OpenSSH v8.7p1

Some notable changes, from upstream's release notes:

- sshd(8): Remove support for obsolete "host/port" syntax.
- ssh(1): When prompting whether to record a new host key, accept the key
fingerprint as a synonym for "yes".
- ssh-keygen(1): when acting as a CA and signing certificates with an RSA
key, default to using the rsa-sha2-512 signature algorithm.
- ssh(1), sshd(8), ssh-keygen(1): this release removes the "ssh-rsa"
(RSA/SHA1) algorithm from those accepted for certificate signatures.
- ssh-sk-helper(8): this is a new binary. It is used by the FIDO/U2F
support to provide address-space isolation for token middleware
libraries (including the internal one).
- ssh(1): this release enables UpdateHostkeys by default subject to some
conservative preconditions.
- scp(1): this release changes the behaviour of remote to remote copies
(e.g. "scp host-a:/path host-b:") to transfer through the local host
by default.
- scp(1): experimental support for transfers using the SFTP protocol as
a replacement for the venerable SCP/RCP protocol that it has
traditionally used.

Additional integration work is needed to support FIDO/U2F in the base
system.

Deprecation Notice
------------------

OpenSSH will disable the ssh-rsa signature scheme by default in the
next release.

Reviewed by: imp
MFC after: 1 month
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D29985

Upgrade to OpenSSH 7.9p1.

MFC after: 2 months
Sponsored by: The FreeBSD Foundation

openssh: rename local macro to avoid OpenSSL 1.1.1 conflict

Local changes introduced an OPENSSH_VERSION macro, but this conflicts
with a macro of the same name introduced with OepnsSL 1.1.1

Reviewed by: des
Approved by: re (gjb)
MFC after: 1 week
Sponsored by: The FreeBSD Foundation

Upgrade to OpenSSH 7.8p1.

Approved by: re (kib@)

Upgrade to OpenSSH 7.7p1.

Upgrade to OpenSSH 7.6p1. This will be followed shortly by 7.7p1.

This completely removes client-side support for the SSH 1 protocol,
which was already disabled in 12 but is still enabled in 11. For that
reason, we will not be able to merge 7.6p1 or newer back to 11.

Upgrade to OpenSSH 7.5p1.

Upgrade to OpenSSH 7.4p1.

Upgrade to OpenSSH 7.3p1.

Upgrade to OpenSSH 7.2p2.

Explain why we don't include VersionAddendum in the debug mode banner.

Upgrade to OpenSSH 7.0p1.

Upgrade to OpenSSH 6.9p1.

Upgrade to OpenSSH 6.8p1.

Upgrade to OpenSSH 6.7p1, retaining libwrap support (which has been removed
upstream) and a number of security fixes which we had already backported.

MFC after: 1 week

As previously threatened, remove the HPN patch from OpenSSH.

Retire the NONE cipher option.

Remove /* $FreeBSD$ */ from files that already have __RCSID("$FreeBSD$").

ssh: canonicize the host name before looking it up in the host file

Re-apply r99054 by des in 2002. This was accidentally dropped
by the update to OpenSSH 6.5p1 (r261320).

This change is actually taken from r387082 of
ports/security/openssh-portable/files/patch-ssh.c

PR: 198043
Differential Revision: https://reviews.freebsd.org/D3103
Reviewed by: des
Approved by: kib (mentor)
MFC after: 3 days
Relnotes: yes
Sponsored by: Dell Inc.

Restore the pX part to the version number printed in debugging mode.

Upgrade to OpenSSH 6.6p1.

Upgrade to OpenSSH 6.5p1.

Upgrade to 6.3p1.

Approved by: re (gjb)

Merge updated "no such identity file" patch.

PR: bin/178060

Merge upstream patch to silence spurious "no such identity file" warnings.

Upgrade OpenSSH to 6.1p1.

OpenSSH: allow VersionAddendum to be used again

Prior to this, setting VersionAddendum will be a no-op: one will
always have BASE_VERSION + " " + VERSION_HPN for VersionAddendum
set in the config and a bare BASE_VERSION + VERSION_HPN when there
is no VersionAddendum is set.

HPN patch requires both parties to have the "hpn" inside their
advertized versions, so we add VERSION_HPN to the VERSION_BASE
if HPN is enabled and omitting it if HPN is disabled.

VersionAddendum now uses the following logics:
* unset (default value): append " " and VERSION_ADDENDUM;
* VersionAddendum is set and isn't empty: append " "
and VersionAddendum;
* VersionAddendum is set and empty: don't append anything.

Approved by: des
Reviewed by: bz
MFC after: 3 days

Polish diff against upstream.

- Revert unneeded whitespace changes.
- Revert modifications to loginrec.c, as the upstream version already
does the right thing.
- Fix indentation and whitespace of local changes.

Approved by: des
MFC after: 1 month

Upgrade to OpenSSH 5.9p1.

MFC after: 3 months

Add support for dynamically adjusted buffers to allow the full use of
the bandwidth of long fat pipes (i.e. 100Mbps+ trans-oceanic or
trans-continental links). Bandwidth-delay products up to 64MB are
supported.

Also add support (not compiled by default) for the None cypher. The
None cypher can only be enabled on non-interactive sessions (those
without a pty where -T was not used) and must be enabled in both
the client and server configuration files and on the client command
line. Additionally, the None cypher will only be activated after
authentication is complete. To enable the None cypher you must add
-DNONE_CIPHER_ENABLED to CFLAGS via the make command line or in
/etc/make.conf.

This code is a style(9) compliant version of these features extracted
from the patches published at:

http://www.psc.edu/networking/projects/hpn-ssh/

Merging this patch has been a collaboration between me and Bjoern.

Reviewed by: bz
Approved by: re (kib), des (maintainer)

Upgrade to OpenSSH 5.8p2.

Upgrade to OpenSSH 5.6p1.

Upgrade to OpenSSH 5.4p1.

MFC after: 1 month

Upgrade to OpenSSH 5.3p1.

Upgrade to OpenSSH 5.2p1.

MFC after: 3 months

Upgrade to OpenSSH 5.1p1.

I have worked hard to reduce diffs against the vendor branch. One
notable change in that respect is that we no longer prefer DSA over
RSA - the reasons for doing so went away years ago. This may cause
some surprises, as ssh will warn about unknown host keys even for
hosts whose keys haven't changed.

MFC after: 6 weeks

Properly flatten openssh/dist.

Resolve conflicts.

Vendor import of OpenSSH 4.5p1.

Merge conflicts.

MFC after: 1 week

Vendor import of OpenSSH 4.4p1.

Merge conflicts.

Vendor import of OpenSSH 4.3p1.

Resolve conflicts.

Vendor import of OpenSSH 4.2p1.

Resolve conflicts.

Vendor import of OpenSSH 4.1p1.

Vendor import of OpenSSH 4.0p1.

Resolve conflicts

Vendor import of OpenSSH 3.9p1.

Resolve conflicts.

Vendor import of OpenSSH 3.8.1p1.

Resolve conflicts.

Vendor import of OpenSSH 3.8p1.

Resolve conflicts and remove obsolete files.

Sponsored by: registrar.no

Vendor import of OpenSSH 3.7.1p2.

Resolve conflicts.

Vendor import of OpenSSH-portable 3.6.1p1.

Resolve conflicts.

Vendor import of OpenSSH-portable 3.5p1.

Canonicize the host name before looking it up in the host file.

Sponsored by: DARPA, NAI Labs

Forcibly revert to mainline.

Vendor import of OpenSSH 3.3p1.

Resolve conflicts. Known issues:

- sshd fails to set TERM correctly.
- privilege separation may break PAM and is currently turned off.
- man pages have not yet been updated

I will have these issues resolved, and privilege separation turned on by
default, in time for DP2.

Sponsored by: DARPA, NAI Labs

Vendor import of OpenSSH 3.3.

Fix conflicts.

Vendor import of OpenSSH 3.1

Make libssh.so useable (undefined reference to IPv4or6).

Reviewed by: des, markm
Approved by: markm

Modify a "You don't exist" message, pretty rude for transient YP failures.

fix renamed options in some of the code that was #ifdef AFS
also print an error if krb5 ticket passing is disabled

Submitted by: Jonathan Chen <jon@spock.org>

Fix conflicts for OpenSSH 2.9.

Say "hi" to the latest in the OpenSSH series, version 2.9!

Happy birthday to: rwatson

Backout completely canonical lookup modifications.

Update to OpenSSH 2.3.0 with FreeBSD modifications. OpenSSH 2.3.0
new features description elided in favor of checking out their
website.

Important new FreeBSD-version stuff: PAM support has been worked
in, partially from the "Unix" OpenSSH version, and a lot due to the
work of Eivind Eklend, too.

This requires at least the following in pam.conf:

sshd auth sufficient pam_skey.so
sshd auth required pam_unix.so try_first_pass
sshd session required pam_permit.so

Parts by: Eivind Eklend <eivind@FreeBSD.org>

Import of OpenSSH 2.3.0 (virgin OpenBSD source release).

Remove duplicate line

Not responded to by: kris, then green

Resolve conflicts and update for OpenSSH 2.2.0

Reviewed by: gshapiro, peter, green

Initial import of OpenSSH post-2.2.0 snapshot dated 2000-09-09

So /this/ is what has made OpenSSH's SSHv2 support never work right!
In some cases, limits did not get set to the proper class, but
instead always to "default", because not all passwd copies were
done to completion.

Bring vendor patches onto the main branch, and resolve conflicts.

Import vendor patches: the first is written by
Brian Feldman <green@FreeBSD.org>

* Remove the gratuitous dependency on OpenSSL 0.9.5a (preparation for MFC)
* Disable agent forwarding by default in the client (security risk)

Submitted by: green
Obtained from: OpenBSD

Resolve conflicts and update for FreeBSD.

Initial import of OpenSSH v2.1.

Resolve conflicts.

Virgin import of OpenSSH sources dated 2000/03/25

Turn off X11 forwarding in the client. X11 forwarding in the server by
default should probably also get turned on, now.

Requested by: kris
Obtained from: OpenBSD

1) Add kerberos5 functionality.
by Daniel Kouril <kouril@informatics.muni.cz>
2) Add full LOGIN_CAP capability
by Andrey Chernov

Add the patches fom ports (QV: ports/security/openssh/patches/patch-*)

Vendor import of OpenSSH.

ssh: Update to OpenSSH 9.5p1

Excerpts from the release notes:

Potentially incompatible changes
--------------------------------

* ssh-keygen(1): generate Ed25519 keys by default.
[NOTE: This change was already merged into FreeBSD.]

* sshd(8): the Subsystem directive now accurately preserves quoting of
subsystem commands and arguments.

New features
------------

* ssh(1): add keystroke timing obfuscation to the client.

* ssh(1), sshd(8): Introduce a transport-level ping facility.

* sshd(8): allow override of Sybsystem directives in sshd Match blocks.

Full release notes at https://www.openssh.com/txt/release-9.5

Relnotes: Yes
Sponsored by: The FreeBSD Foundation

ssh: Update to OpenSSH 9.4p1

Excerpts from the release notes:

* ssh-agent(1): PKCS#11 modules must now be specified by their full
paths. Previously dlopen(3) could search for them in system
library directories.

* ssh(1): allow forwarding Unix Domain sockets via ssh -W.

* ssh(1): add support for configuration tags to ssh(1).
This adds a ssh_config(5) "Tag" directive and corresponding
"Match tag" predicate that may be used to select blocks of
configuration similar to the pf.conf(5) keywords of the same
name.

* ssh(1): add a "match localnetwork" predicate. This allows matching
on the addresses of available network interfaces and may be used to
vary the effective client configuration based on network location.

* ssh-agent(1): improve isolation between loaded PKCS#11 modules
by running separate ssh-pkcs11-helpers for each loaded provider.

* ssh-agent(1), ssh(1): improve defences against invalid PKCS#11
modules being loaded by checking that the requested module
contains the required symbol before loading it.

* ssh(1): don't incorrectly disable hostname canonicalization when
CanonicalizeHostname=yes and ProxyJump was expicitly set to
"none". bz3567

Full release notes at https://www.openssh.com/txt/release-9.4

Relnotes: Yes
Sponsored by: The FreeBSD Foundation

ssh: Update to OpenSSH 9.3p1

This release fixes a number of security bugs and has minor new
features and bug fixes. Security fixes, from the release notes
(https://www.openssh.com/txt/release-9.3):

This release contains fixes for a security problem and a memory
safety problem. The memory safety problem is not believed to be
exploitable, but we report most network-reachable memory faults as
security bugs.

* ssh-add(1): when adding smartcard keys to ssh-agent(1) with the
per-hop destination constraints (ssh-add -h ...) added in OpenSSH
8.9, a logic error prevented the constraints from being
communicated to the agent. This resulted in the keys being added
without constraints. The common cases of non-smartcard keys and
keys without destination constraints are unaffected. This problem
was reported by Luci Stanescu.

* ssh(1): Portable OpenSSH provides an implementation of the
getrrsetbyname(3) function if the standard library does not
provide it, for use by the VerifyHostKeyDNS feature. A
specifically crafted DNS response could cause this function to
perform an out-of-bounds read of adjacent stack data, but this
condition does not appear to be exploitable beyond denial-of-
service to the ssh(1) client.

The getrrsetbyname(3) replacement is only included if the system's
standard library lacks this function and portable OpenSSH was not
compiled with the ldns library (--with-ldns). getrrsetbyname(3) is
only invoked if using VerifyHostKeyDNS to fetch SSHFP records. This
problem was found by the Coverity static analyzer.

Sponsored by: The FreeBSD Foundation

ssh: fix leak and apply style(9) to hostname canonicalization

Fixes: bf2e2524a2ce ("ssh: canonicize the host name before...")
Fixes: 3e74849a1ee2 ("ssh: canonicize the host name before...")
Reviewed by: rew
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D38441

ssh: update to OpenSSH 9.2p1

Release notes are available at https://www.openssh.com/txt/release-9.2

OpenSSH 9.2 contains fixes for two security problems and a memory safety
problem. The memory safety problem is not believed to be exploitable.
These fixes have already been committed to OpenSSH 9.1 in FreeBSD.

Some other notable items from the release notes:

* ssh(1): add a new EnableEscapeCommandline ssh_config(5) option that
controls whether the client-side ~C escape sequence that provides a
command-line is available. Among other things, the ~C command-line
could be used to add additional port-forwards at runtime.

* sshd(8): add support for channel inactivity timeouts via a new
sshd_config(5) ChannelTimeout directive. This allows channels that
have not seen traffic in a configurable interval to be
automatically closed. Different timeouts may be applied to session,
X11, agent and TCP forwarding channels.

* sshd(8): add a sshd_config UnusedConnectionTimeout option to
terminate client connections that have no open channels for a
length of time. This complements the ChannelTimeout option above.

* sshd(8): add a -V (version) option to sshd like the ssh client has.

* scp(1), sftp(1): add a -X option to both scp(1) and sftp(1) to
allow control over some SFTP protocol parameters: the copy buffer
length and the number of in-flight requests, both of which are used
during upload/download. Previously these could be controlled in
sftp(1) only. This makes them available in both SFTP protocol
clients using the same option character sequence.

* ssh-keyscan(1): allow scanning of complete CIDR address ranges,
e.g. "ssh-keyscan 192.168.0.0/24". If a CIDR range is passed, then
it will be expanded to all possible addresses in the range
including the all-0s and all-1s addresses. bz#976

* ssh(1): support dynamic remote port forwarding in escape
command-line's -R processing. bz#3499

MFC after: 1 week
Sponsored by: The FreeBSD Foundation

ssh: Be more paranoid with host/domain names coming from the

never write a name with bad characters to a known_hosts file.

replace recently-added valid_domain() check for hostnames going to
known_hosts with a more relaxed check for bad characters.

Obtained from: OpenSSH-portable commit 445363433ba2
Obtained from: OpenSSH-portable commit 3cae9f92a318
Sponsored by: The FreeBSD Foundation

ssh: update to OpenSSH 9.1p1

Release notes are available at https://www.openssh.com/txt/release-9.1

9.1 contains fixes for three minor memory safety problems; these have
lready been merged to the copy of OpenSSH 9.0 that is in the FreeBSD base
system.

Some highlights copied from the release notes:

Potentially-incompatible changes
--------------------------------

* ssh(1), sshd(8): SetEnv directives in ssh_config and sshd_config
are now first-match-wins to match other directives. Previously
if an environment variable was multiply specified the last set
value would have been used. bz3438

* ssh-keygen(8): ssh-keygen -A (generate all default host key types)
will no longer generate DSA keys, as these are insecure and have
not been used by default for some years.

New features
------------

* ssh(1), sshd(8): add a RequiredRSASize directive to set a minimum
RSA key length. Keys below this length will be ignored for user
authentication and for host authentication in sshd(8).

* sftp-server(8): add a "users-groups-by-id@openssh.com" extension
request that allows the client to obtain user/group names that
correspond to a set of uids/gids.

* sftp(1): use "users-groups-by-id@openssh.com" sftp-server
extension (when available) to fill in user/group names for
directory listings.

* sftp-server(8): support the "home-directory" extension request
defined in draft-ietf-secsh-filexfer-extensions-00. This overlaps
a bit with the existing "expand-path@openssh.com", but some other
clients support it.

* ssh-keygen(1), sshd(8): allow certificate validity intervals,
sshsig verification times and authorized_keys expiry-time options
to accept dates in the UTC time zone in addition to the default
of interpreting them in the system time zone. YYYYMMDD and
YYMMDDHHMM[SS] dates/times will be interpreted as UTC if suffixed
with a 'Z' character.

Also allow certificate validity intervals to be specified in raw
seconds-since-epoch as hex value, e.g. -V 0x1234:0x4567890. This
is intended for use by regress tests and other tools that call
ssh-keygen as part of a CA workflow. bz3468

* sftp(1): allow arguments to the sftp -D option, e.g. sftp -D
"/usr/libexec/sftp-server -el debug3"

* ssh-keygen(1): allow the existing -U (use agent) flag to work
with "-Y sign" operations, where it will be interpreted to require
that the private keys is hosted in an agent; bz3429

MFC after: 2 weeks
Relnotes: Yes
Sponsored by: The FreeBSD Foundation

ssh: retire client VersionAddendum

FreeBSD introduced VersionAddendum for the server as a local change in
2001 in commit 933ca70f8f88 and later extended it to the client in
commit 9e2cbe04ff4f.

In 2012 upstream added support for server VersionAddendum, in commit
23528816dc10. They do not support it for the client.

The argument for supporting this in the client is not nearly as strong
as for the server, so retire this option to reduce the scope of our
local patch set. This also avoids some cases of conflicts in ssh_config
during update, as a user's configuration would typically follow the
commented-out default VersionAddendum value.

Reviewed by: gordon, glebius
Relnotes: yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D32930

ssh: use upstream SSH_OPENSSL_VERSION macro

With the upgrade to OpenSSH 6.7p1 in commit a0ee8cc636cd we replaced
WITH_OPENSSL ifdefs with an OPENSSL_VERSION macro, later changing it
to OPENSSL_VERSION_STRING.

A few years later OpenSSH made an equivalent change (with a different
macro name), in commit 4d94b031ff88. Switch to the macro name they
chose.

MFC after: 1 week
Sponsored by: The FreeBSD Foundation

ssh: drop $FreeBSD$ from crypto/openssh

After we moved to git $FreeBSD$ is no longer expanded and serves no
purpose. Remove them from OpenSSH to reduce diffs against upstream.

Sponsored by: The FreeBSD Foundation

ssh: apply style(9) to version_addendum

Reported by: allanjude (in review D29953)
Fixes: 462c32cb8d7a ("Upgrade OpenSSH to 6.1p1.")
MFC after: 1 week
Sponsored by: The FreeBSD Foundation

ssh: update to OpenSSH v9.0p1

Release notes are available at https://www.openssh.com/txt/release-9.0

Some highlights:

* ssh(1), sshd(8): use the hybrid Streamlined NTRU Prime + x25519 key
exchange method by default ("sntrup761x25519-sha512@openssh.com").
The NTRU algorithm is believed to resist attacks enabled by future
quantum computers and is paired with the X25519 ECDH key exchange
(the previous default) as a backstop against any weaknesses in
NTRU Prime that may be discovered in the future. The combination
ensures that the hybrid exchange offers at least as good security
as the status quo.

* sftp-server(8): support the "copy-data" extension to allow server-
side copying of files/data, following the design in
draft-ietf-secsh-filexfer-extensions-00. bz2948

* sftp(1): add a "cp" command to allow the sftp client to perform
server-side file copies.

This commit excludes the scp(1) change to use the SFTP protocol by
default; that change will immediately follow.

MFC after: 1 month
Relnotes: Yes
Sponsored by: The FreeBSD Foundation

ssh: update to OpenSSH v8.9p1

Release notes are available at https://www.openssh.com/txt/release-8.9

Some highlights:

* ssh(1), sshd(8), ssh-add(1), ssh-agent(1): add a system for
restricting forwarding and use of keys added to ssh-agent(1)

* ssh(1), sshd(8): add the sntrup761x25519-sha512@openssh.com hybrid
ECDH/x25519 + Streamlined NTRU Prime post-quantum KEX to the
default KEXAlgorithms list (after the ECDH methods but before the
prime-group DH ones). The next release of OpenSSH is likely to
make this key exchange the default method.

* sshd(8), portable OpenSSH only: this release removes in-built
support for MD5-hashed passwords. If you require these on your
system then we recommend linking against libxcrypt or similar.

Future deprecation notice
=========================

A near-future release of OpenSSH will switch scp(1) from using the
legacy scp/rcp protocol to using SFTP by default.

Legacy scp/rcp performs wildcard expansion of remote filenames (e.g.
"scp host:* .") through the remote shell. This has the side effect of
requiring double quoting of shell meta-characters in file names
included on scp(1) command-lines, otherwise they could be interpreted
as shell commands on the remote side.

MFC after: 1 month
Relnotes: Yes
Sponsored by: The FreeBSD Foundation

ssh: update to OpenSSH v8.8p1

OpenSSH v8.8p1 was motivated primarily by a security update and
deprecation of RSA/SHA1 signatures. It also has a few minor bug fixes.

The security update was already applied to FreeBSD as an independent
change, and the RSA/SHA1 deprecation is excluded from this commit but
will immediately follow.

MFC after: 1 month
Relnotes: Yes
Sponsored by: The FreeBSD Foundation

openssh: update to OpenSSH v8.7p1

Some notable changes, from upstream's release notes:

- sshd(8): Remove support for obsolete "host/port" syntax.
- ssh(1): When prompting whether to record a new host key, accept the key
fingerprint as a synonym for "yes".
- ssh-keygen(1): when acting as a CA and signing certificates with an RSA
key, default to using the rsa-sha2-512 signature algorithm.
- ssh(1), sshd(8), ssh-keygen(1): this release removes the "ssh-rsa"
(RSA/SHA1) algorithm from those accepted for certificate signatures.
- ssh-sk-helper(8): this is a new binary. It is used by the FIDO/U2F
support to provide address-space isolation for token middleware
libraries (including the internal one).
- ssh(1): this release enables UpdateHostkeys by default subject to some
conservative preconditions.
- scp(1): this release changes the behaviour of remote to remote copies
(e.g. "scp host-a:/path host-b:") to transfer through the local host
by default.
- scp(1): experimental support for transfers using the SFTP protocol as
a replacement for the venerable SCP/RCP protocol that it has
traditionally used.

Additional integration work is needed to support FIDO/U2F in the base
system.

Deprecation Notice
------------------

OpenSSH will disable the ssh-rsa signature scheme by default in the
next release.

Reviewed by: imp
MFC after: 1 month
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D29985

Upgrade to OpenSSH 7.9p1.

MFC after: 2 months
Sponsored by: The FreeBSD Foundation

openssh: rename local macro to avoid OpenSSL 1.1.1 conflict

Local changes introduced an OPENSSH_VERSION macro, but this conflicts
with a macro of the same name introduced with OepnsSL 1.1.1

Reviewed by: des
Approved by: re (gjb)
MFC after: 1 week
Sponsored by: The FreeBSD Foundation

Upgrade to OpenSSH 7.8p1.

Approved by: re (kib@)

Upgrade to OpenSSH 7.7p1.

Upgrade to OpenSSH 7.6p1. This will be followed shortly by 7.7p1.

This completely removes client-side support for the SSH 1 protocol,
which was already disabled in 12 but is still enabled in 11. For that
reason, we will not be able to merge 7.6p1 or newer back to 11.

Upgrade to OpenSSH 7.5p1.

Upgrade to OpenSSH 7.4p1.

Upgrade to OpenSSH 7.3p1.

Upgrade to OpenSSH 7.2p2.

Explain why we don't include VersionAddendum in the debug mode banner.

Upgrade to OpenSSH 7.0p1.

Upgrade to OpenSSH 6.9p1.

Upgrade to OpenSSH 6.8p1.

Upgrade to OpenSSH 6.7p1, retaining libwrap support (which has been removed
upstream) and a number of security fixes which we had already backported.

MFC after: 1 week

As previously threatened, remove the HPN patch from OpenSSH.

Retire the NONE cipher option.

Remove /* $FreeBSD$ */ from files that already have __RCSID("$FreeBSD$").

ssh: canonicize the host name before looking it up in the host file

Re-apply r99054 by des in 2002. This was accidentally dropped
by the update to OpenSSH 6.5p1 (r261320).

This change is actually taken from r387082 of
ports/security/openssh-portable/files/patch-ssh.c

PR: 198043
Differential Revision: https://reviews.freebsd.org/D3103
Reviewed by: des
Approved by: kib (mentor)
MFC after: 3 days
Relnotes: yes
Sponsored by: Dell Inc.

Restore the pX part to the version number printed in debugging mode.

Upgrade to OpenSSH 6.6p1.

Upgrade to OpenSSH 6.5p1.

Upgrade to 6.3p1.

Approved by: re (gjb)

Merge updated "no such identity file" patch.

PR: bin/178060

Merge upstream patch to silence spurious "no such identity file" warnings.

Upgrade OpenSSH to 6.1p1.

OpenSSH: allow VersionAddendum to be used again

Prior to this, setting VersionAddendum will be a no-op: one will
always have BASE_VERSION + " " + VERSION_HPN for VersionAddendum
set in the config and a bare BASE_VERSION + VERSION_HPN when there
is no VersionAddendum is set.

HPN patch requires both parties to have the "hpn" inside their
advertized versions, so we add VERSION_HPN to the VERSION_BASE
if HPN is enabled and omitting it if HPN is disabled.

VersionAddendum now uses the following logics:
* unset (default value): append " " and VERSION_ADDENDUM;
* VersionAddendum is set and isn't empty: append " "
and VersionAddendum;
* VersionAddendum is set and empty: don't append anything.

Approved by: des
Reviewed by: bz
MFC after: 3 days

Polish diff against upstream.

- Revert unneeded whitespace changes.
- Revert modifications to loginrec.c, as the upstream version already
does the right thing.
- Fix indentation and whitespace of local changes.

Approved by: des
MFC after: 1 month

Upgrade to OpenSSH 5.9p1.

MFC after: 3 months

Add support for dynamically adjusted buffers to allow the full use of
the bandwidth of long fat pipes (i.e. 100Mbps+ trans-oceanic or
trans-continental links). Bandwidth-delay products up to 64MB are
supported.

Also add support (not compiled by default) for the None cypher. The
None cypher can only be enabled on non-interactive sessions (those
without a pty where -T was not used) and must be enabled in both
the client and server configuration files and on the client command
line. Additionally, the None cypher will only be activated after
authentication is complete. To enable the None cypher you must add
-DNONE_CIPHER_ENABLED to CFLAGS via the make command line or in
/etc/make.conf.

This code is a style(9) compliant version of these features extracted
from the patches published at:

http://www.psc.edu/networking/projects/hpn-ssh/

Merging this patch has been a collaboration between me and Bjoern.

Reviewed by: bz
Approved by: re (kib), des (maintainer)

Upgrade to OpenSSH 5.8p2.

Upgrade to OpenSSH 5.6p1.

Upgrade to OpenSSH 5.4p1.

MFC after: 1 month

Upgrade to OpenSSH 5.3p1.

Upgrade to OpenSSH 5.2p1.

MFC after: 3 months

Upgrade to OpenSSH 5.1p1.

I have worked hard to reduce diffs against the vendor branch. One
notable change in that respect is that we no longer prefer DSA over
RSA - the reasons for doing so went away years ago. This may cause
some surprises, as ssh will warn about unknown host keys even for
hosts whose keys haven't changed.

MFC after: 6 weeks

Properly flatten openssh/dist.

Resolve conflicts.

Vendor import of OpenSSH 4.5p1.

Merge conflicts.

MFC after: 1 week

Vendor import of OpenSSH 4.4p1.

Merge conflicts.

Vendor import of OpenSSH 4.3p1.

Resolve conflicts.

Vendor import of OpenSSH 4.2p1.

Resolve conflicts.

Vendor import of OpenSSH 4.1p1.

Vendor import of OpenSSH 4.0p1.

Resolve conflicts

Vendor import of OpenSSH 3.9p1.

Resolve conflicts.

Vendor import of OpenSSH 3.8.1p1.

Resolve conflicts.

Vendor import of OpenSSH 3.8p1.

Resolve conflicts and remove obsolete files.

Sponsored by: registrar.no

Vendor import of OpenSSH 3.7.1p2.

Resolve conflicts.

Vendor import of OpenSSH-portable 3.6.1p1.

Resolve conflicts.

Vendor import of OpenSSH-portable 3.5p1.

Canonicize the host name before looking it up in the host file.

Sponsored by: DARPA, NAI Labs

Forcibly revert to mainline.

Vendor import of OpenSSH 3.3p1.

Resolve conflicts. Known issues:

- sshd fails to set TERM correctly.
- privilege separation may break PAM and is currently turned off.
- man pages have not yet been updated

I will have these issues resolved, and privilege separation turned on by
default, in time for DP2.

Sponsored by: DARPA, NAI Labs

Vendor import of OpenSSH 3.3.

Fix conflicts.

Vendor import of OpenSSH 3.1

Make libssh.so useable (undefined reference to IPv4or6).

Reviewed by: des, markm
Approved by: markm

Modify a "You don't exist" message, pretty rude for transient YP failures.

fix renamed options in some of the code that was #ifdef AFS
also print an error if krb5 ticket passing is disabled

Submitted by: Jonathan Chen <jon@spock.org>

Fix conflicts for OpenSSH 2.9.

Say "hi" to the latest in the OpenSSH series, version 2.9!

Happy birthday to: rwatson

Backout completely canonical lookup modifications.

Update to OpenSSH 2.3.0 with FreeBSD modifications. OpenSSH 2.3.0
new features description elided in favor of checking out their
website.

Important new FreeBSD-version stuff: PAM support has been worked
in, partially from the "Unix" OpenSSH version, and a lot due to the
work of Eivind Eklend, too.

This requires at least the following in pam.conf:

sshd auth sufficient pam_skey.so
sshd auth required pam_unix.so try_first_pass
sshd session required pam_permit.so

Parts by: Eivind Eklend <eivind@FreeBSD.org>

Import of OpenSSH 2.3.0 (virgin OpenBSD source release).

Remove duplicate line

Not responded to by: kris, then green

Resolve conflicts and update for OpenSSH 2.2.0

Reviewed by: gshapiro, peter, green

Initial import of OpenSSH post-2.2.0 snapshot dated 2000-09-09

So /this/ is what has made OpenSSH's SSHv2 support never work right!
In some cases, limits did not get set to the proper class, but
instead always to "default", because not all passwd copies were
done to completion.

Bring vendor patches onto the main branch, and resolve conflicts.

Import vendor patches: the first is written by
Brian Feldman <green@FreeBSD.org>

* Remove the gratuitous dependency on OpenSSL 0.9.5a (preparation for MFC)
* Disable agent forwarding by default in the client (security risk)

Submitted by: green
Obtained from: OpenBSD

Resolve conflicts and update for FreeBSD.

Initial import of OpenSSH v2.1.

Resolve conflicts.

Virgin import of OpenSSH sources dated 2000/03/25

Turn off X11 forwarding in the client. X11 forwarding in the server by
default should probably also get turned on, now.

Requested by: kris
Obtained from: OpenBSD

1) Add kerberos5 functionality.
by Daniel Kouril <kouril@informatics.muni.cz>
2) Add full LOGIN_CAP capability
by Andrey Chernov

Add the patches fom ports (QV: ports/security/openssh/patches/patch-*)

Vendor import of OpenSSH.

ssh: Update to OpenSSH 9.4p1

Excerpts from the release notes:

* ssh-agent(1): PKCS#11 modules must now be specified by their full
paths. Previously dlopen(3) could search for them in system
library directories.

* ssh(1): allow forwarding Unix Domain sockets via ssh -W.

* ssh(1): add support for configuration tags to ssh(1).
This adds a ssh_config(5) "Tag" directive and corresponding
"Match tag" predicate that may be used to select blocks of
configuration similar to the pf.conf(5) keywords of the same
name.

* ssh(1): add a "match localnetwork" predicate. This allows matching
on the addresses of available network interfaces and may be used to
vary the effective client configuration based on network location.

* ssh-agent(1): improve isolation between loaded PKCS#11 modules
by running separate ssh-pkcs11-helpers for each loaded provider.

* ssh-agent(1), ssh(1): improve defences against invalid PKCS#11
modules being loaded by checking that the requested module
contains the required symbol before loading it.

* ssh(1): don't incorrectly disable hostname canonicalization when
CanonicalizeHostname=yes and ProxyJump was expicitly set to
"none". bz3567

Full release notes at https://www.openssh.com/txt/release-9.4

Relnotes: Yes
Sponsored by: The FreeBSD Foundation

ssh: Update to OpenSSH 9.3p1

This release fixes a number of security bugs and has minor new
features and bug fixes. Security fixes, from the release notes
(https://www.openssh.com/txt/release-9.3):

This release contains fixes for a security problem and a memory
safety problem. The memory safety problem is not believed to be
exploitable, but we report most network-reachable memory faults as
security bugs.

* ssh-add(1): when adding smartcard keys to ssh-agent(1) with the
per-hop destination constraints (ssh-add -h ...) added in OpenSSH
8.9, a logic error prevented the constraints from being
communicated to the agent. This resulted in the keys being added
without constraints. The common cases of non-smartcard keys and
keys without destination constraints are unaffected. This problem
was reported by Luci Stanescu.

* ssh(1): Portable OpenSSH provides an implementation of the
getrrsetbyname(3) function if the standard library does not
provide it, for use by the VerifyHostKeyDNS feature. A
specifically crafted DNS response could cause this function to
perform an out-of-bounds read of adjacent stack data, but this
condition does not appear to be exploitable beyond denial-of-
service to the ssh(1) client.

The getrrsetbyname(3) replacement is only included if the system's
standard library lacks this function and portable OpenSSH was not
compiled with the ldns library (--with-ldns). getrrsetbyname(3) is
only invoked if using VerifyHostKeyDNS to fetch SSHFP records. This
problem was found by the Coverity static analyzer.

Sponsored by: The FreeBSD Foundation

ssh: fix leak and apply style(9) to hostname canonicalization

Fixes: bf2e2524a2ce ("ssh: canonicize the host name before...")
Fixes: 3e74849a1ee2 ("ssh: canonicize the host name before...")
Reviewed by: rew
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D38441

ssh: update to OpenSSH 9.2p1

Release notes are available at https://www.openssh.com/txt/release-9.2

OpenSSH 9.2 contains fixes for two security problems and a memory safety
problem. The memory safety problem is not believed to be exploitable.
These fixes have already been committed to OpenSSH 9.1 in FreeBSD.

Some other notable items from the release notes:

* ssh(1): add a new EnableEscapeCommandline ssh_config(5) option that
controls whether the client-side ~C escape sequence that provides a
command-line is available. Among other things, the ~C command-line
could be used to add additional port-forwards at runtime.

* sshd(8): add support for channel inactivity timeouts via a new
sshd_config(5) ChannelTimeout directive. This allows channels that
have not seen traffic in a configurable interval to be
automatically closed. Different timeouts may be applied to session,
X11, agent and TCP forwarding channels.

* sshd(8): add a sshd_config UnusedConnectionTimeout option to
terminate client connections that have no open channels for a
length of time. This complements the ChannelTimeout option above.

* sshd(8): add a -V (version) option to sshd like the ssh client has.

* scp(1), sftp(1): add a -X option to both scp(1) and sftp(1) to
allow control over some SFTP protocol parameters: the copy buffer
length and the number of in-flight requests, both of which are used
during upload/download. Previously these could be controlled in
sftp(1) only. This makes them available in both SFTP protocol
clients using the same option character sequence.

* ssh-keyscan(1): allow scanning of complete CIDR address ranges,
e.g. "ssh-keyscan 192.168.0.0/24". If a CIDR range is passed, then
it will be expanded to all possible addresses in the range
including the all-0s and all-1s addresses. bz#976

* ssh(1): support dynamic remote port forwarding in escape
command-line's -R processing. bz#3499

MFC after: 1 week
Sponsored by: The FreeBSD Foundation

ssh: Be more paranoid with host/domain names coming from the

never write a name with bad characters to a known_hosts file.

replace recently-added valid_domain() check for hostnames going to
known_hosts with a more relaxed check for bad characters.

Obtained from: OpenSSH-portable commit 445363433ba2
Obtained from: OpenSSH-portable commit 3cae9f92a318
Sponsored by: The FreeBSD Foundation

ssh: update to OpenSSH 9.1p1

Release notes are available at https://www.openssh.com/txt/release-9.1

9.1 contains fixes for three minor memory safety problems; these have
lready been merged to the copy of OpenSSH 9.0 that is in the FreeBSD base
system.

Some highlights copied from the release notes:

Potentially-incompatible changes
--------------------------------

* ssh(1), sshd(8): SetEnv directives in ssh_config and sshd_config
are now first-match-wins to match other directives. Previously
if an environment variable was multiply specified the last set
value would have been used. bz3438

* ssh-keygen(8): ssh-keygen -A (generate all default host key types)
will no longer generate DSA keys, as these are insecure and have
not been used by default for some years.

New features
------------

* ssh(1), sshd(8): add a RequiredRSASize directive to set a minimum
RSA key length. Keys below this length will be ignored for user
authentication and for host authentication in sshd(8).

* sftp-server(8): add a "users-groups-by-id@openssh.com" extension
request that allows the client to obtain user/group names that
correspond to a set of uids/gids.

* sftp(1): use "users-groups-by-id@openssh.com" sftp-server
extension (when available) to fill in user/group names for
directory listings.

* sftp-server(8): support the "home-directory" extension request
defined in draft-ietf-secsh-filexfer-extensions-00. This overlaps
a bit with the existing "expand-path@openssh.com", but some other
clients support it.

* ssh-keygen(1), sshd(8): allow certificate validity intervals,
sshsig verification times and authorized_keys expiry-time options
to accept dates in the UTC time zone in addition to the default
of interpreting them in the system time zone. YYYYMMDD and
YYMMDDHHMM[SS] dates/times will be interpreted as UTC if suffixed
with a 'Z' character.

Also allow certificate validity intervals to be specified in raw
seconds-since-epoch as hex value, e.g. -V 0x1234:0x4567890. This
is intended for use by regress tests and other tools that call
ssh-keygen as part of a CA workflow. bz3468

* sftp(1): allow arguments to the sftp -D option, e.g. sftp -D
"/usr/libexec/sftp-server -el debug3"

* ssh-keygen(1): allow the existing -U (use agent) flag to work
with "-Y sign" operations, where it will be interpreted to require
that the private keys is hosted in an agent; bz3429

MFC after: 2 weeks
Relnotes: Yes
Sponsored by: The FreeBSD Foundation

ssh: retire client VersionAddendum

FreeBSD introduced VersionAddendum for the server as a local change in
2001 in commit 933ca70f8f88 and later extended it to the client in
commit 9e2cbe04ff4f.

In 2012 upstream added support for server VersionAddendum, in commit
23528816dc10. They do not support it for the client.

The argument for supporting this in the client is not nearly as strong
as for the server, so retire this option to reduce the scope of our
local patch set. This also avoids some cases of conflicts in ssh_config
during update, as a user's configuration would typically follow the
commented-out default VersionAddendum value.

Reviewed by: gordon, glebius
Relnotes: yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D32930

ssh: use upstream SSH_OPENSSL_VERSION macro

With the upgrade to OpenSSH 6.7p1 in commit a0ee8cc636cd we replaced
WITH_OPENSSL ifdefs with an OPENSSL_VERSION macro, later changing it
to OPENSSL_VERSION_STRING.

A few years later OpenSSH made an equivalent change (with a different
macro name), in commit 4d94b031ff88. Switch to the macro name they
chose.

MFC after: 1 week
Sponsored by: The FreeBSD Foundation

ssh: drop $FreeBSD$ from crypto/openssh

After we moved to git $FreeBSD$ is no longer expanded and serves no
purpose. Remove them from OpenSSH to reduce diffs against upstream.

Sponsored by: The FreeBSD Foundation

ssh: apply style(9) to version_addendum

Reported by: allanjude (in review D29953)
Fixes: 462c32cb8d7a ("Upgrade OpenSSH to 6.1p1.")
MFC after: 1 week
Sponsored by: The FreeBSD Foundation

ssh: update to OpenSSH v9.0p1

Release notes are available at https://www.openssh.com/txt/release-9.0

Some highlights:

* ssh(1), sshd(8): use the hybrid Streamlined NTRU Prime + x25519 key
exchange method by default ("sntrup761x25519-sha512@openssh.com").
The NTRU algorithm is believed to resist attacks enabled by future
quantum computers and is paired with the X25519 ECDH key exchange
(the previous default) as a backstop against any weaknesses in
NTRU Prime that may be discovered in the future. The combination
ensures that the hybrid exchange offers at least as good security
as the status quo.

* sftp-server(8): support the "copy-data" extension to allow server-
side copying of files/data, following the design in
draft-ietf-secsh-filexfer-extensions-00. bz2948

* sftp(1): add a "cp" command to allow the sftp client to perform
server-side file copies.

This commit excludes the scp(1) change to use the SFTP protocol by
default; that change will immediately follow.

MFC after: 1 month
Relnotes: Yes
Sponsored by: The FreeBSD Foundation

ssh: update to OpenSSH v8.9p1

Release notes are available at https://www.openssh.com/txt/release-8.9

Some highlights:

* ssh(1), sshd(8), ssh-add(1), ssh-agent(1): add a system for
restricting forwarding and use of keys added to ssh-agent(1)

* ssh(1), sshd(8): add the sntrup761x25519-sha512@openssh.com hybrid
ECDH/x25519 + Streamlined NTRU Prime post-quantum KEX to the
default KEXAlgorithms list (after the ECDH methods but before the
prime-group DH ones). The next release of OpenSSH is likely to
make this key exchange the default method.

* sshd(8), portable OpenSSH only: this release removes in-built
support for MD5-hashed passwords. If you require these on your
system then we recommend linking against libxcrypt or similar.

Future deprecation notice
=========================

A near-future release of OpenSSH will switch scp(1) from using the
legacy scp/rcp protocol to using SFTP by default.

Legacy scp/rcp performs wildcard expansion of remote filenames (e.g.
"scp host:* .") through the remote shell. This has the side effect of
requiring double quoting of shell meta-characters in file names
included on scp(1) command-lines, otherwise they could be interpreted
as shell commands on the remote side.

MFC after: 1 month
Relnotes: Yes
Sponsored by: The FreeBSD Foundation

ssh: update to OpenSSH v8.8p1

OpenSSH v8.8p1 was motivated primarily by a security update and
deprecation of RSA/SHA1 signatures. It also has a few minor bug fixes.

The security update was already applied to FreeBSD as an independent
change, and the RSA/SHA1 deprecation is excluded from this commit but
will immediately follow.

MFC after: 1 month
Relnotes: Yes
Sponsored by: The FreeBSD Foundation

openssh: update to OpenSSH v8.7p1

Some notable changes, from upstream's release notes:

- sshd(8): Remove support for obsolete "host/port" syntax.
- ssh(1): When prompting whether to record a new host key, accept the key
fingerprint as a synonym for "yes".
- ssh-keygen(1): when acting as a CA and signing certificates with an RSA
key, default to using the rsa-sha2-512 signature algorithm.
- ssh(1), sshd(8), ssh-keygen(1): this release removes the "ssh-rsa"
(RSA/SHA1) algorithm from those accepted for certificate signatures.
- ssh-sk-helper(8): this is a new binary. It is used by the FIDO/U2F
support to provide address-space isolation for token middleware
libraries (including the internal one).
- ssh(1): this release enables UpdateHostkeys by default subject to some
conservative preconditions.
- scp(1): this release changes the behaviour of remote to remote copies
(e.g. "scp host-a:/path host-b:") to transfer through the local host
by default.
- scp(1): experimental support for transfers using the SFTP protocol as
a replacement for the venerable SCP/RCP protocol that it has
traditionally used.

Additional integration work is needed to support FIDO/U2F in the base
system.

Deprecation Notice
------------------

OpenSSH will disable the ssh-rsa signature scheme by default in the
next release.

Reviewed by: imp
MFC after: 1 month
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D29985

Upgrade to OpenSSH 7.9p1.

MFC after: 2 months
Sponsored by: The FreeBSD Foundation

openssh: rename local macro to avoid OpenSSL 1.1.1 conflict

Local changes introduced an OPENSSH_VERSION macro, but this conflicts
with a macro of the same name introduced with OepnsSL 1.1.1

Reviewed by: des
Approved by: re (gjb)
MFC after: 1 week
Sponsored by: The FreeBSD Foundation

Upgrade to OpenSSH 7.8p1.

Approved by: re (kib@)

Upgrade to OpenSSH 7.7p1.

Upgrade to OpenSSH 7.6p1. This will be followed shortly by 7.7p1.

This completely removes client-side support for the SSH 1 protocol,
which was already disabled in 12 but is still enabled in 11. For that
reason, we will not be able to merge 7.6p1 or newer back to 11.

Upgrade to OpenSSH 7.5p1.

Upgrade to OpenSSH 7.4p1.

Upgrade to OpenSSH 7.3p1.

Upgrade to OpenSSH 7.2p2.

Explain why we don't include VersionAddendum in the debug mode banner.

Upgrade to OpenSSH 7.0p1.

Upgrade to OpenSSH 6.9p1.

Upgrade to OpenSSH 6.8p1.

Upgrade to OpenSSH 6.7p1, retaining libwrap support (which has been removed
upstream) and a number of security fixes which we had already backported.

MFC after: 1 week

As previously threatened, remove the HPN patch from OpenSSH.

Retire the NONE cipher option.

Remove /* $FreeBSD$ */ from files that already have __RCSID("$FreeBSD$").

ssh: canonicize the host name before looking it up in the host file

Re-apply r99054 by des in 2002. This was accidentally dropped
by the update to OpenSSH 6.5p1 (r261320).

This change is actually taken from r387082 of
ports/security/openssh-portable/files/patch-ssh.c

PR: 198043
Differential Revision: https://reviews.freebsd.org/D3103
Reviewed by: des
Approved by: kib (mentor)
MFC after: 3 days
Relnotes: yes
Sponsored by: Dell Inc.

Restore the pX part to the version number printed in debugging mode.

Upgrade to OpenSSH 6.6p1.

Upgrade to OpenSSH 6.5p1.

Upgrade to 6.3p1.

Approved by: re (gjb)

Merge updated "no such identity file" patch.

PR: bin/178060

Merge upstream patch to silence spurious "no such identity file" warnings.

Upgrade OpenSSH to 6.1p1.

OpenSSH: allow VersionAddendum to be used again

Prior to this, setting VersionAddendum will be a no-op: one will
always have BASE_VERSION + " " + VERSION_HPN for VersionAddendum
set in the config and a bare BASE_VERSION + VERSION_HPN when there
is no VersionAddendum is set.

HPN patch requires both parties to have the "hpn" inside their
advertized versions, so we add VERSION_HPN to the VERSION_BASE
if HPN is enabled and omitting it if HPN is disabled.

VersionAddendum now uses the following logics:
* unset (default value): append " " and VERSION_ADDENDUM;
* VersionAddendum is set and isn't empty: append " "
and VersionAddendum;
* VersionAddendum is set and empty: don't append anything.

Approved by: des
Reviewed by: bz
MFC after: 3 days

Polish diff against upstream.

- Revert unneeded whitespace changes.
- Revert modifications to loginrec.c, as the upstream version already
does the right thing.
- Fix indentation and whitespace of local changes.

Approved by: des
MFC after: 1 month

Upgrade to OpenSSH 5.9p1.

MFC after: 3 months

Add support for dynamically adjusted buffers to allow the full use of
the bandwidth of long fat pipes (i.e. 100Mbps+ trans-oceanic or
trans-continental links). Bandwidth-delay products up to 64MB are
supported.

Also add support (not compiled by default) for the None cypher. The
None cypher can only be enabled on non-interactive sessions (those
without a pty where -T was not used) and must be enabled in both
the client and server configuration files and on the client command
line. Additionally, the None cypher will only be activated after
authentication is complete. To enable the None cypher you must add
-DNONE_CIPHER_ENABLED to CFLAGS via the make command line or in
/etc/make.conf.

This code is a style(9) compliant version of these features extracted
from the patches published at:

http://www.psc.edu/networking/projects/hpn-ssh/

Merging this patch has been a collaboration between me and Bjoern.

Reviewed by: bz
Approved by: re (kib), des (maintainer)

Upgrade to OpenSSH 5.8p2.

Upgrade to OpenSSH 5.6p1.

Upgrade to OpenSSH 5.4p1.

MFC after: 1 month

Upgrade to OpenSSH 5.3p1.

Upgrade to OpenSSH 5.2p1.

MFC after: 3 months

Upgrade to OpenSSH 5.1p1.

I have worked hard to reduce diffs against the vendor branch. One
notable change in that respect is that we no longer prefer DSA over
RSA - the reasons for doing so went away years ago. This may cause
some surprises, as ssh will warn about unknown host keys even for
hosts whose keys haven't changed.

MFC after: 6 weeks

Properly flatten openssh/dist.

Resolve conflicts.

Vendor import of OpenSSH 4.5p1.