ssh: update to OpenSSH 9.2p1

Release notes are available at https://www.openssh.com/txt/release-9.2

OpenSSH 9.2 contains fixes for two security problems and a memory safety
problem. The memory safety problem is not believed to be exploitable.
These fixes have already been committed to OpenSSH 9.1 in FreeBSD.

Some other notable items from the release notes:

* ssh(1): add a new EnableEscapeCommandline ssh_config(5) option that
controls whether the client-side ~C escape sequence that provides a
command-line is available. Among other things, the ~C command-line
could be used to add additional port-forwards at runtime.

* sshd(8): add support for channel inactivity timeouts via a new
sshd_config(5) ChannelTimeout directive. This allows channels that
have not seen traffic in a configurable interval to be
automatically closed. Different timeouts may be applied to session,
X11, agent and TCP forwarding channels.

* sshd(8): add a sshd_config UnusedConnectionTimeout option to
terminate client connections that have no open channels for a
length of time. This complements the ChannelTimeout option above.

* sshd(8): add a -V (version) option to sshd like the ssh client has.

* scp(1), sftp(1): add a -X option to both scp(1) and sftp(1) to
allow control over some SFTP protocol parameters: the copy buffer
length and the number of in-flight requests, both of which are used
during upload/download. Previously these could be controlled in
sftp(1) only. This makes them available in both SFTP protocol
clients using the same option character sequence.

* ssh-keyscan(1): allow scanning of complete CIDR address ranges,
e.g. "ssh-keyscan 192.168.0.0/24". If a CIDR range is passed, then
it will be expanded to all possible addresses in the range
including the all-0s and all-1s addresses. bz#976

* ssh(1): support dynamic remote port forwarding in escape
command-line's -R processing. bz#3499

MFC after: 1 week
Sponsored by: The FreeBSD Foundation

ssh: update to OpenSSH 9.1p1

Release notes are available at https://www.openssh.com/txt/release-9.1

9.1 contains fixes for three minor memory safety problems; these have
lready been merged to the copy of OpenSSH 9.0 that is in the FreeBSD base
system.

Some highlights copied from the release notes:

Potentially-incompatible changes
--------------------------------

* ssh(1), sshd(8): SetEnv directives in ssh_config and sshd_config
are now first-match-wins to match other directives. Previously
if an environment variable was multiply specified the last set
value would have been used. bz3438

* ssh-keygen(8): ssh-keygen -A (generate all default host key types)
will no longer generate DSA keys, as these are insecure and have
not been used by default for some years.

New features
------------

* ssh(1), sshd(8): add a RequiredRSASize directive to set a minimum
RSA key length. Keys below this length will be ignored for user
authentication and for host authentication in sshd(8).

* sftp-server(8): add a "users-groups-by-id@openssh.com" extension
request that allows the client to obtain user/group names that
correspond to a set of uids/gids.

* sftp(1): use "users-groups-by-id@openssh.com" sftp-server
extension (when available) to fill in user/group names for
directory listings.

* sftp-server(8): support the "home-directory" extension request
defined in draft-ietf-secsh-filexfer-extensions-00. This overlaps
a bit with the existing "expand-path@openssh.com", but some other
clients support it.

* ssh-keygen(1), sshd(8): allow certificate validity intervals,
sshsig verification times and authorized_keys expiry-time options
to accept dates in the UTC time zone in addition to the default
of interpreting them in the system time zone. YYYYMMDD and
YYMMDDHHMM[SS] dates/times will be interpreted as UTC if suffixed
with a 'Z' character.

Also allow certificate validity intervals to be specified in raw
seconds-since-epoch as hex value, e.g. -V 0x1234:0x4567890. This
is intended for use by regress tests and other tools that call
ssh-keygen as part of a CA workflow. bz3468

* sftp(1): allow arguments to the sftp -D option, e.g. sftp -D
"/usr/libexec/sftp-server -el debug3"

* ssh-keygen(1): allow the existing -U (use agent) flag to work
with "-Y sign" operations, where it will be interpreted to require
that the private keys is hosted in an agent; bz3429

MFC after: 2 weeks
Relnotes: Yes
Sponsored by: The FreeBSD Foundation

scp: switch to using the SFTP protocol by default

From upstream release notes https://www.openssh.com/txt/release-9.0

This release switches scp(1) from using the legacy scp/rcp protocol
to using the SFTP protocol by default.

Legacy scp/rcp performs wildcard expansion of remote filenames (e.g.
"scp host:* .") through the remote shell. This has the side effect of
requiring double quoting of shell meta-characters in file names
included on scp(1) command-lines, otherwise they could be interpreted
as shell commands on the remote side.

This creates one area of potential incompatibility: scp(1) when using
the SFTP protocol no longer requires this finicky and brittle quoting,
and attempts to use it may cause transfers to fail. We consider the
removal of the need for double-quoting shell characters in file names
to be a benefit and do not intend to introduce bug-compatibility for
legacy scp/rcp in scp(1) when using the SFTP protocol.

Another area of potential incompatibility relates to the use of remote
paths relative to other user's home directories, for example -
"scp host:~user/file /tmp". The SFTP protocol has no native way to
expand a ~user path. However, sftp-server(8) in OpenSSH 8.7 and later
support a protocol extension "expand-path@openssh.com" to support
this.

In case of incompatibility, the scp(1) client may be instructed to use
the legacy scp/rcp using the -O flag.

Relnotes: Yes
Sponsored by: The FreeBSD Foundation

ssh: update to OpenSSH v8.9p1

Release notes are available at https://www.openssh.com/txt/release-8.9

Some highlights:

* ssh(1), sshd(8), ssh-add(1), ssh-agent(1): add a system for
restricting forwarding and use of keys added to ssh-agent(1)

* ssh(1), sshd(8): add the sntrup761x25519-sha512@openssh.com hybrid
ECDH/x25519 + Streamlined NTRU Prime post-quantum KEX to the
default KEXAlgorithms list (after the ECDH methods but before the
prime-group DH ones). The next release of OpenSSH is likely to
make this key exchange the default method.

* sshd(8), portable OpenSSH only: this release removes in-built
support for MD5-hashed passwords. If you require these on your
system then we recommend linking against libxcrypt or similar.

Future deprecation notice
=========================

A near-future release of OpenSSH will switch scp(1) from using the
legacy scp/rcp protocol to using SFTP by default.

Legacy scp/rcp performs wildcard expansion of remote filenames (e.g.
"scp host:* .") through the remote shell. This has the side effect of
requiring double quoting of shell meta-characters in file names
included on scp(1) command-lines, otherwise they could be interpreted
as shell commands on the remote side.

MFC after: 1 month
Relnotes: Yes
Sponsored by: The FreeBSD Foundation

ssh: update to OpenSSH v8.8p1

OpenSSH v8.8p1 was motivated primarily by a security update and
deprecation of RSA/SHA1 signatures. It also has a few minor bug fixes.

The security update was already applied to FreeBSD as an independent
change, and the RSA/SHA1 deprecation is excluded from this commit but
will immediately follow.

MFC after: 1 month
Relnotes: Yes
Sponsored by: The FreeBSD Foundation

openssh: update to OpenSSH v8.7p1

Some notable changes, from upstream's release notes:

- sshd(8): Remove support for obsolete "host/port" syntax.
- ssh(1): When prompting whether to record a new host key, accept the key
fingerprint as a synonym for "yes".
- ssh-keygen(1): when acting as a CA and signing certificates with an RSA
key, default to using the rsa-sha2-512 signature algorithm.
- ssh(1), sshd(8), ssh-keygen(1): this release removes the "ssh-rsa"
(RSA/SHA1) algorithm from those accepted for certificate signatures.
- ssh-sk-helper(8): this is a new binary. It is used by the FIDO/U2F
support to provide address-space isolation for token middleware
libraries (including the internal one).
- ssh(1): this release enables UpdateHostkeys by default subject to some
conservative preconditions.
- scp(1): this release changes the behaviour of remote to remote copies
(e.g. "scp host-a:/path host-b:") to transfer through the local host
by default.
- scp(1): experimental support for transfers using the SFTP protocol as
a replacement for the venerable SCP/RCP protocol that it has
traditionally used.

Additional integration work is needed to support FIDO/U2F in the base
system.

Deprecation Notice
------------------

OpenSSH will disable the ssh-rsa signature scheme by default in the
next release.

Reviewed by: imp
MFC after: 1 month
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D29985

Upgrade to OpenSSH 7.9p1.

MFC after: 2 months
Sponsored by: The FreeBSD Foundation

scp: validate filenames provided by server against wildcard in client

OpenSSH-portable commits:

check in scp client that filenames sent during remote->local directory
copies satisfy the wildcard specified by the user.

This checking provides some protection against a malicious server
sending unexpected filenames, but it comes at a risk of rejecting wanted
files due to differences between client and server wildcard expansion rules.

For this reason, this also adds a new -T flag to disable the check.

reported by Harry Sintonen
fix approach suggested by markus@;
has been in snaps for ~1wk courtesy deraadt@

OpenBSD-Commit-ID: 00f44b50d2be8e321973f3c6d014260f8f7a8eda

Minor patch conflict (getopt) resolved.

Obtained from: OpenSSH-portable 391ffc4b9d31fa1f4ad566499fef9176ff8a07dc

scp: add -T to usage();

OpenBSD-Commit-ID: a7ae14d9436c64e1bd05022329187ea3a0ce1899

Obtained from: OpenSSH-portable 2c21b75a7be6ebdcbceaebb43157c48dbb36f3d8

PR: 234965
Approved by: des
MFC after: 3 days
Obtained from: OpenSSH-portable 391ffc4b9d, 2c21b75a7b
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D19076

Upgrade to OpenSSH 7.8p1.

Approved by: re (kib@)

Upgrade to OpenSSH 7.7p1.

Upgrade to OpenSSH 7.6p1. This will be followed shortly by 7.7p1.

This completely removes client-side support for the SSH 1 protocol,
which was already disabled in 12 but is still enabled in 11. For that
reason, we will not be able to merge 7.6p1 or newer back to 11.

Upgrade to OpenSSH 7.3p1.

Upgrade to OpenSSH 7.2p2.

Upgrade to OpenSSH 7.0p1.

Upgrade to OpenSSH 6.8p1.

Upgrade to OpenSSH 6.7p1, retaining libwrap support (which has been removed
upstream) and a number of security fixes which we had already backported.

MFC after: 1 week

Now that we have mandoc, we can leave $Mdocdate$ tags as-is. Unfortunately,
there is (currently) no way to make Subversion generate correct $Mdocdate$
tags, but perhas we can teach mandoc to read Subversion's %d format.

Add a pre-merge script which reverts mechanical changes such as added
$FreeBSD$ tags and man page dates.

Add a post-merge script which reapplies these changes.

Run both scripts to normalize the existing code base. As a result, many
files which should have had $FreeBSD$ tags but didn't now have them.

Partly rewrite the upgrade instructions and remove the now outdated
list of tricks.

Upgrade to OpenSSH 6.5p1.

Upgrade to 6.3p1.

Approved by: re (gjb)

Upgrade to OpenSSH 6.2p1. The most important new features are support
for a key revocation list and more fine-grained authentication control.

Upgrade OpenSSH to 6.1p1.

Upgrade to OpenSSH 5.8p2.

Missing commas

Upgrade to OpenSSH 5.4p1.

MFC after: 1 month

Our groff doesn't understand $Mdocdate$, so replace them with bare dates.

MFC after: 3 days

Upgrade to OpenSSH 5.1p1.

I have worked hard to reduce diffs against the vendor branch. One
notable change in that respect is that we no longer prefer DSA over
RSA - the reasons for doing so went away years ago. This may cause
some surprises, as ssh will warn about unknown host keys even for
hosts whose keys haven't changed.

MFC after: 6 weeks

Properly flatten openssh/dist.

Vendor import of OpenSSH 4.4p1.

Vendor import of OpenSSH 4.3p1.

Vendor import of OpenSSH 4.0p1.

Vendor import of OpenSSH 3.9p1.

Vendor import of OpenSSH 3.8.1p1.

Vendor import of OpenSSH 3.8p1.

Vendor import of OpenSSH 3.7.1p2.

Vendor import of OpenSSH-portable 3.6.1p1.

Vendor import of OpenSSH 3.4p1.

Vendor import of OpenSSH 3.3.

Vendor import of OpenSSH 3.1

Say "hi" to the latest in the OpenSSH series, version 2.9!

Happy birthday to: rwatson

Import of OpenSSH 2.3.0 (virgin OpenBSD source release).

Initial import of OpenSSH post-2.2.0 snapshot dated 2000-09-09

Initial import of OpenSSH v2.1.

Virgin import of OpenSSH sources dated 2000/03/25

Vendor import of OpenSSH.

ssh: update to OpenSSH 9.1p1

Release notes are available at https://www.openssh.com/txt/release-9.1

9.1 contains fixes for three minor memory safety problems; these have
lready been merged to the copy of OpenSSH 9.0 that is in the FreeBSD base
system.

Some highlights copied from the release notes:

Potentially-incompatible changes
--------------------------------

* ssh(1), sshd(8): SetEnv directives in ssh_config and sshd_config
are now first-match-wins to match other directives. Previously
if an environment variable was multiply specified the last set
value would have been used. bz3438

* ssh-keygen(8): ssh-keygen -A (generate all default host key types)
will no longer generate DSA keys, as these are insecure and have
not been used by default for some years.

New features
------------

* ssh(1), sshd(8): add a RequiredRSASize directive to set a minimum
RSA key length. Keys below this length will be ignored for user
authentication and for host authentication in sshd(8).

* sftp-server(8): add a "users-groups-by-id@openssh.com" extension
request that allows the client to obtain user/group names that
correspond to a set of uids/gids.

* sftp(1): use "users-groups-by-id@openssh.com" sftp-server
extension (when available) to fill in user/group names for
directory listings.

* sftp-server(8): support the "home-directory" extension request
defined in draft-ietf-secsh-filexfer-extensions-00. This overlaps
a bit with the existing "expand-path@openssh.com", but some other
clients support it.

* ssh-keygen(1), sshd(8): allow certificate validity intervals,
sshsig verification times and authorized_keys expiry-time options
to accept dates in the UTC time zone in addition to the default
of interpreting them in the system time zone. YYYYMMDD and
YYMMDDHHMM[SS] dates/times will be interpreted as UTC if suffixed
with a 'Z' character.

Also allow certificate validity intervals to be specified in raw
seconds-since-epoch as hex value, e.g. -V 0x1234:0x4567890. This
is intended for use by regress tests and other tools that call
ssh-keygen as part of a CA workflow. bz3468

* sftp(1): allow arguments to the sftp -D option, e.g. sftp -D
"/usr/libexec/sftp-server -el debug3"

* ssh-keygen(1): allow the existing -U (use agent) flag to work
with "-Y sign" operations, where it will be interpreted to require
that the private keys is hosted in an agent; bz3429

MFC after: 2 weeks
Relnotes: Yes
Sponsored by: The FreeBSD Foundation

scp: switch to using the SFTP protocol by default

From upstream release notes https://www.openssh.com/txt/release-9.0

This release switches scp(1) from using the legacy scp/rcp protocol
to using the SFTP protocol by default.

Legacy scp/rcp performs wildcard expansion of remote filenames (e.g.
"scp host:* .") through the remote shell. This has the side effect of
requiring double quoting of shell meta-characters in file names
included on scp(1) command-lines, otherwise they could be interpreted
as shell commands on the remote side.

This creates one area of potential incompatibility: scp(1) when using
the SFTP protocol no longer requires this finicky and brittle quoting,
and attempts to use it may cause transfers to fail. We consider the
removal of the need for double-quoting shell characters in file names
to be a benefit and do not intend to introduce bug-compatibility for
legacy scp/rcp in scp(1) when using the SFTP protocol.

Another area of potential incompatibility relates to the use of remote
paths relative to other user's home directories, for example -
"scp host:~user/file /tmp". The SFTP protocol has no native way to
expand a ~user path. However, sftp-server(8) in OpenSSH 8.7 and later
support a protocol extension "expand-path@openssh.com" to support
this.

In case of incompatibility, the scp(1) client may be instructed to use
the legacy scp/rcp using the -O flag.

Relnotes: Yes
Sponsored by: The FreeBSD Foundation

ssh: update to OpenSSH v8.9p1

Release notes are available at https://www.openssh.com/txt/release-8.9

Some highlights:

* ssh(1), sshd(8), ssh-add(1), ssh-agent(1): add a system for
restricting forwarding and use of keys added to ssh-agent(1)

* ssh(1), sshd(8): add the sntrup761x25519-sha512@openssh.com hybrid
ECDH/x25519 + Streamlined NTRU Prime post-quantum KEX to the
default KEXAlgorithms list (after the ECDH methods but before the
prime-group DH ones). The next release of OpenSSH is likely to
make this key exchange the default method.

* sshd(8), portable OpenSSH only: this release removes in-built
support for MD5-hashed passwords. If you require these on your
system then we recommend linking against libxcrypt or similar.

Future deprecation notice
=========================

A near-future release of OpenSSH will switch scp(1) from using the
legacy scp/rcp protocol to using SFTP by default.

Legacy scp/rcp performs wildcard expansion of remote filenames (e.g.
"scp host:* .") through the remote shell. This has the side effect of
requiring double quoting of shell meta-characters in file names
included on scp(1) command-lines, otherwise they could be interpreted
as shell commands on the remote side.

MFC after: 1 month
Relnotes: Yes
Sponsored by: The FreeBSD Foundation

ssh: update to OpenSSH v8.8p1

OpenSSH v8.8p1 was motivated primarily by a security update and
deprecation of RSA/SHA1 signatures. It also has a few minor bug fixes.

The security update was already applied to FreeBSD as an independent
change, and the RSA/SHA1 deprecation is excluded from this commit but
will immediately follow.

MFC after: 1 month
Relnotes: Yes
Sponsored by: The FreeBSD Foundation

openssh: update to OpenSSH v8.7p1

Some notable changes, from upstream's release notes:

- sshd(8): Remove support for obsolete "host/port" syntax.
- ssh(1): When prompting whether to record a new host key, accept the key
fingerprint as a synonym for "yes".
- ssh-keygen(1): when acting as a CA and signing certificates with an RSA
key, default to using the rsa-sha2-512 signature algorithm.
- ssh(1), sshd(8), ssh-keygen(1): this release removes the "ssh-rsa"
(RSA/SHA1) algorithm from those accepted for certificate signatures.
- ssh-sk-helper(8): this is a new binary. It is used by the FIDO/U2F
support to provide address-space isolation for token middleware
libraries (including the internal one).
- ssh(1): this release enables UpdateHostkeys by default subject to some
conservative preconditions.
- scp(1): this release changes the behaviour of remote to remote copies
(e.g. "scp host-a:/path host-b:") to transfer through the local host
by default.
- scp(1): experimental support for transfers using the SFTP protocol as
a replacement for the venerable SCP/RCP protocol that it has
traditionally used.

Additional integration work is needed to support FIDO/U2F in the base
system.

Deprecation Notice
------------------

OpenSSH will disable the ssh-rsa signature scheme by default in the
next release.

Reviewed by: imp
MFC after: 1 month
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D29985

Upgrade to OpenSSH 7.9p1.

MFC after: 2 months
Sponsored by: The FreeBSD Foundation

scp: validate filenames provided by server against wildcard in client

OpenSSH-portable commits:

check in scp client that filenames sent during remote->local directory
copies satisfy the wildcard specified by the user.

This checking provides some protection against a malicious server
sending unexpected filenames, but it comes at a risk of rejecting wanted
files due to differences between client and server wildcard expansion rules.

For this reason, this also adds a new -T flag to disable the check.

reported by Harry Sintonen
fix approach suggested by markus@;
has been in snaps for ~1wk courtesy deraadt@

OpenBSD-Commit-ID: 00f44b50d2be8e321973f3c6d014260f8f7a8eda

Minor patch conflict (getopt) resolved.

Obtained from: OpenSSH-portable 391ffc4b9d31fa1f4ad566499fef9176ff8a07dc

scp: add -T to usage();

OpenBSD-Commit-ID: a7ae14d9436c64e1bd05022329187ea3a0ce1899

Obtained from: OpenSSH-portable 2c21b75a7be6ebdcbceaebb43157c48dbb36f3d8

PR: 234965
Approved by: des
MFC after: 3 days
Obtained from: OpenSSH-portable 391ffc4b9d, 2c21b75a7b
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D19076

Upgrade to OpenSSH 7.8p1.

Approved by: re (kib@)

Upgrade to OpenSSH 7.7p1.

Upgrade to OpenSSH 7.6p1. This will be followed shortly by 7.7p1.

This completely removes client-side support for the SSH 1 protocol,
which was already disabled in 12 but is still enabled in 11. For that
reason, we will not be able to merge 7.6p1 or newer back to 11.

Upgrade to OpenSSH 7.3p1.

Upgrade to OpenSSH 7.2p2.

Upgrade to OpenSSH 7.0p1.

Upgrade to OpenSSH 6.8p1.

Upgrade to OpenSSH 6.7p1, retaining libwrap support (which has been removed
upstream) and a number of security fixes which we had already backported.

MFC after: 1 week

Now that we have mandoc, we can leave $Mdocdate$ tags as-is. Unfortunately,
there is (currently) no way to make Subversion generate correct $Mdocdate$
tags, but perhas we can teach mandoc to read Subversion's %d format.

Add a pre-merge script which reverts mechanical changes such as added
$FreeBSD$ tags and man page dates.

Add a post-merge script which reapplies these changes.

Run both scripts to normalize the existing code base. As a result, many
files which should have had $FreeBSD$ tags but didn't now have them.

Partly rewrite the upgrade instructions and remove the now outdated
list of tricks.

Upgrade to OpenSSH 6.5p1.

Upgrade to 6.3p1.

Approved by: re (gjb)

Upgrade to OpenSSH 6.2p1. The most important new features are support
for a key revocation list and more fine-grained authentication control.

Upgrade OpenSSH to 6.1p1.

Upgrade to OpenSSH 5.8p2.

Missing commas

Upgrade to OpenSSH 5.4p1.

MFC after: 1 month

Our groff doesn't understand $Mdocdate$, so replace them with bare dates.

MFC after: 3 days

Upgrade to OpenSSH 5.1p1.

I have worked hard to reduce diffs against the vendor branch. One
notable change in that respect is that we no longer prefer DSA over
RSA - the reasons for doing so went away years ago. This may cause
some surprises, as ssh will warn about unknown host keys even for
hosts whose keys haven't changed.

MFC after: 6 weeks

Properly flatten openssh/dist.

Vendor import of OpenSSH 4.4p1.

Vendor import of OpenSSH 4.3p1.

Vendor import of OpenSSH 4.0p1.

Vendor import of OpenSSH 3.9p1.

Vendor import of OpenSSH 3.8.1p1.

Vendor import of OpenSSH 3.8p1.

Vendor import of OpenSSH 3.7.1p2.

Vendor import of OpenSSH-portable 3.6.1p1.

Vendor import of OpenSSH 3.4p1.

Vendor import of OpenSSH 3.3.

Vendor import of OpenSSH 3.1

Say "hi" to the latest in the OpenSSH series, version 2.9!

Happy birthday to: rwatson

Import of OpenSSH 2.3.0 (virgin OpenBSD source release).

Initial import of OpenSSH post-2.2.0 snapshot dated 2000-09-09

Initial import of OpenSSH v2.1.

Virgin import of OpenSSH sources dated 2000/03/25

Vendor import of OpenSSH.

scp: switch to using the SFTP protocol by default

From upstream release notes https://www.openssh.com/txt/release-9.0

This release switches scp(1) from using the legacy scp/rcp protocol
to using the SFTP protocol by default.

Legacy scp/rcp performs wildcard expansion of remote filenames (e.g.
"scp host:* .") through the remote shell. This has the side effect of
requiring double quoting of shell meta-characters in file names
included on scp(1) command-lines, otherwise they could be interpreted
as shell commands on the remote side.

This creates one area of potential incompatibility: scp(1) when using
the SFTP protocol no longer requires this finicky and brittle quoting,
and attempts to use it may cause transfers to fail. We consider the
removal of the need for double-quoting shell characters in file names
to be a benefit and do not intend to introduce bug-compatibility for
legacy scp/rcp in scp(1) when using the SFTP protocol.

Another area of potential incompatibility relates to the use of remote
paths relative to other user's home directories, for example -
"scp host:~user/file /tmp". The SFTP protocol has no native way to
expand a ~user path. However, sftp-server(8) in OpenSSH 8.7 and later
support a protocol extension "expand-path@openssh.com" to support
this.

In case of incompatibility, the scp(1) client may be instructed to use
the legacy scp/rcp using the -O flag.

Relnotes: Yes
Sponsored by: The FreeBSD Foundation

ssh: update to OpenSSH v8.9p1

Release notes are available at https://www.openssh.com/txt/release-8.9

Some highlights:

* ssh(1), sshd(8), ssh-add(1), ssh-agent(1): add a system for
restricting forwarding and use of keys added to ssh-agent(1)

* ssh(1), sshd(8): add the sntrup761x25519-sha512@openssh.com hybrid
ECDH/x25519 + Streamlined NTRU Prime post-quantum KEX to the
default KEXAlgorithms list (after the ECDH methods but before the
prime-group DH ones). The next release of OpenSSH is likely to
make this key exchange the default method.

* sshd(8), portable OpenSSH only: this release removes in-built
support for MD5-hashed passwords. If you require these on your
system then we recommend linking against libxcrypt or similar.

Future deprecation notice
=========================

A near-future release of OpenSSH will switch scp(1) from using the
legacy scp/rcp protocol to using SFTP by default.

Legacy scp/rcp performs wildcard expansion of remote filenames (e.g.
"scp host:* .") through the remote shell. This has the side effect of
requiring double quoting of shell meta-characters in file names
included on scp(1) command-lines, otherwise they could be interpreted
as shell commands on the remote side.

MFC after: 1 month
Relnotes: Yes
Sponsored by: The FreeBSD Foundation

ssh: update to OpenSSH v8.8p1

OpenSSH v8.8p1 was motivated primarily by a security update and
deprecation of RSA/SHA1 signatures. It also has a few minor bug fixes.

The security update was already applied to FreeBSD as an independent
change, and the RSA/SHA1 deprecation is excluded from this commit but
will immediately follow.

MFC after: 1 month
Relnotes: Yes
Sponsored by: The FreeBSD Foundation

openssh: update to OpenSSH v8.7p1

Some notable changes, from upstream's release notes:

- sshd(8): Remove support for obsolete "host/port" syntax.
- ssh(1): When prompting whether to record a new host key, accept the key
fingerprint as a synonym for "yes".
- ssh-keygen(1): when acting as a CA and signing certificates with an RSA
key, default to using the rsa-sha2-512 signature algorithm.
- ssh(1), sshd(8), ssh-keygen(1): this release removes the "ssh-rsa"
(RSA/SHA1) algorithm from those accepted for certificate signatures.
- ssh-sk-helper(8): this is a new binary. It is used by the FIDO/U2F
support to provide address-space isolation for token middleware
libraries (including the internal one).
- ssh(1): this release enables UpdateHostkeys by default subject to some
conservative preconditions.
- scp(1): this release changes the behaviour of remote to remote copies
(e.g. "scp host-a:/path host-b:") to transfer through the local host
by default.
- scp(1): experimental support for transfers using the SFTP protocol as
a replacement for the venerable SCP/RCP protocol that it has
traditionally used.

Additional integration work is needed to support FIDO/U2F in the base
system.

Deprecation Notice
------------------

OpenSSH will disable the ssh-rsa signature scheme by default in the
next release.

Reviewed by: imp
MFC after: 1 month
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D29985

Upgrade to OpenSSH 7.9p1.

MFC after: 2 months
Sponsored by: The FreeBSD Foundation

scp: validate filenames provided by server against wildcard in client

OpenSSH-portable commits:

check in scp client that filenames sent during remote->local directory
copies satisfy the wildcard specified by the user.

This checking provides some protection against a malicious server
sending unexpected filenames, but it comes at a risk of rejecting wanted
files due to differences between client and server wildcard expansion rules.

For this reason, this also adds a new -T flag to disable the check.

reported by Harry Sintonen
fix approach suggested by markus@;
has been in snaps for ~1wk courtesy deraadt@

OpenBSD-Commit-ID: 00f44b50d2be8e321973f3c6d014260f8f7a8eda

Minor patch conflict (getopt) resolved.

Obtained from: OpenSSH-portable 391ffc4b9d31fa1f4ad566499fef9176ff8a07dc

scp: add -T to usage();

OpenBSD-Commit-ID: a7ae14d9436c64e1bd05022329187ea3a0ce1899

Obtained from: OpenSSH-portable 2c21b75a7be6ebdcbceaebb43157c48dbb36f3d8

PR: 234965
Approved by: des
MFC after: 3 days
Obtained from: OpenSSH-portable 391ffc4b9d, 2c21b75a7b
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D19076

Upgrade to OpenSSH 7.8p1.

Approved by: re (kib@)

Upgrade to OpenSSH 7.7p1.

Upgrade to OpenSSH 7.6p1. This will be followed shortly by 7.7p1.

This completely removes client-side support for the SSH 1 protocol,
which was already disabled in 12 but is still enabled in 11. For that
reason, we will not be able to merge 7.6p1 or newer back to 11.

Upgrade to OpenSSH 7.3p1.

Upgrade to OpenSSH 7.2p2.

Upgrade to OpenSSH 7.0p1.

Upgrade to OpenSSH 6.8p1.

Upgrade to OpenSSH 6.7p1, retaining libwrap support (which has been removed
upstream) and a number of security fixes which we had already backported.

MFC after: 1 week

Now that we have mandoc, we can leave $Mdocdate$ tags as-is. Unfortunately,
there is (currently) no way to make Subversion generate correct $Mdocdate$
tags, but perhas we can teach mandoc to read Subversion's %d format.

Add a pre-merge script which reverts mechanical changes such as added
$FreeBSD$ tags and man page dates.

Add a post-merge script which reapplies these changes.

Run both scripts to normalize the existing code base. As a result, many
files which should have had $FreeBSD$ tags but didn't now have them.

Partly rewrite the upgrade instructions and remove the now outdated
list of tricks.

Upgrade to OpenSSH 6.5p1.

Upgrade to 6.3p1.

Approved by: re (gjb)

Upgrade to OpenSSH 6.2p1. The most important new features are support
for a key revocation list and more fine-grained authentication control.

Upgrade OpenSSH to 6.1p1.

Upgrade to OpenSSH 5.8p2.

Missing commas

Upgrade to OpenSSH 5.4p1.

MFC after: 1 month

Our groff doesn't understand $Mdocdate$, so replace them with bare dates.

MFC after: 3 days

Upgrade to OpenSSH 5.1p1.

I have worked hard to reduce diffs against the vendor branch. One
notable change in that respect is that we no longer prefer DSA over
RSA - the reasons for doing so went away years ago. This may cause
some surprises, as ssh will warn about unknown host keys even for
hosts whose keys haven't changed.

MFC after: 6 weeks

Properly flatten openssh/dist.

Vendor import of OpenSSH 4.4p1.

Vendor import of OpenSSH 4.3p1.

Vendor import of OpenSSH 4.0p1.

Vendor import of OpenSSH 3.9p1.

Vendor import of OpenSSH 3.8.1p1.

Vendor import of OpenSSH 3.8p1.

Vendor import of OpenSSH 3.7.1p2.

Vendor import of OpenSSH-portable 3.6.1p1.

Vendor import of OpenSSH 3.4p1.

Vendor import of OpenSSH 3.3.

Vendor import of OpenSSH 3.1

Say "hi" to the latest in the OpenSSH series, version 2.9!

Happy birthday to: rwatson

Import of OpenSSH 2.3.0 (virgin OpenBSD source release).

Initial import of OpenSSH post-2.2.0 snapshot dated 2000-09-09

Initial import of OpenSSH v2.1.

Virgin import of OpenSSH sources dated 2000/03/25

Vendor import of OpenSSH.

ssh: update to OpenSSH v8.8p1

OpenSSH v8.8p1 was motivated primarily by a security update and
deprecation of RSA/SHA1 signatures. It also has a few minor bug fixes.

The security update was already applied to FreeBSD as an independent
change, and the RSA/SHA1 deprecation is excluded from this commit but
will immediately follow.

MFC after: 1 month
Relnotes: Yes
Sponsored by: The FreeBSD Foundation

openssh: update to OpenSSH v8.7p1

Some notable changes, from upstream's release notes:

- sshd(8): Remove support for obsolete "host/port" syntax.
- ssh(1): When prompting whether to record a new host key, accept the key
fingerprint as a synonym for "yes".
- ssh-keygen(1): when acting as a CA and signing certificates with an RSA
key, default to using the rsa-sha2-512 signature algorithm.
- ssh(1), sshd(8), ssh-keygen(1): this release removes the "ssh-rsa"
(RSA/SHA1) algorithm from those accepted for certificate signatures.
- ssh-sk-helper(8): this is a new binary. It is used by the FIDO/U2F
support to provide address-space isolation for token middleware
libraries (including the internal one).
- ssh(1): this release enables UpdateHostkeys by default subject to some
conservative preconditions.
- scp(1): this release changes the behaviour of remote to remote copies
(e.g. "scp host-a:/path host-b:") to transfer through the local host
by default.
- scp(1): experimental support for transfers using the SFTP protocol as
a replacement for the venerable SCP/RCP protocol that it has
traditionally used.

Additional integration work is needed to support FIDO/U2F in the base
system.

Deprecation Notice
------------------

OpenSSH will disable the ssh-rsa signature scheme by default in the
next release.

Reviewed by: imp
MFC after: 1 month
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D29985

Upgrade to OpenSSH 7.9p1.

MFC after: 2 months
Sponsored by: The FreeBSD Foundation

scp: validate filenames provided by server against wildcard in client

OpenSSH-portable commits:

check in scp client that filenames sent during remote->local directory
copies satisfy the wildcard specified by the user.

This checking provides some protection against a malicious server
sending unexpected filenames, but it comes at a risk of rejecting wanted
files due to differences between client and server wildcard expansion rules.

For this reason, this also adds a new -T flag to disable the check.

reported by Harry Sintonen
fix approach suggested by markus@;
has been in snaps for ~1wk courtesy deraadt@

OpenBSD-Commit-ID: 00f44b50d2be8e321973f3c6d014260f8f7a8eda

Minor patch conflict (getopt) resolved.

Obtained from: OpenSSH-portable 391ffc4b9d31fa1f4ad566499fef9176ff8a07dc

scp: add -T to usage();

OpenBSD-Commit-ID: a7ae14d9436c64e1bd05022329187ea3a0ce1899

Obtained from: OpenSSH-portable 2c21b75a7be6ebdcbceaebb43157c48dbb36f3d8

PR: 234965
Approved by: des
MFC after: 3 days
Obtained from: OpenSSH-portable 391ffc4b9d, 2c21b75a7b
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D19076

Upgrade to OpenSSH 7.8p1.

Approved by: re (kib@)

Upgrade to OpenSSH 7.7p1.

Upgrade to OpenSSH 7.6p1. This will be followed shortly by 7.7p1.

This completely removes client-side support for the SSH 1 protocol,
which was already disabled in 12 but is still enabled in 11. For that
reason, we will not be able to merge 7.6p1 or newer back to 11.

Upgrade to OpenSSH 7.3p1.

Upgrade to OpenSSH 7.2p2.

Upgrade to OpenSSH 7.0p1.

Upgrade to OpenSSH 6.8p1.

Upgrade to OpenSSH 6.7p1, retaining libwrap support (which has been removed
upstream) and a number of security fixes which we had already backported.

MFC after: 1 week

Now that we have mandoc, we can leave $Mdocdate$ tags as-is. Unfortunately,
there is (currently) no way to make Subversion generate correct $Mdocdate$
tags, but perhas we can teach mandoc to read Subversion's %d format.

Add a pre-merge script which reverts mechanical changes such as added
$FreeBSD$ tags and man page dates.

Add a post-merge script which reapplies these changes.

Run both scripts to normalize the existing code base. As a result, many
files which should have had $FreeBSD$ tags but didn't now have them.

Partly rewrite the upgrade instructions and remove the now outdated
list of tricks.

Upgrade to OpenSSH 6.5p1.

Upgrade to 6.3p1.

Approved by: re (gjb)

Upgrade to OpenSSH 6.2p1. The most important new features are support
for a key revocation list and more fine-grained authentication control.

Upgrade OpenSSH to 6.1p1.

Upgrade to OpenSSH 5.8p2.

Missing commas

Upgrade to OpenSSH 5.4p1.

MFC after: 1 month

Our groff doesn't understand $Mdocdate$, so replace them with bare dates.

MFC after: 3 days

Upgrade to OpenSSH 5.1p1.

I have worked hard to reduce diffs against the vendor branch. One
notable change in that respect is that we no longer prefer DSA over
RSA - the reasons for doing so went away years ago. This may cause
some surprises, as ssh will warn about unknown host keys even for
hosts whose keys haven't changed.

MFC after: 6 weeks

Properly flatten openssh/dist.

Vendor import of OpenSSH 4.4p1.

Vendor import of OpenSSH 4.3p1.

Vendor import of OpenSSH 4.0p1.

Vendor import of OpenSSH 3.9p1.

Vendor import of OpenSSH 3.8.1p1.

Vendor import of OpenSSH 3.8p1.

Vendor import of OpenSSH 3.7.1p2.

Vendor import of OpenSSH-portable 3.6.1p1.

Vendor import of OpenSSH 3.4p1.

Vendor import of OpenSSH 3.3.

Vendor import of OpenSSH 3.1

Say "hi" to the latest in the OpenSSH series, version 2.9!

Happy birthday to: rwatson

Import of OpenSSH 2.3.0 (virgin OpenBSD source release).

Initial import of OpenSSH post-2.2.0 snapshot dated 2000-09-09

Initial import of OpenSSH v2.1.

Virgin import of OpenSSH sources dated 2000/03/25

Vendor import of OpenSSH.

openssh: update to OpenSSH v8.7p1

Some notable changes, from upstream's release notes:

- sshd(8): Remove support for obsolete "host/port" syntax.
- ssh(1): When prompting whether to record a new host key, accept the key
fingerprint as a synonym for "yes".
- ssh-keygen(1): when acting as a CA and signing certificates with an RSA
key, default to using the rsa-sha2-512 signature algorithm.
- ssh(1), sshd(8), ssh-keygen(1): this release removes the "ssh-rsa"
(RSA/SHA1) algorithm from those accepted for certificate signatures.
- ssh-sk-helper(8): this is a new binary. It is used by the FIDO/U2F
support to provide address-space isolation for token middleware
libraries (including the internal one).
- ssh(1): this release enables UpdateHostkeys by default subject to some
conservative preconditions.
- scp(1): this release changes the behaviour of remote to remote copies
(e.g. "scp host-a:/path host-b:") to transfer through the local host
by default.
- scp(1): experimental support for transfers using the SFTP protocol as
a replacement for the venerable SCP/RCP protocol that it has
traditionally used.

Additional integration work is needed to support FIDO/U2F in the base
system.

Deprecation Notice
------------------

OpenSSH will disable the ssh-rsa signature scheme by default in the
next release.

Reviewed by: imp
MFC after: 1 month
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D29985

Upgrade to OpenSSH 7.9p1.

MFC after: 2 months
Sponsored by: The FreeBSD Foundation

scp: validate filenames provided by server against wildcard in client

OpenSSH-portable commits:

check in scp client that filenames sent during remote->local directory
copies satisfy the wildcard specified by the user.

This checking provides some protection against a malicious server
sending unexpected filenames, but it comes at a risk of rejecting wanted
files due to differences between client and server wildcard expansion rules.

For this reason, this also adds a new -T flag to disable the check.

reported by Harry Sintonen
fix approach suggested by markus@;
has been in snaps for ~1wk courtesy deraadt@

OpenBSD-Commit-ID: 00f44b50d2be8e321973f3c6d014260f8f7a8eda

Minor patch conflict (getopt) resolved.

Obtained from: OpenSSH-portable 391ffc4b9d31fa1f4ad566499fef9176ff8a07dc

scp: add -T to usage();

OpenBSD-Commit-ID: a7ae14d9436c64e1bd05022329187ea3a0ce1899

Obtained from: OpenSSH-portable 2c21b75a7be6ebdcbceaebb43157c48dbb36f3d8

PR: 234965
Approved by: des
MFC after: 3 days
Obtained from: OpenSSH-portable 391ffc4b9d, 2c21b75a7b
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D19076

Upgrade to OpenSSH 7.8p1.

Approved by: re (kib@)

Upgrade to OpenSSH 7.7p1.

Upgrade to OpenSSH 7.6p1. This will be followed shortly by 7.7p1.

This completely removes client-side support for the SSH 1 protocol,
which was already disabled in 12 but is still enabled in 11. For that
reason, we will not be able to merge 7.6p1 or newer back to 11.

Upgrade to OpenSSH 7.3p1.

Upgrade to OpenSSH 7.2p2.

Upgrade to OpenSSH 7.0p1.

Upgrade to OpenSSH 6.8p1.

Upgrade to OpenSSH 6.7p1, retaining libwrap support (which has been removed
upstream) and a number of security fixes which we had already backported.

MFC after: 1 week

Now that we have mandoc, we can leave $Mdocdate$ tags as-is. Unfortunately,
there is (currently) no way to make Subversion generate correct $Mdocdate$
tags, but perhas we can teach mandoc to read Subversion's %d format.

Add a pre-merge script which reverts mechanical changes such as added
$FreeBSD$ tags and man page dates.

Add a post-merge script which reapplies these changes.

Run both scripts to normalize the existing code base. As a result, many
files which should have had $FreeBSD$ tags but didn't now have them.

Partly rewrite the upgrade instructions and remove the now outdated
list of tricks.

Upgrade to OpenSSH 6.5p1.

Upgrade to 6.3p1.

Approved by: re (gjb)

Upgrade to OpenSSH 6.2p1. The most important new features are support
for a key revocation list and more fine-grained authentication control.

Upgrade OpenSSH to 6.1p1.

Upgrade to OpenSSH 5.8p2.

Missing commas

Upgrade to OpenSSH 5.4p1.

MFC after: 1 month

Our groff doesn't understand $Mdocdate$, so replace them with bare dates.

MFC after: 3 days

Upgrade to OpenSSH 5.1p1.

I have worked hard to reduce diffs against the vendor branch. One
notable change in that respect is that we no longer prefer DSA over
RSA - the reasons for doing so went away years ago. This may cause
some surprises, as ssh will warn about unknown host keys even for
hosts whose keys haven't changed.

MFC after: 6 weeks

Properly flatten openssh/dist.

Vendor import of OpenSSH 4.4p1.

Vendor import of OpenSSH 4.3p1.

Vendor import of OpenSSH 4.0p1.

Vendor import of OpenSSH 3.9p1.

Vendor import of OpenSSH 3.8.1p1.

Vendor import of OpenSSH 3.8p1.

Vendor import of OpenSSH 3.7.1p2.

Vendor import of OpenSSH-portable 3.6.1p1.

Vendor import of OpenSSH 3.4p1.

Vendor import of OpenSSH 3.3.

Vendor import of OpenSSH 3.1

Say "hi" to the latest in the OpenSSH series, version 2.9!

Happy birthday to: rwatson

Import of OpenSSH 2.3.0 (virgin OpenBSD source release).

Initial import of OpenSSH post-2.2.0 snapshot dated 2000-09-09

Initial import of OpenSSH v2.1.

Virgin import of OpenSSH sources dated 2000/03/25

Vendor import of OpenSSH.

Now that we have mandoc, we can leave $Mdocdate$ tags as-is. Unfortunately,
there is (currently) no way to make Subversion generate correct $Mdocdate$
tags, but perhas we can teach mandoc to read Subversion's %d format.

Add a pre-merge script which reverts mechanical changes such as added
$FreeBSD$ tags and man page dates.

Add a post-merge script which reapplies these changes.

Run both scripts to normalize the existing code base. As a result, many
files which should have had $FreeBSD$ tags but didn't now have them.

Partly rewrite the upgrade instructions and remove the now outdated
list of tricks.

A new jail(8) with a configuration file, to replace the work currently done
by /etc/rc.d/jail.

Missing commas in Dd

Approved by: re (kib@)

Missing commas

MFH OpenSSH 5.4p1

Create the altix project branch. The altix project will add support
for the SGI Altix 350 to FreeBSD/ia64. The hardware used for porting
is a two-module system, consisting of a base compute module and a
CPU expansion module. SGI's NUMAFlex architecture can be an excellent
platform to test CPU affinity and NUMA-aware features in FreeBSD.

- Import the HEAD csup code which is the basis for the cvsmode work.

Our groff doesn't understand $Mdocdate$, so replace them with bare dates.

MFC after: 3 days

Vendor import of OpenSSH 4.4p1.

Vendor import of OpenSSH 4.3p1.

Vendor import of OpenSSH 4.0p1.

Vendor import of OpenSSH 3.9p1.

Vendor import of OpenSSH 3.8.1p1.

Vendor import of OpenSSH 3.8p1.

Vendor import of OpenSSH 3.7.1p2.

Vendor import of OpenSSH-portable 3.6.1p1.

Vendor import of OpenSSH 3.4p1.

Vendor import of OpenSSH 3.3.

Vendor import of OpenSSH 3.1

Say "hi" to the latest in the OpenSSH series, version 2.9!

Happy birthday to: rwatson

Import of OpenSSH 2.3.0 (virgin OpenBSD source release).

Initial import of OpenSSH post-2.2.0 snapshot dated 2000-09-09

Initial import of OpenSSH v2.1.

Virgin import of OpenSSH sources dated 2000/03/25

Vendor import of OpenSSH.