#
535af610 |
|
10-Aug-2023 |
Ed Maste <emaste@FreeBSD.org> |
ssh: Update to OpenSSH 9.4p1 Excerpts from the release notes: * ssh-agent(1): PKCS#11 modules must now be specified by their full paths. Previously dlopen(3) could search for them in system library directories. * ssh(1): allow forwarding Unix Domain sockets via ssh -W. * ssh(1): add support for configuration tags to ssh(1). This adds a ssh_config(5) "Tag" directive and corresponding "Match tag" predicate that may be used to select blocks of configuration similar to the pf.conf(5) keywords of the same name. * ssh(1): add a "match localnetwork" predicate. This allows matching on the addresses of available network interfaces and may be used to vary the effective client configuration based on network location. * ssh-agent(1): improve isolation between loaded PKCS#11 modules by running separate ssh-pkcs11-helpers for each loaded provider. * ssh-agent(1), ssh(1): improve defences against invalid PKCS#11 modules being loaded by checking that the requested module contains the required symbol before loading it. * ssh(1): don't incorrectly disable hostname canonicalization when CanonicalizeHostname=yes and ProxyJump was expicitly set to "none". bz3567 Full release notes at https://www.openssh.com/txt/release-9.4 Relnotes: Yes Sponsored by: The FreeBSD Foundation
|
#
4d3fc8b0 |
|
16-Mar-2023 |
Ed Maste <emaste@FreeBSD.org> |
ssh: Update to OpenSSH 9.3p1 This release fixes a number of security bugs and has minor new features and bug fixes. Security fixes, from the release notes (https://www.openssh.com/txt/release-9.3): This release contains fixes for a security problem and a memory safety problem. The memory safety problem is not believed to be exploitable, but we report most network-reachable memory faults as security bugs. * ssh-add(1): when adding smartcard keys to ssh-agent(1) with the per-hop destination constraints (ssh-add -h ...) added in OpenSSH 8.9, a logic error prevented the constraints from being communicated to the agent. This resulted in the keys being added without constraints. The common cases of non-smartcard keys and keys without destination constraints are unaffected. This problem was reported by Luci Stanescu. * ssh(1): Portable OpenSSH provides an implementation of the getrrsetbyname(3) function if the standard library does not provide it, for use by the VerifyHostKeyDNS feature. A specifically crafted DNS response could cause this function to perform an out-of-bounds read of adjacent stack data, but this condition does not appear to be exploitable beyond denial-of- service to the ssh(1) client. The getrrsetbyname(3) replacement is only included if the system's standard library lacks this function and portable OpenSSH was not compiled with the ldns library (--with-ldns). getrrsetbyname(3) is only invoked if using VerifyHostKeyDNS to fetch SSHFP records. This problem was found by the Coverity static analyzer. Sponsored by: The FreeBSD Foundation
|
#
19261079 |
|
07-Sep-2021 |
Ed Maste <emaste@FreeBSD.org> |
openssh: update to OpenSSH v8.7p1 Some notable changes, from upstream's release notes: - sshd(8): Remove support for obsolete "host/port" syntax. - ssh(1): When prompting whether to record a new host key, accept the key fingerprint as a synonym for "yes". - ssh-keygen(1): when acting as a CA and signing certificates with an RSA key, default to using the rsa-sha2-512 signature algorithm. - ssh(1), sshd(8), ssh-keygen(1): this release removes the "ssh-rsa" (RSA/SHA1) algorithm from those accepted for certificate signatures. - ssh-sk-helper(8): this is a new binary. It is used by the FIDO/U2F support to provide address-space isolation for token middleware libraries (including the internal one). - ssh(1): this release enables UpdateHostkeys by default subject to some conservative preconditions. - scp(1): this release changes the behaviour of remote to remote copies (e.g. "scp host-a:/path host-b:") to transfer through the local host by default. - scp(1): experimental support for transfers using the SFTP protocol as a replacement for the venerable SCP/RCP protocol that it has traditionally used. Additional integration work is needed to support FIDO/U2F in the base system. Deprecation Notice ------------------ OpenSSH will disable the ssh-rsa signature scheme by default in the next release. Reviewed by: imp MFC after: 1 month Relnotes: Yes Sponsored by: The FreeBSD Foundation Differential Revision: https://reviews.freebsd.org/D29985
|
#
076ad2f8 |
|
01-Mar-2017 |
Dag-Erling Smørgrav <des@FreeBSD.org> |
Upgrade to OpenSSH 7.3p1.
|
#
bc5531de |
|
19-Jan-2016 |
Dag-Erling Smørgrav <des@FreeBSD.org> |
Upgrade to OpenSSH 6.8p1.
|
#
f7167e0e |
|
31-Jan-2014 |
Dag-Erling Smørgrav <des@FreeBSD.org> |
Upgrade to OpenSSH 6.5p1.
|
#
e4a9863f |
|
21-Sep-2013 |
Dag-Erling Smørgrav <des@FreeBSD.org> |
Upgrade to 6.3p1. Approved by: re (gjb)
|
#
e3ae3b09 |
|
22-Jul-2008 |
Dag-Erling Smørgrav <des@FreeBSD.org> |
Properly flatten openssh/dist. |
#
761efaa7 |
|
30-Sep-2006 |
Dag-Erling Smørgrav <des@FreeBSD.org> |
Vendor import of OpenSSH 4.4p1. |
#
021d409f |
|
22-Mar-2006 |
Dag-Erling Smørgrav <des@FreeBSD.org> |
Vendor import of OpenSSH 4.3p1. |
#
043840df |
|
03-Sep-2005 |
Dag-Erling Smørgrav <des@FreeBSD.org> |
Vendor import of OpenSSH 4.2p1. |
#
d74d50a8 |
|
28-Oct-2004 |
Dag-Erling Smørgrav <des@FreeBSD.org> |
Vendor import of OpenSSH 3.9p1. |
#
efcad6b7 |
|
26-Feb-2004 |
Dag-Erling Smørgrav <des@FreeBSD.org> |
Vendor import of OpenSSH 3.8p1. |
#
00269670 |
|
08-Jan-2004 |
Dag-Erling Smørgrav <des@FreeBSD.org> |
Don't output the terminating '\0' (already fixed in OpenSSH CVS) |
#
d95e11bf |
|
07-Jan-2004 |
Dag-Erling Smørgrav <des@FreeBSD.org> |
Vendor import of OpenSSH 3.7.1p2. |
#
d0c8c0bc |
|
23-Apr-2003 |
Dag-Erling Smørgrav <des@FreeBSD.org> |
Vendor import of OpenSSH-portable 3.6.1p1. |
#
4d3fc8b0 |
|
16-Mar-2023 |
Ed Maste <emaste@FreeBSD.org> |
ssh: Update to OpenSSH 9.3p1 This release fixes a number of security bugs and has minor new features and bug fixes. Security fixes, from the release notes (https://www.openssh.com/txt/release-9.3): This release contains fixes for a security problem and a memory safety problem. The memory safety problem is not believed to be exploitable, but we report most network-reachable memory faults as security bugs. * ssh-add(1): when adding smartcard keys to ssh-agent(1) with the per-hop destination constraints (ssh-add -h ...) added in OpenSSH 8.9, a logic error prevented the constraints from being communicated to the agent. This resulted in the keys being added without constraints. The common cases of non-smartcard keys and keys without destination constraints are unaffected. This problem was reported by Luci Stanescu. * ssh(1): Portable OpenSSH provides an implementation of the getrrsetbyname(3) function if the standard library does not provide it, for use by the VerifyHostKeyDNS feature. A specifically crafted DNS response could cause this function to perform an out-of-bounds read of adjacent stack data, but this condition does not appear to be exploitable beyond denial-of- service to the ssh(1) client. The getrrsetbyname(3) replacement is only included if the system's standard library lacks this function and portable OpenSSH was not compiled with the ldns library (--with-ldns). getrrsetbyname(3) is only invoked if using VerifyHostKeyDNS to fetch SSHFP records. This problem was found by the Coverity static analyzer. Sponsored by: The FreeBSD Foundation
|
#
19261079 |
|
07-Sep-2021 |
Ed Maste <emaste@FreeBSD.org> |
openssh: update to OpenSSH v8.7p1 Some notable changes, from upstream's release notes: - sshd(8): Remove support for obsolete "host/port" syntax. - ssh(1): When prompting whether to record a new host key, accept the key fingerprint as a synonym for "yes". - ssh-keygen(1): when acting as a CA and signing certificates with an RSA key, default to using the rsa-sha2-512 signature algorithm. - ssh(1), sshd(8), ssh-keygen(1): this release removes the "ssh-rsa" (RSA/SHA1) algorithm from those accepted for certificate signatures. - ssh-sk-helper(8): this is a new binary. It is used by the FIDO/U2F support to provide address-space isolation for token middleware libraries (including the internal one). - ssh(1): this release enables UpdateHostkeys by default subject to some conservative preconditions. - scp(1): this release changes the behaviour of remote to remote copies (e.g. "scp host-a:/path host-b:") to transfer through the local host by default. - scp(1): experimental support for transfers using the SFTP protocol as a replacement for the venerable SCP/RCP protocol that it has traditionally used. Additional integration work is needed to support FIDO/U2F in the base system. Deprecation Notice ------------------ OpenSSH will disable the ssh-rsa signature scheme by default in the next release. Reviewed by: imp MFC after: 1 month Relnotes: Yes Sponsored by: The FreeBSD Foundation Differential Revision: https://reviews.freebsd.org/D29985
|
#
076ad2f8 |
|
01-Mar-2017 |
Dag-Erling Smørgrav <des@FreeBSD.org> |
Upgrade to OpenSSH 7.3p1.
|
#
bc5531de |
|
19-Jan-2016 |
Dag-Erling Smørgrav <des@FreeBSD.org> |
Upgrade to OpenSSH 6.8p1.
|
#
f7167e0e |
|
31-Jan-2014 |
Dag-Erling Smørgrav <des@FreeBSD.org> |
Upgrade to OpenSSH 6.5p1.
|
#
e4a9863f |
|
21-Sep-2013 |
Dag-Erling Smørgrav <des@FreeBSD.org> |
Upgrade to 6.3p1. Approved by: re (gjb)
|
#
e3ae3b09 |
|
22-Jul-2008 |
Dag-Erling Smørgrav <des@FreeBSD.org> |
Properly flatten openssh/dist. |
#
761efaa7 |
|
30-Sep-2006 |
Dag-Erling Smørgrav <des@FreeBSD.org> |
Vendor import of OpenSSH 4.4p1. |
#
021d409f |
|
22-Mar-2006 |
Dag-Erling Smørgrav <des@FreeBSD.org> |
Vendor import of OpenSSH 4.3p1. |
#
043840df |
|
03-Sep-2005 |
Dag-Erling Smørgrav <des@FreeBSD.org> |
Vendor import of OpenSSH 4.2p1. |
#
d74d50a8 |
|
28-Oct-2004 |
Dag-Erling Smørgrav <des@FreeBSD.org> |
Vendor import of OpenSSH 3.9p1. |
#
efcad6b7 |
|
26-Feb-2004 |
Dag-Erling Smørgrav <des@FreeBSD.org> |
Vendor import of OpenSSH 3.8p1. |
#
00269670 |
|
08-Jan-2004 |
Dag-Erling Smørgrav <des@FreeBSD.org> |
Don't output the terminating '\0' (already fixed in OpenSSH CVS) |
#
d95e11bf |
|
07-Jan-2004 |
Dag-Erling Smørgrav <des@FreeBSD.org> |
Vendor import of OpenSSH 3.7.1p2. |
#
d0c8c0bc |
|
23-Apr-2003 |
Dag-Erling Smørgrav <des@FreeBSD.org> |
Vendor import of OpenSSH-portable 3.6.1p1. |
#
19261079 |
|
07-Sep-2021 |
Ed Maste <emaste@FreeBSD.org> |
openssh: update to OpenSSH v8.7p1 Some notable changes, from upstream's release notes: - sshd(8): Remove support for obsolete "host/port" syntax. - ssh(1): When prompting whether to record a new host key, accept the key fingerprint as a synonym for "yes". - ssh-keygen(1): when acting as a CA and signing certificates with an RSA key, default to using the rsa-sha2-512 signature algorithm. - ssh(1), sshd(8), ssh-keygen(1): this release removes the "ssh-rsa" (RSA/SHA1) algorithm from those accepted for certificate signatures. - ssh-sk-helper(8): this is a new binary. It is used by the FIDO/U2F support to provide address-space isolation for token middleware libraries (including the internal one). - ssh(1): this release enables UpdateHostkeys by default subject to some conservative preconditions. - scp(1): this release changes the behaviour of remote to remote copies (e.g. "scp host-a:/path host-b:") to transfer through the local host by default. - scp(1): experimental support for transfers using the SFTP protocol as a replacement for the venerable SCP/RCP protocol that it has traditionally used. Additional integration work is needed to support FIDO/U2F in the base system. Deprecation Notice ------------------ OpenSSH will disable the ssh-rsa signature scheme by default in the next release. Reviewed by: imp MFC after: 1 month Relnotes: Yes Sponsored by: The FreeBSD Foundation Differential Revision: https://reviews.freebsd.org/D29985
|
#
076ad2f8 |
|
01-Mar-2017 |
Dag-Erling Smørgrav <des@FreeBSD.org> |
Upgrade to OpenSSH 7.3p1.
|
#
bc5531de |
|
19-Jan-2016 |
Dag-Erling Smørgrav <des@FreeBSD.org> |
Upgrade to OpenSSH 6.8p1.
|
#
f7167e0e |
|
31-Jan-2014 |
Dag-Erling Smørgrav <des@FreeBSD.org> |
Upgrade to OpenSSH 6.5p1.
|
#
e4a9863f |
|
21-Sep-2013 |
Dag-Erling Smørgrav <des@FreeBSD.org> |
Upgrade to 6.3p1. Approved by: re (gjb)
|
#
e3ae3b09 |
|
22-Jul-2008 |
Dag-Erling Smørgrav <des@FreeBSD.org> |
Properly flatten openssh/dist. |
#
761efaa7 |
|
30-Sep-2006 |
Dag-Erling Smørgrav <des@FreeBSD.org> |
Vendor import of OpenSSH 4.4p1. |
#
021d409f |
|
22-Mar-2006 |
Dag-Erling Smørgrav <des@FreeBSD.org> |
Vendor import of OpenSSH 4.3p1. |
#
043840df |
|
03-Sep-2005 |
Dag-Erling Smørgrav <des@FreeBSD.org> |
Vendor import of OpenSSH 4.2p1. |
#
d74d50a8 |
|
28-Oct-2004 |
Dag-Erling Smørgrav <des@FreeBSD.org> |
Vendor import of OpenSSH 3.9p1. |
#
efcad6b7 |
|
26-Feb-2004 |
Dag-Erling Smørgrav <des@FreeBSD.org> |
Vendor import of OpenSSH 3.8p1. |
#
00269670 |
|
08-Jan-2004 |
Dag-Erling Smørgrav <des@FreeBSD.org> |
Don't output the terminating '\0' (already fixed in OpenSSH CVS) |
#
d95e11bf |
|
07-Jan-2004 |
Dag-Erling Smørgrav <des@FreeBSD.org> |
Vendor import of OpenSSH 3.7.1p2. |
#
d0c8c0bc |
|
23-Apr-2003 |
Dag-Erling Smørgrav <des@FreeBSD.org> |
Vendor import of OpenSSH-portable 3.6.1p1. |
#
a7d5f7eb |
|
19-Oct-2010 |
Jamie Gritton <jamie@FreeBSD.org> |
A new jail(8) with a configuration file, to replace the work currently done by /etc/rc.d/jail.
|
#
fe0506d7 |
|
09-Mar-2010 |
Marcel Moolenaar <marcel@FreeBSD.org> |
Create the altix project branch. The altix project will add support for the SGI Altix 350 to FreeBSD/ia64. The hardware used for porting is a two-module system, consisting of a base compute module and a CPU expansion module. SGI's NUMAFlex architecture can be an excellent platform to test CPU affinity and NUMA-aware features in FreeBSD.
|
#
d7f03759 |
|
19-Oct-2008 |
Ulf Lilleengen <lulf@FreeBSD.org> |
- Import the HEAD csup code which is the basis for the cvsmode work.
|
#
761efaa7 |
|
30-Sep-2006 |
Dag-Erling Smørgrav <des@FreeBSD.org> |
Vendor import of OpenSSH 4.4p1.
|
#
021d409f |
|
22-Mar-2006 |
Dag-Erling Smørgrav <des@FreeBSD.org> |
Vendor import of OpenSSH 4.3p1.
|
#
043840df |
|
03-Sep-2005 |
Dag-Erling Smørgrav <des@FreeBSD.org> |
Vendor import of OpenSSH 4.2p1.
|
#
d74d50a8 |
|
28-Oct-2004 |
Dag-Erling Smørgrav <des@FreeBSD.org> |
Vendor import of OpenSSH 3.9p1.
|
#
efcad6b7 |
|
26-Feb-2004 |
Dag-Erling Smørgrav <des@FreeBSD.org> |
Vendor import of OpenSSH 3.8p1.
|
#
00269670 |
|
08-Jan-2004 |
Dag-Erling Smørgrav <des@FreeBSD.org> |
Don't output the terminating '\0' (already fixed in OpenSSH CVS)
|
#
d95e11bf |
|
07-Jan-2004 |
Dag-Erling Smørgrav <des@FreeBSD.org> |
Vendor import of OpenSSH 3.7.1p2.
|
#
d0c8c0bc |
|
23-Apr-2003 |
Dag-Erling Smørgrav <des@FreeBSD.org> |
Vendor import of OpenSSH-portable 3.6.1p1.
|