ssh: Update to OpenSSH 9.4p1

Excerpts from the release notes:

* ssh-agent(1): PKCS#11 modules must now be specified by their full
paths. Previously dlopen(3) could search for them in system
library directories.

* ssh(1): allow forwarding Unix Domain sockets via ssh -W.

* ssh(1): add support for configuration tags to ssh(1).
This adds a ssh_config(5) "Tag" directive and corresponding
"Match tag" predicate that may be used to select blocks of
configuration similar to the pf.conf(5) keywords of the same
name.

* ssh(1): add a "match localnetwork" predicate. This allows matching
on the addresses of available network interfaces and may be used to
vary the effective client configuration based on network location.

* ssh-agent(1): improve isolation between loaded PKCS#11 modules
by running separate ssh-pkcs11-helpers for each loaded provider.

* ssh-agent(1), ssh(1): improve defences against invalid PKCS#11
modules being loaded by checking that the requested module
contains the required symbol before loading it.

* ssh(1): don't incorrectly disable hostname canonicalization when
CanonicalizeHostname=yes and ProxyJump was expicitly set to
"none". bz3567

Full release notes at https://www.openssh.com/txt/release-9.4

Relnotes: Yes
Sponsored by: The FreeBSD Foundation

ssh: update to OpenSSH 9.1p1

Release notes are available at https://www.openssh.com/txt/release-9.1

9.1 contains fixes for three minor memory safety problems; these have
lready been merged to the copy of OpenSSH 9.0 that is in the FreeBSD base
system.

Some highlights copied from the release notes:

Potentially-incompatible changes
--------------------------------

* ssh(1), sshd(8): SetEnv directives in ssh_config and sshd_config
are now first-match-wins to match other directives. Previously
if an environment variable was multiply specified the last set
value would have been used. bz3438

* ssh-keygen(8): ssh-keygen -A (generate all default host key types)
will no longer generate DSA keys, as these are insecure and have
not been used by default for some years.

New features
------------

* ssh(1), sshd(8): add a RequiredRSASize directive to set a minimum
RSA key length. Keys below this length will be ignored for user
authentication and for host authentication in sshd(8).

* sftp-server(8): add a "users-groups-by-id@openssh.com" extension
request that allows the client to obtain user/group names that
correspond to a set of uids/gids.

* sftp(1): use "users-groups-by-id@openssh.com" sftp-server
extension (when available) to fill in user/group names for
directory listings.

* sftp-server(8): support the "home-directory" extension request
defined in draft-ietf-secsh-filexfer-extensions-00. This overlaps
a bit with the existing "expand-path@openssh.com", but some other
clients support it.

* ssh-keygen(1), sshd(8): allow certificate validity intervals,
sshsig verification times and authorized_keys expiry-time options
to accept dates in the UTC time zone in addition to the default
of interpreting them in the system time zone. YYYYMMDD and
YYMMDDHHMM[SS] dates/times will be interpreted as UTC if suffixed
with a 'Z' character.

Also allow certificate validity intervals to be specified in raw
seconds-since-epoch as hex value, e.g. -V 0x1234:0x4567890. This
is intended for use by regress tests and other tools that call
ssh-keygen as part of a CA workflow. bz3468

* sftp(1): allow arguments to the sftp -D option, e.g. sftp -D
"/usr/libexec/sftp-server -el debug3"

* ssh-keygen(1): allow the existing -U (use agent) flag to work
with "-Y sign" operations, where it will be interpreted to require
that the private keys is hosted in an agent; bz3429

MFC after: 2 weeks
Relnotes: Yes
Sponsored by: The FreeBSD Foundation

openssh: remove unnecessary $FreeBSD$ tags

Diff reduction against upstream: remove $FreeBSD$ tags from files where
the tag itself is the only difference from upstream.

openssh: update to OpenSSH v8.7p1

Some notable changes, from upstream's release notes:

- sshd(8): Remove support for obsolete "host/port" syntax.
- ssh(1): When prompting whether to record a new host key, accept the key
fingerprint as a synonym for "yes".
- ssh-keygen(1): when acting as a CA and signing certificates with an RSA
key, default to using the rsa-sha2-512 signature algorithm.
- ssh(1), sshd(8), ssh-keygen(1): this release removes the "ssh-rsa"
(RSA/SHA1) algorithm from those accepted for certificate signatures.
- ssh-sk-helper(8): this is a new binary. It is used by the FIDO/U2F
support to provide address-space isolation for token middleware
libraries (including the internal one).
- ssh(1): this release enables UpdateHostkeys by default subject to some
conservative preconditions.
- scp(1): this release changes the behaviour of remote to remote copies
(e.g. "scp host-a:/path host-b:") to transfer through the local host
by default.
- scp(1): experimental support for transfers using the SFTP protocol as
a replacement for the venerable SCP/RCP protocol that it has
traditionally used.

Additional integration work is needed to support FIDO/U2F in the base
system.

Deprecation Notice
------------------

OpenSSH will disable the ssh-rsa signature scheme by default in the
next release.

Reviewed by: imp
MFC after: 1 month
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D29985

Upgrade to OpenSSH 7.9p1.

MFC after: 2 months
Sponsored by: The FreeBSD Foundation

Upgrade to OpenSSH 7.6p1. This will be followed shortly by 7.7p1.

This completely removes client-side support for the SSH 1 protocol,
which was already disabled in 12 but is still enabled in 11. For that
reason, we will not be able to merge 7.6p1 or newer back to 11.

Upgrade to OpenSSH 7.4p1.

Upgrade to OpenSSH 6.8p1.

Remove /* $FreeBSD$ */ from files that already have __RCSID("$FreeBSD$").

Add a pre-merge script which reverts mechanical changes such as added
$FreeBSD$ tags and man page dates.

Add a post-merge script which reapplies these changes.

Run both scripts to normalize the existing code base. As a result, many
files which should have had $FreeBSD$ tags but didn't now have them.

Partly rewrite the upgrade instructions and remove the now outdated
list of tricks.

Upgrade to OpenSSH 6.5p1.

Upgrade to 6.3p1.

Approved by: re (gjb)

Upgrade to OpenSSH 5.4p1.

MFC after: 1 month

Properly flatten openssh/dist.

Vendor import of OpenSSH 4.4p1.

Vendor import of OpenSSH 3.8p1.

Vendor import of OpenSSH 3.7.1p2.

Vendor import of OpenSSH-portable 3.6.1p1.

Vendor import of OpenSSH-portable 3.5p1.

Vendor import of OpenSSH 3.4p1.

Vendor import of OpenSSH 3.1

Say "hi" to the latest in the OpenSSH series, version 2.9!

Happy birthday to: rwatson

ssh: update to OpenSSH 9.1p1

Release notes are available at https://www.openssh.com/txt/release-9.1

9.1 contains fixes for three minor memory safety problems; these have
lready been merged to the copy of OpenSSH 9.0 that is in the FreeBSD base
system.

Some highlights copied from the release notes:

Potentially-incompatible changes
--------------------------------

* ssh(1), sshd(8): SetEnv directives in ssh_config and sshd_config
are now first-match-wins to match other directives. Previously
if an environment variable was multiply specified the last set
value would have been used. bz3438

* ssh-keygen(8): ssh-keygen -A (generate all default host key types)
will no longer generate DSA keys, as these are insecure and have
not been used by default for some years.

New features
------------

* ssh(1), sshd(8): add a RequiredRSASize directive to set a minimum
RSA key length. Keys below this length will be ignored for user
authentication and for host authentication in sshd(8).

* sftp-server(8): add a "users-groups-by-id@openssh.com" extension
request that allows the client to obtain user/group names that
correspond to a set of uids/gids.

* sftp(1): use "users-groups-by-id@openssh.com" sftp-server
extension (when available) to fill in user/group names for
directory listings.

* sftp-server(8): support the "home-directory" extension request
defined in draft-ietf-secsh-filexfer-extensions-00. This overlaps
a bit with the existing "expand-path@openssh.com", but some other
clients support it.

* ssh-keygen(1), sshd(8): allow certificate validity intervals,
sshsig verification times and authorized_keys expiry-time options
to accept dates in the UTC time zone in addition to the default
of interpreting them in the system time zone. YYYYMMDD and
YYMMDDHHMM[SS] dates/times will be interpreted as UTC if suffixed
with a 'Z' character.

Also allow certificate validity intervals to be specified in raw
seconds-since-epoch as hex value, e.g. -V 0x1234:0x4567890. This
is intended for use by regress tests and other tools that call
ssh-keygen as part of a CA workflow. bz3468

* sftp(1): allow arguments to the sftp -D option, e.g. sftp -D
"/usr/libexec/sftp-server -el debug3"

* ssh-keygen(1): allow the existing -U (use agent) flag to work
with "-Y sign" operations, where it will be interpreted to require
that the private keys is hosted in an agent; bz3429

MFC after: 2 weeks
Relnotes: Yes
Sponsored by: The FreeBSD Foundation

openssh: remove unnecessary $FreeBSD$ tags

Diff reduction against upstream: remove $FreeBSD$ tags from files where
the tag itself is the only difference from upstream.

openssh: update to OpenSSH v8.7p1

Some notable changes, from upstream's release notes:

- sshd(8): Remove support for obsolete "host/port" syntax.
- ssh(1): When prompting whether to record a new host key, accept the key
fingerprint as a synonym for "yes".
- ssh-keygen(1): when acting as a CA and signing certificates with an RSA
key, default to using the rsa-sha2-512 signature algorithm.
- ssh(1), sshd(8), ssh-keygen(1): this release removes the "ssh-rsa"
(RSA/SHA1) algorithm from those accepted for certificate signatures.
- ssh-sk-helper(8): this is a new binary. It is used by the FIDO/U2F
support to provide address-space isolation for token middleware
libraries (including the internal one).
- ssh(1): this release enables UpdateHostkeys by default subject to some
conservative preconditions.
- scp(1): this release changes the behaviour of remote to remote copies
(e.g. "scp host-a:/path host-b:") to transfer through the local host
by default.
- scp(1): experimental support for transfers using the SFTP protocol as
a replacement for the venerable SCP/RCP protocol that it has
traditionally used.

Additional integration work is needed to support FIDO/U2F in the base
system.

Deprecation Notice
------------------

OpenSSH will disable the ssh-rsa signature scheme by default in the
next release.

Reviewed by: imp
MFC after: 1 month
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D29985

Upgrade to OpenSSH 7.9p1.

MFC after: 2 months
Sponsored by: The FreeBSD Foundation

Upgrade to OpenSSH 7.6p1. This will be followed shortly by 7.7p1.

This completely removes client-side support for the SSH 1 protocol,
which was already disabled in 12 but is still enabled in 11. For that
reason, we will not be able to merge 7.6p1 or newer back to 11.

Upgrade to OpenSSH 7.4p1.

Upgrade to OpenSSH 6.8p1.

Remove /* $FreeBSD$ */ from files that already have __RCSID("$FreeBSD$").

Add a pre-merge script which reverts mechanical changes such as added
$FreeBSD$ tags and man page dates.

Add a post-merge script which reapplies these changes.

Run both scripts to normalize the existing code base. As a result, many
files which should have had $FreeBSD$ tags but didn't now have them.

Partly rewrite the upgrade instructions and remove the now outdated
list of tricks.

Upgrade to OpenSSH 6.5p1.

Upgrade to 6.3p1.

Approved by: re (gjb)

Upgrade to OpenSSH 5.4p1.

MFC after: 1 month

Properly flatten openssh/dist.

Vendor import of OpenSSH 4.4p1.

Vendor import of OpenSSH 3.8p1.

Vendor import of OpenSSH 3.7.1p2.

Vendor import of OpenSSH-portable 3.6.1p1.

Vendor import of OpenSSH-portable 3.5p1.

Vendor import of OpenSSH 3.4p1.

Vendor import of OpenSSH 3.1

Say "hi" to the latest in the OpenSSH series, version 2.9!

Happy birthday to: rwatson

openssh: remove unnecessary $FreeBSD$ tags

Diff reduction against upstream: remove $FreeBSD$ tags from files where
the tag itself is the only difference from upstream.

Remove /* $FreeBSD$ */ from files that already have __RCSID("$FreeBSD$").

Add a pre-merge script which reverts mechanical changes such as added
$FreeBSD$ tags and man page dates.

Add a post-merge script which reapplies these changes.

Run both scripts to normalize the existing code base. As a result, many
files which should have had $FreeBSD$ tags but didn't now have them.

Partly rewrite the upgrade instructions and remove the now outdated
list of tricks.

A new jail(8) with a configuration file, to replace the work currently done
by /etc/rc.d/jail.

MFH OpenSSH 5.4p1

Create the altix project branch. The altix project will add support
for the SGI Altix 350 to FreeBSD/ia64. The hardware used for porting
is a two-module system, consisting of a base compute module and a
CPU expansion module. SGI's NUMAFlex architecture can be an excellent
platform to test CPU affinity and NUMA-aware features in FreeBSD.

- Import the HEAD csup code which is the basis for the cvsmode work.

Vendor import of OpenSSH 4.4p1.

Vendor import of OpenSSH 3.8p1.

Vendor import of OpenSSH 3.7.1p2.

Vendor import of OpenSSH-portable 3.6.1p1.

Vendor import of OpenSSH-portable 3.5p1.

Vendor import of OpenSSH 3.4p1.

Vendor import of OpenSSH 3.1

Say "hi" to the latest in the OpenSSH series, version 2.9!

Happy birthday to: rwatson